Amphenol
Contents
Star-Line® Series Overview ..........................................................................................2
Star-Line EX® Series Overview ....................................................................................3
Environmental Highlights, Double Lead Acme Thread Features,
Wire Limitation Guide ...................................................................................................4
Contact Insert Features-Mod I, Mod II ........................................................................5
Connector Component Ordering Details ................................................................ 6 - 9
Plug Hardware Assemblies ................................................................................ 10 - 13
Receptacle Hardware Assemblies ..................................................................... 14 - 22
Starline EX® Product Instructions ....................................................................... 23 - 24
Starline EX® Ordering Details, EEx d Cable Types ............................................ 25 - 27
Starline EX® Hardware ...................................................................................... 28 - 30
Starline EX® Description of Equipment & Part Number Code Logic ..........................31
Starline EX® Assembly and Termination Instructions ......................................... 32 - 40
Single Pole Power Connectors .......................................................................... 41 - 45
InsertCongurationListing,ElectricalRatings ................................................... 46 - 47
Spare Replacement Contacts for MOD II Inserts .......................................................48
Termination Data ........................................................................................................49
Thermocouple Contacts .............................................................................................50
InsertCongurationIndex .................................................................................. 51 - 53
InsertCongurations .......................................................................................... 54 - 81
V.F.D.InsertCongurations................................................................................ 82 - 83
Connector Components, Spare Parts, Cable Adapters and Accessories .......... 84 - 89
Protection Covers and Caps Accessories .......................................................... 90 - 91
Conduit System Accessories .............................................................................. 92 - 93
Crimping, Insertion and Removal Tools ............................................................. 94 - 95
Connector Assembly and Termination Instructions ....................................................96
Connectors with RADSOK® High Amperage Contacts and
Other Amphenol®/Pyle® Connectors ................................................................... 97 - 99
SalesOfcesandDistributorsListing ......................................................................100
Catalog information for reference only. For more assistance, contact your
localAmphenoleldsalesofceor:
Amphenol Industrial Operations
40-60 Delaware Avenue,
Sidney, NY 13838-1395
Phone:1-888-364-9011
Fax:1-520-397-7169
Technicalemail:tech@amphenol-aio.com
This catalog and most all Amphenol catalogs are available for viewing,
printinganddownloadingonwebsites:
www.amphenol-industrial.com
www.amphenol-aerospace.com
Amphenol
INDUSTRIAL
2
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
STAR-LINE® Series
Star-Line Series “ZP/ZR” connectors are heavy duty environmentally sealed plugs and receptacles and have been
successfully used in all types of Industrial and Aerospace applications. These compact environmental connectors
have provided outstanding performance in complex ground support cable networks, automatic and process control
systems and instrumentation systems.
This family of connectors has made a major contribution to the successful interconnection of peak power generating
systems as well as offshore petroleum production for power distribution and data acquisition.
Ample margins of safety and reliability have been designed into the Star-Line connectors to maintain capability levels
which make them ideally suited for the broad spectrum of demands placed on them by industry.
ThespecicmaterialsanddesignfeaturesincorporatedinStar-Lineconnectorswereoriginallyselectedtosatisfythe
stringent requirements of the Aerospace industry for heavy-duty connectors. These connectors combine electrical and
mechanicalcapabilitiesthatequalorexceedtheperformanceparametersestablishedbytheMilitarySpecication
MIL-5015.
UL & CSA listed to UL1977/CSA C22.2 requirements
ENVIRONMENTAL RESISTANCE – Design and materials withstand the most challenging operating conditions.
Series has an IP 68-8 rating.
SOLDER, CRIMP AND PRESSURE TERMINALS AVAILABLE
EASILY ACCESSIBLE WIRE TERMINALS – Conductors are readily terminated to contacts. Cable housings are
slipped over conductors or leads after terminating. Cumbersome handling and seating of inserts with conductors
attached is eliminated.
LARGE WIRING SPACE–Amplewiringspaceisprovidedincablehousingsandconduitttingbodies.Hubof
body mounts in any of four positions (except FS & FD box assemblies).
REVERSIBLE INSERTSA full range of contact inserts and application adapters are available. All are
interchangeable and reversible to suit special needs.

DOUBLE-LEAD THREAD COUPLING–Modied
Acme Thread does not clog under adverse
conditions of ice, snow, sand or mud and provides
the quick coupling feature.
HARD ANODIC COATINGAll machine,
aluminumpartsnishedwithahard,scratch-
resistant coating per MIL-A-8625, Type III.
Dielectric strength 1800 volts. Heat resistance of
750° F.
HIGH TENSILE STRENGTH *ALUMINUM – Bar
Stock Components precision machined. Points of
impact designed for extra strength.
RADSOK® HIGH AMPERAGE CONTACTS
Special arrangements are available with RADSOK
high amperage contacts. Standard Star-line inserts
are not interchangeable with new RADSOK contact
insert arrangements.
RoHS COMPLIANT PRODUCT
AVAILABLE – Consult
Amphenol Industrial Operations.
The Star-Line EX Series is a hybrid form of the parent Starline
productline.TheseriesiscertiedforuseinaZone1-IIchaz
ardousenvironment.Classiedfacilitiessuchaspetrochemical
reneries,landandoffshoredrillingsystemsarebutafewof
the applications for this broad product series.
ATEX CERTIfIED –forZone1-IIchazardousenvironment.For
certicatecontactfactory
IECEx CERTIfIED
Forcerticatecontactfactory
CENELEC IP68-8 RATED
Listed under EEx d IIc T6.
Plugs and receptacles listed under EEx de IIc T6.
HARD ANODIC COATINGAll machined aluminum parts
nishedwithahard,scratch-resistantcoatingperMIL-A-8625,
Type III. Dielectric strength 1800 volts. Heat resistance of 75F.
SOLDER, CRIMP AND PRESSURE TERMINALSAVAILABLE
REVERSIBLE INSERTSA full range of contact inserts for power, signal and mixed applications are available. All
areinterchangeableandreversibletosuitspecicneeds.
EASILY ACCESSIBLE WIRE TERMINALS – Conductors are readily terminated to contacts. Cable housings are
slipped over conductors or leads after terminating.
Cumbersome handling and seating of inserts with conductors attached is eliminated.
LARGE WIRING SPACEAmple wiring space is provided in
cable housings and hardware.
HIGH TENSILE STRENGTH ALUMINUM – Bar Stock
Components precision machined. Points of impact designed for
extra strength.
CABLE OPTIONS – Starline EX Series can be terminated onto
unarmored or armored and sheathed cables built to IEEE-45 /
UL1309, IEC, BS, DIN and JIC standards. Flexible cables like
SOOW-A, W, G-GC and DLO constructions can also be used
with this Series.
EX CABLE GLANDS – Wide variety of glands are available
for Star-Line EX connectors. For more information ask for new
Amphenol Cable Glands and Cord Grips catalog 12-055.
INSERT VARIETYA broad range of inserts are offered ranging
from single-contact to 143 contacts.
High amperage up to 1135 amps at 1000V / AC or DC.
Contacts are high quality copper with silver plating. (Gold plating
available as an option) Composite inserts for power, control and instrumentation service available. 


RADSOK® HIGH AMPERAGE CONTACTS – Special arrangements are available with RADSOK high amperage
contacts. Standard Star-line EX inserts are not interchangeable with new RADSOK contact insert arrangements.
RoHS COMPLIANT PRODUCT
AVAILABLE – Consult
Amphenol Industrial Operations
STAR-LINE® EX Series
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C



3
Environmental
Highlights
The double-lead Acme thread is a moderate torque
quick-coupling thread which permits complete coupling
in approximately one turn of the coupling nut. In addition,
there are actually two parallel threads having starting
points 180 degrees apart. All of this ensures that plugs and
receptacles are being mated or unmated axially.
The thread contour makes it self-cleaning.
MIL-5015
REqUIREMENTS
CLASSES A, B, E STAR-LINE, STAR-LOK
PROPERTY J & R CONNECTORS
TEMPERATURE -67° F to 225° F Temperature Classes A, B, E,
(-55° C to 107° C) J and R can withstand 257° F
continuously. For short duration
high-temperature life,
consult factory.
PRESSURE No requirement 300 PSI external
(coupled connectors)
200 PSI internal
(with pin and socket inserts)
AIR LEAKAGE 1 cubic inch/ Exceeds Classes E
hourmaximum andRspecications
HUMIDITY AND 1 1/2 times A.C. Exceeds Classes
MOISTURE voltage rating after E and R.
RESISTANCE 14 days. MIL-5015
Exposure to Meets MIL-STD-202B,
95% relative Method 106A
humidity at 160° F.
CORROSION 48Hours– Saltspray:300days
RESISTANCE Method 1001 – No exposure of base metal.
MIL-STD-1344
No exposure of
base metal.
CHEMICAL No requirement Oil, most acids
RESISTANCE and alkalis.
DUST No requirement Meets MIL-STD-202B,
RESISTANCE Method 110, Condition B
SHOCK 50 G minimum Exceeds 60 G’s
RESISTANCE Certain inserts available
to 200 G.
VIBRATION Method 2005 Exceeds Method II &
Method II MIL-STD-167-1 (Ships).
MIL-STD-1344
TEST PROBE Contactsize ExceedsMIL-5015
ABUSE No. 16 and No. 18 on all contacts
No. 18 through 4/0.
Why the Double-Lead
Acme Thread?
There are restrictions to the maximum diameter of wire as
they relate to the rear or wire side of the connector insert
as follows.
Mod I. When wires are passed through the rigid back
insulationforeaseofsoldering:
Wire size Maximum diameter
#4/0 .747”
#1/0 .555”
#4 .400”
#8 .262”
#10 .201”
#12 .150”
#16 .107”
#18 .086”
Mod II & III
#10 .248”
#12 .193”
#16 .130”
#18 .110”
Wire Limitation
Guide




STAR-LINE®
4
Amphenol
INDUSTRIAL
Pressurizing
Sleeve
Green
Contact Seal
Insert
Seal
Shell Seal
Adapter Seal Adapter Washer
Red
Cable Adapter
Coupling Nut
Plug Barrel
Rigid Insulator
Double Lead
Acme Thread
Resilient Insulator
Receptacle Barrel
Pressure Sleeve
Pressure
Pad
Double Lead Acme Thread
Shell Seal
Adapter Seal Adapter
Washer
Pressure
Pad
Cable Adapter
Coupling Nut
Plug Shell
Rigid Front Insulator
Resilient Contact Seal Laminant
Rigid Rear Insulator
Receptacle
Shell
MOD II insulations have one less rigid disc than their
MOD I counterparts.
Individual unmounted contacts are crimped to their respective
wires outside of the connector where ample working space is
available. The crimping operation can be by hand or power
operated tool.
Contacts with crimped joint intact are inserted one by one,
with a hand tool, into the insulation premounted within the
connector barrel shell.
The resilient portion of the insert functions to seal around the
contacts and prevent leakage through contact cavities, seal
The combined “sandwich” provides all the advantages of
resilient mounting plus all the advantages of rigid mounting,
with none of the shortcomings of either. Under pressure,
between a shoulder and a thrust washer, the silicone reacts as
auidandbeingnon-compressible,owsagainstallsurfaces
to affect a reliable seal around the periphery of the insert and
around all contacts where they penetrate the insulation.
Contact cavities are clearly numbered on the front and
rearinsertfacetofacilitateidenticationduringassembly,
inspection and maintenance. Socket insulator contact cavities
are of a bellmouth guided entry design. These chamfered lead-
ins insure easy and positive mating of male contacts.
Self-sealingConstruction:allMODIcaptivecontactinserts
are capable of being terminated after assembly in the basic
barrelandarecompletelyself-sealingwhenpressurizedbyany
selected adapter. Water, gas, vapor, moisture or dust positively
cannot pass in either direction through or around the insulation.
The “sandwich” construction of MOD I inserts consists of a
resilient silicone laminate between two rigid plastic insulators.
The resilient laminate seals absorbs shock and vibration and
allows the contacts to align themselves freely. The rigid faced
plastic insulators impart just the right amount of restraint to
retain the contacts in place.
against leakage between the insert and shell, absorb shock
and vibration, provide electrical insulation between contacts
and retain the contacts in the connector.
Contacts may be inserted and removed without degradation
of the retention or environmental capability. The front rigid
portionoftheinsertfunctionstostabilizeandensurepositive
alignment of the contacts.
Contact cavities are clearly numbered on the front and rear
insertfacetofacilitateidenticationduringassembling,
inspection and maintenance. Socket insulator contact cavities
are of a bellmouth guided entry design. These chamfered lead-
ins ensure easy and positive mating of male contacts.
Captive Contact Inserts
MOD I
Insertable/Removable Crimp Contact Inserts
MOD II
Amphenol
INDUSTRIAL
5
STAR-LINE®
Ordering Information
Allplugandreceptacleassembliesrequiretwopartnumbers:
A. The catalog number of the desired insert.
B. The catalog number of the selected plug or receptacle hardware.
To Order Complete Assemblies
1. Determine supply voltage, amperage and number of contacts desired.
2. Selectinsertcongurationfrompages37-63.WritedownDashNumber,ShellSizeandMODnumberofinsert.
Voltageandamperageinformationcanbefoundonpage30.Example:3#12contacts–27P(MALE)and27S
(FEMALE);MODI;ShellSize12(page37).
3. Selectdesiredplugandreceptaclehardwarefrompages9-28.Makecertainthattheshellsizeofthehardware
correspondswiththeshellsizeofthedesiredinsert.Determineoutsidediameterofcable.Example:MalePlug
with Basket Weave. Cable is 3 conductor #12 (.635 outside diameter). ZPLK-1212-27P (page 15).
Female Receptacle mounted to Junction Box with 45° Angle Adapter and 1” Conduit Hub. ZRLBB-312-27S
(page 23).
4. Order tools from pages 76-77.
Power Connectors – 20-30-60-100-200-325-700 Amperes, 1 thru 10 Contacts
Control & Instrumentation Connectors – 3 thru 143 Contacts
The following pages present connector sub-assemblies which are available and can be used in conjunction with the
inserts listed.
Custom Build
Your Own Connectors
To Order Assemblies Without The Insert
(For large users stocking connector components in bulk)
1. If a MOD I insert will be used, order the hardware by the catalog number and eliminate the asterisk.
Example:ZPLD-1212(page12).
2. If a MOD II insert will be used, order by the catalog number but substitute a 200 for the asterisk.
Example:ZPLD-1212-200
3. MOD III inserts must be ordered assembled in their basic barrel (consult Amphenol Industrial Operations).
PIN INSERT
CONFIGURATION
PLUG
CONFIGURATION
RECEPTACLE
CONFIGURATION
SOCKET INSERT
CONFIGURATION
6
STAR-LINE®
Amphenol
INDUSTRIAL
7
STAR-LINE®
Connector Assemblies
1. Hardware with a longer cable housing should be used if
the insert has:
A. Any pressure contact – line or ground.
B. More than 10 contacts-any size.
C. More than 4 #10 or larger contacts.
2. A jack coupling nut should be used if the insert has:
A. A conguration with shorter relay contacts.
B. A conguration of 37 or more contacts.
A JACK COUPLING NUT SHOULD NOT BE USED ON
ANY POWER INSERT CONNECTOR THAT IS TO BE
DISCONNECTED UNDER LOAD
Shell Size Torque Setting (lb. ft.)
12 11.0
16 13.5
20 15.5
C20 15.5
24 23.0
C24 23.0
28 31.0
C28 31.0
NOTE: The N.E.C. circuit breaking and non-circuit breaking
ratings are based on test results of contacts and connectors.
Consult the N.E.C. when selecting wire/cable for specific
applications. Under certain conditions, a wire size may be rated
higher or lower than our table indicates for a given contact size.
Please Read Carefully:
Typical MOD I Plug Components
Typical MOD I Receptacle Components
3. To insure proper coupling the following torque values
should be used on the coupling nut:
ENVIRONMENTAL
COVER - FEMALE
FLANGE
GASKET
SOCKET
CONTACTS
INSERT
CLAMP NUT
SQUARE FLANGE
RECEPTACLE
FEMALE
INSERT
MECHANICAL
CLAMP NUT GROMMET
MALE
INSERT
COUPLING
NUT
ENVIRONMENTAL
COVER - MALE
WASHER CABLE ADAPTER PIN
CONTACTS
MALE
SKIRT
Amphenol
INDUSTRIAL
8
STAR-LINE®
Amphenol
INDUSTRIAL
Connector
Basic Components
Typical Assemblies
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
9
STAR-LINE®
Code Logic
Star-Line Series
Kellems
(Basket weave grip) /
M for
Mechanical
nut clamp /
D for
gland nut
332-Z P E K L J- 18 20- P N K -01
Product
Series
Prex
Z– Star-Line
P for Plug /
R for cable
mounted
Receptable
(Inline)
Environmental
Cover /
L for no cover
Long cable
adapter /
Blank for
standard
length
Jack nut
(37 conductors
or more /
Do not use for
“C” power
applications /
100 amp or greater)
Grommet
code number
(cable dia.)
Shell size
of connector
(physical size)/
C before
shell number
for 100 amp.
& higher
Insert pattern
(32 for solder /
332 for
Mod 2 crimp /
P for Pin
(male) /
S for socket
(female)
N for crimp
contact /
R for pres-
sure /
Blank for
solder
K for gold
plated con-
tact /
Blank for
standard
Optional
Alternate
Key
Position
Cable Mounted Connectors
P for
panel mount /
BB for
back box
(see pg. 22)
Z R E P- 20- 332- S N K -01
R for receptacle /
P for plug
Environmental
Cover /
L for no cover /
C for ip cover
Insert pattern
(32 for solder /
332 for Mod 2 crimp)
Fixed Connectors
S for
socket
(female) /
P for pin
(male)
N for
crimp
contact /
R for pressure /
Blank for
solder
K for
gold plated
contact /
Blank for
standard
Optional
Alternate
Key
Position
Product
Series
Prex
Z– Star-Line
Shell size
of connector
RoHS COMPLIANT PRODUCT
AVAILABLE – Consult
Amphenol Industrial Operations.
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
Amphenol
INDUSTRIAL
10
STAR-LINE®
Size Shell Cat. No. DIMENSIONS Catalog No.
Cable Size With Standard WITH STANDARD CABLE ADAPTER With Jack
Coupling Nut A B C Coupling Nut
12 ZPLD--12-* 5-3/8 1-13/16 5-31/32 ZPLDJ--12-*
16 ZPLD--16-* 5-5/8 2-5/16 5-7/32 ZPLDJ--16-*
20 ZPLD--20-* 6-1/8 2-13/16 6-23/32 ZPLDJ--20-*
C20 ZPLD--C20-* 6-5/8 2-13/16 7-7/32 ZPLDJ--C20-*
24 ZPLD--24-* 6-5/8 3-5/16 7-7/32 ZPLDJ--24-*
Select C24 ZPLD--C24-* 7-1/8 3-5/16 7-23/32 ZPLDJ--C24-*
from 28 ZPLD--28-* 7-1/8 3-13/16 7-23/32 ZPLDJ--28-*
Table Below C28 ZPLD--C28-* 7-5/8 3-13/16 8-7/32 ZPLDJ--C28-*
and
Substitute 12 ZPLDL--12-* 7-5/8 1-13/16 8-7/32 ZPLDLJ--12-*
Symbol No. 16 ZPLDL--16-* 7-7/8 2-5/16 8-15/32 ZPLDLJ--16-*
for Delta 20 ZPLDL--20-* 8-3/8 2-13/16 8-31/32 ZPLDLJ--20-*
C20 ZPLDL--C20-* 8-7/8 2-13/16 9-15/32 ZPLDLJ--C20-*
24 ZPLDL--24-* 8-7/8 3-5/16 9-15/32 ZPLDLJ--24-*
C24 ZPLDL--C24-* 9-3/8 3-5/16 9-31/32 ZPLDLJ--C24-*
28 ZPLDL--28-* 9-1/8 3-13/16 9-23/32 ZPLDLJ--28-*
C28 ZPLDL--C28-* 9-5/8 3-13/16 10-7/32 ZPLDLJ--C28-*
Straight Plug
With Standard Compression Nut
To specify plug with environmental cover,
change third letter in Part No. “L’ to “E’.
Example: ZPLD changes to ZPED.
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.937 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.937 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.437 to 1.500 24 24 24
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE Substitute the symbol number for the Delta
in the catalog number of plug. Example: ZPLD- -12-* for .500 to .625 Dia. Cable changes to ZPLD-10 12-*
To specify a complete plug, substitute the Dash No. of the contact insert selected, for the Asterisk (*) in the Catalog No. below.
WITH LONG CABLE ADAPTER
Types
ZPLD ZPED
A B
Safety wire holes
(3) .062 DIA.
C
C
Size Shell Cat. No. DIMENSIONS Catalog No.
Cable Size With Standard WITH STANDARD CABLE ADAPTER With Jack
Coupling Nut A B C D E Coupling Nut
12 ZPLM--12-* 6-1/8 1-13/16 6-23/32 2-3/8 1-3/4 ZPLMJ--12-*
16 ZPLM--16-* 6-7/16 2-5/16 7-1/32 3 2-1/4 ZPLMJ--16-*
20 ZPLM--20-* 7 2-13/16 7-19/32 3-3/4 2-3/4 ZPLMJ--20-*
C20 ZPLM--C20-* 7-1/2 2-13/16 8-3/32 3-3/4 2-3/4 ZPLMJ--C20-*
24 ZPLM--24-* 7-9/16 3-5/16 8-5/32 4-1/2 3-1/4 ZPLMJ--24-*
Select C24 ZPLM--C24-* 8-1/16 3-5/16 8-21/32 4-1/2 3-1/4 ZPLMJ--C24-*
from 28 ZPLM--28-* 8-1/8 3-13/16 8-23/32 5-1/8 3-3/4 ZPLMJ--28-*
Table Below C28 ZPLM--C28-* 8-5/8 3-13/16 9-7/32 5-1/8 3-3/4 ZPLMJ--C28-*
and
Substitute 12 ZPLML--12-* 8-3/8 1-13/16 8-31/32 2-3/8 1-3/4 ZPLMLJ--12-*
Symbol No. 16 ZPLML--16-* 8-11/16 2-5/16 9-9/32 3 2-1/4 ZPLMLJ--16-*
for Delta 20 ZPLML--20-* 9-1/4 2-13/16 9-27/32 3-3/4 2-3/4 ZPLMLJ--20-*
C20 ZPLML--C20-* 9-3/4 2-13/16 10-11/32 3-3/4 2-3/4 ZPLMLJ--C20-*
24 ZPLML--24-* 9-13/16 3-5/16 10-13/32 4-1/2 3-1/4 ZPLMLJ--24-*
C24 ZPLML--C24-* 10-5/16 3-5/16 10-29/32 4-1/2 3-1/4 ZPLMLJ--C24-*
28 ZPLML--28-* 10-1/8 3-13/16 10-23/32 5-1/8 3-3/4 ZPLMLJ--28-*
C28 ZPLML--C28-* 10-5/8 3-13/16 11-7/32 5-1/8 3-3/4 ZPLMLJ--C28-*
Straight Plug
With Mechanical Clamp Nut
To specify plug with environmental cover,
change third letter in Part No. “L’ to “E’.
Example: ZPLM changes to ZPEM.
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.375 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE Substitute the symbol number for the Delta
in the catalog number of plug. Example: ZPLM- -12-* for .500 to .625 Dia. Cable changes to ZPLM-10 12-*
To specify a complete plug, substitute the Dash No. of the contact insert selected, for the Asterisk (*) in the Catalog No. below.
WITH LONG CABLE ADAPTER
Types
ZPLM ZPEM
Amphenol
INDUSTRIAL
11
STAR-LINE®
12
STAR-LINE®
C
B
G SQ.
Safety Wire Holes (3) .062 Dia.
A
H SQ.
J Hole Dia.
Straight Plug
With Conduit Adapter (for exible conduit ttings)
To specify a complete plug, substitute the dash no. of the contact insert selected for the asterisk (*)
In the catalog no. below.
A PLUG WITH JACK COUPLING NUT SHOULD BE USED WITH INSERTS HAVING 37 OR MORE CONTACTS.
Shell Open Catalog No. DIMENSIONS Catalog No.
Size Back With Standard With Jack
Coupling Nut A B C G H J Coupling Nut
12 ZPLP-12-* 2-3/8 1-13/16 2-31/32 1-17/64 1-5/8 3/16 ZPLPJ- 12-*
16 ZPLP-16-* 2-13/32 2-5/16 3 1-11/16 2-1/8 7/32 ZPLPJ- 16-*
20 ZPLP-20-* 2-7/16 2-13/16 3-1/32 2-3/32 2-5/8 9/32 ZPLPJ- 20-*
C20 ZPLP-C20-* 2-15/16 2-13/16 3-17/32 2-3/32 2-5/8 9/32 ZPLPJ- C20-*
24 ZPLP-24-* 2-15/32 3-5/16 3-1/16 2-17/32 3-1/8 11/32 ZPLPJ- 24-*
C24 ZPLP-C24-* 2-31/32 3-5/16 3-9/16 2-17/32 3-1/8 11/32 ZPLPJ- C24-*
28 ZPLP-28-* 2-15/32 3-13/16 3-1/16 3-1/32 3-3/4 11/32 ZPLPJ- 28-*
C28 ZPLP-C28-* 2-31/32 3-13/16 3-9/16 3-1/32 3-3/4 11/32 ZPLPJ- C28-*
Use with
or without
Potting
Sleeve
To specify plug with environmental cover,
change third letter in Part No. “L” to “E”.
Example: ZPLT changes to ZPET.
Shell Size Catalog No. Catalog No.
Size Conduit With Standard With Jack
Coupling Nut A B C D Coupling Nut
12 3/4 ZPLT-2 12-* 4-1/4 1-13/16 4-27-32 3/4 ZPLTJ-2 12-*
16 1-1/4 ZPLT-4 16-* 4-3/8 2-5/16 4-31/32 1-1/4 ZPLTJ-4 16-*
20 1-1/2 ZPLT-5 20-* 4-1/2 2-13/16 5-3/32 1-1/2 ZPLTJ-5 20-*
C20 1-1/2 ZPLT-5 C20-* 5 2-13/16 5-19/32 1-1/2 ZPLTJ-5 C20-*
24 2 ZPLT-6 24-* 4-5/8 3-5/16 5-7/32 2 ZPLTJ-6 24-*
C24 2 ZPLT-6 C24-* 5-1/8 3-5/16 5-23/32 2 ZPLTJ-6 C24-*
28 2-1/2 ZPLT-7 28-* 5-3/32 3-13/16 5-11/16 2-1/2 ZPLTJ-7 28-*
C28 2-1/2 ZPLT-7 C28-* 5-19/32 3-13/16 6-3/16 2-1/2 ZPLTJ-7 C28-*
DIMENSIONS
Types
ZPLT ZPET
A
D
NPT Thread
Size
B
Safety Wire Holes
(3) .062 DIA.
C
Straight Male Plug
Panel Mount
To specify a complete plug, substitute the dash no. of the contact insert selected for the asterisk (*) in the catalog no. below.
A PLUG WITH JACK COUPLING NUT SHOULD BE USED WITH INSERTS HAVING 37 OR MORE CONTACTS.Types
ZPLP ZPEP
To specify plug with environmental cover,
change third letter in Part No. “L” to “E”.
Example: ZPLP changes to ZPEP.
Amphenol
INDUSTRIAL
13
STAR-LINE®
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
12 ZPLKL--12-* 7-5/8 1-13/16 8-7/32 ZPLKJ--12-*
16 ZPLKL--16-* 7-7/8 2-5/16 8-15/32 ZPLKJ--16-*
20 ZPLKL--20-* 8-3/8 2-13/16 8-31/32 ZPLKJ--20-*
C20 ZPLKL--C20-* 8-7/8 2-13/16 9-15/32 ZPLKJ--C20-*
24 ZPLKL--24-* 8-7/8 3-5/16 9-15/32 ZPLKJ--24-*
C24 ZPLKL--C24-* 9-3/8 3-5/16 9-31/32 ZPLKJ--C24-*
28 ZPLKL--28-* 9-1/8 3-13/16 9-23/32 ZPLKJ--28-*
C28 ZPLKL--C28-* 9-5/8 3-13/16 10-7/32 ZPLKJ--C28-*
Select
from
Table Below
and Substi-
tute
Symbol No.
for Delta WITH LONG CABLE ADAPTER
Types
ZPLK ZPEK
B
Safety wire holes
(3) .062 DIA.
