PCAP02-EVA-AD - AMS AG - Datasheet.Live

1. Product profile

1.1 General description

10 W LDMOS power transistor for base station applications at frequencies from

HF to 2200 MHz

[1] Test signal: 3GPP; test model 1; 64 DPCH; PAR = 7.5 dB at 0.01 % probability on CCDF per carrier;

carrier spacing 5 MHz.

1.2 Features and benefits

Typical 2-carrier W-CDMA performance at frequencies of 2110 MHz and 2170 MHz,

a supply voltage of 28 V and an IDq of 100 mA:

Average output power = 0.7 W

Gain = 18.5 dB

Efficiency = 15 %

ACPR = 50 dBc

Typical 1-carrier W-CDMA performance at frequencies of 2110 MHz and 2170 MHz,

a supply voltage of 28 V and an IDq of 100 mA:

Average output power = 2 W

Gain = 19.3 dB

Efficiency = 31 %

ACPR = 39 dBc

Easy power control

Integrated ESD protection

Excellent ruggedness

High efficiency

BLF6G21-10G

Power LDMOS transistor

Rev. 4 — 1 September 2015 Product data sheet

Table 1. Typical performance

IDq = 100 mA; Tcase =25



C in a common source class-AB production test circuit.

Mode of operation f VDS PL(AV) GpDACPR

(MHz) (V) (W) (dB) (%) (dBc)

2-carrier W-CDMA 2110 to 2170 28 0.7 18.5 15 50[1]

1-carrier W-CDMA 2110 to 2170 28 2 19.3 31 39[1]

CAUTION

This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken

during transport and handling.

Product data sheet Rev. 4 — 1 September 2015 2 of 12

BLF6G21-10G

Power LDMOS transistor

Excellent thermal stability

No internal matching for broadband operation

Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances

(RoHS)

1.3 Applications

RF power amplifiers for GSM, PHS, EDGE, CDMA and W-CDMA base stations and

multi carrier applications in the HF to 2200 MHz frequency range

Broadcast drivers

2. Pinning information

[1] Connected to flange.

3. Ordering information

4. Limiting values

Table 2. Pinning

Pin Description Simplified outline Graphic symbol

1drain

2gate

3source [1]

sym112

Table 3. Ordering information

Type number Package

Name Description Version

BLF6G21-10G - ceramic surface-mounted package; 2 leads SOT538A

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

VDS drain-source voltage - 65 V

VGS gate-source voltage 0.5 +13 V

Tstg storage temperature 65 +150 C

Tjjunction temperature - 225 C

Product data sheet Rev. 4 — 1 September 2015 3 of 12

BLF6G21-10G

Power LDMOS transistor

5. Thermal characteristics

[1] Thermal resistance is determined under specified RF operating conditions

6. Characteristics

7. Application information

7.1 Ruggedness in class-AB operation

The BLF6G21-10G is capable of withstanding a load mismatch corresponding to

VSWR = 10 : 1 through all phases under the following conditions: VDS =28V;

f = 2140 MHz at PL=10W.

Table 5. Thermal characteristics

Symbol Parameter Conditions Typ Unit

Rth(j-case) thermal resistance from junction to case Tcase = 80 C; PL(AV) =11W [1] 3.2 K/W

Table 6. Characteristics

Tj = 25



C unless otherwise specified

Symbol Parameter Conditions Min Typ Max Unit

V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID=0.5mA 65--V

VGS(th) gate-source threshold voltage VDS = 10 V; ID=18mA 1.4 1.9 2.4 V

IDSS drain leakage current VGS = 0 V; VDS =28V - - 1.5 A

IDSX drain cut-off current VGS =V

GS(th) + 3.75 V; VDS =10V - 3.1 - A

IGSS gate leakage current VGS = 11 V; VDS =0V - - 150 nA

gfs forward transconductance VDS = 10 V; ID=0.9A - 0.5 - S

RDS(on) drain-source on-state resistance VGS =V

GS(th) + 3.75 V; ID= 0.625 A - 0.4 - 

Crs feedback capacitance VGS = 0 V; VDS =28V; f=1MHz - 0.5 - pF

Table 7. Application information

Mode of operation: 2-carrier W-CDMA; PAR 7.5 dB at 0.01 % probability on CCDF; 3GPP

test model 1; 1-64 PDPCH; f1 = 2112.5 MHz; f2 = 2117.5 MHz; f3 = 2162.5 MHz; f4= 2167.5 MHz;

RF performance at VDS = 28 V; IDq = 100 mA; Tcase = 25



C; unless otherwise spe cified; in a

class-AB production test circuit.

Symbol Parameter Conditions Min Typ Max Unit

Gppower gain PL(AV) = 0.7 W - 18.5 - dB

Ddrain efficiency PL(AV) = 0.7 W - 15 - %

ACPR adjacent channel power ratio PL(AV) = 0.7 W - 50 - dBc

Table 8. Application information

Mode of operation: 1-carrier W-CDMA; PAR 7.5 dB at 0.01 % probability on CCDF; 3GPP

test model 1; 1-64 PDPCH; f1 = 2112.5 MHz; f2 = 2167.5 MHz; RF performance at VDS =28V;

IDq = 100 mA; Tcase = 25



C; unless otherwise specified; in a class-AB production test circuit.

