Amphenol Amphenol-Tuchel Electronics GmbH Serie heavy|mate - C 146 Schwere Steckverbinder Series heavy|mate - C 146 Heavy duty connectors Das Unternehmen Amphenol-Tuchel Electronics GmbH ist ein Unternehmen der US-amerikanischen Amphenol Corporation. Unsere eigenstandige globale Prasenz im Hinblick auf Entwicklung, Produktion und Vertrieb ermoglicht es uns, fur unsere Kunden auergewohnliche technische Losungen und einen optimalen Service zu bieten. Amphenol-Tuchel Electronics GmbH ist seit Jahren ein erfolgreicher Partner seiner Kunden und setzt Mastabe in der Verbindungstechnik. The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence we offer our customers exceptional technical support and service in the areas of development, production and distribution. Amphenol-Tuchel Electronics GmbH has a successful history as a partner to our customers and sets standards for connector technology. Allgemeine Hinweise Diese Steckverbinder sind in Ubereinstimmung mit der Niederspannungsrichtlinie (73/23/EWG) und des Geratesicherheitsgesetzes entwickelt und gefertigt und entsprechen im besonderen den Normen DIN EN 61984 (VDE 0627); IEC 60664-1 (VDE 0110-1) und IEC 60529. Die Steckverbinder durfen nur entsprechend den angegebenen Bemessungsgroen eingesetzt werden. General information These connectors are designed and produced in conformity with the low voltage directive (73/23/EWG) respectively Geratesicherheitsgesetz (German law) and are especially in accordance with the standards DIN EN 61984 (VDE0627); IEC 60664-1 (VDE 0110-1) nad IEC 60529. The connectors may be used only within the technical ratings. Die angegebenen Bemaungen bei den Montageausschnitten stellen Anhaltswerte dar und sind im konkreten Anwendungsfall auf die Produkte abzustimmen. The indicated dimensions with the panel cut-outs represent reference values and are in the concrete application with products to be co-ordinated. Die Uberprufung, ob in speziellen, von uns nicht vorgesehenen Anwendungsbereichen die in diesem Katalog gezeigten Bauelemente anderen als den angegebenen Vorschriften entsprechen, obliegt dem Anwender. Konstruktionsanderungen aufgrund von Qualitatsverbesserungen, Weiterentwicklungen oder Fertigungsfordernissen behalten wir uns vor. Mit den Angaben im Katalog werden die Bauelemente spezifiziert, nicht Eigenschaften zugesichert. Weiterverwertung dieser Katalogunterlagen in jeder Form ist nur mit unserer schriftlichen Genehmigung gestattet (URHG, UWG, BGB). It is the users responsability to check whether the components illustrated in this catalogue comply with different regulations from those stated in special fields of application which we are unable to foresee. We reserve the right to modify designs in order to improve quality, keep pace with technological advancement or meet particular requirements in production. This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code). 2 Amphenol Inhaltsverzeichnis Content Seite/Page Bestellnummernsystem / Part No. system 4 5 D * Number of contacts: 24, 42, 72, 108, 216 25 DD * Bemessungsspannung 400 V * Bemessungsstrom 16 A ... 22 A * Anschlussart: vorwiegend schrauben, crimpen * Kontaktdurchmesser 2,5 mm * Polzahl: 6, 10, 16, 24, 48 * Rated voltage 400 V * Rated current 16 A ... 22 A * Termination: mainly screw, crimp * Contact diameter 2,5 mm * Number of contacts: 6, 10 ,16, 24, 48 29 E Serie C 146 EE * Polzahl: 10, 18, 32, 46 * Number of contacts: 10, 18, 32, 4 45 EE Serie C 146 E / FE / KO Steckverbinder mit Eisenkonstantan Kontakten Connectors with iron-constantan contacts 49 E/FE/KO Serie C 146 M * Modular aufgebauter Steckverbinder * Bemessungsspannung 63 - 1000 V * Bemessungsstrom 5 A ... 70 A * Anschlussart: crimpen * Polzahl: 3 - 280 * Modular connector * Rated voltage 63 - 1000 V * Rated current 5 A ... 70 A * Termination: crimp * Number of contacts: 3 - 280 53 M Serie C 146 A * Schmale Bauform * Bemessungsspannung 250 / 400 V * Bemessungsstrom 14 A ... 18 A * Anschlussart: schrauben * Polzahl: 3, 4, 10, 16, 32 * Narrow style * Rated voltage 250 / 400 V * Rated current 14 A ... 18 A * Termination: screw * Number of contacts: 3, 4, 10, 16, 32 81 A Serie C 146 HSE * Bemessungsspannung 400 V * Bemessungsstrom 42 A * Anschlussart: schrauben * Anschlussquerschnitt 6 mm2 * Polzahl: 6 * Rated voltage 400 V * Rated current 42 A * Termination: screw * Max. wire gauge 6 mm2 * Number of contacts: 6 89 HSE Serie C 146 HvE * Bemessungsspannung 660 V * Bemessungsstrom 16 A ... 22 A * Anschlussart: schrauben * 2 nacheilende Schaltkontakte * Polzahl: 3, 6, 10, 16, 20, 26, 32 * Rated voltage 660 V * Rated current 16 A ... 22 A * Termination: screw * 2 delayed mating contacts * Number of contacts: 3, 6, 10, 16, 20, 26, 32 93 HvE Serie C 146 S * Bemessungsspannung 125 - 600 V * Bemessungsstrom 10 A ... 70 A * Anschlussart: crimpen, schrauben, loten * Polzahl: 4, 57 * Rated voltage 125 - 600 V * Rated current 10 A ... 70 A * Termination: crimp, screw, solder * Number of contacts: 4, 57 Serie C 146 D * Bemessungsspannung 250 V * Bemessungsstrom 10 A ... 16 A * Anschlussart: crimpen * Kontaktdurchmesser 1,6 mm * Nach DIN EN 175 301 801 (DIN 43652) * Polzahl: 7, 15, 25, 40, 50, 64, 128 * Rated voltage 250 V * Rated current 10 A ... 16 A * Termination: crimp * Contact diameter 1,6 mm * According to DIN EN 175 301 801 (DIN 43652) * Number of contacts: 7, 15, 25, 40, 50, 64, 128 Serie C 146 DD * Polzahl: 24, 42, 72, 108, 216 Serie C 146 E S 101 Gehause / Housings 107 EMV Gehause / EMC housings 157 Zubehor / Accessories 169 Weitere Informationen/ Additional information Mazeichnungen Kontakte / Drawings of contacts 177 Sicherheitseinteilung / Safety classification 181 Allgemeine Technische Informationen / General technical information 182 Bestellnummernverzeichnis / Summary of Part Numbers 202 Amphenol 3 C 146 Bestellnummern System Part No. system Kontakteinsatze, Gehause / Contact inserts, housing C146 1) 10A 007 2) 3) 000 4) 2 5) C 6) 1) Serie Series 2) Type Type A = Stifteinsatz / male insert B = Buchseneinsatz / female insert F = Gehauseunterteil, PG / housing, PG N = Gehauseunterteil, metrisch / housing, metric G = Gehauseoberteil, PG / hood, PG R = Gehauseoberteil, metrisch / hood, metric Z = Schutzdeckel / cover 3) Polzahl Number of contacts z. B. 007 = 7 pol e. g. 007 = 7 contacts 4) Ausfuhrungsvariante Design version 5) Serie Series 1 = E Serie / E series + FE / KO Serie / FE / KO series 2 = D Serie / D series 3 = HVE Serie / HVE series 4 = A Serie / A series 5 = HSE Serie / HSE series 6 = S Serie / S series 8 = M Serie / M series 9 = DD Serie / DD series 10 = EE Serie / EE series 6) Verpackungseinheit Packing unit X = 10 C = 100 M = 1000 Kontakte / Contacts V 1) N 01 2) 016 0002 3) 4) 1) Lieferausfuhrung: Supplied as: (1) 5) V = Einzelkontakt 100 Stuck Single pack 100 pcs. Z = Bandkontakt mit 100, 200 oder 500 Kontakten Contacts on reel 100, 200 or 500 contacts H = Bandkontakte mit 2000 Kontakten fur Crimpmaschinen (Kontaktzufuhrung rechts) Contacts on reel with 2000 contacts for crimping machines (contact feeding right hand side) T = Bandkontakte mit 2000 Kontakten fur Crimpmaschinen (Kontaktzufuhrung links) Contacts on reel with 2000 contacts for crimping machines (contact feeding left hand side) 2) Kontaktart: Type of contact: N 01 = Kontaktstift / male contact N 02 = Kontaktbuchse / female contact 3) Kontaktgroe Contact size z. B. 016 = 1,6 mm e. g. 016 = 1,6 mm 4) Ausfuhrungsvariante Design version 5) Oberflache: Plating: (1) = versilbert / silver plated (2) = vergoldet (auf Anfrage) / gold plated (upon request) Bitte beachten Sie die entsprechenden Zusatztexte Please notice additional description 4 Amphenol D C 146 D Hauptmerkmale Main characteristics * Bemessungsspannung 250 V * Bemessungsstrom 10 A ... 16 A * Anschlussart: crimpen * Kontaktdurchmesser 1,6 mm * nach DIN EN 175 301-801 (DIN 43652) * Polzahl: 7, 15, 25, 40, 50, 64, 128 * Rated voltage 250 V * Rated current 10 A ... 16 A * Termination: crimp * Contact diameter 1,6 mm * According to DIN EN 175 301-801 (DIN 43652) * Number of contacts: 7, 15, 25, 40, 50, 64, 128 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics SEV 250 V, 10 A UL 600 V, 10 A 600 V, 15 A (Hochstrom / High current) E 63093 CSA 600 V, 10 A 48932 Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol Zulassungs-Nummer / Approval-No. In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 5 C 146 D Kurzinformation Brief information Allgemeine Hinweise * Kontakteinsatze ohne Crimpkontakte, Crimpwerkzeuge siehe separater Katalog Werkzeuge". * Kontakte mussen separat bestellt werden, Verarbeitungs- und Montagehinweise siehe Katalog Werkzeuge". * Fur die Einsatze der Serie C 146 D werden die hohen Gehausebauformen empfohlen. * Steckverbinder der Serie C 146 D durfen unter Spannung, jedoch nicht unter Strom betatigt werden. Werden die Steckverbinder unter Last gesteckt und getrennt, ist der Strom auf 15 % des Bemessungsstroms zu begrenzen. * Fur Kontakteinsatze fur gedrehte Kontakte werden Fuhrungsstifte und Fuhrungsbuchsen empfohlen (siehe Seite 174). * Bei Verwendung der Kontakteinsatze mit zwei PE-Anschlussen ohne Gehause ist darauf zu achten, dass jeweils die gegenuberliegenden PE-Anschlusse miteinander verbunden werden. General information * Contact inserts without crimp contacts, crimping tools see separate catalogue Tools". * Contacts must be ordered separately, processing instructions see catalogue Tools". * We recommend using the high profile housings / hoods for the C146 D inserts. * Connectors series C146 D may be engaged or disengaged when live but without electrical load. If these connectors are mated or unmated under load, the load shall be reduced to 15 % of the rated current. * For contact inserts for turned contacts, guide pins and guide socket are recommended (see page 174). * By using contact inserts with two PE-connections without hoods, it is neccessary to connect the facing of each PE-connection. Genormte Steckverbinder nach DIN EN 175 301 - 801 (DIN 43652) Steck- und austauschbar mit allen Fremdfabrikaten nach Norm. a) Kontakteinsatz/Kontakteinsatz 15, 25, 40, 64 pol. b) Kontakteinsatz/Gehause 15, 25, 40, 64 pol. Standardised connectors according to DIN EN 175 301 - 801 (DIN 43652) Interchangeable with all other products which are according to the standard. a) Contact insert to contact insert 15, 25, 40, 64 way. b) Contact insert to housing 15, 25, 40, 64 way. Hoher Schutz vor Fehlsteckungen Buchsenkontakteinsatz mit trichterformiger, verengter Steckoffnung. Hohe Steck- und Kontaktsicherheit mit gestanzten Kontakten. High protection against mismating Female inserts with funnel shaped contact entry avoids mismating with stamped contacts. Kontakteinsatze fur gestanzte Kontakte und fur gedrehte Kontakte Contact inserts for stamped contacts and for turned contacts Voreilender Schutzkontakt First-to-mate last-to-break protective ground contact Bei Verwendung von Schutzleitern mit Querschnitten <1mm2 ist ein geeigneter Kabelschuh zu verwenden. When usind PE wire with a cross section <1mm2, a cable lug schould be used. Groe Gehauseauswahl in 2 Bauhohen (ab Seite 107) Large range of housings in 2 different heights (see page 107) 6 Amphenol C 146 D D Crimp Technik Crimp technology Groer Crimpbereich Hauptmerkmale der gestanzten Crimpkontakte Main characteristics of the stamped crimp contacts .N01 016 0003 (1) 1) .N01 016 0002 (1) 1) .N01 016 0005 (1) 1) Large range of wire gauges Gasdichte Verbindung (Kaltverschweiung) Gas-tight (coldwelding) 0,14 0,25 0,5 Gestanzte Crimpkontakte mit Isolierungshalterung um mechanische Beanspruchung von der Crimpverbindung fernzuhalten 0,5 1,0 1,5 1,5 2,5 Isolierungshalterung Insulation grip Stamped crimp contacts with insulation crimp, to absorbe mechanical stress from the crimped connection Mechanischer Rasthakenanschlag bei Buchsen- und Stiftkontakt Buchsenkontakt Female contact Stiftkontakt Male contact Einfache Montage Mechanical retention spring stop on female and male contact Easy assembly Kostengunstige, einfache Verarbeitung Werkzeuge siehe Katalog Werkzeuge" Economical and easy processing Tools see catalogue Tools" Service-Anwendungen Service application Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Standardkontakt, Anschlussquerschnitt 2,5 mm2 Standard contact, wire gauge 2.5 mm2 1) 1) Serie Series Strombelastbarkeit I (A) Current carrying capacity I (A) High current carrying capacity (see derating curves) Kleinserie Small series Beispiel Einzelkontakt / Example single contact Strombelastbarkeit I (A) Current carrying capacity I (A) Hohe Strombelastbarkeit (siehe Derating Kurven) Einzel-Fertigung Single production Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Hochstromkontakt, Anschlussquerschnitt 2,5 mm2 High current contact, wire gauge 2.5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol 7 C 146 D Technische Daten Characteristics Kontakteinsatze / Connector inserts Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts Kontaktanordnung Contact arrangement Anschlusstechnik Termination technique crimpen / crimp, wire wrap Max. Leiterdurchmesser Max. wire diameter 4,1 mm Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung 3) 7+PE/8 15 25 40 * * * DIN EN 175 301-801 (DIN 43652) 50 2 x 25 64 2128 x 64 * UL 94 V-0 Rated voltage IEC 60664-1 250 V~ (400 V~ 1)) (600 V UL / CSA 5)) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 III b Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 4 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2,2 kV Strombelastbarkeit Rated current IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Bemessungsstrom Tu = 40 C Rated current Tamb = 40 C Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 4) Luftstrecke Clearance IEC 60664-1 > 3,5 mm Kriechstrecke Creepage IEC 60664-1 > 4,6 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft Insertion and withdrawal forces IEC 60512-7; Test 13 b IP-Schutzart Stifteinsatz IP-degree of protection pin insert IEC 60529 IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 Gewicht Stifteinsatz Weight pin insert 8g 28 g 34 g 53 g 68 g 65 g 130 g Gewicht Buchseneinsatz Weight socket insert 8g 30 g 38 g 64 g 76 g 82 g 164 g Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Kontakteinsatz Insert Farbe Colour 16 A 12 A 12 A 10 A 10 A 10 A 10 A IEC 60512-5; Test 9 a 10-15 20-30 40-60 60-90 80-120 100-150 200-300 N N N N N N N ungesteckt/unmated gesteckt/mated IP00 IP20 ungesteckt/unmated gesteckt/mated IP20 IP20 500 Steckzyklen / mating cycles PBTP PC GV 2) grau / grey 1) bei modifizierter Kontaktanordnung, siehe Seite 24 / modified contact arrangement, see page 24 Polycarbonat-glasfaserverstarkt / polycarbonat-glas fibre filled 3) Einschrankung fur 8 pol mit Metallgehause siehe Seite 10 / Restriction for 8 contacts in metal housing see page 10 4) bei Beanspruchung > 10 10 / Under operating condition > 10 10 5) Hinweisschild fur CSA-Anwendung siehe Seite 176 / Label for CSA application see page 176 2) 8 Amphenol C 146 D D Technische Daten Characteristics Gestanzte Crimpkontakte / Stamped crimp contacts Elektrische Kennwerte Electrical Characteristics Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5m Kapazitat Kontakt-Kontakt Capacity contact-contact IEC 60512-9; Test 22 a 2pF Kapazitat Kontakt-Gehause Capacity contact-housing IEC 60512-9; Test 22 a 3,2 p F Klimatische Kennwerte Climatical Characteristics Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Stiftkontakt Male contact Cu Zn (Messing /brass) Buchsenkontakt Female contact Cu Sn (Zinnbronze / Tin bronce) Kontaktoberflache Contact plating Ag (silber / silver) Gedrehte Crimpkontakte / Turned crimp contacts Elektrische Kennwerte Electrical Characteristics Durchgangswiderstand Contact resistance Klimatische Kennwerte Climatical Characteristics Obere Grenztemperatur IEC 60512-2 5m Upper temperature IEC 60512-6 + 100 C Untere Grenztemperatur Lower temperature IEC 60512-6 - 40 C Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Stiftkontakt Male contact Cu Zn (Messing / brass) Buchsenkontakt Female contact Cu Zn (Messing / brass) Kontaktoberflache Contact plating Ag (silber / silver) Amphenol 9 C 146 D 7+ ,8 250 V~ in Kunststoffgehause in thermoplastic housings 42 V~ in Metallgehause in metal housings Gehause siehe Seite 110-113 Housings see page 110-113 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert Kontakteinsatz / Contact insert 7+ C146 10A007 000 2 1) (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B007 000 2 1) (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A007 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B007 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10A008 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B008 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A008 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B008 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) Buchseneinsatz Female insert Stifteinsatz Male insert Buchseneinsatz Female insert 250 V ~ nur fur Kunststoffgehause only for thermoplastic housings Kontakteinsatz / Contact insert 8 pol Stifteinsatz Male insert Buchseneinsatz Female insert Stifteinsatz Male insert Buchseneinsatz Female insert 42 V ~ Kontaktanordnung / Contact arrangement 7+ Stifteinsatz / Male insert 8 pol Buchseneinsatz / Female insert Stifteinsatz / Male insert PE Schutzkontakt voreilend Protective earthing contact preleading 1) Hinweis: Note: Buchseneinsatz / Female insert PE PE-Kontakt, bei Einsatz bis 42 V~ als Arbeitskontakt verwendbar. For use up to 42 V~, the PE contact can be used as regular contact. auch erhaltlich als Gropackung, 100 Stuck ... 000 2C" / also available for big volume, 100 pcs. ... 000 2C" 10 Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 7+ ,8 Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Standard Hochstrom High current Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Gestanzte Einzelkontakte / Stamped single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 D VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1) C VN01 016 0025 (1) C VN01 016 0026 (1) C VN01 016 0027 (1) C VN01 016 0028 (1) C VN02 016 0024 (1) C VN02 016 0025 (1) C VN02 016 0026 (1) C VN02 016 0027 (1) C VN02 016 0028 (1) C VN01 016 0024 (2) C VN01 016 0025 (2) C VN01 016 0026 (2) C VN01 016 0027 (2) C VN01 016 0028 (2) C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2) C VN02 016 0025 (2) C VN02 016 0026 (2) C VN02 016 0027 (2) C VN02 016 0028 (2) C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 11 C 146 D 250 V~ 10 A/15 A DIN EN 175 301-801 (DIN 43652) 15 + Steckverbinder Connectors Gehause siehe Seite 114-117 Housings see page 114-117 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert Stifteinsatz Male insert C146 10A015 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B015 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A015 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B015 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10A015 009 2 C146 10B015 009 2 C146 10A015 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B015 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) Buchseneinsatz Female insert Wickelanschluss 2) Wire wrap termination Stifteinsatz Male insert Kontakteinsatz 2 X PE Anschluss 1) Contact insert 2 X PE termination 1) Stifteinsatz Male insert Buchseneinsatz Female insert Buchseneinsatz Female insert Montageanleitung, Ansicht von Steckverbinder-Anschlussseite Assembly instructions, view from termination side Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) 1) Beim Einbau der Steckverbinder in nicht leitende Gehause sind beide Schutzleiter (Ausfuhrung 2 x PE) anzuschlieen. If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted. 2) IP-Schutzart im Anschlussbereich IP 00 IP-degree of protection on termination side IP 00 12 Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 15 + Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Standard Hochstrom High current Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Gestanzte Einzelkontakte / Stamped single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 D VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1) C VN01 016 0025 (1) C VN01 016 0026 (1) C VN01 016 0027 (1) C VN01 016 0028 (1) C VN02 016 0024 (1) C VN02 016 0025 (1) C VN02 016 0026 (1) C VN02 016 0027 (1) C VN02 016 0028 (1) C VN01 016 0024 (2)C VN01 016 0025 (2)C VN01 016 0026 (2)C VN01 016 0027 (2)C VN01 016 0028 (2)C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2)C VN02 016 0025 (2)C VN02 016 0026 (2)C VN02 016 0027 (2)C VN02 016 0028 (2)C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 13 C 146 D 250 V~ 10 A/15 A DIN EN 175 301-801 (DIN 43 652) 25 + Steckverbinder Connectors Gehause siehe Seite 118-121 Housings see page 118-121 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert Stifteinsatz Male insert C146 10A025 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B025 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A025 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B025 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10A025 009 2 C146 10B025 009 2 C146 10A025 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B025 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) Buchseneinsatz Female insert Wickelanschluss2) Wire wrap termination Stifteinsatz Male insert Kontakteinsatz 2 X PE Anschluss 1) Contact insert 2 X PE termination 1) Stifteinsatz Male insert Buchseneinsatz Female insert Buchseneinsatz Female insert Montageanleitung, Ansicht von Steckverbinder-Anschlussseite Assembly instructions, view from termination side Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) 1) Beim Einbau der Steckverbinder in nicht leitende Gehause sind beide Schutzleiter (Ausfuhrung 2 x PE) anzuschlieen. If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted. 2) IP-Schutzart im Anschlussbereich IP 00 IP-degree of protection on termination side IP 00 14 Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 25 + Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck D 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Pieces Gestanzte Einzelkontakte / Stamped single contacts Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1) C VN01 016 0025 (1) C VN01 016 0026 (1) C VN01 016 0027 (1) C VN01 016 0028 (1) C VN02 016 0024 (1) C VN02 016 0025 (1) C VN02 016 0026 (1) C VN02 016 0027 (1) C VN02 016 0028 (1) C VN01 016 0024 (2) C VN01 016 0025 (2) C VN01 016 0026 (2) C VN01 016 0027 (2) C VN01 016 0028 (2) C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2) C VN02 016 0025 (2) C VN02 016 0026 (2) C VN02 016 0027 (2) C VN02 016 0028 (2) C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 15 C 146 D 250 V~ 10 A/15 A DIN EN 175 301-801 (DIN 43 652) 40 + Steckverbinder Connectors Gehause siehe Seite 138-145 Housings see page 138-145 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert Stifteinsatz Male insert C146 10A040 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B040 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A040 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B040 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10A040 009 2 C146 10B040 009 2 C146 10A040 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B040 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) Buchseneinsatz Female insert Wickelanschluss 3) Wire wrap termination Stifteinsatz Male insert Kontakteinsatz 2 X PE Anschluss 1) Contact insert 2 X PE termination 1) Stifteinsatz Male insert Buchseneinsatz Female insert Buchseneinsatz Female insert Montageanleitung, Ansicht von Steckverbinder-Anschlussseite / Assembly instructions, view from termination side Stifteinsatz Male insert 1) Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Beim Einbau der Steckverbinder in nicht leitende Gehause sind beide Schutzleiter (Ausfuhrung 2 x PE) anzuschlieen. If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted. 3) IP-Schutzart im Anschlussbereich IP 00 IP-degree of protection on termination side IP 00 16 2) Fur Gehause mit niedriger Bauform / for low profile housings Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 40 + Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Standard Hochstrom High current Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gestanzte Einzelkontakte / Stamped single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 D VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Bestell Nr.1) Stiftkontakt Male contact Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1)C VN01 016 0025 (1)C VN01 016 0026 (1)C VN01 016 0027 (1)C VN01 016 0028 (1)C VN02 016 0024 (1)C VN02 016 0025 (1)C VN02 016 0026 (1)C VN02 016 0027 (1)C VN02 016 0028 (1)C VN01 016 0024 (2)C VN01 016 0025 (2)C VN01 016 0026 (2)C VN01 016 0027 (2)C VN01 016 0028 (2)C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2)C VN02 016 0025 (2)C VN02 016 0026 (2)C VN02 016 0027 (2)C VN02 016 0028 (2)C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 17 C 146 D 250 V~ 10 A/15 A 50 + Steckverbinder Connectors Gehause siehe Seite 122-125 Housings see page 122-125 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert Stifteinsatz Male insert C146 10A025 000 2 + C146 10A025 005 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B025 000 2 + C146 10B025 005 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A025 500 2 + C146 10A025 505 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B025 500 2 + C146 10B025 505 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) Buchseneinsatz Female insert Montageanleitung, Ansicht von Steckverbinder-Anschlussseite / Assembly instructions, view from termination side Stifteinsatz Male insert 18 Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 50 + Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Standard Hochstrom High current Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Gestanzte Einzelkontakte / Stamped single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 D VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1) C VN01 016 0025 (1) C VN01 016 0026 (1) C VN01 016 0027 (1) C VN01 016 0028 (1) C VN02 016 0024 (1) C VN02 016 0025 (1) C VN02 016 0026 (1) C VN02 016 0027 (1) C VN02 016 0028 (1) C VN01 016 0024 (2) C VN01 016 0025 (2) C VN01 016 0026 (2) C VN01 016 0027 (2) C VN01 016 0028 (2) C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2) C VN02 016 0025 (2) C VN02 016 0026 (2) C VN02 016 0027 (2) C VN02 016 0028 (2) C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 19 C 146 D 250 V~ 10 A/15 A DIN EN 175 301-801 (DIN 43 652) 64 + Steckverbinder Connectors Gehause siehe Seite 146-153 Housings see page 146-153 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert Stifteinsatz Male insert C146 10A064 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B064 000 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A064 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B064 500 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10A064 009 2 C146 10B064 009 2 C146 10A064 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B064 060 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) Buchseneinsatz Female insert Wickelanschluss 3) Wire wrap termination Stifteinsatz Male insert Kontakteinsatz 2 X PE Anschluss 1) Contact insert 2 X PE termination 1) Stifteinsatz Male insert Buchseneinsatz Female insert Buchseneinsatz Female insert Montageanleitung, Ansicht von Steckverbinder-Anschlussseite / Assembly instructions, view from termination side Stifteinsatz Male insert 1) Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Beim Einbau der Steckverbinder in nicht leitende Gehause sind beide Schutzleiter (Ausfuhrung 2 x PE) anzuschlieen. If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted. 3) IP-Schutzart im Anschlussbereich IP 00 IP-degree of protection on termination side IP 00 20 2) Fur Gehause mit niedriger Bauform / for low profile housings Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 64 + Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Standard Hochstrom High current Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gestanzte Einzelkontakte / Stamped single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 D VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Bestell Nr.1) Stiftkontakt Male contact Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1)C VN01 016 0025 (1)C VN01 016 0026 (1)C VN01 016 0027 (1)C VN01 016 0028 (1)C VN02 016 0024 (1)C VN02 016 0025 (1)C VN02 016 0026 (1)C VN02 016 0027 (1)C VN02 016 0028 (1)C VN01 016 0024 (2)C VN01 016 0025 (2)C VN01 016 0026 (2)C VN01 016 0027 (2)C VN01 016 0028 (2)C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2)C VN02 016 0025 (2)C VN02 016 0026 (2)C VN02 016 0027 (2)C VN02 016 0028 (2)C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 21 C 146 D 250 V~ 10 A/15 A 128 + Steckverbinder Connectors Gehause auf Anfrage Housings upon request Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert Stifteinsatz Male insert C146 10A064 000 2 + C146 10A064 005 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10B064 000 2 + C146 10B064 005 2 (fur gestanzte Crimpkontakte) (for stamped crimp contacts) C146 10A064 500 2 + C146 10A064 505 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) C146 10B064 500 2 + C146 10B064 505 2 (fur gedrehte Crimpkontakte) (for turned crimp contacts) Buchseneinsatz Female insert Montageanleitung, Ansicht von Steckverbinder-Anschlussseite / Assembly instructions, view from termination side Stifteinsatz Male insert 22 Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 D 128 + Gestanzte Bandkontakte fur Crimpzangen Stamped contacts on reel for hand crimping tools Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Closed turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Standard Hochstrom High current Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Gestanzte Einzelkontakte / Stamped single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 versilbert / silver plating 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 100 100 100 100 100 D VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Bestell Nr.1) Stiftkontakt Male contact Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1)C VN01 016 0025 (1)C VN01 016 0026 (1)C VN01 016 0027 (1)C VN01 016 0028 (1)C VN02 016 0024 (1)C VN02 016 0025 (1)C VN02 016 0026 (1)C VN02 016 0027 (1)C VN02 016 0028 (1)C VN01 016 0024 (2)C VN01 016 0025 (2)C VN01 016 0026 (2)C VN01 016 0027 (2)C VN01 016 0028 (2)C TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Gedrehte Crimpkontakte / Turned crimp contacts 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Einzelkontakt Single contact VN02 016 0024 (2)C VN02 016 0025 (2)C VN02 016 0026 (2)C VN02 016 0027 (2)C VN02 016 0028 (2)C Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c d e 1) 1) Kontakt / Contact Standard gestanzt Standard stamped Hochstrom gestanzt High current, stamped Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 1,5 mm2 2,5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curve a b c Kontakt / Contact Standard gedreht Standard turned Querschnitt / Wire gauge 0,5 mm2 1,5 mm2 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 23 C 146 D Information Information (15) Modifizierte Kontaktanordnung fur Bemessungsspannungen von 400 V 7+ (25) 11 + Modified contact arrangement for rated voltages of 400 V (40) 20 + (64) 32 + = Arbeitskontakt full load contact = Leerstelle unoccupied Losen der Kontakte 1) Demontage von Steckseite / front releas Removal of contacts 1) * gestanzte Buchsenkontakte Stamped female contacts Prinzip: * gestanzte Stiftkontakte Stamped male contacts * gedrehte Kontakte Turned contacts Werkzeuge / Tools 1) Bezeichnung / Decription 1) fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0300 146 1 Service Crimpzange Service crimping tool 0,14 - 0,5 mm2 0,5 - 1,5 mm2 - - TA 0100 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 TA 0001 146 000 1 TA 0002 146 000 1 TA 0007 146 000 3 TA 0000 202 TA 0000 163 TA 0000 141 TA 0000 TA 0500 Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" 24 Amphenol C 146 DD DD Hauptmerkmale Main characteristics * Bemessungsspannung 250 V * Bemessungsstrom 8 A ... 9 A * Anschlussart: crimpen * Polzahl: 24, 42, 72, 108 * Rated voltage 250 V * Rated current 8 A ... 9 A * Termination: crimp * Number of contacts: 24, 42, 72, 108 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics SEV 250 V, 10 A UL 600 V, 8,5 A E 63093 CSA 600 V, 20 A LR 700721 Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol Zulassungs-Nummer / Approval-No. In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 25 C 146 DD 250 V~ 8/ 9A Steckverbinder Connectors fur gedrehte Kontakte for turned contacts Gehause siehe Seite 126-153 Housings see page 126-153 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert 24 + Stifteinsatz Male insert C146 10A024 000 9 C146 10B024 000 9 C146 10A042 000 9 C146 10B042 000 9 C146 10A072 000 9 C146 10B072 000 9 C146 10A108 000 9 C146 10B108 000 9 Buchseneinsatz Female insert Kontakteinsatz Contact insert 42 + Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz Contact insert 72 + Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz Contact insert 108 + Stifteinsatz Male insert Buchseneinsatz Female insert 26 Amphenol C 146 DD Steckverbinder Connectors Crimpkontakte Crimp contacts Gedrehte 1,6 mm Kontakte Turned 1,6 mm contacts DD Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Contact insert 216 + Stifteinsatz Male insert C146 10A108 000 9 + C146 10A108 005 9 C146 10B108 000 9 + C146 10B108 005 9 Buchseneinsatz Female insert fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Gedrehte Einzelkontakte / Turned single contacts 2 0,14 - 0,37 mm 26 - 22 100 100 20 0,5 mm2 0,75 - 1,0 mm2 20 - 16 100 16 - 15 100 1,5 mm2 2 100 14 2,5 mm Montageanleitung, Steckbild / Assembly instruction, pin layout Einzelkontakt Single contact Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating VN01 016 0024 (1) C VN02 016 0024 (1) C VN01 016 0025 (1) C VN02 016 0025 (1) C VN01 016 0026 (1) C VN02 016 0026 (1) C VN01 016 0027 (1) C VN02 016 0027 (1) C VN01 016 0028 (1) C VN02 016 0028 (1) C Bestell Nr.1) Stiftkontakt Male contact Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 016 0024 (2) C VN02 016 0024 (2) C VN01 016 0025 (2) C VN02 016 0025 (2) C VN01 016 0026 (2) C VN02 016 0026 (2) C VN01 016 0027 (2)C VN02 016 0027 (2)C VN01 016 0028 (2)C VN02 016 0028 (2)C Buchseneinsatz Female insert Stifteinsatz Male insert Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve / Curves a b c d 1) 1) Polzahl / Contacts 24 42 72 108 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Querschnitt / Wire gauge 0,75 mm2 0,75 mm2 0,75 mm2 0,75 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Kurve / Curves a b c d Polzahl / Contacts 24 42 72 108 Querschnitt / Wire gauge 1,5 mm2 1,5 mm2 1,5 mm2 1,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 27 C 146 DD Technische Daten Characteristics 1) Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 24 + Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,14 mm2 - 2,5 mm2 Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung Norm / Standard Wert / Value 42 + 72 + 108 + UL 94 V-0 Rated voltage IEC 60664-1 250 V (600 V UL / CSA) Verschmutzungsgrad Pollution degree IEC 60664-1 2 (3 in gestecktem + verriegeltem Zustand) 2 (3 mated and locked) Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 Isolierstoffgruppe Material group IEC 60664-1 III b Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 4 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Bemessungsstrom Tu = 40 C Rated current Tamb = 40 C Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 1) Luftstrecke Clearance VDE 0627 > 2,5 mm Kriechstrecke Creepage VDE 0627 > 4 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 100 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Gewicht Stifteinsatz Weight pin insert IP-Schutzart Stifteinsatz IP-degree of protection pin insert IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 Gewicht Buchseneinsatz Weight socket insert Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Kontakteinsatz Insert PBT Kontakte Contacts CuZn (Messing / brass) Kontaktoberflache Contact plating Ag Farbe Colour grau / grey III 9A 44 g IEC 60529 50 g ungesteckt/unmated IP00 ungesteckt/unmated IP20 41 g IEC 60512-5; Test 9 a 9A 50 g 8A 8A 63 g 86 g gesteckt/mated IP20 gesteckt/mated IP20 67 g 88 g 500 Steckzyklen / mating cycles Bei Beanspruchung > 1010 / Under operating conditions > 1010 28 Amphenol C 146 E E Hauptmerkmale Main characteristics * Bemessungsspannung 400 V * Bemessungsstrom 16 A ... 22 A * Anschlussart: schrauben oder crimpen * Kontaktdurchmesser 2,5 mm * Polzahl: 6, 10 ,16, 24, 48 * Rated voltage 400 V * Rated current 16 A ... 