A
See cable grip
components page
for basket weave
grip lengths
C
Size Shell Catalog No. DIMENSIONS Catalog No.
Cable Size With Standard WITH STANDARD CABLE ADAPTER With Jack
Coupling Nut A B C Coupling Nut
12 ZPLK--12-* 5-3/8 1-13/16 5-31/32 ZPLKJ--12-*
16 ZPLK--16-* 5-5/8 2-5/16 6-7/32 ZPLKJ--16-*
20 ZPLK--20-* 6-1/8 2-13/16 6-23/32 ZPLKJ--20-*
C20 ZPLK--C20-* 6-5/8 2-13/16 7-7/32 ZPLKJ--C20-*
24 ZPLK--24-* 6-5/8 3-5/16 7-7/32 ZPLKJ--24-*
C24 ZPLK--C24-* 7-1/8 3-5/16 7-23/32 ZPLKJ--C24-*
28 ZPLK--28-* 7-1/8 3-13/16 7-23/32 ZPLKJ--28-*
C28 ZPLK--C28-* 7-5/8 3-13/16 8-7/32 ZPLKJ--C28-*
Straight Plug
With Basketweave Cable Grip
To specify a complete plug, substitute the Dash No. of the contact insert selected for the asterisk (*) in the catalog no. below.
A PLUG WITH JACK COUPLING NUT SHOULD BE USED WITH INSERTS HAVING 37 OR MORE CONTACTS
To specify plug with environmental cover,
change third letter in Part No. “L” to “E”.
Example: ZPLK changes to ZPEK.
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE Substitute the symbol number for the Delta
in the catalog number of plug. Example: ZPLK- -12-* for .500 to .625 Dia. Cable changes to ZPLK-10 12-*
14
STAR-LINE®
In-Line Receptacle
With Mechanical Clamp Nut
To specify a complete receptacle, substitute the dash no. of the contact insert selected for the asterisk (*)
in the catalog no. below.
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE
Substitute the symbol number for the Delta in the catalog number of plug.
Example: ZRLM--12-* for .500 to .625 Dia. cable changes to ZRLM-10 12-*
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
Types
ZRLM ZREM
To specify receptacle with threaded
environmental cover, change third letter
in Part No. “L” to “E”.
Example: ZRLM changes to ZREM.
DIMENSIONS
Size Shell Cat. No.
Cable Size A C D E F G
12 ZRLM--12-* 6-1/8 6-3/4 1-3/4 1-61/64 1-3/4 2-3/8
16 ZRLM--16-* 6-7/16 7-1/16 2-1/4 2-31/64 2-1/4 3
20 ZRLM--20-* 7 7-5/8 2-3/4 3-1/32 2-3/4 3-3/4
C20 ZRLM--C20-* 7-1/2 8-1/8 2-3/4 3-1/32 2-3/4 3-3/4
24 ZRLM--24-* 7-9/16 8-3/16 3-1/4 3-9/16 3-1/4 4-1/2
C24 ZRLM--C24-* 8-1/16 8-11/16 3-1/4 3-9/16 3-1/4 4-1/2
28 ZRLM--28-* 8-1/8 8-3/4 3-3/4 4-1/16 3-3/4 5-1/8
C28 ZRLM--C28-* 8-5/8 9-1/4 3-3/4 4-1/16 3-3/4 5-1/8
WITH LONG CABLE ADAPTER
12 ZRLML--12-* 8-3/8 9 1-3/4 1-61/64 1-3/4 2-3/8
16 ZRLML--16-* 8-11/16 9-5/16 2-1/4 2-31/64 2-1/4 3
20 ZRLML--20-* 9-1/4 9-7/8 2-3/4 3-1/32 2-3/4 3-3/4
C20 ZRLML--C20-* 9-3/4 10-3/8 2-3/4 3-1/32 2-3/4 3-3/4
24 ZRLML--24-* 9-13/16 10-7/16 3-1/4 3-9/16 3-1/4 4-1/2
C24 ZRLML--C24-* 10-5/16 10-15/16 3-1/4 3-9/16 3-1/4 4-1/2
28 ZRLML--28-* 10-1/8 10-3/4 3-3/4 4-1/16 3-3/4 5-1/8
C28 ZRLML--C28-* 10-5/8 11-1/4 3-3/4 4-1/16 3-3/4 5-1/8
Select
from
Table Below
and Substi-
tute
Symbol No.
for Delta
A
Amphenol
INDUSTRIAL
15
STAR-LINE®
In-Line Receptacle
With Standard Compression Nut
To specify a complete receptacle, substitute the dash no. of the contact insert selected for the asterisk (*)
in the catalog no. below.
Dimensions
Size Shell Cat. No.
Cable Size A C D E
12 ZRLD-- 12-* 5-3/8 6 1-3/4 1-61/64
16 ZRLD-- 16-* 5-5/8 6-1/4 2-1/4 2-31/64
20 ZRLD-- 20-* 6-1/8 6-3/4 2-3/4 3-1/32
C20 ZRLD-- C20-* 6-5/8 7-1/4 2-3/4 3-1/32
24 ZRLD-- 24-* 6-5/8 7-1/4 3-1/4 3-9/16
C24 ZRLD-- C24-* 7-1/8 7-3/4 3-1/4 3-9/16
28 ZRLD-- 28-* 7-1/8 7-3/4 3-3/4 4-1/16
C28 ZRLD-- C28-* 7-5/8 8-1/4 3-3/4 4-1/16
12 ZRLDL--12-* 7-5/8 8-1/4 1-3/4 1-61/64
16 ZRLDL--16-* 7-7/8 8-1/2 2-1/4 2-31/64
20 ZRLDL--20-* 8-3/8 9 2-3/4 3-1/32
C20 ZRLDL--C20-* 8-7/8 9-1/2 2-3/4 3-1/32
24 ZRLDL--24-* 8-7/8 9-1/2 3-1/4 3-9/16
C24 ZRLDL--C24-* 9-3/8 10 3-1/4 3-9/16
28 ZRLDL--28-* 9-1/8 9-3/4 3-3/4 4-1/16
C28 ZRLDL--C28-* 9-5/8 10-1/4 3-3/4 4-1/16
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
Select
from
Table Below
and Substi-
tute
Symbol No.
for Delta
With Long Cable Adapter
Types
ZRLD ZRED
Safety Wire Holes
(3).062 Dia.
D
E
A
C
To specify receptacle with threaded
environmental cover, change third letter
in Part No. “L” to “E”.
Example: ZRLD changes to ZRED.
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE
Substitute the symbol number for the Delta in the catalog number of plug.
Example: ZRLD--12-* for .500 to .625 Dia. cable changes to ZRLD-10 12-*
16
STAR-LINE®
Safety Wire Holes
(3).062 Dia.
D
E
A
See cable grip
components page
for basket weave
grip lengths
Types
ZRLK ZREK
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
In-Line Receptacle
With Basketweave Cable Grip
To specify a complete receptacle, substitute the dash no. of the contact insert selected for the
asterisk (*) in the catalog no. below.
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE
Substitute the symbol number for the Delta in the catalog number of plug.
Example: ZRLK--12-* for .500 to .625 Dia. cable changes to ZRLK-10 12-*
Dimensions
Size Shell Cat. No.
Cable Size A C D E
12 ZRLK-- 12-* 5-3/8 6 1-3/4 1-61/64
16 ZRLK-- 16-* 5-5/8 6-1/4 2-1/4 2-31/64
20 ZRLK-- 20-* 6-1/8 6-3/4 2-3/4 3-1/32
C20 ZRLK-- C20-* 6-5/8 7-1/4 2-3/4 3-1/32
24 ZRLK-- 24-* 6-5/8 7-1/4 3-1/4 3-9/16
C24 ZRLK-- C24-* 7-1/8 7-3/4 3-1/4 3-9/16
28 ZRLK-- 28-* 7-1/8 7-3/4 3-3/4 4-1/16
C28 ZRLK-- C28-* 7-5/8 8-1/4 3-3/4 4-1/16
12 ZRLKL--12-* 7-5/8 8-1/4 1-3/4 1-61/64
16 ZRLKL--16-* 7-7/8 8-1/2 2-1/4 2-31/64
20 ZRLKL--20-* 8-3/8 9 2-3/4 3-1/32
C20 ZRLKL--C20-* 8-7/8 9-1/2 2-3/4 3-1/32
24 ZRLKL--24-* 8-7/8 9-1/2 3-1/4 3-9/16
C24 ZRLKL--C24-* 9-3/8 10 3-1/4 3-9/16
28 ZRLKL--28-* 9-1/8 9-3/4 3-3/4 4-1/16
C28 ZRLKL--C28-* 9-5/8 10-1/4 3-3/4 4-1/16
Select
from
Table Below
and Substi-
tute
Symbol No.
for Delta
With Long Cable Adapter
To specify receptacle with threaded
environmental cover, change third letter
in Part No. “L” to “E”.
Example: ZRLK changes to ZREK.
C
Amphenol
INDUSTRIAL
17
STAR-LINE®
Dimensions
Shell Size
Size Conduit Cat. No. A B C D E
12 3/4 ZRLT-2 12-* 4-1/4 3/4 4-7/8 1-3/8 1-61/64
16 1-1/4 ZRLT-4 16-* 4-3/8 1-1/4 5 2-1/4 2-15/32
20 1-1/2 ZRLT-5 20-* 4-1/2 1-1/2 5-1/8 2-3/4 3-1/32
C20 1-1/2 ZRLT-5 C20-* 5 1-1/2 5-5/8 2-3/4 3-1/32
24 2 ZRLT-6 24-* 4-5/8 2 5-1/4 3-1/4 3-9/16
C24 2 ZRLT-6 C24 5-1/8 2 5-3/4 3-1/4 3-9/16
28 2-1/2 ZRLT-7 28-* 5-3/32 2-1/2 5-23-32 3-3/4 4-1/16
C28 2-1/2 ZRLT-7 C28-* 5-19/32 2-1/2 6-7/32 3-3/4 4-1/16
In-Line Receptacle
With Conduit Adapter
(for exible conduit ttings)
To specify a complete receptacle, substitute the dash no. of the
contact insert selected, for the asterisk (*) in the catalog no. below.
To specify receptacle with threaded environmental cover, change third letter in part no. “L” to “E””.
Types
ZRLT ZRET
To specify receptacle with threaded
environmental cover, change third letter
in Part No. “L” to “E”.
Example: ZRLT changes to ZRET.
A
B
NPT
Thread
D
E
Safety Wire Holes
(3) .062 Dia.
C
B
NPT
Thread
18
STAR-LINE®
G
5/8
F
NMax panel thickness
when back mounted
using jack nut
plugs.**
1/16" Gasket Fits
front or back
of flange.
Square Flange Receptacle
To specify a complete receptacle, substitute the dash no. of the contact insert selected, for the asterisk (*)
in the catalog no. below.
Types
ZRLP ZRCP ZREP
Drill hole in panel 1/64” larger than Dimension “K” for front mounting or dimension “C” for back mounting
**Maximum panel thickness may be increased 1/8” when using Standard Coupling Nut Plugs.
E
hole
Dia.
A Sq.
B Sq.
L
J
3/16
C
Modified
Acme
thread
K
WITH THREADED ENVIRONMENTAL
COVER AND SASH CHAIN
WITH HINGED SPRING COVER
To specify receptacle with spring
door cover, change third letter
in part number from “L” to “C”.
Example: ZRLP changes to ZRCP.
To specify receptacle with threaded
environmental cover, change third
letter in part number from “L” to “E”.
Example: ZRLP changes to ZREP.
12 Use with ZRLP- 12-* 1-3/4 1-3/8 1-1/12 11/64 2-15/16 2-1/8 1 1-11/32 2-21/64 1/4
16 or without ZRLP- 16-* 2-1/4 1-11/16 2 13/64 2-15/16 2-1/8 1 1-27/32 2-21/64 1/4
20 Potting ZRLP- 20-* 2-3/4 2-3/32 2-1/2 7/32 2-15/16 2-3/16 1 2-11/32 2-21/64 1/4
C20 Sleeves ZRLP- C20-* 2-3/4 2-3/32 2-1/2 7/32 3-7/16 2-11/16 1-1/2 2-11/32 2-53/64 3/4
24 ZRLP- 24-* 3-1/4 2-17/32 3 9/32 2-15/16 2-3/16 1 2-27/32 2-21/64 1/4
C24 ZRLP- C24-* 3-1/4 2-17/32 3 9/32 3-7/16 2-11/16 1-1/2 2-27/32 2-53/64 3/4
28 ZRLP- 28-* 3-3/4 3-1/32 3-1/2 11/32 2-15/16 2-3/16 1 3-11/32 2-21/64 1/4
C28 ZRLP- C28* 3-3/4 3-1/32 3-1/2 11/32 3-7/16 2-11/16 1-1/2 3-11/32 2-53/64 3/4
DIMENSIONS
Shell Open WITH STANDARD CABLE ADAPTER
Size Back Catalog No. A B C* E F G J K L N
E
Hole Dia.
Amphenol
INDUSTRIAL
19
STAR-LINE®
A
G Max. Reversible clamps for
complete cable range
F
E hole Dia.1/16" Gasket fits
front or back of flange
B Sq.
D Sq.
H
E
Hole Dia.
Dimensions
Size Shell Catalog
Cable Size Number A B C D E F G H N
12 ZRLPM-- 12-* 6-1/8 1-3/4 6-3/4 1-3/8 11/64 1-3/4 2-3/8 1-1/2 1/4
16 ZRLPM-- 16-* 6-7/16 2-1/4 7-1/16 1-11/16 13/64 2-1/4 3 2 1/4
20 ZRLPM-- 20-* 7 2-3/4 7-5/8 2-3/32 7/32 2-3/4 3-3/4 2-1/2 1/4
C20 ZRLPM-- C20-* 7-1/2 2-3/4 8-1/8 2-3/32 7/32 2-3/4 3-3/4 2-1/2 3/4
24 ZRLPM-- 24-* 7-9/16 3-1/4 8-3/16 2-17/32 9/32 3-1/4 4-1/2 3 1/4
C24 ZRLPM-- C24-* 8-1/16 3-1/4 8-11/16 2-17/32 9/32 3-1/4 4-1/2 3 3/4
28 ZRLPM-- 28-* 8-1/8 3-3/4 8-3/4 3-1/32 11/32 3-3/4 5-1/8 3-1/2 1/4
C28 ZRLPM-- C28-* 8-5/8 3-3/4 9-1/4 3-1/32 11/32 3-3/4 5-1/8 3-1/2 3/4
With Long Cable Adapter
12 ZRLPML--12-* 8-3/8 1-3/4 9 1-3/8 11/64 1-3/4 2-3/8 1-1/2 1/4
16 ZRLPML--16-* 8-11/16 2-1/4 9-5/16 1-11/16 13/64 2-1/4 3 2 1/4
20 ZRLPML--20-* 9-1/4 2-3/4 9-7/8 2-3/32 7/32 2-3/4 3-3/4 2-1/2 1/4
C20 ZRLPML--C20-* 9-3/4 2-3/4 10-3/8 2-3/32 7/32 2-3/4 3-3/4 2-1/2 3/4
24 ZRLPML--24-* 9-13/16 3-1/4 10-7/16 2-17/32 9/32 3-1/4 4-1/2 3 1/4
C24 ZRLPML--C24-* 10-5/16 3-1/4 10-15/16 2-17/32 9/32 3-1/4 4-1/2 3 3/4
28 ZRLPML--28-* 10-1/8 3-3/4 10-3/4 3-1/32 11/32 3-3/4 5-1/8 3-1/2 1/4
C28 ZRLPML--C28-* 10-5/8 3-3/4 11-1/4 3-1/32 11/32 3-3/4 5-1/8 3-1/2 3/4
Type
ZRLPM ZRCPM ZREPM
Square Flange Receptacle
with Mechanical Clamp Nut
To specify a complete receptacle, substitute the dash no. of the contact insert selected, for the asterisk (*)
in the catalog no. below.
Select
from
Table Below
and Substi-
tute
Symbol No.
for Delta
C
N
To specify receptacle with
threaded environmental cover,
change third letter in Part No.
“L” to “E”.
Example: ZRLPM changes to
ZREPM.
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE
Substitute the symbol number for the Delta in the catalog number of plug.
Example: ZRLK--12-* for .500 to .625 Dia. cable changes to ZREK-10 12-*
To specify receptacle with spring
door cover, change third letter in
Part No. “L” to “C”.
Example: ZRLPM changes to
ZRCPM.
Drill hole in panel 1/64” larger
than Dimension “H” for back
mounting..
20
STAR-LINE®
Square Flange Receptacle
With Basketweave Cable Grip
To specify a complete receptacle, substitute the dash no. of the contact insert selected for the
asterisk (*) in the catalog no. below.
Dimensions
Size Shell Catalog
Cable Size Number A B C D E F G
12 ZRLPK-- 12-* 5-3/8 1-3/4 6 1-3/8 11/64 1-1/2 1/4
16 ZRLPK-- 16-* 5-5/8 2-1/4 6-1/4 1-11/16 13/64 2 1/4
20 ZRLPK-- 20-* 6-1/8 2-3/4 6-3/4 2-3/32 7/32 2-1/2 1/4
C20 ZRLPK-- C20-* 6-5/8 2-3/4 7-1/4 2-3/32 7/32 2-1/2 3/4
24 ZRLPK-- 24-* 6-5/8 3-1/4 7-1/4 2-17/32 9/32 3 1/4
C24 ZRLPK-- C24-* 7-1/8 3-1/4 7-3/4 2-17/32 9/3 3 3/4
28 ZRLPK-- 28-* 7-1/8 3-3/4 7-3/4 3-1/32 11/32 3-1/2 1/4
C28 ZRLPK-- C28-* 7-5/8 3-3/4 8-1/4 3-1/32 11/32 3-1/2 3/4
With Long Cable Adapter
12 ZRLPKL--12-* 7-5/8 1-3/4 8-1/4 1-3/8 11/64 1-1/2 1/4
16 ZRLPKL--16-* 7-7/8 2-1/4 8-1/2 1-11/16 13/64 2 1/4
20 ZRLPKL--20-* 8-3/8 2-3/4 9 2-3/32 7/32 2-1/2 1/4
C20 ZRLPKL--C20-* 8-7/8 2-3/4 9-1/2 2-3/32 7/32 2-1/2 3/4
24 ZRLPKL--24-* 8-7/8 3-1/4 9-1/2 2-17/32 9/32 3 1/4
C24 ZRLPKL--C24-* 9-3/8 3-1/4 10 2-17/32 9/32 3 3/4
28 ZRLPKL--28-* 9-1/8 3-3/4 9-3/4 3-1/32 11/32 3-1/2 1/4
C28 ZRLPKL--C28-* 9-5/8 3-3/4 10-1/4 3-1/32 11/32 3-1/2 1/4
Select
from
Table Below
and Substi-
tute
Symbol No.
for Delta
A
F
C
G
E
Hole Dia.
To specify receptacle
with threaded environ-
mental cover, change
third letter in Part No.
“L” to “E”.
Example: ZRLPK
changes to ZREPR.
To specify receptacle
with spring door cover,
change third letter in
Part No. “L” to “C”.
Example: ZRLPM
changes to ZRCPR.
Shell Shell Shells Shells Shells Shell Shell Shell Shells Shells
Cable Dia. 12 16 20 & C20 24 & C24 28 & C28 Cable Dia. 12 16 20 & C20 24 & C24 28 & C28
.062 to .125 02 1.500 to 1.625 26 26 26
.125 to .250 04 1.625 to 1.750 28 28 28
.250 to .375 06 06 1.750 to 1.875 30 30 30
.375 to .500 08 08 1.875 to 1.937 31
.500 to .625 10 10 10 1.875 to 2.000 32 32
.625 to .750 12 12 12 2.000 to 2.125 34 34
.750 to .875 14 14 14 2.125 to 2.250 36 36
.875 to .937 15 2.250 to 2.375 38 38
.875 to 1.000 16 16 16 2.375 to 2.437 39
1.000 to 1.125 18 18 18 2.437 to 2.500 40
1.125 to 1.250 20 20 20 2.500 to 2.625 42
1.250 to 1.375 22 22 22 2.625 to 2.750 44
1.375 to 1.437 23 2.750 to 2.875 46
1.375 to 1.500 24 24 24
Drill hole in panel 1/64” larger
than Dimension “H” for back
mounting..
OIL-RESISTANT RUBBER GROMMETS—SYMBOL NUMBERS OF SIZES AVAILABLE
Substitute the symbol number for the Delta in the catalog number of plug.
Example: ZRLK--12-* for .500 to .625 Dia. cable changes to ZREK-10 12-*
ZRLPK, ZRCPK, ZREPK
Amphenol
INDUSTRIAL
21
STAR-LINE®
Shell Hub Dimensions
Size Size† Cat. No. A B C D E F G H
3/4 ZRLBB- 2 12-* 5-1/4 4-5/8 4-3/16 3-9/16 2-3/8 2-13/16 2-7/16 9/32
1 ZRLBB-3 12-* 5-1/4 4-5/8 4-3/16 3-9/16 2-3/8 2-13/16 2-7/16 9/32
1 ZRLBB-3 16-* 5-1/4 4-5/8 4-3/16 3-9/16 2-3/8 2-15/16 2-17/32 9/32
1-1/4 ZRLBB-4 16-* 5-1/4 4-5/8 4-3/16 3-9/16 2-5/8 2-15/16 2-17/32 9/32
1-1/2 ZRLBB-5 16-* 5-1/4 4-5/8 4-3/16 3-9/16 2-5/8 2-15/16 2-17/32 9/32
1-1/4 ZRLBB-4 20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-39/64 3 9/32
1-1/2 ZRLBB-5 20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-39/64 3 9/32
2 ZRLBB-6 20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-39/64 3 9/32
1-1/4 ZRLBB-4 C20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-39/64 3-3/8 9/32
1-1/2 ZRLBB-5 C20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-39/64 3-3/8 9/32
2 ZRLBB-6 C20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-39/64 3-3/8 9/32
2-1/2 ZRLBB-7 24-* 8 7 3-3/4 3-33/64 2-19/64 7/16
3 ZRLBB-8 24-* 8 7 4-1/2 3-33/64 2-19/64 7/16
2-1/2 ZRLBB-7 C24-* 8 7 3-3/4 3-33/64 2-21-32 7/16
3 ZRLBB-8 C24-* 8 7 4-1/2 3-33-64 2-21-32 7/16
2-1/2 ZRLBB-7 28-* 8 7 3-3/4 3-1/2 2-7/64 7/16
3 ZRLBB-8 28-* 8 7 4-1/2 3-1/2 2-7/64 7/16
2-1/2 ZRLBB-7 C28-* 8 7 3-3/4 3-1/2 2-15/32 7/16
3 ZRLBB-8 C28-* 8 7 4-1/2 3-1/2 2-15/32 7/16
Receptacle Mounted
to Junction Box
With Angle Adapter
See
Drawing
Below
12
16
20
C20
24
C24
28
C28
Types
ZRLBB ZRCBB ZREBB
SHELL SIZES 12 - 16 - 20 - C20 SHELL SIZES 24 - C24 - 28 - C28
To specify a complete receptacle, substitute the dash no. of the contact insert selected,
for the asterisk (*) in the catalog no. below.
HUB
SIZE
D
C
B
A
H
A C DB
EF
G
8H
9-1/2
5/8
5/8
6-3/4
HUB
SIZE 5-3/8
87
To specify receptacle with spring
door cover, change third letter
in part number from “L” to “C”.
Example: ZRLBB changes to ZRCBB
To specify receptacle with threaded
environmental cover, change third letter
in part number from “L” to “E”.
Example: ZRLBB changes to ZREBB
WITH THREADED ENVIRONMENTAL
COVER AND SASH CHAIN
WITH HINGED SPRING COVER
† Other hub sizes are available. Consult Amphenol Industrial Operations.
Receptacle Mounted
to Junction Box
With Straight Adapter
To specify a complete receptacle, substitute the dash no. of the contact insert selected,
for the asterisk (*) in the catalog no. below. Types
ZRLA ZRCA ZREA
Shell Hub Dimensions
Size Size† Cat. No. A B C D E F G H
3/4 ZRLA- 2 12-* 5-1/4 4-5/8 4-3/16 3-9/16 2-3/8 1-27/32 1 9/32
1 ZRLA-3 12-* 5-1/4 4-5/8 4-3/16 3-9/16 2-3/8 1-27/32 1 9/32
1 ZRLA-3 16-* 5-1/4 4-5/8 4-3/16 3-9/16 2-3/8 1-27/32 1 9/32
1-1/4 ZRLA-4 16-* 5-1/4 4-5/8 4-3/16 3-9/16 2-5/8 1-27/32 1 9/32
1-1/2 ZRLA-5 16-* 5-1/4 4-5/8 4-3/16 3-9/16 2-5/8 1-27/32 1 9/32
1-1/4 ZRLA-4 20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-1/16 1-7/32 9/32
1-1/2 ZRLA-5 20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-1/16 1-7/32 9/32
2 ZRLA-6-20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 3-1/16 1-7/32 9/32
1-1/4 ZRLA-4 C20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 2-9/16 1-7/32 9/32
1-1/2 ZRLA-5 C20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 2-9/16 1-7/32 9/32
2 ZRLA-6 C20-* 6 5-1/4 4-1/2 3-7/8 3-3/4 2-9/16 1-7/32 9/32
2-1/2 ZRLA-7 24-* 8 7 3-3/4 2-11/32 1-1/2 7/16
3 ZRLA-8 24-* 8 7 4-1/2 2-11/32 1-1/2 7/16
2-1/2 ZRLA-7 C24-* 8 7 3-3/4 2-27/32 1-1/2 7/16
3 ZRLA-8 C24-* 8 7 4-1/2 3-33-64 1-1/2 7/16
2-1/2 ZRLA-7 28-* 8 7 3-3/4 2-27/32 1-1/2 7/16
3 ZRLA-8 28-* 8 7 4-1/2 2-9/32 1-1/2 7/16
2-1/2 ZRLA-7 C28-* 8 7 3-3/4 2-25/32 1-1/2 7/16
3 ZRLA-8 C28-* 8 7 4-1/2 2-25/32 1-1/2 7/16
See
Drawing
Below
12
16
20
C20
24
C24
28
C28
SHELL SIZES 12 - 16 - 20 - C20 SHELL SIZES 24 - C24 - 28 - C28
To specify receptacle with spring
door cover, change third letter
in part number from “L” to “C”.
Example: ZRLA changes to ZRCA.
To specify receptacle with threaded
environmental cover, change third
letter in part number from “L” to “E”.
Example: ZRLA changes to ZREA.
WITH THREADED ENVIRONMENTAL
COVER AND SASH CHAIN
WITH HINGED SPRING COVER
HUB
SIZE
D
C
B
A
H
A C DB
E F
G
8H
9-1/2
5/8
5/8
6-3/4
HUB
SIZE 5-3/8
87
† Other hub sizes are available. Consult Amphenol Industrial Operations.
