All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 1 |
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
MK-Q-B-P-D-031809-06-6
General Description
The DSC8002 is a programmable MEMS based
PureSilicon™ Oscillator. Using the DragonFly™
or TimeFlash™ handheld programmer, the end
user can program the DSC8002 within seconds
to any frequency from 1 to 150MHz in
increments of 100Hz (up to four decimal point
resolution). The nominal operational range
spans from 1.8 to 3.3 Volts, without any need
for additional external components, providing
ease of use and flexibility in multi-voltage
applications.
The DSC8002 incorporates an all silicon
resonator that is extremely robust and nearly
immune to stress related fractures, common to
crystal based oscillators. Without sacrificing the
performance and stability required of today’s
systems, a crystal-less design allows for a
higher level of reliability, making the DSC8002
ideal for rugged, industrial, and portable
applications where stress, shock, and vibration
can damage quartz crystal based systems.
Available in industry standard packages, the
DSC8002 can be “dropped-in” to the same PCB
footprint as standard crystal oscillators.
Block Diagram
Standby#
PFD VCO
Frac-N
PLL
Resonator
OutputVDD
GND
(pin1)
Standby#
PFD VCO
Frac-N
PFD VCO
Frac-N
PLL
Resonator
OutputVDD
GND
(pin1)
Features
Frequency Range: 1 to 150MHz
Exceptional Stability over Temperature
o ±25 PPM, ±50 PPM
Operating voltage
o 1.8 to 3.3V (nominal)
o 1.65 to 3.60V (absolute max)
Operating Temperature Range
o Industrial -40ºC to 85ºC
o Ext. Commercial -20ºC to 70ºC
o Commercial 0ºC to 70ºC
Low Operating and Standby Current
o 3mA Operating (40MHz)
o 1uA Standby
Ultra Miniature Footprint
o 2.5 x 2.0 x 0.85 mm
o 3.2 x 2.5 x 0.85 mm
o 5.0 x 3.2 x 0.85 mm
o 7.0 x 5.0 x 0.85 mm
Excellent shock and Vibration
Resistance
Lead Free, RoHS & Reach SVHC
Compliant
Handheld programmer available for
purchase
Benefits
Pin for pin “drop in” replacement for
industry standard oscillators
Semiconductor level reliability,
significantly higher than quartz
Frequency Resolution to 4 decimals
Fully Programmable Operating Voltage
and Frequency
Longer Battery Life / Reduced Power
Compact Plastic package
Cost Effective
Applications
Mobile Applications
Consumer Electronics
Portable Electronics
CCD Clock for VTR Cameras
Low Profile Applications
Industrial
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 2 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
Absolute Maximum Ratings1
Item
Min.
Max
Unit
Condition
Supply Voltage
-0.3
+4.0
V
Input Voltage
-0.3
VDD+0.3
V
Junction Temp
-
+150
°C
Storage Temp
-55
+150
°C
Soldering Temp
-
+260
°C
40 sec max.
ESD
HBM
MM
CDM
-
2000
200
500
V
Ordering Code
Recommended Operating Conditions
Specifications
Notes:
1. Absolute maximum ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be
operated beyond these limits.
