1
3
Notice for TAIYO YUDEN products 
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called TAIYO YUDENs official sales channel).
It is only applicable to the products purchased from any of TAIYO YUDEN s ofcial sales channel.
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and For-
eign Trade Control Law of Japan, U.S. Export Administration Regulations, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
1
3
Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourspecication.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourWebsite(http://www.ty-top.com/).
63
INDUCTORS
STANDARD INDUCTORS
󲹭
󲺚󲺢󲺙󲺡󲺖󲺙󲺎󲺦󲺒󲺟󲹭󲺐󲺕󲺖󲺝󲹭󲺖󲺛󲺑󲺢󲺐󲺡󲺜󲺟󲺠󲹭󲹵󲺙󲺘󲹭󲺠󲺒󲺟󲺖󲺒󲺠󲹶󲹭
󲹭
󳓵󲺝󲺎󲺟󲺡󲺠󲹭󲺛󲺢󲺚󲺏󲺒󲺟󲹭
󲹭
󲺙󲹭 󲺘󲹭 󳔈󲹭 󲹭 󲹾󲹭 󲺃󲹭 󲹽󲹭 󲺅󲹭 󲹭 󳔈󲹭 󲺟󲹭 󲹾󲹭 󲹽󲹭 󲹭 󲺚󲹭 󳞪 󲺡 󳔈 󳔈󳞺󲺏󲺹󲺮󲺻󲺸󲹭󲻀󲺽󲺮󲺰󲺲󲹭
󳏀󲹭 󲹭 󳏁󲹭 󲹭 󲹭 󳏂󲹭 󲹭 󳏃 󳏄󲹭 󳏅 󲹭
󲹭
󳏀󲺠󲺲󲺿󲺶󲺲󲻀󲹭󲺻󲺮󲺺󲺲󲹭
󲺐󲺼󲺱󲺲󲹭 󲺠󲺲󲺿󲺶󲺲󲻀󲹭󲺻󲺮󲺺󲺲󲹭
󲺙󲺘󳔈󲹭 󲺚󲻂󲺹󲻁󲺶󲺹󲺮󲻆󲺲󲺿󲹭󲺰󲺵󲺶󲺽󲹭󲺶󲺻󲺱󲻂󲺰󲻁󲺼󲺿󲹭
󲹭
󳏁󲺑󲺶󲺺󲺲󲺻󲻀󲺶󲺼󲺻󲻀󳞥󲺙󲼃󲺤󳞦󲹭