22
STAR-LINE®
Amphenol® Star-Line EX®
Product Instructions
Sections Contents:
Hazardous Location Page
Part Number Guide
EX Gland Code Guide
EX-13 Plug
EX-15 Inline Receptacle
EX-17 Panel Mount Receptacle
Familiarization & Assembly Information
Assembly & Termination
Mixing Instructions
Potting Instructions
23
Amphenol
INDUSTRIAL
STAR-LINE EX®
Intrinsic Safety ia
ib
ic
60079-11
60079-11
60079-11
Zone 0
Zone 1
Zone 2
iaD
ibD
61241-11
61241-11
Zone 20
Zone 21
1
2
3
Flameproof d 60079-1 Zone 1 2
Enclosure tD 61241-1 Zone 20, 21, 22
Purge & Pressurization px
py
pz
60079-2
60079-2
60079-2
Zone 1
Zone 1
Zone2
2
2
3
Pressurized pD 612441-4 Zone 21, 22
Increased Safety e 60079-7 Zone 1 2
Encapsulation ma
mb
60079-18
60079-18
Zone 0
Zone 1
maD
mbD
61241-18
61241-18
Zone 20
Zone 21
1
2
Oil Immersion o 60079-6 Zone 1 2
Powder Filled q 60079-5 Zone 1 2
Non Incendive nA, nC, nL, nR 60079-15 Zone 2 3
Rooms (draft) p 60079-13 Zone 1 2
Optical Radiation op.. 60079-28 Zone 0 1
Star-Line EX®
Hazardous Certification Information
Protection Method IEC/EN (ATEX) ATEX
Ex Code Gas Ex Code Dust Category
Temperature Ratings
UEC, EU (Europe)
Surface USA (NEC 505)
Temperature Canada
85 C (185 F) T6
Hazardous Area Equipment Mark
Markings for IEC/EN (ATEX)
IEC/ATEX (76/117/EEC)
Explosion protection
Protection method
Gas Group
Temperature Class
Equipment Protection Level
Ex d IIC T6 Gb
European (EU) ATEX Directive (94/9/EC)
CE marking
ID#ofNotiedBodyfortheQASystem
EU Explosive Atmosphere symbol
Above ground
Category
Gas, Dust
0518 II 2 GD
Ingress Protection
(IP) Ratings
0 No Protection 0 No Protection
1 Objects greater than 50mm 1 Vertically dripping water
2 Objects greater than 12mm 2 75 to 90 dripping water
3 Objects greater than 2.5mm 3 Sprayed water
4 Objects greater than 1mm 4 Splashed water
5 Dust-protected 5 Water jets
6 Dust-tight 6 Heavy Seas
7 Temporary immersion
First Number Second Number
Protection against solid bodies Protection against Liquids
6 Dust-tight
8Indeniteimmersion
HazLoc Hand Chart
*
*
*
Flameproof d 60079-1 2
Increased Safety e 60079-7 Zone 1 2
Note: Star-Line Ex®
productscertication
denoted with a *.
*
*
*
*
*
*
Enclosure tD 61241-1 Zone 20, 21 ,22
General Requirements
Class. of Hazardous Areas
Electrical Installations
60079-0
60079-1
60079-14
61241-0
450 C (842 F) T1
300 C (572 F) T2
200 C (392 F) T3
135 C (275 F) T4
100 C (212 F) T5
*
Inspection & Maintenance 60079-17
24
STAR-LINE EX®
Code Logic
Star-Line EX
EX 13 3
Product
Series
Prex
13 for Male Plug /
15 for Female Inline/
17 for Female Panel Mount
18 for Panel Mount Circular Flange
19 for Thru Bulkhead-Dual Mate Receptacle
“##” code for grommets
used w/ type “2” or “4”
hardware styles(See page 67)/
Letter code designation for
EEx d gland sizes
(see chart below)
Example:
EX-13-3-C-20-332PN
Male Plug with EEX gland for a cable with 0.95” 24.1mm O.D., 20ea #12awg/4mm2 male contacts.
EX-15-4-1620-332SN
Female Inline with basket weave grip for a cable with 0.95” 24.1mm O.D., 20ea #12awg/4mm2 female contacts.
EX-17-1-20-332SN
Female Panel Mount, 20ea #12awg/4mm2 female contacts.
EX-13-3-C-16-22PR-BS
Male Plug with EEX gland for an armored cable with 1.25”/31.75mm O.D., 4ea #4awg/25mm2 male contacts.
EX-17-3-C-16-22SR-BS
Female Panel Mount with cable adapter with and EEX gland for an armored and sheathed cable.
For Amphenol Star-Line product insert de-rating information
per the National Electric Code, please consult the Amphenol
Industrial website, www.amphenol-industrial.com. Chart is
located under LITERATURE tab.
C
Connector
Shell Size
(12, 16, 20,
24, 28, C20,
C24, C28)
20 332 P N -BS
Insert
Conguration
Contact Gender
P for Male Pin /
S for Female Socket
Optional
Alternate
Key
Positions
Termination Method
N for crimp contact /
R for pressure /
Blank for solder Cable Type
Omit if unarmored.
-BS or -BSR
(see cable type
in charts on next page)
-01
Hardware
Style
(see pgs.
25-28)
Callout to
designate
T5 temperature
rating
-20o C to 55o C
A376S
Blank Aluminum
S = Stainless Steel
B = Brass
Amphenol
INDUSTRIAL
STAR-LINE EX®
25
Cert. No.: IECEx SIR 10.0064X
CerticateNumber:SIRA03ATEX1101X
GOST-RCert.No.РОССMX.АИ96.В00012
(TUV) Brasil Cert. No. TUV 11.0147X
UL
®
File Number: E184393
Member: International
Association of Drilling Contractors
PRODUCT CERTIFICATIONS
AEx North American Hazloc Listing
Consult Factory for Listing No
CSA Listed
The Starline product family carries all of the
industry standard approvals ranging from
ATEX and IECEx to UL and CSA.
Starline EX offers a full range of hardware styles
including the use of EX rated cable glands, mechanical
clamps and gland nuts.
26
STAR-LINE EX®
EEx d Unarmored Armored & Sheathed Armored & Sheathed
Cable Cable Cable with reduced bore
Gland No deviation if -BS -BSR
Size Code Unarmored UA Standard OD-Reduced
Min Max Min Max Min Max Min Max
EEx d Cable Types
Star-Line EX Plug with
EX Gland
Amphenol offers an extensive line of explosion
proof and general duty cable glands. Consult
Amphenol Industrial Operations and ask for new
catalog 12-055, Amphenol Cable Glands and
Cord Grips.
Cables can be designed with a custom overmold
to any Amphenol cylindrical connector for
any industrial application. Consult Amphenol
Industrial Operations for further information.
A1 .1575 (4.0) .3307 (8.4) .1339 (3.4) .3307 (8.4) .3543 (9.0) .5315 (13.5) .2638 (6.7) .4055 (10.3)
A2 .2835 (7.2) .4606 (11.7) .2835 (7.2) .4606 (11.7) .4528 (11.5) .6299 (16.0) .3701 (9.4) .4921 (12.5)
A .3780 (9.6) .5512 (14.0) .3701 (9.4) .5512 (14.0) .6102 (15.5) .8307 (21.1) .4724 (12.0) .6929 (17.6)
B .5315 (13.5) .7874 (20.0) .5315 (13.5) .7874 (20.0) .7992 (20.3) 1.079 (27.4) .6614 (16.8) .9409 (23.9)
C .7677 (19.5) 1.035 (26.3) .7677 (19.5) 1.035 (26.3) 1.051 (26.7) 1.339 (34.0) .9134 (23.2) 1.201 (30.5)
C2 .9055 (23.0) 1.268 (32.2) .9055 (23.0) 1.268 (32.2) 1.299 (33.0) 1.598 (40.6) 1.126 (28.6) 1.425 (36.2)
D 1.110 (28.2) 1.504 (38.2) 1.106 (28.1) 1.504 (38.2) 1.551 (39.4) 1.839 (46.7) 1.370 (34.8) 1.669 (42.4)
D2 1.307 (33.2) 1.736 (44.1) 1.303 (33.1) 1.736 (44.1) 1.799 (45.7) 2.094 (53.2) 1.618 (41.1) 1.909 (48.5)
E 1.547 (39.3) 1.972 (50.1) 1.543 (39.2) 1.969 (50.0) 2.051 (52.1) 2.343 (59.5) 1.870 (47.5) 2.157 (54.8)
E2 1.839 (46.7) 2.205 (56.0) 1.839 (46.7) 2.205 (56.0) 2.299 (58.4) 2.591 (65.8) 2.118 (53.8) 2.409 (61.2)
F 2.059 (52.3) 2.441 (62.0) 2.051 (52.1) 2.441 (62.0) 2.551 (64.8) 2.843 (72.2) 2.370 (60.2) 2.677 (68.0)
F2 2.287 (58.1) 2.677 (68.0) 2.283 (58.0) 2.677 (68.0) 2.799 (71.1) 3.071 (78.0) 2.618 (66.5) 2.890 (73.4)
G 2.453 (62.3) 2.835 (72.0) 2.449 (62.2) 2.835 (72.0) 3.031 (77.0) 3.307 (84.0)
Amphenol
INDUSTRIAL
STAR-LINE EX®
27
Plug with Mechanical Clamp (POTTINGREQUIRED) EX-13-2 Style
Hardware
Dimension A* B* C D E F
Shell
12 7-7/16 (189) 3-9/16 (91) 2-1/8 (54) 2 (51) 15/16 (24) 2-3/8 (60)
16 9-1/2 (241) 3-9/16 (91) 2-5/8 (67) 2-1/16 (52) 1-7/16 (37) 3 (76)
20 9-9/16 (243) 3-9/16 (91) 3-1/8 (79) 2-1/8 (54) 1-15/16 (49) 3-3/4 (95)
24 9-5/8 (245) 3-9/16 (91) 3-5/8 (92) 2-3/16 (56) 2-7/16 (62) 4-1/2 (114)
28 9-11/16 (246) 3-9/16 (91) 4-1/8 (105) 2 1/4 (57) 2-7/8 (73) 5-1/8 (130)
Plug with EEx d Gland (POTTINGISNOTREQUIRED) EX-13-3 Style
Note: ‘D’ Dimension varies according to cable gland. Detailed cable dimensions and type required.
Gland is included with the connector.
Dimension A* B* C Gland
Shell Thread
12 6-1/16 (154) 3-9/16 (91) 2-1/8 (54) M25
16 8-1/16 (205) 3-9/16 (91) 2-5/8 (67) M40
20 8-1/16 (205) 3-9/16 (91) 3-1/8 (79) M50
24 8-1/16 (205) 3-9/16 (91) 3-5/8 (92) M63
28 8-1/16 (205) 3-9/16 (91) 4-1/8 (105) M75
Plug with Basketweave Cable Grip (POTTINGREQUIRED) EX-13-4 Style
Dimension A* B* C D E F G
Shell
12 6-1/16 (154) 3-9/16 (91) 2-1/8 (54) 1-1/4 (32) 15/16 (24) 1-9/32 (33) 8 (203)
16 8-1/16 (205) 3-9/16 (91) 2-5/8 (67) 1-1/4 (32) 1-7/16 (37) 1-25/32 (45) 10-1/2 (267)
20 8-1/16 (205) 3-9/16 (91) 3-1/8 (79) 1-1/4 (32) 1-15/16 (49) 2-9/32 (58) 14-1/2 (368)
24 8-1/16 (205) 3-9/16 (91) 3-5/8 (92) 1-1/4 (32) 2-7/16 (62) 2-25/32 (71) 17-1/2 (445)
28 8-1/16 (205) 3-9/16 (91) 4-1/8 (105) 1-1/4 (32) 2-7/8 (73) 3-9/32 (83) 19 (483)
DB
C
(MAX)
A
E
F
G (MAX) D
A
B
C
(MAX)
F
(MAX)
E (MAX)
A (NOM)
B
C
(MAX)
D
*Notes: For “C” length inserts, add 1/2” to both dimensions “A” & “B”.
(MAX)
28
STAR-LINE EX®
In-line Receptacle with Mechanical Clamp (POTTINGREQUIRED) EX-15-2 Style
In-line Receptacle with EEx d Gland (POTTINGISNOTREQUIRED) EX-15-3 Style
Note: ‘D’ Dimension varies according to cable gland. Detailed cable dimensions and type required.
Gland is included with the connector.
In-line Receptacle with Basketweave Cable Grip (POTTINGREQUIRED) EX-15-4 Style
Dimension A* B* C D E F
Shell
12 7 (178) 1-7/16 (37) 1-1/2 (38) 2 (51) 15/16 (24) 2-3/8 (60)
16 9-1/16 (230) 1-7/16 (37) 2 (51) 2-1/16 (52) 1-7/16 (37) 3 (76)
20 9-1/8 (232) 1-7/16 (37) 2-1/2 (64) 2-1/8 (54) 1-15/16 (49) 3-3/4 (95)
24 9-3/16 (233) 1-7/16 (37) 3 (76) 2-3/16 (56) 2-7/16 (62) 4-1/2 (114)
28 9-1/4 (235) 1-7/16 (37) 3-1/2 (89) 2-1/4 (57) 2-7/8 (73) 5-1/8 (130)
Dimension A* B* C Gland
Shell Thread
12 5-5/8 (143) 1-7/16 (37) 1-1/2 (38) M25
16 7-5/8 (194) 1-7/16 (37) 2 (51) M40
20 7-5/8 (194) 1-7/16 (37) 2-1/2 (64) M50
24 7-5/8 (194) 1-7/16 (37) 3 (76) M63
28 7-5/8 (194) 1-7/16 (37) 3-1/2 (89) M75
*Notes: For “C” length inserts, add 1/2” to both dimensions “A” & “B”.
Dimension A* B* C D E F G
Shell
12 6-1/4 (159) 1-7/16 (37) 1-1/2 (38) 1-1/4 (32) 15/16 (24) 1-9/32 (33) 8 (203)
16 8-1/4 (210) 1-7/16 (37) 2 (51) 1-1/4 (32) 1-7/16 (37) 1-25/32 (45) 10-1/2 (267)
20 8-1/4 (210) 1-7/16 (37) 2-1/2 (64) 1-1/4 (32) 1-15/16 (49) 2-9/32 (58) 14-1/2 (368)
24 8-1/4 (210) 1-7/16 (37) 3 (76) 1-1/4 (32) 2-7/16 (62) 2-25/32 (71) 17-1/2 (445)
28 8-1/4 (210) 1-7/16 (37) 3-1/2 (89) 1-1/4 (32) 2-7/8 (73) 3-9/32 (83) 19 (483)
A
B
CE
DF (MAX)
C
B
A
DF (MAX)
G
(MAX)
E
C
D
A
B
(MAX)
(MAX)
Amphenol
INDUSTRIAL
STAR-LINE EX®
29
Panel Mount Receptacle (POTTINGREQUIRED) EX-17-1 Style
Dimension A* B* C D E F
Shell
12 4 7/16 1.765 1-1/2 (38) 1.654 (42) 2-1/4 (57) M40
16 4 7/16 1.765 2 (51) 2.047 (52) 2-5/8 (67) M50
20 4 7/16 1.765 2-1/2 (64) 2.441 (62) 3 (76) M63
24 4 7/16 1.765 3 (76) 2.835 (72) 3-1/2 (89) M75
28 4 7/16 1.765 3-1/2 (89) 3.228 (82) 4 (102) M90
Fixed In-Line Receptacle with Mechanical Clamp (POTTINGREQUIRED) EX-17-2 Style
Dimension A* B* C D E F
Shell
12 7 (178) 1-7/16 (27) 1-1/2 (38) 2 (51) 5/16 (24) 2-3/8 (60)
16 9-1/16 (230) 1-7/16 (27) 2 (51) 2-1/16 (52) 1-7/16 (37) 3 (76)
20 9-1/8 (229) 1-7/16 (27) 2-1/2 (64) 2-1/8 (54) 1-15/16 (49) 3-3/4 (95)
24 9-3/16 (233) 1-7/16 (27) 3 (76) 2-3/16 (56) 2-7/16 (62) 4-1/2 (114)
28 9-1/4 (235) 1-7/16 (27) 3-1/2 (89) 2-1/4 (57) 2-7/8 (73) 5-1/8 (130)
Fixed In-Line Receptacle with EEx d Gland (POTTINGISNOTREQUIRED) EX-17-3 Style
Note: ‘D’ Dimension varies according to cable gland. Detailed cable dimensions and type required.
Gland is included with the connector.
*Notes: For “C” length inserts, add 1/2” to both dimensions “A” & “B”.
Dimension A* B* C Gland
Shell Thread
12 5-5/8 (143) 1-7/16 (37) 1-1/2 (38) M25
16 7-7/8 (194) 1-7/16 (37) 2 (51) M40
20 7-7/8 (194) 1-7/16 (37) 1-/12 (64) M50
24 7-7/8 (194) 1-7/16 (37) 3 (76) M63
28 7-7/8 (194) 1-7/16 (37) 3-1/2 (89) M75
Fixed In-Line Receptacle with Basketweave Cable Grip (POTTINGREQUIRED) EX-17-4 Style
Dimension A* B* C D E F G
Shell
12 6-1/4 (159) 1-7/16 (27) 1-1/2 (38) 1-1/4 (32) 15/16 (24) 1-9/32 (33) 8 (203)
16 8-1/4 (210) 1-7/16 (27) 2 (51) 1-1/4 (32) 1-7/16 (37) 1-25/32 (45) 10-1/2 (267)
20 8-1/4 (210) 1-7/16 (27) 2-1/2 (64) 1-1/4 (32) 1-15/16 (49) 2-9/32 (58) 14-1/2 (368)
24 8-1/4 (210) 1-7/16 (27) 3 (76) 1-1/4 (32) 2-7/16 (62) 2-25/32 (71) 17-1/2 (445)
28 8-1/4 (210) 1-7/16 (27) 3-1/2 (89) 1-1/4 (32) 2-7/8 (73) 3-9/32 (83) 19 (483)
A
B
CE
DF (MAX)
C
B
A
DF (MAX)
G
(MAX)
E
#10 (M5)
A
BF
(THREAD)
C
E
Square
D
Square 23/32
(MIN. FULL
THREAD)
C
D
A
B
(MAX)
(MAX)
30
STAR-LINE EX®
Amphenol
INDUSTRIAL
STAR-LINE EX®
31
Description of equipment
The Star-line EX series of connectors is comprised of metallic bodied plug and receptacle shells, to form
inline cable connections. Externally the main bodies are fitted with suitably certified cable glands. In-
ternally the main bodies each contain an insulator insert fitted with solder or pressure type contacts of
either a pin or socket variety. The plug and receptacle shells together form an in-line connector. When
connected together they form a spigotted flamepath and are mechanically interlocked by means of a
threaded nut retained by a grub screw.
Additionally, the receptacle connector is available in a bulkhead mounted version that contains an exter-
nally threaded flamepath for mounting to certified EX enclosures with suitable internal mating thread.
This variety of bulkhead mount connector, must be internally potted, as described within this document.
The range is comprised of seven body (forms) sizes, each with a number of pin/socket size combina-
tions between 1 and 143 contacts. The connector shell size, pin configuration and rating are reflected
in the individual type designations.
Design Option are described below and include, alternative keying options, and pin or sleeve contacts in
either the plug or receptacle bodies.
Part Number Code Logic:EX
(a) - (b) - (c) - (d)- (e) - (f)(g)(h)(j) - (k)
Connector series type designation EX
Shell material
(a)
Aluminium (default, omit code)
B-Brass
S-Stainless steel
Shell configuration
(b)
13- Inline Receptacle, w/ accompanying blanking cap
15- Inline Plug, w/ accompanying blanking cap.
17 - Flange Mount Receptacle, w/ accompanying blanking cap.
18 - Circular Bulkhead Mount Receptacle, w/ cap.
Cable Adapter style
(c)
1– Bulkhead Mount (w/ potting adapter; requires potting)
2– Mechanical Clamp (requires potting)
3– Threaded for use with EX certified Gland
4– Basketweave Grip (requires potting)
Grommet ID
(d)
See catalog for available sizes and codes
Shell Size
(e)
12, 16, 20, C20, 24, C24, 28, C28
Contact Insulation
(f)
See catalog for configurations
Contact Gender
(g)
P - Pin, S - Socket
Termination Style
(h)
N - Crimp, R - Pressure
Insert Rotation
(j)
Normal (default, omit code)
For alternates, refer to catalog
Planned Additions
(k)
Certified Variations
32
STAR-LINE EX®
1. Read manufacturer’s assembly instructions before actually
starting to assemble connectors. Besides the matter of
instruction on correct procedures, there are two important
reasons for this preliminary step: To identify the various
component parts, and to check for any missing parts.
2. Cut cable jackets and sheathing squarely and to correct
length, using only wire strippers that have been approved for
the operation. In preparing the individual wires in cables and
harnesses for assembly, make allowances in length for reaching
the outermost circle of contact cavities in the conductors. The
insulation should be cut progressively longer as they extend
out from the center of the cable or harness to assure sufcient
length.
3. Follow chart on page 34 covering maximum cable stripping
lengths for effective cable gland or grommet sealing. All
conductors should be t into contact wire wells correctly. A
practice layout should be done so that the assembler can
oversee what the nished will look like when nished.
4. Some cables that will be used will have a ‘basket weave’ type
of armor under the outer jacket (sheath) and over the inner
jacket. Since many regulatory entities require that the armor
be grounded at least at the source end, it is benecial to ground
the armor via a spare contact within the connector. Following
the removal of sufcient amount of outer jacket (see chart on
page 34) ample amount of the armor can be clipped away, but
not all. An adequate amount should remain in order that a
small cross-section conductor, short in length, be woven into
the remaining armor weave and either soldered or covered
with mastic impregnated heat shrink, creating an intimate bond
to the armor. At the opposite end of the short piece of wire a
contact should be crimped and inserted into the insert.
5. Use only correctly sized and ingress protected certied glands
or sealing grommets to assure resistance to moisture and other
contaminants.
6. Use only the proper crimping tools that have been set or
calibrated with precision gages.
7. Make certain that all contacts are the correct size before
attempting to assemble in insert cavities. This point is
particularly important when both power and control types of
contacts are used in the same connector.
8. Be sure that ground contacts (when applicable) are correctly
located.
9. Seat all contacts properly so that they will not be damaged or
become disengaged during connector mating operations
10. Use only the proper insertion tools and be sure that they are
aligned axially when pushing contact into their fully seated
position.
11. When inserts have more cavities than conductors, plug unused
cavities with furnished contacts.
12. After all terminated contacts are inserted in their respective
cavities and inspected (detailed on page 34), the cable adapter
or insert clamp nut should be tightened with a wrench. (detailed
on page 37).
13. When handling cables, use adequate support to prevent damage
to the internal wires. Exd glands are intended for sealing purposes
and should not be used as a cable grip.
14. If for any reason terminated conductors have to be removed from
an insert because of an assembly error or change in circuitry,
be sure to remove the cable gland or cable adapter rst before
extracting the contact and reinserting it.
15. If one of the connector poles is a ground wire, make sure that it
is grounded properly before the connector actually is engaged.
16. When connectors having the same configuration are to
be mounted close together, different or alternate keying
arrangements should be used to prevent mismatching and
possible damage to the electrical system.
17. Always inspect all aspects of connector assembly operations
before putting connectors into actual operation.
18. Crimping and terminating of conductors to contacts must be
done carefully. Make certain that wire strands are fully bottomed
in contact-wells by checking through inspection hole provided
(Detailed on page 34).
19. Never try to straighten bent contacts. Straightening cannot be
done properly and the plating on contacts very likely will be
marred. This will result in a high resistance connection and will
expose the base material to possible corrosion.
20. Each assembly operator should be his own inspector. Worn,
damaged, or defective tools should be reported immediately
to foreman and supervisors. Assembly operators should be
indoctrinated with this attitude and made to understand the
importance of always guarding quality. Assembly workmanship
is a signicant factor in terminating the quality of multiple contact
connectors. Quality cannot be “inspected” into connectors; it
must be “built-in” during each and every assembly operation.
Star-Line EX®
Familiarization & Assembly Information
Amphenol
INDUSTRIAL
STAR-LINE EX®
33
Page 4
Star-Line EX®
Cable Types
It is the responsibility of the specifier/user to select the appro-
priate cable to be used with the EX Star-Line connector sys-
tem. The specifier/user should favor the use of cables con-
structed with flexible conductors (IEC class 5 or higher/ICEA
type H or higher) as well as a flexible armor type (basket
weave) if required. Armor systems such as those identified in
IEC 92-3 or IEEE455 or UL1309 are recommended. An imper-
vious jacket should always be furnished over the armor. IEC/
BS cables such as armored with SWA (X), tape(Z), and NEC
style cables such as ‘interlocked’ or MC are not recommended
with the EX connector system.
The armor system should be grounded at the source point.
Periodically the specifier/user should investigate the need for
armor grounding (earthing) within the plug or in-line connec-
tor itself. In addition to the weaving of the armor grounding
conductor, soldering and/or heat shrink and/or strong adhe-
sive electrical takes, and/or ‘tension banding’ should be ap-
plied on the armor and conductor to insure a permanent bond.
The armor grounding wire should be terminated (solder or
crimp) to an appropriate sized contact, and inserted into the
connector insert.
The armor system should not be confused or associated with
shielding which is employed with instrumentation/
telecommunication cables. Shielding for pairs/triads have their
own individual drain wires which should be terminated onto
dedicated contacts. These drain wires should be insulated
with heat shrink within the connector body to prevent contact
with other drain wires or pair/triad shield faces.
The above procedure does not apply to single conductor ca-
bles, i.e., 444-1111mcm (150mm-500mm), or multiconductor
power or control cables.
Single conductor Cables Periodically single conductor cables
will be required in an armored and sheathed construction.
Since there is no armor grounding contact path provided
within the connector assembly, a suitable external method
must be employed. It is recommended that a small strip of
outer jacket be cut away a reasonable distance from the en-
trance to the cable gland of the connector. A durable insu-
lated conductor with a cross section not smaller than
#14awg/4mm should be bonded to the exposed armor. Pro-
tective tapes or heat or cold shrink (3M PST) should be applied
to protect this bonding point. The opposite end of this
grounding conductor should be terminated at the correspond-
ing receptacles’ panel via one of the receptacles’ fastening
screws or a dedicated grounding lug or bar. In an ‘in-line’
configuration, a mirror image of the above should be used
with a simple mating point in close proximity to the connector
set.
In summary the specifier/user should be versed in acceptable
applications that are allowed by the regulatory/certifying bod-
ies having jurisdiction. Periodic inspection of this grounding
arrangement should be implemented.
All connectors are furnished with a protective cover. In actual-
ity this cover is viewed as a critical part of the connector. The
cover is compared to a cover on a flameproof (Eexd) enclo-
sure. Absence of the cover voids the Ex certification. The
covers should not be viewed as an incidental protection to the
external elements, but a required component of a hazardous
certified device. When the connectors are plugged together
the covers can be screwed into each other to protect the
threads from damage. When the connectors are not mated, it
is required that the covers be installed and the set screws on
the covers be fully driven into the body of the connector.
Replacement covers and ‘NYLOK’ set screws are available on
request.
SIRA Product Labeling Information
Information below must be attached to connectors via non-removable label.
Amphenol
Sidney NY 13838 USA
Star-Line, Size Ref
Work Order Number; Date Code; Facility
Code
0518 II 2 GD
IP68-8
Marking for all connectors used in standard
(+40°C max.) ambient:
Ex d IIC T6 Gb (Inline Plugs and Receptacles)
Ex tb IIIC T80°C Db IP68 (Inline Plugs and Receptacles)
Ex de IIC T6 Gb (Panel mount receptacle filled w/ cement)
Ex tb IIIC T80°C Db IP68 (Panel mount receptacle filled w/ cement)
-20ºC Tamb +40°C
Marking for inline connectors, used in +55°C max. ambient:
(INCREASED TEMP RANGE ONLY ALLOWABLE FOR CONNECTORS
(EX-13-3, EX-15-3, EX-17-3) EMPLOYING SUITABLE EX CERTI-
FIED GLANDS. THIS MARKING IS NOT APPLICABLE FOR CE-
MENTED CONFIGURATIONS)
Ex d IIC T5 Gb (Inline Plugs and Receptacles)
Ex tb IIIC T95°C Db IP68 (Inline Plugs and Receptacles)
-20ºC Tamb +55°C
Sira 03ATEX1101X & IECEx SIR 10.0064X
“Max volts, Max amp, Current rating per pin”
DO NOT SEPARATE WHEN ENERGIZED
34
STAR-LINE EX®
The following instructions apply to equipment covered by certificate numbers:
Sira 03ATEX1101X & IECEx SIR 10.0064X
The equipment may be used with flammable gases and vapours with apparatus group(s) IIA, IIB, & IIC and with tempe-
rature classes T6, T5, T4, T3, T2 & T1.