Symbol Parameter Conditions Min Typ Max Unit

Gppower gain PL(AV) = 2 W 17.3 19.3 - dB

Ddrain efficiency PL(AV) = 2 W 29 31 - %

ACPR adjacent channel power ratio PL(AV) = 2 W - 39 36 dBc

Product data sheet Rev. 4 — 1 September 2015 4 of 12

BLF6G21-10G

Power LDMOS transistor

7.2 CW

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 1. CW input return loss as a function of load power; typical values

PL (W)

0161248

001aal120

RLin

(dB)

(1)

(2)

(3)

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 2. CW power gain as a function of load power;

typical values

Fig 3. CW drain efficiency as a function of

load power; typical values

PL (W)

0161248

001aal121

17.5

18.5

19.5

(dB)

16.5

(1)

(2)

(3)

PL (W)

0161248

001aal122

ηD

(%)

(1)

(2)

(3)

Product data sheet Rev. 4 — 1 September 2015 5 of 12

BLF6G21-10G

Power LDMOS transistor

7.3 1-carrier W-CDMA

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 4. 1-carrier W-CDMA input return loss as a function of load power; typical values

PL (W)

04312

001aal123

RLin

(dB)

(1)

(2)

(3)

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 5. 1-carrier W-CDMA power gain as a function of

load power; typical values

Fig 6. 1-carrier W-CDMA drain efficiency as a

function of load power; typical values

PL (W)

04312

001aal124

18.8

19.2

18.4

19.6

20.0

(dB)

18.0

(1)

(2)

(3)

PL (W)

04312

001aal125

ηD

(%)

(1)

(2)

(3)

Product data sheet Rev. 4 — 1 September 2015 6 of 12

BLF6G21-10G

Power LDMOS transistor

7.4 2-carrier W-CDMA

VDS = 28 V; IDq = 100 mA; carrier spacing 5 MHz.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

VDS = 28 V; IDq = 100 mA; carrier spacing 10 MHz.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 7. 1-carrier W-CDMA adjacent channel power

ratio as a function of load power;

typical values

Fig 8. 1-carrier W-CDMA adjacent channel power

ratio as a function of load power;

typical values

PL (W)

04312

001aal126

−50

−40

−30

ACPR

(dBc)

−60

(3)

(2)

(1)

PL (W)

04312

001aal127

−60

−56

−52

ACPR

(dBc)

−64

(3)

(2)

(1)

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 9. 2-carrier W-CDMA input return loss as a function of load power; typical values

001aal128

PL (W)

0 1.81.20.6

RLin

(dB)

(1)

(2)

(3)

Product data sheet Rev. 4 — 1 September 2015 7 of 12

BLF6G21-10G

Power LDMOS transistor

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

VDS = 28 V; IDq = 100 mA.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 10. 2-carrier W-CDMA power gain as a function of

load power; typical values

Fig 11. 2-carrier W-CDMA drain efficiency as a

function of load power; typical values

001aal129

PL (W)

0 1.81.20.6

18.8

19.2

18.4

19.6

20.0

(dB)

18.0

(1)

(2)

(3)

PL (W)

0 1.81.20.6

001aal130

ηD

(%)

(1)

(2)

(3)

VDS = 28 V; IDq = 100 mA; carrier spacing 5 MHz.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

VDS = 28 V; IDq = 100 mA; carrier spacing 10 MHz.

(1) f = 2.11 GHz

(2) f = 2.14 GHz

(3) f = 2.17 GHz

Fig 12. 2-carrier W-CDMA adjacent channel power

ratio as a function of load power;

typical values

Fig 13. 2-carrier W-CDMA adjacent channel power

ratio as a function of load power;

typical values

PL (W)

0 1.81.20.6

001aal131

−50

−40

−30

ACPR

(dBc)

−60

(3)

(2)

(1)

001aal132

PL (W)

0 1.81.20.6

−50

−55

−45

−40

ACPR

(dBc)

−60

(3)

(2)

(1)

Product data sheet Rev. 4 — 1 September 2015 8 of 12

BLF6G21-10G

Power LDMOS transistor

8. Package outline

Fig 14. Package outline SOT538A

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT538A

sot538a_po

13-02-07

15-04-05

Unit

max

nom

min

2.34

2.13

1.35

1.19

5.16

5.00

4.65

4.50

5.16

5.00

4.14

3.99

0.97

0.81

0.51

0.00

Dimensions (mm are the original dimensions)

Ceramic surface-mounted package; 2 leads SOT538A

0.23

0.18

1D2E

7°

0°

θE1E2HL Qw

1z1

0.58

0.43

0.25

0.18

z3z4

4.14

3.99

7.49

7.24

0.1

0.0

1.02

0.51

3.63

3.48

2.03

1.27

0.25

0 5 mm

scale

w1B

2.5

E2E1

z4 (4×)z2 (4×)

z1 (4×)

z3 (4×)