󲺐󲺼󲺱󲺲󲹭 󲺡󲻆󲺽󲺲󳞥󲺶󲺻󲺰󲺵󳞦󲹭 󲺑󲺶󲺺󲺲󲺻󲻀󲺶󲺼󲺻󲻀󲹭
󳞥󲺙󲼃󲺤󳞦󳟘󲺺󲺺󳟚󲹭
󲹾󲹽󲹽󲺂󲹭 󲹾󲹽󲹽󲺂󳞥󲹽󲺁󲹽󲹿󳞦󲹭 󲹾󲹻󲹽󲼃󲹽󲹻󲺂󲹭
󲹾󲺃󲹽󲺅󲹭 󲹾󲺃󲹽󲺅󳞥󲹽󲺃󲹽󲺀󳞦󲹭 󲹾󲹻󲺃󲼃󲹽󲹻󲺅󲹭
󲹿󲹾󲹿󲺂󲹭 󲹿󲹾󲹿󲺂󳞥󲹽󲺅󲹽󲺂󳞦󲹭 󲹿󲹻󲹽󲼃󲹾󲹻󲹿󲺂󲹭
󲹭
󲹭
󳏂󲺛󲺼󲺺󲺶󲺻󲺮󲺹󲹭󲺶󲺻󲺱󲻂󲺰󲻁󲺮󲺻󲺰󲺲󲹭
󲺐󲺼󲺱󲺲
󳞥󲺲󲻅󲺮󲺺󲺽󲺹󲺲󳞦󲹭 󲺛󲺼󲺺󲺶󲺻󲺮󲺹󲹭󲺶󲺻󲺱󲻂󲺰󲻁󲺮󲺻󲺰󲺲󳟘󳁼󲺕󳟚󲹭
󲺁󲺄󲺛󲹭 󲹽󲹻󲹽󲺁󲺄󲹭
󲺟󲹾󲹽󲹭 󲹽󲹻󲹾󲹭
󲹾󲺟󲹽󲹭 󲹾󲹻󲹽󲹭
󲹾󲹽󲹽󲹭 󲹾󲹽󲹭
󳆽󲺟󳞺󲺑󲺲󲺰󲺶󲺺󲺮󲺹󲹭󲺽󲺼󲺶󲺻󲻁󲹭
󳆽󲺛󳞺󲹽󲹻󲹽󳞥󲺻󲺕󲹭󲻁󲻆󲺽󲺲󳞦󲹭
󲹭
󳏃󲺖󲺻󲺱󲻂󲺰󲻁󲺮󲺻󲺰󲺲󲹭󲻁󲺼󲺹󲺲󲺿󲺮󲺻󲺰󲺲󲹭
󲺐󲺼󲺱󲺲󲹭 󲺖󲺻󲺱󲻂󲺰󲻁󲺮󲺻󲺰󲺲󲹭󲻁󲺼󲺹󲺲󲺿󲺮󲺻󲺰󲺲󲹭
󲺘󲹭 󲻝󲹾󲹽󳞣󲹭
󲺚󲹭 󲻝󲹿󲹽󳞣󲹭
󲹭
󳏄󲺝󲺮󲺰󲺸󲺮󲺴󲺶󲺻󲺴󲹭
󲺐󲺼󲺱󲺲󲹭 󲺝󲺮󲺰󲺸󲺮󲺴󲺶󲺻󲺴󲹭
󳞪󲺡󲹭 󲺡󲺮󲺽󲺶󲺻󲺴󲹭
󲹭
󳏅󲺖󲺻󲻁󲺲󲺿󲺻󲺮󲺹󲹭󲺰󲺼󲺱󲺲󲹭
󲺐󲺼󲺱󲺲󲹭 󲺖󲺻󲻁󲺲󲺿󲺻󲺮󲺹󲹭󲺰󲺼󲺱󲺲󲹭
󳔈󲹭 󲺠󲻁󲺮󲺻󲺱󲺮󲺿󲺱󲹭
󲹭
󲹭
󲹭
󳓵󲺠󲺡󲺎󲺛󲺑󲺎󲺟󲺑󲹭󲺒󲺥󲺡󲺒󲺟󲺛󲺎󲺙󲹭󲺑󲺖󲺚󲺒󲺛󲺠󲺖󲺜󲺛󲺠󲹭󲹼󲹭󲺠󲺡󲺎󲺛󲺑󲺎󲺟󲺑󲹭󲺞󲺢󲺎󲺛󲺡󲺖󲺡󲺦󲹭
󲹭
󲹭
󲺡󲻆󲺽󲺲󲹭 󲺙󲹭 󲺤󲹭 󲺡󲹭 󲺲󲹭 󲺠󲻁󲺮󲺻󲺱󲺮󲺿󲺱󲹭󲺾󲻂󲺮󲺻󲻁󲺶󲻁󲻆󲹭󲺨󲺽󲺰󲻀󲺪󲹭
󲺝󲺮󲺽󲺲󲺿󲹭󲻁󲺮󲺽󲺲󲹭 󲺒󲺺󲺯󲺼󲻀󲻀󲺲󲺱󲹭󲻁󲺮󲺽󲺲󲹭
󲺙󲺘󲹭󲹾󲹽󲹽󲺂
󳞥󲹽󲺁󲹽󲹿󳞦󲹭
󲹾󲹻󲹽󲹽󲻝󲹽󲹻󲹽󲺂󲹭
󳞥󲹽󲹻󲹽󲺀󲺆󲻝󲹽󲹻󲹽󲹽󲹿󳞦󲹭
󲹽󲹻󲺂󲹽󲻝󲹽󲹻󲹽󲺂󲹭
󳞥󲹽󲹻󲹽󲹿󲹽󲻝󲹽󲹻󲹽󲹽󲹿󳞦󲹭
󲹽󲹻󲺂󲹽󲻝󲹽󲹻󲹽󲺂󲹭
󳞥󲹽󲹻󲹽󲹿󲹽󲻝󲹽󲹻󲹽󲹽󲹿󳞦󲹭
󲹽󲹻󲹿󲺂󲻝󲹽󲹻󲹾󲹽󲹭
󳞥󲹽󲹻󲹽󲹾󲹽󲻝󲹽󲹻󲹽󲹽󲺁󳞦󲹭 󲹾󲹽󲹽󲹽󲹽󲹭 󳞪󲹭
󲺙󲺘󲹭󲹾󲺃󲹽󲺅
󳞥󲹽󲺃󲹽󲺀󳞦󲹭
󲹾󲹻󲺃󲻝󲹽󲹻󲹾󲺂󲹭
󳞥󲹽󲹻󲹽󲺃󲺀󲻝󲹽󲹻󲹽󲹽󲺃󳞦󲹭
󲹽󲹻󲺅󲻝󲹽󲹻󲹾󲺂󲹭
󳞥󲹽󲹻󲹽󲺀󲹾󲻝󲹽󲹻󲹽󲹽󲺃󳞦󲹭
󲹽󲹻󲺅󲻝󲹽󲹻󲹾󲺂󲹭
󳞥󲹽󲹻󲹽󲺀󲹾󲻝󲹽󲹻󲹽󲹽󲺃󳞦󲹭
󲹽󲹻󲺀󲻝󲹽󲹻󲹿󲹭
󳞥󲹽󲹻󲹽󲹾󲹿󲻝󲹽󲹻󲹽󲹽󲺅󳞦󲹭 󲺁󲹽󲹽󲹽󲹭 󳞪󲹭
󲺙󲺘󲹭󲹿󲹾󲹿󲺂
󳞥󲹽󲺅󲹽󲺂󳞦󲹭
󲹿󲹻󲹽󳞨󲹽󲹻󲺀󲹼󳞪󲹽󲹻󲹾󲹭
󳞥󲹽󲹻󲹽󲺄󲺆󳞨󲹽󲹻󲹽󲹾󲹿󲹼󳞪󲹽󲹻󲹽󲹽󲺁󳞦󲹭
󲹾󲹻󲹿󲺂󲻝󲹽󲹻󲹿󲹭
