D2512068B8200FP5 - Vishay Presicion Group

www.vishay.com For technical questions in Europe, contact: ff1aresistors@vishay.com Document Number: 20038

1 For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Revision: 27-Mar-07

D.. AP

Vishay

Thick Film, Rectangular Chip Resistors

for Conductive Gluing

FEATURES

•AgPd-Terminations for conductive gluing

•Protective overglaze

•Metal glaze on high quality ceramic

•Compliant with "Restriction of the use of Hazardous

Substances" (RoHS) directive 2002/95/EC (issue 2004)

•Excellent stability (ΔR/R ≤ 1 % for 1000 h at 70 °C)

Notes

•These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over

operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time.

•Marking and packaging: see appropriate catalog or web pages

•Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material

Notes

1. Measuring conditions in acc. to EN 140401-802

2. Rated voltage:

3. The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the

printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceed.

STANDARD ELECTRICAL SPECIFICATIONS

MODEL

SIZE POWER RATING

P70 °C

LIMITING

ELEMENT

VOLTAGE

MAX

V≅

TEMPERATURE

COEFFICIENT

ppm/K

TOLERANCE

RESISTANCE

RANGE

ΩE-SERIES

INCH METRIC

D10 AP 0402 1005

0.063 50 ± 100

± 200

± 1

± 5

100R - 10M

10R - 10M

24 + 96

Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 0.5 A

D11 AP 0603 1608

0.1 75 ± 100

± 200

± 1

± 5

18R - 10M

3R6 - 10M

24 + 96

Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 0.7 A

D12 AP 0805 2012

0.125 150 ± 100

± 200

± 1

± 5

18R - 10M

3R6 - 10M

24 + 96

Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 0.8 A

D25 AP 1206 3216

0.25 200 ± 100

± 200

± 1

± 5

18R - 10M

3R6 - 10M

24 + 96

Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 1 A

TECHNICAL SPECIFICATIONS

PARAMETER UNIT D10 AP D11 AP D12 AP D25 AP

Rated Dissipation at 70 °C 3) W 0.063 0.10 0.125 0.25

Limiting Element Voltage 2) V≅50 75 150 200

Insulation Voltage (1 min) Vpeak > 75 > 100 > 200 > 300

Thermal Resistance 1) K/W ≤ 870 ≤ 550 ≤ 440 ≤ 220

Insulation Resistance Ω> 109

Category Temperature Range °C - 55 to + 125 (+ 155)

Failure Rate h-1 0.3 • 10-9

Weight/1000 pcs g 0.65 2 5.5 10

PxR

Document Number: 20038 For technical questions in Europe, contact: ff1aresistors@vishay.com www.vishay.com

Revision: 27-Mar-07 For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com 2

D.. AP

Thick Film, Rectangular Chip Resistors

for Conductive Gluing Vishay

Notes

1. Preferred way for ordering products is by use of the PART NUMBER.

2. Please refer to table PACKAGING, see below.

3. Detailed BV Number will appear on the Packaging Label.

Note

1. Flame treated paper for sizes D10 and D11. Regular paper for sizes D12 and D25.

PART NUMBER AND PRODUCT DESCRIPTION D.. AP - SERIES

Part Numbering: D1208058B5620FP51)

MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PA CK A G I NG 2) SPECIAL

D100402

D110603

D120805

D251206

8 = AgPd terminations

for conductive glueing

B = ± 100 ppm/K

A = ± 200 ppm/K

0 = Jumper

3 digit value

1 digit multiplier

MULTIPLIER

7 = *10-3

8 = *10-2

9 = *10-1

0 = *100

1 = *101

2 = *102

3 = *103

4 = *104

5 = *105

6 = *106

0000 = Jumper

F = ± 1 %

J = ± 5 %

up to 2 digits

Product Description: D12 AP 100 562R 1 % P5

D12 AP 100 562R 1 % P5 BVxxxx

MODEL TCR RESISTANCE VALUE TOLERANCE

PA C K AG I N G

SPECIAL3)