22 A * Termination: screw or crimp * Contact diameter 2,5 mm * Numbers of contacts: 6, 10, 16, 24, 48 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics SEV 400 V, 16 A UL 600 V, 10 A E 63093 CSA 600 V, 15 A 48932 DB 400 V, 16 A BN 74 018 Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol Zulassungs-Nummer / Approval-No. In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 29 C 146 E Kurzinformation Brief information Allgemeine Hinweise * Kontakteinsatze ohne Crimpkontakte (bei Kontakteinsatz mit Crimpanschluss). * Steckverbinder der Serie C 146 E durfen unter Spannung, jedoch nicht unter Strom betatigt werden. Werden die Steckverbinder unter Last gesteckt und getrennt, ist der Strom auf 10 % des Bemessungsstromes zu begrenzen. * Crimpwerkzeuge und Verarbeitungshinweise siehe separater Katalog Werkzeuge". * Fur die Einsatze der Serie C 146 E konnen sowohl niedrige, wie auch hohe Gehausebauformen verwendet werden. * Bei Verwendung von Aderendhulsen, sind Schraubanschlusseinsatze ohne Drahtschutz zu bevorzugen. General information * Contact inserts without crimp contacts. * Connectors series C146 E may be engaged or disengaged when live but without electrical load. If these connectors are mated or unmated under load, the load shall be reduced to 10 % of the rated current. * Crimping tools and processing instructions see separate catalogue Tools". * Low and high profile housings are usable. * If wire ferrule are used, screw terminals without wire protection are prefered. Nicht genormte Steckverbinder, aber: Steck- und austauschbar mit Fremdfabrikaten a) Kontakteinsatz/Kontakteinsatz 6, 10, 16, 24 pol. b) Kontakteinsatz/Gehause 6, 10, 16, 24 pol. Gehause nach DIN EN 175 301 - 801 No standard for this series, but: Interchangeable with other products a) contact insert to contact insert 6, 10, 16, 24 contacts b) contact insert to housing 6, 10 ,16, 24 contacts Housings are designed according to DIN EN 175 301 - 801 Hoher Schutz vor Fehlsteckungen Buchsenkontakteinsatz mit trichterformiger, verengter Steckoffnung. (Hohe Steck- und Kontaktsicherheit) High protection against mismating Female inserts with funnel shaped contact entry avoids mismating. Kontakteinsatze fur Schraubanschluss, Schraubanschluss mit Drahtschutz und fur Crimptechnik Contact inserts for screw termination, screw termination with wire protection and for crimp termination Schraubanschluss Screw termination Schraubanschluss mit Drahtschutz Screw termination with wire protection Crimpanschluss Crimp termination Voreilender Schutzkontakt First-to-mate last-to-break protective ground contact Groe Gehauseauswahl in 2 Bauhohen (ab Seite 126) Large range of housings in 2 different heights (see page 126) 30 Amphenol C 146 E Crimp Technik Crimp technology Hauptmerkmale der gestanzten Crimpkontakte Main characteristics of the stamped crimp contacts .N01 025 0001 (1) 1) Groer Crimpbereich Gasdichte Verbindung (Kaltverschweiung) .N01 025 0010 (1) 1) E Large range of wire gauges Gas-tight (coldwelding) 0,5 1,0 Gestanzte Crimpkontakte mit Isolierungshalterung um mechanische Beanspruchungen von der Crimpverbindung fernzuhalten 1,5 1,5 2,5 Isolierungshalterung Insulation grip Stamped crimp contacts with insulation crimp to absorbe mechnical stress from the crimped connection Mechanischer Rasthakenanschlag bei Buchsen- und Stiftkontakt Buchsenkontakt Female contact Stiftkontakt Male contact Mechanical retention spring stop on female and male contact Kostengunstige, einfache Verarbeitung. Werkzeuge siehe Katalog Werkzeuge" Economical and easy processing. Tools see catalogue Tools" Einzel-Fertigung Single production Kleinserie Small series Beispiel Einzelkontakt, Anschlussquerschnitt 2,5 mm2 High current carrying capacity (see derating curves) Example single contact, wire gauge 2.5 mm2 Strombelastbarkeit I (A) Current carrying capacity I (A) Hohe Strombelastbarkeit (siehe Derating Kurven) Serie Series Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 1) Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Amphenol 31 C 146 E Technische Daten Characteristics Kontakteinsatze / Connector inserts Allgemeine Kennwerte General Characteristics Norm / Standard Polzahl Number of contacts 6+ Anschlusstechnik Termination technique crimpen / schrauben Anschlussquerschnitt: crimpen, schrauben Wire gauge: crimp, screw 1) 3) Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung Wert / Value 10 + 0,5 - 4 mm 16 + 2 24 + 48 + crimp / screw 0,25 - 2,5 mm2 UL 94 V-O Rated voltage IEC 60664-1 400 V (600 V UL / CSA 2)) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Isolierstoffgruppe Material group IEC 60664-1 III b Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2,8 kV Strombelastbarkeit Current carrying capacity IEC 60512-2; Test 5 b siehe Derating Kurven / see derating curves Bemessungsstrom (Tu = 40 C) Rated current (Tamb = 40 C) Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a < 5 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 2 a 10 12 1) Luftstrecke Clearance DIN VDE 0627 > 4,0 mm Kriechstrecke Creepage DIN VDE 0627 > 6,3 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Gesamt Steck- und Ziehkraft crimpen schrauben 3) IP-Schutzart Stifteinsatz Insertion and withdrawal forces: crimp screw IP-degree of protection pin insert 3) IP-degree of protection socket insert IEC 60529 IP-Schutzart Buchseneinsatz III 22 A 19 A 19 A 18 A 18 A IEC 60512-7; Test 13 b 10-20 N 30-40 N 45-60 N 70-100 N 140-200 N 20-30 N 40-50 N 80-100 N 100-120 N 200-240 N IEC 60529 ungesteckt/unmated IP00 ungesteckt/unmated IP20 gesteckt/mated IP20 gesteckt/mated IP20 Gewicht: Stifteinsatz crimp (gestantzte Kontakte) Buchseneinsatz crimp (gest. Kontakte) Stifteinsatz schraub Buchseneinsatz schraub Weight: male insert crimp (f. stamped contacts) female insert crimp (f. stamped contacts) male insert screw female insert screw Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Kontakteinsatz Insert PC GV (Polycarbonat) Schraubkontakte Screw contacts CuZn (Messing/brass) Kontaktoberflache Contact plating Ag (silber/silver) Farbe Colour grau / grey 33 g 33 g 43 g 43 g IEC 60512-5; Test 9 a 39 g 39 g 57 g 57 g 45 g 49 g 78 g 78 g 55 g 62 g 105 g 106 g 110 g 124 g 210 g 212 g > 500 Steckzyklen / mating cycles Bei Beanspruchung > 10 10 / Under operating conditions 10 10 2) Hinweisschild fur CSA-Anwendungen siehe Seite 176 / Label for CSA application see page 176 IP-Schutzart im Anschlussbereich der Schraubausfuhrung IP 10 / IP-degree of protection on termination side of screw version IP 10 32 Amphenol C 146 E Technische Daten Characteristics Gestanzte Crimpkontakte / Stamped crimp contacts E Elektrische Kennwerte Electrical Characteristics Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a <5m Kapazitat Kontakt-Kontakt Capacity contact-contact IEC 60512-9; Test 22 a 2pF Kapazitat Kontakt-Gehause Capacity contact-housing IEC 60512-9; Test 22 a 3,2 p F Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Stiftkontakt Male contact CuZn (Messing /brass) Buchsenkontakt Female contact CuSn (Zinnbronze / Tin bronce) Kontaktoberflache Contact plating Ag Gedrehte Crimpkontakte / Turned crimp contacts Elektrische Kennwerte Electrical Characteristics Durchgangswiderstand Contact resistance Klimatische Kennwerte Climatical Characteristics Obere Grenztemperatur IEC 60512-2 5m Upper temperature IEC 60512-6 + 100 C Untere Grenztemperatur Lower temperature IEC 60512-6 - 40 C Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyclen / mating cycles Werkstoffe Materials Stiftkontakt Male contact CuZn (Messing /brass) Buchsenkontakt Female contact CuZn (Messing /brass) Kontaktoberflache Contact plating Ag Amphenol 33 C 146 E 6+ Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure 400 V~ Kontakteinsatz fur gestanzte Kontakte / Contact insert for stamped contacts 500 V~ Kontakteinsatz fur Schraubanschluss und fur gedrehte Kontakte / Contact insert for screw termination and for turned contacts 16 / 22 A Gehause siehe Seite 126-129 Housings see page 126-129 Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert C146 10A006 002 1 C146 10B006 002 1 Buchseneinsatz Female insert C146 10A006 102 1 (mit Drahtschutz with wire protection) C146 10B006 102 1 (mit Drahtschutz with wire protection) Stifteinsatz Male insert C146 10A006 000 1 C146 10B006 000 1 C146 10A006 500 1 C146 10B006 500 1 Kontakteinsatz Schraubanschluss Contact insert screw termination Kontakteinsatz fur gestanzte Kontakte Contact insert for stamped contacts Buchseneinsatz Female insert Kontakteinsatz fur gedrehte Kontakte Contact insert for turned contacts Stifteinsatz Male insert Buchseneinsatz Female insert 34 Amphenol Gestanzte Einzelkontakte Gestanzte Bandkontakte fur Crimpzangen Gestanzte Bandkontakte fur Crimpmaschinen Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines C 146 E 6+ 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gestanzte Einzelkontakte / Stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact 20 - 16 100 16- 14 100 Part No.1) Buchsenkontakt Female contact E vergoldet / gold plating VN01 025 0001 (101) VN02 025 0001 (101) VN01 025 0001 (102) VN02 025 0001 (102) VN01 025 0010 (101) VN02 025 0010 (101) VN01 025 0010 (102) VN02 025 0010 (102) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 200 16 - 14 100 ZN01 025 0001 (1) ZN02 025 0001 (1) ZN01 025 0001 (2) ZN02 025 0001 (2) ZN01 025 0010 (1) ZN02 025 0010 (1) ZN01 025 0010 (2) ZN02 025 0010 (2) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,5 - 1,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 1,5 - 2,5 mm2 20 - 16 16 - 14 20 - 16 16 - 14 2000 2000 2000 2000 HN01 025 0001 (1) HN01 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) 20 18 16 14 12 100 100 100 100 100 VN01 025 0035 (1)C VN01 025 0036 (1)C VN01 025 0037 (1)C VN01 025 0038 (1)C VN01 025 0039 (1)C VN02 025 0035 (1)C VN02 025 0036 (1)C VN02 025 0037 (1)C VN02 025 0038 (1)C VN02 025 0039 (1)C Gedrehte Crimpkontakte / Turned crimp contacts Einzelkontakt Single contact 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 4,0 mm2 VN01 025 0035 (2)C VN01 025 0036 (2)C VN01 025 0037 (2)C VN01 025 0038 (2)C VN01 025 0039 (2)C VN02 025 0035 (2)C VN02 025 0036 (2)C VN02 025 0037 (2)C VN02 025 0038 (2)C VN02 025 0039 (2)C Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a: 1,5 mm2 Leiterquerschnitt Curve a: 1,5 mm2 wire gauge 1) Schraubanschluss Screw termination Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Strombelastbarkeit I (A) Current carrying capacity I (A) Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b: 2,5 mm2 Leiterquerschnitt Curve b: 2,5 mm2 wire gauge Abisolierlangen siehe S. 198 Stripping length see p. 198 35 C 146 E 10 + Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure 400 V~ Kontakteinsatz fur gestanzte Kontakte / Contact insert for stamped contacts 500 V~ Kontakteinsatz fur Schraubanschluss und fur gedrehte Kontakte / Contact insert for screw termination and for turned contacts 16 / 22 A Gehause siehe Seite 130-137 Housings see page 130-137 Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert C146 10A010 002 1 C146 10B010 002 1 Buchseneinsatz Female insert C146 10A010 102 1 (mit Drahtschutz with wire protection) C146 10B010 102 1 (mit Drahtschutz with wire protection) Stifteinsatz Male insert C146 10A010 000 1 C146 10B010 000 1 C146 10A010 500 1 C146 10B010 500 1 Kontakteinsatz Schraubanschluss Contact insert screw termination Kontakteinsatz fur gestanzte Kontakte Contact insert for stamped contacts Buchseneinsatz Female insert Kontakteinsatz fur gedrehte Kontakte Contact insert for turned contacts Stifteinsatz Male insert Buchseneinsatz Female insert 36 Amphenol Gestanzte Einzelkontakte Gestanzte Bandkontakte fur Crimpzangen Gestanzte Bandkontakte fur Crimpmaschinen Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines C 146 E 10 + 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Gestanzte Einzelkontakte / Stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 20 - 16 100 16- 14 100 Part No.1) Buchsenkontakt Female contact E vergoldet / gold plating VN01 025 0001 (101) VN02 025 0001 (101) VN01 025 0001 (102) VN02 025 0001 (102) VN01 025 0010 (101) VN02 025 0010 (101) VN01 025 0010 (102) VN02 025 0010 (102) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 200 16 - 14 100 ZN01 025 0001 (1) ZN02 025 0001 (1) ZN01 025 0001 (2) ZN02 025 0001 (2) ZN01 025 0010 (1) ZN02 025 0010 (1) ZN01 025 0010 (2) ZN02 025 0010 (2) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,5 - 1,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 1,5 - 2,5 mm2 20 - 16 16 - 14 20 - 16 16 - 14 2000 2000 2000 2000 HN01 025 0001 (1) HN01 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) VN01 025 0035 (1)C VN01 025 0036 (1)C VN01 025 0037 (1)C VN01 025 0038 (1)C VN01 025 0039 (1)C VN02 025 0035 (1)C VN02 025 0036 (1)C VN02 025 0037 (1)C VN02 025 0038 (1)C VN02 025 0039 (1)C Gedrehte Crimpkontakte / Turned crimp contacts 100 20 0,5 mm2 100 0,75 - 1,0 mm2 18 100 16 1,5 mm2 100 14 2,5 mm2 2 100 12 4,0 mm Montageanleitung, Steckbild / Assembly instruction, pin layout Einzelkontakt Single contact Stifteinsatz Male insert Buchseneinsatz Female insert VN01 025 0035 (2)C VN01 025 0036 (2)C VN01 025 0037 (2)C VN01 025 0038 (2)C VN01 025 0039 (2)C VN02 025 0035 (2)C VN02 025 0036 (2)C VN02 025 0037 (2)C VN02 025 0038 (2)C VN02 025 0039 (2)C Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a: 1,5 mm2 Leiterquerschnitt Curve a: 1,5 mm2 wire gauge 1) Schraubanschluss Screw termination Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Strombelastbarkeit I (A) Current carrying capacity I (A) Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b: 2,5 mm2 Leiterquerschnitt Curve b: 2,5 mm2 wire gauge Abisolierlangen siehe S. 198 Stripping length see p. 198 37 C 146 E 16 + Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure 400 V~ Kontakteinsatz fur gestanzte Kontakte / Contact insert for stamped contacts 500 V~ Kontakteinsatz fur Schraubanschluss und fur gedrehte Kontakte / Contact insert for screw termination and for turned contacts 16 / 22 A Gehause siehe Seite 138-145 Housings see page 138-145 Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert C146 10A016 002 1 C146 10B016 002 1 Buchseneinsatz Female insert C146 10A016 102 1 (mit Drahtschutz with wire protection) C146 10B016 102 1 (mit Drahtschutz with wire protection) Stifteinsatz Male insert C146 10A016 000 1 C146 10B016 000 1 C146 10A016 500 1 C146 10B016 500 1 Kontakteinsatz Schraubanschluss Contact insert screw termination Kontakteinsatz fur gestanzte Kontakte Contact insert for stamped contacts Buchseneinsatz Female insert Kontakteinsatz fur gedrehte Kontakte Contact insert for turned contacts Stifteinsatz Male insert Buchseneinsatz Female insert 38 Amphenol Gestanzte Einzelkontakte Gestanzte Bandkontakte fur Crimpzangen Gestanzte Bandkontakte fur Crimpmaschinen Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines C 146 E 16 + 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gestanzte Einzelkontakte / Stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact 20 - 16 100 16- 14 100 Part No.1) Buchsenkontakt Female contact E vergoldet / gold plating VN01 025 0001(101) VN02 025 0001 (101) VN01 025 0001 (102) VN02 025 0001(102) VN01 025 0010(101) VN02 025 0010 (101) VN01 025 0010 (102) VN02 025 0010(102) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 200 16 - 14 100 ZN01 025 0001 (1) ZN02 025 0001 (1) ZN01 025 0001 (2) ZN02 025 0001 (2) ZN01 025 0010 (1) ZN02 025 0010 (1) ZN01 025 0010 (2) ZN02 025 0010 (2) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,5 - 1,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 1,5 - 2,5 mm2 20 - 16 16 - 14 20 - 16 16 - 14 2000 2000 2000 2000 HN01 025 0001 (1) HN01 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) 20 18 16 14 12 100 100 100 100 100 VN01 025 0035 (1)C VN01 025 0036 (1)C VN01 025 0037 (1)C VN01 025 0038 (1)C VN01 025 0039 (1)C VN02 025 0035 (1)C VN02 025 0036 (1)C VN02 025 0037 (1)C VN02 025 0038 (1)C VN02 025 0039 (1)C Gedrehte Crimpkontakte / Turned crimp contacts Einzelkontakt Single contact 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 4,0 mm2 VN01 025 0035 (2)C VN01 025 0036 (2)C VN01 025 0037 (2)C VN01 025 0038 (2)C VN01 025 0039 (2)C VN02 025 0035 (2)C VN02 025 0036 (2)C VN02 025 0037 (2)C VN02 025 0038 (2)C VN02 025 0039 (2)C Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a: 1,5 mm2 Leiterquerschnitt Curve a: 1,5 mm2 wire gauge 1) Schraubanschluss Screw termination Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Strombelastbarkeit I (A) Current carrying capacity I (A) Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b: 2,5 mm2 Leiterquerschnitt Curve b: 2,5 mm2 wire gauge Abisolierlangen siehe S. 198 Stripping length see p. 198 39 C 146 E 24 + Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure 400 V~ Kontakteinsatz fur gestanzte Kontakte / Contact insert for stamped contacts 500 V~ Kontakteinsatz fur Schraubanschluss und fur gedrehte Kontakte / Contact insert for screw termination and for turned contacts 16 / 22 A Gehause siehe Seite 146-153 Housings see page 146-153 Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert C146 10A024 002 1 C146 10B024 002 1 Buchseneinsatz Female insert C146 10A024 102 1 (mit Drahtschutz with wire protection) C146 10B024 102 1 (mit Drahtschutz with wire protection) Stifteinsatz Male insert C146 10A024 000 1 C146 10B024 000 1 C146 10A024 500 1 C146 10B024 500 1 Kontakteinsatz Schraubanschluss Contact insert screw termination Kontakteinsatz fur gestanzte Kontakte Contact insert for stamped contacts Buchseneinsatz Female insert Kontakteinsatz fur gedrehte Kontakte Contact insert for turned contacts Stifteinsatz Male insert Buchseneinsatz Female insert 40 Amphenol Gestanzte Einzelkontakte Gestanzte Bandkontakte fur Crimpzangen Gestanzte Bandkontakte fur Crimpmaschinen Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines C 146 E 24 + 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gestanzte Einzelkontakte / Stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact 20 - 16 100 16- 14 100 Part No.1) Buchsenkontakt Female contact E vergoldet / gold plating VN01 025 0001(101) VN02 025 0001 (101) VN01 025 0001 (102) VN02 025 0001(102) VN01 025 0010(101) VN02 025 0010 (101) VN01 025 0010 (102) VN02 025 0010(102) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 ZN01 025 0001 (1) ZN02 025 0001 (1) ZN01 025 0001 (2) ZN02 025 0001 (2) ZN01 025 0010 (1) ZN02 025 0010 (1) ZN01 025 0010 (2) ZN02 025 0010 (2) 20 - 16 200 16 - 14 100 Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,5 - 1,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 1,5 - 2,5 mm2 20 - 16 16 - 14 20 - 16 16 - 14 2000 2000 2000 2000 HN01 025 0001 (1) HN01 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) VN01 025 0035 (1)C VN01 025 0036 (1)C VN01 025 0037 (1)C VN01 025 0038 (1)C VN01 025 0039 (1)C VN02 025 0035 (1)C VN02 025 0036 (1)C VN02 025 0037 (1)C VN02 025 0038 (1)C VN02 025 0039 (1)C Gedrehte Crimpkontakte / Turned crimp contacts 100 20 0,5 mm2 100 0,75 - 1,0 mm2 18 100 16 1,5 mm2 100 14 2,5 mm2 2 100 12 4,0 mm Montageanleitung, Steckbild / Assembly instruction, pin layout Einzelkontakt Single contact Stifteinsatz Male insert Buchseneinsatz Female insert VN01 025 0035 (2)C VN01 025 0036 (2)C VN01 025 0037 (2)C VN01 025 0038 (2)C VN01 025 0039 (2)C VN02 025 0035 (2)C VN02 025 0036 (2)C VN02 025 0037 (2)C VN02 025 0038 (2)C VN02 025 0039 (2)C Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a: 1,5 mm2 Leiterquerschnitt Curve a: 1,5 mm2 wire gauge 1) Schraubanschluss Screw termination Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Strombelastbarkeit I (A) Current carrying capacity I (A) Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b: 2,5 mm2 Leiterquerschnitt Curve b: 2,5 mm2 wire gauge Abisolierlangen siehe S. 198 Stripping length see p. 198 41 C 146 E 48 + Steckverbinder Connectors 400 V~ Kontakteinsatz fur gestanzte Kontakte / Contact insert for stamped contacts 500 V~ Kontakteinsatz fur Schraubanschluss und fur gedrehte Kontakte / Contact insert for screw termination and for turned contacts 16 / 22 A Gehause auf Anfrage Housings upon request Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss Contact insert screw termination Stifteinsatz Male insert C146 10A024 002 1 + C146 10A024 002 1 C146 10B024 002 1 + C146 10B024 002 1 C146 10A024 102 1 + C146 10A024 102 1 C146 10B024 102 1 + C146 10B024 102 1 C146 10A024 000 1 + C146 10A024 005 1 C146 10B024 000 1 + C146 10B024 005 1 C146 10A024 500 1 + C146 10A024 505 1 C146 10B024 500 1 + C146 10B024 505 1 Buchseneinsatz Female insert Kontakteinsatz Schraubanschluss mit Drahtschutz Contact insert screw termination with wire protection Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz fur gestanzte Kontakte Contact insert for stamped contacts Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz fur gedrehte Kontakte Contact insert for turned contacts Stifteinsatz Male insert Buchseneinsatz Female insert 42 Amphenol Gestanzte Einzelkontakte Gestanzte Bandkontakte fur Crimpzangen Gestanzte Bandkontakte fur Crimpmaschinen Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines C 146 E 48 + 200 / 100 Stuck 200 / 100 pcs Gedrehte Einzelkontakte Turned single contacts Crimpkontakte Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gestanzte Einzelkontakte / Stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact 20 - 16 100 16- 14 100 Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 025 0001(101) VN02 025 0001 (101) VN01 025 0001 (102) VN02 025 0001(102) VN01 025 0010(101) VN02 025 0010 (101) VN01 025 0010 (102) VN02 025 0010(102) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 200 16 - 14 100 ZN01 025 0001 (1) ZN02 025 0001 (1) ZN01 025 0001 (2) ZN02 025 0001 (2) ZN01 025 0010 (1) ZN02 025 0010 (1) ZN01 025 0010 (2) ZN02 025 0010 (2) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,5 - 1,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 1,5 - 2,5 mm2 20 - 16 16 - 14 20 - 16 16 - 14 2000 2000 2000 2000 HN01 025 0001 (1) HN01 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) 20 18 16 14 12 100 100 100 100 100 VN01 025 0035 (1)C VN01 025 0036 (1)C VN01 025 0037 (1)C VN01 025 0038 (1)C VN01 025 0039 (1)C VN02 025 0035 (1)C VN02 025 0036 (1)C VN02 025 0037 (1)C VN02 025 0038 (1)C VN02 025 0039 (1)C Gedrehte Crimpkontakte / Turned crimp contacts Einzelkontakt Single contact 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 4,0 mm2 VN01 025 0035 (2)C VN01 025 0036 (2)C VN01 025 0037 (2)C VN01 025 0038 (2)C VN01 025 0039 (2)C VN02 025 0035 (2)C VN02 025 0036 (2)C VN02 025 0037 (2)C VN02 025 0038 (2)C VN02 025 0039 (2)C Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a: 1,5 mm2 Leiterquerschnitt Curve a: 1,5 mm2 wire gauge 1) Schraubanschluss Screw termination Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Strombelastbarkeit I (A) Current carrying capacity I (A) Gedrehte Kontakte Turned contacts Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Gestanzte Kontakte Stamped contacts Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b: 2,5 mm2 Leiterquerschnitt Curve b: 2,5 mm2 wire gauge Abisolierlangen siehe S. 198 Stripping length see p. 198 43 E C 146 E Werkzeuge 1) Tools 1) Bezeichnung / Description 1) 2) fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Werkzeuge / Tools Losewerkzeug fur gestanzte Kontakte Removal tool for stamped contacts - - - FG 0200 146 1 Crimpzange fur gestanzte Einzelkontakte Crimping tool for stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 TA 0004 146 000 1 TA 0005 146 000 3 TA 0000 163 TA 0000 141 TA 0000 4-Kerb Crimpzange fur gedrehte Kontakte 4-indent crimping tool for turned contacts 0,5 - 4,0 mm2 - - TB 0600 146 2) Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" Incl. Prufstiftset + Kontaktaufnahme / incl. calibration pin set + contact locator 44 Amphenol C 146 EE EE Hauptmerkmale Main characteristics * Bemessungsspannung 500 V (600 V UL / CSA) * Bemessungsstrom 16 A * Anschlusstechnik: crimpen * Polzahl: 10, 18, 32, 46 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics Zulassungs-Nummer / Approval-No. UL 600 V, 15 A E 63093 CSA 600 V, 16 A 172062-1027396 (LR 48323-2) Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 45 C 146 EE 500 V~ 16 A Connectors fur gedrehte Kontakte for turned contacts Gehause siehe Seite 126-153 Housings see page 126-153 Bezeichnung Description Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz 10 + Contact insert 10 + Stifteinsatz Male insert C146 10A010 500 10 C146 10B010 500 10 C146 10A018 500 10 C146 10B018 500 10 C146 10A032 500 10 C146 10B032 500 10 C146 10A046 500 10 C146 10B046 500 10 Buchseneinsatz Female insert Kontakteinsatz 18 + Contact insert 18 + Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz 32 + Contact insert 32 + Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz 46 + Contact insert 46 + Stifteinsatz Male insert Buchseneinsatz Female insert Montageanleitung / Assembly instruction Montageausschnitt (Kontakttrager) Panel cut out (insert) 46 Amphenol C 146 EE Crimp contacts Gedrehte 2,5 mm Kontakte Turned 2,5 mm contacts Steckbild, Ansicht Anschlussseite / Pin Layout, View from termination side Buchseneinsatz Female insert Stifteinsatz Male insert 8 9 10 6 4 7 5 1 2 3 1 2 3 4 6 5 7 Stifteinsatz Male insert Buchseneinsatz Female insert 10 6 8 9 10 14 15 16 17 18 1 2 3 4 5 14 15 16 17 18 13 9 Steckbild C 146 EE 10 pol Steckbild Gehausegroe / Shell size E6 9 13 C 146 EE 18 pol fur LeiterAWG querschnitt for wire gauge Gedrehte Crimpkontakte / Turned Crimp Contacts Einzelkontakte Single contact 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 4,0 mm2 20 18 16 14 12 24 25 26 27 28 29 30 31 32 23 16 Steckbild Gehausegroe / Shell size E10 Lieferform Supplied as Buchseneinsatz Female insert 17 10 6 10 1 2 3 4 5 Stifteinsatz Male insert Stuckzahl Pieces Stifteinsatz Male insert 10 17 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 16 23 24 14 24 25 26 27 28 29 30 31 32 C 146 EE 32 pol 34 35 36 37 38 39 40 41 42 43 44 45 46 33 23 Steckbild Gehausegroe / Shell size E16 Bestell Nr.1) Stiftkontakt Male contact 14 24 1 2 3 4 5 6 7 8 9 10 11 12 13 VN01 025 0035 (1) C VN01 025 0036 (1) C VN01 025 0037 (1) C VN01 025 0038 (1) C VN01 025 0039 (1) C Part No.1) Buchsenkontakt Female contact 23 33 34 35 36 37 38 39 40 41 42 43 44 45 46 EE C 146 EE 46 pol Bestell Nr.1) Stiftkontakt Male contact Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN02 025 0035 (1) C VN02 025 0036 (1) C VN02 025 0037 (1) C VN02 025 0038 (1) C VN02 025 0039 (1) C Kontaktlosewerkzeug Contact removal tool 1 2 3 4 5 6 7 8 9 10 11 12 13 Gehausegroe / Shell size E24 versilbert / silver plating 100 100 100 100 100 Buchseneinsatz Female insert VN01 025 0035 (2) C VN01 025 0036 (2) C VN01 025 0037 (2) C VN01 025 0038 (2) C VN01 025 0039 (2) C VN02 025 0035 (2) C VN02 025 0036 (2) C VN02 025 0037 (2) C VN02 025 0038 (2) C VN02 025 0039 (2) C FG 0300 146 (7) Derating Kurven / Derating curves C146 EE 18 pol Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) C146 EE 10 pol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) C146 EE 46 pol Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) C146 EE 32 pol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a: 0,5 mm2 Anschlussquerschnitt Curve a: 0,5 mm2 wire gauge Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b: 2,5 mm2 Anschlussquerschnitt Curve b: 2,5 mm2 wire gauge Kurve c: 4,0 mm2 Anschlussquerschnitt Curve c: 4,0 mm2 wire gauge Abisolierlangen siehe S. 198 / Stripping length see p. 198 Amphenol 47 C 146 EE Technische Daten Characteristics 1) Norm / Standard Wert / Value Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 10 + Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,5 mm2 - 4,0 mm2 Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung 18 + 32 + 46 + UL 94 V-0 Rated voltage IEC 60664-1 500 V (600 V UL / CSA) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 III b Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 3 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Bemessungsstrom Tu = 40 C Rated current Tamb = 40 C Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 1) Luftstrecke Clearance IEC 60664-1 > 5,5 mm Kriechstrecke Creepage IEC 60664-1 > 10 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 100 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles IP-Schutzart Stifteinsatz IP-degree of protection pin insert IEC 60529 IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 Werkstoffe Materials Kontakteinsatz Insert PC Kontakte Contacts CuZn (Messing / brass) Kontaktoberflache Contact plating Ag (silber / silver) Farbe Colour grau / grey 16 A ungesteckt/unmated IP00 ungesteckt/unmated IP20 gesteckt/mated IP20 gesteckt/mated IP20 Bei Beanspruchung > 1010 / Under operating conditions > 1010 48 Amphenol C 146 E/FE/KO E/FE/KO Hauptmerkmale Main characteristics * Bemessungsspannung 400 V * Material Kontakte: Eisen-Konstantan * Bemessungsstrom 10 A * Polzahl: 6, 10, 16, 24 * Rated voltage 400 V * Material contacts: iron-constantan * Rated current 10 A * Number of contacts: 6, 10, 16, 24 Amphenol 49 C 146 E/FE/KO Kurzinformation Brief information Bezeichnung - Abbildung Description - Figure Steckverbinder mit Eisen-(FE) und Konstantan(KO)Kontaktelementen finden vornehmlich in der Steuer- und Regeltechnik ihren Einsatz, und zwar dort, wo es gilt, zwischen Eisen- bzw. Konstantan-Leitungen Schnittstellen" zu schaffen. FE/KO-Kabel werden ublicherweise als Verbindungsglied zwischen Thermoelement und Regelgerat eingesetzt. Z. B. : Messen und Regeln der Temperatur in Kunststoff-Spritzformen Spritzformen (Heikanal-Anspritzung) mittels Thermofuhler und elektronischem Regelgerat. Durch das Einbringen von FE/KO-Steckverbindern in die Thermofuhlerleitung" werden die Messergebnisse verfeinert, d. h. die Regelungenauigkeit wird stark reduziert. Soll-Wert-Abweichung bei verschiedenen KontaktwerkstoffPaarungen Amphenol's Industial Connectors with iron (FE) an Contantan (CO) contacts are used to connect FE/CO thermocouples with electronic signal amplifiers in measuring and control circuits, i. e. for temperature control of moulding machines. Errors with various combinations Kontaktwerkstoffe Soll.-Temp. ohne Thermo-Kontakte mit Thermo-Kontakte MS/FE MS/KO FE/FE KO/KO Nominal Temp. MS/FE MS/KO FE/FE KO/KO 100 C +4% - 16 % -4% -2% 100 C +4% - 16 % -4% -2% 200 C + 2,5 % -8% -3% - 1,5 % 200 C + 2,5 % -8% -3% - 1,5 % 300 C + 1,3 % - 12,7 % - 1,3 % 0% 300 C + 1,3 % - 12,7 % - 1,3 % 0% 400 C + 1,5 % - 4,5 % - 1,0 % 0% 400 C + 1,5 % - 4,5 % - 1,0 % 0% Die Werte sind auf eine Umgebungstemperatur von 100 C bezogen. Die Ursache der Sollwert-Abweichung (Ubertragungsverlust) bei Steckverbindern mit Messingkontakten liegt in der selbsterzeugenden Thermospannung (hervorgerufen durch den Wechsel von FE-Draht zu Messing-Kontaktelement) bzw. durch die Temperaturschwankungen an den Kontaktelementen. Einsatz von Thermo-Werkstoffen in Abhangigkeit der Messtemperatur 50 Connectors with iron (FE) and constantan (CO) contacts are basically used in measuring and control circuits to serve as interface between FE/CO thermocouples and control unit, i. e. temperature control of moulds in injection moulding machines. Through the use of FE/CO connectors in the thermocouple circuit the measuring results are more accurate, thus the tolerance of the temperature control is much narrower. Contact Material without Thermo Contacts with Thermo Contacts The connection of unlike metals (FE/Brass and CO/Brass) generate thermoelectric voltage errors in the mesuring circuit caused by the flow from iron wire to the brass contact or by temperature changes at the contact elements. By using FE/CO contacts respectively these deviations will be minimized. Material / Temperature Range Temperaturbereich Temperaturbereich Temperatur range Material/measurement procedure < 150 C beliebig / Widerstandsmessung < 150 C any/Resistance measurement 150 C - 450 C FE-KO (Eisen/Konstantan) 150 C - 450 C FE-CO (iron/Constantan) 450 C - ca. 1000 C Ni/Cr - Ni (Nickel/Cromleg./Nickel) 450 C - approx. 1000 C Ni/Cr-Ni (Nickel/Chrome/Nickel) Faktoren, die das Messergebnis zusatzlich beeinflussen * schwankende Umgebungstemperaturen (am Steckverbinder) Temperature changes cause errors: Messstelle C Nominale Temp.C Umgebungstemperatur mV/C mV/C Ambient temperature Amphenol C 146 E / FE / KO Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 6+ Anschlusstechnik Termination technique schrauben / screw Anschlussquerschnitt Wire gauge 0,25 mm2 - 2,5 mm2 Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung Norm / Standard Wert / Value 10 + UL 94 V- 0 Rated voltage IEC 60664-1 400 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 III b Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2,8 kV Bemessungsstrom Tu = 40 C Rated current Tamb = 40 C IEC 60512-3 10 A Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 10 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 1) Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 100 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft Insertion and withdrawal forces IEC 60512-7; Test 13 b < 40 N 2) IP-Schutzart Stifteinsatz IP-degree of protection pin insert IEC 60529 2) IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 16 + 24 + E/FE/KO < 70 N ungesteckt/unmated IP00 ungesteckt/unmated IP20 < 95 N < 165 N gesteckt/mated IP20 gesteckt/mated IP20 Gewicht Stifteinsatz Weight pin insert 45 g 60 g 78 g 105 g Gewicht Buchseneinsatz Weight socket insert 45 g 60 g 78 g 105 g Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Material Kontakteinsatz Material insert PA, GV (Polyamid) Material Kontakte Material contacts Eisen / iron; gal cd 4 IEC 60512-5; Test 9 a 100 Steckzyklen / mating cycles Konstantan = roh; constantan = without plating Farbton 1) 2) Colour grau / grey RAL 7032 Bei Beanspruchung >10 10 / Under operating conditions > 10 10 IP-Schutzart im Anschlussbereich der Schraubausfuhrung IP 10 / IP-degree of protection on termination side of screw version IP 10 Amphenol 51 C 146 E FE-KO 6 -24 + Gehause siehe Seite 126-153 Housings see page 126-153 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Kontakteinsatz 6 + Contact insert 6 + Steckverbinder mit Eisen-Konstantan-Kontakten Connectors with iron-constantan contacts 1) 1) Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert C146 10A006 810 1 C146 10B006 810 1 C146 10A010 810 1 C146 10B010 810 1 C146 10A016 810 1 C146 10B016 810 1 C146 10A024 810 1 C146 10B024 810 1 Buchseneinsatz Female insert Kontakteinsatz 10 + Contact insert 10 + 1) 1) Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz 16 + Contact insert 16 + 1) 1) Stifteinsatz Male insert Buchseneinsatz Female insert Kontakteinsatz 24 + Contact insert 24 + 1) 1) Stifteinsatz Male insert Buchseneinsatz Female insert Steckbild / pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Stifteinsatz Male insert Buchseneinsatz Female insert Stifteinsatz Male insert Buchseneinsatz Female insert Stifteinsatz Male insert Buchseneinsatz Female insert 6+ 10 + Eisenkontakt / iron contact Konstantankontakt / constantan contact 1) 16 + 24 + mit Drahtschutz / with wire protection 52 Amphenol C 146 M M A Hauptmerkmale Main characteristics * Modular aufgebauter Steckverbinder * Bemessungsspannung 63 - 1000 V * Bemessungsstrom 5 A ... 70 A * Anschlussart: crimpen * Polzahl: 3 - 280 * Modular connector * Rated voltage 63 - 1000 V * Rated current 5 A ... 70 A * Termination: crimp * Number of contacts: 3 - 280 Zulassungen / Approvals Prufstelle / Testhouse Zulassungs-Nummer / Approval-No. VDE 56 79 UG BGZ Kennwerte siehe Bemessungsspannung und Bemessungsstrom S. 61 VBG 70 Characteristics see rated voltage and rated current page 61 E 63093 SEV UL CSA Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol 48932 In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 53 C 146 M Kurzinformation Brief information Allgemeine Hinweise General information * Module ohne Crimpkontakte, Crimpwerkzeuge siehe separater Katalog Werkzeuge". * Kontakte mussen separat bestellt werden, Verarbeitungs- und Montagehinweise siehe Katalog Werkzeuge". * Fur die Einsatze der Serie C 146 M werden die hohen Gehausebauformen empfohlen. * Steckverbinder der Serie C 146 M durfen unter Spannung, jedoch nicht unter Strom betatigt werden. Werden die Steckverbinder unter Last gesteckt und getrennt, ist der Strom auf 10 % des Bemessungsstroms zu begrenzen. * Leere Modulplatze sind durch Blindmodule aufzufullen. * Drehmoment fur PE-Anschluss 1,8 Nm * Modules inserts without crimp contacts, crimping tools see separate catalogue Tools". * Contacts must be ordered separatly, processing instructions see catalogue Tools". * We recommend using the high profile housings / hoods for the C146 M inserts. * Connectors series C 146 M may be engaged or disengaged when live but without electrical load. If these connectors are mated or unmated under load, the load shall be reduced to 10 % of rated current. * Empty modul spaces have to be filled with blind modules. * Torque for PE connection 1,8 Nm Systemvorteile * Viele Kombinationsmoglichkeiten * Inverse Bestuckung moglich * Bemessungsspannung bis 1000 V * Kostengunstig Advantages of the system * High combination possibilities * Possibility of inverse configuration * Rated voltage up to 1000 V * Low cost Hoher Schutz vor Fehlsteckungen * Buchsenkontakteinsatz mit trichterformiger, verengter Steckoffnung. * Hohe Steck- und Kontaktsicherheit bei 10 pol. Modul mit gestanzten Kontakten. High protection against mismating * Female inserts with funnel shaped contact entry avoids mismating. * High security in mating and contacting with stamped crimp contacts for 10 pin module. 10 pol. Module fur gestanzte Kontakte und fur gedrehte Kontakte 10 pin modules for stamped contacts and for turned contacts Voreilender Schutzkontakt Mindest Anschlussquerschnitt 0,5 mm2 First-to-mate last-to-break protective ground contact Minimum wire size 0,5 mm2 Groe Gehauseauswahl in 2 Bauhohen (ab Seite 126) Large range of housings in 2 different heights (see page 126) 54 Amphenol C 146 M Crimp Technik Crimp technology Groer Crimpbereich Hauptmerkmale der gestanzten Crimpkontakte Main characteristics of the stamped crimp contacts .N01 016 0003 (1) 1) .N01 016 0002 (1) 1) .N01 016 0005 (1) 1) Large range of wire gauges Gasdichte Verbindung (Kaltverschweiung) Gas-tight (coldwelding) 0,14 0,25 0,5 Gestanzte Crimpkontakte mit Isolierungshalterung um mechanische Beanspruchung von der Crimpverbindung fernzuhalten 0,5 1,0 1,5 1,5 2,5 Isolierungshalterung Insulation grip M Stamped crimp contacts with insulation crimp, to absorbe mechanical stress from the crimped connection Mechanischer Rasthakenanschlag bei Buchsen- und Stiftkontakt A Buchsenkontakt Female contact Stiftkontakt Male contact Einfache Montage Mechanical retention spring stop on female and male contact Easy assembly Kostengunstige, einfache Verarbeitung Werkzeuge siehe Katalog Werkzeuge" Economical and easy processing Tools see catalogue Tools" Service-Anwendungen Service application Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Standardkontakt, Anschlussquerschnitt 2,5 mm2 Standard contact, wire gauge 2.5 mm2 1) 1) Serie Series Strombelastbarkeit I (A) Current carrying capacity I (A) High current carrying capacity (see derating curves) Kleinserie Small series Beispiel Einzelkontakt / Example single contact Strombelastbarkeit I (A) Current carrying capacity I (A) Hohe Strombelastbarkeit (siehe Derating Kurven) Einzel-Fertigung Single production Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Hochstromkontakt, Anschlussquerschnitt 2,5 mm2 High current contact, wire gauge 2.5 mm2 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. of contacts see page 4 Amphenol 55 C 146 M Bestellverfahren How to order Auswahl Choice Beispiel Bestell Nr. Example Part No. 1) C146 P16 001 G8 Rahmen Frames 2) Module C146 A03 001 E8 Modules 3) Kontakte VN01 036 0002 1C Contacts 4) 5) Tool TA 0000 + TA 0000 124 + TA 0010 146 004 Gehause C146 10G016 500 8 Werkzeug Housings 56 Amphenol C 146 M Technische Daten Ubersicht Characteristics Overview Weitere technische Informationen, siehe folgende Seiten Further technical characteristics, see the following pages Allgemeine Kennwerte General Characteristics Modul Module 1 2 3 4 5 6 7 8 9 Polzahl Number of contacts 20 10 10 1) 5 3 4+ / 5 3 3 5 Kontaktdruchmesser in mm Contact diameter in mm 1,0 1,6 1,6 3,6 2,5 3,6 Koax gestanzt gestanzt gedreht stamped stamped turned Crimpkontakt Crimp contact Anschlussart Termination technique Brennbarkeit Flammability 2) 2) Rated impulse withstand voltage Spannungsfestigkeit 3) Voltage proof 3) Bemessungsstrom Tu = 40 C Rated current Tamb = 40 C Isolationswiderstand Insulation resistance 2) 63 V 400 V 400 V 400 V 630 V 1000 V 250 V 1000 V 400 V 3 3 3 3 3 3 3 3 3 4,0 kV 6,0 kV 6,0 kV 6,0 kV 8,0 kV 8,0 kV 8,0 kV 6,0 kV II II II II II II II II II 1680 V 2110 V 2110 V 3510 V 4260 V 5700 V Current carrying capacity 3) M Pollution degree 2) Material group 2) (PA) Strombelastbarkeit 2,5 gedreht turned V-O Isolierstoffgruppe 2) (PA) 4) 3,6 gedreht turned crimpen / crimp Rated voltage 2) Verschmutzungsgrad 2) Bemessungs-Stospannung gedreht gestanzt gedreht turned stamped turned Electrical Characteristics Elektrische Kennwerte Bemessungsspannung 2,5 gedreht turned 5A 10 A 4) 10 A 20 A 50 A 5700 V 3510 V 16 A 50 A 20 A siehe Derating Kurven / see derating curves 3) 1012 Durchgangswiderstand 3) Contact resistance 3) Klimatische Kennwerte Climatical Characteristics Temperaturbereich Temperatur range Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft 5) Insertion and withdrawal forces 5) 6) IP-Schutzart Stifteinsatz IP-degree of protection pin insert Norm/Standard IEC 60529 ungesteckt/unmated IP00 gesteckt/mated IP20 6) IP-Schutzart Buchseneinsatz IP-degree of protection socket insert Norm/Standard IEC 60529 ungesteckt/unmated IP20 gesteckt/mated IP20 < 5 m -40 C - +125 C -40 C - 40 C / + 125 C +100 C 15 - 20 N (Rahmen / frame) Werkstoffe Materials Rahmen Frames PA 6.6 GF Module Modules PA 6.6 GF Farbe Rahmen Colour frames schwarz / black Farbe Module Colour modules schwarz / black / rotbraun / redbrown Kontakte Contacts Kontaktoberflache Contact plating Cu-Legierung / Cu-alloy Au Ag Au Ag 1) auch LWL Kontakte moglich 1,0 mm POF / also FO 1,0 mm contacts available nach IEC 60664-1 / according to IEC 60664-1 3) nach IEC 60512-2 / according to IEC 60512-2 4) nach IEC 60512-3 / according to IEC 60512-3 5) nach IEC 60512-7 / according to IEC 60512-7 6) Ausnahme Stifteinsatz IP 20 siehe Module / Exception pin insert IP 20 see modules 2) Amphenol 57 C 146 M Module Ubersicht Modules Overview 58 Sitftmodul / pin module Mazeichnung Drawing Buchsenmodul / socket module Bezeichnung - Abbildung Description - Figure Nr. No. Bestell Nr. / Part No. Stiftmodule / Pin module Buchsenmodule /Socket module 20 pol. fur gestanzte Kontakte 20 contacts for stamped contacts 1 C146 A20 001 G8 C146 B20 001 G8 10 pol. fur gestanzte Kontakte 10 contacts for stamped contacts 2 C146 D10 001 E8 C146 C10 001 G8 10 pol. fur gedrehte Kontakte 10 contacts for turned contacts 3 C146 A10 001 E8 C146 B10 001 E8 5 pol. fur gedrehte Kontakte 5 contacts for turned contacts 4 C146 A05 001 E8 1) C146 B05 001 E8 1) 3 pol. fur gedrehte Kontakte 3 contacts for turned contacts 5 C146 A03 001 E8 C146 B03 001 E8 5 pol. fur gestanzte Kontakte 5 contacts for stamped contacts 6 C146 D04 001 E8 (4 pol) C146 C04 001 E8 (4 pol) C146 D05 001 E8 (4 + PE) C146 C05 001 E8 (4 + PE) C146 D05 801 E8 (5 pol) C146 C05 801 E8 (5 pol) 3 pol. fur Koax Kontakte 3 contacts for coax contacts 7 C146 A03 501 E8 C146 B03 501 E8 3 pol. fur gedrehte Kontakte 3 contacts for turned contacts 8 C146 A03 801 E8 C146 B03 801 E8 Amphenol C 146 M Rahmen Frames Bezeichnung - Abbildung Description - Figure Gehause, siehe Seite 126-153 Housings, see page 126-153 Rahmen fur Stiftmodule 1) Frame for pin modules 1) Rahmen fur Buchsenmodule 1) Frame for socket modules 1) Bestell Nr. / Part No. 2) Mazeichnung / Drawing Stiftmodule / pin module Buchsenmodule/socket modul RJ Modul RJ module C146 E12 001 E8 C146 F12 001 G8 Pneu Modul, 1 oder 2 Verbindungen Pneumatic module, 1 or 2 connections C146 G01 014 G8 (2,5 mm) C146 H01 034 G8 (2,5 mm) C146 G01 024 G8 (4,0 mm) C146 H01 044 G8 (4,0 mm) C146 G02 014 G8 (2,5 mm) C146 H02 034 G8 (2,5 mm) C146 G02 024 G8 (4,0 mm) C146 H02 044 G8 (4,0 mm) Rahmen fur 2 Module Frame for 2 modules Rahmen fur 3 Module Frame for 3 modules Rahmen fur 5 Module Frame for 5 modules Rahmen fur 7 Module Frame for 7 modules Mazeichnung / Drawing Rahmen fur Stiftmodule Rahmen fur Buchsenmodule Frame for pin modules Frame for socket module Bestell Nr. / Part No. 2) Kennzeich. Positions Bezeichnung - Abbildung Description - Figure Rahmen fur Stiftmodule Frame for pin modules A-B C146 P06 001 G8 C146 S06 001 G8 C146 P06 002 G8 (2 x PE) C146 S06 002 G8 (2 x PE) C146 P10 001 G8 C146 S10 001 G8 C146 P10 002 G8 (2 x PE) C146 S10 002 G8 (2 x PE) C146 P16 001 G8 C146 S16 001 G8 C146 P16 002 G8 (2 x PE) C146 S16 002 G8 (2 x PE) A-G C146 P24 001 G8 C146 P24 002 G8 (2 x PE) C146 S24 001 G8 C146 S24 002 G8 (2 x PE) T-Z C146 P24 101 G8 C146 P24 102 G8 (2 x PE) C146 S24 101 G8 C146 S24 102 G8 (2 x PE) A-C A-E Rahmen Buchsenmodule Frame for socket module 1) Im Rahmen fur Stiftmodule konnen auch Buchsenmodule gesteckt werden (inverse Bestuckung moglich). It is possible to mount socket modules in frames for pin modules (possibility of inverse configuration). 