D.. AP Vishay Thick Film, Rectangular Chip Resistors for Conductive Gluing FEATURES * * * * AgPd-Terminations for conductive gluing Protective overglaze Metal glaze on high quality ceramic Compliant with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) * Excellent stability (R/R 1 % for 1000 h at 70 C) STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC D10 AP 0402 POWER RATING P70 C W LIMITING ELEMENT VOLTAGE MAX V 0.063 50 RESISTANCE TEMPERATURE RANGE COEFFICIENT TOLERANCE % ppm/K 100 200 1005 E-SERIES 1 5 100R - 10M 10R - 10M 24 + 96 24 1 5 18R - 10M 3R6 - 10M 24 + 96 24 1 5 18R - 10M 3R6 - 10M 24 + 96 24 1 5 18R - 10M 3R6 - 10M 24 + 96 24 Zero-Ohm-Resistor: Rmax < 200 m, Imax = 0.5 A 0.1 D11 AP 0603 100 200 75 1608 Zero-Ohm-Resistor: Rmax < 200 m, Imax = 0.7 A 0.125 D12 AP 0805 100 200 150 2012 Zero-Ohm-Resistor: Rmax < 200 m, Imax = 0.8 A 0.25 D25 AP 1206 100 200 200 3216 Zero-Ohm-Resistor: Rmax < 200 m, Imax = 1 A Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time. * Marking and packaging: see appropriate catalog or web pages * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER UNIT D10 AP D11 AP D12 AP D25 AP W 0.063 0.10 0.125 0.25 V 50 75 150 200 Insulation Voltage (1 min) Vpeak > 75 > 100 > 200 > 300 Thermal Resistance 1) K/W 870 550 440 220 Insulation Resistance Category Temperature Range C - 55 to + 125 (+ 155) Failure Rate h-1 0.3 * 10-9 Rated Dissipation at 70 C 3) Limiting Element Voltage 2) Weight/1000 pcs g > 0.65 109 2 5.5 10 Notes 1. Measuring conditions in acc. to EN 140401-802 2. Rated voltage: PxR 3. The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceed. www.vishay.com 1 For technical questions in Europe, contact: ff1aresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Document Number: 20038 Revision: 27-Mar-07 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay PART NUMBER AND PRODUCT DESCRIPTION D.. AP - SERIES Part Numbering: D1208058B5620FP51) D 1 2 0 8 0 5 8 B 5 6 2 0 F P 5 MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACKAGING2) SPECIAL D100402 D110603 D120805 D251206 8 = AgPd terminations for conductive glueing B = 100 ppm/K A = 200 ppm/K 0 = Jumper 3 digit value 1 digit multiplier F=1% J=5% P0 P5 PN PZ B5 BN up to 2 digits MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 0000 = Jumper Product Description: D12 AP 100 562R 1 % P5 D12 AP 100 562R 1% P5 BVxxxx MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING2) SPECIAL3) D10 AP D11 AP D12 AP D25 AP 100 ppm/K 200 ppm/K 49K9 = 49.9 k 5R1 = 5.1 0R0 = Jumper 1% 5% P0 P5 PN PZ B5 BN Customized part number is available on request Notes 1. Preferred way for ordering products is by use of the PART NUMBER. 2. Please refer to table PACKAGING, see below. 3. Detailed BV Number will appear on the Packaging Label. PACKAGING REEL MODEL TAPE WIDTH PACKAGING CODE DIAMETER PITCH PIECES/REEL 180 mm/7" 2 mm 10 000 P0 330 mm/13" 2 mm 50 000 PZ 180 mm/7" 4 mm 5000 P5 255 mm/10" 4 mm 10 000 P0 330 mm/13" 4 mm 20 000 PN BN 180 mm/7" 4 mm 5000 P5 B5 255 mm/10" 4 mm 10 000 P0 330 mm/13" 4 mm 20 000 PN BN 180 mm/7" 4 mm 5000 P5 B5 255 mm/10" 4 mm 10 000 P0 330 mm/13" 4 mm 20 000 PN PAPER1) D10 AP D11 AP D12 AP D25 AP 8 mm 8 mm 8 mm 8 mm BLISTER B5 BN Note 1. Flame treated paper for sizes D10 and D11. Regular paper for sizes D12 and D25. Document Number: 20038 Revision: 27-Mar-07 For technical questions in Europe, contact: ff1aresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com www.vishay.com 2 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay DIMENSIONS SIZE DIMENSIONS [in millimeters] INCH METRIC L W H T1 T2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 + 0.10 0603 1608 1.55 + 0.10 0.45 0.05 0.3 0.2 0.3 0.2 0805 2012 2.0 + 0.20 1.25 0.15 0.45 0.05 0.3 + 0.20 0.3 0.2 1206 3216 3.2 + 0.10 - 0.05 - 0.10 0.85 0.1 1.6 0.15 - 0.20 - 0.10 0.55 0.05 0.45 0.2 - 0.15 0.4 0.2 SOLDER PAD DIMENSIONS [in millimeters] SIZE REFLOW SOLDERING WAVE SOLDERING INCH METRIC a b l 0402 1005 0.4 0.6 0.5 a b l 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 Rated Power in % Temperature Rise in C FUNCTIONAL PERFORMANCE 