2. Output frequency to within 100ppm of final stable output frequency.
3. See typical cycle to cycle jitter graph for frequency dependence.
Parameter
Symbol
Range
Supply Voltage
VDD
1.65 – 3.60V
Output Load
ZL
R>10KΩ, C≤15pF
Operating Temperature
Option 1
Option 2
Option 3
T
-40 − +85 °C
-20 − +70 °C
0 − +70 °C
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Frequency
f0
Single Frequency
1
150
MHz
Frequency Tolerance
Option 1
Option 2
Option 3
Δf
-40°C to +85°C
-20°C to +70°C
0°C to +70°C
±25,±50
±25,±50
±25,±50
ppm
Supply Current, no
load
IDD
CL=0p
RL=∞
T=25°C
1 to 40MHz
40 to 80MHz
80 to 125MHz
125 to 150MHz
3
4
5
6
10
mA
Supply Current,
standby
IDD
T=25°C
1.0
uA
Output Logic Levels
Output logic high
Output logic low
VOH
VOL
CL=15pF
0.8*VDD
-
-
0.2*VDD
Volts
Output Transition time
Rise Time
Fall Time
tR
tF
CL=15pF; T=25°C
20%/80%*VDD
1.3
1.3
2
2
ns
Output Startup Time2
tSU
T=25°C
3
10
ms
Output Disable Time
tDA
20
100
ns
Output Duty Cycle
SYM
45
55
%
Input Logic Levels
Input logic high
Input logic low
VIH
VIL
0.75*VDD
-
-
0.25* VDD
Volts
Jitter, Cycle to Cycle
JCC
F = 100MHz3
95
ps
DSC8002
032.0000
Family
Output Freq
1.0 to 150MHz
CE1
Package, Temp
& Stability
-
T
Tape/
Reel
* See Ordering Information for details
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 3 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
Nominal Performance Characteristics
1.8V Characteristics
Supply Current
0
4
8
12
16
050 100 150
Frequency (MHz)
Supply Current (mA)
1pF 8pF 15pF
Ta = 25°C
Standby Current
0
0.2
0.4
0.6
0.8
1
050 100 150
Frequency (MHz)
Standby Current (µA)
-40°C 25°C 85°C
Rise Time
0
0.5
1
1.5
2
050 100 150
Frequency (MHz)
Rise Time (ns)
-40°C 25°C 85°C
Fall Time
0
0.5
1
1.5
2
050 100 150
Frequency (MHz)
Fall Time (ns)
-40°C 25°C 85°C
Period Jitter
0
10
20
30
40
050 100 150
Frequency (MHz)
RMS Jitter (ps)
25°C
Cycle to Cycle Jitter
0
50
100
150
200
050 100 150
Frequency (MHz)
Jitter (ps)
25°C
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 4 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
3.3V Characteristics
Supply Current
0
4
8
12
16
050 100 150
Frequency (MHz)
Supply Current (mA)
1pF 8pF 15pF
Ta = 25°C
Standby Current
0
0.2
0.4
0.6
0.8
1
050 100 150
Frequency (MHz)
Standby Current (µA)
-40°C 25°C 85°C
Rise Time
0
0.5
1
1.5
2
050 100 150
Frequency (MHz)
Rise Time (ns)
-40°C 25°C 85°C
Fall Time
0
0.5
1
1.5
2
050 100 150
Frequency (MHz)
Fall Time (ns)
-40°C 25°C 85°C
Period Jitter
0
10
20
30
40
050 100 150
Frequency (MHz)
RMS Jitter (ps)
25°C
Cycle to Cycle Jitter
0
50
100
150
200
050 100 150
Frequency (MHz)
Jitter (ps)
25°C
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 5 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
Output Waveform
Standby Function
Standby#
(pin 1)
Output
(pin 3)
Hi Level
Output ON
Open
(no connect)
Output ON
Low Level
High Impedance
Test Circuit
0.01uF
VDD
15pF
IDD
*VSD
4
1
2
3
*VSD = Standby# Logic Level Input
80%
20%
50%
VOL
1/fo
Output
Standby#
tDA
tEN
tF
tR
VOH
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 6 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
Board Layout (recommended)
Solder Reflow Profile
Package Dimensions
7.0 x 5.0 mm Plastic Package
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp)
3°C/Sec Max.
Preheat Time 150°C to 200°C
60-180 Sec
Time maintained above 217°C
60-150 Sec
Peak Temperature
255-260°C
Time within 5°C of actual Peak
20-40 Sec
Ramp-Down Rate
6°C/Sec Max.
Time 25°C to Peak Temperature
8 min Max.
Pin Terminal
VDD
Standby#
Output
GND
#1
#2
#3
#4
7.0±0.10 [0.276±0.004]
5.0±0.10 [0.197±0.004]
External Dimensions
#4
#3
5.08 [0.2]
#2
#1
1.2 [0.047]
1.4 [0.055]
0.85±0.05 [0.033±0.002]
Recommended Land Pattern*
1.4 [0.055]
1.4 [0.055]
5.08 [0.200]
units: mm [inch]
No.