2) Fur den Einbau der Steckverbinder in nicht leitende Gehause sind beide Schutzleiter (Ausfuhrung 2 x PE) anzuschlieen. 2) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted. 1) Amphenol 59 M C 146 M 20 pol Technische Daten Characteristics 1) Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts 20 Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,09 - 0,5 mm2 (AWG 28 - 20) Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 63 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II (PA) Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 4,0 KV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 1,68 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 2) Luftstrecke Clearance IEC 60664-1 > 2,4 mm Kriechstrecke Creepage IEC 60664-1 > 2,4 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft 1) Insertion and withdrawal forces 1) IEC 60512-7; Test 13 b 10 - 15 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Kontakteinsatz Insert PA 6.6 GF Farbe Colour schwarz / black Kontakte Stift / Buchse Contacts male / female CuZn (Messing/brass) / CuSn (Bronze/bronce) Kontaktoberflache Contact plating Au (gold / gold) fur ein Modul / for one module 2) bei Beanspruchung >10 10 / under operating condition >10 10 Derating Kurven / Derating curves 0,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 60 Kurve Curve Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 0,25 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Polzahl Contacts Rahmen Frame a 20 2 Module b 40 2 Module c 60 3 Module d 100 5 Module e 140 7 Module Amphenol Bandkontakte fur Crimpzangen Contacts on reel for hand crimping tools C 146 M 20 pol Bandkontakte fur Crimpmaschinen Contacts on reel for crimp machines 350 Stuck 2000 Stuck (Zufuhrung links) 350 pcs Module Modules Abbildung Figure 2000 pcs (feeding left hand side) fur gestanzte 1,0 mm Kontakte for stamped 1,0 mm contacts Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul /Socket module Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module C146 A20 001 G8 C146 B20 001 G8 M Crimpkontakte / Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr. / Part No. Stiftkontakt / Male contact Buchsenkontakt / Female contact vergoldet / gold plating Einzelkontakte fur Crimpzangen / single contacts for hand crimping tools 0,09 - 0,25 mm2 0,25 - 0,50 mm2 28 - 24 24 - 20 100 100 VN01 010 0130 (2) VN01 010 0131 (2) VN02 010 0130 (2) VN02 010 0131 (2) 500 500 ZN01 010 0130 (2) ZN01 010 0131 (2) ZN02 010 0130 (2) ZN02 010 0131 (2) 2000 2000 10.000 10.000 TN01 010 0130 (2) TN01 010 0131 (2) FN01 010 0130 (2) FN01 010 0131 (2) TN02 010 0130 (2) TN02 010 0131 (2) FN02 010 0130 (2) FN02 010 0131 (2) Bandkontakte fur Crimpzangen / Contacts on reel for hand crimping tools 0,09 - 0,25 mm2 28 - 24 24 - 20 0,25 - 0,50 mm2 Bandkontakte fur Crimpmaschinen/ Contacts on reel for crimp machines Kontaktzufuhrung links Contact feeding left hand side 0,09 - 0,25 mm2 0,25 - 0,50 mm2 0,09 - 0,25 mm2 0,25 - 0,50 mm2 28 - 24 24 - 20 28 - 24 24 - 20 Werkzeuge / Tools 1) Bezeichnung / Description fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - 17D 438 SP Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Service Crimpzange Service crimping tool 0,09 - 0,25 mm2 0,25 - 0,50 mm2 - - TA 0200 146 Bei kleinen Leiterquerschnitten wird der Einsatz von Fuhrungselementen empfohlen (siehe Seite 184) If small wire sizes are used, guide pins and guide sockets should be prefered to use (see page 184) 1) Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" Abisolierlangen siehe S. 198 Stripping length see p. 198 Amphenol 61 C 146 M 10 pol Technische Daten Characteristics 1) Module fur gestanzte Kontakte Modules for stamped contacts Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts 10 Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,14 - 2,5 mm2 (AWG 26 - 14) Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 400 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6,0 KV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2,11 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 2) Luftstrecke / Kriechstrecke Clearance / Creepage IEC 60664-1 > 4,3 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft 1) Insertion and withdrawal forces 1) IEC 60512-7; Test 13 b 20 - 25 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz / black Stiftkontakt Male contact CuZn (Messing/brass) Buchsenkontakt Female contact CuSn (Bronze/bronce) Kontaktoberflache Contact plating Ag (silber/silver) fur ein Modul / for one module 2) bei Beanspruchung >10 10 / under operating condition >10 10 Derating Kurven / Derating curves 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 62 Kurve Curve Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 0,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Polzahl Contacts Rahmen Frame a 10 2 Module b 20 2 Module c 30 3 Module d 50 5 Module e 70 7 Module Amphenol gestanzte Einzelkontakte Stamped single contacts C 146 M 10 pol Bandkontakte fur Crimpzangen Contacts on reel for hand crimping tools Bandkontakte fur Crimpmaschinen Contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Module Modules 2000 pcs (feeding left or right hand side) fur gestanzte 1,6 mm Kontakte for stamped 1,6 mm contacts Abbildung Figure Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul /Socket module Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module C146 D10 001 E8 C146 C10 001 G8 M Crimpkontakte / Crimp contacts fur Leiterquerschnitt for wire gauge Lieferform Supplied as AWG Stuckzahl Pieces Gestanzte Einzelkontakte / Stamped single contacts Standard Hochstrom High current 0,14 - 0,5 mm 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 100 100 100 100 100 VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) VN01 016 0003 (2) VN01 016 0002 (2) VN01 016 0005 (2) VN02 016 0003 (2) VN02 016 0002 (2) VN02 016 0005 (2) Gestanzte Bandkontakte fur Crimpzangen / Stamped Contacts on reel for hand crimp tools Standard Hochstrom High current 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 200 200 100 200 100 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) ZN02 016 0003 (1) ZN01 016 0003 (2) ZN02 016 0003 (2) ZN02 016 0002 (1) ZN01 016 0002 (2) ZN02 016 0002 (2) ZN02 016 0005 (1) ZN01 016 0005 (2) ZN02 016 0005 (2) ZN02 016 0015 (1) ZN02 016 0016 (1) Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines 0,14 - 0,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 0,5 - 1,5 mm2 Standard 1,5 - 2,5 mm2 Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 0,14 - 0,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Standard Hochstrom 0,5 - 1,5 mm2 High current 1,5 - 2,5 mm2 26 - 20 20 - 16 16 - 14 20 - 16 16 - 14 26 - 20 20 - 16 16 - 14 20 - 16 18 - 14 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 HN01 016 0003 (1) HN01 016 0002 (1) HN01 016 0005 (1) HN01 016 0015 (1) HN01 016 0016 (1) TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) HN02 016 0003 (1) HN02 016 0002 (1) HN02 016 0005 (1) HN02 016 0015 (1) HN02 016 0016 (1) TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) HN01 016 0003 (2) HN02 016 0003 (2) HN01 016 0002 (2) HN02 016 0002 (2) HN01 016 0005 (2) HN02 016 0005 (2) TN01 016 0003 (2) TN02 016 0003 (2) TN01 016 0002 (2) TN02 016 0002 (2) TN01 016 0005 (2) TN02 016 0005 (2) Werkzeuge / Tools 2) Bezeichnung / Description fur Leiterquerschnitt for wire gauge Losewerkzeug fur Kontakte / Module - Removal tool for contacts / modules 1) 2) Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Werkzeuge / Tools - - FG 0300 146 1 / FG 1000 146 Service Crimpzange Service crimping tool 0,14 - 0,5 mm2 0,5 - 1,5 mm2 - - TA 0100 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 TA 0001 146 000 1 TA 0002 146 000 1 TA 0007 146 000 3 TA 0000 202 TA 0000 163 TA 0000 141 TA 0000 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" Amphenol Abisolierlangen siehe S. 198 Stripping length see p. 198 63 C 146 M 10 pol Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 10 Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,14 - 2,5 mm2 (AWG 26 - 14) Brennbarkeit Flammability Norm / Standard Wert / Value Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 400 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II (PA) Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2,21 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 2) Luftstrecke Clearance IEC 60664-1 > 4,3 mm Kriechstrecke Creepage IEC 60664-1 > 4,3 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 100 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Insertion and withdrawal forces 1) IEC 60512-7; Test 13 b 25 - 30 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz / black Kontakte Contacts CuZn (Messing / brass) Kontaktoberflache Contact plating Ag (silber / silver) Steck- und Ziehkraft 1) fur gedrehte 1,6 mm Kontakte for turned 1,6 mm contacts 1) fur ein Modul / for one module 2) bei Beanspruchung >10 10 / under operating condition >10 10 Derating Kurven / Derating curves 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 64 Kurve Curve Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 0,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Polzahl Contacts Rahmen Frame a 10 2 Module b 20 2 Module c 30 3 Module d 50 5 Module e 70 7 Module Amphenol C 146 M 10 pol Module Modules fur gedrehte 1,6 mm Kontakte for turned 1,6 mm contacts Abbildung Figure LWL-Kontakte FO-contacts Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul / Socket module Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module C146 A10 001 E8 C146 B10 001 E8 M Crimpkontakte / Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Einzelkontakte Single contact 0,14 - 0,37mm 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating Gedrehte Crimpkontakte / Turned crimp contacts 2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact 26 - 22 20 20 - 16 16 - 15 14 100 100 100 100 100 VN01 016 0024 (1) C VN01 016 0025 (1) C VN01 016 0026 (1) C VN01 016 0027 (1) C VN01 016 0028 (1) C VN02 016 0024 (1) C VN02 016 0025 (1) C VN02 016 0026 (1) C VN02 016 0027 (1) C VN02 016 0028 (1) C Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 016 0024 (2) C VN01 016 0025 (2) C VN01 016 0026 (2) C VN01 016 0027 (2) C VN01 016 0028 (2) C VN02 016 0024 (2) C VN02 016 0025 (2) C VN02 016 0026 (2) C VN02 016 0027 (2) C VN02 016 0028 (2) C LWL Kontakte / FO contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr. 1) / Part No. 1) Stiftkontakt / Male contact Buchsenkontakt / Female contact 1,0 mm POF/FO - 10 VN01 016 0040 (8) X Crimpkontakte / Crimp contacts Einzelkontakt / Single contact VN02 016 0040 (8) X Werkzeuge / Tools 2) Bezeichnung / Description fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0300 146 1 Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 0,14 - 1,0 mm2 1,5 mm2 2,5 mm2 TA 0010 146 000 1 TA 0000 184 TA 0000 Crimpzange fur LWL Kontakte 3) Crimping tool for FO contacts 3) 1,0 mm POF/FO 1) Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" 3) incl. Abisolierwerkzeug, Kontaktaufnahme, Schleiflehre / incl. stripping tool, locator, abrasive adapter 2) Amphenol TB 0500 146 Abisolierlangen siehe S. 198 Stripping length see p. 198 65 C 146 M 5 pol Technische Daten Characteristics 1) Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts 5 Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,5 - 4,0 mm2 (AWG 20 - 12) Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 400 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 3,51 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 2 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 2) Luftstrecke Clearance IEC 60664-1 5,8 mm Kriechstrecke Creepage IEC 60664-1 5,8 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft 1) Insertion and withdrawal forces 1) IEC 60512-7; Test 13 b 25 - 30 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz Kontakte Contacts Cu-Legierung / Cu-alloy Kontaktoberflache Contact plating Ag (silber / silver) fur ein Modul / for one module 2) bei Beanspruchung >10 10 / under operating condition >10 10 Derating Kurven / Derating curves 4 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 66 Kurve Curve Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 2,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Polzahl Contacts Rahmen Frame a 5 2 Module b 10 2 Module c 15 3 Module d 25 5 Module e 35 7 Module Amphenol C 146 M 5 pol Module Modules Abbildung Figure fur gedrehte 2,5 mm Kontakte for turned 2,5 mm contacts Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul /Socket module Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module C146 A05 001 E8 C146 B05 001 E8 M Gedrehte Crimpkontakte / Turned crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces 20 18 16 14 12 100 100 100 100 100 Bestell Nr.1) Stiftkontakt Male contact Gedrehte Crimpkontakte / Turned crimp contacts Einzelkontakte Single contact 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 4,0 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating VN01 025 0029 (1) C VN01 025 0030 (1) C VN01 025 0031 (1) C VN01 025 0032 (1) C VN01 025 0033 (1) C Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN02 025 0029 (1)C VN02 025 0030 (1)C VN02 025 0031 (1)C VN02 025 0032 (1)C VN02 025 0033 (1)C VN01 025 0029 (2) C VN01 025 0030 (2) C VN01 025 0031 (2) C VN01 025 0032 (2) C VN01 025 0033 (2) C VN02 025 0029 (2) C VN02 025 0030 (2) C VN02 025 0031 (2) C VN02 025 0032 (2) C VN02 025 0033 (2) C Werkzeuge / Tools 2) Bezeichnung / Description 1) 2) fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0300 146 4 Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 0,5 - 2,5 mm2 4,0 mm2 TA 0010 146 000 2 TA 0010 146 000 3 TA 0000 144 TA 0000 124 TA 0000 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Weitere Informationen siehe Katalog Werkzeuge" / further information see catalogue Tools" Amphenol Abisolierlangen siehe S. 198 Stripping length see p. 198 67 C 146 M 3 pol Technische Daten Characteristics 1) Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts 3 Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 1,5 - 10 mm2 (AWG 16 - 8) Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 630 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II (PA) Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 8,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2 Test 4 a 4,26 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 1 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 2) Luftstrecke Clearance IEC 60664-1 > 12 mm Kriechstrecke Creepage IEC 60664-1 > 12 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft 1) Insertion and withdrawal forces 1) IEC 60512-7; Test 13 b 20 - 30 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz / black Kontakte Contacts Cu-Legierung / Cu-alloy Kontaktoberflache Contact plating Ag (silber / silver) fur ein Modul / for one module 2) bei Beanspruchung >10 10 / under operating condition >10 10 Derating Kurven / Derating curves 10 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 68 Kurve Curve Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 6 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Polzahl Contacts Rahmen Frame a 3 2 Module b 6 2 Module c 9 3 Module d 15 5 Module e 21 7 Module Amphenol C 146 M 3 pol Module Modules Abbildung Figure fur gedrehte 3,6 mm Kontakte for turned 3,6 mm contacts Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul /Socket module Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module C146 A03 001 E8 C146 B03 001 E8 M Gedrehte Crimpkontakte / Turned crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr. 1) / Part No. 1) Stiftkontakt / Male contact Buchsenkontakt / Female contact versilbert / silver plating Gedrehte Crimpkontakte / Turned crimp contacts Einzelkontakt Single contact 2 1,5 mm 2,5 mm2 4,0 mm2 6,0 mm2 10,0 mm2 16 14 12 10 8 100 100 100 100 100 VN01 036 0004 (1)C VN01 036 0005 (1)C VN01 036 0001 (1)C VN01 036 0002 (1)C 2) VN01 036 0003 (1)C 2) VN02 036 0004 (1)C VN02 036 0005 (1)C VN02 036 0001 (1)C VN02 036 0002 (1)C 2) VN02 036 0003 (1)C 2) Werkzeuge / Tools 3) Bezeichnung / Description fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0300 146 3 Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 1,5 - 2,5 mm2 4,0 mm2 6,0 mm2 TA 0010 146 000 5 TA 0010 146 000 4 TA 0010 146 000 4 TA 0000 144 TA 0000 124 TA 0000 124 TA 0000 4-Kerb Crimpzange 4) 4-indet crimping tool 4) 1,5 -10,0 mm2 - - TB 0200 146 Crimpzange fur Kabelschuhe Crimping tool for cable lugs 6,0 mm2 10,0 mm2 - TA 0000 180 TA 0000 Stuckzahl / Pieces Bestell Nr. / Part No. 20 20 N15 006 000 9Z N15 010 000 7Z Kabelschuhe fur Schutzleiteranschluss / Cable lugs for PE connection Kabelschuh cable lug 6,0 mm2 10,0 mm2 - 1) Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Bei den Leiterquerschnitten 6 + 10 mm2 sind Kabelschuhe fur den Schutzleiteranschluss zu verwenden / For wire gauges 6 + 10 mm2 cable lugs have to be used for PE connection 3) Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" 4) incl. Prufstiftset, Kontaktaufnahme / incl. calibration pin set, locator Abisolierlangen siehe S. 198 / Stripping length see p. 198 2) Amphenol 69 C 146 M 4 pol 4+ 5 pol Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 4+ Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 0,5 - 4,0 mm2 (AWG 20 - 12) Brennbarkeit Flammability Wert / Value Elektrische Kennwerte Electrical Characteristics Bemessungsspannung /5 UL 94 V-0 Rated voltage IEC 60664-1 1000 V 1) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 8,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 5,7 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 Luftstrecke Clearance IEC 60664-1 > 14 mm Kriechstrecke Creepage IEC 60664-1 > 14 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics IP-Schutzart IP-degree of protection IEC 60529 20 IEC 60512-7; Test 13 b 15 - 20 N IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Steck- und Ziehkraft 1) Norm / Standard 2) Insertion and withdrawal forces 2) Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz / black Kontakte Stift / Buchse Contacts male / female CuZn (Messing/brass) / CuSn (Bronze/bronce) Kontaktoberflache Contact plating Ag (silber / silver) 630 V bei Verwendung als Steckvorrichtung / 630 V if the modules are used as plug and socket device 2) fur ein Modul / for one module Derating Kurven / Derating curves Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 70 4 mm2 Strombelastbarkeit I (A) Current carrying capacity I (A) 2,5 mm2 Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve Curve Polzahl Rahmen Contacts Frame a 5 2 Module b 10 2 Module c 15 3 Module d 25 5 Module e 35 7 Module Amphenol gestanzte Einzelkontakte Stamped single contacts C 146 M 4 pol 4+ 5 pol Bandkontakte fur Crimpzangen Contacts on reel for hand crimping tools Bandkontakte fur Crimpmaschinen Contacts on reel for crimp machines 200 / 100 Stuck 2000 Stuck (Zufuhrung links oder rechts) 200 / 100 pcs Module Modules 2000 pcs (feeding left or right hand side) fur gestanzte 2,5 mm Kontakte for stamped 2,5 mm contacts 40,4 Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul /Socket module 42,9 Abbildung Figure 34 5,0 C146 C04 001 E8 (4 pol) C146 D05 001 E8 (4 +PE) C146 C05 001 E8 (4 + PE) C146 D05 801 E8 (5 pol) C146 C05 801 E8 (5 pol) M 11,4 11,4 2,4 34 5,0 2,4 C146 D04 001 E8 (4 pol) 11,4 3,4 6,8 11,4 3,4 6,8 Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module 34 34 PE Kontakt 2 mm voreilend PE contact 2 mm first-to-mate Crimpkontakte / Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr.1) Stiftkontakt Male contact Gestanzte Einzelkontakte / Stamped single contacts 2 0,5 - 1,5 mm 1,5 - 2,5 mm2 2,5 - 4,0 mm2 Part No.1) Buchsenkontakt Female contact Bestell Nr.1) Stiftkontakt Male contact versilbert / silver plating 20 - 16 100 16 - 14 100 100 12 Part No.1) Buchsenkontakt Female contact vergoldet / gold plating VN01 025 0001 (101) VN02 025 0001 (101) VN01 025 0001 (102) VN02 025 0001 (102) VN01 025 0010 (101) VN02 025 0010 (101) VN01 025 0010 (102) VN02 025 0010 (102) VN01 025 0043 (1) VN02 025 0043 (1) Bandkontakte fur Crimpzangen / Contacts on reel for hand crimping tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 200 16 - 14 100 ZN01 025 0001 (1) ZN02 025 0001 (1) ZN01 025 0001 (2) ZN02 025 0001 (2) ZN01 025 0010 (1) ZN02 025 0010 (1) ZN01 025 0010 (2) ZN02 025 0010 (2) Bandkontakte fur Crimpmaschinen/ Contacts on reel for crimp machines 0,5 - 1,5 mm2 Kontaktzufuhrung rechts Contact feeding right hand side 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Kontaktzufuhrung links Contact feeding left hand side 1,5 - 2,5 mm2 2,5 - 4 mm2 20 - 16 16 - 14 20 - 16 16 - 14 12 2000 2000 2000 2000 2000 HN01 025 0001 (1) HN01 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) TN01 025 0043 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) TN02 025 0043 (1) Werkzeuge / Tools 2) Bezeichnung / Description 1) 2) fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0200 146 1 Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 2,5 - 4,0 mm2 TA 0004 146 000 1 TA 0005 146 000 3 TA 0003 146 000 1 TA 0000 163 TA 0000 141 TA 0000 121 TA 0000 Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" Amphenol Abisolierlangen siehe S. 198 Stripping length see p. 198 71 C 146 M 3 pol Koax Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 3 Anschlusstechnik Termination technique crimpen, loten / crimp, solder Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung Wert / Value UL 94 V-0 Rated voltage IEC 60664-1 250 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group II Wellenwiderstand Impedance Spannungsfestigkeit Voltage proof Frequenzbereich Working frequency Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 6 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 6 Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Insertion and withdrawal forces 1) IEC 60512-7; Test 13 b 25 - 30 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour rotbraun / redbrown Kontaktoberflache Contact plating Au (gold / gold) Steck- und Ziehkraft 1) Norm / Standard 1) IEC 60664-1 50 IEC 60512-2; Test 4 a 0,75 kV 2 GHz fur ein Modul / for one module Stiftkontakt / Male contact Buchsenkontakt / Female contact Bestell Nr. Part No. B D E F G 17 DM 537 401 23,6 1,7 7,9 6,3 2 17 DM 537 421 23,6 1,7 7,9 6,3 2 17 DM 537 405 26,3 3,2 9,5 7,9 2 17 DM 537 425 26,3 3,2 9,5 7,9 2 Absetzmae / Stripping Dimensions 72 Amphenol C 146 M 3 pol Koax Module Modules Abbildung Figure fur Koax-Kontakte for coax-contacts Mazeichnung / Drawing Stiftmodul / Pin module Buchsenmodul /Socket module Bestell Nr. / Part No. Stiftmodul / Pin module Buchsenmodul /Socket module C146 A03 501 E8 C146 B03 501 E8 M Crimpkontakte 1) / Crimp contacts 1) Lieferform Supplied as fur Kabelgroe for cable size Stuckzahl Pieces Bestell Nr. / Part No. Stiftkontakt / Male contact Buchsenkontakt / Female contact RG 174, 179, 316 1 17 DM 537 401 17 DM 537 421 RG 58 1 17 DM 537 405 17 DM 537 425 Einzelkontakte / Single contacts Werkzeuge 2) / Tools 2) 1) 2) Bezeichnung / Description fur Kabelgroe for cable size 6-Kant-Ma in mm 6-hex-size in mm Bestell Nr. / Part No. Crimpbacken / Crimping dies Werkzeuge / Tools Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0300 146 3 Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts RG 58 5,4 (6,5) (1,7) TA 0000 401 TA 0000 RG 174, 179, 316 3,25 (4,5) (1,7) TA 0000 402 TA 0000 Weitere Kontakte auf Anfrage / Further contacts on request Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" Amphenol 73 C 146 M 3 pol Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 3 Anschlusstechnik Termination technique crimpen / crimp Anschlussquerschnitt Wire gauge 1,5 - 10 mm2 (AWG 16 - 8) Brennbarkeit Flammability Wert / Value Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 1000 V 1) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 8,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 5,7 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 1 m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 Luftstrecke Clearance IEC 60664-1 > 14 mm Kriechstrecke Creepage IEC 60664-1 > 14 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics IP-Schutzart IP-degree of protection IEC 60529 20 IEC 60512-7; Test 13 b 20 - 30 N IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles Steck- und Ziehkraft 1) Norm / Standard 2) Insertion and withdrawal forces 2) Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz / black Kontakte Contacts Cu-Legierung / Cu-alloy Kontaktoberflache Contact plating Ag (silber / silver) 630 V bei Verwendung als Steckvorrichtung / 630 V if the modules are used as plug and socket device 2) fur ein Modul / for one module Derating Kurven / Derating curves 10 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) 74 Kurve Curve Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) 6 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Polzahl Contacts Rahmen Frame a 3 2 Module b 6 2 Module c 9 3 Module d 15 5 Module e 21 7 Module Amphenol C 146 M 3 pol Module Modules Abbildung Figure fur gedrehte 3,6 mm Kontakte for turned 3,6 mm contacts alle Kontakte 2mm voreilend zu anderen Modulen all contacts 2mm first-to-mate to other modules Bestell Nr. / Part No. Mazeichnung / Drawing Buchsenmodul /Socket module Stiftmodul / Pin module Buchsenmodul /Socket module Stiftmodul / Pin module C146 A03 801 E8 C146 B03 801 E8 M Crimpkontakte / Crimp contacts Lieferform Supplied as fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr. 1) / Part No. 1) Stiftkontakt / Male contact Buchsenkontakt / Female contact 1,5 mm2 2,5 mm2 4,0 mm2 6,0 mm2 10,0 mm2 16 14 12 10 8 100 100 100 100 100 VN01 036 0004 (1)C VN01 036 0005 (1)C VN01 036 0001 (1)C VN01 036 0002 (1)C 2) VN01 036 0003 (1)C 2) Crimpkontakte / Crimp contacts Einzelkontakt Single contact VN02 036 0004 (1)C VN02 036 0005 (1)C VN02 036 0001 (1)C VN02 036 0002 (1)C 2) VN02 036 0003 (1)C 2) Werkzeuge / Tools 3) Bezeichnung / Description fur Leiterquerschnitt for wire gauge Bestell Nr. / Part No. Kontaktaufnahme / Contact locator Crimpbacken / Crimping dies Losewerkzeug fur Kontakte Removal tool for contacts - - - FG 0300 146 3 Losewerkzeug fur Module Removal tool for modules - - - FG 1000 146 Crimpzange fur Einzelkontakte Crimping tool for single contacts 1,5 - 2,5 mm2 4,0 mm2 6,0 mm2 TA 0010 146 000 2 TA 0010 146 000 4 TA 0010 146 000 4 TA 0000 144 TA 0000 124 TA 0000 124 TA 0000 4-Kerb Crimpzange 4) 4-indet crimping tool 4) 1,5 -10,0 mm2 - - TB 0200 146 Crimpzange fur Kabelschuhe Crimping tool for cable lugs 6,0 mm2 10,0 mm2 - TA 0000 180 TA 0000 Stuckzahl / Pieces Bestell Nr. / Part No. 20 20 N15 006 000 9Z N15 010 000 7Z Kabelschuhe fur Schutzleiteranschluss / Cable lugs for PE connection Kabelschuh cable lug 1) Werkzeuge / Tools 6,0 mm2 10,0 mm2 - Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 / Explanation of the Part No. for contacts see page 4 Bei den Leiterquerschnitten 6 + 10 mm2 sind Kabelschuhe fur den Schutzleiteranschluss zu verwenden / For wire gauges 6 + 10 mm2 cable lugs have to be used for PE connection 3) Weitere Informationen siehe Katalog Werkzeuge" / Further information see catalogue Tools" 4) incl. Prufstiftset, Kontaktaufnahme / incl. calibration pin set, locator Amphenol 75 2) C 146 M RJ Modul RJ module Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Wert / Value Module Wert / Value RJ45 Number of contacts 4 8 Anschlusstechnik Termination technique Crimpen Stecken Anschlussquerschnitt Wire gauge 0,14 - 2,5mm2 Brennbarkeit Flammability Elektrische Kennwerte Technical Characteristics Bemessungsspannung Rated voltage Bemessungs-Stospannung Rated impulse withstand voltage Norm / Standard UL 94 V-0 V-0 IEC 60664-1 400 V AC 125 V AC IEC 60664-1 6 kV 1,8 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 3,51 kV 1,0 kV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b 13 A1) 1,5 A Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5 m 20 m IEC 60512-2; Test 3 a 10 10 5 8 Isolationswiderstand Insulation resistance Klimatische Kennwerte Climatical Characteristics Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h + 80 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 20 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft Insertion and withdrawal forces IEC 60512-7; Test 13 b 15-20 N max. 20 N Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a Werkstoffe Materials Kontakteinsatz Insert PA 6.6 GF Farbe Colour schwarz / black schwarz / black Kontakte Stift / Buchse Contacts male / female CuZn CuSn Kontaktoberflache Contacts plating Ag (silber / silver) Au (Gold / gold) 500 Steckzyklen mating cycles 500 Steckzyklen mating cycles 1) 2 Module, 40C Umgebungstemperatur, 1,5 mm2 Anschlussquerschnitt / 2 Modules, 40C ambient temperature, 1,5 mm2 wire gauge RJ Modul RJ Module Zur Integration von Standard RJ45 Komponenten * Weltweiter Echtzeit-Zugriff auf Maschinen und Anlagen For integration of standard RJ45 components * Sehr leichte Konfektionierung durch Einsatz von Standard RJ45 Komponenten * Worldwide real-time access on machines and facilities * Ein Steckverbinder fur Power, Signale und Datenubertragung * One connector for power, signal and data transmission * Zusatzlich 4 Power Crimp-Kontakte * 4 additional power crimp contacts * Zeit- und Kosteneinsparungen durch einheitliche Aktiv- und Passivkomponenten * Time- and money saving through the use of similar active- and passive components * Einheitliches Ubertragungsprotokoll im Office- und Produktionsbereich * Unitary transmission protocol in the office- and production environment. * erreicht CAT 5 fur Ethernet nach ISO/IEC 11801 * Meets CAT 5 for Ethernet acc. ISO/IEC 11801 Rahmen fur die Integration des RJ45 Moduls sowie Gehause fur den Einbau der Rahmen entnehmen Sie bitte dem Gesamtkatalog C146 Schwere Steckverbinder Frames for the integration of the RJ45 module as well as housings for the incorporation of the frames can be found in the full range C146 heavy connectors catalogue 76 * Easy assembly through the use of standard RJ45 components Amphenol C 146 M RJ Modul RJ module Module Modules Abbildung Figure Mazeichnung Drawing Bestell Nr. Part No. C146 E12 001 E8 Stiftmodul / Pin module M C146 F12 001 G8 * Buchsenmodul /Socket module Tullengehause, 2x Abgang oben /Hood, 2x top entry 10 pol 2xM25 ohne Stutzen / without stud 16 pol 2xM25 ohne Stutzen / without stud 24 pol 1xM25 + 1xM40 ohne Stutzen / without stud Kabelverschraubung, geteilt (Verpackungseinheit 5 St.) Gland bushing, splitted (packing unit 5 pcs.) * C146 21R010 902 8 C146 21R016 910 8 C146 21R024 913 8 VN16 250 0131 V Wenn Buchse eingefedert: 46,8 / If plug socket receded: 46,8 Amphenol 77 C 146 M Pneu Modul Pneumatic module Technische Daten Characteristics 1) 1) Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Kontaktzahl Number of contacts 1/2 Anschlusstechnik Termination technique Schlauchanschluss / tube termination Anschlussquerschnitt Wire gauge 2,5 mm / 4,0 mm Brennbarkeit Flammability Technische Kennwerte Technical Characteristics Betriebsdruck Operating pressure 8 bar mit PTFE-Schlauch (Teflon) / with PTFE tube Schaltweg Operating path 4,0 mm Absperrung Locking einseitig absperrend / locking on one side Pneumatikschlauch Pneumatic tube nur PTFE-Schlauche verwenden 1) only use PTFE tubes 1) Klimatische Kennwerte Climatical Characteristics Obere Grenztemperatur Upper temperature +100 C Untere Grenztemperatur Lower temperature - 20 C Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Modul Module PA 6.6 GF Farbe Colour schwarz / black Kontakte Contacts Messing MS 58 / Brass MS 58 V-0 UL 94 5000 Steckzyklen / mating cycles Die Module sind speziell fur den Einsatz von PTFE-Schlauchen konzipiert und durfen nur in Verbindung mir diesen eingesetzt werden. Der Einsatz von Schlauchen aus anderem Material ist nicht zu empfehlen, da die oberen und unteren Grenztemperaturen nicht erreicht werden. The modules are specifically designed for the use of PTFE tubes and should only be used in conjunction with these. The use of tubes made from other materials is not recommended, as the higher and lower category temperatures will not be achievable. Pneu Modul Pneumatic Module Leistung, Signal und Pneumatik in einem Steckverbinder Power, signal and pneumatic within a single connector * Sehr stabile Messing-Kontakte * Very stable brass contacts * Pneumatik-Buchsenkontakte mit Absperrung, schliet bei geoffnetem Steckverbinder * Pneumatic socket contacts with barrier, closes when the connector is open * Wahlweise mit 1 oder 2 Anschlussen * Available with single or double connections * Anschluss fur 2,5 mm oder 4 mm PTFE (Teflon)-Schlauchen * Connection for 2.5 mm or 4 mm PTFE (Teflon)-tubes * Schlauche konnen von den Anschlussen wieder demontiert werden * Tubes can be disassembled from the terminations Rahmen fur die Integration des Pneu Moduls sowie Gehause fur den Einbau der Rahmen entnehmen Sie bitte dem Gesamtkatalog C146 Schwere Steckverbinder. Frames for the integration of the pneumatic module as well as housings for the incorporation of the frames can be found in the full range C146 heavy connectors catalogue. 78 Amphenol C 146 M Pneu Modul Pneumatic module Module Modules Abbildung Figure Bestell Nr. / Part No. Mazeichnung / Drawing Buchsenmodul /Socket module Stiftmodul / Pin module Buchsenmodul /Socket module Stiftmodul / Pin module C146 G01 014 G8 (2,5 mm) C146 H01 034 G8 (2,5 mm) C146 G01 024 G8 (4,0 mm) C146 H01 044 G8 (4,0 mm) M A Amphenol C146 G02 014 G8 (2,5 mm) C146 H02 034 G8 (2,5 mm) C146 G02 024 G8 (4,0 mm) C146 H02 044 G8 (4,0 mm) 79 C 146 M Losewerkzeuge, Zubehor Removal tools, accesoires Kontaktgroe Contact size 80 Abbildung Figure Bestell Nr. Part No. 1,0 mm 17D 438 SP 1,6 mm FG 0300 146 1 2,5 mm gedreht 2,5 mm turned FG 0300 146 4 2,5 mm gestanzt 2,5 mm stamped FG 0200 146 1 3,6 mm FG 0300 146 3 Modullosewerkzeug Removal tool for modules FG 1000 146 Blind Module Blank modules C146 A00 001 E8 (Stift/pin) C146 B00 001 E8 (Buchse/socket) Modulkoppler Module coupler C146 10Z000 002 8 Montagewinkel Assembly angle C146 10Z001 001 8 Zugentlastung Strain relief C146 10Z002 001 8 Amphenol C 146 A A Hauptmerkmale Main characteristics * Schmale Bauform * Bemessungsspannung 250 / 400 V * Bemessungsstrom 14 A ... 18 A * Anschlussart: schrauben * Polzahl: 3, 4, 10, 16, 32 * Narrow style * Rated voltage 250 / 400 V * Rated current 14 A ... 18 A * Termination: screw * Number of contacts: 3, 4, 10, 16, 32 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics SEV 250 V, 10 A UL 600 V, 14 A E 63093 CSA 600 V, 10 A; 16 A; 20 A LR 700721 Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol Zulassungs-Nummer / Approval-No. In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 81 C 146 A Kurzinformation Brief information Allgemeine Hinweise * Steckverbinder der Serie C 146 A durfen unter Spannung, jedoch nicht unter Strom betatigt werden. Werden die Steckverbinder als Steckvorrichtung eingesetzt, ist der Strom auf 10 % des Bemessungsstroms zu begrenzen. * Fur die Einsatze der Serie C 146 A (10 + 16 pol) konnen sowohl niedrige, wie auch hohe Gehausebauformen verwendet werden. General information * For series C 146 A connectors may be engaged or disengaged when live but without electrical load. If these connectors are used as plug and socket device, the load shall be reduced to 10 % of the rated current. * Low and high profile housing for C 146 A series inserts for 10 and 16 contacts. Nicht genormte Steckverbinder, aber: * Steck- und austauschbar mit Fremdfabrikaten a) Kontakteinsatz / Kontakteinsatz b) Kontakteinsatz / Gehause 10, 16 pol. Gehause nach CECC 75 301 - 801 No standard for this series, but: * Interchangeable with other makes a) contact insert to contact insert b) contact insert to housing 10 ,16 pin Housings are designed according to CECC 75 301 - 801 Voreilender Schutzkontakt First-to-mate last-to-break protective ground contact Groe Gehauseauswahl in 2 Bauhohen (ab Seite 108) Large range of housings in 2 different heights (see page 108) 82 Amphenol C 146 A Technische Daten Characteristics 1) 2) Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts 3/4 + Anschlusstechnik Termination technique schrauben / screw Anschlussquerschnitt Wire gauge 0,25 - 2,5 mm2 Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung 10 + 16 + 32 + UL 94 V-0 Rated voltage IEC 60664-1 400 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 III b Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 4,0 KV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2,8 KV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Bemessungsstrom Tu = 40 C Rated current Tamp = 40 C Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 1) Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 100 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Steck- und Ziehkraft Insertion and withdrawal forces IEC 60512-7; Test 13 b 15 - 20 N 50 - 70 N 80-100 N 160-200 N 2) IP-Schutzart Stifteinsatz IP-degree of protection pin insert IEC 60529 2) IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 18 A 250 V 16 A 14 A ungesteckt/unmated IP00 ungesteckt/unmated IP20 14 A gesteckt/mated IP20 gesteckt/mated IP20 Gewicht Stifteinsatz Weight pin insert 13 g 48 g 68 g 136 g Gewicht Buchseneinsatz Weight socket insert 13 g 52 g 73 g 146 g Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Kontakteinsatz Insert PA Kontakte Contacts Cu Zn (Messing / brass) Kontaktoberflache Contact plating Ag (silber / silver) IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles PBT PBT PBT Bei Beanspruchung > 1010 / Under operating conditions > 1010 IP-Schutzart im Anschlussbereich der Schraubausfuhrung IP 10 / IP-degree of protection on termination side of screw version IP 10 Amphenol 83 A C 146 A 400 V~ 10 A 3/4 + Gehause siehe Seite 110-113 Housings see page 110-113 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss 3+ Contact insert screw termination 3+ Stifteinsatz Male insert C146 10A003 002 4 C146 10B003 002 4 C146 10A004 002 4 C146 10B004 002 4 Buchseneinsatz Female insert Kontakteinsatz Schraubanschluss 4+ Contact insert screw termination 4+ Stifteinsatz Male insert Buchseneinsatz Female insert Steckbild / pin layout 3+ 4+ Stifteinsatz Male insert Buchseneinsatz Female insert Stifteinsatz Male insert Buchseneinsatz Female insert Derating Kurven / Derating curves 1,5 mm2 1,5 mm 2 2 2,52,5mm mm 2 Belastungsstrom (A) Belastungsstrom [A] . Current carrying capacity I (A) Belastungsstrom (A) Belastungsstrom [A] .capacity I (A) Current carrying 25 25 20 20 15 15 10 10 55 35 35 30 30 25 25 20 20 15 15 10 10 55 00 0 0 84 20 20 40 40 60 80 60 80 Umgebungstemperatur [ C] Umgebungstemperatur(C) Temperature (C) 100 100 120 120 140 140 00 0 0 20 20 40 40 6060 8080 Umgebungstemperatur [ C] Umgebungstemperatur(C) Temperature (C) 100 100 120 120 140 140 Amphenol C 146 A 250 V~ 16 A 10 + Gehause siehe Seite 114-117 Housings see page 114-117 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert Kontakteinsatz Schraubanschluss Contact insert screw termination C146 10A010 002 4 C146 10B010 002 4 C146 10A010 102 4 (mit Drahtschutz / with wire protection) C146 10B010 102 4 (mit Drahtschutz / with wire protection) Buchseneinsatz Female insert A Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves 1,5 mm 2 1,5 mm2 Belastungsstrom (A) Belastungsstrom [A] . Current carrying capacity I (A) Belastungsstrom Belastungsstrom [A] . (A) Current carrying capacity I (A) 20 20 15 15 10 10 55 00 2 mm 2,52,5mm 2 25 25 3535 3030 2525 2020 1515 1010 55 00 Amphenol 20 20 40 40 6060 8080 Umgebungstemperatur [ C] Umgebungstemperatur(C) Temperature (C) 100 100 120 120 140140 00 00 20 20 40 40 60 80 60 80 Umgebungstemperatur [ C] Umgebungstemperatur(C) Temperature (C) 100 100 120 120 140 140 85 C 146 A 250 V~ 14 A 16 + Gehause siehe Seite 118-121 Housings see page 118-121 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss Contact insert screw termination Stifteinsatz Male insert C146 10A016 002 4 C146 10B016 002 4 C146 10A016 102 4 (mit Drahtschutz / with wire protection) C146 10B016 102 4 (mit Drahtschutz / with wire protection) Buchseneinsatz Female insert Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Derating Kurven / Derating curves 1,5 mm 2 1,5 mm2 Belastungsstrom (A) Belastungsstrom [A] . Current carrying capacity I (A) Belastungsstrom Belastungsstrom [A] . (A) Current carrying capacity I (A) 20 20 15 15 10 10 55 00 0 35 35 30 30 25 25 20 20 15 15 10 10 55 0 86 2 2,5 2,5mm mm 2 25 25 20 20 4040 6060 8080 Umgebungstemperatur [ C] Umgebungstemperatur(C) Temperature (C) 100 100 120 120 140 140 00 00 20 20 40 40 60 80 60 80 Umgebungstemperatur [ C] Umgebungstemperatur(C) Temperature (C) 100 100 120 120 140 140 Amphenol C 146 A 250 V~ 14 A 32 + Steckverbinder Connectors Gehause siehe Seite 122-125 Housings see page 122-125 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss Contact insert screw termination Stifteinsatz Male insert C146 10A016 002 4 (1 - 16) C146 10B016 002 4 (1 - 16) + + C146 10A016 004 4 (17 - 32) C146 10B016 004 4 (17 - 32) C146 10A016 102 4 (1 - 16) + C146 10B016 102 4 (1 - 16) + C146 10A016 104 4 (17 - 32) (mit Drahtschutz / with wire protection) C146 10B016 104 4 (17 - 32) (mit Drahtschutz / with wire protection) Buchseneinsatz Female insert A Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Amphenol Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) 87 88 Amphenol C 146 HSE HSE Hauptmerkmale Main characteristics * Bemessungsspannung 400 V * Bemessungsstrom 42 A * Anschlussart: schrauben * Anschlussquerschnitt: 6mm2 * Polzahl: 6 * Rated voltage 400 V * Rated current 42 A * Termination: screw * Max. wire gauge 6 mm2 * Number of contacts: 6 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics Zulassungs-Nummer / Approval-No. UL 600 V, 35 A 48932 CSA 600 V, 35 A E 63093 Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 89 C 146 HSE Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Norm / Standard Wert / Value Polzahl Number of contacts 6+ Anschlusstechnik Termination technique schrauben / screw Anschlussquerschnitt Wire gauge 0,5 - 6,0 mm2 (O 3,4 mm) Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung UL 94 V-0 Rated voltage IEC 60664-1 400 V (600 V UL / CSA2) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 II Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 6,0 KV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 2200 V Strombelastbarkeit Rated current IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Bemessungsstrom Tu = 40 C Rated current Tamp = 40 C Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 1m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 1) Luftstrecke Clearance IEC 60664-1 3,5 mm Kriechstrecke Creepage IEC 60664-1 5,6 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics 40 - 60 N 42 A Steck- und Ziehkraft Insertion and withdrawal forces IEC 60512-7; Test 13 b 3) IP-Schutzart Stifteinsatz IP-degree of protection pin insert IEC 60529 3) IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 ungesteckt/unmated IP00 ungesteckt/unmated IP20 Gewicht Stifteinsatz Weight pin insert Gewicht Buchseneinsatz Weight socket insert Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Kontakteinsatz Insert PA, GV Kontakte Contacts Cu Zn (Messing / brass) Kontaktoberflache Contact plating Ag (silber / silver) Farbe Colour schwarz / black gesteckt/mated IP20 gesteckt/mated IP20 80 g 80 g IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles 1) Bei Beanspruchung > 1010 / Under operating conditions > 1010 Hinweisschild fur CSA-Anwendung siehe Seite 176/ Label for CSA application see page 176 3) IP-Schutzart im Anschlussbereich IP 10 / IP-degree of protection on termination side IP 10 2) 90 Amphenol C 146 HSE 400 V~ 42 A 6+ Gehause siehe Seite 138-145 Housings see page 138-145 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Kontakteinsatz Schraubanschluss Contact insert screw termination Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Stifteinsatz Male insert C146 10A006 102 5 (mit Drahtschutz / with wire protection) C146 10B006 102 5 (mit Drahtschutz / with wire protection) Buchseneinsatz Female insert Montageanleitung Steckbild / Assembly instruction pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) HSE Strombelastbarkeit I (A) Current carrying capacity I (A) Derating Kurven / Derating curves Anschlussquerschnitt 6 mm2 Wire gauge 6 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Amphenol 91 92 Amphenol C 146 HvE HvE Hauptmerkmale Main characteristics * Bemessungsspannung 660 V * Bemessungsstrom 16 A ... 