The equipment is only certified for use in ambient temperatures in the range -20°C to +40oC and should not be used
outside this range.
The product complies with the following standards:
Installation shall be carried out by suitably-trained personnel in accordance with the applicable code of practice e.g.
EN/IEC 60079-14 or EN/IEC 61241-14. It is the end user’s responsibility to ensure that the product, as specified
and confirmed by the product label, is suitable for it intended application.
Inspection and maintenance of this equipment shall be carried out by suitably trained personnel in accordance with the
applicable code of practice e.g. EN/IEC 60079-17 or EN/IEC 61241-17.
Repair of this equipment shall be carried out by suitably trained personnel in accordance with the applicable code of
practice e.g. EN/IEC 60079-19.
Components to be incorporated into or used as replacement parts of the equipment shall be fitted by suitably trained
personnel, using only components purchased from Amphenol or an Amphenol approved distributor. Any use of non-
approved components/suppliers will invalidate the certification for that product.
The certification of this equipment relies upon the following materials used in its construction:
1. Connector Materials:
x (Standard Base Material) ASTM B211 or B221 Alloy 6061-T6, Aluminum (<7%Mg, <7%Ti),
x (Optional Base Material) ASTM 5640, Alloy 303, Stainless Steel,
x (Optional Base Material) ASTM B455, Alloy C38500, Brass.
2. Seal Materials:
x Buna Rubber w/ Durometer of 70 SHORE A.
If the equipment is likely to come into contact with aggressive substances, then it is the responsibility of the user to take
suitable precautions that prevent it from being adversely affected, thus ensuring that the type of protection provided by
the equipment is not compromised.
Aggressive substances: e.g. acidic liquids or gases that may attack metals, or solvents that may affect polymeric materi-
als.
Suitable precautions: e.g. regular checks as part of routine inspections or establishing from the material’s data sheets
that it is resistant to specific chemicals.
EN 60079-0:2006
(IEC 60079-0:2007 5th Ed)
General requirements for electrical apparatus for explo-
sive gas atmospheres
EN 60079-1:2007
(IEC 60079-1:2007 6th Ed)
Electrical apparatus for explosive gas atmospheres -
Part 1: Flameproof enclosures "d
EN 60079-7:2007
(IEC 60079-7:2006 4th Ed)
Electrical apparatus for explosive gas atmospheres –
Part 7: Increased safety "e"
EN 61241-0:2006
(IEC 61241-1:2004 1st Ed + Corr Nov 05)
General requirements for electrical apparatus for use in
the presence of combustible dust
EN 61241-1:2004
(IEC 61241-1:2004 1st Ed)
Electrical apparatus for use in the presence of combusti-
ble dust. Protection by enclosures “tD”
Amphenol
INDUSTRIAL
STAR-LINE EX®
35
SPECIAL CONDITIONS FOR SAFE USE/CONDITIONS OF CERTIFICATION
The following must be adhered to in full for safety and as to not invalidate product certication.
1. The panel mounted variants may be installed in suitably certied and dimensioned ameproof equipment providing that
the certication of this ameproof equipment will allow such installation.
2. The panel mounted variants may be tted in an increased safety enclosure when the free internal space is lled
with epoxy resin and providing the certication of the enclosure will allow such installation. An electric strength test in
accordance with EN 60079-7:2007 and IEC 60079-7:2007 Clause 7.1 will be performed on each unit after instal-lation of the
epoxy resin.
3. The Ex-18 range of panel-mounted variants may be installed in a suitably certied and dimensioned ameproof
equipment providing that the certication of this ameproof equipment will allow such installation. They have the following
dimensioned spigot joints and are suitable for Group IIA, IIB or IIC, dependent upon the associated
appa-ratus entry dimensions.
1. The Ex-18 range of receptacles shall only be used where the temperature at the point of entry in service on the
associated enclosure is between -20°C to +70.2°C.
2. The Ex-18 range connector does not incorporate an external earth facility. It is the responsibility of the user or installer to
ensure adequate earth continuity by means of guidance given within the manufac-turer’s installation instructions.
Shell Size Spigot diameter (mm) Spigot length (mm)
12 39.90/39.85 46 (+/-1)
16 49.90/49.85 46 (+/-1)
20 62.90/62.85 46 (+/-1)
24 74.90/74.85 46 (+/-1)
28 89.90/89.85 46 (+/-1)
Star-Line EX®
Connector Mating, Securement and Certication Compliance
The Starline EX series utilizes a traditional threaded (ACME) coupling scheme, with an additional enhancement. The coupling
sleeve is part of an actual assembly. The assembly is comprised of a coupling sleeve, and two (2) grub screws (set screws). These
set screws and their proper implementation, are a requirement of the Certicate of Conformity.
Once the connectors are mated, and the coupling nut has been tightened, it is a requirement that the Grub Screws both be
tightened using a proper tool (allen key; supplied with connector). This prevents the coupling nut from backing off, and minimizes
“unauthorized decoupling” of the mated connector pair. The Grub Screws would have to be intentionally loosened, in order for the
coupling nut to be retracted, and the connectors unmated.
WARNING: Compliance with the Certicate of Conformity is satised when:
1) the male and female connectors are completely mated, and
2) the coupling sleeve is fully engaged, and
3) the grub screws are fully engaged, and
4) all the above are established before the circuit is energized.
WARNING: When circuits are de-energized, and the connectors, all plugs and receptacles, are un- mated, the
respective ameproof blanking caps must be installed, and all grub screws secured. Flame- proof blanking caps
are a part of the certication, and their use is required, to maintain ameproof wor- thiness of the connector
halves independently, should the circuit be re-energized.
36
STAR-LINE EX®
Star-Line EX®
Assembly & Terminating Instructions
Cable Jacket & Wire Stripping
Shell Contact Mod 1 (Solder Contact) Mod 1 (Pressure Contact) Mod 2 & 3 (Crimp Contact)
Size Size Strip Lengths (mm) Strip Lengths (mm) Strip Lengths (mm)
AWG(mm) Conductor Jacket Conductor Jacket Conductor Jacket
12 18 (0.75mm) 7.2mm 99.2mm - 90.5mm 11.5mm 90.5mm
16 (1.5mm) 7.2mm 99.2mm - 90.5mm 14.6mm 90.5mm
12 (4.0mm) 8.7mm 99.2mm 17.5mm 90.5mm 15.5mm 90.5mm
10 (6.0mm) 11.9mm 99.2mm 14.3mm 84.1mm 17.1mm 92.1mm
16 18 (0.75mm) 7.2mm 105.5mm - 96.8mm 11.5mm 96.8mm
16 (1.5mm) 7.2mm 105.5mm - 96.8mm 14.6mm 96.8mm
12 (4.0mm) 8.7mm 105.5mm - 96.8mm 15.5mm 96.8mm
10 (6.0mm) 11.9mm 105.5mm - 90.5mm 17.1mm 98.4mm
8 (10.0mm) 15.1mm 105.5mm - 88.9mm 21.0mm 98.4mm
4 (25.0mm) 16.7mm 105.5mm 17.5mm 87.3mm 23.0mm 101.6mm
20 18 (0.75mm) 7.2mm 118.2mm - 109.5mm 11.5mm 109.6mm
16 (1.5mm) 7.2mm 118.2mm - 109.5mm 14.6mm 109.6mm
12 (4.0mm) 8.7mm 118.2mm - 109.5mm 15.5mm 109.6mm
10 (6.0mm) 11.9mm 118.2mm - 103.2mm 17.1mm 111.12mm
8 (10.0mm) 15.1mm 118.2mm - 101.6mm 21.0mm 111.12mm
4 (25.0mm) 16.7mm 118.2mm 17.5mm 101.6mm 23.0mm 113.9mm
1/0 (50.0mm) 18.3mm 118.2mm 19.1mm 98.4mm 31.0mm 115.2mm
535MCM
(240mm) 50.0mm 118.2mm - 90.0mm - -
24/C24 18 (0.75mm) 7.2mm 130.9mm - 122.2mm 11.5mm -
16 (1.5mm) 7.2mm 130.9mm - 122.2mm 14.6mm -
12 (4.0mm) 8.7mm 130.9mm - 122.2mm 15.5mm -
10 (6.0mm) 11.9mm 130.9mm - 115.9mm 17.1mm -
8 (10.0mm) 15.1mm 130.9mm - 114.3mm 21.0mm -
4 (25.0mm) 16.7mm 130.9mm 17.5mm 100.0mm 23.0mm -
1/0 (50mm) 18.3mm 130.9mm 19.1mm 117.5mm 31.0mm -
4/0 (120mm) 18.3mm 130.9mm 19.1mm 127.0mm 31.6mm -
535 MCM
(240mm) 50.0mm 130.9mm - 90.0mm - -
777 MCM
(400mm) 50.0mm 130.9mm - 90.0mm - -
28/C28 18 (0.75mm) 7.2mm 137.3mm - 125.6mm 11.5mm -
16 (1.5mm) 7.2mm 137.3mm - 125.6mm 14.6mm -
12 (4.0mm) 8.7mm 137.3mm - 125.6mm 15.5mm -
10 (6.0mm) 11.9mm 137.3mm - 122.2mm 17.1mm -
8 (10.0mm) 15.1mm 137.3mm - 120.7mm 21.0mm -
4 (25.0mm) 16.7mm 137.3mm 17.5mm 106.4mm 23.0mm -
1/0 (50mm) 18.3mm 137.3mm 19.1mm 123.8mm 31.0mm -
4/0 (120mm) 18.3mm 137.3mm 19.1mm 133.4mm 31.6mm -
350 MCM
(185mm) 21.4mm 137.3mm - 130.1mm 33.5mm -
Amphenol
INDUSTRIAL
STAR-LINE EX®
37
The following table gives the wire sizes and cord/cable
types to be used with the Star-line plugs, receptacles and
cable connectors. The plugs and cable connectors are
intended for connection to 3, 4 or 5 conductor cords/
cables depending on the contact insert conguration.
The cord sealing grips range for plugs and cord
connectors is 1/8”. For instance, if inside dia. of grommet
is 3/4” it will seal and grip a cord dia. in the range of .750
dia. max. to .625 dia min. Inside diameter of grommets
are in sixteenth of an inch increments.
There are two types of contacts used in Mod I style inserts, one is solder, the other is pressure. The pressure contacts
apply termination force via a set screw, and require being torque to values provided in the table below:
Amperes Rating Conductor Type
of Device Size AWG Cord/Cable
20 #14 S, SO
30 #12, #10 S, SO
60 #6, #4 W
100 #0, #1, #2 W
200 #3/0, #4/0 W
20 amp. 30 amp. 40 amp. 60 amp. 100 amp. 200 amp.
#12 contact #10 contact #8 contact #4 contact #1/0 contact #4/0 contact
Lb-in N/A 15 25 20 50 100
N-M N/A 1.7 2.8 2.3 5.7 11.3
NOTE 1. Photo “YY” is an example of EX-13-3 Series Plug using Exd gland.
Star-Line EX®
Assembly & Terminating Instructions
Electrical Connectors with MOD I Inserts
A. Prepare end of cable by stripping jacket and insulation per tables
shown on previous page. Remove any ridges or grooves by scarng the
edges to provide a smooth surface on the cable to insure good grommet
sealing. Tin conductors to be soldered to within 1/16” of insulation. Use
only resin ux for all soldering.
B. Slide the EX gland nut, cable grip, or anti-friction washer, grommet
and cable adapter, over the cable in the order named. Be sure the right
size EX gland or grommet has been selected to obtain a proper seal.
See photo “YY”.
C. Solder conductors in contacts, if solder type. TO ENSURE
ENVIRONMENTAL SEALING, ALL CONTACTS MUST REMAIN IN PLACE
EVEN IF EVERY ONE IS NOT BEING USED. The silicone insulation is heat
resistant, but reasonable care must be exercised to prevent unnecessary
heating. It is recommended that a DC induction soldering unit be used if
possible. Do not use open ame soldering. It is recommended that heat
shrink be applied over nished termination point.
D. Support the barrel assembly in a vise having smooth-faced jaws;
with female receptacle have ange secured in vice for holding steady.
The plug and receptacle keyways/keys are designed to withstand the
assembly torque. See photo “MM”.
E. Apply cable adaptor or insulation clamp nut by strap wrench, turning
counterclockwise (left hand thread) until hand-tight. APPLY STRAP
WRENCH TO CABLE ADAPTER OR INSULATION CLAMP AND TIGHTEN UNTIL IT SHOULDERS FULLY ON
BARREL. Substantial resistance should be felt by assembler as he rotates adapter on nal revolution. See
photo “PP”.
F. Slide Ex gland or grommet into cable adapter and engage either cable grip, or gland washer and gland nut.
DRAW UP TIGHT WITH WRENCH. If mechanical clamp nut is used, tighten clamp screws as nal step.
MM PP
YY
38
STAR-LINE EX®
Individual contacts are crimped to their respective conductors outside of the connector where
ample working space is available. The crimping operation can be done by hand or power
operated tools. Reference page 86 of this catalog for proper tool information.
Terminated contacts are individually inserted into the insulation with a contact insertion tool.
See photo “JJ”. Contacts may be inserted and removed without degrading contact retention
or environmental capability. The front rigid portion of the insert functions to stabilize and
ensure positive alignment of the contacts.
Contact cavities are clearly numbered on the front and rear insert face to facilitate
identication during assembly, inspection, and maintenance.
All contact cavities, whether used or not, must be populated in order to maintain certication
and proper environmental sealing.
For Electrical Connectors with MOD III Inserts
Mod III connectors contain insulations that are factory installed and locked into position with a non-removable retaining
ring. Each insulator assembly contains a resilient seal interposed between two rigid plastic insulators. Mod III contacts
are rear insert-able and rear release-able for quick and easy circuit changes. Mod III contacts are retained in their
respective cavities by means of collapsible metal collets. The main advantage of collet style retention are lower insertion
forces, eliminating need for insertion tools, and higher retention forces. Contact cavities are clearly numbered on the
front and rear insert face to facilitate identication during assembly, inspection, and maintenance. All contact cavities,
whether used or not, must be populated in order to maintain certication and proper environmental sealing.
All connectors are shipped with the inserts factory installed in the barrel shell, and in the specied key position.
CRIMPING CONTACTS: Contacts are crimped outside of the connector with a proper tool. Check through the inspection
hole in contact to make certain wires are fully bottomed in well before crimping.
1.The panel receptacle is comprised of two basic pieces. The rst is the actual
panel receptacle assembly, where the mating plug enters, and the second is the
panel adapter/potting chamber.
2. Following the termination and/or insertion of the contacts into their
representative cavities, the panel adapter is the rmly tightened all the way until
travel ceases.
3. The potting step can then be completed. After the potting compound has
hardened, the completed receptacle assembly can be installed into the
enclosure.
4. The square panel gasket is furnished for installation on the outer surface of the
enclosure behind the square ange. The sealing washer and brass locknut
should be fully tightened with proper tools. Following this step four proper
length 10mm screws should be installed into holes in corner of front ange.
(Brass locknut is not required when threading receptacle assembly into a
ameproof enclosure.
5. For all increased safety panel mount receptacles:
In accordance with EN50019:2000, Clause 7.1, the increased safety enclosure
certicate must include the use of the device as well as an electric strength test
on the nished assembly.
6.
The panel mount variant shall be installed in a suitably certied and dimensioned
ameproof equipment when it’s certicate allows such installation.
Star-Line EX®
Assembly & Terminating Instructions
Electrical Connectors with MOD II Inserts
JJ
Panel Gasket
Brass Locknut
Sealing Washer
Panel Mounting a Receptacle
Amphenol
INDUSTRIAL
STAR-LINE EX®
39
All cable adapters, other than ones suited for mating with an EX-certied gland, must be lled with encapsulant (potted).
The material certied for use in lling this connector line is to be supplied by Amphenol Industrial part number
10- 838535. The user or installer shall consider the performance of these materials with regard to attack by aggressive
substances that may be present in the hazardous area. This material is a two-component casting system with a 1:1
volumetric mix ratio. It has low exothermic qualities, peaking at only 102°F during cure. The material starts to harden in
under 2 hours and fully cures at room temperature in 24. It can be quick cured in 2 hours at 140°F.
The product is available in easy “mix & dispense” cartridges. More informa tion is available by contacting:
Amphenol Industrial Operations, Technical Support
Phone: (520) 285-5130
Filling Depths
The Cable Adapter should be lled with the encapsu-
lant to the following levels:
Cable Adapter
In-line cable adapters are lled to within one & three
quarter inches (1¾”) of the end of the adapter. The
goal is to have all the volume lled without interrupting
the cable grommet from seating when the strain relief
nut is installed.
Panel Adapter (shown above)
Bulkhead adapters should be lled to within
1/16” of the top.
Mixing Instructions
1. CAUTION: Wear goggles or other eye protection during all
operations.
2. Remove the tape band from the mid-section of the cartridge.
3. Squeeze cartridge slightly in area of the removed tape band
to deform foil barrier.
4. Push the threaded end of the mixing rod into small and fully
threaded into it’s mating thread within the tube.
5. Push the mixing rod to the bottom of cartridge and begin
plunging the mixing rod, the full length of the cartridge, while
rotating the mixing rod approximately 90° with each stroke.
Mix for the total number of 50 strokes. A stroke is one
complete in and out cycle. On the last stroke, mixing rod
should be fully extended outward.
6. Grasp the cartridge rmly at the neck of the tube, and
unscrew the mixing rod by turning counterclock-wise
approximately 3 turns. Remove mixing rod.
7. Install nozzle and remove bottom cap.
8. Load tube into a standard painters caulk gun.
9. Pot connectors in mated condition to assure contact
alignment.
10. Potting not required when using Exd/Exe gland option for
plugs and in-line receptacles.
Filled With Compound
1-3/4" Empty
Star-Line EX®
Potting Instructions
The following chart illustrates how much potting compound is needed per connector. This is based on ll lengths of
3-7/8” (in-line adapters) and 1-3/4” (Panel mount adapters) and the smallest allowable cable diameter included for each
particular shell.
Shell Size Approx. Cement usage Approx. Cement
in a 6” cable adapter* usage in a bulkhead
adapter*
(Fluid Ounces) (Fluid Ounces)
12 1.6 .5
16 3.5 1.1
20 6.1 2.1
24 9.0 3.3
28 11.1 4.5
* Note: These volumes are estimated. Necessary volumes may vary depending on conductor count, insulation, and jacket thickness.
Recommendations
It is recommended where possible, that when mated sets of connectors are potted that the connector with the female insert
be potted rst, allowed to set and then the male be potted while it is mated to the previously potted female connector. This
will ensure that the male contacts will be seated or ‘aimed’ properly at the female socket contact opposite it. The male
contacts have a given amount of movement while not engaged, and if during initial potting procedures the male contacts are
positioned beyond this movement range, they will not properly make contact with the socket contact.
Cartridge
Foil Barrier
Plunger
Bottom Cap
Base Compound
Tape Band
Catalyst
Mixing Rod
Star-Line EX®
Potting Instructions
Volume Chart
40
STAR-LINE EX®
41
STAR-LINE®
Plug w/ Mech. Clamp Dead Front Pin (Line side) RIG-10P-XX-M- RIG-R10P-XX-M-
Plug w/ Mech. Clamp Socket Contact (Load Side) RIG-10S-XX-M- RIG-R10S-XX-M-
Cable Receptacle w/ Mech. Clamp Dead Front Pin (Line side) RIG-15P-XX-M- RIG-R15P-XX-M-
Cable Receptacle w/ Mech. Clamp Socket Contact (Load Side) RIG-15S-XX-M- RIG-R15S-XX-M-
Fixed CableReceptacle w/ Mech. Clamp Dead Front Pin (Line side) RIG-17P-XX-M- RIG-R17P-XX-M-
Fixed Cable Receptacle w/ Mech. Clamp Socket Contact (Load Side) RIG-17S-XX-M- RIG-R17S-XX-M-
Panel Mount Receptacle (Bus Bar) Dead Front Pin (Line side) RIG-17PR- RIG-R17PR-
Panel Mount Receptacle (Bus Bar) Socket Contact (Load Side) RIG-17SR- RIG-R17SR-
Panel Mount Receptacle (Direct Cable Entry) Dead Front Pin (Line side) RIG-17PN- RIG-R17PN-
Panel Mount Receptacle (Direct Cable Entry) Socket Contact (Load Side) RIG-17SN- RIG-R17SN-
Rig-Power® Connectors
(1000v AC/DC)
RIG-Power Grommet
Selection Guide (XX)
* Select Cable Size. See Cable Size & Amperage Guide below.
XX - Select Cable Diameter Code #. See Grommet Selection Guide below.
M designates Mechanical Clamp (For basketweave grip substitute K for M).
Select standard color code from Color Code options below.
Use Crimp Tool: T&B #TBM15
Connector Standard RIG-Radsok®
Style Insert Gender Part Number* Part Number*
Standard Color Code Blue Orange Yellow Brown Red White Black Green
PartNumberSufx -BL -OR -Y -BR -R -W -BK -G
Current Type DC AC
NOTE: Radsok® version not backward
compatible with original contact design
1.000-1.125 18
1.125-1.250 20
1.250-1.375 22
1.375-1.500 24
1.500-1.625 26
1.625-1.750 28
1.750-1.875 30
Cable Diameter Code No. (XX)
Cable Size & Amperage
Selection Guide (p)
Color Code Options (t)
Single Pole Power
NOTE: It is the responsibility
of the user to ensure
other components of their
system have equal/greater
amperage carrying capacity.
Amphenol
INDUSTRIAL
2 = 313 kcmil 625 925 76
3 = 373 kcmil 700 1000 87
4 = 444 kcmil 800 1200 107
5 = 535 kcmil 900 1350 107
6 = 646 kcmil 1000 1500 107
7 = 777 kcmil 1135 1500 115
Standard RIG-Radsok® TBM 15
Cable Size Amperage Amperage Die Code No.
8.703
PLUG
RIG-10X -XX-M
PANEL MOUNT RECEPTACLE
RIG-17X
8.734
.297 DIA. 4 HOLES
2.531 SQ.
3.250 SQ.
NOTE:
See page 20, shell size
C24 for full mounting
dimensions.
RIG-R17SR-R
RIG-Power® Receptacle w/Radsok ®
Busbar Socket (Color Code Red)
RIG-R10P7-22-M-R
RIG-Power® Plug w/Radsok® Pin
(Color Code Red)
EX-13-3-D2-C24-R386PN
StarLine EX Plug w/Radsok® Pin
Mated Pair Starline EX Rig-Power w/Radsok®
EX-17-1-C24-R386SR
Starline EX Receptacle
w/Radsok® Socket
4242
Single Pole Power
PANEL BOARD SOCKET
TMPC-41777-L
DIA. MOUNTING HOLE
1.066 DIA. OVER KNURL
1.062
1.052
2.250
3.500
6.000
.547 MIN.PANEL THICKNESS
CLEVIS PIN
5.969
2.750 .547 MIN. PANEL THICKNESS
.750 2.250
1.066 DIA. OVER KNURL
MOUNTING HOLE DIA.
1.062
1.052
PANEL BOARD SOCKET
P-500126-BS
1.875
3.625
1.375 BOOT
1.250 D
.955 D
PIN
.750 D
2.656 D
6.813
PIN P-500126-P
1.875
3.625
1.375 BOOT
1.375 D
1.062 D
PIN
.750 D
2.656 D
6.813
PIN PD-501-L
Wire Type of Part Boot Part # Cable
Ampacity Size Termination Gender Number (See Color Code) Sealing Range
P-500TM / PD-501 POWER Connectors
900* Stud Socket P-500126-BS-
900* 535MCM Solder Pin PD-501-L TMPC-10- 1.125 - 1.500
900* 535MCM Crimp Pin P-500126-P TMPC-10- 1.125 - 1.500
325 313MCM Solder Pin PD-501-S TMPC-10- 1.125 - 1.500
1.875
3.625
1.375 BOOT
1.187 D
.875 D
PIN
.750 D
2.656 D
6.813
PIN PD-501-S
Note: Connectors are rated at 1000 Volts AC/DC when mounted on 5" centers.
Copper alloy, silver plated contacts for maximum conductivity.
Crimp tool required for P-500126-P is Thomas & Betts hex crimp using Tool # TBM15 &
die catalog #15505 or BURNDY “YA”
* When used with 125° C rated cable.
With Standard With Radsok
Contacts Contacts Cable
Type of Part Current Part Current Wire Boot Sealing
Gender Termination Number Range Number Range Size Part No. Range
Note: TMPC Connectors are rated at 1000 Volts AC/DC when mounted on 5" centers.
Material is copper alloy, silver plated for maximum conductivity and corrosion resistance.
Recommended crimping tools are as follows: Anderson (Square D) Versa Crimp VC8 (four indent).
TMPCTM Connectors
.656 DIA. 2 HOLES
6.000
1.750
MOTOR BUS BAR MOUNT
SOCKET TMPC-41777-24L
Single Pole Power Connectors
COLOR CODE DOT
4-1/16 REF.
1-1/8 DIA.
Socket 7/8" Stud/Panel Board TMPC-41777-L- 900-1135 amps TMPC-41777-RL- 1500 N/A N/A N/A
Socket 2 Hole Bus Bar TMPC-41777-24L 900-1135 amps TMPC-41777-R24L 1500 N/A N/A N/A
Pin Crimp TMPC-40535-L 900 amps TMPC-40535-RL 1500 444-535 kcmil TMPC-10- 1.125-1.500
Pin Crimp TMPC-40777-L 900-1135 amps TMPC-40777-RL 1500 646-777 kcmil TMPC-10- 1.125-1.500
TMPC-10-R
43
Single Pole Power Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
44
STAR-LINE®
Amphenol
INDUSTRIAL
TMPC POWER MOUNT
Amphenol® TMPC POWER MOUNT Flange
Mounted Traction Motor Power Connector
series featuring RADSOK® Contacts.
Amphenol Industrial Operations introduces the
addition of our “NEW” TMPC Power Mount flange
mounted connector series. The New TMPC Power
Mount series is an addition to our time tested TMPC
Single Pin power connector line. The TMPC Power
Mount incorporates our existing TMPC connectors
with RADSOK® contacts into our new thermoplastic
molded receptacle flange.
Available in color codes per the NEC AC/DC
Electrical requirements, the TMPC Power Mount
series is designed to work with current IEEE Type P
drilling cables (sizes range from 313 MCM through
777 MCM). The RADSOK® contacts allow for
higher amperages and reduced insertion/removal
forces when compared to similar products in the
market.
Features & Benefits:
• RADSOK contact provide increased
amperages than competition
• Contacts rated at 1500 amp for 777 MCM
cables
• Contacts machined from high grade
aluminum to offer longer life, more mating
cycles
• Lower insertion/removal forces is a by-
product of our RADSOK contacts
• Molded flange base mounts directly to
Stainless or Aluminum panels, thus
eliminating the need for added secondary
mounting fixtures
• Color coded mounting bases and cable side
boots available to help prevent cross mating,
while allowing easier electrical phase
identification
• Connector series comes complete with
molded Hypalon caps and insulation boots
• Patent Pending
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
45
STAR-LINE®
PLUG KIT PART NUMBER
COLOR 313 MCM 444 MCM 535 MCM 646 MCM 777 MCM
BLACK TMPC-SP3-BK TMPC-SP4-BK TMPC-SP5-BK TMPC-SP6-BK TMPC-SP7-BK
COLOR OPTIONS AVAILABLE:
Black, Blue, Brown, Green, Gray,
Orange, Purple, Red, White, Yellow
Plug Kit Consist of:
- Pin Contact
- Boot (color designation)
- Rubber Cover
RECEPTACLE KIT PART NUMBER
COLOR FLANGE KIT W/ CONTACT FLANGE KIT LESS CONTACT BOOT PART
Black TMPC-SR-BK TMPC-SRLC-BK TMPC-10-BK
COLOR OPTIONS AVAILABLE: Black, Blue,
Brown, Green, Gray, Orange, Purple, Red, White,
Yellow
Receptacle Kit Consist of:
-SocketContact(afxedintotheange)
- Flange (color designation)
- Rubber Cover
CABLE SIZE BUSBAR CONTACT
313-777
MCM TMPC-1
CABLE SIZE PIN CONTACT
313-535 MCM TMPC-40535-RL
646-777 MCM TMPC-40777-RL
CONTACTS ONLY
(FOR PIN RETENTION RING
ADD -RR)
DESCRIPTION PART NUMBER
RECEPTACLE CAP TMPC-SR-CAP
BOOT CAP TMPC-SP-CAP
MOUNTING GASKET TMPC-SR-G
BOOT RING 313 MCM SR1-313R
BOOT RING 444 MCM SR1-444R
BOOT RING 535 MCM SR1-535R
BOOT RING 646 MCM SR1-646R
BOOT RING 777 MCM SR1-777R
ACCESSORIES
Amphenol
INDUSTRIAL
46
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configuration
Listing
For Amphenol®/ Pyle® Star-Line, Star-Lok and Star-Line EX Connectors
Introduction
TheAmphenol/PyleStar-LineInsertCongurationListingisissuedprimarilytoidentifyvariouscontactinsert
arrangements.Fortheengineer,itprovidesvisualselectionoftheinsertcongurationneededtosatisfyhisrequirements.
