Product Data Sheet Bendix Subminiature JT/LUT MIL-C-27599 Solder Contact Connectors No. 158 The popular Bendix MIL-C-38999 Series | and II (LUT and JT respectively) are also available in solder versions as both commercial parts and military qualified to MIL-C- 27599. Bendix JT/LUT MIL-C-27599 solder contact connectors offer the following benefits: e Lightweight, Space Saving Design Contact Protection - 100% scoop-proof LUT design pre- vents bent pins and short circurts during mating Quick Positive Coupling - 3 point bayonet lock system Mismating Eliminated - with 5 key/keyway design @ Error Proof Alternate Positioning - insured by different key/keyway locations @ EMI Shielding - grounding fingers standard in LJT Series; optional in JT Series Nine Shell Sizes and a Variety of Shell Styles Fully intermateable and intermountable with MIL-C- 38999 Series | & Il, as applicable, crimp type connectors The JT/LUT solder type connectors use a rigid, hard dielec- tric insert which is molded around the pin and socket contacts. This permits pressurization of 1 atmosphere across an interface with a leak rate up to 1 X 10 cc/sec. See page 7 for classes. Contact positional tolerances are also considerably reduced with less chance of pin bending. Standard solder tools are all that is required to terminate these connectors. Continuous operating temperature is rated at 175C (302F) This publication provides dimensional data and how to order information on the shell styles available in solder type JT/LUT connectors. For insert availability of these solder contact connectors refer to Amphenol/Bendix catalog 12-090, JT/LUT Subminiature Cylindrical Connec- tors, pages 49. A complete line of accessories is also available. * HdWV* wa ali 1993 Amphenol Corporation Amphenol For additional information on Bendix JT/LJT solder type connectors or for any special application needs, contact your local Amphenol sales office or: Amphenol Corporation Bendix Connector Operations 40-60 Delaware Avenue Sidney, New York 13838-1395 Telephone: 607-563-501 1 Fax: 607-563-5157 Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corparation Sales Office for the iatest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee. warranty. or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that ail safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL and BENDIX are registered trademarks of Amphenol Corporation Printed in U.S.A. 3/93JTOO (MS27334) solder wall mounting receptacle + .006 +.006 + .006 380 _ a0 +000 +} + 380 _ 'o0 380 _ 'o00 155 MAX 3227 oe 1155 MAX ~+ }- 155 MAX rr t I Tle N 4 +- F KK N + L | | ut Vv 4 Lui (4HOLES) *JTOOP-XX-XXX (MS27334P) *ITOOA-XX-XXX * STOOA-XX-XXX(SR) * JTNOOP-XX-XXX *JTOOC-XX-XXX (MS27334T) * JTNOOA-XX-XXX(SR) *STNOOA-XX-XXX *JTOOC-XX-XXX(SR) @>.005 DIA) *STNOOC-XX-XXX To complete order number see page 7. NOTE: For availability of back panel mounting types, consult Sidney, NY. Vv F Ft N Thread Modified KK Sheli | Dia. +.010 u' L? L3 +.001 R Ss T Size Modified Dia KK' Size Min. .025 | Max. Max. Max. .005 (TP) +.016 + 005 Class 2A Major Dia. Max. Max. 8 2312 | .125 422 734 .234 473 594 812 -120 .4375-28UNEF -421- .417 -500 812 10 429 | .188 422 734 .234 590 719 .938 .120 .5625-24UNEF .542- 538 -625 875 12 543 | 312 422 .734 .234 .750 812 1.031 .120 .6875-24UNEF .667- .663 .750 | 1.000 14 .668 | .375 422 497 .234 875 .906 1.125 .120 .8125-20UNEF .791- .787 875 | 1.125 16 .793 | .500 422 797 .234 | 1.000 .969 1.219 -120 .9375-20UNEF 916- .912 1.000 | 1.188 18 