22 A * Anschlussart: schrauben * 2 nacheilende Schaltkontakte * Polzahl: 3, 6, 10, 16, 20, 26, 32 * Rated voltage 660 V * Rated current 16 A ... 22 A * Termination: screw * 2 delayed mating contacts * Number of contacts: 3, 6, 10, 16, 20, 26, 32 Zulassungen / Approvals Prufstelle / Testhouse Kennwerte / Characteristics Zulassungs-Nummer / Approval-No. SEV 660 V, 16 / 22 A UL 600 V, 10 A E 63093 CSA 600 V, 20 A 48932 Zulassungen beziehen sich im allgemeinen auf reprasentative Ausfuhrungen der Steckverbinderserie. Prufumfang und Prufvorschrift auf Anfrage. Amphenol In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request. 93 C 146 HvE Kurzinformation Brief information Konstruktiver Aufbau der HvE-Steckverbindung Die Steckverbindung der Serie C 146 HvE sind wie folgt aus der Baureihe C 146 E abgeleitet: Construction of connectors Type HvE The connectors of series C 146 HvE are based on series C 146 E with the following deviations: Kontakteinsatze Die 3, 6 und 10-pol. HVE-Kontakteinsatze gehen aus den 10, 16 und 24-pol. Isolierkorpern der Baureihe C 146 E durch Teilbestuckung und 2 zusatzlichen, nacheilenden Schaltkontakten hervor. Lediglich die Polzahl 16 HVE besitzt in der Steckgeometrie abweichende Kontakttrager. Ihre aueren Abmessungen sind jedoch mit denen der Polzahl 24, Serie C 146 E identisch. Die nacheilenden Schaltkontakte ermoglichen den Anschluss einer Schutzwicklung zum Zweck der elektrischen Verriegelung. Das bedeutet spannungslose Buchseneinsatze im ungesteckten Zustand. Werden Steckverbinder ohne Schaltleistung als Steckverbinder mit Schaltleistung eingesetzt, so mussen die elektrischen Leistungsdaten gema den Angaben des Herstellers reduziert werden. Diese Angaben sind beim Hersteller zu erfragen. C 146 E-Stifteinsatze (400 V) und C 146 HvE-Buchseneinsatze sind nicht miteinander steckbar, da a) bei den 3, 6 und 10-pol. Buchseneinsatzen 2 nicht belegte Kontaktkammern verschlossen sind. (Blindstopfen). b) die 16-pol. HVE-Kontakttrager eine abweichende Steckgeometrie besitzen. Inserts The HVE-inserts with 3, 6 and 10 contacts are basically the same as the 10, 16 and 24-contacts inserts of series C 146 E. However they are only partly loaded with contacts and have two delayed mating pilot duty contacts. Only type 16 HVE has special inserts with a different contact arrangement. The mounting dimensions are however identical with the 24 contacts version of C 146 E. The delayed mating contacts are intended for switching a relay coil for electrically locking in order to have unloaded socket contacts in an unmated condition. If connectors without breaking capacity are used as connectors with breaking capacity the electrical power data must be reduced in accordance with the manufacturer's specification. These specifications are available from the manufacturer. C 146 E inserts with pin contacts are not intermatable with C 146 HvE inserts with socket contacts due to a) two empty contact holes are closed at 3, 6 and 10 contact inserts. b) the 16 contacts HVE insert has a different contact arrangement. Gehause: (aus Alu-Druckguss) Verwendet werden beim 16-pol. HvE-Kontakteinsatz C 146 E-Gehause mit Isolationsauskleidung. (Isolationsfolie an Innenwand). Die Sperrstege an den Gehauseinnenwanden (Schmalseite), die das Einsetzen der 660 V-Kontakttrager in 400 V-Gehausen verhindern, sind entfernt. Der 16-pol. HvE-Einsatz mit stirnseitigem Sperrstuck ist jetzt montierbar. Housings: (made of aluminium) C 146 E housings with an inside insulation (plastic foil) are used for the 16-contacts insert. The inside barriers at the narrow sides preventing mounting of 660 V-inserts in 400 V housings are removed and the 16-contacts insert is now mountable. Nicht genormte Steckverbinder, aber: Steck- und austauschbar mit Fremdfabrikaten a) Kontakteinsatz/Kontakteinsatz b) Kontakteinsatz/Gehause 6, 10, 16, 24 pol. No standard for this series, but: Intermateable and exchangeable with other makes a) Contact insert to contact insert b) Contact insert to housing 6, 10 ,16, 24 pin Gehause nach DIN 43620 (CECC 75 301-801, EN 175 301-801) Housings are designed according to DIN 43620 (CECC 75 301-801, EN 175 301-801) Voreilender Schutzkontakt First-to-mate last-to-break protective ground contact 94 Amphenol C 146 HvE Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts Anschlusstechnik Termination technique schrauben / screw Anschlussquerschnitt Wire gauge 0,25 - 2,5 mm2 Brennbarkeit Flammability Elektrische Kennwerte Electrical Characteristics Bemessungsspannung Norm / Standard Wert / Value 3 6 10 16 20 264) 32 IIIa 4) II UL 94 V-0 Rated voltage IEC 60664-1 660 V 1) (600 V UL / CSA3) Verschmutzungsgrad Pollution degree IEC 60664-1 3 Uberspannungskategorie Installation (overvoltage) category IEC 60664-1 III Isolierstoffgruppe Material group IEC 60664-1 Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 8,0 KV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 3,5 KV Strombelastbarkeit Current carrying capacity IEC 60512-3; Test 5 b siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2; Test 2 a 5m Isolationswiderstand Insulation resistance IEC 60512-2; Test 3 a 10 12 2) Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 125 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics 5) IP-Schutzart Stifteinsatz IP-degree of protection pin insert 5) IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 IEC 60529 II III a ungesteckt/unmated IP00 ungesteckt/unmated IP20 gesteckt/mated IP20 gesteckt/mated IP20 HvE Gewicht Stifteinsatz Weight pin insert 49 g 63 g 81 g 107 g 162 g 189 g 214 g Gewicht Buchseneinsatz Weight socket insert 49 g 63 g 81 g 107 g 162 g 189 g 214 g Mechanische Lebensdauer Mechanical operation Werkstoffe Materials Kontakteinsatz Insert Kontakte Contacts Cu Zn (Messing / brass) Kontaktoberflache Contact plating Ag (silber / silver) Farbe Colour IEC 60512-5; Test 9 a 500 Steckzyklen / mating cycles PC, GV grau / grey PA,GV PC,GV schwarz grau black grey 4) PA,GV 4) schwarz black 1) fur Arbeitskontakte, 400 V fur Schaltkontakte / for working contacts, 400 V for mating contacts bei Beanspruchung > 1010 / Under operating conditions > 1010 3) Hinweisschild fur CSA-Anwendung siehe Seite 186 / Label for CSA application see page 186 4) Kombination 10- und 16-polig; d.h. Werkstoff PC und PA / Combination 10 and 16 ways, i.e. material PC and PA 5) IP-Schutzart im Anschlussbereich IP 10 / IP-degree of protection on termination side IP 10 2) Amphenol 95 C 146 HvE 3+ 660 V~ +2 16 / 22 A 2 nacheilende Schaltkontakte 2 delayed mating contacts Gehause siehe Seite 130-137 Housings see page 130-137 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss 1) Contact insert screw termination 1) Stifteinsatz Male insert C146 10A003 102 3 C146 10B003 102 3 Buchseneinsatz Female insert Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Arbeitskontakt / working contact Schaltkontakt / mating contact Leerstelle / without contact Derating Kurve / Derating curve Strombelastbarkeit I (A) Current carrying capacity I (A) Begrenzung durch Leiter beachten Notice restriction of wire Kurve a Anschlussquerschnitt 1,5 mm2 Curve a wire gauge 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b Anschlussquerschnitt 2,5 mm2 Curve b wire gauge 2,5 mm2 1) mit Drahtschutz / with wire protection 96 Amphenol C 146 HvE 6+ 660 V~ +2 16 / 22 A 2 nacheilende Schaltkontakte 2 delayed mating contacts Gehause siehe Seite 138-145 Housings see page 138-145 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss 1) Contact insert screw termination 1) Stifteinsatz Male insert C146 10A006 102 3 C146 10B006 102 3 Buchseneinsatz Female insert Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) HvE Arbeitskontakt / working contact Schaltkontakt / mating contact Leerstelle / without contact Derating Kurve / Derating curve Strombelastbarkeit I (A) Current carrying capacity I (A) Begrenzung durch Leiter beachten Notice restriction of wire Kurve a Anschlussquerschnitt 1,5 mm2 Curve a wire gauge 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b Anschlussquerschnitt 2,5 mm2 Curve b wire gauge 2,5 mm2 1) mit Drahtschutz / with wire protection Amphenol 97 C 146 HvE 10 + 660 V~ +2 16 / 22 A 2 nacheilende Schaltkontakte 2 delayed mating contacts Gehause siehe Seite 146-153 Housings see page 146-153 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss 1) Contact insert screw termination 1) Stifteinsatz Male insert C146 10A010 102 3 C146 10B010 102 3 Buchseneinsatz Female insert Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) Arbeitskontakt / working contact Schaltkontakt / mating contact Leerstelle / without contact Derating Kurve / Derating curve Strombelastbarkeit I (A) Current carrying capacity I (A) Begrenzung durch Leiter beachten Notice restriction of wire Kurve a Anschlussquerschnitt 1,5 mm2 Curve a wire gauge 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b Anschlussquerschnitt 2,5 mm2 Curve b wire gauge 2,5 mm2 1) mit Drahtschutz / with wire protection 98 Amphenol C 146 HvE 16 + 660 V~ +2 16 / 22 A 2 nacheilende Schaltkontakte 2 delayed mating contacts Gehause siehe Seite 154-155 Housings see page 154-155 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Schraubanschluss 1) Contact insert screw termination 1) Stifteinsatz Male insert C146 10A016 102 3 C146 10B016 102 3 C146 10A016 002 3 (ohne Drahtschutz without wire protection) C146 10B016 002 3 (ohne Drahtschutz without wire protection) Buchseneinsatz Female insert Montageanleitung, Steckbild / Assembly instruction, pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Montageausschnitt (Kontakttrager) Panel cut out (insert) HvE Arbeitskontakt / working contact Schaltkontakt / mating contact Derating Kurve / Derating curve Strombelastbarkeit I (A) Current carrying capacity I (A) Begrenzung durch Leiter beachten Notice restriction of wire Kurve a Anschlussquerschnitt 1,5 mm2 Curve a wire gauge 1,5 mm2 Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve b Anschlussquerschnitt 2,5 mm2 Curve b wire gauge 2,5 mm2 1) mit Drahtschutz / with wire protection Amphenol 99 C 146 HvE 20 + 26 + 32 + 660 V~ 16 / 22 A +4 +4 4 nacheilende Schaltkontakte 4 delayed mating contacts +4 Steckverbinder Connectors Bezeichnung - Abbildung Description - Figure Gehause auf Anfrage Housings upon request Mazeichnung / Drawing Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatze Schraubanschluss 1) Contact inserts screw termination 1) 20 + + 4 Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert C146 10A010 102 3 (1 - 24) + C146 10A010 104 3 (25 - 48) C146 10B010 102 3 (1 - 24) + C146 10B010 104 3 (25 - 48) C146 10A010 102 3 (1 - 24) + C146 10A016 102 3 (1 - 16) C146 10A010 102 3 (1 - 24) + C146 10B016 102 3 (1 - 16) C146 10A016 102 3 (1 - 16) + C146 10A016 104 3 (17 - 32) C146 10B016 102 3 (1 - 16) + C146 10B016 104 3 (17 - 32) Arbeitskontakt / working contact Schaltkontakt / mating contact Leerstelle / without contact Kontakteinsatze Schraubanschluss 1) Contact inserts screw termination 1) 26 + + 4 Arbeitskontakt / working contact Schaltkontakt / mating contact Leerstelle / without contact Kontakteinsatze Schraubanschluss 1) Contact inserts screw termination 1) 32 + + 4 Arbeitskontakt / working contact Schaltkontakt / mating contact 1) mit Drahtschutz / with wire protection 100 Amphenol C 146 S Hauptmerkmale Main characteristics * Bemessungsspannung 125 V * Bemessungsstrom 10 A * Anschlussart: crimpen * Polzahl: 57 * Rated voltage 125 V * Rated current 10 A * Termination: crimping * Number of contacts: 57 Amphenol S 101 C 146 S Kurzinformation Brief information Allgemeine Hinweise * Kontakteinsatze ohne Crimpkontakte (bei Kontakteinsatz mit Crimpanschluss). * Steckverbinder der Serie C 146 S durfen nicht unter Last betatigt werden. * Crimpwerkzeuge siehe separater Katalog Werkzeuge". * Fur die Einsatze der Serie C 146 S konnen sowohl niedrige, wie auch hohe Gehausebauformen verwendet werden. * Verarbeitungs- und Montagehinweise von Crimpkontakten, siehe Katalog Werkzeuge". General information * Contact inserts without crimp contacts. * Do not mate or unmate A 146 S connectors under electrical load. * Crimping tools see separate catalogue Tools". * Low and high profile housings for C 146 S series inserts. * Processing instruction for crimp contacts see catalogue Tools". Hoher Schutz vor Fehlsteckungen Buchsenkontakteinsatz mit trichterformiger, verengter Steckoffnung. (hohe Steck- und Kontaktsicherheit) High protection against mismating Female inserts with funnel shaped contact entry avoids mismating. (high security in mating and contacting) Voreilender Schutzkontakt (am Kontakteinsatz) First-to-mate last-to-break protective ground contact (at the contact insert) 102 Amphenol C 146 S Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Polzahl Number of contacts 57 + Anschlusstechnik Termination technique crimpen crimp Max. wire gauge 2,5 mm2 Protection class IP 54 Max. wire diameter 3,5 mm Maximaler Leiterquerschnitt Flammability 1) Norm / Standard Wert / Value UL 94 V-1 Elektrische Kennwerte Electrical Characteristics Bemessungsspannung Rated voltage IEC 60664-1 150 V Verschmutzungsgrad Pollution degree IEC 60664-1 3 Isolierstoffgruppe Material group IEC 60664-1 III a Bemessungs-Stospannung Rated impulse withstand voltage IEC 60664-1 3,0 kV Spannungsfestigkeit Voltage proof IEC 60512-2; Test 4 a 1,4 kV Strombelastbarkeit Current carrying capacity IEC 60512-2 siehe Derating Kurven / see derating curves Durchgangswiderstand Contact resistance IEC 60512-2 <5m Isolationswiderstand Insulation resistance IEC 60512-2 10 10 Luftstrecke Clearance IEC 60664-1 1,6 mm Kriechstrecke Creepage IEC 60664-1 3 mm Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 125 / 21 Mechanische Kennwerte Mechanical Characteristics Gesamt Steck- und Ziehkraft Insertion and withdrawal forces IEC 60529 250 N 1) IP-Schutzart Stifteinsatz IP-degree of protection pin insert IEC 60529 gesteckt/mated IP20 1) IP-Schutzart Buchseneinsatz IP-degree of protection socket insert IEC 60529 gesteckt/mated IP20 Gewicht Stifteinsatz Weight Male insert 60 g Gewicht Buchseneinsatz Weight Female insert 55 g Mechanische Lebensdauer Mechanical operation > 500 Steckzyclen / mating cycles Werkstoffe Materials Kontakteinsatz Insert PPO Schraubkontakte Screw contacts CuZn (Messing/brass) Crimpkontakt Stift Male crimp contacts CuZn (Messing/brass) Crimpkontakt Buchse Female crimp contacts CuSn (Zinnbronze / Tin bronce) Kontaktoberflache Contakt plating Ag Farbe Colour grau / grey Gehause Housings Aluminium Druckguss / Aluminium die cast Dichtgummi Rubber gasket Neoprene / Neoprene S IP-Schutzart im Anschlussbereich der Schraub-/Lotausfuhrung IP 00 IP-degree of protection on termination side of screw/solder version IP 00 Amphenol 103 C 146 S 125 V~ 10 A 57 + Steckverbinder Connectors Gehause siehe Seite 106 Housings see page 106 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Bestell Nr. / Part No. Stifteinsatz / Male insert Buchseneinsatz / Female insert Kontakteinsatz Crimpanschluss mit Kodiereinrichtung 6 Pos. Contact insert crimp termination incl. polarisation 6 Pos. Stifteinsatz Male insert C146 10A057 000 6 C146 10B057 000 6 C146 10A057 801 6 C146 10B057 801 6 Buchseneinsatz Female insert Kontakteinsatz Crimpanschluss ohne Kodiereinrichtung Contact insert crimp termination without polarisation Stifteinsatz Male insert Buchseneinsatz Female insert 104 Amphenol Gestanzte Einzelkontakte Stamped single contacts C 146 S 57 + Gestanzte Bandkontakte fur Crimpzangen Gestanzte Bandkontakte fur Crimpmaschinen Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines 200 / 100 Stuck 200 / 100 pcs 2000 pcs (feeding left or right hand side) Crimpkontakte Crimp contacts Lieferform Supplied as 2000 Stuck (Zufuhrung links oder rechts) fur Leiterquerschnitt for wire gauge AWG Stuckzahl Pieces Bestell Nr. 1) / Part No. 1) Stiftkontakt / Male contact Buchsenkontakt / Female contact 20 - 16 16 - 14 100 100 VN01 025 0007 (101) VN01 025 0008 (101) VN02 025 0001 (101) VN02 025 0010 (101) ZN01 025 0007 (1) ZN01 025 0008 (1) ZN02 025 0001 (1) ZN02 025 0010 (1) HN01 025 0007 (1) HN01 025 0008 (1) TN01 025 0007 (1) TN01 025 0008 (1) HN02 025 0001 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) Gestanzte Einzelkontakte / Stamped single contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 Gestanzte Bandkontakte fur Crimpzangen / Stamped contacts on reel for hand crimping tools 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 16 - 14 200 100 Gestanzte Bandkontakte fur Crimpmaschinen / Stamped contacts on reel for crimp machines Kontaktzufuhrung rechts Contact feeding right hand side Kontaktzufuhrung links Contact feeding left hand side 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 20 - 16 16 - 14 20 - 16 16 - 14 2000 2000 2000 2000 Steckbild / Pin layout Stifteinsatz Male insert Buchseneinsatz Female insert Derating Kurven / Derating curves S Lot / solder Strombelastbarkeit I (A) Current carrying capacity I (A) Strombelastbarkeit I (A) Current carrying capacity I (A) Crimp / crimp Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) Kurve a Anschlussquerschnitt 1,5 mm2 / Curve a Kurve b Anschlussquerschnitt 2,5 mm2 / Curve b 1) 1) Erlauterung der Bestell-Nr. fur die Kontakte siehe Seite 4 Explanation of the Part No. for contacts see page 4 Amphenol Bauelement Umgebungstemperatur Tu (C) Ambient temperature Tamb (C) wire gauge 1,5 mm2 wire gauge 2,5 mm2 Abisolierlangen siehe S. 198 Stripping length see p. 198 105 C 146 S 57 pol. Gehause Hoods, housings Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile 21 T 1860 000 29 T 1860 010 Gehauseoberteile / Hoods Tullengehause, Abgang Seite Hood, side entry 36 Gehauseunterteile / Housings Anbaugehause 1) Housing bulkhead mounting 1) Sockelgehause, 1 Kabelabgang Housing, single side entry - T 1861 002 - T 1861 012 (mit Feder am Verriegelungsbugel with spring cover on locking lever) - T 1862 001 Montageausschnitt fur Anbaugehause / Panel cut for housing bulkhead mounting 1) incl. Dichtung / incl. gasket 106 Amphenol C 146 Gehause / Housings Fur Serien For series * C 146 D / DD * C 146 E * C 146 M * C 146 A * C 146 HSE * C 146 HvE * C 146 D / DD * C 146 E * C 146 M * C 146 A * C 146 HSE * C 146 HvE Amphenol 107 C 146 Gehause Housings Kurzinformation Brief information Allgemeine Hinweise General information * Die Steckverbindungen der Serie C 146 sind fur Einsatzbereiche im allgemeinen Maschinen-, Anlagen- und Apparatebau, Steuerungs- und Elektrogeratebau vorgesehen. Die Uberprufung, ob die Steckverbindung anderen als den angegebenen Vorschriften entspricht, bzw. ob diese in speziell von uns nicht vorhersehbaren Anwendungsbereichen eingesetzt werden kann, obliegt dem Anwender. * Bei Kupplungsgehausen ist eine ausreichende Zugentlastung sicherzustellen. * Bei Einsatz von Gehausen ohne Stutzen wird der Kabelraum beeintrachtigt. * Die angegebenen Bemaungen bei den Montageausschnitten stellen Anhaltswerte dar und sind im konkreten Anwendungsfall auf die Produkte abzustimmen. * Die Dichtflache bei den Anbaugehausen muss eben und gratfrei sein. * The connectors of our C 146 series are designed for use in machine tools, general electric installations and applications as well as for industrial control and other electrical equipment. Other applications than the above mentioned are in the responsibility of the user. * For cable to cable connections a suitable cable clamp has to be used. * The use of housings without stud impairs the cable room. * The indicated dimensions with the panel cut-outs represent reference values and are in the concrete application with products to be co-ordinated. * The sealing area of the housing has to be level and free of burrs. Groe Gehauseauswahl in 2 Bauhohen Large range of housings in 2 different heights Genormte Steckverbindergehause nach DIN 43652 DIN EN 175 301-801 (DIN 43652) Standardised connector housings according DIN 43652 DIN EN 175 301-801 (DIN 43652) Weitere Sonderausfuhrung auf Anfrage Special housing on request z. B. Korrosions geschutzte Gehause e. G. corrosion protected housings 108 Sondertypen Customer specials Amphenol C 146 Gehause Housings Technische Daten Characteristics Allgemeine Kennwerte General Characteristics Schutzart Gehause Protection class housing Schutzart Klappdeckel verriegelt unverriegelt Protetion class spring cover locked spring loaded Verriegelungssystem Locking system Norm / Standard Wert / Value IP 65 DIN EN 175 301-801 (DIN 43 652) IP 65 IP 54 1 Langsbugel / 1 locking lever 2 Querbugel / 2 locking levers Klimatische Kennwerte Climatical Characteristics Prufklasse Climatic category IEC 60068-1 40 / 100 / 21 Temperaturbereich Temperature range IEC 60068-1 - 40 C / + 100 C Obere Grenztemperatur Upper temperature IEC 60512-6; Test 11 i + 100 C / 1000 h Untere Grenztemperatur Lower temperature IEC 60512-6; Test 11 i - 40 C Mechanische Kennwerte Mechanical Characteristics Mechanische Lebensdauer Mechanical operation IEC 60512-5; Test 9 a 500 Zyklen / cycles Werkstoffe Materials Gehause Housings DIN EN 175 301-801 (DIN 43 652) Aluminium-Druckguss Aluminium die cast alloy Kunststoffgehause Thermoplastic housing PA Metallgehause D 7 Metal housing D 7 Zink-Druckguss / Zinc die cast alloy Schutzkappe Protective cover PA Dichtgummi Rubber gasket NBR Verriegelung Locking lever Stahl / verzinkt steel / zinc coated Oberflache EMV Gehause Surface EMV housings Spezialbeschichtung / special surface Amphenol 109 C 146 D 7 pol. C 146 A 3/4 pol. Gehause Kunststoff Housings thermoplastic Bezeichnung - Abbildung Description - Figure PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. Part No. Tullengehause, gerader Kabelausgang Hood, top entry 11 C146 10G003 600 4 Tullengehause, seitlicher Kabelausgang Hood, side entry 11 C146 10G003 500 4 - C146 10F003 000 4 - C146 10F003 004 4 11 C146 10F003 500 4 11 C146 10G003 804 4 - C146 10Z003 100 4 Gehauseoberteile / Hoods Gehauseunterteile / Housings Anbaugehause (incl. Flachdichtung) Housing bulkhead mounting (incl. gasket) Montageausschnitt/panel cut out: 22 x 22 mm Anbaugehause (incl. Flachdichtung) Housing bulkhead end mounting (incl. gasket) Montageausschnitt/panel cut out: 22 x 22 mm Sockelgehause, 1 Kabelausgang Housing, single side entry Montageausschnitt/panel cut out: 22 x 22 mm Kupplungsgehause, 1 Kabelausgang Hood, cable to cable coupling Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile (nur in Verbindung mit Stifteinsatz) Cover for housings (only in connection with male insert) 110 Amphenol C 146 D 7 pol. C 146 A 3/4 pol. Gehause Kunststoff Housings thermoplastic Bezeichnung - Abbildung Description - Figure Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. mit Stutzen / with stud ohne Stutzen / without stud 20 C146 10R003 600 4 (grau) 20 C146 16R003 600 4 (sw) 20 C146 10R003 500 4 (grau) 20 C146 16R003 500 4 (sw) - C146 10F003 000 4 (grau) Gehauseoberteile / Hoods Tullengehause, gerader Kabelausgang Hood, top entry Tullengehause, seitlicher Kabelausgang Hood, side entry Gehauseunterteile / Housings Anbaugehause (incl. Flachdichtung) Housing bulkhead mounting (incl. gasket) C146 16F003 000 4 (sw) Montageausschnitt/panel cut out: 22 x 22 mm Anbaugehause (incl. Flachdichtung) Housing bulkhead end mounting (incl. gasket) - C146 10F003 004 4 20 C146 10N003 500 4 (grau) mit Verschraubung/ with gland bushing Montageausschnitt/panel cut out: 22 x 22 mm Sockelgehause, 1 Kabelausgang Housing, single side entry 20 C146 16N003 500 4 (sw) mit Verschraubung/ with gland bushing Montageausschnitt/panel cut out: 22 x 22 mm Kupplungsgehause, 1 Kabelausgang Hood, cable to cable coupling 20 C146 10R003 804 4 - C146 10Z003 100 4 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile (nur in Verbindung mit Stifteinsatz) Cover for housings (only in connection with male insert) Amphenol 111 C 146 D 7 pol. C 146 A 3/4 pol. Gehause Metall Housings metal PG-Gewinde PG-thread PG Bestell Nr. Part No. Tullengehause, gerader Kabelausgang Hood, top entry 11 C146 30G003 600 4 Tullengehause, seitlicher Kabelausgang Hood, side entry 11 C146 30G003 500 4 Anbaugehause (incl. Flachdichtung) Housing bulkhead mounting (incl. gasket) - C146 30F003 000 4 Anbaugehause (incl. Flachdichtung) Housing bulkhead end mounting (incl. gasket) - C146 30F003 004 4 Sockelgehause, 1 Kabelausgang Housing, single side entry 11 C146 30F003 500 4 Kupplungsgehause, 1 Kabelausgang Hood, cable to cable coupling 11 C146 30G003 804 4 - C146 30Z003 100 4 Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing Gehauseoberteile / Hoods Gehauseunterteile / Housings Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile (nur in Verbindung mit Stifteinsatz) Cover for housings (only in connection with male insert) Verschraubung fur Tullen- und Sockelgehause siehe Seite 170 - 173 / gland bushings for hoods and housing see page 170-173 112 Amphenol C 146 D 7 pol. C 146 A 3/4 pol. Gehause Metall (metrisch) Housings metal (metric) Bezeichnung - Abbildung Description - Figure Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. mit Stutzen / with stud ohne Stutzen / without stud Tullengehause, gerader Kabelausgang Hood, top entry 20 C146 30R003 600 4 Tullengehause, seitlicher Kabelausgang Hood, side entry 20 C146 30R003 500 4 Anbaugehause (incl. Flachdichtung) Housing bulkhead mounting (incl. gasket) - C146 30F003 000 4 Anbaugehause (incl. Flachdichtung) Housing bulkhead end mounting (incl. gasket) - C146 30F003 004 4 Sockelgehause, 1 Kabelausgang Housing, single side entry 20 C146 30N003 500 4 Kupplungsgehause, 1 Kabelausgang Hood, cable to cable coupling 20 C146 30R003 804 4 - C146 30Z003 100 4 Gehauseoberteile / Hoods Gehauseunterteile / Housings C146 31N003 500 4 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile (nur in Verbindung mit Stifteinsatz) Cover for housings (only in connection with male insert) Amphenol 113 C 146 D 15 pol. C 146 A 10 pol. nach DIN EN 175 301 - 801 (DIN 43 652) Gehause Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Niedrige Bauform/ Low profile Bestell Nr. / Part No. Hohe Bauform/ High profile Gehauseoberteile / Hoods 13,5 C146 10G010 600 4 Tullengehause, Abgang oben Hood, top entry 16 C146 10G010 601 4 16 C146 10G015 601 2 21 C146 10G015 600 2 13,5 C146 10G010 501 4 Tullengehause, Abgang Seite Hood, side entry 16 C146 10G010 500 4 16 C146 10G015 501 2 21 C146 10G015 500 2 Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application h 47,5 13,5 C146 10G010 804 4 47,5 16 59 1) 21 C146 10G010 805 4 C146 10G015 804 2 Anbaugehause 1) Housing, bulkhead mounting - C146 10F015 000 2 Anbaugehause, mit Klappdeckel 1) Housing, bulkhead mounting, with spring cover - C146 10F015 003 2 incl. Flachdichtung / incl. gasket 114 Amphenol according to DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud ohne Stutzen /without stud 20 C146 10R010 650 4 C146 21R010 650 4 25 C146 10R010 600 4 C146 21R010 600 4 20 C146 10R015 650 2 C146 21R015 650 2 25 C146 10R015 600 2 C146 21R015 600 2 20 C146 10R010 550 4 C146 21R010 550 4 25 C146 10R010 500 4 C146 21R010 500 4 20 C146 10R015 550 2 C146 21R015 550 2 25 C146 10R015 500 2 C146 21R015 500 2 h 47,5 20 C146 10R010 854 4 C146 21R010 854 4 47,5 25 C146 10R010 804 4 C146 21R010 804 4 59 20 25 Amphenol C146 10R015 854 2 C146 10R015 804 2 - C146 10F015 000 2 - C146 10F015 003 2 C146 21R015 854 2 C146 21R015 804 2 115 C 146 D 15 pol. C 146 A 10 pol. nach DIN EN 175 301 - 801 (DIN 43 652) Gehause Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. 1 Kabelabgang 2 Kabelabgange single side entry double side entry 16 C146 10F015 501 2 C146 10F015 601 2 21 C146 10F015 500 2 C146 10F015 600 2 16 C146 10F015 807 2 C146 10F015 607 2 21 C146 10F015 806 2 C146 10F015 606 2 Gehauseunterteil / Housings Sockelgehause Housing 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause mit Klappdeckel Housing with spring cover 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z015 100 2 Montageausschnitt / Panel cut out Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 116 Amphenol according to DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M 1 Kabelabgang single side entry 20 20 20 C146 10N015 501 2 25 25 25 C146 10N015 500 2 20 20 20 C146 10N015 807 2 25 25 25 C146 10N015 806 2 Bestell Nr. / Part No. 2 Kabelabgange double side entry 2 Kabelabgange (rechts + unten) double side entry (right + bottom) C146 10N015 601 2 C146 10N015 703 2 C146 10N015 600 2 C146 10N015 702 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry C146 10N015 607 2 C146 10N015 709 2 C146 10N015 606 2 C146 10N015 708 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry - Amphenol C146 10Z015 100 2 117 C 146 D 25 pol. C 146 A 16 pol. nach DIN EN 175 301 - 801 (DIN 43 652) Gehause Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Niedrige Bauform/ Low profile Bestell Nr. / Part No. Hohe Bauform/ High profile Gehauseoberteile / Hoods 16 Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry C146 10G016 600 4 16 C146 10G025 601 2 21 C146 10G025 600 2 13,5 C146 10G016 501 4 16 C146 10G016 500 4 16 C146 10G025 501 2 21 C146 10G025 500 2 Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application h 52,5 13,5 C146 10G016 805 4 52,5 16 65 1) 21 C146 10G016 804 4 C146 10G025 804 2 Anbaugehause 1) Housing, bulkhead mounting - C146 10F025 000 2 Anbaugehause, mit Klappdeckel 1) Housing, bulkhead mounting, with spring cover - C146 10F025 003 2 incl. Flachdichtung / incl. gasket 118 Amphenol according to DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud ohne Stutzen /without stud 20 C146 10R016 650 4 C146 21R016 650 4 25 C146 10R016 600 4 C146 21R016 600 4 20 C146 10R025 650 2 C146 21R025 650 2 25 C146 10R025 600 2 C146 21R025 600 2 20 C146 10R016 550 4 C146 21R016 550 4 25 C146 10R016 500 4 C146 21R016 500 4 20 C146 10R025 550 2 C146 21R025 550 2 25 C146 10R025 500 2 C146 21R025 500 2 h 52,5 20 C146 10R016 854 4 C146 21R016 854 4 25 C146 10R016 804 4 C146 21R016 804 4 65 52,5 20 C146 10R025 854 2 C146 21R025 854 2 25 C146 10R025 804 2 C146 21R025 804 2 65 Amphenol - C146 10F025 000 2 - C146 10F025 003 2 119 C 146 D 25 pol. C 146 A 16 pol. nach DIN 43 652 (CECC 75 301 - 801; EN 175 301 - 801) Gehause Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. 1 Kabelabgang 2 Kabelabgange single side entry double side entry 16 C146 10F025 501 2 C146 10F025 601 2 21 C146 10F025 500 2 C146 10F025 600 2 16 C146 10F025 807 2 C146 10F025 607 2 21 C146 10F025 806 2 C146 10F025 606 2 Gehauseunterteil / Housings Sockelgehause Housing 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause mit Klappdeckel Housing with spring cover 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z025 100 2 Montageausschnitt / Panel cut out PG Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / PG gland bushings for hoods and housing see page 170-173 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet 120 Amphenol according to DIN 43 652 (CECC 75 301 - 801; EN 175 301 - 801) Metrisches Gewinde Metric thread Mazeichnung Drawing M 1 Kabelabgang single side entry 20 20 20 C146 10N025 501 2 25 25 25 C146 10N025 500 2 20 20 20 C146 10N025 807 2 25 25 25 C146 10N025 806 2 Bestell Nr. / Part No. 2 Kabelabgange double side entry 2 Kabelabgange (rechts + unten) double side entry (right + bottom) C146 10N025 601 2 C146 10N025 703 2 C146 10N025 600 2 C146 10N025 702 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry C146 10N025 607 2 C146 10N025 709 2 C146 10N025 606 2 C146 10N025 708 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry - Amphenol C146 10Z025 100 2 121 C 146 D 50 pol. C 146 A 32 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. Part No. 21 C146 10G032 600 4 29 C146 10G032 601 4 21 C146 10G032 500 4 29 C146 10G032 501 4 Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry Kupplungsgehause Hood, coupling application S 70,8 82 66 49,6 56 H 3 Tg/M Tg/Pg Tullengehause, Abgang oben Hood, top entry Tg/M Tg/Pg Ts/Pg H 3 Ts/M 56 49,6 66 82 70,8 S Tullengehause, Abgang Seite Hood, side entry Tg/M Tg/Pg Ts/Pg H 3 Ts/M 56 49,6 66 82 70,8 S Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 122 Amphenol C 146 D 50 pol. C 146 A 32 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Metrisches Gewinde Metric thread Mazeichnung Drawing M Gehauseoberteile / Hoods Bestell Nr. Part No. ohne Stutzen / without stud Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry Kupplungsgehause Hood, coupling application S 70,8 82 66 49,6 C146 21R032 650 4 32 C146 21R032 600 4 40 C146 21R032 601 4 25 C146 21R032 550 4 32 C146 21R032 500 4 40 C146 21R032 501 4 25 C146 21R032 852 4 32 C146 21R032 802 4 40 C146 21R032 803 4 25 C146 21R032 652 4 32 C146 21R032 602 4 40 C146 21R032 603 4 25 C146 21R032 552 4 32 C146 21R032 502 4 40 C146 21R032 503 4 H 56 25 M M Tullengehause, Abgang oben Hood, top entry M H M 56 49,6 66 82 70,8 S Tullengehause, Abgang Seite Hood, side entry M H M Amphenol 56 49,6 66 82 70,8 S 123 C 146 D 50 pol. C 146 A 32 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. Part No. Anbaugehause 1) Housing, bulkhead mounting - C146 10F032 000 4 Anbaugehause 1) mit Bolzen und Klappdeckel Housing 1), bulkhead mounting and with spring cover - C146 10F032 002 4 Sockelgehause, 1 Kabelabgang Housing, single side entry 21 C146 10F032 500 4 29 C146 10F032 501 4 21 C146 10F032 600 4 29 C146 10F032 601 4 Gehauseunterteile / Housings Sockelgehause, 2 Kabelabgange Housing, double side entry Montageausschnitt / Panel cut out 1) incl. Flachdichtung / incl. gasket Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet 124 Amphenol C 146 D 50 pol. C 146 A 32 pol. Gehause Housings Metrisches Gewinde Metric thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing M Gehauseunterteile / Housings Bestell Nr. Part No. mit Stutzen / with stud Anbaugehause Housing, bulkhead mounting - C146 10F032 000 4 Anbaugehause 1) mit Bolzen und Klappdeckel Housing 1), bulkhead mounting and with spring cover - C146 10F032 002 4 Sockelgehause, 1 Kabelabgang Housing, single side entry 25 C146 10N032 550 4 32 C146 10N032 500 4 40 C146 10N032 501 4 25 C146 10N032 650 4 32 C146 10N032 600 4 40 C146 10N032 601 4 1) Sockelgehause, 2 Kabelabgange Housing, double side entry Montageausschnitt / Panel cut out Amphenol 125 C 146 E C 146 M C 146 DD C 146 EE 6 pol. 2 Module 24 pol. 10 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Gehause fur Langsbugelverriegelung in Anlehnung an DIN EN 175 301 - 801 (DIN 43 652) PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods 13,5 C146 10G006 600 1 Tullengehause, Abgang oben Hood, top entry 16 C146 10G006 601 1 16 C146 10G006 656 8 21 C146 10G006 606 8 29 C146 10G006 607 8 13,5 C146 10G006 500 1 Tullengehause, Abgang Seite Hood, side entry 16 C146 10G006 501 1 16 C146 10G006 556 8 21 C146 10G006 506 8 29 C146 10G006 507 8 Gehauseunterteile / Housings Kupplungsgehause, Hood, coupling application 1) h 52 13,5 C146 10G006 804 1 52 16 70 21 C146 10G006 804 8 70 29 C146 10G006 805 8 C146 10G006 805 1 Anbaugehause 1) Housing, bulkhead mounting 1) - C146 10F006 000 1 Anbaugehause mit Klappdeckel 1) Housing, bulkhead mounting with spring cover 1) - C146 10F006 003 1 incl. Flachdichtung / incl. gasket 126 Amphenol housings for 1 locking-lever-system in accordance with DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud Amphenol ohne Stutzen /without stud 16 C146 10R006 656 1 C146 21R006 656 1 20 C146 10R006 606 1 C146 21R006 606 1 25 C146 10R006 607 1 C146 21R006 607 1 25 C146 10R006 656 8 C146 21R006 656 8 32 C146 10R006 606 8 C146 21R006 606 8 20 C146 10R006 506 1 C146 21R006 506 1 25 C146 10R006 507 1 C146 21R006 507 1 25 C146 10R006 556 8 C146 21R006 556 8 32 C146 10R006 506 8 C146 21R006 506 8 h 52 20 C146 10R006 804 1 C146 21R006 804 1 52 25 C146 10R006 805 1 C146 21R006 805 1 70 25 C146 10R006 854 8 C146 21R006 854 8 70 32 C146 10R006 804 8 C146 21R006 804 8 - C146 10F006 000 1 - C146 10F006 003 1 127 C 146 E C 146 M C 146 DD C 146 EE 6 pol. 2 Module 24 pol. 10 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Gehause fur Langsbugelverriegelung in Anlehnung an DIN EN 175 301 - 801 (DIN 43 652) PG-Gewinde PG-thread Mazeichnung Drawing PG Niedrige Bauform/ Low profile Bestell Nr. / Part No. Hohe Bauform/ High profile Gehauseunterteil / Housings h Sockelgehause Housing 54 54/74 74 74 74 16 C146 10F006 500 1 C146 10F006 803 2 16/21 C146 10F006 502 1 (*l C146 10F006 503 2 (*l 21 29 C146 10F006 802 2 29 C146 10F006 502 2 (*l 2 Kabelabgange / Double side entry 54 74 74 16 21 29 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1 Kabelabgang / Single side entry C146 10F006 600 1 C146 10F006 603 2 C146 10F006 602 2 1 Kabelabgang / Single side entry Sockelgehause mit Klappdeckel Housing with spring cover 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 54 54/74 74 74 74 C146 10F006 806 1 16 16/21 C146 10F006 506 1 (*l C146 10F006 807 2 21 C146 10F006 507 2 (*l 29 C146 10F006 806 2 29 C146 10F006 506 2 (*l 2 Kabelabgange / Double side entry 54 74 74 16 21 29 C146 10F006 606 1 C146 10F006 607 2 C146 10F006 606 2 