For the end user, the list provides general information useful in the termination of plugs and receptacles. To aid the reader,
theinsertcongurationsarepresentedinnumericalorder,basedonthenumberofcontactsineach.
The male insert illustration shown left (and those on the
following pages) is shown as it appears when viewed
from the front. Contacts are shown by both physical
positionwithinthecongurationandbycontactnumber.
The contact number corresponds to the contact position
shown on the rear face of the insert illustrated as well
as to both the front and rear faces of the mating insert.
The symbol used to show contact location is indicative
of contact size. For example, the contact symbol in
this illustration represents a #8 contact. An explanation
of contact symbols is presented on each page of the
listing. Each drawing also provides data on normal and
alternate key positions. Drawings are reduced from
actualsizeoftheinsertconguration.
NOTE: Alternate keying or insert polarization is intended to
resist improper intermating of plugs and receptacles of like
shell sizes and like insert arrangements.
Contact Insert Ordering
Plug and receptacle contact inserts are selected according to requirements for Service Voltage Rating, Number of
Contacts, Wire Size and Ampere Rating.
Mod I and II inserts may be purchased separately for assembly into the basic barrel. The Catalog Number for each is
shown on the chart accompanying each drawing. Pin or socket inserts are interchangeable in male and female barrels.
Mod III inserts, as a unit, cannot be purchased separately because contact inserts are factory assembled to, and sealed
in,thebasicbarrel.TheDashNumbergivenwitheachModIllcongurationmustbeshownasasufxtothebasicbarrel
Catalog Number to identify the insert desired.
Arrangements are available with high amperage RADSOK®contactsspecicallydesignedforStar-Lineinserts.Theseare
designated with an ‘R’ in the part number. For example: ZP-C28-R42PR would designate an insert with size 4/0 RADSOK
pin contacts. ZP-C28-R42SR would designate an insert with size 4/0 socket contacts.
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
47
STAR-LINE®
Three Classifications of Ampere Ratings
MS Ampere Ratings: (MIL-C-39029)
Based on the combination of the following:
The amount of current which an individual pin and socket contact may carry is a function of contact material and design
efciencyofthepinandsocketsystemaswellastheabilityoftheprimaryconductorinsulationtoresisttemperaturerises
due to inherent copper losses and bundling factors.
Total current carrying capacity of the connector is a function of the insert temperature which is rated at 225° F (107° C) for
continuous operation. The total operating temperature is the summation of the ambient temperature plus the temperature
rise resulting from the thermal losses of each contact.
MIL-W-5088specicationsmaybeusedasageneralreferenceonthesubjectinasmuchaspertinentcablederatingdata
is included.
N.E.C. Non-Circuit-Breaking or Disconnect Ampere Ratings
The non-interrupting current ratings, shown in the table, are based on the temperature of the contacts being within the
rangespeciedbyUnderwriter’sLaboratories,Inc.whenwiresizesareselectedinaccordancewiththeNational
Electrical Code.
When multiple conductors are used, the load factor and temperature rise based on ambient and total insert temperature
must be taken into consideration..
Service Voltage Ratings
The voltage to which contact inserts are limited
is a function of the dielectric separation between
adjacentcontactsandbetweencontacts
and shell.
The voltage rating is designated by a service
voltage rating letter which is shown in the
service voltage rating table with each contact
congurationlisting.
ELECTRICAL
Ratings
NOTE: The N.E.C. circuit breaking and non-circuit breaking
ratings are based on test results of contacts and connectors.
ConsulttheN.E.C.whenselectingwire/cableforspecic
applications. Under certain conditions, a wire size may be
rated higher or lower than the table indicates for a given
contact size.
Measurements made at extreme ends of mated
contacts with probe touching contact and wire (MIL-5015
specications).
** Based on temperature rise (National Electrical Code
Requirement).
*** Based on Arcing Control (National Electrical Code
Requirement).
MIlitary N.E.C. Ratings
Ratings
MIL-5015 Non- Circuit Over
Specications Circuit Breaking Surface Thru-Air
Non-Circuit Distance Spacing
Breaking Inches Inches
Service D.C. A.C. D.C. A.C. Nominal Nominal
Voltage Volts Volts RMS RMS
RMS RMS
Instrument 250 200 1/16
A 700 500 250 240 1/8 1/16
D 1250 900 600 600 3/16 1/8
E 1750 1250 600 600 1/4 3/16
B 2450 1750 600 600 5/16 1/4
C 4200 3000 600 600 1 5/16
Non-Circuit
Breaking † MV Drop
Contact Ampere Rating
Size
AWG/ MS N.E.C. Solder Crimp
MCM *** Contacts Contacts
#18 9 22 30
#16 13 16 21 29
#12 23 30 20 27
#10 33 40 16 26
# 8 46 50 12 23
# 4 80 90 10 22
#1/0 150 155 10 22
#4/0 225 225 8 22
350 MCM 325 8
500 MCM 750 30
535 MCM 839
646 MCM 937
777 MCM 1048
For Amphenol Star-Line product insert de-rating
information per the National Electric Code,
please consult the Amphenol Industrial website,
www.amphenol-industrial.com. Chart is located
under LITERATURE tab.
Amphenol
INDUSTRIAL
48
STAR-LINE®
Amphenol
INDUSTRIAL
Spare/Replacement Contacts for
MOD II and MOD III Inserts
Contacts are machined copper alloy ranging in size (AWG) from #18 to 500 MCM.
Standard line contacts are silver plated but can also be furnished with gold over silver, gold over nickel, and other combinations
of plating systems available upon request.
Pin contacts are of blended geometry to provide extra strength and protection against damage. Socket contacts are the closed
entry type.
Contacts for MOD I inserts are not listed because these inserts are factory assembled and damage may be done to the resilient
centerinsulationifcontactsareinsertedorremovedbyinexperiencedpersonnelintheeld.
18 Pin ZP-4018-36L
18 Socket ZP-4118-36L
16 Pin ZP-4016-36L ZP-4016-37L
16 Socket ZP-4116-36L
12 Pin ZP-4012-36L ZP-4012-37L3
12 Socket ZP-4112-36L
10 Pin ZP-4010-36L ZP-4010-37L2
10 Socket ZP-4110-36L
8 Pin ZP-4008-66L
8 Socket ZP-4108-66L
4 Pin ZP-4004-66L ZP-4804-66L
4 Socket ZP-4104-66L ZP-4904-66L
1/0 Pin ZP-4000-66LB ZP-4800-66LKB
1/0 Socket ZP-4100-66L ZP-4900-66LK
4/0 Pin ZP-4041-76LB
4/0 Socket ZP-4141-76L
500 MCM Pin P-206053-CP
500 MCM Socket P-206053-CS
535 MCM Pin RIG-C24-535PN
535 MCM Socket RIG-C24-535SN
646-777 MCM Pin RIG-C24-386PN
646-777 MCM Socket RIG-C24-386SN
“W” length represents standard insert length for sizes 12, 16, 20 24 and 28. “C” length represents longer insert length for sizes C20, C24 and C28.
Contacts in “C” length inserts are 1/2” longer than standard. Ground contacts are 1/8” longer than standard. Ground clips are part of inserts. “C’
length ground contacts are 1/8” longer than “C” length line contacts.
MOD II
Size “W” “C” “W” Polarizing Polarizing
Awg/MCM Length Length Ground Standard “C”
For Amphenol Star-Line product insert de-rating information
per the National Electric Code, please consult the Amphenol
Industrial website, www.amphenol-industrial.com. Chart is
located under LITERATURE tab.
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
49
STAR-LINE®
Contact WIRE WELL DIMENSIONS
Size Solder Mod I Crimp* Mod II Crimp* Mod III
AWG (mm) Diameter Depth Diameter Depth Diameter Depth
#18 (0.75) .060” (1.52) 13/64” (5.15) .059” (1.49) 3/8” (9.52) .058” (1.47) 3/8” (9.52)
#16 (1.5) .079” (2.00) 13/64” (5.15) .079” (2.00) 1/2” (12.70) .079” (2.00) 1/2” (12.70)
#12 (4.0) .117” (2.97) 17/64” (6.47) .113” (2.87) 17/32” (6.74) .113” (2.87) 17/32” (13.49)
#10 (6.0) .142” (3.61) 25/64” (9.92) .142” (3.60) 19/32” (15.09) .142” (3.60) 19/32” (15.08)
#8 (10.0) .210” (5.33) 33/64” (9.12) .189” (4.80) 3/4” (19.05) .188” (4.77) 3/4” (19.05)
#4 (25.0) .333” (8.45) 37/64” (14.63) .289” (7.34) 53/64” (21.03) .278” (7.06) 53/64” (21.03)
1/0 (50.0) .470” (11.94) 41/64” (16.27) .445” (11.30) 1-1/8” (28.58) .455” (11.56) 15/16” (23.81)
4/0 (120.00) .656” (16.7) 57/64” (22.62) .656” (16.7) 15/16” (23.81)
350MCM (185.00) .798” (20.27) 1-1/8” (28.58)
500 MCM (240.00) 1.00” (25.40) 1-3/8” (34.93)
Termination Data
Amphenol – Pyle Connectors Corporation’s tools for contact crimping, insertion and removal are required for
terminating and assembling contacts.
Contact Dimensions
Torque Data for
Pressure Contacts
MOD I
Contact/Conductor Torque Req. Retention Force
Size/Awg (mm) In./Lbs. (N•m) Lbs. (N)
4/0 (120.00) 100 (11.3) 4/0 450 (2001.7)
3/0 350 (1556.9)
2/0 300 (1334.5)
1/0 (50.0) 50 (5.7) 1/0 250 (1112.0)
#1 200 (889.6)
#2 180 (800.7)
#4 (25.0) 20 (2.3) #4 140 (622.8)
#6 100 (444.8)
#8 90 (400.3)
#8 (10.0) 25 (2.8) #8 75 (333.6)
#10 (6.0) 15 (1.7) #10 80 (355.9)
#12 70 (311.4)
#14 60 (266.9)
* Crimp contacts have inspection hole.
Crimp Data
Conductor Crimp Retention
Contact Wire Size (AWG) Min. Force
Size Crimped Lbs. (N)
#18 38 (169.0)
#18 (0.75) #20 19 (84.5)
#22 15 (66.7)
#16 50 (222.4)
#16 (1.5) #18 38 (169.0)
#20 19 (84.5)
#12 110 (489.3)
#12 (4.0) #14 70 (311.4)
#16 50 (222.4)
#10 180** (800.7)
#10 (6.0) #12 110 (489.3)
#14 70 (311.4)
#8 225 (1000)
#8 (10.0) to
#10 180 (800)
#4 400 (1779)
#4 (25.0) to
#6 300 (1334)
#2 550 (2447)
1/0 (50.0) to
1/0 700 (3114)
4/0 875 (3892)
4/0 (120.00) 3/0 825 (3670)
2/0 750 (3336)
500(240.00) 500 MCM 2500 (11120)
535 Recommend using Thomas & Betts
646 TBM 15 crimp tool with appropriate
777 sized dies.
** Stranded wire
Amphenol
INDUSTRIAL
50
STAR-LINE®
Thermocouple Contacts
Thermocouplecontactsareavailableforuseinallinsertcongurations.Contactcanbeeitherpurchasedseparatelyorincluded
in the insert/connector-please coordinate with the factory on this latter option. For crimp terminations-see tools shown on page 76.
When soldering, please adhere to the following procedures: (1) clean wire and solder well with stainless scratch brush. (2) Use
HandyandHarmanSilverSolderFlux.(3)UseHandyandHarmanAMS2665SilverSolderwithametorch.IMPORTANT-Use
extremecaretopreventoverheatingthefemalecontact,otherwisetensionwillbelostandresultinpoorcontact.(4)Cleanux
from all surfaces using boiling water or steam.
Table Temperature Range
of Thermocouple Material
Temperature Range
Material* Degrees Short Time
Continuous
Electrolytic Copper 190-350°C to 600°C
& Constantan
Chromel & Constantan 0-900°C to 1100°C
Iron & Constantan 0-1100°C to 1100°C
Chromel & Alumel 0-1100°C to 1350°C
MOD I & II
Color Thermocouple
Size Gender Cat. No. Code Material*
Pin ZP-4016-10MF
#16 Black Iron
Socket ZP-4116-10MF
Pin ZP-4016-10NF
#16 Yellow Constantan
Socket ZP-4116-10NF
Pin ZP-4016-10PO
#16 White Chromel
Socket ZP-4116-10PO
Pin ZP-4016-10RO
#16 Green Alumel
Socket ZP-4116-10RO
Pin ZP-4016-10CF
#16 Red Copper
Socket ZP-4116-10CF
ISAColor MilitaryColor ConductorIdentication
ISA Coding Coding
Symbol Nomenclature* (+) (–) Jacket (+) (–) Positive (+) Negative (–)
J Iron/Constantan White Red Black Black Yellow Magnetic Non-Magnetic
K Chromel/Alumel Yellow Red Yellow White Green Non-Magnetic Magnetic
T Copper/Constantan Blue Red Blue Red Yellow Copper Color Non-Magnetic
E Chromel/Constantan Purple Red Purple White Yellow Non-Magnetic Silver Color Non-Magnetic
B Copper/Copper Black White Black Red Red Copper Color Non-Magnetic
S Alloy #11
* Chromel and Alumel are registered trademarks of Hoskins Manufacturing Company.
For Amphenol Star-Line product insert de-rating information per the National Electric Code, please consult the Amphenol
Industrial website, www.amphenol-industrial.com. Chart is located under LITERATURE tab.
Insert MOD MOD MOD Radsok Total 18 16 12 10 8 4 1/0 4/0 313MCM 350 MCM 373 MCM 444 MCM 535 MCM 646-777 Page
Arrangement I II III Contacts Number (0.75) (1.5) (4.0) (6.0) (10.0) (250) (50.0) (120.0) (185.0) (240.0) (300-400) No.
Number of Contacts
Insert Configuration Index
For drawings and further information of insert arrangements listed see the referenced page numbers. Arrangements with RADSOK
contacts are designated with an ‘R’ in front of the dash number in the part number. For availability of other arrangements, consult
Amphenol Industrial Operations.
RIG-C24-386 X 1 1 54
RIG-C24-R386 X X 1 1 54
RIG-C24-535 X 1 1 54
RIG-C24-R535 X X 1 1 54
RIG-C24-313 X 1 54
RIG-C24-R313 X X 1 54
RIG-C24-373 X 1 54
RIG-C24-R373 X X 1 54
RIG-C24-444 X 1 54
RIG-C24-R444 X X 1 54
ZP-12-310 X(G) X 7 7 64
ZP-12-14 X 4 4 56
ZP-12-314 X 4 4 56
ZP-12-316 X 4 4 56
ZP-12-22 X(G) 4 4 56
ZP-12-322 X(G) 4 4 56
ZP-12-323 X 17 17 70
ZP-12-24 X 5 5 59
ZP-12-324 X X 5 5 59
ZP-12-326 X 5 3 2 61
ZP-12-27 X 3 3 55
ZP-12-327 X X 3 3 55
ZP-12-330 X(G) X 3 3 55
ZP-12-33 X 4 4 56
ZP-12-333 X 4 4 56
ZP-12-334 X(G) 10 10 67
ZP-12-348 X 7 7 64
ZP-12-53 X(G) 5 5 59
ZP-12-653 X(G) 5 5 59
ZP-12-354 X X 7 7 65
ZP-12-355 X 10 10 67
ZP-12-56 X(G) 3 3 55
ZP-C-16-341 X 1 54
ZP-16-312 X(G) X 19 19 71
ZP-16-16 X 5 5 59
ZP-16-316 X 5 5 59
ZP-16-321 X 37 37 74
ZP-16-22 X 4 4 57
ZP-16-322 X 4 4 57
ZP-16-324 X 18 16 2 70
ZP-16-325 X 16 16 69
ZP-16-28 X 4 4 57
ZP-16-328 X 4 4 57
ZP-16-29 X 9 8 1 66
ZP-16-333 X 61 61 79
ZP-16-335 X 27 24 3 73
ZP-16-37 X 26 18 4 4 73
ZP-16-38 X(G) 4 4 57
ZP-16-638 X(G) 4 4 57
ZP-16-640 X 55 55 77
ZP-16-344 X 21 11 10 72
ZP-16-346 X 9 6 3 66
ZP-16-349 X 14 12 2 68
ZP-16-355 X 19 19 71
(G) depicts arrangement with grounded contact
1
1
1
1
1
1
Amphenol
INDUSTRIAL
51
STAR-LINE®
Amphenol
INDUSTRIAL
52
STAR-LINE®
Amphenol
INDUSTRIAL
Insert MOD MOD MOD Radsok Total 18 16 12 10 8 4 1/0 4/0 350 MCM 500MCM 646-777 Page
Arrangement I II III Contacts Number (0.75) (1.5) (4.0) (6.0) (10.0) (250) (50.0) (120.0) (185.0) (240.0) (300-400) No.
Number of Contacts
Insert Configuration Index
For drawings and further information of insert arrangements listed see the referenced page numbers. Arrangements with RADSOK
contacts are designated with an ‘R’ in front of the dash number in the part number. For availability of other arrangements, consult
Amphenol Industrial Operations.
(G) depicts arrangement with grounded contact
ZP-16-70 X 3 3 55
ZP-16-371 X 46 45 45 1 76
ZP-16-373 X(G) 27 24 3 73
ZP-16-74 X(G) 3 3 55
ZP-16-75 X(G) 5 5 59
ZP-16-376 X(G) 10 6 4 67
ZP-16-377 X X 19 19 70
ZP-16-378 X(G) 7 7 65
ZP-16-381 X 10 6 4 67
ZP-20-313 X 68 68 79
ZP-20-323 X 38 35 3 75
ZP-20-329 X 64 62 2 79
ZP-20-331 X 22 20 2 73
ZP-20-32 X 20 20 72
ZP-20-332 X X 20 20 72
ZP-20-334 X 20 16 4 72
ZP-20-35 X 60 60 78
ZP-20-38 X(G) 5 5 60
ZP-C20-40 X(G) 4 4 57
ZP-C20-640 X(G) 4 4 57
ZP-C20-42 X 4 4 58
ZP-20-43 X(G) 6 2 4 62 & 82
ZP-20-643 X(G) 6 2 4 62
ZP-20-344 X 81 70 11 80
ZP-20-345 X 90 90 80
ZP-20-46 X 6 4 2 62
ZP-20-646 X 6 4 2 62
ZP-20-48 X 6 3 3 62
ZP-20-648 X 6 3 3 62
ZP-20-49 X 5 3 2 61
ZP-20-649 X 5 3 2 61
ZP-20-350 X(G) X 37 37 75
ZP-20-354 X 47 45 2 76
ZP-20-55 X 10 8 2 68
ZP-20-358 X 16 16 70
ZP-20-359 X 7 7 65
ZP-20-673 X 50 46 4 77
ZP-20-374 X 27 25 2 74
ZP-20-375 X 12 12 68
ZP-20-376 X X 19 19 71
ZP-C20-379 X 1 1 54
ZP-20-84 X 5 5 60
ZP-20-384 X 5 5 60
ZP-20-386 X X 37 37 74
ZP-20-387 X(G) X 20 20 72
ZP-20-388 X(G) 19 19 71
ZP-24-313 X 100 100 81
ZP-C24-26 X(G) 4 4 58
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
53
STAR-LINE®
Insert MOD MOD MOD Radsok Total 18 16 12 10 8 4 1/0 4/0 350 MCM 500MCM 646-777 Page
Arrangement I II III Contacts Number (0.75) (1.5) (4.0) (6.0) (10.0) (250) (50.0) (120.0) (185.0) (240.0) (300-400) No.
Number of Contacts
Insert Configuration Index
For drawings and further information of insert arrangements listed see the referenced page numbers. Arrangements with RADSOK
contacts are designated with an ‘R’ in front of the dash number in the part number. For availability of other arrangements, consult
Amphenol Industrial Operations.
(G) depicts arrangement with grounded contact
ZP-24-331 X 60 53 7 78
ZP-C24-36 X 37 35 2 75
ZP-C24-38 X 4 4 58
ZP-24-40 X 15 10 5 69
ZP-C24-47 X 15 10 5 69
ZP-C24-48 X 5 2 3 61
ZP-C24-49 X(G) 5 5 60
ZP-24-352 X(G) X 58 58 78
ZP-C24-353 X 8 4 4 65
ZP-24-354 X 75 61 11 3 80
ZP-24-362 X 62 62 79
ZP-24-371 X 37 37 75
ZP-C24-72 X 6 3 3 63
ZP-C24-79 X 5 5 60
ZP-C24-680 X(G) 10 6 4 68
ZP-C24-81 X(G) 15 10 5 69
ZP-24-83 X 4 4 58
ZP-24-84 X 58 58 77
ZP-24-384 X X 58 58 77
ZP-24-385 X 100 100 81
ZP-24-388 X 72 72 80
ZP-24-389 X 60 60 78
ZP-28-314 X 100 83 17 81
ZP-C28-15 X 47 43 3 1 76
ZP-C28-18 X 6 2 4 63 & 82
ZP-C28-R18 X 6 2 4 82
ZP-C28-21 X 8 4 4 66
ZP-28-322 X 143 143 81
ZP-C28-23 X(G) 5 5 61
ZP-28-324 X 55 41 5 3 6 77
ZP-C28-327 X 6 6 63
ZP-C28-328 X 29 23 2 4 74
ZP-28-339 X X 42 42 76
ZP-C28-42 X(G) 6 2 4 64 & 83
ZP-C28-43 X(G) 8 4 4 66
ZP-C28-R44 X X 7 1 3 4 64 & 83
ZPC28-R44 83
Amphenol
INDUSTRIAL
54
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
1 Contact (Dead Front Male Contact/Line Side)
Wire
Style Terminal Shell Insert Dash Catalog Qty. Size Current
Type Size Type Number Number AWG (mm) Rating Voltage
Mod II Crimp C24 Pin 386PN RIG-C24-386PN 1 646-777 1135A 1000V
Socket 386SN RIG-C24-386SN (300-400)
Mod II Radsok C24 Pin R386PN RIG-C24-R386PN 1 646-777 1135A 1000V
Crimp Socket R386SN RIG-C24-R386SN (300-400)
front face of pin insert shown
N
777 MCM
Mod II Radsok C24 Pin R386PR RIG-C24-R386PR 1 646-777 1135A 1000V
Busbar Socket R386SR RIG-C24-R386SR (300-400)
Mod II Crimp C24 Pin 535PN RIG-C24-535PN 1 535 900A 1000V
Socket 535SN RIG-C24-535SN (240)
Mod II Radsok C24 Pin R535PN RIG-C24-R535PN 1 535 900A 1000V
Crimp Socket R535SN RIG-C24-R535SN (240)
Mod II Crimp C24 Pin R444PN RIG-C24-444PN 1 444 800A 1000V
Socket R444SN RIG-C24-444SN (185)
Mod II Radsock C24 Pin R444PN RIG-C24-R444PN 1 444 800A 1000V
Crimp Socket R444SN RIG-C24-R444SN (185)
Mod II Crimp C24 Pin R373PN RIG-C24-373PN 1 373 700A 1000V
Socket R373SN RIG-C24-373SN (150)
Mod II Radsock C24 Pin R373PN RIG-C24-R373PN 1 373 700A 1000V
Crimp Socket R373SN RIG-C24-R373SN (150)
Mod II Crimp C24 Pin R313PN RIG-C24-313PN 1 313 625A 1000V
Socket R313SN RIG-C24-313SN (120)
Mod II Radsock C24 Pin R313PN RIG-C24-R313PN 1 313 625A 1000V
Crimp Socket R313SN RIG-C24-R313SN (120)
N
535 MCM, 444 MCM
373 MCM, 313 MCM
1 Contact
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp C20 Pin 379PN ZP-C20-379PN 1 500MCM D
Socket 379SN ZP-C20-379SN
N
NOTE: Will accept 535 standard stranding 500 MCM extra exible cable.