D10 AP

D11 AP

D12 AP

D25 AP

± 100 ppm/K

± 200 ppm/K

49K9 = 49.9 kΩ

5R1 = 5.1 Ω

0R0 = Jumper

± 1 %

± 5 %

Customized

part number is

available on

request

PACKAGING

MODEL

REEL

TAPE WIDTH DIAMETER PITCH PIECES/REEL PACKAGING CODE

PAPER1) BLISTER

D10 AP 8 mm

180 mm/7" 2 mm 10 000 P0

330 mm/13" 2 mm 50 000

D11 AP 8 mm

180 mm/7" 4 mm 5000 P5 B5

255 mm/10" 4 mm 10 000 P0

330 mm/13" 4 mm 20 000 PN BN

D12 AP 8 mm

180 mm/7" 4 mm 5000 P5 B5

255 mm/10" 4 mm 10 000 P0

330 mm/13" 4 mm 20 000 PN BN

D25 AP 8 mm

180 mm/7" 4 mm 5000 P5 B5

255 mm/10" 4 mm 10 000 P0

330 mm/13" 4 mm 20 000 PN BN

5PF0265B8508021D

www.vishay.com For technical questions in Europe, contact: ff1aresistors@vishay.com Document Number: 20038

3 For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Revision: 27-Mar-07

D.. AP

Vishay Thick Film, Rectangular Chip Resistors

for Conductive Gluing

DIMENSIONS

FUNCTIONAL PERFORMANCE

SIZE DIMENSIONS [in millimeters]

INCH METRIC

LW H T1T2

0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2

+ 0.10

- 0.15

0603 1608 1.55

+ 0.10

- 0.05

0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2

0805 2012 2.0

+ 0.20

- 0.10

1.25 ± 0.15

0.45 ± 0.05 0.3

+ 0.20

- 0.10

0.3 ± 0.2

1206 3216 3.2

+ 0.10

- 0.20

1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2

SIZE

SOLDER PAD DIMENSIONS

[in millimeters]

REFLOW SOLDERING WAVE SOLDERING

INCH METRIC a b l a b l

0402 1005 0.4 0.6 0.5

0603 1608 0.5 0.9 1.0 0.9 0.9 1.0

0805 2012 0.7 1.3 1.2 0.9 1.3 1.3

1206 3216 0.9 1.7 2.0 1.1 1.7 2.3

0402 0603 0805 1206

0 0 0.1 0.2 0.3 0.4 0.5

Power in W atts

Te mperature Rise in °C

Temperature Rise

100 1K 10K 100K 1M 10M

Non-Linearity

100

Resistance V alue in Ω

Non-Linearity A 3 in dB

1206

0805

0603

0402

120

110

Derating

- 55 - 25 0 2 55 0 75 100 125 150 175

120

100

Ambient Te mperature in °C 70

R ated Power in %

100 1K 10K 100K 1M 10M

100

0.1

Current Noise

Resistance V alue in Ω

Current Noise in µ V/ V

0402

0603

0805

1206

Document Number: 20038 For technical questions in Europe, contact: ff1aresistors@vishay.com www.vishay.com

Revision: 27-Mar-07 For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com 4

D.. AP

Thick Film, Rectangular Chip Resistors

for Conductive Gluing Vishay

1000

100

0.1

0.01

-6

-5

-4

-3

-2

-1

1 10

Single Pulse

Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and U ≤ Umax;

for permissible resistance change equivalent to 8000 h operation

Pulse Duration ti (s)

Pulse Load P

max

(W)

1206

0805

0603

0402

Continuous Pulse

Continuous Pulse Load P

max

(W)

100

0.10

0.01

10-6 10-5 10-4 10-3 10-2 10-1 1 10

1206

0805

0603

0402

Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax;

for permissible resistance change equivalent to 8000 h operation

Pulse Duration ti (s)

1206

0805

0603

0402

200

10-6 10-5 10-4 10-3 10-2 10-1 110

Pulse Voltage

Maximum pulse voltage, single and continuous pulses; applicable if

P ≤ Pmax; for permissible resistance change equivalent to 8000 h operation

Pulse Duration ti (s)