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z006 100 1 Schutzkappe fur Gehauseoberteile Cover for housings - C146 10Z006 200 1 Sondergehause / Special housings Tullengehause ohne Stutzen Hood, without stud 16 C146 21G006 501 1 21 C146 21G006 506 8 Montageausschnitt / Panel cut out Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet 128 Amphenol housings for 1 locking-lever-system in accordance with DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile 1 Kabelabgang h 54 20 C146 10N006 503 1 54/74 25 C146 10N006 802 1 54/74 25 74 1 Geschlossen bei einem Kabelausgang 1 closed if single entry C146 10N006 803 1 20 54 32 74 32 54 54 54/74 54/74 74 74 20 20 25 25 32 32 2 Kabelabgange C146 10N006 502 1 C146 10N006 603 1 (*l C146 10N006 703 1(*r+u C146 10N006 602 1 C146 10N006 803 2 (*l C146 10N006 503 2 (*l C146 10N006 603 2 (*r+u C146 10N006 702 1 C146 10N006 602 2 C146 10N006 802 2 C146 10N006 502 2 (*l C146 10N006 807 1 C146 10N006 507 1(*l C146 10N006 806 1 C146 10N006 807 2 C146 10N006 506 1(*l C146 10N006 507 2(*l C146 10N006 806 2 C146 10N006 506 2(*l C146 10N006 607 1 C146 10N006 709 1(*r+u C146 10N006 607 2 C146 10N006 606 1 C146 10N006 708 1(*r+u C146 10N006 606 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry - C146 10Z006 100 1 - C146 10Z006 200 1 (*r+u (*l rechts und unten / right and buttom links / left Amphenol 129 C 146 E C 146 M C 146 DD C 146 HvE C 146 EE 10 pol. 3 Module 42 pol. 3 pol. 18 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Gehause fur Querbugelverriegelung in Anlehnung an DIN EN 175 301 - 801 (DIN 43 652) * sichere 4-Punkt Verriegelung * bevorzugt bei seitlicher Anreihung * fliegende Verbindung moglich PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry 16 C146 10G010 600 1 21 C146 10G010 601 1 16 C146 10G010 650 8 21 C146 10G010 600 8 C146 10G010 601 8 29 Tullengehause, Abgang Seite Hood, side entry 16 C146 10G010 500 1 21 C146 10G010 501 1 16 C146 10G010 550 8 21 C146 10G010 500 8 29 C146 10G010 501 8 Gehauseunterteile / Housings h 51 Kupplungsgehause Hood, coupling application 16 C146 10G010 802 1 51/70 21 C146 10G010 803 1 C146 10G010 802 8 C146 10G010 803 8 29 Anbaugehause 1) Housing, bulkhead mounting 1) - C146 10F010 000 1 Winkelanbaugehause 1) Right-angled housing 1) - C146 10F010 090 1 Sockelgehause Housing h 57 74 74 1 Kabelabgang / single side entry 16 21 29 C146 10F010 500 1 C146 10F010 501 2 C146 10F010 500 2 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed sealing plug if single entry 57 74 74 16 21 29 C146 10F010 600 1 C146 10F010 601 2 C146 10F010 600 2 Montageausschnitt fur Anbaugehause / Panel cut out for housing bulkhead mounting Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 1) incl. Flachdichtung / incl. gasket 130 Amphenol housings for 2 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * secured 4 point locking * prefered for side by side mounting * cable to cable possible Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud 20 C146 10R010 650 1 C146 21R010 650 1 25 C146 10R010 600 1 C146 21R010 600 1 25 C146 10R010 650 8 C146 21R010 650 8 32 C146 10R010 600 8 C146 21R010 600 8 20 C146 10R010 550 1 C146 21R010 550 1 25 C146 10R010 500 1 C146 21R010 500 1 25 C146 10R010 550 8 C146 21R010 550 8 32 C146 10R010 500 8 C146 21R010 500 8 20 25 32 40 (*r+u C146 10R010 852 8 C146 10R010 802 8 C146 10R010 803 8 C146 21R010 852 1 C146 21R010 802 1 C146 21R010 803 1 C146 10F010 000 1 - C146 10F010 090 1 1 Kabelabgang / single side entry 57 20 57 20 57/74 25 25 57 74 C146 10R010 852 1 C146 10R010 802 1 C146 10R010 803 1 - h 1.) Verschlussschraube bei einem Kabelausgang 1.) Screwed sealing plug if single entry C146 21R010 601 8 C146 10R010 601 8 40 h 51 51/70 51/70 70 ohne Stutzen /without stud 32 C146 10N010 501 1 C146 21R010 852 8 C146 21R010 802 8 C146 21R010 803 8 2 Kabelabgange / Double side entry C146 10N010 601 1 C146 10N010 701 1(*r+u C146 10N010 500 1 C146 10N010 501 2 C146 10N010 600 1 C146 10N010 601 2 (*r+u C146 10N010 700 1 C146 10N010 500 2 C146 10N010 600 2 rechts und unten / right and buttom Amphenol 131 C 146 E C 146 M C 146 DD C 146 HvE C 146 EE 10 pol. 3 Module 42 pol. 3 pol. 18 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Gehause fur Langsbugelverriegelung in Anlehnung an DIN EN 175 301 - 801 (DIN 43 652) * leichtes Bedienen auch bei seitlichem Kabelabgang * Schutzkappe am Gehauseunterteil verriegelbar * fliegende Verbindung moglich PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 16 C146 10G010 606 1 21 C146 10G010 607 1 21 C146 10G010 606 8 29 C146 10G010 607 8 16 C146 10G010 506 1 21 C146 10G010 507 1 21 C146 10G010 506 8 29 C146 10G010 507 8 Gehauseunterteile / Housings h 51 Kupplungsgehause Hood, coupling application 16 C146 10G010 804 1 51/70 21 C146 10G010 805 1 70 C146 10G010 805 8 Anbaugehause 1) Housing, bulkhead mounting 1) - C146 10F010 001 1 Anbaugehause mit Deckel 1) Housing with spring cover 1) - C146 10F010 003 1 1 Kabelabgang / Single side entry h 57 16 C146 10F010 802 1 57/74 16/21 C146 10F010 502 1 (*l C146 10F010 803 2 74 21 C146 10F010 503 2 (*l 74 29 C146 10F010 802 2 74 29 C146 10F010 502 2 (*l Sockelgehause Housing 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause mit Deckel Housing with spring cover 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) 29 C146 10G010 804 8 incl. Flachdichtung / incl. flat sealing 132 (*l links / left 2 Kabelabgange / Double side entry 57 74 74 h 57 57/74 74 74 74 16 21 29 57 74 74 16 21 29 C146 10F010 602 1 C146 10F010 603 2 C146 10F010 602 2 1 Kabelabgang / Single side entry 16 C146 10F010 806 1 16/21 C146 10F010 506 1 (*l 21 29 29 C146 10F010 807 2 C146 10F010 507 2 (*l C146 10F010 806 2 C146 10F010 506 2 (*l 2 Kabelabgange / Double side entry C146 10F010 606 1 C146 10F010 607 2 C146 10F010 606 2 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet Amphenol housings for 1 locking-lever-system in accordance with DIN EN 175 301 - 801 (DIN 43 652) * also easy to use for side entry * cover for housings lockable * cable to cable possible Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud h 51 51/70 51/70 70 20 C146 10R010 656 1 C146 21R010 656 1 25 C146 10R010 606 1 C146 21R010 606 1 32 C146 10R010 607 1 C146 21R010 607 1 25 C146 10R010 656 8 32 C146 10R010 606 8 40 C146 10R010 607 8 links / left Amphenol (*r+u C146 21R010 607 8 C146 10R010 556 1 C146 21R010 556 1 C146 10R010 506 1 C146 21R010 506 1 25 C146 10R010 556 8 C146 21R010 556 8 32 C146 10R010 506 8 C146 21R010 506 8 20 25 32 40 C146 10R010 854 1 C146 10R010 804 1 C146 10R010 805 1 C146 10R010 854 8 C146 10R010 804 8 C146 10R010 805 8 C146 21R010 854 1 C146 21R010 804 1 C146 21R010 805 1 - C146 10F010 001 1 - C146 10F010 003 1 1 Kabelabgang / Single side entry 20 C146 10N010 803 1 C146 10N010 603 1 57 20 C146 10N010 503 1 (*l C146 10N010 703 1 (r+u 57/74 25 C146 21R010 854 8 C146 21R010 804 8 C146 21R010 805 8 2 Kabelabgange / Double side entry h 57 C146 10N010 802 1 C146 10N010 803 2 C146 10N010 602 1 C146 10N010 603 2 C146 10N010 502 1 (*l C146 10N010 503 2 (*l C146 10N010 702 1 (r+u 74 32 C146 10N010 802 2 74 h 57 32 C146 10N010 502 2 (*l 20 C146 10N010 807 1 C146 10N010 607 1 57 20 C146 10N010 507 1 (*l C146 10N010 708 1 (r+u 1 Kabelabgang / Single side entry 57/74 25 (*l C146 21R010 606 8 25 57/74 25 1 Geschlossen bei einem Kabelausgang 1 closed if single entry C146 21R010 656 8 20 57/74 25 1 Geschlossen bei einem Kabelausgang 1 closed if single entry ohne Stutzen /without stud C146 10N010 602 2 2 Kabelabgange / Double side entry C146 10N010 806 1 C146 10N010 807 2 C146 10N010 606 1 C146 10N010 607 2 C146 10N010 506 1 (*l C146 10N010 507 2 (*l C146 10N010 709 1 (r+u 74 32 C146 10N010 806 2 74 32 C146 10N010 506 2 (*l C146 10N010 606 2 rechts und unten / right and buttom 133 C 146 E C 146 M C 146 DD C 146 HvE C 146 EE 10 pol. 3 Module 42 pol. 3 pol. 18 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Tullengehause mit Querbugel in Anlehnung an DIN EN 175 301 - 801 (DIN 43 653) * sichere 4-Punkt Verriegelung * Gehauseunterteil mit Schutzdeckel * keine Bugel am Gehauseunterteil PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 16 C146 10G010 602 1 21 C146 10G010 603 1 21 C146 10G010 602 8 29 C146 10G010 603 8 16 C146 10G010 502 1 21 C146 10G010 503 1 21 C146 10G010 502 8 29 C146 10G010 503 8 Gehauseunterteile / Housings - Anbaugehause mit Deckel 1) Housing, with spring cover 1) Sockelgehause, mit Deckel Housing, with spring cover C146 10F010 002 1 1 Kabelabgang / Single side entry h 57 57/74 74 74 74 16 C146 10F010 804 1 16/21 C146 10F010 504 1 (*l 21 29 29 57 16 74 21 74 29 C146 10F010 805 2 C146 10F010 505 2 (*l C146 10F010 804 2 C146 10F010 504 2 (*l 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause Housing C146 10F010 604 1 C146 10F010 605 2 C146 10F010 604 2 1 Kabelabgang / Single side entry h 74 21 C146 10F010 509 2 74 29 C146 10F010 508 2 74 21 C146 10F010 609 2 74 29 C146 10F010 608 2 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) incl. Flachdichtung / incl. gasket 134 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet Amphenol hoods with 2 locking-levers in accordance with DIN EN 175 301 - 801 (DIN 43 653) * secured 4 point locking * housing with cover * no locking levers at the housings Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud 20 C146 10R010 652 1 C146 21R010 652 1 25 C146 10R010 602 1 C146 21R010 602 1 25 C146 10R010 652 8 C146 21R010 652 8 32 C146 10R010 602 8 C146 21R010 602 8 40 C146 10R010 603 8 C146 21R010 603 8 20 C146 10R010 552 1 C146 21R010 552 1 25 C146 10R010 502 1 C146 21R010 502 1 25 C146 10R010 552 8 C146 21R010 552 8 32 C146 10R010 502 8 C146 21R010 502 8 - 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry (*l links / left Amphenol (*r+u ohne Stutzen /without stud C146 10F010 002 1 1 Kabelabgang / Single side entry 2 Kabelabgange / Double side entry h 57 20 C146 10N010 805 1 C146 10N010 605 1 57 20 C146 10N010 505 1 (*l C146 10N010 809 1(*r+u 57/74 25 C146 10N010 804 1 57/74 25 C146 10N010 504 1 (*l C146 10N010 505 2 (*l C146 10N010 808 1(*r+u C146 10N010 805 2 74 32 C146 10N010 804 2 74 32 C146 10N010 504 2 (*l h 57 20 C146 10N010 509 1 57/74 25 C146 10N010 508 1 74 1 Kabelabgang / Single side entry 32 C146 10N010 604 1 C146 10N010 605 2 C146 10N010 604 2 2 Kabelabgange / Double side entry C146 10N010 609 1 C146 10N010 509 2 C146 10N010 508 2 C146 10N010 608 1 C146 10N010 609 2 C146 10N010 608 2 rechts und unten / right and buttom 135 C 146 E C 146 M C 146 DD C 146 HvE C 146 EE 10 pol. 3 Module 42 pol. 3 pol. 18 pol. Gehause, Schutzkappen Housings, covers Bezeichnung - Abbildung Description - Figure Sondergehause fur Querbugelverriegelung, in Anlehnung an DIN EN 175 301 - 801 (DIN 43 653) special housings for 2 locking-system, in accordance with DIN EN 175 301 - 801 (DIN 43 653) PG-Gewinde PG-thread Mazeichnung Drawing PG Kabelabgang Bestell Nr. / Part No. cable outlet Niedrige Bauform / Low profile Hohe Bauform / High profile 16 Oben / top C146 21G010 600 1 Seite / side C146 21G010 500 1 Gehauseoberteile / Hoods Tullengehause ohne Stutzen Hood without stud 21 Tullengehause, 2 x Abgang Oben Hood, 2 top entry Oben / top C146 21G010 600 8 Seite / side C146 21G010 500 8 16 C146 10G010 902 8 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z010 100 1 Schutzkappe fur Gehauseoberteile Cover for hoods - C146 10Z010 200 1 Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 136 Amphenol C 146 E C 146 M C 146 DD C 146 HvE C 146 EE 10 pol. 3 Module 42 pol. 3 pol. 18 pol. Gehause, Schutzkappen Housings, covers Bezeichnung - Abbildung Description - Figure Sondergehause fur Querbugelverriegelung, in Anlehnung an DIN EN 175 301 - 801 (DIN 43 653) special housings for 2 locking-system, in accordance with DIN EN 175 301 - 801 (DIN 43 653) Metrisches Gewinde Metric thread Mazeichnung Drawing M Kabelabgang Bestell Nr. / Part No. cable outlet Niedrige Bauform / Low profile Hohe Bauform / High profile 20 Oben / top C146 21R010 650 1 20 Seite / side C146 21R010 550 1 25 Oben / top C146 21R010 600 1 25 Seite / side C146 21R010 500 1 25 Oben / top C146 21R010 650 8 25 Seite / side C146 21R010 550 8 32 Oben / top C146 21R010 600 8 32 Seite / side C146 21R010 500 8 40 Oben / top C146 21R010 601 8 Gehauseoberteile / Hoods Tullengehause ohne Stutzen Hood without stud Tullengehause, 2 x Abgang Oben Hood, 2 top entry C146 10R010 902 8 25 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z010 100 1 Schutzkappe fur Gehauseoberteile Cover for hoods - C146 10Z010 200 1 Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 Amphenol 137 C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 HvE C 146 EE 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 6 pol. 32 pol. Gehause fur Querbugelverriegelung nach DIN EN 175 301 - 801 (DIN 43 652) * sichere 4-Punkt Verriegelung * bevorzugt bei seitlicher Anreihung * fliegende Verbindung moglich Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 21 C146 10G016 600 1 29 C146 10G016 601 1 21 C146 10G016 600 8 29 C146 10G016 601 8 21 C146 10G016 500 1 29 C146 10G016 501 1 21 C146 10G016 500 8 29 C146 10G016 501 8 Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application h 62 21 C146 10G016 802 1 62 29 C146 10G016 803 1 76 21 C146 10G016 802 8 76 29 C146 10G016 803 8 Anbaugehause 1) Housing, bulkhead mounting 1) - Sockelgehause Housing h 64/77 21 77 C146 10F016 000 1 1 Kabelabgang / Single side entry C146 10F016 500 1 C146 10F040 501 2 C146 10F040 500 2 29 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 64/77 21 77 29 C146 10F016 600 1 C146 10F040 601 2 C146 10F040 600 2 Montageausschnitt fur Anbaugehause / Panel cut out for housing bulkhead mounting (*l 138 links / left Amphenol housings for 2 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * secured 4 point locking * prefered for side by side mounting * cable to cable possible Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud ohne Stutzen /without stud 25 C146 10R016 650 1 C146 21R016 650 1 32 C146 10R016 600 1 C146 21R016 600 1 25 C146 10R016 650 8 C146 21R016 650 8 32 C146 10R016 600 8 C146 21R016 600 8 40 C146 10R016 601 8 C146 21R016 601 8 25 C146 10R016 550 1 C146 21R016 550 1 32 C146 10R016 500 1 C146 21R016 500 1 25 C146 10R016 550 8 C146 21R016 550 8 32 C146 10R016 500 8 C146 21R016 500 8 40 C146 10R016 501 8 C146 21R016 501 8 h 62 25 C146 10R016 852 1 C146 21R016 852 1 62 32 C146 10R016 802 1 C146 21R016 802 1 76 25 C146 10R016 852 8 C146 21R016 852 8 76 32 C146 10R016 802 8 C146 21R016 802 8 40 C146 10R016 803 8 C146 21R016 803 8 C146 10F016 000 1 - h 64/77 25 1 Kabelabgang / Single side entry C146 10N016 500 1 C146 10N016 501 2 64/77 25 1 Geschlossen bei einem Kabelausgang 1 closed if single entry (*r+u rechts und unten / right and buttom Amphenol 77 32 77 32 2 Kabelabgange / Double side entry C146 10N016 600 1 C146 10N016 601 2 C146 10N016 700 1(*r+u C146 10N016 701 2(*r+u C146 10N016 500 2 C146 10N016 600 2 C146 10N016 700 2(*r+u Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet 139 C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 HvE C 146 EE 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 6 pol. 32 pol. Gehause fur Langsbugelverriegelung nach DIN EN 175 301 - 801 (DIN 43 652) * leichtes Bedienen auch bei seitlichem Kabelabgang * Schutzkappe am Gehauseunterteil verriegelbar * fliegende Verbindung moglich Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 21 C146 10G016 606 1 29 C146 10G016 607 1 21 C146 10G016 606 8 29 C146 10G016 607 8 21 C146 10G016 506 1 29 C146 10G016 507 1 21 C146 10G016 506 8 29 C146 10G016 507 8 Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application h 62 21 C146 10G016 804 1 62 29 C146 10G016 805 1 76 21 C146 10G016 804 8 76 29 C146 10G016 805 8 Anbaugehause 1) Housing, bulkhead mounting 1) - C146 10F016 001 1 Anbaugehause mit Deckel 1) Housing with spring cover 1) - C146 10F016 003 1 Sockelgehause Housing 1 Kabelabgang / Single side entry h 64/77 64/77 77 77 21 21 29 29 C146 10F016 802 1 C146 10F016 502 1 (*l 64 77 21 29 C146 10F016 602 1 h 64/77 64/77 77 77 21 21 29 29 C146 10F016 806 1 C146 10F016 506 1 (*l C146 10F040 803 2 C146 10F040 503 2 (*l C146 10F040 802 2 C146 10F040 502 2 (*l 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause mit Deckel Housing with spring cover C146 10F040 603 2 C146 10F040 602 2 1 Kabelabgang / Single side entry C146 10F040 807 2 C146 10F040 507 2 (*l C146 10F040 806 2 C146 10F040 506 2 (*l 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) incl. Flachdichtung / incl. gasket 140 64/77 21 29 77 C146 10F016 606 1 C146 10F040 607 2 C146 10F040 606 2 (*l links / left Amphenol housings for 1 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * also easy to use for side entry * cover for housings lockable * cable to cable possible Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 25 C146 10R016 656 1 C146 21R016 656 1 32 C146 10R016 606 1 C146 21R016 606 1 25 C146 10R016 656 8 C146 21R016 656 8 32 C146 10R016 606 8 C146 21R016 606 8 40 C146 10R016 607 8 C146 21R016 607 8 25 C146 10R016 556 1 C146 21R016 556 1 32 C146 10R016 506 1 C146 21R016 506 1 25 C146 10R016 556 8 C146 21R016 556 8 32 C146 10R016 506 8 C146 21R016 506 8 40 C146 10R016 507 8 C146 21R016 507 8 h 62 25 C146 10R016 854 1 C146 21R016 854 1 62 32 C146 10R016 804 1 C146 21R016 804 1 76 25 C146 10R016 854 8 C146 21R016 854 8 76 32 C146 10R016 804 8 C146 21R016 804 8 76 40 C146 10R016 805 8 C146 21R016 805 8 - C146 10F016 001 1 - C146 10F016 003 1 64/77 25 C146 10N016 502 1 (*l C146 10N016 503 2 (*l C146 10N016 702 1(*r+u C146 10N016 703 2(*r+u Amphenol (*r+u C146 10N016 803 2 C146 10N016 602 1 C146 10N016 603 2 77 32 C146 10N016 802 2 C146 10N016 602 2 77 32 C146 10N016 502 2 (*l C146 10N016 702 2(*r+u 77 links / left 2 Kabelabgange / Double side entry C146 10N016 802 1 64/77 25 (*l 1 Kabelabgang / Single side entry h 64/77 25 h 64/77 25 1 Geschlossen bei einem Kabelausgang 1 closed if single entry ohne Stutzen /without stud 77 32 32 rechts und unten / right and buttom 1 Kabelabgang / Single side entry C146 10N016 806 1 C146 10N016 506 1 2 Kabelabgange / Double side entry C146 10N016 807 2 (*l C146 10N016 507 2 C146 10N016 606 1 (*l C146 10N016 806 2 C146 10N016 506 2 (*r+u C146 10N016 708 1 C146 10N016 607 2 C146 10N016 709 2(*r+u C146 10N016 606 2 (*l C146 10N016 708 2(*r+u Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right outlet 141 C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 HvE C 146 EE 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 6 pol. 32 pol. Tullengehause mit Querbugel nach DIN EN 175 301 - 801 (DIN 43 652) * sichere 4-Punkt Verriegelung * Gehauseunterteil mit Schutzdeckel * keine Bugel am Gehauseunterteil Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 21 C146 10G016 602 1 29 C146 10G016 603 1 21 C146 10G016 602 8 29 C146 10G016 603 8 21 C146 10G016 502 1 29 C146 10G016 503 1 21 C146 10G016 502 8 29 C146 10G016 503 8 Gehauseunterteile / Housings Anbaugehause mit Deckel 1) Housing, with spring cover 1) - Sockelgehause, mit Deckel Housing, with spring cover h 64/77 64/77 77 77 1 Kabelabgang / Single side entry 21 21 29 29 h 64/77 21 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause Housing 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) incl. Flachdichtung / incl. gasket 142 77 C146 10F016 002 1 29 C146 10F016 804 1 C146 10F016 504 1 (*l C146 10F040 805 2 C146 10F040 505 2 (*l C146 10F040 804 2 C146 10F040 504 2 (*l 2 Kabelabgange / Double side entry C146 10F016 604 1 C146 10F040 605 2 C146 10F040 604 2 1 Kabelabgang / Single side entry h 77 21 C146 10F016 509 2 77 29 C146 10F016 508 2 2 Kabelabgange / Double side entry h 77 21 C146 10F016 609 2 77 29 C146 10F016 608 2 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right out Amphenol hoods with 2 locking-levers according to DIN EN 175 301 - 801 (DIN 43 652) * secured 4 point locking * housing with cover * no locking levers at the housings Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud 25 C146 10R016 652 1 C146 21R016 652 1 32 C146 10R016 602 1 C146 21R016 602 1 25 C146 10R016 652 8 C146 21R016 652 8 32 C146 10R016 602 8 C146 21R016 602 8 40 C146 10R016 603 8 C146 21R016 603 8 25 C146 10R016 552 1 C146 21R016 552 1 32 C146 10R016 502 1 C146 21R016 502 1 25 C146 10R016 552 8 C146 21R016 552 8 32 C146 10R016 502 8 C146 21R016 502 8 40 C146 10R016 503 8 C146 21R016 503 8 - h 64/77 25 64/77 25 77 77 ohne Stutzen /without stud C146 10F016 002 1 1 Kabelabgang / Single side entry C146 10N016 804 1 C146 10N016 504 1 2 Kabelabgange / Double side entry C146 10N016 805 2 (*l C146 10N016 505 2 C146 10N016 604 1 (*l (*r+u C146 10N016 808 1 C146 10N016 804 2 32 C146 10N016 504 2 32 C146 10N016 605 2 C146 10N016 809 2(*r+u C146 10N016 604 2 (*l C146 10N016 808 2(*r+u 1 Geschlossen bei einem Kabelausgang 1 closed if single entry h 64/77 25 77 32 1 Kabelabgang / Single side entry C146 10N016 508 1 C146 10N016 509 2 C146 10N016 508 2 2 Kabelabgange / Double side entry C146 10N016 608 1 C146 10N016 609 2 C146 10N016 608 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry (*l links / left Amphenol (*r+u rechts und unten / right and buttom 143 C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 HvE C 146 EE 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 6 pol. 32 pol. Sondergehause fur Querbugelverriegelung, nach DIN EN 175 301 - 801 (DIN 43 652) Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing special housings for 2 locking-lever system, according to DIN EN 175 301 - 801 (DIN 43 652) PG Kabelabgang Bestell Nr. / Part No. cable outlet Niedrige Bauform / Low profile Hohe Bauform / High profile 21 Oben / top C146 21G016 600 1 Seite / side C146 21G016 500 1 Gehauseoberteile / Hoods Tullengehause ohne Stutzen Hood without stud 29 Tullengehause, 2 x Abgang Oben Hood, 2 top entry Oben / top C146 21G016 601 8 Seite / side C146 21G016 501 8 21 C146 10G016 902 8 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z016 100 1 Schutzkappe fur Gehauseoberteile Cover for hoods - C146 10Z016 200 1 Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 144 Amphenol C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 HvE C 146 EE 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 6 pol. 32 pol. Gehause / Housings Bezeichnung - Abbildung Description - Figure Sondergehause fur Querbugelverriegelung, nach DIN EN 175 301 - 801 (DIN 43 652) special housings for 2 locking-lever system, according to DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M Kabelabgang Bestell Nr. / Part No. cable outlet Niedrige Bauform / Low profile Hohe Bauform / High profile 25 Oben / top C146 21R016 650 1 C146 21R016 650 8 Seite / side C146 21R016 550 1 C146 21R016 550 8 Oben / top C146 21R016 600 1 C146 21R016 600 8 Seite / side C146 21R016 500 1 C146 21R016 500 8 Gehauseoberteile / Hoods Tullengehause ohne Stutzen Hood without stud 32 40 Tullengehause, 2 x Abgang Oben Hood, 2 top entry Oben / top C146 21R016 601 8 Seite / side C146 21R016 501 8 25 C146 10R016 910 8 32 C146 10R016 902 8 Schutzkappen / Protective cover Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z016 100 1 Schutzkappe fur Gehauseoberteile Cover for hoods - C146 10Z016 200 1 Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 Amphenol 145 C 146 E C 146 M C 146 D C 146 DD C 146 HvE C 146 EE 24 pol. 7 Module 64 pol. 108 pol. 10 pol. 46 pol. Gehause fur Querbugelverriegelung nach DIN EN 175 301 - 801 (DIN 43 652) * sichere 4-Punkt Verriegelung * bevorzugt bei seitlicher Anreihung * fliegende Verbindung moglich Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 21 C146 10G024 600 1 29 C146 10G024 601 1 21 C146 10G024 600 8 29 C146 10G024 601 8 21 C146 10G024 500 1 29 C146 10G024 501 1 21 C146 10G024 500 8 29 C146 10G024 501 8 Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application h 62 21 C146 10G024 802 1 62 29 C146 10G024 803 1 76 21 C146 10G024 802 8 76 29 C146 10G024 803 8 Anbaugehause 1) Housing, bulkhead mounting 1) - Sockelgehause Housing h 64/80 21 80 C146 10F024 000 1 1 Kabelabgang / Single side entry C146 10F024 500 1 29 C146 10F064 501 2 C146 10F064 500 2 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry h 64/80 21 29 80 C146 10F024 600 1 C146 10F064 601 2 C146 10F064 600 2 Montageausschnitt fur Anbaugehause / Panel cut out for housing bulkhead mounting 1) incl. Flachdichtung / incl. gasket Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 146 Amphenol housings for 2 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * secured 4 point locking * prefered for side by side mounting * cable to cable possible Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud ohne Stutzen /without stud 25 C146 10R024 650 1 C146 21R024 650 1 32 C146 10R024 600 1 C146 21R024 600 1 25 C146 10R024 650 8 C146 21R024 650 8 32 C146 10R024 600 8 C146 21R024 600 8 40 C146 10R024 601 8 C146 21R024 601 8 25 C146 10R024 550 1 C146 21R024 550 1 32 C146 10R024 500 1 C146 21R024 500 1 25 C146 10R024 550 8 C146 21R024 550 8 32 C146 10R024 500 8 C146 21R024 500 8 40 C146 10R024 501 8 C146 21R024 501 8 h 62 25 C146 10R024 852 1 C146 21R024 852 1 62 32 C146 10R024 802 1 C146 21R024 802 1 76 25 C146 10R024 852 8 C146 21R024 852 8 76 32 C146 10R024 802 8 C146 21R024 802 8 76 40 C146 10R024 803 8 C146 21R024 803 8 C146 10F024 000 1 - h 64/80 25 1 Kabelabgang / Single side entry C146 10N024 500 1 C146 10N024 501 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry (*r+u rechts und unten / right and buttom Amphenol 32 80 32 C146 10N024 600 1 (*r+u C146 10N024 700 1 64/80 25 80 2 Kabelabgange / Double side entry C146 10N024 500 2 C146 10N024 601 2 C146 10N024 701 2(*r+u C146 10N024 600 2 C146 10N024 700 2(*r+u Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right out 147 C 146 E C 146 M C 146 D C 146 DD C 146 HvE C 146 EE 24 pol. 7 Module 64 pol. 108 pol. 10 pol. 46 pol. Gehause fur Langsbugelverriegelung nach DIN EN 175 301 - 801 (DIN 43 652) * leichtes Bedienen auch bei seitlichem Kabelabgang * Schutzkappe am Gehauseunterteil verriegelbar * fliegende Verbindung moglich Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry 21 C146 10G024 606 1 29 C146 10G024 607 1 21 C146 10G024 606 8 29 C146 10G024 607 8 21 C146 10G024 506 1 29 C146 10G024 507 1 21 C146 10G024 506 8 29 C146 10G024 507 8 Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application h 62 21 C146 10G024 804 1 62 29 C146 10G024 805 1 76 21 C146 10G024 804 8 76 29 C146 10G024 805 8 Anbaugehause 1) Housing, bulkhead mounting 1) - C146 10F024 001 1 Anbaugehause mit Deckel 1) Housing with spring cover 1) - C146 10F024 003 1 h 64/80 64/80 80 80 Sockelgehause Housing 1 Kabelabgang / Single side entry 21 21 29 29 C146 10F024 802 1 C146 10F024 502 1 (*l C146 10F064 803 2 C146 10F064 503 2 (*l C146 10F064 802 2 C146 10F064 502 2 (*l 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 64/80 21 80 29 h 64/80 64/80 80 80 Sockelgehause mit Deckel Housing with spring cover C146 10F024 602 1 C146 10F064 603 2 C146 10F064 602 2 1 Kabelabgang / Single side entry 21 21 29 29 C146 10F024 806 1 C146 10F024 506 1 (*l C146 10F064 807 2 C146 10F064 507 2 (*l C146 10F064 806 2 C146 10F064 506 2 (*l 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) incl. Flachdichtung / incl. flat gasket 148 64/80 21 80 29 C146 10F024 606 1 C146 10F064 607 2 C146 10F064 606 2 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right out Amphenol housings for 1 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * also easy to use for side entry * cover for housings lockable * cable to cable possible Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 25 C146 10R024 656 1 C146 21R024 656 1 32 C146 10R024 606 1 C146 21R024 606 1 25 C146 10R024 656 8 C146 21R024 656 8 32 C146 10R024 606 8 C146 21R024 606 8 40 C146 10R024 607 8 C146 21R024 607 8 25 C146 10R024 556 1 C146 21R024 556 1 32 C146 10R024 506 1 C146 21R024 506 1 25 C146 10R024 556 8 C146 21R024 556 8 32 C146 10R024 506 8 C146 21R024 506 8 40 C146 10R024 507 8 C146 21R024 507 8 h 62 25 C146 10R024 854 1 C146 21R024 854 1 62 32 C146 10R024 804 1 C146 21R024 804 1 76 25 C146 10R024 854 8 C146 21R024 854 8 76 32 C146 10R024 804 8 C146 21R024 804 8 76 40 C146 10R024 805 8 C146 21R024 805 8 - C146 10F024 001 1 - C146 10F024 003 1 64/80 25 C146 10N024 502 1 (*l C146 10N024 503 2 (*l C146 10N024 702 1(*r+u C146 10N024 703 2(*r+u Amphenol (*r+u C146 10N024 803 2 C146 10N024 602 1 C146 10N024 603 2 80 32 C146 10N024 802 2 C146 10N024 602 2 80 32 C146 10N024 502 2 (*l C146 10N024 702 2(*r+u 80 links / left 2 Kabelabgange / Double side entry C146 10N024 802 1 64/80 25 (*l 1 Kabelabgang / Single side entry h 64/80 25 h 64/80 25 1 Geschlossen bei einem Kabelausgang 1 closed if single entry ohne Stutzen /without stud 80 32 32 1 Kabelabgang / Single side entry C146 10N024 806 1 C146 10N024 506 1 2 Kabelabgange / Double side entry C146 10N024 807 2 (*l C146 10N024 507 2 C146 10N024 606 1 (*l C146 10N024 806 2 C146 10N024 506 2 (*r+u C146 10N024 708 1 C146 10N024 607 2 C146 10N024 709 2(*r+u C146 10N024 606 2 (*l C146 10N024 708 2(*r+u rechts und unten / right and buttom 149 C 146 E C 146 M C 146 D C 146 DD C 146 HvE C 146 EE 24 pol. 7 Module 64 pol. 108 pol. 10 pol. 46 pol. Tullengehause mit Querbugel nach DIN EN 175 301 - 801 (DIN 43 652 ) * sichere 4-Punkt Verriegelung * Gehauseunterteil mit Schutzdeckel * keine Bugel am Gehauseunterteil Gehause / Housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Hohe Bauform / High profile Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry 21 C146 10G024 602 1 29 C146 10G024 603 1 C146 10G024 602 8 21 C146 10G024 603 8 29 Tullengehause, Abgang Seite Hood, side entry 21 C146 10G024 502 1 29 C146 10G024 503 1 21 C146 10G024 502 8 29 C146 10G024 503 8 Gehauseunterteile / Housings - Anbaugehause mit Deckel 1) Housing, with spring cover 1) Sockelgehause, mit Deckel Housing, with spring cover h 64/80 64/80 80 80 C146 10F024 002 1 1 Kabelabgang / Single side entry 21 21 29 29 C146 10F024 804 1 C146 10F024 504 1 (*l C146 10F064 805 2 C146 10F064 505 2 (*l C146 10F064 804 2 C146 10F064 504 2 (*l 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Sockelgehause Housing 64/80 21 80 29 C146 10F024 604 1 C146 10F064 605 2 C146 10F064 604 2 1 Kabelabgang / Single side entry h 80 21 C146 10F024 509 2 80 29 C146 10F024 508 2 2 Kabelabgange / Double side entry 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) incl. Flachdichtung / incl. gasket 150 80 21 C146 10F024 609 2 80 29 C146 10F024 608 2 Bei Sockelgehausen Abgang rechts dargestellt / housings are shown with right out Amphenol hoods with 2 locking-levers according to DIN EN 175 301 - 801 (DIN 43 652 ) * secured 4 point locking * housing with cover * no locking levers at the housings Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile Bestell Nr. / Part No. Niedrige Bauform/ Hohe Bauform/ Low profile High profile mit Stutzen / with stud 25 C146 10R024 652 1 C146 21R024 652 1 32 C146 10R024 602 1 C146 21R024 602 1 25 C146 10R024 652 8 C146 21R024 652 8 32 C146 10R024 602 8 C146 21R024 602 8 40 C146 10R024 603 8 C146 21R024 603 8 25 C146 10R024 552 1 C146 21R024 552 1 32 C146 10R024 502 1 C146 21R024 502 1 25 C146 10R024 552 8 C146 21R024 552 8 32 C146 10R024 502 8 C146 21R024 502 8 40 C146 10R024 503 8 C146 21R024 503 8 - h 64/80 25 64/80 25 80 80 ohne Stutzen /without stud C146 10F024 002 1 1 Kabelabgang / Single side entry C146 10N024 804 1 C146 10N024 504 1 2 Kabelabgange / Double side entry C146 10N024 805 2 (*l C146 10N024 505 2 C146 10N024 604 1 (*l (*r+u C146 10N024 808 1 C146 10N024 804 2 32 C146 10N024 504 2 32 C146 10N024 605 2 C146 10N024 809 2(*r+u C146 10N024 604 2 (*l C146 10N024 808 2(*r+u 1 Geschlossen bei einem Kabelausgang 1 closed if single entry h 64/80 25 80 32 1 Kabelabgang / Single side entry C146 10N024 508 1 C146 10N024 509 2 C146 10N024 508 2 2 Kabelabgange / Double side entry C146 10N024 608 1 C146 10N024 609 2 C146 10N024 608 2 1 Geschlossen bei einem Kabelausgang 1 closed if single entry (*l links / left Amphenol (*r+u rechts und unten / right and buttom 151 C 146 E C 146 M C 146 D C 146 DD C 146 HvE C 146 EE 24 pol. 7 Module 64 pol. 108 pol. 10 pol. 46 pol. Gehause, Schutzkappen Housings, covers Bezeichnung - Abbildung Description - Figure Sondergehause fur Querbugelverriegelung, nach DIN EN 175 301 - 801 (DIN 43 652) special housings for 2 locking-lever systems, according to DIN EN 175 301 - 801 (DIN 43 652) PG-Gewinde PG-thread Mazeichnung Drawing PG Kabelabgang Bestell Nr. / Part No. cable outlet Niedrige Bauform / Low profile Hohe Bauform / High profile 21 Oben / top C146 21G024 600 1 Seite / side C146 21G024 500 1 Gehauseoberteile / Hoods Tullengehause ohne Stutzen Hood without stud 29 Tullengehause, 2 x Abgang Oben Hood, 2 top entry Oben / top C146 21G024 601 8 Seite / side C146 21G024 501 8 21 C146 10G024 903 8 29 C146 10G024 908 8 Schutzkappen / covers Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z024 100 1 Schutzkappe fur Gehauseoberteile Cover for hoods - C146 10Z024 200 1 Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 152 Amphenol C 146 E C 146 M C 146 D C 146 DD C 146 HvE C 146 EE 24 pol. 7 Module 64 pol. 108 pol. 10 pol. 46 pol. Gehause, Schutzkappen Housings, covers Bezeichnung - Abbildung Description - Figure Sondergehause fur Querbugelverriegelung, nach DIN EN 175 301 - 801 (DIN 43 652) special housings for 2 locking-lever systems, according to DIN EN 175 301 - 801 (DIN 43 652) Metrisches Gewinde Metric thread Mazeichnung Drawing M Kabelabgang Bestell Nr. / Part No. cable outlet Niedrige Bauform / Low profile Hohe Bauform / High profile 25 Oben / top C146 21R024 650 1 C146 21R024 650 8 Seite / side C146 21R024 600 1 C146 21R024 550 8 Oben / top C146 21R024 500 1 C146 21R024 600 8 Gehauseoberteile / Hoods Tullengehause ohne Stutzen Hood without stud 32 40 Tullengehause, 2 x Abgang Oben Hood, 2 top entry Seite / side C146 21R024 500 8 Oben / top C146 21R024 601 8 Seite / side C146 21R024 501 8 32/40 C146 10R024 909 8 32 C146 10R024 903 8 40 C146 10R024 908 8 Schutzkappen / covers Schutzkappe fur Gehauseunterteile Cover for housings - C146 10Z024 100 1 Schutzkappe fur Gehauseoberteile Cover for hoods - C146 10Z024 200 1 Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 Amphenol 153 C 146 HvE 16 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Gehause fur Querbugelverriegelung nach DIN EN 175 301 - 801 (DIN 43 652) housings for 2 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * mit Isolationsauskleidung * ohne Kodiersteg * with insulation inside * with removed coding element PG-Gewinde PG-thread Mazeichnung Drawing PG Bestell Nr. / Part No. Niedrige Bauform / Low profile Tullengehause, Abgang oben Hood, top entry 21 C146 10G024 600 3 Tullengehause, Abgang Seite Hood, side entry 21 C146 10G024 500 3 Kupplungsgehause Hood, coupling application 21 C146 10G024 802 3 Anbaugehause 1) Housing, bulkhead mounting 1) - C146 10F024 000 3 Gehauseoberteile / Hoods Gehauseunterteile / Housings 1 Kabelabgang / Single side entry 2 Kabelabgange / 2 side entry Sockelgehause Housing 21 C146 10F024 500 3 C146 10F024 600 3 1 Geschlossen bei einem Kabelausgang 1 closed if single entry Montageausschnitt fur Anbaugehause / Panel cut out for housing bulkhead mounting 1) incl. Flachdichtung / incl. gasket Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 154 Amphenol C 146 HvE 16 pol. Gehause Housings Bezeichnung - Abbildung Description - Figure Gehause fur Querbugelverriegelung nach DIN EN 175 301 - 801 (DIN 43 652) housings for 2 locking-lever-system according to DIN EN 175 301 - 801 (DIN 43 652) * mit Isolationsauskleidung * ohne Kodiersteg * with insulation inside * with removed coding element Metrisches Gewinde Metric thread Mazeichnung Drawing M Bestell Nr. / Part No. Niedrige Bauform / Low profile 25 C146 10R024 650 3 32 C146 10R024 600 3 25 C146 10R024 550 3 32 C146 10R024 500 3 25 C146 10R024 852 3 32 C146 10R024 802 3 - C146 10F024 000 3 Gehauseoberteile / Hoods Tullengehause, Abgang oben Hood, top entry Tullengehause, Abgang Seite Hood, side entry Gehauseunterteile / Housings Kupplungsgehause Hood, coupling application Anbaugehause 1) Housing, bulkhead mounting 1) 1 Kabelabgang / Single side entry 2 Kabelabgange / 2 side entry Sockelgehause Housing 25 C146 10N024 500 3 C146 10N024 600 3 1 Geschlossen bei einem Kabelausgang 1 closed if single entry 1) incl. Flachdichtung / incl. gasket Verschraubung fur Tullen- und Sockelgehause siehe Seite 170-173 / gland bushings for hoods and housing see page 170-173 Amphenol 155 156 Amphenol C 146 EMV Gehause/EMC Housings Fur Serien For series * C 146 E 6 - 24 pol * C 146 D 40 - 64 pol * C 146 M 2 - 7 Module * C 146 HSE 6 pol * C 146 E 6 - 24 contacts * C 146 D 40 - 64 contacts * C 146 M 2 - 7 Module * C 146 HSE 6 contacts Amphenol 157 C 146 Das uberlegene Konzept The advantage concept EMV-Gehause EMC housings * * * * * * * * leitfahige Oberflache Standard Verriegelungssystem gleiche Gehauseabmessungen wie Standard Gehause zwei Bauhohen mit und ohne Massestreifen hohe Dampfungseigenschaften Schutzart IP 65 Steckzyklen > 500 * * * * * * * * conductive surface standard locking levers same housing dimensions like standard housings two housing sizes with or without ground strap high attenuation protection class IP 65 mating cycles > 500 Massestreifen Ground strap Zentrierflansch Centering flange Standard Gehause C 146 Standard housing C 146 Version A Standardflansch, ohne Massestreifen Version A Standard flange, without ground strap Version B Standardflansch, mit Massestreifen Version B Standard flange, with ground strap Version C Zentrierflansch, mit Massestreifen Version C Centering flange, with ground strap 158 Amphenol Amphenol 159 C 146 E C 146 M C 146 DD C 146 EE 6 pol. 2 Module 24 pol. 10 pol. EMV-Gehause EMC housings Gehause fur Langsbugelverriegelung Housings for 1 locking-lever-system PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Kabelabgang Cable outlet Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile 11 13,5 13,5 16 16 Seite / side Oben / top Seite / side Oben / top Seite / side C146 11G006 556 1 C146 11G006 606 1 C146 11G006 506 1 C146 11G006 607 1 C146 11G006 507 1 21 21 29 29 Oben / top Seite / side Oben / top Seite / side Gehauseoberteile / Hoods 51 Tullengehause / Hood Gehauseunterteile / Housings Anbaugehause Housing, bulkhead mounting C146 11G006 606 8 C146 11G006 506 8 C146 11G006 607 8 C146 11G006 507 8 Version Version A + B A C146 11F006 901 8 B C146 11F006 902 8 C C146 11F006 001 8 Version C Montageausschnitt / Panel cutout O 4,5 od. M4 32,0 35,0 32,0 39,0-00,20 ,2 +0 ,0- 0 R5 O 4,5 od. M4 48 70 56 Version A + B Version C 70 EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 160 Amphenol C 146 E C 146 M C 146 DD C 146 EE 6 pol. 2 Module 24 pol. 10 pol. EMV-Gehause EMC housings Bezeichnung - Abbildung Description - Figure Gehause fur Langsbugelverriegelung Housings for 1 locking-lever-system Metrisches Gewinde Metric thread Mazeichnung Drawing M Kabelabgang Cable outlet Gehauseoberteile / Hoods 51 16 20 20 25 25 Seite / side Oben / top Seite / side Oben / top Seite / side 70 ohne Stutzen / without stud 25 25 32 32 Oben / top Seite / side Oben / top Seite / side Gehauseunterteile / Housings Anbaugehause Housing, bulkhead mounting Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile C146 11R006 556 1 C146 11R006 606 1 C146 11R006 506 1 C146 11R006 607 1 C146 11R006 507 1 C146 11R006 656 8 C146 11R006 556 8 C146 11R006 606 8 C146 11R006 506 8 Version Version A + B A C146 11F006 901 8 B C146 11F006 902 8 C C146 11F006 001 8 Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 Amphenol 161 C 146 E C 146 M C 146 DD C 146 EE Gehause fur Querbugelverriegelung Housings for 2 locking-lever-system 10 pol. 3 Module 42 pol. 18 pol. EMV-Gehause EMC housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Kabelabgang Cable outlet Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile 16 16 21 21 Oben / top Seite / side Oben / top Seite / side C146 11G010 600 1 C146 11G010 500 1 C146 11G010 601 1 C146 11G010 501 1 21 21 29 29 Oben / top Seite / side Oben / top Seite / side Gehauseoberteile / Hoods Tullengehause / Hood Gehauseunterteile / Housings C146 11G010 600 8 C146 11G010 500 8 C146 11G010 601 8 C146 11G010 501 8 Version Version A + B Anbaugehause Housing, bulkhead mounting A C146 11F010 901 8 B C146 11F010 902 8 C C146 11F010 000 8 Version C Montageausschnitt / Panel cutout O 4,5 od. M4 32,0 35,0 32,0 0 39,0-0,20 ,2 +0 ,0- 0 R5 O 4,5 od. M4 60 69 83 83 Version A + B Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 162 Amphenol C 146 E C 146 M C 146 DD C 146 EE 10 pol. 3 Module 42 pol. 18 pol. EMV-Gehause EMC housings Bezeichnung - Abbildung Description - Figure Gehause fur Querbugelverriegelung Housings for 2 locking-lever-system Metrisches Gewinde Metric thread Mazeichnung Drawing M Kabelabgang Cable outlet Gehauseoberteile / Hoods ohne Stutzen / without stud Tullengehause / Hood 20 20 25 25 32 Oben / top Seite / side Oben / top Seite / side Oben / top 25 25 32 32 40 Oben / top Seite / side Oben / top Seite / side Oben / top Gehauseunterteile / Housings Anbaugehause Housing, bulkhead mounting Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile C146 11R010 650 1 C146 11R010 550 1 C146 11R010 600 1 C146 11R010 500 1 C146 11R010 601 1 C146 11R010 650 8 C146 11R010 550 8 C146 11R010 600 8 C146 11R010 500 8 C146 11R010 601 8 Version Version A + B A C146 11F010 901 8 B C146 11F010 902 8 C C146 11F010 000 8 Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 Amphenol 163 C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 EE Gehause fur Querbugelverriegelung Housings for 2 locking-lever-system 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 32 pol. EMV-Gehause EMC housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Kabelabgang Cable outlet Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile 21 21 29 29 Oben / top Seite / side Oben / top Seite / side C146 11G016 600 1 C146 11G016 500 1 C146 11G016 601 1 C146 11G016 501 1 21 21 29 29 Oben / top Seite / side Oben / top Seite / side Gehauseoberteile / Hoods 62 Tullengehause / Hood 43 93,5 76 Pg 43 C146 11G016 600 8 C146 11G016 500 8 C146 11G016 601 8 C146 11G016 501 8 93,5 Gehauseunterteile / Housings Version Version A + B A C146 11F016 901 8 B C146 11F016 902 8 C C146 11F016 000 8 30,3 Anbaugehause Housing, bulkhead mounting 103 113 32 48 33,3 Version C C Version 103 113 32 48 Montageausschnitt / Panel cutout O 4,5 od. M4 32,0 35,0 32,0 0 39,0-0,20 ,2 +0 ,0- 0 R5 O 4,5 od. M4 82 89,5 103 103 Version A + B Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 164 Amphenol C 146 E C 146 M C 146 D C 146 DD C 146 HSE C 146 EE Gehause fur Querbugelverriegelung Housings for 2 locking-lever-system 16 pol. 5 Module 40 pol. 72 pol. 6 pol. 32 pol. EMV-Gehause EMC housings Metrisches Gewinde Metric thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing M Kabelabgang Cable outlet Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile 25 25 32 32 Oben / top Seite / side Oben / top Seite / side C146 11R016 650 1 C146 11R016 550 1 C146 11R016 600 1 C146 11R016 500 1 25 25 32 32 40 40 Oben / top Seite / side Oben / top Seite / side Oben / top Seite / side Gehauseoberteile / Hoods 62 Tullengehause / Hood 43 76 93,5 43 93,5 Gehauseunterteile / Housings C146 11R016 650 8 C146 11R016 550 8 C146 11R016 600 8 C146 11R016 500 8 C146 11R016 601 8 C146 11R016 501 8 Version Version A + B A C146 11F016 901 8 B C146 11F016 902 8 C C146 11F016 000 8 30,3 Anbaugehause Housing, bulkhead mounting 103 113 32 48 33,3 Version C C Version 103 113 32 48 Montageausschnitt / Panel cutout O 4,5 od. M4 32,0 35,0 32,0 0 39,0-0,20 ,2 +0 ,0- 0 R5 O 4,5 od. M4 82 89,5 103 103 Version A + B Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 Amphenol 165 C 146 E C 146 M C 146 D C 146 DD C 146 EE Gehause fur Querbugelverriegelung Housings for 2 locking-lever systems 24 pol. 7 Module 64 pol. 108 pol. 46 pol. EMV-Gehause EMC housings PG-Gewinde PG-thread Bezeichnung - Abbildung Description - Figure Mazeichnung Drawing PG Kabelabgang Cable outlet Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile 21 21 29 29 Oben / top Seite / side Oben / top Seite / side C146 11G024 600 1 C146 11G024 500 1 C146 11G024 601 1 C146 11G024 501 1 21 21 29 29 Oben / top Seite / side Oben / top Seite / side Gehauseoberteile / Hoods Tullengehause / Hood Gehauseunterteile / Housings C146 11G024 600 8 C146 11G024 500 8 C146 11G024 601 8 C146 11G024 501 8 Version Version A + B Anbaugehause Housing, bulkhead mounting A C146 11F024 901 8 B C146 11F024 902 8 C C146 11F024 000 8 Version C Montageausschnitt / Panel cutout O 4,5 od. M4 32,0 35,0 32,0 0 39,0-0,20 0,2 + ,0- 0 R5 O 4,5 od. M4 108 116 130 130 Version A + B Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 166 Amphenol C 146 E C 146 M C 146 D C 146 DD C 146 EE 24 pol. 7 Module 64 pol. 108 pol. 46 pol. EMV-Gehause EMC housings Bezeichnung - Abbildung Description - Figure Gehause fur Querbugelverriegelung Housings for 2 locking-lever systems Metrisches Gewinde Metric thread Mazeichnung Drawing M Kabelabgang Cable outlet Bestell Nr. / Part No. Niedrige Bauform Hohe Bauform Low profile High profile 25 25 32 32 Oben / top Seite / side Oben / top Seite / side C146 11R024 650 1 C146 11R024 550 1 C146 11R024 600 1 C146 11R024 500 1 25 25 32 32 40 40 Oben / top Seite / side Oben / top Seite / side Oben / top Seite / side Gehauseoberteile / Hoods Tullengehause / Hood Gehauseunterteile / Housings Anbaugehause Housing, bulkhead mounting C146 11R024 650 8 C146 11R024 550 8 C146 11R024 600 8 C146 11R024 500 8 C146 11R024 601 8 C146 11R024 501 8 Version Version A + B A C146 11F024 901 8 B C146 11F024 902 8 C C146 11F024 000 8 Version C EMV Verschraubung fur Tullengehause siehe Seite 173 / EMC gland bushings for hoods see page 173 Amphenol 167 168 Amphenol C 146 Zubehor / Accessories Ubersicht Overview * Verschraubungen * EMV Verschraubungen * Verschraubungen mit Zugentlastung * Codierbolzen * Fuhrungsstifte / Buchsen * D-Sub Adapterplatten * Moosgummidichtungen * Klebeschild nach CSA-Vorschrift * gland bushings * EMC gland bushings * Cable seals with cable clamp * Key pin * Guide pin / bush * D-Sub adaptors * Foam rubber sealing * Label for CSA regulation Amphenol 169 C 146 Zubehor Accessories Bezeichnung - Abbildung Description - Figure Verschraubung IP 65 1) Gland bushings IP 65 1) Zeichnung Drawing Metall, mit ausschneidbaren Dichtungen (Zwiebelringen) Metal, with variable inner diameter PG PG M M Stuckzahl Bestell Nr. Pieces Part No. 11 - 10 (Thermoplast) - 13,5 Metall, mit Standard Dichtung Metal, with standard diameter 1) VN16 110 0014 X 20 10 VN16 200 0114 X (Thermoplast) - 10 VN16 135 0014 X 16 - 10 VN16 160 0014 X - 20 10 VN16 200 0114 X 21 - 10 VN16 210 0014 X - 25 10 VN16 250 0114 X 29 - 10 VN16 290 0014 X - 32 10 VN16 320 0114 X 36 - 10 VN16 360 0014 X - 40 10 VN16 400 0114 X 42 - 10 VN16 420 0014 X - 50 10 VN16 500 0114 X 11 - 10 VN16 110 0013 X (Thermoplast) 13,5 - 10 VN16 135 0013 X 16 - 10 VN16 160 0013 X 21 - 10 VN16 210 0013 X 29 - 10 VN16 290 0013 X 36 - 10 VN16 360 0013 X 42 - 10 VN16 420 0013 X Achtung: nicht fur Gehause ohne Stutzen geeignet / Attention: not usable for hoods without stud 170 Amphenol C 146 Zubehor Accessories Bezeichnung - Abbildung Description - Figure Verschraubung IP 65 1) Gland bushings IP 65 1) Zeichnung Drawing Kabelverschraubung ohne Dichtung Cable clamp without gasket Kabelverschraubung ohne Dichtung Cable clamp without gasket Dichtung, Druckscheibe Sealing, pressure disk Ausschneidbare Dichtung, Druckscheibe Sealing with variable inner diameter, and pressure rings Zwischenstutzen Stud 1) PG M PG M Stuckzahl Bestell Nr. Pieces Part No. 11 - 5 13,5 - 16 - - 16 - 20 21 - - 25 29 - - 32 5 5 5 5 5 5 5 5 VN16 110 0004 V (Thermoplast) VN16 135 0002 V VN16 160 0102 V VN16 160 0002 V VN16 200 0102 V VN16 210 0002 V VN16 250 0102 V VN16 290 0002 V VN16 320 0102 V 13,5 - 5 VN16 135 0003 V 16 - 5 VN16 160 0003 V - 20 5 VN16 200 0103 V 21 - 5 VN16 210 0003 V - 25 5 VN16 250 0103 V 29 - 5 VN16 290 0003 V - 32 5 VN16 320 0103 V 11 - 10 VN16 110 0028 X 13,5 - 10 VN16 135 0028 X 16 - 10 VN16 160 0028 X 21 - 10 VN16 210 0028 X 29 - 10 VN16 290 0028 X 11 - 10 VN16 110 0029 X 13,5 - 10 VN16 135 0029 X 16 - 10 VN16 160 0029 X 21 - 10 VN16 210 0029 X 29 - 10 VN16 290 0029 X 11 - 1 N16 011 0010 13,5 - 1 N16 013 0010 16 - 1 N16 016 0010 21 - 1 N16 021 0010 29 - 1 N16 029 0010 Achtung: nicht fur Gehause ohne Stutzen geeignet / Attention: not usable for hoods without stud Amphenol 171 C 146 Zubehor Accessories Verschraubung IP 67 (Material PA / - 20 C + 80 C) Gland bushings IP 67 (Material PA / - 20 C + 80 C) Bezeichnung - Abbildung Description - Figure Klemmbereich O Clamping range O A mm PG PG M M Stuckzahl Bestell Nr. / Part No. Pieces Kabelverschraubung mit Vibrationsschutz Gland bushing with vibration protection 4 - 10 mm 24,4 11 - 10 VN16 110 0027 X 4 - 10 mm 20 - 16 10 VN16 160 0127 X 5 - 12 mm 26,5 13,5 - 10 VN16 135 0027 X 6 - 12 mm 24 - 20 10 VN16 200 0127 X 9 - 14 mm 29,5 16 - 10 VN16 160 0027 X 9 - 16 mm 28 - 25 10 VN16 250 0127 X 13 - 18 mm 36,2 21 - 10 VN16 210 0027 X 10 - 21 mm 36 - 32 10 VN16 320 0127 X 14 - 25 mm 43,6 29 - 10 VN16 290 0027 X 16 - 28 mm 46 - 40 10 VN16 400 0127 X Blindstopfen aus Messing vernickelt mit Einstich und O-Ring Plugs brass nickel-plated with recess and o-ring 172 M 20 10 VN16 020 0113 (1) X M 25 10 VN16 025 0113 (1) X M 32 10 VN16 032 0113 (1) X M 40 10 VN16 040 0113 (1) X Amphenol C 146 Zubehor Accessories EMV Verschraubung IP 68 (Material CuZn / PA / - 30 C + 120 C) EMC gland bushings IP 68 (Material CuZn / PA / - 30 C + 120 C) Bezeichnung - Abbildung Description - Figure Klemmbereich F Clamping range F PG PG M M Stuckzahl Pieces Bestell Nr. Part No. Kabelverschraubung EMV Gland bushing EMC 4 - 10 mm 11 - 10 VN16 110 0026 X 5,5 - 10 mm - 16 10 VN16 160 0126 X 5 - 12 mm 13,5 - 10 VN16 135 0026 X 8 - 13 mm - 20 10 VN16 200 0126 X 8 - 14 mm 16 - 10 VN16 160 0026 X 11 - 18 mm - 25 10 VN16 250 0126 X 11 - 17,5 mm 21 - 10 VN16 210 0026 X 15 - 21 mm - 32 10 VN16 320 0126 X 16 - 25 mm 29 - 10 VN16 290 0026 X 19 - 27 mm - 40 10 VN16 400 0126 X Montagehinweise fur metrische Verschraubung / Assembly instructions for metric clamp * Der Auenmantel des Kabels wird entfernt bis * The cable jacket should be removed as far as the Unterseite Lamellen-Klemmkafig, das Drahtgeflecht underside of the cable clamping; the wire netting is wird erst ein Stuck weiter unten abgeschnitten und then to be cut down a little further and subsequently dann als ringformiger Wulst ausgebildet. Der innere must be formed into a circular rim. The protective Schutzmantel kann am Kabel dranbleiben, sofern er jacket can remain attached to the cable provided that durch die untere Offnung der Verschraubung passt. it passes through the lower opening of the clamp. * Bei der Montage, beim Zusammenschrauben der * On assembly, while screwing the cable clamp, the Kabelverschraubung wird der ringformige Wulst circular rim has to be pushed through and pressed durch die Lamellentulle auf den Boden des Unterteils on the fins commutator on the base of the verpresst und findet in einer Auskofferung Platz. underside and settle into a depression. By doing Dadurch wird die EMV-Sicherheit hergestellt. this the EMC security will remain. Montagehinweise fur PG-Verschraubung / Assembly instructions for PG-Clamp * Auenmantel und Schirm absetzen * Auenmantel nach ca. 15 mm mit Rundschnitt versehen, jedoch nicht abziehen * Leitung durch die Verschraubung fuhren * Auenmantel abziehen * Leitung zuruckziehen bis die Verbindung zwischen Leitungsschirm und Kontaktfeder hergestellt ist * Cut and remove cable jacket and braid * Cut cable jacket appr. 15 mm further but don't remove it yet * Insert cable through backshell * Remove now the cut jacket part * Pull back cable until connection is made between grounding fingers and braid * Auenmantel absetzen * Schirmgeflecht ca. 15 - 20 mm uber den Auenmantel zuruckschlagen * Leitungen in Verschraubung einfuhren, bis Verbindung zwischen Leitungsschirm und Kontaktfeder hergestellt ist * Cut and remove cable jacket * Fold braid appr. 15 to 20 mm back over jacket * Insert cable into backshell until grounding fingers connect with braid * Schirmgeflecht ca. 10 mm freilegen * Leitung durch die Verschraubung fuhren bis Verbindung zwischen Leitungsschirm und Kontaktfeder hergestellt ist * Expose braid appr. 10 mm * Insert cable through backshell until grounding fingers rest on braid 1 = Zwischenstutzen 2 = Hutmutter 3 = Dichtung 4 = 0-Ringe 5 = Einsatz 6 = Erdungsfinger Amphenol 1 = Screwed gland 2 = Cap nut 3 = Sealing 4 = 0 ring 5 = Insert 6 = Grounding finger 173 C 146 Zubehor Accessories Bezeichnung - Abbildung Description - Figure Zeichnung Drawing Stuckzahl Bestell Nr. Pieces Part No. Kodierbolzen mit Sicherungsscheibe Key pin with lock washer 10 VN17 050 0004 (1) 100 VN17 050 0004 (101) Fuhrungsstift Guide pin 10 VN13 040 0009 (1) X Fuhrungsbuchse Guide socket 10 VN13 040 0008 (1) X L 23 20 VN03 030 0021 20 20 VN03 030 0020 10 VN03 030 3000 X Verrieglungsschraube fur Kontakteinsatze Locking screw for contact inserts C146 D 15, 25 C146 A 10, 16 Verriegelungsschraube fur Kontakteinsatze Locking screw for contact inserts C146 E; M; D 40, 64; H Verriegelungsset Locking set C146 E; M; D 40, 64; H M3 174 Amphenol C 146 Zubehor Accessories Kodierschema Polarization system Bezeichnung Description Kodierschema mit Kodierbolzen Fur Gehause mit einem Kontakteinsatz For housings with one contact insert Polarization system with key pin Fur Gehause mit zwei Kontakteinsatzen For housings with two contact inserts Kodierbolzen Befestigungsschrauben M - Stifteinsatz F - Buchseneinsatz Kodierschema mit Fuhrungsstift und Fuhrungsbuchse Key pin Locking screw M - Male insert F - Female insert Fur Gehause mit einem Kontakteinsatz For housings with one contact insert Polarization system with guide pin and guide socket Fur Gehause mit zwei Kontakteinsatzen For housings with two contact inserts Fuhrungsstift Fuhrungsbuchse + Befestigungsschrauben M - Stifteinsatz F - Buchseneinsatz Amphenol Guide pin Guide socket + Locking screw M - Male insert F - Female insert 175 C 146 Zubehor Accessories Bezeichnung - Abbildung Description - Figure Zeichnung Drawing Moosgummidichtung 2 mm Foam rubber sealing 2 mm Adapterplatte D-Sub Set Metall Adaptor for D-Sub Set metal Groe Size Bestell Nr. Part No. a 80 b 70 6 N06 080 0003 1 93 83 10 N06 080 0003 2 113 103 16 N06 080 0003 3 140 130 24 N06 080 0003 4 a 57 b 49,5 D-Sub 15 15 C146 N32 015 G2 57 49,5 25 25 C146 N32 025 G2 a 51,5 51,5 b 44 44 D-Sub 9 15 6 C146 N32 009 G1 6 C146 N32 015 G1 64,5 57 25 10 C146 N32 025 G1 85 77,5 37 16 C146 N32 037 G1 85 77,5 50 16 C146 N32 050 G1 a 51,5 51,5 b 44 44 D-Sub 9 15 6 C146 N33 009 G1 6 C146 N33 015 G1 64,5 57 25 10 C146 N33 025 G1 85 77,5 37 16 C146 N33 037 G1 85 77,5 50 16 C146 N33 050 G1 50 Stuck Pieces N07 045 0001 L 2 x Platte / adaptor 4 x M3 x 6,5 8 x M3 x 14 Adapterplatte D-Sub Set einreihig Adaptor for D-Sub set single-row 2 x Platte / adaptor 4 x M3 x 6,5 8 x M3 x 14 Adapterplatte D-Sub Set zweireihig Adaptor for D-Sub set double-row 2 x Platte / adaptor 4 x M3 x 6,5 8 x M3 x 14 Hinweisschild fur CSA-Anwendung Label for CSA application 176 Amphenol C 146 Mazeichnungen Kontakte Drawings contacts Serie Series C146 D, M C146 E, M C146 M 1) Gestanzte Crimpkontakte Stamped crimp contacts Mazeichnung Einzelkontakt Drawing single contact Mazeichnung Bandkontakt Drawing contacts on reel .N01 016 0003 1 .N02 016 0003 1 .N01 016 0002 1 .N01 016 0015 11) .N02 016 0002 1 .N02 016 0015 11) .N01 016 0005 1 .N01 016 0016 11) .N02 016 0005 1 .N02 016 0016 11) .N01 025 0001 1 .N02 025 0001 1 .N01 025 0010 1 .N02 025 0010 1 .N01 025 0043 1 .N02 025 0043 1 .N01 010 0130 2 .N02 010 0130 2 .N01 010 0131 2 .N02 010 0131 2 gekennzeichnet mit H" / marked with H" Amphenol 177 C 146 Mazeichnungen Kontakte Drawings contacts Gedrehte Crimpkontakte Turned crimp contacts Serie Series Mazeichnung Drawing Querschnitt A Wire gauge B Stuckzahl Pieces Bestell Nr. Part No. C146 D, DD, M .N01 016 002X 0,14 - 0,37 0,9 2,6 100 VN01 016 0024 (1)C 0,5 1,1 2,6 100 VN01 016 0025 (1)C 0,75 - 1,0 1,45 2,6 100 VN01 016 0026 (1)C 1,5 1,75 3,0 100 VN01 016 0027 (1)C 2,5 2,25 3,2 100 VN01 016 0028 (1)C 0,14 - 0,37 0,9 2,6 100 VN02 016 0024 (1)C 0,5 1,1 2,6 100 VN02 016 0025 (1)C 0,75 - 1,0 1,45 2,6 100 VN02 016 0026 (1)C 1,5 1,75 3,0 100 VN02 016 0027 (1)C 2,5 2,25 3,2 100 VN02 016 0028 (1)C 0,5 1,1 2,6 100 VN01 025 0035 (1)C 0,75 - 1,0 1,45 2,6 100 VN01 025 0036 (1)C 1,5 1,75 3,0 100 VN01 025 0037 (1)C 2,5 2,3 3,2 100 VN01 025 0038 (1)C 4,0 2,9 4,0 100 VN01 025 0039 (1)C 0,5 1,1 2,6 100 VN02 025 0035 (1)C 0,75 - 1,0 1,45 2,6 100 VN02 025 0036 (1)C 1,5 1,75 3,0 100 VN02 025 0037 (1)C 2,5 2,3 3,2 100 VN02 025 0038 (1)C 4,0 2,9 4,0 100 VN02 025 0039 (1)C 0,5 1,1 2,6 100 VN01 025 0029 (1)C 0,75 - 1,0 1,45 2,6 100 VN01 025 0030 (1)C 1,5 1,75 3,0 100 VN01 025 0031 (1)C 2,5 2,25 3,45 100 VN01 025 0032 (1)C 4,0 2,85 3,9 100 VN01 025 0033 (1)C 0,5 1,1 2,6 100 VN02 025 0029 (1)C 0,75 - 1,0 1,45 2,6 100 VN02 025 0030 (1)C 1,5 1,75 3,0 100 VN02 025 0031 (1)C 2,5 2,25 3,45 100 VN02 025 0032 (1)C 4,0 2,85 3,9 100 VN02 025 0033 (1)C 1,5 1,75 3,0 100 VN01 036 0004 (1)C 2,5 2,25 3,45 100 VN01 036 0005 (1)C 4,0 2,85 3,9 100 VN01 036 0001 (1)C 6,0 3,55 4,9 100 VN01 036 0002 (1)C 10,0 4,4 5,9 100 VN01 036 0003 (1)C 1,5 1,75 3,0 100 VN02 036 0004 (1)C 2,5 2,25 3,45 100 VN02 036 0005 (1)C 4,0 2,85 3,9 100 VN02 036 0001 (1)C 6,0 3,55 4,9 100 VN02 036 0002 (1)C 10,0 4,4 5,9 100 VN02 036 0003 (1)C .N02 016 002X C146 E, EE .N01 025 003X .N02 025 003X C146 M .N01 025 00XX .N02 025 00XX .N01 036 000X .N02 036 000X 178 Amphenol C 146 Mazeichnungen Kontakte Drawings contacts Serie Series C146 M LWL LWL Kontakte, Koax Kontakte FO contacts, coax contacts Mazeichnung Einzelkontakt Drawing single contact Bestell Nr. Part No. N01 016 0040 8 C146 M FO N02 016 0040 8 C146 M Koax 17 DM 537 421 C146 M Coax 17 DM 537 401 17 DM 537 425 17 DM 537 405 Amphenol 179 180 Amphenol C 146 Wiederanschliebar rewirable X Steckverbinder mit Schaltleistung 1) Connetor with breaking capacity 1) Fingersicherheit ungesteckt finger safety unmated Fingersicherheit gesteckt finger safety mated Zugentastung cable clamp Schutzleiter protective earthing contact X X Handruckensicherheit gesteckt hand back safety mated Tullengehause mit Stifteinsatz ungekapselt unenclosed Ausfuhrung Style nach DIN EN 61984 (VDE 0627) according to DIN EN 61984 (VDE 0627) gekapselt enclosed Einteilung Classification Zugentlastung Cable clamp mit 2) ohne 3) with without X X X X X X X 4) X X X X X X X 4) X X X X X X X X X X X X X X X X X X X X Hood with pin insert X Stifteinsatz X Pin insert Tullengehause mit Buchseneinsatz X X X X X Hood with socket insert Buchseneinsatz X X socket insert Kupplungsgehause mit Stifteinsatz X X X X X X X X X X X X Coupling housing with pin insert Kupplungsgehause mit Buchseneinsatz X Coupling housing with socket insert Anbau-Sockelgehause mit Stifteinsatz Housing with pin insert Anbau-Sockelgehause mit Buchseneinsatz X Housing with socket insert 1) 2) 3) 4) Bei Verwendung als Steckverbinder mit Schaltleistung ist der Strom zu begrenzen / When used as connector with braking capacity the load shall be reduced Bei Verwendung von Kabelverschraubungen (siehe Seite 169) / When using cable seals (see page 169) Bei Standard Verschraubung / When using standard gland bushings siehe Einzelangaben / see detail information Sofern nicht anders angegeben, sind zur Sicherstellung der Schutzleiterfunktion die Kontakteinsatze in metallisch leitende Gehause einzubauen, bzw. auf Schienen oder Montageplatten zu montieren. If not otherwise stated the contact inserts have to be mounted in metallic conductive housings resp. on bars or mounting boards to complete the protective earth grounding. Amphenol 181 C 146 Technische Informationen Technical information Allgemeine technische Informationen General technical information Hinweise: * Die Sicherheit von Steckverbindern/Steckverbinder mit Schaltleistung (Steckvorrichtung) ist abhangig von der richtigen Auswahl der Produkte, dem ordungsgemaen Einbau und der sachgemaen Montage. Remarks: * The Safty of connectors/connectors with braking capacity (CBC) depends on the right selection of products, the correct installation and a proper assembly. * Verbindlich fur den Einsatz von Steckverbindern sind die jeweiligen Anforderungen der Geratevorschriften. Dies gilt insbesondere fur die Festlegung der Bemessungsspannung und der damit zusammenhangenden Luft- und Kriechstrecken. * Decisions for the application of connectors are the requirements of the equipment specifications. This is especially the case for the definition of the rated voltage and the related clearances and creepage distances. * Alle Angaben der Bemessungsdaten der in diesem Katalog aufgefuhrten Steckverbindern sind auf die Uberspannungskategorie III sowie den Verschmutzungsgrad 3 (Anwendung im Maschinenbau) bezogen. * Alle technischen Angaben beziehen sich auf Steckverbinder, also Betriebsmittel, die bei bestimmungsgemaer Verwendung (unter elektrischer Spannung) nicht gesteckt oder getrennt werden durfen. Soweit Steckverbinder im Sinne von Steckvorrichtungen (Steckverbinder mit Schaltleistung) verwendet werden, ist dies in der Kurzinformation der betreffenden Abschnitte aufgefuhrt. * Der Beruhrungsschutz der Kontakteinsatze im Anschlussbereich ist durch den Einbau sicherzustellen. * All rated data for the connectors listed in this catalogue is based on overvoltage category III and pollution degree 3 (machine tool application). * All technical data is specified for connectors, which are not under load when mated or disconnected. If in special cases connectors can be used in the sense of plug and socket devices (connector with breaking capacity), this is mentioned in the brief information of the particular section. * Correct mounting will protect against electrical shock when mating the connectors. * It connectors are mounted in non conductive housings both protective earthing terminals shall be mounted. * Beim Einbau der Steckverbinder in nicht leitende Gehause sind beide Schutzleiter (Ausfuhrung 2x PE) anzuschlieen. * A detailed connector glossary can be found at the end of this catalogue. * Ein ausfuhrliches Kompendium von Steckverbinder-Begriffen befindet sich am Ende dieses Kapitels. * All mentioned excerpts of standards are for general information only. For specific cases the valid original standards have to be consulted. * Nachstehend aufgefuhrte Auszuge aus Normen dienen der allgemeinen Information. Im konkreten Anwendungsfall sind die jeweils gultigen Normen anzuwenden. * Test methods acc. IEC 60512 camply with test methods acc. DIN EN 60512 or DIN IEC 60512. IEC 60664-1 complies with DIN VDE 0110-1 * Prufverfahren nach IEC 60512 entsprechen den Prufverfahren nach DIN EN 60512 oder DIN IEC 60512. Die DIN IEC 60664-1 entspricht DIN VDE 0110-1 Anschlusstechniken * Schraubverbindung Schraubklemmen werden nach EN 60999-1/VDE 0609 bemessen. Die Gewindegroe in Abhangigkeit vom Leiterquerschnitt sowie das dazugehorige Anzugs- und Prufdrehmoment konnen untenstehender Tabelle 1 entnommen werden. Termination methods * Screw connection Screw clamps are designed acc. to EN 60999-1/VDE 0609. Chart 1 below shows the screw size depending on wire size and the required clamping and testing torque. Tabelle 1 Chart 1 2 Leiterquerschnitt (mm ) 1 Schraubengewinde Wire size (mm2) 1 1,5 2,5 4 M 3,5 M 4 M4 Screw size M 2,6 M 3 M3 M 3,5 M 4 M4 80 120 Test torque (Ncm) 40 50 80 120 2,5 4 M 2,6 M 3 M3 50 120 50 6 120 10 Die Ausziehkrafte (Streubereich) der Leiter aus einer Schraubverbindung eines Kontaktelementes zeigt das untenstehende Diagramm 1 fur eine Klemmschraube M 3, angezogen mit einem Drehmoment von 50 Ncm. Diagram 1 below shows the range of tensile strength for a screw connection with a clamp screw M3, fastened with a torque of 50 Ncm, depending on the wire size. Diagramm 1 Diagram 1 Tensile strength 50 6 Ausziehkraft Prufdrehmoment (Ncm) 40 Leiterquerschnitt 182 10 1,5 Wire gauge Amphenol C 146 Technische Informationen Technical information * Crimpverbindung Eine Crimpverbindung ist eine nicht losbare elektrische Verbindung zwischen einem Leiter und einem Crimpkontakt mit Hilfe der Crimptechnik. Durch genau auf Crimphulse und Leiterquerschnitt abgestimmte Crimpprofile werden durch Druck und gezielte Verformung zuverlassige elektrische Verbindungen hergestellt. Es gibt offene Crimphulsen (gestanzte Kontakte) und geschlossene Crimphulsen (gedrehte Kontakte). Die wesentlichen Vorteile von Crimpverbindungen sind: * Rationelle Verarbeitung der Kontakte * Konstante elektrische und mechanische Werte durch gleichbleibende Crimpqualitat. (Eine ausfuhrliche Beschreibung der Crimptechnologie finden Sie in unserem Katalog Werkzeuge".) * Crimp connection A crimp connection is a non-detachable electrical connection between a wire and a crimp contact produced with the crimp technology. Precise crimping dies are matched to the crimp barrel and the wire size and a defined deformation results in a reliable electrical connection. There are open barrels (stamped contacts) and closed crimp barrels (turned contacts). The main advantages of crimp connections are: * Efficient termination of contacts. * Reproduceable electrical and mechanical figures by a constant crimp quality. (A detailed description of the crimp technology can be found in our catalogue tools"). Die Anforderungen an Crimpverbindungen sind in der DIN EN 60352-2, festgelegt. The requirements for crimp connections are defined in DIN EN 60352-2. Ein wesentliches Merkmal fur die Qualitat einer Crimpverbindung ist die erreichte Zugfestigkeit des Anschlusses. Sie kann mit einfachen Mitteln zur Uberwachung der Qualitat herangezogen werden. Aus untenstehender Tabelle 2 kann die Mindest-Zugfestigkeit entnommen werden. An important point for the quality of a crimp connection is the achieved tensile strength of the termination. Measuring the tensile strength is a practible means for quality control purposes. Chart 2 below shows the required minimum tensile strength for open and closed barrels according to the wire size. Tabelle 2 Chart 2 Zugfestigkeit von Crimpverbindungen Tensile strength for crimp connetions Leiterquerschnitt 2 Zugfestigkeit N mm 6 0,05 30 6 0,08 28 11 0,08 28 11 0,12 26 15 0,12 26 15 18 0,14 28 0,22 0,22 24 0,25 AWG N 18 24 28 32 0,25 0,32 22 40 0,32 22 40 0,5 20 60 0,5 20 60 85 0,75 0,75 0,82 18 1,0 1,3 16 1,5 2,1 14 2,5 3,3 12 4,0 5,3 10 6,0 8,4 10,0 Nur zur Information Amphenol Tensile strenght 1) 30 0,14 1) Wire size 2 0,05 mm AWG 1) 8 90 0,82 108 1,0 135 1,3 150 1,5 200 2,1 230 2,5 275 3,3 310 4,0 355 5,3 360 6,0 370 8,4 380 10,0 1) 32 85 18 90 108 16 135 150 14 200 230 12 275 310 10 355 360 8 370 380 only for information 183 C 146 Technische Informationen Technical information Da in verschiedenen Bereichen der Industrie auch mit Leitern nach der amerikanischen Drahtlehre AWG (American Wire Gauge) gearbeitet wird, folgt hiernach Tabelle 3 zur Umrechnung von AWG in mm2. The chart below allows a cross reference between American Wire Gauge (AWG) and metric wire sizes (mm2). Tabelle 3 Chart 3 AWG Leiteraufbau Leiter-O Leiterquerschnitt AWG Wire composition Wire diameter Wire size 30 1 x 0,25 7 x 0,10 0,25 mm 0,36 mm 0,05 mm2 0,06 mm2 30 28 1 x 0,32 7 x 0,13 1 x 0,40 7 x 0,16 19 x 0,10 1 x 0,51 7 x 0,20 19 x 0,13 1 x 0,64 7 x 0,25 19 x 0,16 1 x 0,81 7 x 0,32 19 x 0,20 1 x 1,02 19 x 0,25 19 x 0,29 0,32 mm 0,38 mm 0,40 mm 0,48 mm 0,51 mm 0,51 mm 0,61 mm 0,64 mm 0,64 mm 0,76 mm 0,81 mm 0,81 mm 0,97 mm 1,02 mm 1,02 mm 1,27 mm 1,44 mm 0,08 mm2 0,09 mm2 0,13 mm2 0,14 mm2 0,15 mm2 0,21 mm2 0,23 mm2 0,24 mm2 0,33 mm2 0,36 mm2 0,38 mm2 0,52 mm2 0,56 mm2 0,62 mm2 0,79 mm2 0,96 mm2 1,23 mm2 28 16 1 x 0,25 7 x 0,10 1 x 0,32 7 x 0,13 1 x 0,40 7 x 0,16 19 x 0,10 1 x 0,51 7 x 0,20 19 x 0,13 1 x 0,64 7 x 0,25 19 x 0,16 1 x 0,81 7 x 0,32 19 x 0,20 1 x 1,02 19 x 0,25 19 x 0,29 0,25 mm 0,36 mm 0,32 mm 0,38 mm 0,40 mm 0,48 mm 0,51 mm 0,51 mm 0,61 mm 0,64 mm 0,64 mm 0,76 mm 0,81 mm 0,81 mm 0,97 mm 1,02 mm 1,02 mm 1,27 mm 1,44 mm 0,05 mm2 0,06 mm2 0,08 mm2 0,09 mm2 0,13 mm2 0,14 mm2 0,15 mm2 0,21 mm2 0,23 mm2 0,24 mm2 0,33 mm2 0,36 mm2 0,38 mm2 0,52 mm2 0,56 mm2 0,62 mm2 0,79 mm2 0,96 mm2 1,23 mm2 2 14 19 x 0,36 1,80 mm 1,95 mm2 26 24 22 20 18 16 24 22 20 18 14 19 x 0,36 1,80 mm 1,95 mm 12 19 x 0,46 2,29 mm 3,09 mm2 12 19 x 0,46 2,29 mm 3,09 mm2 2 10 37 x 0,40 3,10 mm 4,60 mm2 8 6 133 x 0,29 133 x 0,36 4,0 mm 5,5 mm 8,80 mm2 13,5 mm2 10 37 x 0,40 3,10 mm 4,60 mm 8 133 x 0,29 4,0 mm 8,80 mm2 5,5 mm 2 6 133 x 0,36 13,5 mm Zu beachten ist, dass Leiter mit gleicher AWG-Nummer, aber unterschiedlichem Aufbau, leicht unterschiedliche Querschnitte aufweisen! It has to be noted that wires of the same AWG number but with different composition have slightly different mm2. Tabelle 4 Aufbau und Abmessungen von Kupferleitungen Chart 4 Composition and Dimensions of Copper Wires Leiterquerschnitt Leiteraufbau 2 12 x 0,10 0,14 mm2 18 x 0,10 0,09 mm 0,25 mm 2 0,34 mm 2 14 x 0,15 Leiter-O Wire Size Wire Composition Wire diameter 0,48 mm 0,09 mm 2 12 x 0,10 0,48 mm 0,50 mm 0,14 mm2 18 x 0,10 0,50 mm 0,70 mm 0,25 mm 2 14 x 0,15 0,70 mm 2 7 x 0,25 0,78 mm 0,34 mm 0,5 mm2 16 x 0,20 1,0 mm 0,5 mm2 0,75 mm2 7 x 0,25 0,78 mm 16 x 0,20 1,0 mm 24 x 0,20 1,2 mm 0,75 mm2 24 x 0,20 1,2 mm 2 32 x 0,20 1,4 mm 1,0 mm2 32 x 0,20 1,4 mm 1,5 mm2 30 x 0,25 1,6 mm 1,5 mm2 30 x 0,25 1,6 mm 2,5 mm2 35 x 0,30 2,2 mm 2,5 mm2 35 x 0,30 2,2 mm 2 56 x 0,30 2,8 mm 19 x 0,64 3,4 mm 19 x 0,80 4,3 mm 1,0 mm 2 56 x 0,30 2,8 mm 4,0 mm 6,0 mm2 19 x 0,64 3,4 mm 6,0 mm2 4,0 mm 10 mm 184 26 2 19 x 0,80 4,3 mm 10 mm 2 Amphenol C 146 Technische Informationen Technical information Strombelastbarkeit Current carrying capacity Die Strombelastbarkeit eines Steckverbinders wird mit einer DeratingKurve dargestellt. Aus ihr kann abgelesen werden, welche Strome dauernd und gleichzeitig uber alle Kontakte flieen durfen. Die Kurve wird durch Prufung ermittelt. Als Basis dient dazu die Norm DIN EN 60512. Die obere Grenztemperatur wird durch die verwendeten Kontaktund Isolierwerkstoffe bestimmt. Die Summe aus der Umgebungstemperatur und der durch die Strombelastung hervorgerufenen Ubertemperatur darf die obere Grenztemperatur des Steckverbinders nicht ubersteigen. Somit ist die Strombelastbarkeit kein konstanter Wert, sondern sinkt mit steigender Umgebungstemperatur. Als allgemeines Beispiel sei gesagt, dass bei einem vorgegebenen Steckverbinder, der bei einer Umgebungstemperatur von 40C mit einem Dauerstrom von 16A auf allen Kontakten belastet werden darf, dieser Wert bei einer Umgebungstemperatur von 80C auf z.B. 12A sinken kann. Auf der anderen Seite ist es in der Praxis sehr oft der Fall, dass nicht alle Anschlusse gleichzeitig mit dem maximal zulassigen Strom belastet werden, so dass dann einzelne Kontakte mit einem hoheren Strom als nach der Derating-Kurve zulassig, beaufschlagt werden konnen. Diese Grenzwerte sind durch Prufung zu ermitteln. Durch die Werkstoffe gegebene obere Grenztemperatur Diagramm 3 The current carrying capacity of a connector is shown by a derating curve. The curve shows the currents that the connector can carry continuously and simultaneously through all its contacts. The curve is determined by testing following the standard DIN EN 60512. The upper temperature is limited by the contact and insulation material used . The sum of the ambient temperature and the temperature created by the current flow may not exceed the upper temperature. This means that the current carrying capacity has no fixed value but decreases with increasing ambient temperatures. As a general example it can be said that a given connector which can carry 16A through all its contacts at 40C ambient temperature can carry less, e.g. 12A, at an ambient temperature of 80C. On the other hand it is often the case that not all contacts carry the whole rated current, which means that some single contacts may carry a higher current than that according to the derating curve. These currents have to be defined by testing. Umgebungstemperatur Typische Derating-Kurve Ambient temperature (C) Typical derating curve Tabelle 5 Chart 5 Strombelastbarkeit von Kupferleitern in (A) Installationsart Installation type Upper temperature limited by the connector materials Current carrying capacity Strombelastbarkeit Diagram 3 Current carrying capacity of copper wires in (A) 2 Querschnitt (mm ) Wire size (mm2) 0,25 0,34 0,5 0,75 1 1,5 2,5 4 6 10 - - - 7,6 10,4 13,5 18,3 25 32 44 - - - - 9,6 12 16,5 23 29 40 C Kabel und Leitungen an Wanden Cables and conductors along walls 4,0 5,0 7,1 9,1 11,7 15,2 21 28 36 50 E Kabel und Leitungen auf Kabelpritschen Cables and conductors on plank 4,0 5,0 7,1 9,1 11,5 16,1 22 30 37 52 B1 Leiter in Schutzrohren und Installationskanalen Wires in conduits and installation channels B2 Kabel und Leitungen in Schutzrohren oder Installationskanalen Cables and conductors in conduits or installation channels Darstellung in Anlehnung an DIN EN 60204 fur PVC-isolierte Kupferleiter in einer Umgebungstemperatur von +40C unter Dauerbetriebsbedingungen. Fur abweichende Bedingungen wie andere Temperaturen, Installationen, Isoliermaterialien oder Leitern sind entsprechende Korrekturfaktoren zu verwenden (siehe nachste Seite). Amphenol Description according to DIN EN 60204 for PVC insulated copper wires with a working temperature of +40C. For other requirements, such as for other temperatures, mountings, or wires corresponding correction factors are used (see next page). 185 C 146 Technische Informationen Technical information Reduktionsfaktoren Reduction values Die Werte in der Tabelle 5 beziehen sich auf eine Umgebungstemperatur von 40C. Fur andere Umgebungstemperaturen muss der Wert mit den Faktoren aus der folgenden Tabelle 6 korrigiert werden. The values in chart 5 are based on an ambient temperature of 40 C. For other ambient temperatures the values have to be adjusted using the correction values of chart 6 below. Tabelle 6 Chart 6 Umgebungstemperatur (C) Korrekturfaktor Ambient temperature (C) Correction value 30 1,15 30 1,15 35 1,03 35 1,03 40 1,00 40 1,00 45 0,91 45 0,91 50 0,82 50 0,82 55 0,71 55 0,71 60 0,58 60 0,58 Fur Installationen mit vielen belasteten Kabeln und Leitungen/Paaren verringern sich die Werte der Strombelastbarkeit entsprechend den nachfolgenden Tabellen 7 und 8. For installations with many cables and conductors under load the current carrying capacity is reduced according to the two following charts 7 and 8. Tabelle 7 Chart 7 Reduktionsfaktoren fur Leitungsanhaufung Reduction values for accumulated conductors Art der Installation Installation type Anzahl der belasteten Kabel und Leitungen / Paare Number of cables and conductors / pairs under load 2 4 6 9 Drehstromkabel und -leitung Threephase cable and conductor B1 und/and B2 C E-einlagig / one row E-mehrlagig / multi row 0,80 0,65 0,57 0,50 0,85 0,75 0,72 0,70 0,87 0,78 0,75 0,73 0,86 0,76 0,72 0,88 Gleichstromleitung (Paar), unabhangig von der Installationsart DC conductor (pair), independent of installation type 1,0 0,76 0,64 0,43 Tabelle 8 Chart 8 Reduktionsfaktoren fur Mehraderkabel (-leitungen) bis zu 10 mm2 Reduction values for multicore cable and conductors up to 10mm2 Anzahl der belasteten Leitungen (Paare) Number of conductors (pairs) under load Wechselstrom (Leiter >1 mm2) AC (conductor > 1 mm2) Gleichstrom (Paare 0,2 bis 0,75 mm2) DC (Pairs 0,2 to 0,75 mm2) 5 0,75 0,52 7 0,65 0,45 10 0,55 0,39 24 0,40 0,27 Leiter von Steuerkreisen benotigen normalerweise keine Herabsetzung. 186 Conductors of control circuits generally do not need a reduction. Amphenol C 146 Technische Informationen Technical information Stostrombelastbarkeit Impulse current carrying capacity Eine besondere Belastung kann sich fur Steckverbinder und deren Kontakte durch einen Stostrom ergeben, der z.B. durch einen Kurzschluss in der Anlage oder durch Schaltvorgange entstehen kann. Die kurzzeitig sehr hohe Stromerwarmung kann nach auen nicht schnell genug abgefuhrt werden, so dass es zu einer ortlich sehr starken Erwarmung der Kontakte kommt, die z.B. in extremen Fallen zu einer Verschweissung fuhren kann. Durch unsere robuste Kontaktkonstruktion sind die hier beschriebenen Steckverbinder gegenuber Stostromen relativ unempfindlich. Richtwerte konnen dem nachfolgenden Diagramm 4 entnommen werden. A surge can happen to a connector and its contacts by an impulse current, e.g. through a short circuit in the system or by switching operations. The short-timed high current heat cannot be transferred outside fast enough so the contacts are stressed by the high temperature which in the worst case can lead to a local weld. The robust design of our connectors prevents most damage by impulse currents. Diagramm 4 Diagramm 4 Stostrombelastbarkeit von Einzelkontakten Impulse current carrying capacity of single contacts Stostrom (A) Impulse current (A) The diagram 4 below can be used as a guideline. Impulsdauer (S) Impulse time (S) Kurve Nr. Steckverbinder-Bauform Curve No. Connector style 1 C146 E oder A mit Schraubkontakt 1 C146 E or A with screw contact 2 C146 E mit gestanztem Crimpkontakt 2 C146 E with stamped crimp contact 3 C146 S mit gestanztem Crimpkontakt 3 C146 S with stamped crimp contact 4 C146 D mit gestanztem Crimpkontakt 4 C146 D with stamped crimp contact Amphenol 187 C 146 Technische Informationen Technical information 188 Spannungseinstufung der Steckverbinder Voltage grading of connectors Allgemeines General Zur Spannungseinstufung von Steckverbindern werden die Luft- und Kriechstrecken herangezogen. Die Beurteilung und Bemessung der Luftund Kriechstrecken hat sich durch die Einfuhrung der Isolationskoordination geandert. Clearances and creepage distances are the base for voltage grading of connectors. Valuation and dimensioning of clearances and creepage distances have changed since the introduction of insulation coordination. Es gelten dafur die folgenden Normen: The following standards apply for this: IEC 60664-1/10.92 Insulation coordination for equipment within low-voltage systems IEC 60664-1/10.92 Insulation coordination for equipment within low-voltage systems DIN VDE 0110-1/4.97 Isolationskoordination fur elektrische Betriebsmittel in Niederspannungsanlagen DIN VDE 0110-1/4.97 Isolationskoordination fur elektrische Betriebsmittel in Niederspannungsanlagen Isolationskoordination umfasst die Auswahl der elektrischen Isolationseigenschaften eines Betriebsmittels hinsichtlich dessen Anwendung und in Bezug auf seine Umgebung. Insulation coordination comprises the selection of the electrical insulation performances of the equipment, taking into account the expected use and its environment. Luftstrecken Die Luftstrecke ist die kurzeste Entfernung in Luft zwischen zwei leitenden Teilen. Ein wichtiger Punkt bei der Bemessung von Luftstrecken ist zunachst die Festlegung der Uberspannungskategorie. Die Norm hat die moglichen Uberspannungen in die nachstehenden vier Kategorien eingeteilt: Clearances The clearance is the shortest distance in air between two conductive parts. An important point for the dimensioning of clearances is the determination of the overvoltage category. The above standard specifies the possible overvoltages into the four following categories: Uberspannungskategorie I Betriebsmittel, die zur Anwendung in Geraten oder Teilen von Anlagen bestimmt sind, in denen keine Uberspannungen auftreten konnen. Hierunter fallen Gerate, die vorwiegend mit Kleinspannungen betrieben werden. Overvoltage category I Equipment intended for the use in appliances or parts of installations in which no overvoltage can occur. Examples are low-voltage equipments. Uberspannungskategorie II Betriebsmittel, die zur Anwendung in Anlagen oder Teilen von diesen bestimmt sind, in denen Blitzuberspannungen nicht berucksichtigt werden mussen, aber wohl Uberspannungen durch Schaltvorgange. Hierunter fallen z.B. elektrische Haushaltsgerate. Overvoltage category II Equipment intended for the use in installations or parts of it in which lightning overvoltages do not need to be considered, but switching overvoltages generated by the equipment do need to be considered. Examples are household appliances. Uberspannungskategorie III Betriebsmittel, die zur Anwendung in Anlagen oder Teilen von diesen bestimmt sind, bei denen Blitzuberspannungen nicht berucksichtigt werden mussen, wohl aber Uberspannungen durch Schaltvorgange und an die im Hinblick auf die Sicherheit und Verfugbarkeit des Betriebsmittels oder von davon abhangigen Netzen besondere Anforderungen gestellt werden. Hierunter fallen Betriebsmittel fur feste Installationen, z.B. Schutzeinrichtungen, Schutze, Schalter und Steckdosen. Overvoltage category III Equipment intended for the use in installtions or parts of it in which lightning overvoltages do not need to be considered, however switching overvoltages generated by the euipment, and for cases where the reliability and the availability of the equipment or its dependent circuits are subject to special requirements. Examples are protecting means, switches and sockets. Uberspannungskategorie IV Betriebsmittel, die zur Anwendung in Anlagen oder Teilen von diesen bestimmt sind, bei denen Blitzuberspannungen zu berucksichtigen sind. Hierunter fallen Betriebsmittel zum Anschluss an Freileitungen, z.B. Rundsteuerempfanger, Zahler. Overvoltage category IV Equipment intended for the use in installations or parts of it in which lightning overvoltage has to be considered. Examples are electricity meters, overcurrent protection switches. Amphenol C 146 Technische Informationen Technical information Liegt die Uberspannungskategorie fest, dann kann je nach Nennspannungsbereich des Stromversorgungs-Systems und der Uberspannungskategorie die Bemessungs-Stospannung fur das Betriebsmittel ermittelt