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
1 Contact
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp C16 Pin 341PN ZP-C16-341PN 1 4/0 D
Socket 341SN ZP-C16-341SN
N
341 MCM
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
55
STAR-LINE®
3 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 12 Pin 27P ZP-12-27P 3 12 D
Socket 27S ZP-12-27S
Mod II Radsok 12 Pin 327PN ZP-12-327PN
Crimp Socket 327SN ZP-12-327SN
N
2
3
1
01
36
o
02
72
o
03
108
o
04
144
o
05
180
o
UL
®
Insert Configurations
3 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 330PN ZP-12-330PN 3 12 D
Radsok Socket 330SN ZP-12-330SN
front face of pin insert shown
3 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 12 Pin 56P ZP-12-56P 3 8 A
Socket 56S ZP-12-56S
Mod I Solder 16 Pin 74P ZP-16-74P 3 4 D
Socket 74S ZP-16-74S
Mod I Pressure 16 Pin 74PR ZP-16-74PR
Socket 74SR ZP-16-74SR
3 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 70P ZP-16-70P 3 4 D
Socket 70S ZP-16-70S
Mod I Pressure 16 Pin 70PR ZP-16-70PR
Socket 70SR ZP-16-70SR
N
1
2
3
04
220o
180o
140o
80o
01
02
03
01
02
01
N
2
3
1
01
36
o
02
72
o
03
108
o
04
144
o
05
180
o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
3 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Amphenol
INDUSTRIAL
56
STAR-LINE®
Amphenol
INDUSTRIAL
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 12 Pin 33P ZP-12-33P 4 16 D
Socket 33S ZP-12-33S
Mod II Crimp 12 Pin 333PN ZP-12-333PN
Socket 333SN ZP-12-333SN
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 12 Pin 14P ZP-12-14P 4 10 D
Socket 14S ZP-12-14S
Mod I Pressure 12 Pin 14PR ZP-12-14PR
Socket 14SR ZP-12-14SR
Mod II Crimp 12 Pin 314PN ZP-12-314PN
Socket 314SN ZP-12-314SN
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 12 Pin 22P ZP-12-22P 4 10 D
Socket 22S ZP-12-22S
Mod I Pressure 12 Pin 22PR ZP-12-22PR
Socket 22SR ZP-12-22SR
Mod II Crimp 12 Pin 322PN ZP-12-322PN
Socket 322SN ZP-12-322SN
Insert Configurations
front face of pin insert shown
UL
®
UL
®
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 316PN ZP-12-316PN 4 10 D
Socket 316SN ZP-12-316SN
UL
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
N
1
2
3
4
04
324
o
03
252
o
01
36
o
108
o
02
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
57
STAR-LINE®
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 22P ZP-16-22P 4 4 D
Socket 22S ZP-16-22S
Mod I Pressure 16 Pin 22PR ZP-16-22PR
Socket 22SR ZP-16-22SR
Mod II Crimp 16 Pin 322PN ZP-16-322PN
Socket 322SN ZP-16-322SN
Insert Configurations
front face of pin insert shown
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 38P ZP-16-38P 4 4 D
Socket 38S ZP-16-38S
Mod I Pressure 16 Pin 38PR ZP-16-38PR
Socket 38SR ZP-16-38SR
Mod III Crimp 16 Pin 638PN
Socket 638SN
UL
®
UL
®
N
1
2
3
4
01 105
o
02
135
o
04
03
240
o
255
o
N
12
3
4G 01 105o
120o
02
315o
330o
345o
05
04
03
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 28P ZP-16-28P 4 8 D
Socket 28S ZP-16-28S
Mod II Crimp 16 Pin 328PN ZP-16-328PN
Socket 328SN ZP-16-328SN
N
1
2
3
4
01
45o
02
NOTE: Cannot be
used with short
cable adapter
112o30'
UL
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
4 Contacts
Wire
Style Terminal Shell Insert Dash Catalog Qty. Size Current
Type Size Type Number Number AWG Rating
Mod I Solder C20 Pin 40P ZP-C20-40P 4 1/0 D
Socket 40S ZP-C20-40S
Mod I Pressure C20 Pin 40PR ZP-C20-40PR
Socket 40SR ZP-C20-40SR
Mod III Crimp C20 Pin 640PN
Socket 640SN
UL
®
N
1
2
3
4G
02
165o
01
15o
Amphenol
INDUSTRIAL
58
STAR-LINE®
Amphenol
INDUSTRIAL
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 24 Pin 83P ZP-24-83P 4 4/0 D
Socket 83S ZP-24-83S
N
1
2
3
01
45
o
4
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 26P ZP-C24-26P 4 4/0 D
Socket 26S ZP-C24-26S
Mod I Pressure C24 Pin 26PR ZP-C24-26PR
Socket 26SR ZP-C24-26SR
4 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 38P ZP-C24-38P 4 4/0 D
Socket 38S ZP-C24-38S
Mod II Pressure C24 Pin 38PR ZP-C24-38PR
Socket 38SR ZP-C24-38SR
N
1
2
03
02
225o
240o
3
4
01
15o
UL
®
UL
®
N
1
2
3
02
165
o
4G
01
15
o
Insert Configurations
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C20 Pin 42P ZP-C20-42P 4 1/0 D
Socket 42S ZP-C20-42S
Mod I Pressure C20 Pin 42PR ZP-C20-42PR
Socket 42SR ZP-C20-42SR
UL
®
4 Contacts
N
1
2
34
01
02
225o
15o
front face of pin insert shown
01 key
position not
available in
pressure
termination
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
59
STAR-LINE®
Insert Configurations
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 12 Pin 53P ZP-12-53P 5 12 D
Socket 53S ZP-12-53S
Mod III Crimp 12 Pin 653PN
Socket 653SN
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
ModI Solder 12 Pin 24P ZP-12-24P 5 12 D
Socket 24S ZP-12-24S
Mod II Radsok 12 Pin 324PN ZP-12-324PN
Crimp Socket 324SN ZP-12-324SN
N
1
2
3
4G
5
01 key
position not
available in
presssure
termination
N
1
2
3
4
5
01
48o
02 97o30'
UL
®
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 16P ZP-16-16P 5 8 D
Socket 16S ZP-16-16S
Mod II Crimp 16 Pin 316PN ZP-16-316PN
Socket 316SN ZP-16-316SN
front face of pin insert shown
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 75P ZP-16-75P 5 8 D
Socket 75S ZP-16-75S
UL
®
UL
®
N
1
2
3
4
5
01
36
o
N
1
2
3
4G
5
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
60
STAR-LINE®
Insert Configurations
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 84P ZP-20-84P 5 4 D
Socket 84S ZP-20-84S
Mod I Pressure 20 Pin 84PR ZP-20-84PR
Socket 84SR ZP-20-84SR
Mod II Crimp 20 Pin 384PN ZP-20-384PN
Socket 384SN ZP-20-384SN
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 38P ZP-20-38P 5 4 D
Socket 38S ZP-20-38S
Mod I Pressure 20 Pin 38PR ZP-20-38PR
Socket 38SR ZP-20-38SR
UL
®
UL
®
N
1
2
3
4
5
N
1
01
15
o
2
3
4G
5
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 79P ZP-C24-79P 5 1/0 E
Socket 79S ZP-C24-79S
Mod I Pressure C24 Pin 79PR ZP-C24-79PR
Socket 79SR ZP-C24-79SR
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 49P ZP-C24-49P 5 1/0 E
Socket 49S ZP-C24-49S
Mod I Pressure C24 Pin 49PR ZP-C24-49PR
Socket 49SR ZP-C24-49SR
N
1
2
3
4
5
01 108
o
N
1
01
36o
2
3
4G
5
front face of pin insert shown
UL
®
UL
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
61
STAR-LINE®
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 49P ZP-20-49P 2 1/0 E
Socket 49S ZP-20-49S 3 12 E
Mod III Crimp 20 Pin 649PN
Socket 649SN
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 48P ZP-C24-48P 3 4/0 D
Socket 48S ZP-C24-48S 2 12 A
N
A
B
C
D
E
01 80
o
02 110
o
03
250
o
04
280
o
N
1
2
3
4
5
01
45o
02
157o30'
03
292o
Insert Configurations
front face of pin insert shown
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 23P ZP-C28-23P 5 4/0 D
Socket 23S ZP-C28-23S
Mod I Pressure C28 Pin 23PR ZP-C28-23PR
Socket 23SR ZP-C28-23SR
5 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 326PN ZP-12-326PN 2 8 A
Socket 326SN ZP-12-326SN 3 16 A
UL
®
N
1
90o
01
02
126o
03
180o
2
3
4G
5
N
1
2
3
4
501
45o
02 90o
03
115o
04
180o
05
270o
®
5 Contacts
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
62
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
front face of pin insert shown
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Pressure 20 Pin 43PR ZP-20-43PR 4 4 D
Socket 43SR ZP-20-43SR 2 10 D
Mod III Crimp 20 Pin 643PN
Socket 643SN
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 46PR ZP-20-46P 2 1/0 A
Socket 46SR ZP-20-46S 4 4 A
Mod III Crimp 20 Pin 646PN
Socket 646SN
N
1
01
30
o
02
120
o
03
180º
04
05270
o
240
o
2
34G
5
6
N
A
B
C
D
E
F
01
02
244º
03270º
04
334º26º
®
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 48P ZP-20-48P 3 1/0 D
Socket 48S ZP-20-48S 3 12 D
Mod III Crimp 20 Pin 648PN
Socket 648SN
N
A
B
C
D
E
F01
70º
145º
02
03
215º
04
290º
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
63
STAR-LINE®
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 18P ZP-C28-18P 4 350 MCM D
Socket 18S ZP-C28-18S 2 12 E
N
1
2
3
4
5
6
01
60o
02
03
195o
120o
Insert Configurations
front face of pin insert shown
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 72P ZP-C24-72P 3 4/0 D
Socket 72S ZP-C24-72S 3 12 D
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp C28 Pin 327PN ZP-C28-327PN 6 1/0 D
Socket 327SN ZP-C28-327SN
N
1
2
3
4
5
6
01 70
o
02
04
290
o
215
o
03
145
o
N
1
2
3
4
5
6
01
30
o
02
60
o
03 90
o
04
120
o
05
230
o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
64
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
front face of pin insert shown
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 42P ZP-C28-42P 4 4/0 D
Socket 42S ZP-C28-42S 2 10 D
Mod I Pressure C28 Pin 42PR ZP-C28-42PR
Socket 42SR ZP-C28-42SR
Mod I Radsok C28 Pin R42PR ZP-C28-R42PR
Pressure Socket R42SR ZP-C28-R42SR
7 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 348PN ZP-12-348PN 7 16 A
Socket 348SN ZP-12-348SN
7 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 12 Pin 310PN ZP-12-310PN 7 12 A
Crimp Socket 310SN ZP-12-310SN
N
1
2
3
4G
56
01 90o
02
126o
03
180o
N
1
2
3
4
5
67
01
30
o
02
60º
03 90
o
04
120
o
05
150
o
06
180
o
07
210
o
08
240
o
09270
o
10
300
o
11
330
o
N
Ground terminal method
same as corresponding
line contacts
1
2
3
4
5
67
UL
®
®
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Radsok C28 Pin R44PR ZP-C28-R44PR 3 4/0 D
Pressure Socket R44SR ZP-C28-R44SR 3 8 D
1 10 D
7 Contacts
N
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
65
STAR-LINE®
Insert Configurations
front face of pin insert shown
Mod II Radsok 12 Pin 354PN ZP-12-354PN 7 12 A
Crimp Socket 354SN ZP-12-354SN
7 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 378PN ZP-16-378PN 7 12 D
Socket 378SN ZP-16-378SN
7 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 359PN ZP-20-359PN 7 8 E
Socket 359SN ZP-20-359SN
8 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp C24 Pin 353PN ZP-C24-353PN 4 1/0 B
Socket 353SN ZP-C24-353SN 4 12 A
7 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
®
N
1
23
4
56
7
N
1
2
3
4
5
6
7
01
228o
02
180o
03
140o
04
280o
N
1
2
3
4
5
6
7
01
36
o
02
72
o
03 108
o
04
144
o
05
180
o
06
216
o
07
252
o
08
288
o
09
324
o
N
1
2
3
4
5
6
7
801
30o
02
71o
03 108o
04
222o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
66
STAR-LINE®
8 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 21P ZP-C28-21P 4 350 MCM D
Socket 21S ZP-C28-21S 4 12 Relay E
Insert Configurations
front face of pin insert shown
8 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 43P ZP-C28-43P 4 350 MCM D
Socket 43S ZP-C28-43S 4 12 Relay E
9 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 16 Pin 29P ZP-16-29P 1 4 D
Socket 29S ZP-16-29S 8 16 D
9 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 346PN ZP-16-346PN 6 12 A
Socket 346SN ZP-16-346SN 3 8 A
N
1
2
3
4
5
6
7
8
01
60
o
N
1
2
3
4G
5
6
7
8
01 75o
N
12
3
4
5
6
7
8
9
01
60
o
02
120
o
03
180
o
04
240
o
05
300
o
N
1
2
3
4
5
6
7
8
9
01
30
o
02
60
o
03 90
o
04
120
o
05
230
o
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
67
STAR-LINE®
Insert Configurations
front face of pin insert shown
10 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 355PN ZP-12-355PN 10 16 A
Socket 355SN ZP-12-355SN
®
10 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 334PN ZP-12-334PN 10 16 A
Socket 334SN ZP-12-334SN
®
N
1
2
3
4
56
7
8
9
10 01 75o
N
1
2
3
4
5
6
7
8
9
10
02 70
o
03
145
o
10 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 381PN ZP-16-381PN 4 10 D
Socket 381SN ZP-16-381SN 6 12 D
®
N
1
2
3
4
5
6
7
8910
01
30
o
02
45
o
10 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 376PN ZP-16-376PN 4 10 D
Socket 376SN ZP-16-376SN 6 12 D
N
12
3
4G
5
6
7
8
9
10
01
35
o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
68
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
front face of pin insert shown
10 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 55P ZP-20-55P 2 1/0 D
Socket 55S ZP-20-55S 8 12 D
®
10 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod III Crimp C24 Pin 680PN 4 1/0 D
Socket 680SN 6 12 D
®
12 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 375PN ZP-20-375PN 12 10 D
Socket 375SN ZP-20-375SN
®
N
1
2
3
4
5
6
7
8
9
10
01
30
o
02
60
o
03
04
120
o
90
o
N
12
3
4G
5
6
7
8
9
10
01
35o
N
1
2
3
4
5
6
7
8
910
11
12
01
27o
02
67o
03
107o
04
133o
05
173o
06
214o
14 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 349PN ZP-16-349PN 2 4 D
Socket 349SN ZP-16-349SN 12 16 A
N
1
2
3
4
5
6
7
89
10
11
12
13
14
01
30
o
02
60
o
03 90
o
04
112
o
05
135
o
06
157
o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
69
STAR-LINE®
Insert Configurations
front face of pin insert shown
15 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 24 Pin 40P ZP-24-40P 5 1/0 D
Socket 40S ZP-24-40S 10 16 D
15 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 47P ZP-C24-47P 5 1/0 D
Socket 47S ZP-C24-47S 10 12 A
15 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 81P ZP-C24-81P 5 1/0 D
Socket 81S ZP-C24-81S 10 12 A
®
16 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 325PN ZP-16-325PN 16 16 D
Socket 325SN ZP-16-325SN
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
01
36o
02
126o
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
01
36
o
N
1
2
3
45
6
7
8
9
10
11
12 13
14
15
N
1
2
3
4
5
6
7
8
9
10
11 12
13
14
15
16
243o
03
02
180o
01 90o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
70
STAR-LINE®
Insert Configurations
front face of pin insert shown
16 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 358PN ZP-20-358PN 16 8 A
Socket 358SN ZP-20-358SN
®
17 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 12 Pin 323PN ZP-12-323PN 17 18 A
Socket 323SN ZP-12-323PN
®
18 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 324PN ZP-16-324PN 2 10 D
Socket 324SN ZP-16-324SN 16 16 D
®
19 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 16 Pin 377PN ZP-16-377PN 19 12 A
Crimp Socket 377SN ZP-16-377SN
®
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
01
36º
02
57º
03 90º
N
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
16
17
01
36
o
02 72
o
03 108
o
04
144
o
05
198
o
234
o
06
07
270
o
08
306
o
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
01
60
o
02 90
o
03
150
o
04
211
o
05
255
o
06
300
o
N
1
01
24o
2
3
4
5
6
7
8910
11
12
13
14
15
16
17 18
19
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
71
STAR-LINE®
Insert Configurations
front face of pin insert shown
19 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 16 Pin 312PN ZP-16-312PN 19 12 A
Crimp Socket 312SN ZP-16-312SN
19 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 355PN ZP-16-355PN 19 16 A
Socket 355SN ZP-16-355SN
19 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 20 Pin 376PN ZP-20-376PN 19 12 D
Crimp Socket 376SN ZP-20-376SN
®
19 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 388PN ZP-20-388PN 19 12 D
Socket 388SN ZP-20-388SN
®
®
N
1
23
4
5
6
7
8
9
10
11
12 13
14
15
16
17
18
19
02
48o
03
144o
N
1
2
3
4
5
6
7
8
9
10
11 12
13
14
15
16
17
18 19
01
36
o
02 72
o
03 108
o
04
144
o
05
06
216
o
07
252
o
08
288
o
09
324
o
180
o
N
1
2
3
4
56
7
8
9
10
11
12
13
14 15
16
17
18
19
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
72
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
front face of pin insert shown
20 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 20 Pin 387PN ZP-20-387PN 20 12 B Center
Crimp Socket 387SN ZP-20-387SN A Outer
®
20 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 334PN ZP-20-334PN 4 8 D
Socket 334SN ZP-20-334SN 16 16 D
®
21 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 344PN ZP-16-344PN 10 12 A
Socket 344SN ZP-16-344SN 11 16 A
Mod I Solder 20 Pin 32P ZP-20-32P 20 12 B Center
Socket 32S ZP-20-32S A Outer
Mod II Radsok 20 Pin 332PN ZP-20-332PN
Crimp Socket 332SN ZP-20-332SN
20 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
®
®
N
1
2
34
5
67
8
9
10
11
12
13
14
15
16
17 18
19
20
01
56o
N
1
23
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
01
60o
02
120o
03
180o
05
300o
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
01
43
o
30'
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
01
30o
02 90o
03
150o
05
222o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
73
STAR-LINE®
Insert Configurations
front face of pin insert shown
27 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 335PN ZP-16-335PN 3 12 A
Socket 335SN ZP-16-335SN 24 16 A
27 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 373PN ZP-16-373PN 24 16 A
Socket 373SN ZP-16-373SN 3 12 A
®
Mod I Solder 16 Pin 37P ZP-16-37P 4 12 A
Socket 37S ZP-16-37S 4 16 A
18 18 A
26 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
22 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 331PN ZP-20-331PN 2 8 E
Socket 331SN ZP-20-331SN 20 16 D
®
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
01
45
o
02 90
o
03
191
o
15'
N
123
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22 23
24
25
26
01
36o
02
72o
03 108o
04
144o
05
180o
06
216o
07
252o
08
288o
09
324o
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
02 90
o
01
33
o
30'
N
1
2
3
4
567
8
9
10
11
12
13
14G
15
16
17
18
19 20
21
22
23
24
25
26 27
01
54
o
02 90
o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
74
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
front face of pin insert shown
37 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 20 Pin 386PN ZP-20-386PN 37 12 A
Crimp Socket 386SN ZP-20-386SN
®
®
29 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp C28 Pin 328PN ZP-C28-328PN 4 1/0 D
Socket 328SN ZP-C28-328SN 2 8 D
23 12 A
37 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 321PN ZP-16-321PN 37 16 A
Socket 321SN ZP-16-321SN
27 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 374PN ZP-20-374PN 2 4 D
Socket 374SN ZP-20-374SN 25 12 A
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
01
30
o
02
45
o
03 90
o
04
120
o
05
150
o
06
225
o
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25
26
27
28
01
45o
02
66o
03 90o
04
135o
05
155o
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
2930 31
32
33
34
35
36 37
01
32
o
30'
02
65
o
03 97
o
30'
04
130
o
05
162
o
30'
195º
06
07
227
o
30'
260
o
08
09
292
o
30'
N
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34 35
36
37
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
75
STAR-LINE®
Insert Configurations
front face of pin insert shown
38 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 323PN ZP-20-323PN 3 10 A
Socket 323SN ZP-20-323SN 35 16 A
®
37 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 20 Pin 350PN ZP-20-350PN 37 12 A
Crimp Socket 350SN ZP-20-350SN
®
37 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 24 Pin 371PN ZP-24-371PN 37 16 D
Socket 371SN ZP-24-371SN
®
37 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C24 Pin 36P ZP-C24-36P 2 1/0 D
Socket 36S ZP-C24-36S 35 12 A
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19
20
21
22 02 100
o
23
24
25
26
27
28
29
30
31
32
33
34
35
36 37
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
31 32
33
34
35
36 37
01
02
03 90
o
45
o
15
o
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19 20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
01
25o
02 76o
03
127o
04
05
254o
178o
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
01
27
o
02
60
o
90
o
03
04
117
o
05
225
o
255
o
06
07
283
o
08
315
o
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
76
STAR-LINE®
Amphenol
INDUSTRIAL
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 22
23
24
25
26
27
28
29
30
31
32
33
34
35 36
37
38
39
40
41 42
01
30
o
02
60
o
03 90
o
04
120
o
05
150
o
06
180
o
Insert Configurations
front face of pin insert shown
47 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 15P ZP-C28-15P 1 1/0 D
Socket 15S ZP-C28-15S 3 4 D
43 12 A
42 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 28 Pin 339PN ZP-28-339PN 42 12 D
Crimp Socket 339SN ZP-28-339SN
46 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 371PN ZP-16-371PN 45 18 A
Socket 371SN ZP-16-371SN 1 8 A
®
47 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 354PN ZP-20-354PN 2 8 D
Socket 354SN ZP-20-354SN 45 16 A
®
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22 23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
N
01
30o
02
60o
03 90o
04
120o
05
150o
06
180o
03
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25
26 27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42 43
44
45
46
47
N
01
60
o
02
120
o
180
o
04
240
o
05
300
o
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
77
STAR-LINE®
N
1
2
3
4
5
6
7
8
910 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 32 33
34
35
36
37
38
39
40
41
42
43
44
45
46 47
48
49
50
51
52
53
54
55
56
57
58
01
165
o
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 25 26
27 28 29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45 46
47
48
49
50
N
01
30o
02
60o
03
120o
04
150o
05
225o
06
315o
Insert Configurations
front face of pin insert shown
Mod II Crimp 28 Pin 324PN ZP-28-324PN 3 8 D
Socket 324SN ZP-28-324SN 6 4 D
5 12 A
41 16 A
58 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 24 Pin 84P ZP-24-84P 58 12 A
Socket 84S ZP-24-84S
Mod II Radsok 24 Pin 384PN ZP-24-384PN
Crimp Socket 384SN ZP-24-384SN
50 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod III Crimp 20 Pin 673PN 4 8 D
Socket 673SN 46 16 A
®
55 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod III Crimp 16 Pin 640PN 55 18 Inst.
Socket 640SN
®
55 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 21 22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54 55
N
10
345
o
01
32
o
02
60
o
03 90
o
04
117
o
05
150
o
06
180
o
07
220
o
08
255
o
09
285
o
N
123
45
678910
11 12 13
14 15
16 17 18 19
20
21 22
23 24 25
26 27 28 29
30 31
32
33 34
35 36
37
38
39
40
41 42 43 44 45
46 47 48 49
50
51
52 53 54
55
01
30
o
90
o
02
03
180
o
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
78
STAR-LINE®
Amphenol
INDUSTRIAL
Insert Configurations
front face of pin insert shown
58 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 24 Pin 352PN ZP-24-352PN 58 12 A
Crimp Socket 352SN ZP-24-352SN
60 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder 20 Pin 35P ZP-20-35P 60 16 A
Socket 35S ZP-20-35S
®
60 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 24 Pin 331PN ZP-24-331PN 7 12 A
Socket 331SN ZP-24-331SN 53 16 A
®
N
123
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
20o
01
02
120o
03
180o
04
225o
05270o21
22
23
24
25
26 27
28 29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52 53
54
55
56
57
58
59
60
20
o
03
120
o
06
180
o
04
225
o
05270
o
01
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
45o
01
46
47
48
49
50
51
52
53
54
55
56
57
58
®
60 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 24 Pin 389PN ZP-24-389PN 60 16 A
Crimp Socket 389SN ZP-24-389SN
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
79
STAR-LINE®
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 25 26
27 28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47 48
49
50
51
52
53
54
01 90
o
02
135
o
03
202
o
30'
55
56
57
58
59
60
61
62
63
64
61 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 16 Pin 333PN ZP-16-333PN 61 18 Inst.
Socket 333SN ZP-16-333SN
®
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
01
02 105
o
03
150
o
04
232
o
30'
75
o
55
56
57
58
59
60 61
64 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 329PN ZP-20-329PN 2 10 A
Socket 329SN ZP-20-329SN 62 16 A
®
68 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 313PN ZP-20-313PN 68 16 A
Socket 313SN ZP-20-313SN
®
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
02
45
o
03
157
o
30'
04
228
o
05
292
o
30'
55
56
57
58
59
60
61
62
63
64
65
66
67
68
62 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Radsok 20 Pin 362PN ZP-24-362PN 44 12 A
Crimp Socket 362SN ZP-24-362SN 18 16
®
front face of pin insert shown
Insert Configurations
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
80
STAR-LINE®
Insert Configurations
front face of pin insert shown
90 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 345PN ZP-20-345PN 90 18 A
Socket 345SN ZP-20-345SN
®
N
123
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29 30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
54
o
01
90
o
02
03
130
o
04
180
o
05
225
o
270
o
06
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89 90
81 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 20 Pin 344PN ZP-20-344PN 11 12 A
Socket 344SN ZP-20-344SN 70 18 A
®
Mod II Crimp 24 Pin 354PN ZP-24-354PN 3 8 A
Socket 354SN ZP-24-354SN 11 12 A
61 16 A
75 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
N
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30 31
32 33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
01
30
o
02
60
o
03 90º
04
127
o
05
160º
06
180
o
07
207
o
30'
08
09
311
o
15'
270
o
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 21
22 23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44 45
46 47
48
49
50
51
52
53
54
01
45
o
02 90
o
03
135
o
04
180
o
05
225
o
06270
o
07
300
o
55
56
57
58
59
60
61
62
63 64 65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
Mod II Radsok 24 Pin 388PN ZP-24-388PN 72 16 A
Crimp Socket 388SN ZP-24-388SN
72 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
(06) 180º
(05) 150º
(04) 120º
(03) 90º
(01) 30º
N
(02) 60º
Amphenol
INDUSTRIAL
81
STAR-LINE®
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28 29 30
31 32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56 57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77 78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
N
60
o
01
100 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 28 Pin 314PN ZP-28-314PN 17 12 A
Socket 314SN ZP-28-314SN 83 16 A
®
143 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 28 Pin 322PN ZP-28-322PN 143 16 A
Socket 322SN ZP-28-322SN
100 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 24 Pin 385PN ZP-24-385PN 100 16 A
Socket 385SN ZP-24-385SN
®
®
Insert Configurations
front face of pin insert shown
100 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod II Crimp 24 Pin 313PN ZP-24-313PN 100 16 A
Socket 313SN ZP-24-313SN
®
1
2
3
4
5
678910 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37 38 39 40 41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62 63 64 65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81 82 83
84
85
86
87
88
89
90
91
92
93
94 95
96
97
98
99
100
N
123
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36 37 38 39
40 41 42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70 71 72
73 74 75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133 134
135
136
137
138
139
140
141
142
143
N
01
46o30'
N
123
4
5
6
7
8
9
10
11
12
13
14
15
16
1718
19
20
21
22
23
24
25
26
27
28
29
30
31 32 33 34 35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57 58
59 60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
8586
87
88
89
90
91
92
93
94
95
9697
98
99
100
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
Amphenol
INDUSTRIAL
82
STAR-LINE®
Amphenol
INDUSTRIAL
V.F.D. Insert Configurations
front face of pin insert shown
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Pressure 20 Pin 43PR ZP-20-43PR 4 4 D
Socket 43SR ZP-20-43SR 2 10 D
Mod III Crimp 20 Pin 643PN
Socket 643SN
N
1
01
30
o
02
120
o
03
180º
04
05270
o
240
o
2
34G
5
6
®
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 18P ZP-C28-18P 4 350 MCM D
Socket 18S ZP-C28-18S 2 12 E
Mod I Radsok C28 Pin R18P ZP-C28-R18P
Solder Socket R18S ZP-C28-R18S
N
1
2
3
4
5
6
01
60
o
02
03
195
o
120
o
A variable-frequency drive (VFD) controls the rotational speed
of an alternating current (AC) electric motor by controlling the
frequency of the electrical power supplied to the motor. VFD
motors operate at varied voltages and frequencies, which in turn
create higher operating temperatures - creating issues for most
electrical connectors. Amphenol is able to meet the operating
requirements of a VFD motor by incorporating a specially
designed insert material. The inserts can carry a higher dielectric
rating. allowing them to withstand the voltage spikes found in a
VFD application.
In addition, Amphenol utilizes our patented RADSOK® contact
design in our VFD inserts. The RADSOK® contacts allow a higher
amperage, and result in lower temperature rise in our connectors.
These specic inserts have been selected to accommodate the
phase conductors, as well as grounding conductors present in
VFD rated cables
In addition, shielding contacts are provided in these inserts to
allow for terminating the overall cable shield to reduce EMI.
These inserts are all also rated to 1000 V.A.C.
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
83
STAR-LINE®
V.F.D. Insert Configurations
6 Contacts
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Solder C28 Pin 42P ZP-C28-42P 4 4/0 D
Socket 42S ZP-C28-42S 2 10 D
Mod I Pressure C28 Pin 42PR ZP-C28-42PR
Socket 42SR ZP-C28-42SR
Mod I Radsok C28 Pin R42PR ZP-C28-R42PR
Pressure Socket R42SR ZP-C28-R42SR
N
1
2
3
4G
56
01 90o
02
126o
03
180o
UL
®
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Radsok C28 Pin R44PR ZP-C28-R44PR 3 4/0 D
Pressure Socket R44SR ZP-C28-R44SR 3 8 D
1 10 D
Contact
Symbols
Wire Size
AWG
18 16 12 10 8 4 1/0 4/0 350 MCM 500 MCM 646-777
Metric 0.75 1.5 4.0 6.0 10.0 25.0 50.0 120.00 185.00 240.00 300-400
Grounding Contact Termination Symbol
Solder Well Pressure Crimp
Pre-assembled insert should be ordered mounted in barrel. SERVICE VOLTAGE RATING
A = 240V, D = 600V
7 Contacts N
front face of pin insert shown
Wire Service
Style Terminal Shell Insert Dash Catalog Qty. Size Voltage
Type Size Type Number Number AWG Rating
Mod I Radsok C24 Pin R44PR ZP-C24-R44PR 3 1/0 D
Pressure Socket R44SR ZP-C24-R44SR 3 8 D
7 Contacts N
Refer to factory for current alternate keyways.