Product data sheet Rev. 4 — 1 September 2015 9 of 12

BLF6G21-10G

Power LDMOS transistor

9. Abbreviations

10. Revision history

Table 9. Abbreviations

Acronym Description

3GPP Third Generation Partnership Project

CCDF Complementary Cumulative Distribution Function

CDMA Code Division Multiple Access

CW Continuous Wave

DPCH Dedicated Physical CHannel

EDGE Enhanced Data rates for GSM Evolution

GSM Global System for Mobile communications

HF High Frequency

LDMOS Laterally Diffused Metal Oxide Semiconductor

PAR Peak-to-Average power Ratio

PDPCH transmission Power of the Dedicated Physical CHannel

PHS Personal Handy-phone System

RF Radio Frequency

VSWR Voltage Standing Wave Ratio

W-CDMA Wideband Code Division Multiple Access

Table 10. Revision history

Document ID Release date Data sheet status Change notice Supersedes

BLF6G21-10G#4 20150901 Product data sheet - BLF6G21-10G v.3

Modifications: •The format of this document has been redesigned to comply with the new identity guidelines

of Ampleon.

•Legal texts have been adapted to the new company name where appropriate.

BLF6G21-10G v.3 20130411 Product data sheet - BLF6G21-10G v.2

BLF6G21-10G v.2 20091211 Product data sheet - BLF6G21-10G v.1

BLF6G21-10G v.1 20090511 Objective data sheet - -

Product data sheet Rev. 4 — 1 September 2015 10 of 12

BLF6G21-10G

Power LDMOS transistor

11. Legal information

11.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.ampleon.com.

11.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Ampleon does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Ampleon sales office. In

case of any inconsistency or conflict with the short data sheet, the full data

sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Ampleon and its customer, unless Ampleon and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be valid

in which the Ampleon product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

11.3 Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, Ampleon does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. Ampleon takes no responsibility for

the content in this document if provided by an information source outside of

Ampleon.

In no event shall Ampleon be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost profits,

lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Ampleon’ aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Ampleon.

Right to make changes — Ampleon reserves the right to make changes to

information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Ampleon products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction of an

Ampleon product can reasonably be expected to result in personal injury,

death or severe property or environmental damage. Ampleon and its

suppliers accept no liability for inclusion and/or use of Ampleon products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Ampleon makes no representation

or warranty that such applications will be suitable for the specified use without

further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Ampleon products, and Ampleon accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Ampleon product is suitable and

fit for the customer’s applications and products planned, as well as for the

planned application and use of customer’s third party customer(s). Customers

should provide appropriate design and operating safeguards to minimize the

risks associated with their applications and products.

Ampleon does not accept any liability related to any default, damage, costs or

problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Ampleon products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Ampleon does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Ampleon products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.ampleon.com/terms, unless otherwise agreed in a valid written

individual agreement. In case an individual agreement is concluded only the

terms and conditions of the respective agreement shall apply. Ampleon

hereby expressly objects to applying the customer’s general terms and

conditions with regard to the purchase of Ampleon products by customer.

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the grant,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contains data from the objective specification for product development.

Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

Product data sheet Rev. 4 — 1 September 2015 11 of 12

BLF6G21-10G

Power LDMOS transistor

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Ampleon product is automotive qualified, the product

is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Ampleon

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards, customer

(a) shall use the product without Ampleon’ warranty of the product for such

automotive applications, use and specifications, and (b) whenever customer

uses the product for automotive applications beyond Ampleon’ specifications

such use shall be solely at customer’s own risk, and (c) customer fully

indemnifies Ampleon for any liability, damages or failed product claims

resulting from customer design and use of the product for automotive

applications beyond Ampleon’ standard warranty and Ampleon’ product

specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

11.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

Any reference or use of any ‘NXP’ trademark in this document or in or on the

surface of Ampleon products does not result in any claim, liability or

entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of

the NXP group of companies and any reference to or use of the ‘NXP’

trademarks will be replaced by reference to or use of Ampleon’s own Any

reference or use of any ‘NXP’ trademark in this document or in or on the

surface of Ampleon products does not result in any claim, liability or

entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of

the NXP group of companies and any reference to or use of the ‘NXP’

trademarks will be replaced by reference to or use of Ampleon’s own

trademarks.

12. Contact information

For more information, please visit:

http://www.ampleon.com

For sales office addresses, please visit:

http://www.ampleon.com/sales

BLF6G21-10G

Power LDMOS transistor

For more information, please visit: http://www.ampleon.com

For sales office addresses, please visit: http://www.ampleon.com/sales

Date of release: 1 September 2015

Document identifier: BLF6G21-10G#4

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

13. Contents

1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Thermal characteristics . . . . . . . . . . . . . . . . . . 3

6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3

7 Application information. . . . . . . . . . . . . . . . . . . 3

7.1 Ruggedness in class-AB operation . . . . . . . . . 3

7.2 CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

7.3 1-carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 5

7.4 2-carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 6

8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

9 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

10 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9

11 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10

11.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10

11.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

11.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

11.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

12 Contact information. . . . . . . . . . . . . . . . . . . . . 11

13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12