werden. Es gilt dabei die folgende Tabelle 9: Once the overvoltage category has been defined the rated impulse withstand voltage can be selected for the equipment based on the nominal voltage of the supply system and the overvoltage category using chart 9 below: Tabelle 9 Chart 9 Nennspannung des Stromversorgungs-Systems in V (nach IEC 60038) Nominal voltage of the supply system in V (based on IEC 60038) Bemessungs-Stospannung in kV fur Uberspannungskategorie Rated impulse voltage in kV for overvoltage category Drei-phasige Systeme / Three phase systems IV III II I 230/400 277/480 6 4 2,5 1,5 400/690 8 6 4 2,5 1000 12 8 6 4 Ist die Bemessungs-Stospannung ermittelt, so muss jetzt der Verschmutzungsgrad entsprechend der zu erwartenden Verschmutzung der unmittelbaren Umgebung des Betriebsmittels festgelegt werden. Hierzu dienen die folgenden vier festgelegten Grade: After the rated impulse withstand voltage has been selected the pollution degree must be defined taking the expected pollution around the equipment into account. The following four degrees of pollution are established: Verschmutzungsgrad 1 Es tritt keine oder nur trockene, nicht leitfahige Verschmutzung auf. Die Verschmutzung hat keinen Einfluss. Pollution degree 1 No pollution or only dry, non-conductive pollution occurs. The pollution has no influence. Verschmutzungsgrad 2 Es tritt nur nicht leitfahige Verschmutzung auf. Gelegentlich muss jedoch mit vorubergehender Leitfahigkeit durch Betauung gerechnet werden. Pollution degree 2 Only non-conductive pollution occurs except occasionally a temporary conductivity caused by condensation is to be expected. Verschmutzungsgrad 3 Es tritt leitfahige Verschmutzung auf oder trockene, nicht leitfahige Verschmutzung, die leitfahig wird, da Betauung zu erwarten ist. Pollution degree 3 Conductive pollution occurs or dry non-conductive pollution occurs which becomes conductive due to condensation which is to be expected. Verschmutzungsgrad 4 Die Verunreinigung fuhrt zu einer bestandigen Leitfahigkeit, hervorgerufen durch leitfahigen Staub, Regen oder Schnee. Pollution degree 4 The pollution generates persistent conductivity caused by conductive dust or by rain or snow. Zu beachten ist, dass Teile von Steckverbindern und Steckvorrichtungen mit ausreichender Kapselung (min. IP 54) auch nach einem niedrigeren Verschmutzungsgrad bemessen werden konnen. Dies gilt auch fur Steckverbinder im Trennbereich, bei denen die Kapselung im gesteckten Zustand durch das Steckverbindergehause erreicht wird und die nur fur Prufund Wartungszwecke getrennt werden. It has to be noted that for a connector or plug and socket devise with a degree of protection of min. IP 54 the parts inside the enclosure may be dimensioned for a lower pollution degree. This also applies to mated connectors which enclosure is ensured through the connector housing and which may only be disengaged for test and maintenance purposes. Aus der Bemessungs-Stospannung und dem Verschmutzungsgrad konnen jetzt aus Tabelle 10 die Mindest-Luftstrecken ermittelt werden. When impulse withstand voltage and the pollution degree are defined the minimum clearances can be selected from chart 10. Amphenol 189 C 146 Technische Informationen Technical information Tabelle 10 BemessungsStospannung in kV Impulse withstand voltage in kV 0,33 0,40 0,50 0,60 0,80 1,0 1,2 1,5 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10 12 15 20 25 30 40 50 60 80 100 190 Chart 10 Mindestluftstrecken in mm bis zu 2000 m uber NN Minimum clearances in air in mm up to 2000 m above sea level Fall A (inhomogenes Feld) Case A (non homogeneous field) Fall B (homogenes Feld) Case B (homogeneous field) Verschmutzungsgrad Pollution degree Verschmutzungsgrad Pollution degree 1 2 3 4 1 2 3 4 0,01 0,02 0,04 0,06 0,10 0,15 0,25 0,5 1,0 1,5 2 3 4 5,5 8 11 14 18 25 33 40 60 75 90 130 170 0,2 0,8 1,6 0,2 0,8 1,6 0,25 0,5 1,0 1,5 2 3 4 5,5 8 11 14 18 25 33 40 60 75 90 130 170 1,0 1,5 2 3 4 5,5 8 11 14 18 25 33 40 60 75 90 130 170 0,01 0,02 0,04 0,06 0,1 0,15 0,2 0,3 0,45 0,6 0,8 1,2 1,5 2 3 3,5 4,5 5,5 8 10 12,5 17 22 27 35 45 0,3 0,45 0,6 0,8 1,2 1,5 2 3 3,5 4,5 5,5 8 10 12,5 17 22 27 35 45 1,2 1,5 2 3 3,5 4,5 5,5 8 10 12,5 17 22 27 35 45 2 3 3,5 4,5 5,5 8 10 12,5 17 22 27 35 45 2 3 4 5,5 8 11 14 18 25 33 40 60 75 90 130 170 Bei der Festlegung der Mindestluftstrecken von Steckverbindern sind in der Regel die Werte des inhomogenen Falls anzuwenden bzw. ist die entsprechende Luftstrecke durch eine Spannungsprufung zu uberprufen. When defining the minimum clearances for connectors generally the values of the inhomogeneous field can be chosen or the required clearance has to be defined by a voltage test. Kriechstrecken Die Kriechstrecke ist die kurzeste Entfernung entlang der Oberflache eines Isolierstoffes zwischen zwei leitenden Teilen. Zur Bemessung der Kriechstrecke wird die aus der entsprechenden Netzart abgeleitete Bemessungsspannung und die bereits bei der Luftstrecke gewahlte Zuordung des Verschmutzungsgrades herangezogen. Auerdem wird die Kriechwegbildung des vom Hersteller verwendeten Isolierstoffes berucksichtigt. Die Isolierstoffe werden entsprechend ihrem Kriechwegbildungsfaktor CTI (Comparative Tracking Index) in vier Gruppen eingeteilt: Isolierstoffgruppe I 600 CTI Isolierstoffgruppe II 400 CTI <600 Isolierstoffgruppe IIIa 175 CTI <400 Isolierstoffgruppe IIIb 100 CTI <175 Creepage distances The creepage distance is the shortest distance along the surface of the insulating material between two conductive parts. For the dimensioning of the creepage distance the following factors are taken into account: the rated voltage, the pollution degree and the tracking formation of the insulating material. The materials are separated into four groups according to their CTI values (Comparative Tracking Index): Material group I Material group II Material group IIIa Material group IIIb 600 CTI 400 CTI < 600 175 CTI < 400 100 CTI < 175 Amphenol C 146 Technische Informationen Technical information Die Mindestkriechstrecken konnen dann aus der Tabelle 11 entnommen werden. The minimum creepage distances can be selected from chart 11 . Tabelle 11 Chart 11 Bemessungsspannung U-eff Rated voltage U in V 10 12,5 16 20 25 32 40 50 63 80 100 125 160 200 250 320 400 500 630 800 1000 1250 1600 2000 2500 3200 4000 5000 6300 8000 10000 Mindestkriechstrecke in mm / Min. creepage distance in mm Gedruckte Ubrige Betriebsmittel / Other devices Schaltungen Printed circuits Verschmutzungsgrad Pollution degree Verschmutzungs- 1 grad Pollution degree 1 2 Verschmutzungsgrad Pollution degree Verschmutzungsgrad Pollution degree 2 3 4 Isolierstoffgruppe Material group Isolierstoffgruppe Material group Isolierstoffgruppe Material group 2) 3) 2) I II III a 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,56 0,75 1 1,3 1,8 2,4 3,2 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1 1,6 2 2,5 3,2 4 5 0,08 0,09 0,1 0,11 0,125 0,14 0,16 0,18 0,2 0,22 0,25 0,28 0,32 0,42 0,56 0,75 1 1,3 1,8 2,4 3,2 4,2 5,6 7,5 10 12,5 16 20 25 32 40 0,4 0,42 0,45 0,48 0,5 0,53 0,56 0,6 0,63 0,67 0,71 0,75 0,8 1 1,25 1,6 2 2,5 3,2 4 5 6,3 8 10 12,5 16 20 25 32 40 50 0,4 0,42 0,45 0,48 0,5 0,53 0,8 0,85 0,9 0,95 1 1,05 1,1 1,4 1,8 2,2 2,8 3,6 4,5 5,6 7,1 9 11 14 18 22 28 36 45 56 71 0,4 0,42 0,45 0,48 0,5 0,53 1,1 1,2 1,25 1,3 1,4 1,5 1,6 2 2,5 3,2 4 5 6,3 8 10 12,5 16 20 25 32 40 50 63 80 100 III b Die in diesem Katalog beschriebenen Steckverbinder sind festen Bemessungsspannungen zugeordnet, die sich auf den allgemeinen Anwendungsfall im Maschinenbau beziehen. Liegen davon abweichende Anwendungsfalle vor, so kann aufgrund der obigen Tabelle eine andere Bemessungsspannung ermittelt werden. Amphenol I II III a 1 1,05 1,1 1,2 1,25 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2 2,5 3,2 4 5 6,3 8 10 12,5 16 20 25 32 40 50 63 80 100 125 1 1,05 1,1 1,2 1,25 1,3 1,6 1,7 1,8 1,9 2 2,1 2,2 2,8 3,6 4,5 5,6 7,1 9 11 14 18 22 28 36 45 56 71 90 110 140 1 1,05 1,1 1,2 1,25 1,3 1,8 1,9 2 2,1 2,2 2,4 2,5 3,2 4 5 6,3 8,0 10 12,5 16 20 25 32 40 50 63 80 100 125 160 III b I II III a 1,6 1,6 1,6 1,6 1,7 1,8 1,9 2 2,1 2,2 2,4 2,5 3,2 4 5 6,3 8 10 12,5 16 20 25 32 40 50 63 80 100 125 160 200 1,6 1,6 1,6 1,6 1,7 1,8 2,4 2,5 2,6 2,8 3,0 3,2 4 5 6,3 8 10 12,5 16 20 25 32 40 50 63 80 100 125 160 200 250 1,6 1,6 1,6 1,6 1,7 1,8 3 3,2 3,4 3,6 3,8 4 5 6,3 8 10 12,5 16 20 25 32 40 50 63 80 100 125 160 200 250 320 III b Connectors in this catalogue are allocated to fixed rated voltages which apply to the machine building industry. In case of other applications the above chart can be used to determine other rated voltages. 191 C 146 Technische Informationen Technical information Schutzarten Degree of protection Elektrische Betriebsmittel, zu denen Steckverbinder zahlen, mussen aus Sicherheitsgrunden gegen Einflusse von auen, wie z.B. Staub, Fremdkorper, Beruhrung, Feuchtigkeit und Wasser geschutzt werden. Diesen Schutz ubernehmen bei Industrie-Steckverbindern die Gehause mit ihrer Verriegelung und dem abgedichteten Kabeleinlass. Den Grad der Schutzart kann man dem Einsatz entsprechend wahlen. In der Norm IEC 60529 bzw. DIN EN 60529 sind die Schutzgrade festgelegt und in verschiedene Klassen eingeteilt. Die Bezeichnung erfolgt in nachstehender Weise: IP65 Kennzeichen (Internat. Protection) 1. Kennziffer (Schutzgrad gegen den Zugang zu gefahrlichen Teilen und gegen feste Fremdkorper) 2. Kennziffer (Schutzgrad gegen Wasser) Die nachfolgenden Tabellen 12 und 13 zeigen alle Schutzarten in einer Ubersicht. Electrical connector devices have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. This protection is provided on industrial connectors by the housing latching devices and sealed cable entries. The degree of protection depends on the type of intended use. The standard IEC 60529 and/or DIN EN 60529 has specified the degree of protection and divided them into several classes. Tabelle 12 Chart 12 1. Kennziffer Kurzbeschreibung Definition 1st charact. Brief description numeral Definition 0 1 Nicht geschutzt Geschutzt gegen den Zugang zu gefahrlichen Teilen mit dem Handrucken. Geschutzt gegen feste Fremdkorper O 50 mm. Geschutzt gegen den Zugang zu gefahrlichen Teilen mit einem Finger. Geschutzt gegen feste Fremdkorper O 12,5 mm. - Die Sonde, Kugel O 50 mm, darf nicht voll eindringen und muss ausreichenden Abstand zu gefahrlichen Teilen haben. Der gegliederte Pruffinger, O 12 mm, 80 mm Lange, muss ausreichenden Abstand zu gefahrlichen Teilen haben. Die Sonde, O 12,5 mm, darf nicht voll eindringen. 0 1 - The probe, sphere of 50mm O, shall not fully penetrate and shall have adequate clearance from hazardous parts. The jointed test finger of 12mm O, 80mm length, shall have adequate clearance from hazardous parts. The probe, sphere of 12,5mm O, shall not fully penetrate. 2 3 4 5 6 192 The degree of protection is indicated in the following way: IP 65 Code letters (Internat. Protection) 1st charact. numeral (degree of protection against access to hazardous parts and against solid foreign objects) 2nd charact. numeral (degree of protection against ingress of water) The following charts 12 an13 give an overview about all protection degrees. Geschutzt gegen den Zugang Die Sonde, O 2,5 mm, darf zu gefahrlichen Teilen mit uberhaupt nicht eindringen. einem Werkzeug. Geschutzt gegen feste Fremdkorper O 2,5 mm. Geschutzt gegen den Zugang Die Sonde, O1 mm, darf zu gefahrlichen Teilen mit uberhaupt nicht eindringen. einem Draht. Geschutzt gegen feste Fremdkorper O 1 mm. Geschutzt gegen den Zugang Die Sonde, O 1 mm, darf nicht zu gefahrlichen Teilen mit eindringen. Eindringen von einem Draht. Staubgeschutzt. Staub ist nicht vollstandig verhindert, aber der Staub darf nicht in einer solchen Menge eindringen, dass das zufriedenstellende Arbeiten des Gerates oder die Sicherheit beeintrachtigt wird. Geschutzt gegen den Zugang Die Sonde, O 1mm, darf nicht zu gefahrlichen Teilen mit eindringen. Kein Eindringen einem Draht. Staubdicht. von Staub. 2 3 Non-protected Protected against access to hazardous parts with the back of a hand. Protected against solid foreign objects of 50mm O. Protected against access to hazardous parts with a finger. Protected against solid foreign objects of 12,5mm O. Protected against access to hazardous parts with a tool. Protected against solid foreign objects of 2,5mm O. The probe of 2,5mm O shall not penetrate at all. 4 Protected against access to hazardous parts with a wire. The probe of 1mm O shall Protected against solid not penetrate at all. foreign objects of 1mm O. 5 Protected against access to hazardous parts with a wire. Dust-protected. 6 Protected against access to hazardous parts with a wire Dust-tight. The probe of 1mm O shall not penetrate. Intrusion of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. The probe of 1mm O shall not penetrate. No intrusion of dust. Amphenol C 146 Technische Informationen Technical information Tabelle 13 Chart 13 2. Kennziffer Kurzbeschreibung 0 1 Nicht geschutzt - Geschutzt gegen Tropfwasser Senkrecht fallende Tropfen durfen keine schadlichen Wirkungen haben. Geschutzt gegen Tropfwasser, Senkrecht fallende Tropfen wenn das Gehause bis zu durfen keine schadlichen 15 geneigt ist Wirkungen haben, wenn das Gehause um einen Winkel bis zu 15 beiderseits der Senkrechten geneigt ist. Geschutzt gegen Spruhwasser Wasser, das in einem Winkel bis zu 60 beiderseits der Senkrechten gespruht wird, darf keine schadlichen Wirkungen haben. 2 3 4 5 6 7 8 9K 1) Definition Geschutzt gegen Spritzwasser Wasser, das aus jeder Richtung gegen das Gehause spritzt, darf keine schadlichen Wirkungen haben. Geschutzt gegen Strahlwasser Wasser, das aus jeder Richtung als Strahl gegen das Gehause gerichtet ist, darf keine schadlichen Wirkungen haben. Wasser, das aus jeder Richtung Geschutzt gegen starkes als starker Strahl gegen das Strahlwasser Gehause gerichtet ist, darf keine schadlichen Wirkungen haben. Wasser darf nicht in einer Geschutzt gegen die Wirkungen beim zeitweiligen Menge eintreten, die schadliche Untertauchen in Wasser Wirkungen verursacht, wenn das Gehause fur 30 Min. in 1m Tiefe in Wasser untergetaucht ist. Geschutzt gegen die Wirkungen beim dauernden Untertauchen in Wasser Geschutzt gegen Wasser bei Hochdruck-/Dampfstrahl-Reinigung Wasser darf nicht in einer Menge eintreten, die schadliche Wirkungen verursacht, wenn das Gehause dauernd unter Wasser getaucht ist unter Bedingungen, die zwischen Hersteller und Anwender vereinbart werden mussen. Die Bedingungen mussen jedoch schwieriger sein als fur die Kennziffer 7. Wasser, das aus jeder Richtung unter stark erhohtem Druck gegen das Gehause gerichtet ist, darf keine schadlichen Wirkungen haben. 2nd charact. Brief description numeral Definition 0 1 Non-protected Protected against vertically falling water drops Protected against vertically falling water drops when enclosure tilted up to 15 - Vertically falling drops shall have no harmful effects. Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angel up to 15 . 3 Protected against spraying water Water sprayed at any angle up to 60 shall have no harmful effects. 4 Protected against splashing water Water splashed against the enclosure from any direction shall have no harmful effects. Protected against water jets Water projected in jets against the enclosure from any direction shall have no harmful effects. Protected against powerful water jets Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. 2 5 6 7 8 9 K 1) Protected against the effects Intrusion of water in quantities of temporary immersion in causing harmful effects shall water not be possible when the enclosure is temporalily immersed in water for 30 min. in 1m depth. Protected against the effects Intrusion of water in quantities of continous immersion in causing harmful effects shall water not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. Protected against water during high pressure/steam jet cleaning Water projected in powerful jets with high pressure and heat against the enclosure from any direction shall have no harmful effects. 1) Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code 1) Anmerkung: Kennziffer nach DIN 40050 Teil 9 Straenfahrzeuge, IP-Schutzarten Amphenol 193 C 146 Technische Informationen Technical information Kabel Zum Anschluss an alle Amphenol-Industrie-Steckverbinder wird die Verwendung von handelsublichen hochflexiblen KunststoffSteuerleitungen nach VDE-Vorschriften empfohlen. Auf diese Leitungen sind unsere Steckverbinder in Bezug auf Kontaktanzahl und Kabeleinfuhrung ausgelegt. Bei der Leitungsauswahl ist darauf zu achten, dass die Leitungen den Steckverbinder nicht angreifen (Losungsmittel) oder eine mogliche Feuerbestandigkeit aufheben. Abdichtung Die Abdichtung der Kabeleinfuhrungen aller Amphenol-IndustrieSteckverbinder erfolgt mittels Verschraubungen. Wir verwenden grundsatzlich Dichtringe aus Neoprene, die eine gute Bestandigkeit gegen Fette, Ole und Benzin besitzen. Auswahl der Verschraubungen Neben Dichtringen mit konstantem Innendurchmesser, dessen Ma der Bezeichnung der Verschraubung entspricht, gibt es auch ausschneidbare Dichtringe (Zwiebelringe), bei denen der Innendurchmesser durch Ausschneiden von Ringen in einem gewissen Mae variiert werden kann. Die Auswahl der Verschraubung fur verschiedene Kabeldurchmesser (Kabelaufbau) kann von nachfolgendem Diagramm 5 abgeleitet werden (siehe auch Seite 184). Cable For the termination of all Amphenol-industrial connectors we recommend the use of commercially available high flexible cable acc. to VDE or other local specifications. Our connectors are designed to fit these cables especially as far as number of conductors and cable diameters are concerned. When selecting cables care must be taken that the cables do not affect (solvent) the connector or preserve an existing fire resistance. Sealing The sealing of the cable entries of all Amphenol-industrial connectors is with gland bushings. All sealings are made from Neoprene which has a good resistance against grease, oil and gasoline. Selection of gland bushings Beside glands with a fixed inside diameter which equals the number, there are also glands with variable inside diameters available (so-called onion glands). The inside diameter of these glands can be adjusted to the outside cable diameter by cutting out the smaller rings. The selection of the appropiate gland bushing depends on the cable diameter (cable composition) can be made using the following diagram 5 (see page 184). Diagram 5 Aderzahl / Number of conductors Diagramm 5 Kabel-O / Cable dia. 194 Amphenol C 146 Technische Informationen Technical information PG 48 Metrisch / Metric PG 42 PG / PG PG 36 PG 29 M 63 PG 21 M 50 PG 16 M 40 PG 13,5 PG 11 M 32 PG 9 PG 7 M 25 M 20 M 16 M 12 Dichtbereich / Area of Tightness Metrische Kabelverschraubungen passen nur in metrische Gehauseoffnungen. Zusatzlich bieten wir weiterhin Gehause und Verschraubungen mit PG-Gewinde an. Metric cable glands fit only into metric housing openings. Additionally we offer further more housings and screw connections with PG threads. PG / PG Aussendurchmesser/ Outer Diameter PG 48 M 63 PG 42 PG 36 PG 29 PG 21/23 PG 16 PG 13,5 PG 11 PG 9 PG 7 PG 48 Amphenol Metrisch / Metric M 50 M 40 M 32 M 25 M 20 M 16 M 12 195 C 146 Steckverbinderbegriffe Abschirmung Abschirmung innerer oder auerer elektrischer Felder durch Bildung einer Aquipotentialflache in Form von Metallklappen oder Metallisierungen auf der Innen- und Auenseite von Kappen aus Kunststoff. Die Abschirmung wird in der Regel mit dem Schirmgeflecht des angeschlossenen Kabels und mit dem Gerategehause verbunden. Bemessungsgroen, elektrische - Bemessungsspannung ist die Spannung, fur die der Steckverbinder oder die Steckvorrichtung bemessen ist und auf die bestimmte Betriebseigenschaften bezogen werden. - Bemessungsstrom ist der Strom, den ein Steckverbinder oder eine Steckvorrichtung gleichzeitig durch alle Kontakte dauernd (nicht intermittierend) fuhren kann, ohne dass dabei die obere Grenztemperatur uberschritten wird. - Schaltleistung einer Steckvorrichtung ist die Leistung, welche die Steckvorrichtung unter festgelegten Bedingungen schalten kann. -Prufspannung ist die Spannung, der ein Steckverbinder oder eine Steckvorrichtung bei vorgegebenen Bedingungen ohne Durch- oder Uberschlag widersteht. Bugelverriegelung Verriegelung von zwei Halften eines Steckverbinderpaares durch ein formschlussiges Element, das durch einen als Bugel ausgestalteten Hebel betatigt wird. Erst wenn die beiden Halften vollstandig zusammengesteckt sind, kommt der Bugel in seine Endlage. Crimpbacken Derjenige Teil eines Crimpwerkzeugs, der den Crimpbereich verformt. Er besteht ublicherweise aus dem Crimpamboss, dem Crimpstempel und dem Positionierstuck. Crimpbereich Der Bereich der Crimphulse, in dem die Crimpverbindung durch Druckverformung oder Druckumformung der Hulse um den Leiter herum ausgefuhrt ist. Crimphulse Eine Anschlusshulse, die einen oder mehrere Leiter aufnehmen kann und durch Anwendung eines Crimpwerkzeugs gecrimpt werden kann. Crimpverbindung Durch systematisches Verformen einer Crimphulse um abisolierte Leiter herum hergestellte, dauerhafte elektrische und mechanische Verbindung; Crimpverbindung siehe IEC 60352-2, 2a; 2b; 2c, DIN EN 60 352-2 (siehe auch Katalog Werkzeuge") Durchgangswiderstand Der elektrische Widerstand in einem gesteckten bzw. geschalteten Kontaktpaar, gemessen zwischen den Anschlusspunkten unter vorgeschriebenen Messbedingungen. Prufungen nach ICE 60512-2, DIN EN 60 512-2 Elektromagnetische Einflusse Bei Steckverbindern werden unerwunschte elektromagnetische Einflusse auf die zu verbindenden Leitungen bzw. auf die Umgebung durch Abschirmung verhindert. Gehause Teil eines Steckverbinders, in dem Kontakttrager und Kontakte montiert sind. Es kann zur Verriegelung dienen. Grenztemperaturen Untere und obere Temperaturen, die nicht zu einer Schadigung der Werkstoffe fuhren; dazwischen liegt der Betriebstemperaturbereich. - Untere Grenztemperatur: Die tiefste zulassige Temperatur, bei der ein Steckverbinder oder eine Steckvorrichtung noch betrieben werden darf. - Obere Grenztemperatur: Die hochste zulassige Temperatur, bei der ein Steckverbinder oder eine Steckvorrichtung noch betrieben werden darf. Sie ist die Summe aus Eigenerwarmung (einschlielich Kontakterwarmung) und Umgebungstemperatur. Isolationswiderstand Widerstand der Isolierung zwischen zwei leitfahigen Teilen. Isoliervermogen eines Werkstoffes, der zwei benachbarte Kontakte oder einen Kontakt gegen Masse moglichst hochohmig trennt. Messund Prufverfahren nach IEC 60512-2, 3a, DIN EN 60 512-2 Isolierstoffgruppe Einteilung von Isolierstoffen entsprechend ihren CTI-Werten (CTI = Comperative Tracking Index / Vergleichszahl der Kriechwegbildung). Kompatible Steckverbinder Zwei Steckverbinder sind kompatibel, wenn sie mechanisch austauschbar und zusammensteckbar sind und den gleichen technischen Anforderungen entsprechen. Kontaktgroe Kennzeichnung zur Differenzierung der Kontakte nach folgendem Systemen a) Kennzeichnungssystem: Kennzeichnung des Kontaktes nach der maximal anschliebaren Leitergroe (AWG American Wire Gauge); 196 b) Strombelastbarkeitssystem: Kennzeichnung des Kontaktes nach seiner maximalen Strombelastbarkeit. c) Querschnittsystem: Kennzeichnung des Kontaktes nach dem maximal anschliebaren Leiterquerschnitt. Leiterwiderstand. Kontaktmaterial Die Wahl des Kontaktmaterials - meist Kupfer oder Kupferlegierungen - hangt von den gewunschten Eigenschaften des Steckverbinders ab. Hierbei spielen Durchgangswiderstand; Steck- und Ziehkrafte eine magebliche Rolle. Neben Steckhaufigkeit und Umwelteinflussen bestimmen diese auch die Art der Oberflachenuberzuge Nickel, Zinn, Gold, Silber, Palladium. Sie werden galvanisch oder walztechnisch aufgebracht. Kriechstrecken Kurzeste Entfernung zwischen spannungsfuhrenden Teilen auf der Oberflache von Isolierkorpern, sofern festgelegte Mindestmae vorliegen (Kriechstreckenverlangerung). Die Abstande dienen der Sicherheit gegen Uberschlage. Sie werden in Abhangigkeit von der Reihenspannung, den Anwendungsbedingungen und den Eigenschaften des Isolierwerkstoffes festgelegt. Die unterschiedliche Kriechstromfestigkeit der Isolierstoffe ist bei der Festlegung der Kriechstrecken zu beachten (DIN VDE 0110-1.) Lebensdauer Anzahl der Steckzyklen, die noch nicht zum Durchrieb der leitenden Kontaktflachen fuhrt und den Kontaktwiderstand nicht unzulassig erhoht. Mess- und Prufverfahren nach IEC 60512-5, DIN EN 60512-5 Luftstrecken Kurzeste, als Fadenma gemessene Entfernung zwischen zwei spannungsfuhrenden Metallteilen in der Luft, nach DIN VDE 0110-1. Rechteck-Verbinder Steckverbinder mit vorwiegend rechteckiger Form des Steckgesichtes. Schaltleistung Die Schaltleistung einer Steckvorrichtung ist die Leistung, die die Steckvorrichtung unter festgelegten Bedingungen schalten kann. Spannungsfestigkeit Spannung, der ein Steckverbinder oder eine Steckvorrichtung bei vorgegebenen Bedingungen ohne Durchschlag oder Uberschlag widersteht. Die Spannungsfestigkeit liegt uber der Nennspannung, sie dient zum Nachweis des Isoliervermogens des Steckverbinders. Steckverbinder Ein Bauelement, das es gestattet elektrische Leiter anzuschlieen, und dazu bestimmt ist, mit einem passenden Gegenstuck Verbindungen herzustellen und zu trennen. Steckverbinder sind Betriebsmittel, die bei bestimmungsgemaer Verwendung (unter elektrischer Spannung) nicht gesteckt oder getrennt werden durfen (im Gegensatz Steckverbinder mit Schaltleistung). Nach der Befestigung werden freie und feste Steckverbinder unterschieden. Der Steckverbinder besteht aus dem Steckverbindergehause und den Kontaktelementen. Das Steckverbindergehause enthalt den Kontakteinsatz. Steckverbindung Eine elektrische Steckverbindung besteht aus zwei Steckverbindern, d. h. aus mindestens zwei Kontaktelementen. Alle weiteren Komponenten wie Gehause, Kontakttrager, Kontakthalterung usw., erfullen sekundare Funktionen. Steckverbinder mit Schaltleistung Ein Bauelement, das bei bestimmungsgemaer Verwendung unter elektrischer Spannung oder Last gesteckt oder getrennt wird. Der Schutzleiterkontakt muss wahrend des Steckens vor- und wahrend des Trennens nacheilen (voreilender Kontakt). Steckzyklen Mechanisches Betatigen von Steckverbindern und Steckvorrichtungen durch Stecken und Ziehen. Ein Steckzyklus besteht aus je einem Steck- und Ziehvorgang. Uberspannungskategorie Ein Zahlenwert, der eine Stehstospannung festlegt. Er werden die Uberspannungskategorien I, II, III und IV verwendet. Verschmutzungsgrad Zahlenwert, der die zu erwartende Verschmutzung der Mikro-Umgebung angibt. Er werden die Verschmutzungsgrade 1, 2, 3 und 4 verwendet. Voreilender Kontakt Erfordert der Schaltungsaufbau, dass aus Schutzgrunden, z. B. fur Schutzleiter, ein oder mehrere Kontakte eines Steckverbinders beim Stecken zuerst Kontakt herstellen oder beim Ziehen als letzte getrennt werden, sind Steckverbinder mit voreilenden Kontakten (Stift bzw. Messer, Buchse oder Feder) zu verwenden. Amphenol C 146 Connector glossary American Wire Gauge (AWG) System of numerical designations for wire sizes, based on specified ranges of cross-sectional areas. Starts with 4/0 (000) at the largest size, going to 3/0, 2/0, 1/0, 1, 2, and up to 40 and beyond for the smallest size. A step of one AWG number corresponds to a reduction of cross-sectional area of appr. 20 %. Electromagnetic interference (EMI) General term describing the undesirable effects of the immission or emission of radio frequency fields. In connectors electromagnetic interference is prevented by shielding. Shielded connectors normally provide means to connect the screens of attached cables. Attenuation A reduction of power. Occurs naturally when waves travel through lines, wave guides, or media such as air or water. Is produced additionally by imperfections in electrical or optical connections (attenuation in fibre optics), e. g. contact resistance, mismatch, etc. Funnel entry (restricted entry C146 D series) Flared or widened entrance to a conductor barrel permitting easier insertion of the conductor. Bulkhead connector Connector designed to be inserted into a panel cutout from the rear of the panel, thus forming part of the barrier between two spaces. Back-mounted. Clearance The shortest distance in air between two conductive parts, see IEC 60664. Climatic stability General term describing the behavior of components under various climatic conditions, e. g. high and low temperatures, tropical climate, high humidity, moist heat, fungus, atmospheric conditions (industial atmosphere), reduced air pressure, etc. Climatic conditions for test purposes are explained in IEC 60068, DIN 46 040. Connector A component which terminates conductors for the purpose of providing connection and disconnection to a suitable mating component which shall not be engaged or disengaged when live. Depending on the fastening to a cabinet, panel, rack etc. or a cable, they are classified as fixed or free connectors. A connector comprises one or more contacts and a housing which may have a separate connector insert and a separate outer housing or shell. Connector housing The part of a connector into which the insert and the contacts are assembled. It may function as part of the locking mechanism. Connector insert An insulating element designed to support and position contacts in a connector housing. Connector life The number of mating cycles prior to abrasion of the conductive contact surface and which does not result in a significant rise of the contact resistance. Tests according to test 9a of ICE 60512-5 / DIN EN 60512 Part 5. Contact The conductive element in a connector which mates with a corresponding element to provide an electrical path. Contact resistance The electrical resistance of a mated set of contacts under specified conditions. Tested according to tests 2a, 2b, 2c, of IEC 60 512 -2/ DIN EN 60 512-2. Contact size The designation used to differentiate one contact from another. It may be denoted by one of the following numbering systems: - numbering system: assigned numbers used to denote the size of the contact and its related conductor accomodation (e. g. in AWG units), - current rating system: the related current-carrying capacity is used to denote the size of the contact, - cross-sectional area system: reference is made to the cross-sectional area of the maximum conductor accommodation to denote the size of the contact, e. g. in mm2. Creepage distance The shortest distance along the surface of the insulating material between two conductive parts. The longer the distance, the less the risk of arc damage or tracking. Minimum creepage distances are specified according to the rated voltage and the applicable pollution degree and Comperative Tracking Index. Insertion or withdrawal force The force required to fully insert or withdraw a set of mated connectors without the effect of coupling, locking or similar devices. The insertion force is usually greater than the withdrawal force. Insulation grip The area of a crimp contact that has been reshaped around the insulation of the conductor by compression during the crimping operation. Insulation resistance The resistance of the insulation between two conductive elements, in particular, the resistance between two contacts or between a contact and a metallic housing or shield. Tested according to test 3a of IEC 60512-2 / DIN IEC 60512 Part 2. Intermateable Two connectors are intermateable when they are capable of being connected electrically and mechanically but without regard to their performance and intermountability. Locator In a crimping tool the device used for positioning a crimp contact or terminal end. Locking lever A mechanical locking device operated by actuating a lever, designed to hold two mated connectors together. Typically the lever can only be fully locked if the two connectors are correctly mated. Mating cycle One mating cycle comprises one insertion and one withdrawal operation. Term used in the definition of connector life. Material group Classification of insulation materials according to their CTI values (CTI = Comperative Tracking Index) Overvoltage category A numeral defining a transient overvoltage condition. Overvoltage categories I, II, III and IV are used. Connector with braking capacity (CBC) A component which may be engaged or disengaged in normal use, when live or under load. Note: In the sense of this document the term - live- is used if contacts are under voltage not necessarily with a current flowing across the contacts. The term - load - is used if a current is flowing across the contacts. Rated current A current value assigned by the manufacturer which the connector or PSD can carry continuously (without interruption) and simultaneously through all its contacts wired with the largest conductor preferrably at an ambient temperature of 40 C without the upper temperature being exceeded. Shield, shielding Shielding of internal or external electric fields by means of a plane with a uniform electric potential, formed by metal shells or metallic layers on the inside or outside of plastic shells. The shield is normally connected to the shielding braid of the cable and/or chassis ground. Terminal block An assembly of terminals in a housing or body of insulating material to facilitate interconnection between multiple conductors. Also called terminal strip or barrier blocks if the terminals are separated by an insulation barrier. Wire range The range of wire cross sections which is compatible with the dimensions the terminals of the contact (wire barrel). The wire range is expressed in mm2 or in AWG numbers. Crimped connection A solderless connection made by crimping. IEC 60352-2 / DIN IEC 60352 Part 2. Crimping die That part of a crimping tool which forms the crimp(s) and usually incorporates the crimp anvil(s) and the crimp indentor(s). Derating curve The method for determining derating is specified in IEC 60 512-3. Here the combination of ambient temperature (Tu) and the current (J) leading to the same maximum allowable temperature (Tb) at the hottest point of the connector are plotted. DIN Deutsches Institut fur Normung. A German standards organization. Amphenol 197 C 146 Abisolierlangen Stripping length Gestanzte Crimphulsen Serie C146 Abisolierlangen fur anzuschlieenden Leiter Anschlussquerschnitt [mm2] Termination crimp [mm2] Leiterquerschnitt Wire gauge mm2 0,09 - 0,25 28 - 24 0,14 - 0,5 0,14 0,25 0,5 0,25 0,5 0,5 0,75 1,0 1,5 26 24-22 20 24-22 20 20 20 - 18 18 - 16 16 - 15 1,5 2,5 16 - 15 14 0,5 - 1,5 1,5 - 2,5 2,5 - 4,0 2,5 4,0 Isolierungsdurchmesser der Leitung [mm] Insulation diameter of the wire [mm] Mindestabisolierlange mit Toleranz [mm] Min. stripping length [mm] Kontakt Art.-Nr. Contact part No. 0,7 - 1,6 2,3 + 0,4 N01 010 0130 (2) C146M N02 010 0130 (2) C146M 1,0 - 2,0 3,0 + 0,5 1,6 - 2,0 2,3 + 0,4 14 12 1,8 - 2,8 3,5 + 1,0 2,5 - 3,5 3,5 + 1,0 3,3 - 4,2 3,5 + 1,0 Gedrehte Crimpkontakte Serie C146 Abisolierlangen fur anzuschlieenden Leiter Anschlussquerschnitt [mm2] Termination crimp [mm2] Series 1,6 (Kontakt ohne Clip) (Contact without clip) N01 016 0003 N02 016 0003 C146D/M C146D/M N01 010 0131 (2) C146M N02 010 0131 (2) C146M N01 016 0002 N02 016 0002 N01 016 0015 N02 016 0015 N01 025 0001 N02 025 0001 N01 025 0007 N01 016 0005 N02 016 0005 N01 016 0016 N02 016 0016 N01 025 0010 N02 025 0010 N01 025 0008 N01 025 0043 N02 025 0043 C146D/M C146D/M C146D C146D C146E/M C146E/M/S C146S C146D/M C146D/M C146D C146D C146E/M C146E/M/S C146S C146M C146M Turned crimp contacts series C146, stripping length 2,5 (Kontakt mit Clip) (Contact with clip ) 2,5 (Kontakt ohne Clip) (Contact without clip) 3,6 (Kontakt mit Clip) (Contact with clip) Mind.abisolier- Kontakt Art Nr. in Serie lange+Toleranz [mm] Contact part Series Min. stripping No. length+ tolerance[mm] Kontakt Art Nr. in Serie Mind.abisolier- Kontakt Art Nr. in Serie lange+Toleranz Contact part Series Contact part Series [mm] Min. stripping No. No. length+ tolerance[mm] N01 016 0024 C146 N02 016 0024 D/DD/M Mind.abisolier- Kontakt Art Nr. in Serie lange+Toleranz [mm] Contact part Series Min. stripping No. length+ tolerance[mm] 0,14 - 0,37 Mind.abisolierlange+Toleranz [mm] Min. stripping length+ tolerance[mm] 8+1 0,5 8+1 N01 016 0025 C146 7+1 N02 016 0025 D/DD/M N01 025 0029 C146 N02 025 0029 M 7+1 N01 025 0035 C146 N02 025 0035 E/EE 0,75 - 1,0 8+1 N01 016 0026 C146 7+1 N02 016 0026 D/DD/M N01 025 0030 C146 N02 025 0030 M 7+1 N01 025 0036 C146 N02 025 0036 E/EE 1,5 8+1 N01 016 0027 C146 7+1 N02 016 0027 D/DD/M N01 025 0031 C146 N02 025 0031 M 7+1 N01 025 0037 C146 N02 025 0037 E/EE 10 + 1 N01 036 0004 C146 N02 036 0004 M 2,5 6+1 N01 016 0028 C146 7+1 N02 016 0028 D/DD/M N01 025 0032 C146 N02 025 0032 M 7+1 N01 025 0038 C146 N02 025 0038 E/EE 10 + 1 N01 036 0005 C146 N02 036 0005 M 7+1 N01 025 0033 C146 N02 025 0033 M 7+1 N01 025 0039 C146 N02 025 0039 E/EE 10 + 1 N01 036 0001 C146 N02 036 0001 M 6,0 10 + 1 N01 036 0002 C146 N02 036 0002 M 10,0 10 + 1 N01 036 0003 C146 N02 036 0003 M 4,0 198 in Serie AWG 0,09 - 0,25 0,25 - 0,5 Stamped crimp contacts series C146, stripping length Amphenol C 146 Abisolierlangen Stripping length Zeitersparnis durch den Einsatz von gestanzten Kontakten Time saving through the introduction of stamped contacts Verdrahtungskosten verschiedener Anschlussarten Wiring costs of different contacts Verdrahtungskosten pro Kontakt in / Wiring costs per contact in 0,40 Schrauben (manuell) / Screwing manuel 0,35 Loten (manuell) / Soldering manuel Schrauben (maschinell) / Screwing machine 0,30 Crimpen (Handzange) / Crimping hand tool Crimpen (Handzange mit Vorschub) / Crimping hand tool with reels Crimpen (Maschine, Abisolieren separat) / Crimping machine without stripping 0,25 Crimpen (Halbautomat mit Stripper) / Crimping machine with stripping 0,20 0,15 0,10 0,05 0,00 10000 20000 50000 100000 200000 500000 1000000 Kontakte pro Jahr / Contacts per year Break Even bei ca. 60.000 Kontakten pro Jahr / contacts per year Rahmenbedingungen / General conditions: Laufzeit (Abschreibung) / Maturity (Depreciation) Zins / Interest Wartung / Maintenance Stundenlohn Bediener / Hourly wages 5 Jahre / years 8% 5% 20 Unverbindliche Angaben beruhen auf uns vorliegenden Erfahrungswerten. Non binding declarations are based on experienced values. Amphenol 199 C 146 Musterkoffer Sample Box Bestellnummer / Part Number FM 0300 146 1 2 3 4 5 10 11 12 13 14 6 200 15 7 8 16 9 1 Steckverbinder Serie C 146 E 16 pol 2 3 1 Connector series C 146 E 16 contacts Steckverbinder Serie C 146 A 10 pol 2 Connector series C 146 A 10 contacts EMV Gehause 3 EMC housing 4 Standard Gehause hohe Bauform ohne Stutzen 4 Standard housing high profile without stud 5 Steckverbinder Serie C 146 A 3 pol 5 Connector series C 146 A 3 contacts 6 EMV Tullengehause 6 EMC hood 7 Gedrehte Crimpkontakte 7 Turned crimp contacts 8 Gestanzte Crimpkontakte 8 Stamped crimp contacts 9 Losewerkzeug fur 1,6 mm Kontakte 9 Removal tool for 1,6 mm contacts 10 Kontakteinsatze Serie C 146 HvE 16 pol 10 Contact insert series C 146 HvE 16 contacts 11 Rahmen und Module Serie C 146 M 11 Frames and modules series C 146 M 12 Kontakteinsatze Serie C 146 D 15 pol (fur gedrehte Kontakte) 12 Contact inserts series C 146 D 15 contacts (for turned contacts) 13 Kontakteinsatze Serie C 146 D 40 pol (fur gestanzte Kontakte) 13 Contact inserts series C 146 D 40 contacts (for stamped contacts) 14 Kontakteinsatze Serie C 146 E 6 pol 14 Contact inserts series C 146 E 6 contacts 15 Kontakteinsatze Serie C 146 A 16 pol 15 Contact inserts series C 146 A 16 contacts 16 Kontakteinsatze Serie C 146 D 7 pol 16 Contact inserts series C 146 D 7 contacts Amphenol C 146 Werkzeugkoffer Tool box Bestellnummer / Part Number FM 0500 146 FM 0501 146 (ohne / without TB0200 146) 1 2 3 5 4 6 17 18 19 20 21 22 23 24 25 26 27 Bezeichnung Description Katalog Werkzeuge" / Catalogue Tools" Bestell-Nr./ Part No. 1 4 - Kerb Crimpzange 2 Service Hand Crimpwerkzeug 3 Losewerkzeug 4 Losewerkzeug 5 Zubehor 6 Losewerkzeug 7 Zubehor 8 Kontaktbehaltnis 9 Kontaktaufnahme 1 4 - Indent hand crimping tool 2 Service hand crimping tool 3 Removal tool 4 Removal tool 5 Accessories 6 Removal tool 7 Accessories 8 Contact container 9 Contact locator 10 Crimpbacken 11 Kontaktaufnahme 10 Crimping dies 11 Contact locator 12 Crimpbacken 13 Kontaktaufnahme 12 Crimping dies 13 Contact locator 14 Crimpbacken 15 Kontaktaufnahme 14 Crimping dies 15 Contact locator 16 Crimpbacken 17 Handcrimpwerkzeug 16 Crimping dies 17 Hand crimping tool Amphenol TB 0200 146 TA 0200 146 FG 0300 146 1 FG 0300 146 3 TB 0200 146 17D 438 SP TA 0000 TA 0001 146 0001 TA 0000 202 TA 0007 146 0003 TA 0000 141 TA 0002 146 0001 TA 0000 163 TA 0010 146 0004 TA 0000124 TA 0000 Seite / Page 9 12 17 17 9 17 5 7 7 7 7 7 7 7 7 5 201 C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. 