4
1
3
2
0.2 [0.008]
2.6 [0.102]
2.6 [0.102]
0.2 [0.008]
2.2 [0.087]
3.5 [0.138]
o o
o o
o o
0.2 [0.008]
*Note: The center pad is not connected
internally and should be left un-
connected or tied to GND.
60-150
Sec
20-40
Sec
60-180
Sec
8 min max
Pre heat
Reflow
Cool
Time
Temperature (°C)
3C/Sec Max.
6C/Sec Max.
200°C
217°C
150°C
25°C
260°C
3C/Sec Max.
60-150
Sec
20-40
Sec
60-180
Sec
8 min max
Pre heat
Reflow
Cool
Time
Temperature (°C)
3C/Sec Max.
6C/Sec Max.
200°C
217°C
150°C
25°C
260°C
60-150
Sec
20-40
Sec
60-180
Sec
8 min max
Pre heat
Reflow
Cool
Time
Temperature (°C)
3C/Sec Max.
6C/Sec Max.
200°C
217°C
150°C
25°C
260°C
3C/Sec Max.
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 7 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
5.0 x 3.2 mm Plastic Package
3.2 x 2.5 mm Plastic Package
Pin Terminal
VDD
Standby#
Output
GND
0.85±0.05 [0.033±0.002]
Recommended Land Pattern
#1
#2
#3
#4
3.2±0.05 [0.126±0.002]
2.5±0.05 [0.098±0.002]
#4
#3
#2
#1
0.8±0.1 [0.031±0.004]
0.9±0.05 [0.035±0.002]
CO.25
1.0 [0.039]
0.9 [0.035]
2.1 [0.083]
No
.
4
1
3
2
2.1 [0.083]
External Dimensions
units: mm [inch]
0.9 [.035]
0.9 [0.035]
0.2 [0.008]
Pin Terminal
VDD
Standby#
Output
GND
#1
#2
#3
#4
5±0.10 [0.197±0.004]
3.2±0.10 [0.126±0.004]
External Dimensions
#4
#3
2.54 [0.100]
#2
#1
0.9 [0.035]
1.2 [0.047]
0.85±0.05 [0.033±0.002]
Recommended Land Pattern
1.1 [0.043]
1.2 [0.047]
2.54 [0.100]
units: mm [inch]
No.
4
1
3
2
0.2 [0.008]
0.1 [0.004]
2.1 [0.083]
1.2 [0.047]
0.1 [0.004]
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Micrel, Inc. Micrel Inc. may update or make changes
to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not limited to
implied warranties of merchantability or fitness for a particular use.
Page 8 |
MK-Q-B-P-D-031809-06-6
DSC8002 Series
1.8 to 3.3V
Programmable Low-Power CMOS Oscillator
2.5 x 2.0 mm Plastic Package
Ordering Information
DSC8002 PTS – T
Package
(Plastic QFN)
Temperature
Stability
Packing Option
P=A: 7.0x5.0mm
P=B: 5.0x3.2mm
P=C: 3.2x2.5mm
P=D: 2.5x2.0mm
T=C: 0o ~ +70o C
T=E: -20o ~ +70o C
T=I: -40o ~ +85o C
S=1: ±50ppm
S=2: ±25ppm
Blank: Tubes
- T: Tape & Reel
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a
warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No
license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel’s terms and
conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel
products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
MICREL, Inc. ● 2180 Fortune Drive, San Jose, California 95131 ● USA
Phone: +1 (408) 944-0800 ● Fax: +1 (408) 474-1000 ● Email: hbwhelp@micrel.com ● www.micrel.com
Pin Terminal
VDD
Standby#
Output
GND
0.85±0.05 [0.033±0.002]
Recommended Land Pattern
#1
#2
#3
#4
2.5±0.05 [0.098±0.002]
2.0±0.05 [0.079±0.002]
#4
#3
#2
#1
0.65±0.10 [0.026±0.004]
0.65±0.05 [0.026±0.002]
CO.25
0.85 [0.033]
0.65 [0.026]
0.7 [0.028]
1.65 [0.065]
No
.
4
1
3
2
0.7 [0.028]
1.65 [0.065]
External Dimensions
units: mm [inch]
0.2 [0.008]