894 | .625 422 197 234 | 1.125 1.062 1.312 120 1.0625-18UNEF 1.034-1.030 1.109 | 1.438 20 | 1.019 | .625 422 .859 .234 | 1.250 1.156 1.438 -120 1.1875-18UNEF 1.158-1.154 1.234 | 1.438 22 | 1.144 | .750 422 -859 .234 | 1.375 1.250 1.562 .120 1.3125-18UNEF 1.283-1.279 1.359 | 1.625 24 | 1.269 | .800 422 922 313 | 1.500 1.375 1.688 147 1.4375-18UNEF 1.408-1.404 1.484 | 1.719 All dimensions for reference only. JTO2 (MS27335) solder box mounting receptacle .010 MAX . To complete order number see page 7. NOTE: For availability of back panel mounting types, consult Sidney, NY. | KK Shell +.001 R Ss T KK Size 005 (TP) + .016 . Max. Te MAX whfoos DR = 8 473 594 812 . .391 + .006 - - * +~-- 380 _ ogg . . 1.031 (4HOLES) *JTO2P-XX-XXX *JTO2ZA-XX-XXX *JTO2C-XX-XXX (MS27335T) 1. *JTNO2P-XX-XXX { *JTNO2ZA-XX-XXX : *STNO2C-XX-XXX All dimensions for reference only.JTO6 (MS27336) solder straight plug * a . rob BB nny | 4-286 MAX. | jee .2B6MAX. | + 003 . | + .003 . stem 257 oo a _ F | ou . l oy *JTOGP-XX-XXX (MS27336P) *JTOGA-XX-XXX (MS27336T) *JTO6GA-XX-XXX(SR) * JTNOGP-XX-XXX * STNO6BA-XX-XXX *JTNOGA-XX-XXX(SR) *To complete order number see page 7. F Shell +.010 Size Modified Size ~ 025 . Class 2A Major Dia. 24 1.269 .800 . . 1.4375-18UNEF 1.408-1.404 Ali dimensions for reference only. JTGO6A solder straight plug (with grounding ring) To complete order number see page 7. **Coupling nut is clear iridite finish (gold color), shell and grounding fingers are gold plated N.O, resistant, to complete order number see page 7. H Dia Q V Thread Modified Shell | +.010 L Dia. Size -.001 | Max. Max. Class 2A Major Dia. 8 .635 | 625 734 . 421- .417 GROUNDING 1" RING ~~~ | +.003 _| 257 | og -286 MAX *ITGOGA-XX-XXX ** JTNGOGA-XX-XXX All dimensions for reference only.JTO7 (MS27337) solder jam nut receptacle Po i | -H 4 < 2-4 * JTNO7P-XX-XXX *.059 dia. min 3 lockwire holes. eD shaped mounting hole dimensions. *To complete order number see page 7. Panel thickness t O Ring not furnished with MS27337. a H Shell + .000 Cc Size .010 Max. 24 1.826 2.405 All dimensions for reference only. 1.269 .800 Cc. a 438 MAX (2 PLACES) -~ 7 a lon | 062 MIN** *JTO7P-XX-XXX (MS27337P) +.017 .016 +.011 M 094" o10 062 MIN** "109 MAX O RINGt a i CG | N - 0 * RR 4 | *JTO7ZA-XX-XXX *JTO7C-XX-XXX *JTNO7A-XX-XXX *JTNO7C-XX-XXX L Max. 828 464 . ee L - M+ | 062 MIN** re 409MAX i 5 *JTO7A-XX-XXX(SR) * JTNO7A-XX-XXX(SR) * JTO7C-XX-XXX(SR) RR Thread Class 2A 1.719 1.8750-16UN JTO8 solder 90 plug +003 |, ug .286 257 ~ 999 aa 1 *JTOSP-XX-XXX * JTNO8P-XX-XXX \ K- Lk OVAL SHAPED HOLE To complete order number see page 7. Shell H K Size Min. Min. 8 .396 126 All dimensions for reference only.' LJTOO (MS20026) solder wall mounting receptacle i +.006 359 + .006 tee Go , ~~ 717-900 MAX 7177900 020 | : +. = M-- 4 | MM { To 897 "905 | | + Coes | L le ile r! | (TP) s N Np ere F KK | | | i | Ld Uy " TI + wade t N i i i Te ' i +.020 (4HOLES) *_ +397 "995 a Ta ao L005 DIA *LJTOOT-XX-XXX (MS20026T) *LUTOOP-XX-XXX To complete order number see page 7. NOTE: For availability of back panel mounting types, check with nearest sales office or call Amphenol, Sidney, NY. M N T V Thread KK Sheil F L +.000 +.001 R s Dia. Class 2A Dia Size Dia. Max. .005 .005 (TP) +.016 + .005 UNEF (Plated) Max. 25 1.284 .703 .602 1.582 1.500 1.812 147 1.4375-18 1.610 All dimensions for reference only. LJT01(MS20027) solder we --- 1.117.025 -- + +.020 ~+ - 1.078MAX a t F 887 _ "995 +.006 Li +.006 --.717 B99 4 ij k--717 O99 4 w M | | M aie I | 4 | i 1 Q |; | 8 ) s N + oan N te. -- EH ee F KK To x tt [| : * _ Sv ~~ tb _ MAX *To complete order number see page 7. *LJTO1T-XX-XXX (MS20027T) *LJUTO1P-XX-XXX M N V Thread KK Shell Cc F + .000 +.001 Ss Class 2A Dia. Size Max. " .005 .005 +.016 UNEF (Plated) Max. 1. All dimensions for reference only.LJTO6 (MS20028) solder straight plug + - |) ---- oe *- .523+.025. -+ * GROUNDING GROUNDING ~. ES RING RING PS Q i ~ song *LJTOGT-XX-XXX (MS20028T) *LJTO6P-XX-XXX To order number see 7. V Thread F L Q Class 2A Dia. Max. UNEF (Plated) 25 1.284 1.1914 1.644 1.875 All dimensions for reference only. LJTO7 (MS20029) solder jam nut receptacle 1.4375-18 1.610 . Ve a 203.025 + ae cL 203.025 b+ Pope AUN | | ant ww L062 MIN J | 25 MAX .125 MAX #..915+.005---4 PANEL = 915+.005- 4 PANEL THICKNESS THICKNESS *D shaped mounting hole dimensions *LUTO7T-XX-XXX (MS20029T) *LJTO7P-XX-XXX (MS20029P) *To complete order number see 7. A HHex N KK KK" RR Thread Shell +.000 c +.017 L u' +.001 s +.010 +.011 Dia. Class 2A Size .010 Max. .016 Max. Max. -.005 | +.016 | -.000 | -.000 | Max. (Plated) 1. All dimensions for reference only.how to order subminiature JT/LUT MIL-C-27599 solder contact connectors To illustrate ordering procedure for solder type subminiature connectors, part number JTOORE-22-2PA( )} is shown as follows: PART NUMBER 7 oT? tit to See code below: 1. Connector Type: JT designates standard Junior Tri-Lock connector LJT designates long Junior Tri-Lock Connector JTG designates plug with grounding fingers (Grounding fingers standard on all LUT plugs) JTN designates connector with iridite finish (gold color), N20, resistant 2. Shell Style 00 designates wall mount receptacle 01 designates line mount receptacle 02 designates box mount receptacle 06 designates straight plug 07 designates jam nut receptacle 08 designates 90 degree plug 3. Service Class: Solder contacts/connectors P for potting applications These connectors are supplied with a potting boot (not applicable to box mounting style.) A for general duty applications A (SR) threaded rear design with strain relieff. C for pressurized applications. C (SR) threaded rear design with strain relieft. T for MS27599 applications General duty pressurized (recep- tacles only) 4. Shell Size: JT Sheil size available from 8 through 24. LUT shell sizes available from 9 through 25. (Pages 4 through 9 in Amphenol/Bendix catalog 12-090). 5. Insert Arrangement: 22-2 designates insert arrangement. Refer to pages 4 through 9 in Amphenol/Bendix catalog 12-090 for additional insert patterns. 6. Contact Style: P designates pin contacts. S designates socket contacts 7. Alternating Keying: A designates alternate keying connector assembly. Other basic alternate keys are B, C, and D. No letter required for normal (no rotation) position. See Amphenol/Bendix catalog 12-090. 8. SR designates a strain relief clamp. Strain reliefs are available only on A & C class connectors. 9. Finish variation suffix. Finish Finish, onan plus'"SR" Data Suffix Cadmium plated nickel base A (SR) Olive drab cadmium plate nickel base B (014) (386) Electroless nickel (023) (424) Anodic coating (Alumilite) (008) (300) Chromate treated (lridite 14-2) (011) (344) tNot applicable to box mounting style. MILITARY TYPES MS27334 T 14 A 18 P A MS Number ne Service Class Shell Siz Finish Insert Arrangement Contact Style (P or S) Alternate Keying No letter required for normal position For MS depictions and dimensional data see MiL-Spec, MIL-C-27599 Bendix Federal Vendor Identification/FSCM 77820