17D 438 SP 17 DM 537 401 17 DM 537 405 17 DM 537 421 17 DM 537 425 C146 10A003 002 4 C146 10A003 102 3 C146 10A004 002 4 C146 10A006 000 1 C146 10A006 002 1 C146 10A006 102 1 C146 10A006 102 3 C146 10A006 102 5 C146 10A006 500 1 C146 10A006 810 1 C146 10A007 000 2 C146 10A007 500 2 C146 10A008 000 2 C146 10A008 500 2 C146 10A010 000 1 C146 10A010 002 1 C146 10A010 002 4 C146 10A010 102 1 C146 10A010 102 3 C146 10A010 102 4 C146 10A010 104 3 C146 10A010 500 1 C146 10A010 500 10 C146 10A010 810 1 C146 10A015 000 2 C146 10A015 009 2 C146 10A015 060 2 C146 10A015 500 2 C146 10A016 000 1 C146 10A016 002 1 C146 10A016 002 3 C146 10A016 002 4 C146 10A016 004 4 C146 10A016 102 1 C146 10A016 102 3 C146 10A016 102 4 C146 10A016 104 3 C146 10A016 104 4 C146 10A016 500 1 C146 10A016 810 1 C146 10A018 500 10 C146 10A024 000 1 C146 10A024 000 9 C146 10A024 002 1 C146 10A024 005 1 C146 10A024 102 1 C146 10A024 500 1 C146 10A024 505 1 C146 10A024 810 1 C146 10A025 000 2 C146 10A025 005 2 C146 10A025 009 2 C146 10A025 060 2 C146 10A025 500 2 202 Seite / Page 61, 80 73, 179 73, 179 73, 179 73, 179 84 96 84 34 34 34 97 91 34 52 10 10 10 10 36 36 85 36 98, 100 85 100 36 46 52 12 12 12 12 38 38 99 86, 87 87 38 99, 100 86, 87 100 87 38 52 46 40, 42 26 40, 42 42 40, 42 40, 42 42 52 14, 18 18 14 14 14, 18 Bestell Nr. / Part No. C146 10A025 505 2 C146 10A032 500 10 C146 10A040 000 2 C146 10A040 009 2 C146 10A040 060 2 C146 10A040 500 2 C146 10A042 000 9 C146 10A046 500 10 C146 10A057 000 6 C146 10A057 801 6 C146 10A064 000 2 C146 10A064 005 2 C146 10A064 009 2 C146 10A064 060 2 C146 10A064 500 2 C146 10A064 505 2 C146 10A072 000 9 C146 10A108 000 9 C146 10A108 005 9 C146 10B003 002 4 C146 10B003 102 3 C146 10B004 002 4 C146 10B006 000 1 C146 10B006 002 1 C146 10B006 102 1 C146 10B006 102 3 C146 10B006 102 5 C146 10B006 500 1 C146 10B006 810 1 C146 10B007 000 2 C146 10B007 500 2 C146 10B008 000 2 C146 10B008 500 2 C146 10B010 000 1 C146 10B010 002 1 C146 10B010 002 4 C146 10B010 102 1 C146 10B010 102 3 C146 10B010 102 4 C146 10B010 104 3 C146 10B010 500 1 C146 10B010 500 10 C146 10B010 810 1 C146 10B015 000 2 C146 10B015 009 2 C146 10B015 060 2 C146 10B015 500 2 C146 10B016 000 1 C146 10B016 002 1 C146 10B016 002 3 C146 10B016 002 4 C146 10B016 004 4 C146 10B016 102 1 C146 10B016 102 3 C146 10B016 102 4 C146 10B016 104 3 C146 10B016 104 4 C146 10B016 500 1 C146 10B016 810 1 Seite / Page 18 46 16 16 16 16 26 46 104 104 20, 22 22 20 20 20, 22 22 26 26, 27 27 84 96 84 34 34 34 97 91 34 52 10 10 10 10 36 36 85 36 98, 100 85 100 36 46 52 12 12 12 12 38 38 99 86, 87 87 38 99, 100 86, 87 100 87 38 52 Bestell Nr. / Part No. C146 10B018 500 10 C146 10B024 000 1 C146 10B024 000 9 C146 10B024 002 1 C146 10B024 005 1 C146 10B024 102 1 C146 10B024 500 1 C146 10B024 505 1 C146 10B024 810 1 C146 10B025 000 2 C146 10B025 005 2 C146 10B025 009 2 C146 10B025 060 2 C146 10B025 500 2 C146 10B032 500 10 C146 10B040 000 2 C146 10B040 009 2 C146 10B040 060 2 C146 10B040 500 2 C146 10B042 000 9 C146 10B046 500 10 C146 10B057 000 6 C146 10B057 801 6 C146 10B064 000 2 C146 10B064 005 2 C146 10B064 009 2 C146 10B064 060 2 C146 10B064 500 2 C146 10B064 505 2 C146 10B072 000 9 C146 10B108 000 9 C146 10B108 005 9 C146 10F003 000 4 C146 10F003 004 4 C146 10F003 500 4 C146 10F006 000 1 C146 10F006 003 1 C146 10F006 500 1 C146 10F006 502 1 C146 10F006 502 2 C146 10F006 503 2 C146 10F006 506 1 C146 10F006 506 2 C146 10F006 507 2 C146 10F006 600 1 C146 10F006 602 2 C146 10F006 603 2 C146 10F006 606 1 C146 10F006 606 2 C146 10F006 607 2 C146 10F006 802 2 C146 10F006 803 2 C146 10F006 806 1 C146 10F006 806 2 C146 10F006 807 2 C146 10F010 000 1 C146 10F010 001 1 C146 10F010 002 1 C146 10F010 003 1 Seite / Page 46 40, 42 26 40, 42 42 40, 42 40, 42 42 52 14, 18 18 14 14 14, 18 46 16 16 16 16 26 46 104 104 20, 22 22 20 20 20, 22 22 26 26, 27 27 110, 111 110, 111 110 126, 127 126, 127 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 130, 131 132, 133 134, 135 132, 133 Bestell Nr. / Part No. C146 10F010 090 1 C146 10F010 500 1 C146 10F010 500 2 C146 10F010 501 2 C146 10F010 502 1 C146 10F010 502 2 C146 10F010 503 2 C146 10F010 504 1 C146 10F010 504 2 C146 10F010 505 2 C146 10F010 506 1 C146 10F010 506 2 C146 10F010 507 2 C146 10F010 508 2 C146 10F010 509 2 C146 10F010 600 1 C146 10F010 600 2 C146 10F010 601 2 C146 10F010 602 1 C146 10F010 602 2 C146 10F010 603 2 C146 10F010 604 1 C146 10F010 604 2 C146 10F010 605 2 C146 10F010 606 1 C146 10F010 606 2 C146 10F010 607 2 C146 10F010 608 2 C146 10F010 609 2 C146 10F010 802 1 C146 10F010 802 2 C146 10F010 803 2 C146 10F010 804 1 C146 10F010 804 2 C146 10F010 805 2 C146 10F010 806 1 C146 10F010 806 2 C146 10F010 807 2 C146 10F015 000 2 C146 10F015 003 2 C146 10F015 500 2 C146 10F015 501 2 C146 10F015 600 2 C146 10F015 601 2 C146 10F015 606 2 C146 10F015 607 2 C146 10F015 806 2 C146 10F015 807 2 C146 10F016 000 1 C146 10F016 001 1 C146 10F016 002 1 C146 10F016 003 1 C146 10F016 500 1 C146 10F016 502 1 C146 10F016 504 1 C146 10F016 506 1 C146 10F016 508 2 C146 10F016 509 2 C146 10F016 600 1 Seite / Page 130, 131 130 130 130 132 132 132 134 134 134 132 132 132 134 134 130 130 130 132 132 132 134 134 134 132 132 132 134 134 132 132 132 134 134 134 132 132 132 114, 115 114, 115 116 116 116 116 116 116 116 116 138, 139 140, 141 142, 143 140, 141 138 140 142 140 142 142 138 Amphenol C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. C146 10F016 602 1 C146 10F016 604 1 C146 10F016 606 1 C146 10F016 608 2 C146 10F016 609 2 C146 10F016 802 1 C146 10F016 804 1 C146 10F016 806 1 C146 10F024 000 1 C146 10F024 000 3 C146 10F024 001 1 C146 10F024 002 1 C146 10F024 003 1 C146 10F024 500 1 C146 10F024 500 3 C146 10F024 502 1 C146 10F024 504 1 C146 10F024 506 1 C146 10F024 508 2 C146 10F024 509 2 C146 10F024 600 1 C146 10F024 600 3 C146 10F024 602 1 C146 10F024 604 1 C146 10F024 606 1 C146 10F024 608 2 C146 10F024 609 2 C146 10F024 802 1 C146 10F024 804 1 C146 10F024 806 1 C146 10F025 000 2 C146 10F025 003 2 C146 10F025 500 2 C146 10F025 501 2 C146 10F025 600 2 C146 10F025 601 2 C146 10F025 606 2 C146 10F025 607 2 C146 10F025 806 2 C146 10F025 807 2 C146 10F032 000 4 C146 10F032 002 4 C146 10F032 500 4 C146 10F032 501 4 C146 10F032 600 4 C146 10F032 601 4 C146 10F040 500 2 C146 10F040 501 2 C146 10F040 502 2 C146 10F040 503 2 C146 10F040 504 2 C146 10F040 505 2 C146 10F040 506 2 C146 10F040 507 2 C146 10F040 600 2 C146 10F040 601 2 C146 10F040 602 2 C146 10F040 603 2 C146 10F040 604 2 Amphenol Seite / Page 140 142 140 142 142 140 142 140 146, 147 154, 155 148, 149 150, 151 148, 149 146 154 148 150 148 150 150 146 154 148 150 148 150 150 148 150 148 118, 119 118, 119 120 120 120 120 120 120 120 120 124, 125 124, 125 124 124 124 124 138 138 140 140 142 142 140 140 138 138 140 140 142 Bestell Nr. / Part No. C146 10F040 605 2 C146 10F040 606 2 C146 10F040 607 2 C146 10F040 802 2 C146 10F040 803 2 C146 10F040 804 2 C146 10F040 805 2 C146 10F040 806 2 C146 10F040 807 2 C146 10F064 500 2 C146 10F064 501 2 C146 10F064 502 2 C146 10F064 503 2 C146 10F064 504 2 C146 10F064 505 2 C146 10F064 506 2 C146 10F064 507 2 C146 10F064 600 2 C146 10F064 601 2 C146 10F064 602 2 C146 10F064 603 2 C146 10F064 604 2 C146 10F064 605 2 C146 10F064 606 2 C146 10F064 607 2 C146 10F064 802 2 C146 10F064 803 2 C146 10F064 804 2 C146 10F064 805 2 C146 10F064 806 2 C146 10F064 807 2 C146 10G003 500 4 C146 10G003 600 4 C146 10G003 804 4 C146 10G006 500 1 C146 10G006 501 1 C146 10G006 506 8 C146 10G006 507 8 C146 10G006 556 8 C146 10G006 600 1 C146 10G006 601 1 C146 10G006 606 8 C146 10G006 607 8 C146 10G006 656 8 C146 10G006 804 1 C146 10G006 804 8 C146 10G006 805 1 C146 10G006 805 8 C146 10G010 500 1 C146 10G010 500 4 C146 10G010 500 8 C146 10G010 501 1 C146 10G010 501 4 C146 10G010 501 8 C146 10G010 502 1 C146 10G010 502 8 C146 10G010 503 1 C146 10G010 503 8 C146 10G010 506 1 Seite / Page 142 140 140 140 140 142 142 140 140 146 146 148 148 150 150 148 148 146 146 148 148 150 150 148 148 148 148 150 150 148 148 110 110 110 126 126 126 126 126 126 126 126 126 126 126 126 126 126 130 114 130 130 114 130 134 134 134 134 132 Bestell Nr. / Part No. C146 10G010 506 8 C146 10G010 507 1 C146 10G010 507 8 C146 10G010 550 8 C146 10G010 600 1 C146 10G010 600 4 C146 10G010 600 8 C146 10G010 601 1 C146 10G010 601 4 C146 10G010 601 8 C146 10G010 602 1 C146 10G010 602 8 C146 10G010 603 1 C146 10G010 603 8 C146 10G010 606 1 C146 10G010 606 8 C146 10G010 607 1 C146 10G010 607 8 C146 10G010 650 8 C146 10G010 802 1 C146 10G010 802 8 C146 10G010 803 1 C146 10G010 803 8 C146 10G010 804 1 C146 10G010 804 4 C146 10G010 804 8 C146 10G010 805 1 C146 10G010 805 4 C146 10G010 805 8 C146 10G010 902 8 C146 10G015 500 2 C146 10G015 501 2 C146 10G015 600 2 C146 10G015 601 2 C146 10G015 804 2 C146 10G016 500 1 C146 10G016 500 4 C146 10G016 500 8 C146 10G016 501 1 C146 10G016 501 4 C146 10G016 501 8 C146 10G016 502 1 C146 10G016 502 8 C146 10G016 503 1 C146 10G016 503 8 C146 10G016 506 1 C146 10G016 506 8 C146 10G016 507 1 C146 10G016 507 8 C146 10G016 600 1 C146 10G016 600 4 C146 10G016 600 8 C146 10G016 601 1 C146 10G016 601 8 C146 10G016 602 1 C146 10G016 602 8 C146 10G016 603 1 C146 10G016 603 8 C146 10G016 606 1 Seite / Page 132 132 132 130 130 114 130 130 114 130 134 134 134 134 132 132 132 132 130 130 130 130 130 132 114 132 132 114 132 136 114 114 114 114 114 138 118 138 138 118 138 142 142 142 142 140 140 140 140 138 118 138 138 138 142 142 142 142 140 Bestell Nr. / Part No. C146 10G016 606 8 C146 10G016 607 1 C146 10G016 607 8 C146 10G016 802 1 C146 10G016 802 8 C146 10G016 803 1 C146 10G016 803 8 C146 10G016 804 1 C146 10G016 804 4 C146 10G016 804 8 C146 10G016 805 1 C146 10G016 805 4 C146 10G016 805 8 C146 10G016 902 8 C146 10G024 500 1 C146 10G024 500 3 C146 10G024 500 8 C146 10G024 501 1 C146 10G024 501 8 C146 10G024 502 1 C146 10G024 502 8 C146 10G024 503 1 C146 10G024 503 8 C146 10G024 506 1 C146 10G024 506 8 C146 10G024 507 1 C146 10G024 507 8 C146 10G024 600 1 C146 10G024 600 3 C146 10G024 600 8 C146 10G024 601 1 C146 10G024 601 8 C146 10G024 602 1 C146 10G024 602 8 C146 10G024 603 1 C146 10G024 603 8 C146 10G024 606 1 C146 10G024 606 8 C146 10G024 607 1 C146 10G024 607 8 C146 10G024 802 1 C146 10G024 802 3 C146 10G024 802 8 C146 10G024 803 1 C146 10G024 803 8 C146 10G024 804 1 C146 10G024 804 8 C146 10G024 805 1 C146 10G024 805 8 C146 10G024 903 8 C146 10G024 908 8 C146 10G025 500 2 C146 10G025 501 2 C146 10G025 600 2 C146 10G025 601 2 C146 10G025 804 2 C146 10G032 500 4 C146 10G032 501 4 C146 10G032 600 4 Seite / Page 140 140 140 138 138 138 138 140 118 140 140 118 140 144 146 154 146 146 146 150 150 150 150 148 148 148 148 146 154 146 146 146 150 150 150 150 148 148 148 148 146 154 146 146 146 148 148 148 148 152 152 118 118 118 118 118 122 122 122 203 C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. C146 10G032 601 4 C146 10N003 500 4 C146 10N006 502 1 C146 10N006 502 2 C146 10N006 503 1 C146 10N006 503 2 C146 10N006 506 1 C146 10N006 506 2 C146 10N006 507 1 C146 10N006 507 2 C146 10N006 602 1 C146 10N006 602 2 C146 10N006 603 1 C146 10N006 603 2 C146 10N006 606 1 C146 10N006 606 2 C146 10N006 607 1 C146 10N006 607 2 C146 10N006 702 1 C146 10N006 703 1 C146 10N006 708 1 C146 10N006 709 1 C146 10N006 802 1 C146 10N006 802 2 C146 10N006 803 1 C146 10N006 803 2 C146 10N006 806 1 C146 10N006 806 2 C146 10N006 807 1 C146 10N006 807 2 C146 10N010 500 1 C146 10N010 500 2 C146 10N010 501 1 C146 10N010 501 2 C146 10N010 502 1 C146 10N010 502 2 C146 10N010 503 1 C146 10N010 503 2 C146 10N010 504 1 C146 10N010 504 2 C146 10N010 505 1 C146 10N010 505 2 C146 10N010 506 1 C146 10N010 506 2 C146 10N010 507 1 C146 10N010 507 2 C146 10N010 508 1 C146 10N010 508 2 C146 10N010 509 1 C146 10N010 509 2 C146 10N010 600 1 C146 10N010 600 2 C146 10N010 601 1 C146 10N010 601 2 C146 10N010 602 1 C146 10N010 602 2 C146 10N010 603 1 C146 10N010 603 2 C146 10N010 604 1 204 Seite / Page 122 111 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 131 131 131 131 133 133 133 133 135 135 135 135 133 133 133 133 135 135 135 135 131 131 131 131 133 133 133 133 135 Bestell Nr. / Part No. C146 10N010 604 2 C146 10N010 605 1 C146 10N010 605 2 C146 10N010 606 1 C146 10N010 606 2 C146 10N010 607 1 C146 10N010 607 2 C146 10N010 608 1 C146 10N010 608 2 C146 10N010 609 1 C146 10N010 609 2 C146 10N010 700 1 C146 10N010 701 1 C146 10N010 702 1 C146 10N010 703 1 C146 10N010 708 1 C146 10N010 709 1 C146 10N010 802 1 C146 10N010 802 2 C146 10N010 803 1 C146 10N010 803 2 C146 10N010 804 1 C146 10N010 804 2 C146 10N010 805 1 C146 10N010 805 2 C146 10N010 806 1 C146 10N010 806 2 C146 10N010 807 1 C146 10N010 807 2 C146 10N010 808 1 C146 10N010 809 1 C146 10N015 500 2 C146 10N015 501 2 C146 10N015 600 2 C146 10N015 601 2 C146 10N015 606 2 C146 10N015 607 2 C146 10N015 702 2 C146 10N015 703 2 C146 10N015 708 2 C146 10N015 709 2 C146 10N015 806 2 C146 10N015 807 2 C146 10N016 500 1 C146 10N016 500 2 C146 10N016 501 2 C146 10N016 502 1 C146 10N016 502 2 C146 10N016 503 2 C146 10N016 504 1 C146 10N016 504 2 C146 10N016 505 2 C146 10N016 506 1 C146 10N016 506 2 C146 10N016 507 2 C146 10N016 508 1 C146 10N016 508 2 C146 10N016 509 2 C146 10N016 600 1 Seite / Page 135 135 135 133 133 133 133 135 135 135 135 131 131 133 133 133 133 133 133 133 133 135 135 135 135 133 133 133 133 135 135 117 117 117 117 117 117 117 117 117 117 117 117 139 139 139 141 141 141 143 143 143 141 141 141 143 143 143 139 Bestell Nr. / Part No. C146 10N016 600 2 C146 10N016 601 2 C146 10N016 602 1 C146 10N016 602 2 C146 10N016 603 2 C146 10N016 604 1 C146 10N016 604 2 C146 10N016 605 2 C146 10N016 606 1 C146 10N016 606 2 C146 10N016 607 2 C146 10N016 608 1 C146 10N016 608 2 C146 10N016 609 2 C146 10N016 700 1 C146 10N016 700 2 C146 10N016 701 2 C146 10N016 702 1 C146 10N016 702 2 C146 10N016 703 2 C146 10N016 708 1 C146 10N016 708 2 C146 10N016 709 2 C146 10N016 802 1 C146 10N016 802 2 C146 10N016 803 2 C146 10N016 804 1 C146 10N016 804 2 C146 10N016 805 2 C146 10N016 806 1 C146 10N016 806 2 C146 10N016 807 2 C146 10N016 808 1 C146 10N016 808 2 C146 10N016 809 2 C146 10N024 500 1 C146 10N024 500 2 C146 10N024 500 3 C146 10N024 501 2 C146 10N024 502 1 C146 10N024 502 2 C146 10N024 503 2 C146 10N024 504 1 C146 10N024 504 2 C146 10N024 505 2 C146 10N024 506 1 C146 10N024 506 2 C146 10N024 507 2 C146 10N024 508 1 C146 10N024 508 2 C146 10N024 509 2 C146 10N024 600 1 C146 10N024 600 2 C146 10N024 600 3 C146 10N024 601 2 C146 10N024 602 1 C146 10N024 602 2 C146 10N024 603 2 C146 10N024 604 1 Seite / Page 139 139 141 141 141 143 143 143 141 141 141 143 143 143 139 139 139 141 141 141 141 141 141 141 141 141 143 143 143 141 141 141 143 143 143 147 147 155 147 149 149 149 151 151 151 149 149 149 151 151 151 147 147 155 147 149 149 149 151 Bestell Nr. / Part No. C146 10N024 604 2 C146 10N024 605 2 C146 10N024 606 1 C146 10N024 606 2 C146 10N024 607 2 C146 10N024 608 1 C146 10N024 608 2 C146 10N024 609 2 C146 10N024 700 1 C146 10N024 700 2 C146 10N024 701 2 C146 10N024 702 1 C146 10N024 702 2 C146 10N024 703 2 C146 10N024 708 1 C146 10N024 708 2 C146 10N024 709 2 C146 10N024 802 1 C146 10N024 802 2 C146 10N024 803 2 C146 10N024 804 1 C146 10N024 804 2 C146 10N024 805 2 C146 10N024 806 1 C146 10N024 806 2 C146 10N024 807 2 C146 10N024 808 1 C146 10N024 808 2 C146 10N024 809 2 C146 10N025 500 2 C146 10N025 501 2 C146 10N025 600 2 C146 10N025 601 2 C146 10N025 606 2 C146 10N025 607 2 C146 10N025 702 2 C146 10N025 703 2 C146 10N025 708 2 C146 10N025 709 2 C146 10N025 806 2 C146 10N025 807 2 C146 10N032 500 4 C146 10N032 501 4 C146 10N032 550 4 C146 10N032 600 4 C146 10N032 601 4 C146 10N032 650 4 C146 10R003 500 4 C146 10R003 600 4 C146 10R003 804 4 C146 10R006 506 1 C146 10R006 506 8 C146 10R006 507 1 C146 10R006 556 8 C146 10R006 606 1 C146 10R006 606 8 C146 10R006 607 1 C146 10R006 656 1 C146 10R006 656 8 Seite / Page 151 151 149 149 149 151 151 151 147 147 147 149 149 149 149 149 149 149 149 149 151 151 151 149 149 149 151 151 151 121 121 121 121 121 121 121 121 121 121 121 121 125 125 125 125 125 125 111 111 111 127 127 127 127 127 127 127 127 127 Amphenol C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. C146 10R006 804 1 C146 10R006 804 8 C146 10R006 805 1 C146 10R006 854 8 C146 10R010 500 1 C146 10R010 500 4 C146 10R010 500 8 C146 10R010 502 1 C146 10R010 502 8 C146 10R010 506 1 C146 10R010 506 8 C146 10R010 550 1 C146 10R010 550 4 C146 10R010 550 8 C146 10R010 552 1 C146 10R010 552 8 C146 10R010 556 1 C146 10R010 556 8 C146 10R010 600 1 C146 10R010 600 4 C146 10R010 600 8 C146 10R010 601 8 C146 10R010 602 1 C146 10R010 602 8 C146 10R010 603 8 C146 10R010 606 1 C146 10R010 606 8 C146 10R010 607 1 C146 10R010 607 8 C146 10R010 650 1 C146 10R010 650 4 C146 10R010 650 8 C146 10R010 652 1 C146 10R010 652 8 C146 10R010 656 1 C146 10R010 656 8 C146 10R010 802 1 C146 10R010 802 8 C146 10R010 803 1 C146 10R010 803 8 C146 10R010 804 1 C146 10R010 804 4 C146 10R010 804 8 C146 10R010 805 1 C146 10R010 805 8 C146 10R010 852 1 C146 10R010 852 8 C146 10R010 854 1 C146 10R010 854 4 C146 10R010 854 8 C146 10R010 902 8 C146 10R015 500 2 C146 10R015 550 2 C146 10R015 600 2 C146 10R015 650 2 C146 10R015 804 2 C146 10R015 854 2 C146 10R016 500 1 C146 10R016 500 4 Amphenol Seite / Page 127 127 127 127 131 115 131 135 135 133 133 131 115 131 135 135 133 133 131 115 131 131 135 135 135 133 133 133 133 131 115 131 135 135 133 133 131 131 131 131 133 115 133 133 133 131 131 133 115 133 137 115 115 115 115 115 115 139 119 Bestell Nr. / Part No. C146 10R016 500 8 C146 10R016 501 8 C146 10R016 502 1 C146 10R016 502 8 C146 10R016 503 8 C146 10R016 506 1 C146 10R016 506 8 C146 10R016 507 8 C146 10R016 550 1 C146 10R016 550 4 C146 10R016 550 8 C146 10R016 552 1 C146 10R016 552 8 C146 10R016 556 1 C146 10R016 556 8 C146 10R016 600 1 C146 10R016 600 4 C146 10R016 600 8 C146 10R016 601 8 C146 10R016 602 1 C146 10R016 602 8 C146 10R016 603 8 C146 10R016 606 1 C146 10R016 606 8 C146 10R016 607 8 C146 10R016 650 1 C146 10R016 650 4 C146 10R016 650 8 C146 10R016 652 1 C146 10R016 652 8 C146 10R016 656 1 C146 10R016 656 8 C146 10R016 802 1 C146 10R016 802 8 C146 10R016 803 8 C146 10R016 804 1 C146 10R016 804 4 C146 10R016 804 8 C146 10R016 805 8 C146 10R016 852 1 C146 10R016 852 8 C146 10R016 854 1 C146 10R016 854 4 C146 10R016 854 8 C146 10R016 902 8 C146 10R016 910 8 C146 10R024 500 1 C146 10R024 500 3 C146 10R024 500 8 C146 10R024 501 8 C146 10R024 502 1 C146 10R024 502 8 C146 10R024 503 8 C146 10R024 506 1 C146 10R024 506 8 C146 10R024 507 8 C146 10R024 550 1 C146 10R024 550 3 C146 10R024 550 8 Seite / Page 139 139 143 143 143 141 141 141 139 119 139 143 143 141 141 139 119 139 139 143 143 143 141 141 141 139 119 139 143 143 141 141 139 139 139 141 119 141 141 139 139 141 119 141 145 145 147 155 147 147 151 151 151 149 149 149 147 155 147 Bestell Nr. / Part No. C146 10R024 552 1 C146 10R024 552 8 C146 10R024 556 1 C146 10R024 556 8 C146 10R024 600 1 C146 10R024 600 3 C146 10R024 600 8 C146 10R024 601 8 C146 10R024 602 1 C146 10R024 602 8 C146 10R024 603 8 C146 10R024 606 1 C146 10R024 606 8 C146 10R024 607 8 C146 10R024 650 1 C146 10R024 650 3 C146 10R024 650 8 C146 10R024 652 1 C146 10R024 652 8 C146 10R024 656 1 C146 10R024 656 8 C146 10R024 802 1 C146 10R024 802 3 C146 10R024 802 8 C146 10R024 803 8 C146 10R024 804 1 C146 10R024 804 8 C146 10R024 805 8 C146 10R024 852 1 C146 10R024 852 3 C146 10R024 852 8 C146 10R024 854 1 C146 10R024 854 8 C146 10R024 903 8 C146 10R024 908 8 C146 10R024 909 8 C146 10R025 500 2 C146 10R025 550 2 C146 10R025 600 2 C146 10R025 650 2 C146 10R025 804 2 C146 10R025 854 2 C146 10Z000 002 8 C146 10Z001 001 8 C146 10Z002 001 8 C146 10Z003 100 4 C146 10Z006 100 1 C146 10Z006 200 1 C146 10Z010 100 1 C146 10Z010 200 1 C146 10Z015 100 2 C146 10Z016 100 1 C146 10Z016 200 1 C146 10Z024 100 1 C146 10Z024 200 1 C146 10Z025 100 2 C146 11F006 001 8 C146 11F006 901 8 C146 11F006 902 8 Seite / Page 151 151 149 149 147 155 147 147 151 151 151 149 149 149 147 155 147 151 151 149 149 147 155 147 147 149 149 149 147 155 147 149 149 153 153 153 119 119 119 119 119 119 80 80 80 110, 111 128, 129 128, 129 136, 137 136, 137 116, 117 144, 145 144, 145 152, 153 152, 153 120, 121 160, 161 160, 161 160, 161 Bestell Nr. / Part No. C146 11F010 000 8 C146 11F010 901 8 C146 11F010 902 8 C146 11F016 000 8 C146 11F016 901 8 C146 11F016 902 8 C146 11F024 000 8 C146 11F024 901 8 C146 11F024 902 8 C146 11G006 506 1 C146 11G006 506 8 C146 11G006 507 1 C146 11G006 507 8 C146 11G006 556 1 C146 11G006 606 1 C146 11G006 606 8 C146 11G006 607 1 C146 11G006 607 8 C146 11G010 500 1 C146 11G010 500 8 C146 11G010 501 1 C146 11G010 501 8 C146 11G010 600 1 C146 11G010 600 8 C146 11G010 601 1 C146 11G010 601 8 C146 11G016 500 1 C146 11G016 500 8 C146 11G016 501 1 C146 11G016 501 8 C146 11G016 600 1 C146 11G016 600 8 C146 11G016 601 1 C146 11G016 601 8 C146 11G024 500 1 C146 11G024 500 8 C146 11G024 501 1 C146 11G024 501 8 C146 11G024 600 1 C146 11G024 600 8 C146 11G024 601 1 C146 11G024 601 8 C146 11R006 506 1 C146 11R006 506 8 C146 11R006 507 1 C146 11R006 556 1 C146 11R006 556 8 C146 11R006 606 1 C146 11R006 606 8 C146 11R006 607 1 C146 11R006 656 8 C146 11R010 500 1 C146 11R010 500 8 C146 11R010 550 1 C146 11R010 550 8 C146 11R010 600 1 C146 11R010 600 8 C146 11R010 601 1 C146 11R010 601 8 Seite / Page 162, 163 162, 163 162, 163 164, 165 164, 165 164, 165 166, 167 166, 167 166, 167 160 160 160 160 160 160 160 160 160 162 162 162 162 162 162 162 162 164 164 164 164 164 164 164 164 166 166 166 166 166 166 166 166 161 161 161 161 161 161 161 161 161 163 163 163 163 163 163 163 163 205 C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. C146 11R010 650 1 C146 11R010 650 8 C146 11R016 500 1 C146 11R016 500 8 C146 11R016 501 8 C146 11R016 550 1 C146 11R016 550 8 C146 11R016 600 1 C146 11R016 600 8 C146 11R016 601 8 C146 11R016 650 1 C146 11R016 650 8 C146 11R024 500 1 C146 11R024 500 8 C146 11R024 501 8 C146 11R024 550 1 C146 11R024 550 8 C146 11R024 600 1 C146 11R024 600 8 C146 11R024 601 8 C146 11R024 650 1 C146 11R024 650 8 C146 16F003 000 4 C146 16N003 500 4 C146 16R003 500 4 C146 16R003 600 4 C146 21G006 501 1 C146 21G006 506 8 C146 21G010 500 1 C146 21G010 500 8 C146 21G010 600 1 C146 21G010 600 8 C146 21G016 500 1 C146 21G016 501 8 C146 21G016 600 1 C146 21G016 601 8 C146 21G024 500 1 C146 21G024 501 8 C146 21G024 600 1 C146 21G024 601 8 C146 21R006 506 1 C146 21R006 506 8 C146 21R006 507 1 C146 21R006 556 8 C146 21R006 606 1 C146 21R006 606 8 C146 21R006 607 1 C146 21R006 656 1 C146 21R006 656 8 C146 21R006 804 1 C146 21R006 804 8 C146 21R006 805 1 C146 21R006 854 8 C146 21R010 500 1 C146 21R010 500 4 C146 21R010 500 8 C146 21R010 502 1 C146 21R010 502 8 C146 21R010 506 1 206 Seite / Page 163 163 165 165 165 165 165 165 165 165 165 165 167 167 167 167 167 167 167 167 167 167 111 111 111 111 128 128 136 136 136 136 144 144 144 144 152 152 152 152 127 127 127 127 127 127 127 127 127 127 127 127 127 131, 137 115 131, 137 135 135 133 Bestell Nr. / Part No. C146 21R010 506 8 C146 21R010 550 1 C146 21R010 550 4 C146 21R010 550 8 C146 21R010 552 1 C146 21R010 552 8 C146 21R010 556 1 C146 21R010 556 8 C146 21R010 600 1 C146 21R010 600 4 C146 21R010 600 8 C146 21R010 601 8 C146 21R010 602 1 C146 21R010 602 8 C146 21R010 603 8 C146 21R010 606 1 C146 21R010 606 8 C146 21R010 607 1 C146 21R010 607 8 C146 21R010 650 1 C146 21R010 650 4 C146 21R010 650 8 C146 21R010 652 1 C146 21R010 652 8 C146 21R010 656 1 C146 21R010 656 8 C146 21R010 802 1 C146 21R010 802 8 C146 21R010 803 1 C146 21R010 803 8 C146 21R010 804 1 C146 21R010 804 4 C146 21R010 804 8 C146 21R010 805 1 C146 21R010 805 8 C146 21R010 852 1 C146 21R010 852 8 C146 21R010 854 1 C146 21R010 854 4 C146 21R010 854 8 C146 21R010 902 8 C146 21R015 500 2 C146 21R015 550 2 C146 21R015 600 2 C146 21R015 650 2 C146 21R015 804 2 C146 21R015 854 2 C146 21R016 500 1 C146 21R016 500 4 C146 21R016 500 8 C146 21R016 501 8 C146 21R016 502 1 C146 21R016 502 8 C146 21R016 503 8 C146 21R016 506 1 C146 21R016 506 8 C146 21R016 507 8 C146 21R016 550 1 C146 21R016 550 4 Seite / Page 133 131, 137 115 131, 137 135 135 133 133 131, 137 115 131, 137 131, 137 135 135 135 133 133 133 133 131, 137 115 131, 137 135 135 133 133 131 131 131 131 133 115 133 133 133 131 131 133 115 133 77 115 115 115 115 115 115 139, 145 119 139, 145 139, 145 143 143 143 141 141 141 139, 145 119 Bestell Nr. / Part No. C146 21R016 550 8 C146 21R016 552 1 C146 21R016 552 8 C146 21R016 556 1 C146 21R016 556 8 C146 21R016 600 1 C146 21R016 600 4 C146 21R016 600 8 C146 21R016 601 8 C146 21R016 602 1 C146 21R016 602 8 C146 21R016 603 8 C146 21R016 606 1 C146 21R016 606 8 C146 21R016 607 8 C146 21R016 650 1 C146 21R016 650 4 C146 21R016 650 8 C146 21R016 652 1 C146 21R016 652 8 C146 21R016 656 1 C146 21R016 656 8 C146 21R016 802 1 C146 21R016 802 8 C146 21R016 803 8 C146 21R016 804 1 C146 21R016 804 4 C146 21R016 804 8 C146 21R016 805 8 C146 21R016 852 1 C146 21R016 852 8 C146 21R016 854 1 C146 21R016 854 4 C146 21R016 854 8 C146 21R016 910 8 C146 21R024 500 1 C146 21R024 500 8 C146 21R024 501 8 C146 21R024 502 1 C146 21R024 502 8 C146 21R024 503 8 C146 21R024 506 1 C146 21R024 506 8 C146 21R024 507 8 C146 21R024 550 1 C146 21R024 550 8 C146 21R024 552 1 C146 21R024 552 8 C146 21R024 556 1 C146 21R024 556 8 C146 21R024 600 1 C146 21R024 600 8 C146 21R024 601 8 C146 21R024 602 1 C146 21R024 602 8 C146 21R024 603 8 C146 21R024 606 1 C146 21R024 606 8 C146 21R024 607 8 Seite / Page 139, 145 143 143 141 141 139, 145 119 139, 145 139, 145 143 143 143 141 141 141 139, 145 119 139, 145 143 143 141 141 139 139 139 141 119 141 141 139 139 141 119 141 77 147, 153 147, 153 147, 153 151 151 151 149 149 149 147 147, 153 151 151 149 149 147, 153 147, 153 147, 153 151 151 151 149 149 149 Bestell Nr. / Part No. C146 21R024 650 1 C146 21R024 650 8 C146 21R024 652 1 C146 21R024 652 8 C146 21R024 656 1 C146 21R024 656 8 C146 21R024 802 1 C146 21R024 802 8 C146 21R024 803 8 C146 21R024 804 1 C146 21R024 804 8 C146 21R024 805 8 C146 21R024 852 1 C146 21R024 852 8 C146 21R024 854 1 C146 21R024 854 8 C146 21R024 913 8 C146 21R025 500 2 C146 21R025 550 2 C146 21R025 600 2 C146 21R025 650 2 C146 21R025 804 2 C146 21R025 854 2 C146 21R032 500 4 C146 21R032 501 4 C146 21R032 502 4 C146 21R032 503 4 C146 21R032 550 4 C146 21R032 552 4 C146 21R032 600 4 C146 21R032 601 4 C146 21R032 602 4 C146 21R032 603 4 C146 21R032 650 4 C146 21R032 652 4 C146 21R032 802 4 C146 21R032 803 4 C146 21R032 852 4 C146 30F003 000 4 C146 30F003 004 4 C146 30F003 500 4 C146 30G003 500 4 C146 30G003 600 4 C146 30G003 804 4 C146 30N003 500 4 C146 30R003 500 4 C146 30R003 600 4 C146 30R003 804 4 C146 30Z003 100 4 C146 31N003 500 4 C146 A00 001 E8 C146 A03 001 E8 C146 A03 501 E8 C146 A03 801 E8 C146 A05 001 E8 C146 A10 001 E8 C146 A20 001 G8 C146 B00 001 E8 C146 B03 001 E8 Seite / Page 147, 153 147, 153 151 151 149 149 147 147 147 149 149 149 147 147 149 149 77 119 119 119 119 119 119 123 123 123 123 123 123 123 123 123 123 123 123 123 123 123 112, 113 112, 113 112 112 112 112 113 113 113 113 112, 113 113 80 58, 69 58, 73 58, 75 58, 67 58 58, 61 80 58, 69 Amphenol C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. Seite / Page C146 B03 501 E8 58, 73 C146 B03 801 E8 58, 75 C146 B05 001 E8 58, 67 C146 B10 001 E8 58 C146 B20 001 G8 58, 61 C146 C04 001 E8 58, 71 C146 C05 001 E8 58, 71 C146 C05 801 E8 58, 71 C146 C10 001 G8 58, 63 C146 D04 001 E8 58, 71 C146 D05 001 E8 58, 71 C146 D05 801 E8 58, 71 C146 D10 001 E8 58, 63 C146 E12 001 E8 59, 77 C146 F12 001 G8 59, 77 C146 G01 014 G8 59, 79 C146 G01 024 G8 59, 79 C146 G02 014 G8 59, 79 C146 G02 024 G8 59, 79 C146 H01 034 G8 59, 79 C146 H01 044 G8 59, 79 C146 H02 034 G8 59, 79 C146 H02 044 G8 59, 79 C146 N32 009 G1 176 C146 N32 015 G1 176 C146 N32 015 G2 176 C146 N32 025 G1 176 C146 N32 025 G2 176 C146 N32 037 G1 176 C146 N32 050 G1 176 C146 N33 009 G1 176 C146 N33 015 G1 176 C146 N33 025 G1 176 C146 N33 037 G1 176 C146 N33 050 G1 176 C146 P06 001 G8 59 C146 P06 002 G8 59 C146 P10 001 G8 59 C146 P10 002 G8 59 C146 P16 001 G8 59 C146 P16 002 G8 59 C146 P24 001 G8 59 C146 P24 002 G8 59 C146 P24 101 G8 59 C146 P24 102 G8 59 C146 S06 001 G8 59 C146 S06 002 G8 59 C146 S10 001 G8 59 C146 S10 002 G8 59 C146 S16 001 G8 59 C146 S16 002 G8 59 C146 S24 001 G8 59 C146 S24 002 G8 59 C146 S24 101 G8 59 C146 S24 102 G8 59 FG 0200 146 1 44, 71, 80 FG 0300 146 1 24, 63, 65, 80 FG 0300 146 3 69, 73, 75, 80 FG 0300 146 4 67, 80 Amphenol Bestell Nr. / Part No. Seite / Page FG 0300 146 (7) 47 FG 1000 146 61, 63, 65, 67, 69, 71, 73, 75, 80 FN01 010 0130 (2) 61 FN01 010 0131 (2) 61 FN02 010 0130 (2) 61 FN02 010 0131 (2) 61 HN01 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN01 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN01 025 0001 (1) 35, 37, 39, 41, 43, 71 HN01 025 0007 (1) 105 HN01 025 0008 (1) 105 HN01 025 0010 (1) 35, 37, 39, 41, 43, 71 HN02 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN02 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 HN02 025 0001 (1) 35, 37, 39, 41, 43, 71, 105 HN02 025 0010 (1) 35, 37, 39, 41, 43, 71, 105 N01 016 0040 8 179 N02 016 0040 8 179 N06 080 0003 1 176 N06 080 0003 2 176 N06 080 0003 3 176 N06 080 0003 4 176 N07 045 0001 L 176 N15 006 000 9Z 69, 75 N15 010 000 7Z 69, 75 N16 011 0010 171 Bestell Nr. / Part No. Seite / Page Bestell Nr. / Part No. N16 013 0010 171 N16 016 0010 171 N16 021 0010 171 N16 029 0010 171 T 1860 000 106 T 1860 010 106 T 1861 002 106 T 1861 012 106 T 1862 001 106 TA 0000 24, 44, 63, 65, 67, 69, 71, 73, 75 TA 0000 121 71 TA 0000 124 67, 69, 75 TA 0000 141 24, 44, 63, 71 TA 0000 144 67, 69, 75 TA 0000 163 24, 44, 63, 71 TA 0000 180 69, 75 TA 0000 184 65 TA 0000 202 24, 63 TA 0000 401 73 TA 0000 402 73 TA 0001 146 000 1 24, 63 TA 0002 146 000 1 24, 63 TA 0003 146 000 1 71 TA 0004 146 000 1 44, 71 TA 0005 146 000 3 44, 71 TA 0007 146 000 3 24, 63 TA 0010 146 000 1 65 TA 0010 146 000 2 67, 75 TA 0010 146 000 3 67 TA 0010 146 000 4 69, 75 TA 0010 146 000 5 69 TA 0100 146 24, 63 TA 0200 146 61 TA 0500 24 TB 0200 146 69, 75 TB 0500 146 65 TB 0600 146 44 TN01 010 0130 (2) 61 TN01 010 0131 (2) 61 TN01 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN01 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN01 025 0001 (1) 35, 37, 39, 41, 43, 71 TN01 025 0007 (1) 105 TN01 025 0008 (1) TN01 025 0010 (1) Seite / Page 105 35, 37, 39, 41, 43, 71 TN01 025 0043 (1) 71 TN02 010 0130 (2) 61 TN02 010 0131 (2) 61 TN02 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN02 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 TN02 025 0001 (1) 35, 37, 39, 41, 43, 71, 105 TN02 025 0010 (1) 35, 37, 39, 41, 43, 71, 105 TN02 025 0043 (1) 71 VN01 010 0130 (2) 61 VN01 010 0131 (2) 61 VN01 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN01 016 0002 (2) 11, 13, 15, 19, 21, 23, 63 VN01 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN01 016 0003 (2) 11, 13, 15, 19, 21, 23, 63 VN01 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN01 016 0005 (2) 11, 13, 15, 19, 21, 23, 63 VN01 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN01 016 0016 (1) 11, 13, 15, 1 7, 19, 21, 23, 63 VN01 016 0024 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN01 016 0024 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN01 016 0025 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN01 016 0025 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN01 016 0026 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN01 016 0026 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN01 016 0027 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 207 C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. Seite / Page VN01 016 0027 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN01 016 0028 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN01 016 0028 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN01 016 0040 (8) X 65 VN01 025 0001 (101) 35, 37, 71 VN01 025 0001(101) 39, 41, 43 VN01 025 0001 (102) 35, 37, 39, 41, 43, 71 VN01 025 0007 (101) 105 VN01 025 0008 (101) 105 VN01 025 0010 (101) 35, 37, 71 VN01 025 0010(101) 39, 41, 43 VN01 025 0010 (102) 35, 37, 39, 41, 43, 71 VN01 025 0029 (1)C 67, 178 VN01 025 0029 (2)C 67 VN01 025 0030 (1)C 67, 178 VN01 025 0030 (2)C 67 VN01 025 0031 (1)C 67, 178 VN01 025 0031 (2)C 67 VN01 025 0032 (1)C 67, 178 VN01 025 0032 (2)C 67 VN01 025 0033 (1)C 67, 178 VN01 025 0033 (2)C 67 VN01 025 0035 (1)C 35, 37, 39, 41, 43, 47, 178 VN01 025 0035 (2)C 35, 37, 39, 41, 43, 47 VN01 025 0036 (1)C 35, 37, 39, 41, 43, 47, 178 VN01 025 0036 (2)C 35, 37, 39, 41, 43, 47 VN01 025 0037 (1)C 35, 37, 39, 41, 43, 47, 178 VN01 025 0037 (2)C 35, 37, 39, 41, 43, 47 VN01 025 0038 (1)C 35, 37, 39, 41, 43, 47, 178 VN01 025 0038 (2)C 35, 37, 39, 41, 43, 47 VN01 025 0039 (1)C 35, 37, 39, 41, 43, 47, 178 VN01 025 0039 (2)C 35, 37, 39, 41, 43, 47 VN01 025 0043 (1) 71 VN01 036 0001 (1)C 69, 75, 178 VN01 036 0002 (1)C 69, 75, 178 VN01 036 0003 (1)C 69, 75, 178 VN01 036 0004 (1)C 69, 75, 178 VN01 036 0005 (1)C 69, 75, 178 VN02 010 0130 (2) 61 VN02 010 0131 (2) 61 VN02 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 208 Bestell Nr. / Part No. Seite / Page VN02 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 VN02 016 0024 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN02 016 0024 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN02 016 0025 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN02 016 0025 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN02 016 0026 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN02 016 0026 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN02 016 0027 (1)C 11, 13, 15, 17, 19, 21, 23, 27, 65, 178 VN02 016 0027 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN02 016 0028 (1)C 11, 13, 15, 17, 19, 23, 27, 65, 178 VN02 016 0028 (2)C 11, 13, 15, 17, 19, 21, 23, 27, 65 VN02 016 0040 (8) X 65 VN02 025 0001 (101) 35, 37, 39, 41, 43, 71, 105 VN02 025 0001 (102) 35, 37, 71 VN02 025 0001(102) 39, 41, 43 VN02 025 0010 (101) 35, 37, 39, 41, 43, 71, 105 VN02 025 0010 (102) 35, 37, 71 VN02 025 0010(102) 39, 41, 43 VN02 025 0029 (1)C 67, 178 VN02 025 0029 (2)C 67 VN02 025 0030 (1)C 67, 178 VN02 025 0030 (2)C 67 VN02 025 0031 (1)C 67, 178 VN02 025 0031 (2)C 67 VN02 025 0032 (1)C 67, 178 VN02 025 0032 (2)C 67 VN02 025 0033 (1)C 67, 178 VN02 025 0033 (2)C 67 VN02 025 0035 (1)C 35, 37, 39, 41, 43, 47, 178 VN02 025 0035 (2)C 35, 37, 39, 41, 43, 47 VN02 025 0036 (1)C 35, 37, 39, 41, 43, 47, 178 VN02 025 0036 (2)C 35, 37, 39, 41, 43, 47 Bestell Nr. / Part No. Seite / Page VN02 025 0037 (1)C 35, 37, 39, 41, 43, 47, 178 VN02 025 0037 (2)C 35, 37, 39, 41, 43, 47 VN02 025 0038 (1)C 35, 37, 39, 41, 43, 47, 178 VN02 025 0038 (2)C 35, 37, 39, 41, 43, 47 VN02 025 0039 (1)C 35, 37, 39, 41, 43, 47, 178 VN02 025 0039 (2)C 35, 37, 39, 41, 43, 47 VN02 025 0043 (1) 71 VN02 036 0001 (1)C 69, 75, 178 VN02 036 0002 (1)C 69, 75, 178 VN02 036 0003 (1)C 69, 75, 178 VN02 036 0004 (1)C 69, 75, 178 VN02 036 0005 (1)C 69, 75, 178 VN03 030 0020 174 VN03 030 0021 174 VN03 030 3000 X 174 VN13 040 0008 (1) X 174 VN13 040 0009 (1) X 174 VN16 020 0113 (1) X 172 VN16 025 0113 (1) X 172 VN16 032 0113 (1) X 172 VN16 040 0113 (1) X 172 VN16 110 0004 V 171 VN16 110 0013 X 170 VN16 110 0014 X 170 VN16 110 0026 X 173 VN16 110 0027 X 172 VN16 110 0028 X 171 VN16 110 0029 X 171 VN16 135 0002 V 171 VN16 135 0003 V 171 VN16 135 0013 X 170 VN16 135 0014 X 170 VN16 135 0026 X 173 VN16 135 0027 X 172 VN16 135 0028 X 171 VN16 135 0029 X 171 VN16 160 0002 V 171 VN16 160 0003 V 171 VN16 160 0013 X 170 VN16 160 0014 X 170 VN16 160 0026 X 173 VN16 160 0027 X 172 VN16 160 0028 X 171 VN16 160 0029 X 171 VN16 160 0102 V 171 VN16 160 0126 X 173 VN16 160 0127 X 172 VN16 200 0102 V 171 VN16 200 0103 V 171 VN16 200 0114 X 170 VN16 200 0126 X 173 VN16 200 0127 X 172 VN16 210 0002 V 171 Bestell Nr. / Part No. Seite / Page VN16 210 0003 V 171 VN16 210 0013 X 170 VN16 210 0014 X 170 VN16 210 0026 X 173 VN16 210 0027 X 172 VN16 210 0028 X 171 VN16 210 0029 X 171 VN16 250 0102 V 171 VN16 250 0103 V 171 VN16 250 0114 X 170 VN16 250 0126 X 173 VN16 250 0127 X 172 VN16 250 0131 V 77 VN16 290 0002 V 171 VN16 290 0003 V 171 VN16 290 0013 X 170 VN16 290 0014 X 170 VN16 290 0026 X 173 VN16 290 0027 X 172 VN16 290 0028 X 171 VN16 290 0029 X 171 VN16 320 0102 V 171 VN16 320 0103 V 171 VN16 320 0114 X 170 VN16 320 0126 X 173 VN16 320 0127 X 172 VN16 360 0013 X 170 VN16 360 0014 X 170 VN16 400 0114 X 170 VN16 400 0126 X 173 VN16 400 0127 X 172 VN16 420 0013 X 170 VN16 420 0014 X 170 VN16 500 0114 X 170 VN17 050 0004 (1) 174 VN17 050 0004 (101) 174 ZN01 010 0130 (2) 61 ZN01 010 0131 (2) 61 ZN01 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN01 025 0001 (1) 35, 37, 39, 41, 43, 71 ZN01 025 0001 (2) 35, 37, 39, 41, 43, 71 ZN01 025 0007 (1) 105 Amphenol C 146 Bestellnummernverzeichnis Summary of Part Numbers Bestell Nr. / Part No. Seite / Page Bestell Nr. / Part No. Seite / Page Bestell Nr. / Part No. Seite / Page Bestell Nr. / Part No. Seite / Page ZN01 025 0008 (1) ZN01 025 0010 (1) 105 35, 37, 39, 41, 43, 71 ZN01 025 0010 (2) 35, 37, 39, 41, 43, 71 ZN02 010 0130 (2) 61 ZN02 010 0131 (2) 61 ZN02 016 0002 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0002 (2) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0003 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0003 (2) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0005 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0005 (2) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0015 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 016 0016 (1) 11, 13, 15, 17, 19, 21, 23, 63 ZN02 025 0001 (1) 35, 37, 39, 41, 43, 71, 105 ZN02 025 0001 (2) 35, 37, 39, 41, 43, 71 ZN02 025 0010 (1) 35, 37, 39, 41, 43, 71, 105 ZN02 025 0010 (2) 35, 37, 39, 41, 43, 71 Amphenol 209 210 Amphenol Amphenol 211 ATE 2040 E 0112 / 500 0411 Printed on chlorin-free bleached paper, specifications may be changed without notice. Copyright by Amphenol-Tuchel Electronics GmbH, Germany International Argentina Amphenol Argentina Av. Callao 930 2nd Floor Office B "Plaza" C 1023 AAP Buenos Aires Phone +54 11 4815 68 86 www.amphenol.com.ar Australia Amphenol Australia Pty. Ltd. 2 Fiveways Blvd Keysborough Victoria 31 73 Phone +61 3 8796 8888 www.amphenol.com.au Brazil Amphenol do Brasil Ltda. Rua Diogo Moreira 132, 20th Floor CEP 05423-101 Sao Paulo SP Phone +55 11 3815 1003 www.amphenol.com.br China Amphenol-Tuchel Electronics China Branch 20 Tianshan Road Changzhou 213022 Phone +86 0519 5110301 www.amphenol.info France Amphenol Socapex S.A.S. 948, Promenade de l`Arve, BP 29 Thyez Cedex, 74311 Phone +33 4 5089 2800 www.amphenol-socapex.com Germany Amphenol-Tuchel Electronics GmbH August-Haeusser-Str. 10 74080 Heilbronn Phone +49 7131 929-0 www.amphenol.de India Amphenol Interconnect India Pvt Ltd 105, Bhosari Industrial Area Pune - 411 026 Phone +91 20 27120481 www.amphenol-in.com Italy Amphenol-Tuchel Italy Via Barbaiana n. 5 20020 Lainate (MI) Phone +39 02 932 541 www.amphenol.info Korea Amphenol DaeShin Elect and Precision Co.,Ltd 558 Songnae-Dong, Sosa-Gu Bucheon-City, Kyunggi-Do Korea 422-130 Phone +82 32 610 3800 www.amphenol.co.kr Mexico Amphenol Mexico Prolongacion Reforma 61 - 6 B2 Col. Paseo de las Lomas C.P. 01330 Mexico D.F. Phone +52 55 5258 9984 www.amphenolmexico.com Singapore Asia Pacific Sales Operations 72 Bendemeer Rd, No.03-32/33 Hiap Huat House, Luzerne, 339941 Singapore Phone +65 6294 2128 www.amphenol.com South Africa Amphenol International Ltd Chislehurston 30 Impala Road 2196 Chislehurston Sandton, 2146 Phone +27 11 7839517 www.amphenol.co.za Taiwan Amphenol East Asia Limited-Taiwan 5F, No 361, Fusing 1st Rd Gueishan Township, Taoyuan County 333 Phone +886 3 2647 200 www.amphenol.com Turkey Amphenol Turkey Sun Plaza Kat: 15 Maslak Mah. Bilim Sok.No:15 34398 Sisli - Istanbul Phone: +90 212 367 9220 www.amphenol.com.tr United Kingdom Amphenol Limited Thanet Way,Whitstable Kent, CT53JF Phone +44 1227 773 200 www.amphenol.co.uk USA Amphenol-Tuchel Electronics 6900 Haggerty Road Suite 200 Canton, Michigan 48187 Phone +1 734 4516400 www.amphenol.info Amphenol Corporation Corporate Headquarters 358 Hall Avenue Wallingford, CT 06492 Phone +1 877 267 4366 Phone +1 2 03 2 65 89 00 www.amphenol.com Spain Amphenol Espana Edificio Burgosol, Oficina 55 C/Comunidad de Madrid, 35 bis Las Rozas (Madrid), 28230 Phone +34 91 64 07302 www.amphenol.com More Amphenol companies can be found here: www.amphenol.com Important Notice All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding; particularly the information does not constitute or provide any legal guaranties ("Beschaffenheitsgarantie" or "Haltbarkeitsgarantie"). We reserve the right to change the design due to improvement in quality, development or production requirements. This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code). Your engineering sales representative: Amphenol Amphenol-Tuchel Electronics GmbH August-Hausser- Str. 10 . D-74080 Heilbronn . Germany . Phone +49(0)7131 929-0 . Fax +49(0)7131 929-486 * www.amphenol.info 212 Amphenol