400

600

800

1000

1200

1400

Pulse Voltage

max (V)

1206

0805

0603

0402

100

300

500

700

900

1100

1300

www.vishay.com For technical questions in Europe, contact: ff1aresistors@vishay.com Document Number: 20038

5 For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Revision: 27-Mar-07

D.. AP

Vishay Thick Film, Rectangular Chip Resistors

for Conductive Gluing

25.. AP

D12.. AP

D 1 0.. AP

1.. AP

≤ 10K

≤ 1

≤ 10

140

120

100

ϑü

= f [ ϑs

]

Parameter: ϑu

20 40 60 80 100 120 140 160 180

Load in W

0.01

0.1

20 40 60 80 100 120 140 160 180

Film temperature ϑs

in °C

0.01

0.1

10 1 0.1 0.01

Resistance change Δ R/R %

Δ R/R (t) = f [ ΔR/R (t = 1000 h)]

Parameter: time

0.5 0.4 0.3 0.2 0.1 0

ϑü

= f [P ]

Parameter: size

140

120

100

Film temperature ϑs in °C

Stability nomogram typical values (for handling see general explanations)

Resistance chang e

[ ∆R/R] in % after 1000h Te mperature rise in ϑü

°C

ϑü

= 20 °C

40 °C

60 °C

80 °C

100 °C

120 °C

140 °C

= 1

0 0 0

0 h

1 0

0 0 0 h

0 0 0

2 0 0

0 h

1 0 0

0 h

Δ R/R [t = 1000 h] = f [ ϑs]

Parameter: resistance value

0.25 W

0.125 W

0.0625 W

120

100

12 3 5 7 10 2 3 5 7 100 2 3 5 7 60 80 100 120 140

surface temperature ϑs [ °C]

number of mounted resistors [pcs]

Power rating as a function of packaging density (guideline)

= 120 °C

= 100 °C

= 80 °C

= 60 °C

= 40 °C

= 20 °C

[

°C

]

Document Number: 20038 For technical questions in Europe, contact: ff1aresistors@vishay.com www.vishay.com

Revision: 27-Mar-07 For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com 6

D.. AP

Thick Film, Rectangular Chip Resistors

for Conductive Gluing Vishay

TEST PROCEDURES AND REQUIREMENTS

EN 60115-1

TEST

(clause) CONDITIONS OF TEST

REQUIREMENTS PERMISSIBLE

CHANGE (ΔR/R)

STABILITY CLASS 1 OR BETTER

D10 AP

D11 AP

D12 AP

D25 AP

stability for product types: 100 Ω to 10 MΩ18 Ω to 10 MΩ

D..AP

Resistance (4.5) -± 1 % ± 1 %

Endurance at 70 °C (4.25.1)

U = √(P70 x R)

U = Umax; whichever is less severe

1.5 h on; 0.5 h off; 70 °C; 1000 h

± 1.0 %

Endurance at upper category

temperature (4.25.3) UCT = 125 °C; 1000 h ± 1.0 %

Overload (4.13)

U = 2.5 x √(P70 x R)

≤ 2 x Umax;

Duration: according the style

± 0.25 %

Rapid change of temperature (4.19) 30 min. at LCT = - 55 °C

30 min. at UCT = 125 °C; 5 cycles ± 0.25 %

Damp heat, steady state (4.24) (40 ± 2) °C; 56 days;

(93 ± 3) % RH ± 1.0 %

APPLICABLE SPECIFICATIONS

• EN 60115-1 Generic Specification

• EN 140400 Sectional Specification

• EN 140401-802 Detail Specification

• IEC 60068-2-X Variety of environmental test procedures

• IEC 60286-3 Packaging of SMD components

Legal Disclaimer Notice

Vishay

Document Number: 91000 www.vishay.com

Revision: 08-Apr-05 1

Notice

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,

or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's

terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express

or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness

for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.

Customers using or selling these products for use in such applications do so at their own risk and agree to fully

indemnify Vishay for any damages resulting from such improper use or sale.