Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 03029
www.vishay.com For technical questions, contact: mlcc.specials@vishay.com Document Number 45042
54 Revision 14-Aug-07
DSCC 03029
Vishay Vitramon
ELECTRICAL SPECIFICATIONS
Note:
Electrical characteristics at + 25 °C unless otherwise specified.
Operating Temperature: BP, BR, BX: - 55 °C to + 125 °C
Capacitance Range:
BP = 0.5 pF to 180 pF
BR = 100 pF to 3900 pF
BX = 100 pF to 3900 pF
Voltage Rating: 10 Vdc to 100 Vdc
Temperature Coefficient of Capacitance (TCC):
BP = 0 ± 30 ppm/°C from - 55 °C to + 125 °C with zero (0) Vdc
applied
BP = 0 ± 30 ppm/°C from - 55 °C to + 125 °C with 100 % rated Vdc
applied
BR = ± 15 % from - 55 °C to + 125 °C with zero (0) Vdc applied
BR = + 15 %, - 40 % from - 55 °C to + 125 °C with 100 % rated Vdc
applied
BX = ± 15 % from - 55 °C to + 125 °C with zero (0) Vdc applied
BX = + 15 %, - 25 % from - 55 °C to + 125 °C with 100 % rated Vdc
applied
Dissipation Factor (DF):
BP:
0.15 % max. at 1.0 Vrms and 1 MHz for values ≤ 1000 pF
0.15 % max. at 1.0 Vrms and 1 kHz for values > 1000 pF
BR and BX:
≤ 25 V ± 3.5 % max. at 1.0 Vrms and 1 kHz
≥ 50 V ± 2.5 % max. at 1.0 Vrms and 1 kHz
FEATURES
•US defense supply center approved
•Federal stock control number, CAGE CODE 95275.
•Small case size (0402)
•Stable BP, BR and BX dielectrics
•Excellent aging characteristics
•Lead (Pb)-free applied for “M” termination code
•Tin/Lead “Z” termination code is available
•Surface-mount, precious metal technology, wet build
process
•Made with a combination of design, materials and tight
process control to achieve very high field reliability
Aging Rate:
BP = 0 % maximum per decade.
BR, BX = 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current
does not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
Note:
1. DC voltage rating should not be exceeded in application
* Pb containing terminations are not RoHS compliant, exemptions may apply
DIMENSIONS
PART ORDERING
NUMBER LENGTH WIDTH MAXIMUM
THICKNESS (T)
TERMINATION PAD
MINIMUM MAXIMUM
VJ03029- 0.040 ± 0.004
[1.02 ± 0.10]
0.020 ± 0.004
[0.51 ± 0.10]
0.024
[0.61]
0.004
[0.10]
0.016
[0.41]
ORDERING INFORMATION
VJ03029- BX 102 B J Z - T
DSCC
NUMBER
DIELECTRIC CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING 1)
CAPACITANCE
TOLERANCE
TERMINATION GROUP C TESTING
OPTION
PA CK A GI N G
CASE
SIZE
0402
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
101 = 100 pF
1R8 = 1.8 pF
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
H = ± 3 %
J = ± 5 %
K = ± 10 %
NOTE:
C, D < 10 pF (BP)
F, G , H
≥
10 pF (BP)
J, K
≥
10 pF
(BP, BR, BX)
M = Palladium
silver
Z = Ni barrier with
tin/lead plate
min. 4 % lead
C = Full Group C
L = 2000 hrs. life test only
M = 1000 hrs. life test only
H = Low voltage humidity
test only
- = Group A test only
T = 7" Reel Plastic tape
O = 7" Reel Paper tape
J = 7" Reel (low quantity)
R = 11 1/4" Reel Plastic tape
I = 11 1/4" Reel Paper tape
B = Bulk
Available
RoHS
COMPLIANT