Amphenol
INDUSTRIAL
84
STAR-LINE®
Amphenol
INDUSTRIAL
Basic Barrel for Panel,
Square Flange Receptacle
Square ange receptacles only for Mod I
are designated by a four digit number.
Example: ZP-WO-1712 (Star-Line)
Square ange receptacles only for Mod II
are designated by a seven digit number.
Example: ZP-WO-1712-200 (Star-Line)
Mod II inserts must not be used in Mod I
shells or Mod I inserts in Mod II shells
as the method of accomplishing
environmental sealing differs.
Drill hole on panel 1/64" larger than Dimension “E” for front mounting or Dimension “C”for back mounting.
**Maximum panel thickness may be increased 1/8" when using Standard Coupling Nut Plugs.
A Sq.
B Sq. D
G
E
C
Modified
Acme thread F
1/16" Gasket
fits front or
back of
flange
Tapered
left-hand
thread
Max Panel Thickness
when back mounted
using jack nut plugs
H hole Dia.
DIMENSIONS
Shell Cat. No.
Size Mod I A B C D E F G H
12 ZP-WO-1712 1-3/4 1-3/8 1-1/2 2-1/64 1-3/8 1 1/4 11/64
16 ZP-WO-1716 2-1/4 1-11/16 2 2-1/64 1-7/8 1 1/4 13/64
20 ZP-WO-1720 2-3/4 2-3/32 2-1/2 2-1/64 2-3/8 1 1/4 7/32
C20 ZP-CO-1720 2-3/4 2-3/32 2-1/2 2-33/64 2-3/8 1-1/2 3/4 7/32
24 ZP-WO-1724 3-1/4 2-17/32 3 2-1/64 2-7/8 1 1/4 9/32
C24 ZP-CO-1724 3-1/4 2-17/32 3 2-33/64 2-7/8 1-1/2 3/4 9/32
28 ZP-WO-1728 3-3/4 3-1/32 3-1/2 2-1/64 3-3/8 1 1/4 11/32
C28 ZP-CO-1728 3-3/4 3-1/32 3-1/2 2-33/64 3-3/8 1-1/2 3/4 11/32
Connector Components
Spare Parts and Accessories
Male Skirt for Straight Plug
Male skirts only for Mod I are designated by a
four-digit number.
Example: ZP-W-1312 (Star-Line)
Male skirts only for Mod II are designated by
a seven-digit number.
Example: ZP-W-1312-200 (Star-Line)
Mod II inserts must not be used in
Mod I shells or Mod I inserts in Mod II
shells as the method of accomplishing
environmental sealing differs
Female Skirt for In-Line
Receptacle
Female skirts only for Mod I are designated
by a four-digit number.
Example: ZP-WO-1512 (Star-Line)
Female skirts only for Mod II are
designated by a seven-digit number.
Example: ZP-WO-1512-200 (Star-Line)
Mod II inserts must not be used in
Mod I shells or Mod I inserts in Mod II
shells as the method of accomplishing
environmental sealing differs.
A
Tapered left-hand thread
Shell Cat. No. DIMENSIONS
Size Mod I A
12 ZP-W-1312 2-1/64
16 ZP-W-1316 2-1/64
20 ZP-W-1320 2-1/64
C20 ZP-C-1320 2-33/64
24 ZP-W-1324 2-1/64
C24 ZP-C-1324 2-33/64
28 ZP-W-1328 2-1/64
C28 ZP-C-1328 2-33/64
DIMENSIONS
Shell Cat. No.
Size Mod I A B C D E F
A
B
Safety wire holes
(3) .062 Dia.
F
E
CD
Modified
Acme
thread
Tapered
left-hand
thread
3/16
12 ZP-WO-1512 1-3/4 1-61/64 1-1/2 1-3/32 1 2-1/64
16 ZP-WO-1516 2-1/4 2-31/64 2 1-19/32 1 2-1/64
20 ZP-WO-1520 2-3/4 3-1/32 2-1/2 2-3/32 1 2-1/64
C20 ZP-CO-1520 2-3/4 3-1/32 2-1/2 2-3/32 1-1/2 2-33/64
24 ZP-WO-1524 3-1/4 3-9/16 3 2-19/32 1 2-1/64
C24 ZP-CO-1524 3-1/4 3-9/16 3 2-19/32 1-1/2 2-33/64
28 ZP-WO-1528 3-3/4 4-1/16 3-1/2 3-3/32 1 2-1/64
C28 ZP-CO-1528 3-3/4 4-1/16 3-1/2 3-3/32 1-1/2 2-33/64
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
85
STAR-LINE®
Cable Grip
Components
Gland washers are not required when
grommets are used with basket weave
cable grips.
.062 .125 02 ZP-6312-2C
ZP-8012-4E ZP-5012-4E 3
.125 .250 04 ZP-6312-4C
.250 .375 06 ZP-6312-6C ZP-5012-6E 4
ZP-8012-8E
.375 .500 08 ZP-6312-8C ZP-5012-8E 5
12 .500 .625 10 ZP-6312-10C ZP-5012-10E 6
ZP-8012-12E
.625 .750 12 ZP-6312-12C ZP-5012-12E 7
.750 .875 14 ZP-6312-14C ZP-5012-14E 7-1/2
ZP-8012-15E
.875 .937 15 ZP-6312-15C ZP-5012-15E 8
.250 .375 06 ZP-6316-6C ZP-5016-6E 4
ZP-8016-8E
.375 .500 08 ZP-6316-8C ZP-5016-8E 5
.500 .625 10 ZP-6316-10C ZP-5016-10E 6
ZP-8016-12E
.625 .750 12 ZP-6316-12C ZP-5016-12E 7
.750 .875 14 ZP-6316-14C ZP-5016-14E 7-1/2
16 ZP-8016-16E
.875 1.000 16 ZP-6316-16C ZP-5016-16E 8-1/2
1.000 1.125 18 ZP-6316-18C ZP-5016-18E 9
ZP-8016-20E
1.125 1.250 20 ZP-6316-20C ZP-5016-20E 10
1.250 1.375 22 ZP-6316-22C
ZP-8016-23E ZP-5016-23E 10-1/2
1.375 1.437 23 ZP-6316-23C
.500 .625 10 ZP-6320-10C ZP-5020-10E 6
ZP-8020-12E
.625 .750 12 ZP-6320-12C ZP-5020-14E 7-1/2
.750 .875 14 ZP-6320-14C ZP-5020-14E 7-1/2
ZP-8020-16E
.875 1.000 16 ZP-6320-16C ZP-5020-18E 9
1.000 1.125 18 ZP-6320-18C ZP-5020-18E 9
ZP-8020-20E
20/C20 1.125 1.250 20 ZP-6320-20C ZP-5020-20E 10
1.250 1.375 22 ZP-6320-22C
ZP-8020-24E ZP-5020-24E 11
1.375 1.500 24 ZP-6320-24C
1.500 1.625 26 ZP-6320-26C
ZP-8020-28E ZP-5020-28E 13
1.625 1.750 28 ZP-6320-28C
1.750 1.875 30 ZP-6320-30C
ZP-8020-31E ZP-5020-31E 14-1/2
1.875 1.937 31 ZP-6320-31C
.875 1.000 16 ZP-6324-16C ZP-8024-16E ZP-5024-16E 8-1/2
1.000 1.125 18 ZP-6324-18C
ZP-8024-20E ZP-5024-20E 10
1.125 1.250 20 ZP-6324-20C
1.250 1.375 22 ZP-6324-22C
ZP-8024-24E ZP-5024-24E 11
1.375 1.500 24 ZP-6324-24C
1.500 1.625 26 ZP-6324-26C
24/C24 ZP-8024-28E ZP-5024-28E 13
1.625 1.750 28 ZP-6324-28C
1.750 1.875 30 ZP-6324-30C
ZP-8024-32E ZP-5024-32E 15
1.875 2.000 32 ZP-6324-32C
2.000 2.125 34 ZP-6324-34C
ZP-8024-36E ZP-5024-36E 16
2.125 2.250 36 ZP-6324-36C
2.250 2.375 38 ZP-6324-38C
ZP-8024-39E ZP-5024-39E 17-1/2
2.375 2.437 39 ZP-6324-39C
1.375 1.500 24 ZP-6328-24C ZP-8028-24E ZP-5028-28E 13
1.500 1.625 26 ZP-6328-26C
ZP-8028-28E ZP5028-28E 13
1.625 1.750 28 ZP-6328-28C
1.750 1.875 30 ZP-6328-30C
ZP-8028-32E ZP-5028-32E 15
1.875 2.000 32 ZP-6328-32C
2.000 2.125 34 ZP-6328-34C
28/C28 ZP-8028-36E ZP-5028-36E 16
2.125 2.250 36 ZP-6328-36C
2.250 2.375 38 ZP-6328-38C
ZP-8028-40E ZP-5028-40E 17-1/2
2.375 2.500 40 ZP-6328-40C
2.500 2.625 42 ZP-6328-42C
ZP-8028-44E ZP-5028-46E 19
2.625 2.750 44 ZP-6328-44C
2.750 2.875 46 ZP-6328-46C ZP-8028-46E ZP-5028-46E 19
Basket Weave
Cable Dia. Cable Grommets Grips
Dimension Dia. Oil Resistant Gland Washer Nominal
Shell Code Rubber Steel Stainless Steel Length
Size Min. Max. No.* Cat. No. Cat. No. Cat. No. Inches
A
1/16
E
BA
1-3/16
Grommets
Washer
Shell Dimensions
Size A B
12 See 1-7/32
16 cable dia. 1-3/4
20 & C20 column "A" 2-7/32
24 & C24 for cable 2-3/4
28 & C28 range 3-1/4
Gland Washers
Washer
Shell Dimensions
Size A B
12 See 1-1/4
16 cable dia. 1-3/4
20 & C20 column "A" 2-1/4
24 & C24 for cable 2-3/4
28 & C28 range 3-1/4
* Substitute Symbol for in Cable
Adapter Catalog Number
Amphenol
INDUSTRIAL
86
STAR-LINE®
Amphenol
INDUSTRIAL
A
Coupling Nuts
(Star-Line only)
Potting Sleeve
Insert Clamp Nuts Used when open-back wiring is desired behind panelboards or
within large junction boxes on which the basic barrel is mounted
For use with insert clamp nut or panel board adapter to accept compound for
sealing wire terminals. Potting sleeves are not for use with pressure-type con-
tact units with insulator extension at back.
Connector Accessories
Shell Catalog No. DIMENSIONS
Size Standard Nut A B
Shell Catalog No. DIMENSIONS
Size Jacking Nut A B
12 ZP-7012-30A 1-1/32 1-13/16
16 ZP-7016-30A 1-1/32 2-5/16
20/C20 ZP-7020-30A 1-1/32 2-13/16
24/C24 ZP-7024-30A 1-1/32 3-5/16
28/C28 ZP-7028-30A 1-1/32 3-13/16
12 ZP-7012-10A 47/64 1-13/16
16 ZP-7016-10A 47/64 2-5/16
20/C20 ZP-7020-10A 47/64 2-13/16
24/C24 ZP-7024-10A 47/64 3-5/16
28/C28 ZP-7028-10A 47/64 3-13/16
Without Potting With Type 8200 DIMENSIONS
Shell Sleeve Potting Sleeve
Size Cat. No. Cat. No. A B
12 ZP-W-7512 ZP-W-7512-B 1-11/32 1-3/32
16 ZP-W-7516 ZP-W-7516-B 1-27/32 1-19/32
20 & C20 ZP-W-7520 ZP-W-7520-B 1-11/32 2-3/32
24 & C24 ZP-W-7524 ZP-W-7524-B 2-27/32 2-19/32
28 & C28 ZP-W-7528 ZP-W-7528-B 3-11/32 3-3/32
Shell Catalog DIMENSIONS
Size No. Overall Length O. D. I. D.
12 ZP-8212-11 1-1/4 1-3/64 55/64
16 ZP-8216-11 1-1/4 1-35/64 1-23/64
20 & C20 ZP-8220-11 1-1/4 2-3/64 1-55/64
24 & C24 ZP-8224-11 1-1/4 2-35/64 2-23/64
28 & C28 ZP-8228-11 1-1/4 2-63/64 2-51/64
B
A
Modified
Acme
Thread
Metal Potting Adapter Shell Standard Length DIMENSIONS
Size Cat. No. A B C D
12 ZP-8612-11 2-15/32 1.4675 1.12 1-3/32
16 ZP-8616-11 2-15/32 1.8575 1.62 1-19/32
20 & C20 ZP-8620-11 2-15/32 2.3675 2.12 2-3/32
24 & C24 ZP-8624-11 2-15/32 2.8425 2.62 2-19/32
28 & C28 ZP-8628-11 2-15/32 3.4325 3.12 3-3/32
Shell Short Version DIMENSIONS
Size Cat. No. A B C D
12 ZP-8612-12 1-3/4 1.4675 1.12 1-3/32
16 ZP-8616-12 1-3/4 1.8575 1.62 1-19/32
20 & C20 ZP-8620-12 2 2.3675 2.12 2-3/32
24 & C24 NA
28 & C28 NA
Shell Catalog No. DIMENSIONS
Size Delay Nut A1 B1
12 ZP-7012-20A 3.09 1.71
16 ZP-7016-20A 3.09 2.00
20/C20 ZP-7020-20A 3.09 2.50
24/C24 ZP-7024-20A 3.75 3.00
28/C28 ZP-7028-20A 3.75 3.50
A1
B1
(3) Safety Wire Holes
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
87
STAR-LINE®
A
Thread
Tapered
Left-hand Thread
B
Cable Adapter Components
and Accessories
Conduit Adapters
Tapped for Conduit
For use with all inserts other than those with pressure terminals.
Internal tapered pipe thread takes various types of threaded connectors.
A
E
Thread
D
B
C
Conduit DIMENSIONS
Shell Tap Catalog
Size Size No. A B C D E
12 3/4 ZP-W-2812 2-5/8 1-13/32 1-1/2 1-3/8 3/4
16 1-1/4 ZP-W-2816 2-3/4 1-29/32 2 1-7/8 1-1/4
20 & C20 1-1/2 ZP-W-2820 2-7/8 2-13/32 2-1/2 2-3/8 1-1/2
24 & C24 2 ZP-W-2824 3 2-29/32 3 2-7/8 2
28 & C28 2-1/2 ZP-W-2828 3-15/32 3-13/32 3-1/2 3-3/8 2-1/2
Cable Adapter Standard Extra Long DIMENSIONS
Thread Shell Style Long Style Style A B
Size Size Cat. No. Cat. No. Cat. No. Std. Lg. X Lg.
1-3/8-12 12 ZP-W-2012 ZP-W-2412 ZP-W-2912 3 5-1/4 6-1/2 1-3/8
1-7/8-12 16 ZP-W-2016 ZP-W-2416 ZP-W-2916 3-1/4 5-1/2 6-3/4 1-7/8
2-3/8-12 20 & C20 ZP-W-2020 ZP-W-2420 ZP-W-2920 3-3/4 6 7-1/4 2-3/8
2-7/8-12 24 & C24 ZP-W-2024 ZP-W-2424 ZP-W-2924 4-1/4 6-1/2 7-3/4 2-7/8
3-3/8-12 28 & C28 ZP-W-2028 ZP-W-2428 ZP-W-2928 4-3/4 6-3/4 8 3-3/8
NPT
Shell Size
Conduit Tap
Size Catalog No. A Dim. B Dim. C Dim. D Dim. E Dim.
12 M25 ZP-W-2412-H402 4.00 1.39 1.50 1.38 M25
16 M40 ZP-W-2416-H402 6.00 1.89 2.00 1.88 M40
20 & C20 M50 ZP-W-2420-H40 6.00 2.39 2.50 2.38 M50
24 & C24 M63 ZP-W-2424-H402 6.00 2.89 3.00 2.88 M63
28 & C28 M75 ZP-W-2428-H402 6.00 3.9 3.50 3.38 M75
DIMENSIONS
Metric
Amphenol
INDUSTRIAL
88
STAR-LINE®
Amphenol
INDUSTRIAL
Panelboard Adapters
(Star-Line only)
Mechanical Clamp Nut Shell Catalog DIMENSIONS
Size No. A B C D
12 ZP-W-5312 2-3/8 1-3/4 7/8 2
16 ZP-W-5316 3 2-1/4 15/16 2-1/16
20 & C20 ZP-W-5320 3-3/4 2-3/4 1 2-1/8
24 & C24 ZP-W-5324 4-1/2 3-1/4 1-1/16 2-3/16
28 & C28 ZP-W-5328 5-1/8 3-3/4 1-1/8 2-1/4
Cable Adapter Components
and Accessories
For Basic Barrels. Used when a completely external mounting is
required. Gasket furnished may be used for front panel mounting
only.
Shell Catalog DIMENSIONS
Size No. A B C D E F G H J
12 ZP-W-2112 1-5/8 1-1/4 1-1/8 1-3/32 3/32 9/16 3/4 1-3/8 3/16
16 ZP-W-2116 2-1/8 1-11/16 1-5/8 1-19/32 1/8 9/16 25/32 1-7/8 7/32
20 & C20 ZP-W-2120 2-5/8 2-3/32 2-1/8 2-3/32 5/32 9/16 13/16 2-3/8 9/32
24 & C24 ZP-W-2124 3-1/8 2-17/32 2-5/8 2-19/32 3/16 9/16 27/32 2-7/8 11/32
28 & C28 ZP-W-2128 3-3/4 3-1/32 3-1/8 2-3/32 9/32 29/64 27/32 3-3/8 11/32
A Square
B Square
J Hole
Dia.
C H
F
E
G
Tapered
Left-hand Thread
A
Maximum
B
Reversible
clamps for
complete
cable range D
C
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
89
STAR-LINE®
Transition Adapters Transition adapters provide for using cable adapters one shell
size larger than that of the basic barrel selected. They are used
when terminating shielded cables require an increase in adapter
diameter for additional wiring space.
Adapter
Shell Shell DIMENSIONS
Size Size Catalog No. A B C D
12 16 ZP-W-2316-40 2 2-15/64 1-19/32 1-3/32
16 20 & C20 ZP-W-2320-40 2-1/2 2-49/64 2-3/32 1-19/32
20 & C20 24 & C24 ZP-W-2324-40 3 3-9/32 2-19/32 2-3/32
24 & C24 28 & C28 ZP-W-2328-40 3-1/2 3-15/16 3-3/32 2-19/32
Gland Nut
Use plain, or with basket weave cable grip
A
1-1/4
B
Shell Catalog DIMENSIONS
Size No. A B
12 ZP-7312-10A 1-1/2 1-9/32
16 ZP-7316-10A 2 1-25/32
20 & C20 ZP-7320-10A 2-1/2 2-9/32
24 & C24 ZP-7324-10A 3 2-25/32
28 & C28 ZP-7328-10A 3-1/2 3-9/32
Safety Jam Nuts To securely lock plug coupling nut or threaded dust cap. Jam nut cannot
be used on barrels with hinged spring cover.
Cable Adapter Components
and Accessories
Shell Catalog DIMENSIONS
Size No. A B
12 ZP-7212-10A 1-3/4 1-61/64
16 ZP-7216-10A 2-1/4 1-32/64
20 & C20 ZP-7220-10A 2-3/4 3-1/2
24 & C24 ZP-7224-10A 3-1/4 3-9/16
13/32
3/8
C D
Tapered
left-hand
thread
B
A
Modified
Acme
Thread
1/4 A
B
Amphenol
INDUSTRIAL
90
STAR-LINE®
Environmental covers are furnished with a six-inch length of stainless steel link chain. The chain is freely attached to a
shouldered swivel post to avoid twisting when covers are applied or removed. The opposite end has a stainless steel
ring for back of barrel attachment or a stainless steel eyelet for ange screw or separate screw attachment.
Example: ZP-W-5512-A (Starline)
Connector Accessories - Protection
Covers & Caps
Environmental Covers with Chain
APPLICATION:
RING TYPE: For use with plugs and inline
receptacles. To assemble slide ring over back end
of barrel before applying cable adapter.
EYELET TYPE: For use with ange mount plugs
and ange mount receptacles. To assemble attach
eyelet to ange mounting screw or drill and tap
hole in adjacent mounting surface.
Cover Cover
Shell Catalog No. Catalog No. DIMENSIONS
Size with Ring and Chain with Eyelet and Chain A D E F
12 ZP-W-5512-A ZP-WF-5512-A 1-1/2 1-1/2 1-1/4 11/64
16 ZP-W-5516-A ZP-WF-5516-A 2 1-1/2 1-3/4 13/64
20 ZP-W-5520-A ZP-WF-5520-A 2-1/2 1-1/2 2-1/4 7/32
C20 ZP-C-5520-A ZP-CF-5520-A 2-1/2 2 2-1/4 7/32
24 ZP-W-5524-A ZP-WF-5524-A 3 1-1/2 2-3/4 9/32
C24 ZP-C-5524-A ZP-CF-5524-A 3 2 2-3/4 9/32
28 ZP-W-5528-A ZP-WF-5528-A 3-1/2 1-1/2 3-1/4 11/32
C28 ZP-C-5528-A ZP-CF-5528-A 3-1/2 2 3-1/4 11/32
Threaded
Cap for
Plugs
Threaded
Cap for
Receptacles
Cap has a captive
gasket for sealing.
Cover Cover
Shell Catalog No. Catalog No. DIMENSIONS
Size with Ring and Chain with Eyelet and Chain E F G
12 ZP-W-5612-A ZP-WF-5612-A 1-1/4 11/64 1-23/32
16 ZP-W-5616-A ZP-WF-5616-A 1-3/4 13/64 2-7/32
20/C20 ZP-W-5620-A ZP-WF-5620-A 2-1/4 7/32 2-23/32
24/C24 ZP-W-5624-A ZP-WF-5624-A 2-3/4 9/32 3-7/32
28/C28 ZP-W-5628-A ZP-WF-5628-A 3-1/4 11/32 3-23/32
Modified
Acme
Thread
Dia.
D
A
1-1/16
Modified
Acme
Thread
Dia. G
E
Ring Dia.
6 "
Chain
F
Dia.
on Eyelet
Amphenol
INDUSTRIAL
91
STAR-LINE®
Plastic Dust Caps
Hinged Spring Door Covers-Gasketed
D1D
L1L
For Receptacles For Plugs
For temporary protection of assembled barrels while in storage and shipment.
Covers have a stainless steel band to clamp over the coupling thread of female receptacles. The cover plate
with a captive rubber gasket is pressed aluminum. A self-aligning seal is assured by the oating action of
the cover on the center stainless-steel shouldered post. The hinge arm and support are machined aluminum
extrusions.
Connector Accessories - Protection
Covers & Caps
Shell Short Hinged Type DIMENSIONS
Size Catalog No. A B C
12 ZP-C-5712 1-19/32 1-1/2 2-1/2
16 ZP-C-5716 1-19/32 1-3/4 2-3/4
20 & C20 ZP-C-5720 1-41/64 2-9/64 3-9/16
24 & C24 ZP-C-5724 1-41/64 2-25/64 3-25/64
28 & C28 ZP-C-5728 1-41/64 2-5/8 3-5/8
APPLICATION:
SHORT HINGED TYPE:
To clear standard coupling
nut - Use with Square Flange
Receptacles when front or back
mounted.
C
B
A (Short Hinged Type)
A1 (Long Hinged Type)
9/32
Shell Long Hinged Type DIMENSIONS
Size Catalog No. A1 B C
12 ZP-C-5712-14 1-23/32 1-1/2 2-1/2
16 ZP-C-5716-14 1-23/32 1-3/4 2-3/4
20 & C20 ZP-C-5720-14 1-49/64 2-9/64 3-9/16
24 & C24 ZP-C-5724-14 1-49/64 2-25/64 3-25/64
28 & C28 ZP-C-5728-14 1-41/64 2-5/8 3-5/8
APPLICATION:
LONG HINGED TYPE:
To clear coupling jack nut -
Use with Square Flange
Receptacles when front mounted
only.
Shell Plug Caps DIMENSIONS
Size Catalog No. D1 L1
12 ZP-5512-11 1-13/32 11/16
16 ZP-5516-11 1-29/32 11/16
20 & C20 ZP-5520-11 2-3/8 11/16
24 & C24 ZP-5524-11 2-29/32 11/16
28 & C28 ZP-5528-11 3-11/16 1/2
Shell Receptacle Caps DIMENSIONS
Size Catalog No. D L
12 ZP-5612-11 1-3/4 5/8
16 ZP-5616-11 2-1/4 11/16
20 & C20 ZP-5620-11 2-22/32 21/32
24 & C24 ZP-5624-11 3-7/32 21/32
28 & C28 ZP-5628-11 3-15/16 1/2
Amphenol
INDUSTRIAL
92
STAR-LINE®
Amphenol
INDUSTRIAL
A
C B
Conduit Fitting Bodies - FS and FD Type available in die cast
copper-free aluminum or cadmium plated ferrous alloy
Conduit System Accessories
FS and FD Conduit Adapter Covers
and Conduit Fitting Bodies
Adapter covers and Bodies have environmental resistance
adequate for most general applications.
All adapter covers are supplied with screws and clips for mounting
receptacle as well as bolts, washers and gasket for mounting cover
to panel or conduit tting body.
Cast aluminum alloy adapter covers accept type ZRLP barrels.
Conduit
Die Cast Body
Copper-Free Shell Hub Catalog DIMENSIONS
Aluminum Type Size Size No. A B C
12 1/2 N-FS18 4-9/16 2-13/16 2-1/16
FS 12 3/4 N-FS28 4-9/16 2-13/16 2-1/16
12 1 N-FS38 4-9/16 2-13/16 2-1/16
Conduit
Cadmium Plated Body
Ferrous Alloy Shell Hub Catalog DIMENSIONS
Type Size Size No. A B C
FD 16 1 N-FD38 4-9/16 2-13/16 3-1/16
Note: 1/2" and 3/4" hub deep junction boxes information available upon request.
Adapter Cover DIMENSIONS
Style Shell Catalog (Including Barrel)
Size No. A B C D E
12 ZP-C-2512-11
Straight 2-7/8 4-5/16 1-1/2 3-1/4 1-7/8
16 ZP-C-2516-11
12 ZP-C-2512-13
45 Degree 2-7/8 4-5/16 2-5/16 3-1/4 1-7/8
16 ZP-C-2516-13
Conduit Adapter Covers - FS and FD Type
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
93
STAR-LINE®
Conduit System Accessories
Adapter covers and Bodies have environmental resistance
adequate for most general applications.
All adapter covers are supplied with screws and clips for mounting
receptacle as well as bolts, washers and gasket for mounting cover
to panel or conduit tting body.
Cast aluminum alloy adapter covers accept type ZRLP barrels.
Watertight Conduit Adapter Covers
and Conduit Fitting Bodies
DIMENSIONS
Adapter Cover (Including Barrel)
Style Shell Catalog F Pitch
Size No. A B C D UNC-2B
12 ZP-C-2512-10 4-3/16 3-9/16 1 1-27/32 1/4-20
16 ZP-C-2516-10 4-3/16 3-9/16 1 1-27/32 1/4-20
20/C20 ZP-C-2520-10 4-1/2 3-7/8 1-7/32 2-1/16 1/4-20
Straight 24 ZP-C-2524-10 8 7 1-1/2 2-9/16 1/2-13
C24 ZP-C-2524-10 8 7 1-1/2 2-27/32 1/2-13
28 ZP-C-2528-10 8 7 1-1/2 2-9/32 1/2-13
C28 ZP-C-2528-10 8 7 1-1/2 2-25/32 1/2-13
Above should not be used with pressure-type contact inserts.