90 80 0402 0603 0805 1206 70 60 120 100 80 50 60 40 40 30 20 20 10 0 0.1 0.2 0.3 Non-Linearity A3 in dB Temperature Rise 0.4 Power in Watts 120 110 100 90 80 1206 0805 0603 0402 70 60 0 - 55 0.5 - 25 0 25 50 Derating Current Noise in V/V 0 75 100 125 150 175 70 Ambient Temperature in C 100 2 040 10 3 060 5 080 6 120 50 1 40 30 20 10 0.1 100 Non-Linearity www.vishay.com 3 1K 10K 100K 1M 10M Resistance Value in 100 1K 10K Current Noise For technical questions in Europe, contact: ff1aresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com 100K 1M 10M Resistance Value in Document Number: 20038 Revision: 27-Mar-07 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay Pulse Load Pmax (W) Single Pulse 1000 1206 0805 0603 0402 100 10 1 0.1 0.01-6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse load, single pulse; applicable if P 0 and n 1000 and U Umax; for permissible resistance change equivalent to 8000 h operation Continuous Pulse Load Pmax (W) Continuous Pulse 100 1206 0805 10 0603 0402 1 0.10 0.01 -6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse load, continuous pulses; applicable if P P (amb) and U Umax; for permissible resistance change equivalent to 8000 h operation Pulse Voltage Umax (V) Pulse Voltage 1400 1300 1200 1100 1000 900 800 1206 700 600 500 0805 400 300 0603 200 100 0402 0 -6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse voltage, single and continuous pulses; applicable if P Pmax; for permissible resistance change equivalent to 8000 h operation Document Number: 20038 Revision: 27-Mar-07 For technical questions in Europe, contact: ff1aresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com www.vishay.com 4 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing 0.. 120 120 80 AP P A P 140 100 D1 .. 12 .A P .A 1. D1 D D2 5. 140 Temperature rise in u C Vishay 60 40 100 u 40 80 0.4 0.3 0.2 0.1 C 80 60 C C 0 10 40 20 20 0 0 C 0 C 0 14 20 0 40 60 80 100 120 140 160 180 Film temperature s inC 0.01 t= 0 10 0.1 0h 00 0h 00 0h 0 h 0 1 0 5 000 2 0.01 Resistance change [R/R] in % after 1000h R/R (t) = f [R/R (t = 1000 h)] Parameter: time 1 0K 1 M 0.1 1 0M R/R [t = 1000 h] = f [s] Parameter: resistance value h 00 10 1 10 1 Resistance change R/R % 0.1 1 20 0.01 40 60 80 100 120 140 160 180 Film temperature s inC 120 u = [C] Stability nomogram typical values (for handling see general explanations) 100 C 0 =2 u 80 =4 60 0.25 W C 0 u C 0 u =6 40 0.125 W =8 u C 0 20 0.0625 W 00 u 2 C 60 Load in W 1 =2 12 u = f [P] Parameter: size 0.5 C 0 u = f [s] Parameter: u 3 5 7 10 2 3 5 7 100 2 3 5 7 60 80 number of mounted resistors [pcs] Power rating as a function of packaging density (guideline) www.vishay.com 5 For technical questions in Europe, contact: ff1aresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com 100 =1 C 20 u 120 C =1 140 surface temperature s [C] Document Number: 20038 Revision: 27-Mar-07 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay TEST PROCEDURES AND REQUIREMENTS EN 60115-1 REQUIREMENTS PERMISSIBLE CHANGE (R/R) TEST (clause) STABILITY CLASS 1 OR BETTER CONDITIONS OF TEST stability for product types: D..AP D10 AP D11 AP D12 AP D25 AP 100 to 10 M 18 to 10 M 1% 1% Resistance (4.5) - Endurance at 70 C (4.25.1) U = (P70 x R) U = Umax; whichever is less severe 1.5 h on; 0.5 h off; 70 C; 1000 h 1.0 % Endurance at upper category temperature (4.25.3) UCT = 125 C; 1000 h 1.0 % Overload (4.13) U = 2.5 x (P70 x R) 2 x Umax; Duration: according the style 0.25 % Rapid change of temperature (4.19) Damp heat, steady state (4.24) 30 min. at LCT = - 55 C 30 min. at UCT = 125 C; 5 cycles (40 2) C; 56 days; (93 3) % RH 0.25 % 1.0 % APPLICABLE SPECIFICATIONS * EN 60115-1 Generic Specification * EN 140400 Sectional Specification * EN 140401-802 Detail Specification * IEC 60068-2-X Variety of environmental test procedures * IEC 60286-3 Packaging of SMD components Document Number: 20038 Revision: 27-Mar-07 For technical questions in Europe, contact: ff1aresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com www.vishay.com 6 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1