Adapter Cover DIMENSIONS
Style (Including Barrel)
Shell Standard Deep F Pitch
Size Cat. No. Cat. No. A B C D UNC-2B
12 ZP-C-2512-12 4-3/16 3-9/16 2-13/16 2-7/16 1/4-20
16 ZP-C-2516-12 4-3/16 3-9/16 2-15/16 2-17/32 1/4-20
16 P-202704-16 4-3/16 3-9/16 4-7/16 4-1/16 1/4-20
20 4-1/2 3-7/8 3-39/64 3 1/4-20
ZP-C-2520-12
C20 4-1/2 3-7/8 3-39/64 3-3/8 1/4-20
4-1/2 3-7/8 5 4-1/2 1/4-20
20/C20 ZP-C-2520-26
4-1/2 3-7/8 5 4-7/8 1/4-20
24 8 7 3-33/64 2-19/64 1/2-13
ZP-C-2524-12
C24 8 7 3-33/64 2-21/32 1/2-13
24 8 7 5-3/4 4-9/16 1/2-13
P-202708-24
C24 8 7 5-3/4 5 1/2-13
28 8 7 3-5/8 2-7/16 1/2-13
ZP-C-2528-12
C28 8 7 3-5/8 2-3/4 1/2-13
28 8 7 5-3/4 4-9/16 1/2-13
P-202708-28
C28 8 7 5-3/4 5 1/2-13
Conduit Adapter Covers - Watertight Type
Conduit Adapter Covers cont.
Conduit Conduit
Shell Body Body DIMENSIONS
Size Hub Size Cat. No. A1 A2 B C1 C2 D E F
3/4 P-202760-42 5-1/4 5-1/4 25/64 4-5/8 4-5/8 4-3/16 2-3/8 9/32
12 or 16 1 P-202760-43 5-1/4 5-1/4 25/64 4-5/8 4-5/8 4-3/16 2-3/8 9/32
1-1/4 P-202760-64 5-1/4 5-1/4 25/64 4-5/8 4-5/8 4-3/16 2-3/8 9/32
1-1/2 P-202760-65 5-1/4 5-1/4 25/64 4-5/8 4-5/8 4-3/16 2-3/8 9/32
1-1/4 JRZ-610064 6 6 9/16 5-1/4 5-1/4 4-1/2 3-3/4 9/32
20 or C20 1-1/2 JRZ-610065 6 6 9/16 5-1/4 5-1/4 4-1/2 3-3/4 9/32
2 JRZ-610066 6 6 9/16 5-1/4 5-1/4 4-1/2 3-3/4 9/32
24 or C24 2-1/2 JR-720036-A SEE BOTTOM DRAWING 3-3/4 7/16
28 or C28 3 JRZ-820036-A SEE BOTTOM DRAWING 4-1/2 7/16
D
C
F
116
A
A
B
B
Conduit Fitting Bodies – Cadmium Plated Ferrous Alloy
STANDARD COVER
DEEP COVER
STRAIGHT COVER
CONDUIT FITTING
BODY
Mount with hub at top,
bottom or either side.
FITTING DIMENSIONS
Shell sizes 24/C24 and 28/C28
Amphenol
INDUSTRIAL
94
STAR-LINE®
Amphenol
INDUSTRIAL
TP-201411-AG HAND CRIMP TOOL COMPLETE KIT
This tool is complete with carrying case, checking gage, three contact
locators and complete instructions for crimping #10 through #18 contacts
of MOD II or MOD Ill design.
TP-201411-TO Hand crimp tool only (less locators)
TP-201411-16-18 Locator only for #16 and #18 pins and sockets
TP-201411-10-12 Locator only for #10 pin and sockets and #12 sockets
TP-201411-12P Locator only for all #12 pins any length
Contact Crimping Tools
TP-201351-TC HAND CRIMP TOOL
This tool crimps #18 - #20 contacts utilizing thermocouple wire.
TP-201351-TL HAND CRIMP TOOL
This tool crimps #8 contacts only.
TP-201352-HAND/FOOT PNEUMATIC CRIMP TOOL
This tool is complete with foot control, checking gage, wrench, and com-
plete instructions for crimping #10 through #18 contacts of MOD II or MOD
III design.
Thomas & Betts TOOL NUMBER TBM15 AND DIE NUMBER 15505
To terminate 500 MCM contact.
TP-201328 Crimping Tool Only and Accessories for Contacts #12 through #4/0
TP-201328 CRIMP TOOL
TP-201328 PS-POWER SUPPLY
TP-201328 BC-CARRYING CASE
NOTE: Carrying case will accommodate crimp tool.
NOTE: Power supply will include 5 dies and locators.
TP-201328-F
* Foot control unit with
6 foot hose –
Catalog No. TP-201328-F
Normal operation 100 P.S.I.
Contact Wire Die Check (Locator)
Size Size Number Gage Color Mod II Mod III
12 W Length TP-201328-12
12-14 TP-201328-12D TP-201328-12G Yellow TP-201328-12L
12 C Length TP-201328-12C
10 W Length TP-201328-10
10-12 TP-201328-10D TP-201328-10G Black TP-210328-10L
10 C Length TP-210328-10C
8 W Length TP-201328-8
8-10 TP-201328-8D TP-201328-8G Red TP-201328-8L
8 C Length TP-201328-8C
4 W Length TP-201328-4
4-6 TP-201328-4D TP-201328-4G Brown TP-201328-4L
4 C Length TP-201328-4C
1/0-1 TP-201-328-0D TP-201328-0G
1/0 Blue TP-201328-0C TP-201328-0L
2 TP-201328-2D TP-201328-2G
4/0 4/0 - 3/0 TP-210328-41D TP-201328-41G Green TP-201328-41 TP-201328-41L
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
95
STAR-LINE®
Insertion and Removal Tools
for MOD II & MOD III
A separate expander barrel is required for each cavity of the contact
inset.
An even number of long and short barrels should be used: Example:
if the insert contains four cavities, use two long (EBL) and two short
(EBS). Insert the short ones rst and remove them last.
NOTE: EBS = Expander Barrel Short, EBL= Expander Barrel Long.
Tools for Crimp Type Contacts
Insertion Tools
Used for inserting contacts after they are terminated to conductor. Pin and socket contacts
have identical terminal ends; the same tool is used for both.
The T-Bar handle should be used in the insertion and
extraction of the expander barrel for the 1/0 cavities –only
one is required.
One tapered lead required only.
Removal Tools for MOD II
Insertion Tool
Size Catalog No.
18 TP-201047-1 Use Same
16 TP-201048-1 Tool for
12 TP-201049-1 Pin or
10 TP-201046-1 Socket
Removal Tools
Used for extracting contacts from the insert assembly after contacts have been seated.
Expanders and taper leads are required for sizes 8, 4, 1/0 MOD II contacts only.
Expander
Barrel Tapered T-Bar
Size Catalog No. Lead Style Handle Style
8 TP-201007-A TP-201007-B
4 TP-201033-A TP-201033-B
0 TP-201000-EBL TP-201000-TL TP-201000-TH
0 TP-201000-EBS
Removal Tool Removal Tool
Number Number
Size for Pin for Socket
18 TP-201459 TP-201011-3
16 TP-201459 TP-201010-3
12 TP-201459 TP-201009-3
10 TP-201459 TP-201008-3
Amphenol
INDUSTRIAL
96
STAR-LINE®
Amphenol
INDUSTRIAL
STAR-LINE Connector Assembly
and Termination Instructions
Proper assembly of multiple-contact connectors, for the most part requires common sense. The simplicity of
these instructions is perhaps the reason why they are easily overlooked or taken for granted.
These 27 reminders can help eliminate connector failures caused by improper assembly.
1. Read the assembly instructions carefully before actually
starting to assemble connectors. Besides the matter of
instruction on correct procedures, there are two important
reasons for this preliminary step: To identify the various
component parts, and to check for any missing parts.
2. Cut cable jackets and sheathing squarely and to correct
length, using only wire strippers that have been approved
for the operation. In preparing the individual wires in cables
and harnesses for assembly, make allowances in length
for reaching the outermost circle of contact cavities in the
connector insert. This, of course, means that the conductors
and the insulation should be cut progressively longer as they
extend out from the center of the cable or harness to assure
sufcient length for any necessary forming.
3. Follow specications covering maximum cable stripping
lengths for efcient cable grommet sealing. All wires should be
cut squarely so that they will t into contact wire wells correctly.
4. Before starting actual termination wires, it is essential that
cables and harnesses be laid out in a specied order in
accordance with the wiring diagram. Proper layout will reduce
the need for twisting and crossover of conductors. If the wiring
layout is not correct, the termination operation will be difcult
or even impossible and the chances for making errors will
be increased. Cable and harness assemblies having a spiral
layout also must be matched carefully to the correct contacts
in both the male and female inserts.
5. Some cables have a soft ller or braid on the conductors
which, compresses when external pressure is applied. As a
result, the cable diameter may be reduced to a point where
the sealing range of the grommet is exceeded. In addition,
the seal may take a permanent set and further reduce sealing
efciency. To avoid leakage at the seal under these conditions,
it is suggested that, where construction of the cable permits, a
metal ferrule be slipped under the cable jacket at the stressed
position. This ferrule will serve as a compression supporting
member and enable the gland seal to withstand high external
pressures.
6. Use only correct size sealing grommets to assure resistance
to moisture and other contaminants. Make certain that cable
jacket is smooth where grommet is to seal. Remove any
grooves or ridges if present by sanding or scarng.
7. Use only the proper crimping tools that have been set or
calibrated with precision gages.
8. When contacts are to be soldered, avoid direct contact of
soldering tools to inserts. An open ame or hot soldering tip
can carbonize insulating materials and make them useless.
9. Make certain that all contacts are the correct size before
attempting to assemble them into insert cavities. This point is
particularly important when both power and control types of
contacts are used in the same connector.
10. Be sure that grounding contacts are correctly located.
11. Seat all contacts properly so that they will not be damaged or
become disengaged during connector mating operations.
12. Use only the proper insertion tools and be sure that they are
aligned axially when pushing contacts into their fully seated
position.
13. When inserts have more cavities than conductors, plug unused
cavities with either plain contacts or special seal plugs designed
for the purpose. Some connectors require both a contact and
seal plug in unused cavities to meet military specications and
to assure complete internal environmental sealing.
14. After all terminated contacts are inserted in their respective
cavities and inspected, the cable adapter or insert clamp nut
should be tightened with a wrench. This assembly operation
should be done by placing the components in a vise with
smooth-faced jaws and using a strap wrench.
15. If for any reason terminated conductors have to be removed
from an insert because of any assembly error or change in
circuitry, be sure to remove the cable clamp or insert clamp
nut rst before extracting the contact and reinserting it. This
step is important because any attempt to remove the contacts
when the resilient insulator components are compressed will
result in damage.
16. When handling cables, use adequate support to prevent
damage to the internal wires. Gland nuts and grommets are
intended for sealing purposes and should not be used as a
cable grip.
17. If one of the connector poles is a grounding wire, make sure that
it is grounded properly before the connector is actually engaged.
18. When connectors having the same conguration are to
be mounted close together, different or alternate keying
arrangements should be used to prevent mismating or
cross-mating and possible damage to the electrical system or
human injury.
19. Always inspect all aspects of connector assembly operations
before putting connectors into actual operation.
20. Crimping and terminating of conductors to contacts must be done
carefully. Make certain that wire strands are fully bottomed in
contact wells by checking through inspection hole provided.
21. Soldering conductors to contacts must be done carefully and
a non-conductive ux should be used to avoid corrosion or
hygroscopic action. Do not use solder salts or acids because
they may affect the dielectric properties of insulation materials.
22. Be careful not to damage wire grommets or contact retaining
collets when inserting or extracting contacts.
23. Never try to straighten bent contacts. Straightening cannot be
done properly and the plating on contacts will very likely be
marred. This will result in a high resistance connection and will
expose the base metal to possible corrosion.
24. Do not attempt to remove inserts that are bonded or locked in
place in their shells.
25. Be certain that all components of connectors are assembled.
Each part performs a vital function and it would not be
included if it wasn't useful.
26. Each assembler of connectors should be his own inspector.
Assembly workmanship is a signicant factor in determining
the quality of multiple-contact connectors. Quality cannot be
"inspected" into connectors; it must be "built-in" during each
and every assembly operation.
27. When potting connectors be sure to apply potting only in
mated condition to assure that contacts will align properly.
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
97
STAR-LINE®
For an overview of Amphenol Industrial Connector Products
ask for Amphenol brochure SL-381. Call your local Amphenol
sales ofce or 800-678-0141 for further information. The
Industrial Overview brochure and all the product brochures
listed above can be viewed, printed and downloaded from the
Amphenol website: www.amphenol-industrial.com.
Additional Amphenol® Industrial
Connector Products
Amphe EX
The Amphe-EX™ is a new miniature explosion-proof threaded connector family from
Amphenol Industrial. The Amphe-EX™ product line offers inserts that accommodate
standard copper contacts, as well as coax and ber optic contacts, to allow power
and signal to pass through Hazardous rated areas. In addition, the Amphe-EX™
offers the availability of RJ45 and USB inserts. The Amphe-EX™ family provides
an overall smaller package than most hazardous area connectors. The rugged
AMPHE-EX™ connectors are ATEX and IECEx approved for Zone 1 (and Class
1, Div. 2) rated applications. Consult factory for certicate details. For more
information, refer to Amphenol Catalog 12-056 or visit www.amphenol-industrial.com.
Amphenol Cable Glands
Amphenol Industrial Operations, the worldwide leader of explosion proof
and hazardous environment interconnects, introduces a broad range of
explosion proof and industrial cable glands. The cable gland products
are designed to perform in the most demanding environments. Amphenol
provides a complete line of EX Zone 1 and 2 rated cable glands along with
general duty cable glands that are suitable for armored and unarmored cable.
Brass and stainless steel types are available. IP66/68; deluge; NEMA rated
products. SIRA/ATEX certied to Exd/Exe (Class I, Div. I) and CSA approved.
Reference Catalog 12-055
Cable Assemblies & Value Add Solutions
Amphenol Industrial, one of the world’s premiere interconnect solutions
providers, offers a complete array of cable assemblies and turnkey junction
box options. From standard cable harnesses, to complete ATEX and IECEx
rated junction boxes, Amphenol can provide all your value add solutions.
Amphenol can provide simple cable assemblies using any of our full line of
connectors. Also available are over-molded cable assemblies that provide a
water tight, molded solution that requires no additional strain relief hardware.
97
Amphenol
INDUSTRIAL
98
STAR-LINE®
Amphenol
INDUSTRIAL
STAR-LINE Connectors with
RADSOK® Contacts
The new RADSOK contact design
has been incorporated into the
Star-Line connector family of
connectors.
Insert arrangements with
RADSOK's are shown in this
catalog. For information on
availability of additional inserts
with RADSOK's consult Amphenol
Industrial Operations.
Amphe-Power connectors with
RADSOK sockets can handle up to 50% higher amperages than connectors
with standard contacts. Current Amphe-Power product lines support from 50A
to 500A continuous duty. RADSOK contacts are available in size 8 (69 amps),
size 4 (120 amps), and size 0 (250 amps).
RADSOK Contact Advantages:
Low contact resistance - the RADSOK contact’s multiplicity of at grid
surfaces assures the greatest possible contact area on the mating pin. This
results in longer life - reduced contact pressure yields reduced wear.
Low milli-volt drop performance - due to the intimate contact provided by
the spring force of the grid, the at contact surface and the wiping action
during insertion.
Higher current capacity with minimized temperature rise. Lower overall
contact resistance reduces heat build-up, thereby allowing higher current
capacities at given temperature limits. Connectors with RADSOK contacts
may be produced in various sizes with a variety of amperage capabilities.
Reliability under vibration and shock. System inertia is minimized by the
small package and the fact that the contact is under a spring load.
High quality, consistency and lower cost with high speed, automated
precision stamping and assembly technology
See Brochure SL-391, Amphenol Amphe-Power Connectors with RADSOK
Technology for more information on other Amphenol connector types that
incorporate RADSOK contacts.
RADSOK Contact Design:
Socket cylinder within female contact has
several equally spaced longitudinal beams
twisted into a hyperbolic shape.
As male pin is inserted, axial members in the
female half deect, imparting high current
ow across the connection with minimal
voltage loss.
The hyperbolic, stamped grid conguration
ensures a large, coaxial, face-to-face surface
area engagement.
Ideal for crimp termination applications
requiring repeated mating cycles and high
current with a low milli-volt drop.
Certain designs are available for variable
frequency drive (VFD) applications. Consult
Amphenol Industrial Operations for further
information.
Amphenol
INDUSTRIAL
Amphenol
INDUSTRIAL
99
STAR-LINE®
Amphenol Industrial
Oceanus Subsea Connectors
Amphenol Industrial Operations offers a broad range of harsh environment interconnect solutions. Our new OCEANUS
Series of Connectors are tailored to meet the rugged demands of the subsea market. The OCEANUS series consists
of 3 new product ranges: POSEIDON, AQUA POWER and SUBMARINER. The product family offers versatile, high
performance characteristics including 9,000 PSI open face pressure ratings, underwater wet mate-able connectors,
multi-pin congurations, high speed (coax and ber optic) and over-molded cable assembly options.
POSEIDON
• 500 VDC Signal and 3kv Power contacts
• Up to 9,000 PSI open face pressure rating (6,000M)
• Congurable for use with Solid and Oil –Filled Cables
• Sealing caps, overmolding, and other options available
• Solder contacts range from 22 awg through 10 awg
• High Speed Coax (50 & 75 Ώ) and Fiber Optic available
• MIL-C-24217/4-005 spec, IP68
• MIL-G-45204, Type II, Class 1 (50 microns Au)
• Intermateable/intermountable with competitive products
For more information
reference IDS-42
• 316 stainless steel, Passivated per ATSM A967
• 500 vdc Signal and 3kv Power contacts
• Up to 9,000 PSI open face pressure rating (6,000 M)
• Congurable for use with Solid and Oil –Filled Cables
• Sealing caps, overmolding (straight or 90°)
• Custom build option available
• Optional coupling nut locking set screw available
• Operating Temperature -50°C to +60°C
• Solder contacts range from 20 awg through 2 awg
• IP68 rated
For more information
reference IDS-43
• ROVs and other Wet Mateable applications
• Numerous congurations available
• 1-16 contacts
• Molded high-insulation neoprene
• Heat-treated beryllium copper sockets, gold plating, and
stainless steel bodies
• Operating Temperature -50ºC to +60ºC
• Up to 9,000 PSI open face pressure rating (6,000 M)
For more information
reference IDS-44
AQUA POWER
SUBMARINER
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, NY 13838-1395
Phone: 607-563-5011
1-800-678-0141
Fax: 607-563-5157
www.amphenol-aerospace.com
www.amphenol-industrial.com
SALES OFFICES
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
23276 South Pointe Drive, Suite 113
Laguna Hills, CA 92653
Phone: 949-855-4454
1-800-678-0141
Fax: 949-855-9115
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
2010 Corporate Ridge
McLean, VA 22101
Phone: 1-800-678-0141
For information on International
Products, a North American ofce
can be contacted:
Phone: 978-532-8800
Fax: 978-532-6800
Amphenol Industrial Operations
Amphenol Power Solutions
34190 Riviera Drive
Fraser, MI 48026
Phone: 586-294-7400
Fax: 586-294-7402
www.radsok.com
Amphenol Pcd
2 Technology Drive
Peabody, MA 01960
Phone: 978-532-8800
Fax: 978-532-6800
www.amphenolpcd.com
Amphenol Canada
20 Melford Drive
Scarborough, ON M1B 2X6
Canada
Phone: 416-291-4401
Fax: 416-292-0647
www.amphenolcanada.com
AUTHORIZED AMPHENOL
DISTRIBUTORS
Corporate Headquarters
ALPHABETICAL LISTING
APD (All Product Distributors):
Arrow Electronics Englewood, CO
800-777-2776
Avnet EMG Dallas, TX
800-332-8638
PEI Genesis Philadelphia, PA
800-523-0727
Powell Electronics Philadelphia, PA
800-235-7880
TTI Inc. Fort Worth, TX
800-225-5884
Disadvantaged/Minority Distributors:
Cherokee Nation Dist. Stilwell, OK
918-696-2777
Electro Enterprises Oklahoma City, OK
800-324-6591
JRH Electronics Marlton, NJ
800-467-9309
AMPHENOL/PYLE
INDUSTRIAL DISTRIBUTORS
Bartec-Technor ASA
Stavanger, Norway
Phone: 47 51 84 4100
Fax: 47 51 84 4103
www.bartec-technor.no
Crawford Electric Supply
10051Porter Rd.
Laporte, TX 77571
Phone: 281-417-7540
Fax: 281-470-2659
www.cescoltd.com
EC Systems, Division of Nelson
Dunn, Inc.
17707 Valley View Ave.
Cerritos, CA 90703
Phone: 1-800-635-3866
Fax: 714-523-9192
www.nelson-dunn.com
Gaffney-Kroese Supply
Piscataway, NJ 08854
Phone: 732-885-9000
Fax: 732-885-9555
E-mail: gksales@gaffney-kroese.com
www.gaffney-kroese.com
Geophysical Electrical Supply Co.
(GESCO)
Houston, TX
Phone: 713-645-5999
Fax: 713-645-4999
E-mail: duggan@gesco-e.com
www.gesco-e.com
Hillcrest Enterprises
Ashland, VA
Phone: 800-848-3106 or 804-798-8390
Fax: 804-752-7830
E-mail: cordgrip@aol.com
www.plugs.cc
ITI Marine & Oileld PTE, Ltd.
Joo Koon Crescent, Singapore
Phone: (65) 6266-6666
Fax: (65) 6266-0009
Jackson Power
Edmonton, Alberta Canada
Phone: 780-435-9275
Fax: 780-436-0308
E-mail: ljackson@jacksonpower.com
www.jacksonpower.com
National Oilwell Varco/L.S.I
12002 West Little York
Houston, TX 77041
Phone: 713-464-1393
Fax: 713-464-7731
www.nov.com/Supply_Chain/
Electrical_Products.aspx
PEI Genesis UK
George Curl Way
Southampton, SO182RZ
Phone: +44(0)2380621260
Phone: +44(0)8448716060
Fax: +44 (0)8448716070
Email: peiuk@peigenesis.con
www.peigenesis.com
Steck Connections
Mississauga, Ontario, Canada
Phone: 905-608-2444
Fax: 905-608-2895
E-mail: steck@ican.net
www.steckconnections.com
Steiner Electric
Elk Grove Village, IL
Phone: 847-228-0400
Fax: 847-228-1352
E-mail: infor@stnr.com
www.steinerelectric.com
Wholesale Electric
Houston, TX
Phone: 800-486-8563 or 713-748-6100
Fax: 713-749-8415
E-mail: donniejr@wholesaleelectric.com
www.wholesaleelectric.com
INTERNATIONAL
(Industrial Operations Ofces)
Latin America
ARGENTINA
Amphenol Argentina
Avenida Callao 930, 2nd oor Ofce B Plaza
C1023AAP Buenos Aires, Argentina
Phone: (54 11) 48 15 68 86
Fax: (54 11) 48 14 57 79
E-mail:vendas@amphenol.com.ar
BRAZIL
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo - SP, Brazil
Phone: (55-11) 3815.1003
Fax: (55-11) 3815.1629
E-mail: vendas@amphenol.com.br
MEXICO
Amphenol Mexico
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F., Mexico
Phone: (52-55) 5258.9984
Fax: (52-55) 5081.6890
E-mail: info@amphenolmexico.com
Europe
AUSTRIA & EASTERN EUROPE
Amphenol European Sales Oper.
P.O. Box 63, 3990 DB Houton
The Netherlands
Phone: 31 30 6358000
Fax: 31 30 6377899
E-mail: info@amphenol-nl.com
ENGLAND
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, United Kingdom
Phone: (44-1-227) 773200
Fax: (44-1-227) 276571
www.amphenol.co.uk
FRANCE
Amphenol Socapex
Promenade de l’Arve, BP29
Thyez 74301 948 Cedex, France
Phone: (33-4) 50892800
Fax: (33-4) 5096-1941
www.amphenol-socapex.com
FRANCE
Amphenol-Air LB
29, Voie d’Y Vois
F-00810 Blagny, France
Phone: 33-3-2422-7849
Fax: 33-3-2422-7850
www.amphenol-airlb.fr
GERMANY
Amphenol-Tuchel Elect. GmbH
August-Haeusser Strasse 10
Postfach 1110
74001 Heilbronn, Germany
Phone: (49-7131) 929 0
Fax: (49-7131) 929 414
www.amphenol-tuchel.com
GERMANY
Amphenol-Air LB
Am Kleinbahnhof 4
D-66740 Saarlouis, Germany
Phone: (49-6831) 9810-87
Fax: (49-6831) 9810-30
www.amphenol-airlb.com
ITALY
Amphenol Italia S.p.A.
Via Barbaiana 5
20020 Lainate (Milano), Italy
Phone: 39-02-932541
Fax: 39-02-93254444
E-mail: info@amphenol-it.com
BENELUX
Amphenol European Sales Operations
Amphenol Benelux BV
P. O. Box 63, 3990 DB Houten
The Netherlands
Phone: 31-30-6358000
Fax: 31-30-6377034
E-mail: info@amphenol-nl.com
SPAIN & PORTUGAL
Amphenol Iberica
Edicio “Burgosol” - Ocina No. 55
c/Comunidad de Madrid, 35-bis,
28230 Las Rozas, Madrid, Spain
Phone: 34-91-6407303
Fax: 34-91-6407307
E-mail: infor@amphenol-it.com
SWITZERLAND
Amphenol Switzerland
P.O. Box 63, 3990 DB Houton,
The Netherlands
Phone: 31 30 6358000
Fax: 31 30 6377899
E-mail: info @amphenol-nl.com
Middle East / Africa
ISRAEL
Bar-Tec Ltd.
3 Hagavish St., P.O.B. 279
Kr-Barkan Bldg., East Industrial Zone
Kfar Sava 44102, Israel
Phone: (972-9) 764.4100
Fax: (972-9) 7674324
E-mail: www.bar-tec.com
SOUTH AFRICA
Amphenol South Africa
30 Impapa Road
2196 Sandton - Chislehurston
South Africa
Tel: (27-11) 783-9517
Fax: (27-11) 783-9519
E-mail: amphenol_africa@csi.com
TURKEY
Amphenol Turkiye
Ayazaga Mah. Meydan Sk. No. 28
Beybi Giz Plaza, Kat. 26
34396 Maslak/Islanbul
Phone: 90(0212) 335 25 01
Fax: 90(0212) 335 25 00
Asia / Pacic
AUSTRALIA
Amphenol Australia Pty Ltd
2 Fiveways Blvd. Keysborough
Melbourne, Victoria 31733, Australia
Phone: 613 8796 8888
Fax: 613 8796 8801
E-mail: infor@amphenolaust.com.au
CHINA
Amphenol Shanghai Ofce
14/D, Dong Zhan Commercial Bldg.
669 Beijing Road West,
Shanghai, 200041, China
Phone: (86) 21 6267 5566
Fax: (86) 21 6272 7587
HONG KONG
Amphenol East Asia Ltd.
26/F Railway Plaza
39 Chatham Road South
Kowloon, Hong Kong
Phone: 852-9090-5325
Fax: 852-2691-1774
INDIA
Amphenol Interconnect India,
Pvt, Ltd.
105 Bhosari Industrial Area
Pune, 411 026, India
Phone: (91-20) 27120 481
Fax: (91-20) 27120 581
E-mail: sales@amphenol-in.com
JAPAN
Amphenol Japan Mil Aero & Industrial
471-1, Deba, Ritto-city
Shiga 520-3041, Japan
Phone: 81-77553-8501
Fax: 81-77551-2200
KOREA
Amphenol Daeshin
#558 SoSa, SongNae
Bucheon City, Kyungki-Do
Korea 420-130
Phone: 82-32-680-3800
Fax: 82-32-673-2507
SINGAPORE
Amphenol East Asia, Ltd.
300 Beach Road
#34-06 The Concourse
Singapore 199555
Phone: 65-6294-2128
Fax: 65-6294-3522
TAIWAN
Amphenol Taiwan
No. 116, Lane 956, Zhong Shan Rd.
Taoyuan City, Taiwan, R.O.C. 330
Phone: (886-3) 379-5677
Fax: (886-3) 360-7259
AMPHENOL CORPORATION
Amphenol Industrial
Phone: 607-563-5011
40-60 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Notice: Specications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Ofce for the latest specications. All statements, information and data given herein are believed
to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without
representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other
measures may not be required. Specications are typical and may not apply to all connectors.
HKA 4-2012