󳞥󲹽󲹻󲹽󲺁󲺆󲻝󲹽󲹻󲹽󲹽󲺅󳞦󲹭
󲹽󲹻󲺅󲺂󲻝󲹽󲹻󲹿󲹭
󳞥󲹽󲹻󲹽󲺀󲺀󲻝󲹽󲹻󲹽󲹽󲺅󳞦󲹭
󲹽󲹻󲺂󲻝󲹽󲹻󲺀󲹭
󳞥󲹽󲹻󲹽󲹿󲹽󲻝󲹽󲹻󲹽󲹾󲹿󳞦󲹭 󲺁󲹽󲹽󲹽󲹭 󳞪󲹭
󲹿󲹻󲹽󳞨󲹽󲹻󲺀󲹼󳞪󲹽󲹻󲹾󲹭
󳞥󲹽󲹻󲹽󲺄󲺆󳞨󲹽󲹻󲹽󲹾󲹿󲹼󳞪󲹽󲹻󲹽󲹽󲺁󳞦󲹭
󲹾󲹻󲹿󲺂󲻝󲹽󲹻󲹿󲹭
󳞥󲹽󲹻󲹽󲺁󲺆󲻝󲹽󲹻󲹽󲹽󲺅󳞦󲹭
󲹾󲹻󲹿󲺂󲻝󲹽󲹻󲹿󲹭
󳞥󲹽󲹻󲹽󲺁󲺆󲻝󲹽󲹻󲹽󲹽󲺅󳞦󲹭
󲹽󲹻󲺂󲻝󲹽󲹻󲺀󲹭
󳞥󲹽󲹻󲹽󲹿󲹽󲻝󲹽󲹻󲹽󲹾󲹿󳞦󲹭 󳞪󲹭 󲹿󲹽󲹽󲹽󲹭
󲺢󲺻󲺶󲻁󳞷󲺺󲺺󳞥󲺶󲺻󲺰󲺵󳞦󲹭
󲹭
󲹭
MULTILAYER CHIP INDUCTORS(LK SERIES)
REFLOWWAVE*
Except for LK1005
1
3
Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourspecication.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourWebsite(http://www.ty-top.com/).
64
INDUCTORS
STANDARD INDUCTORS
PARTS NUMBER
LK1005
LK 1005 R12[]-T RoHS 0.12 ±10%,±20 10 180 0.59 25 25 0.50 ±0.05
LK 1005 R15[]-T RoHS 0.15 ±10%,±20 10 165 0.63 25 25 0.50 ±0.05
LK 1005 R18[]-T RoHS 0.18 ±10%,±20 10 150 0.76 25 25 0.50 ±0.05
LK 1005 R22[]-T RoHS 0.22 ±10%,±20 10 135 0.79 25 25 0.50 ±0.05
LK 1005 R27[]-T RoHS 0.27 ±10%,±20 10 120 0.91 25 25 0.50 ±0.05
LK 1005 R33[]-T RoHS 0.33 ±10%,±20 10 105 1.05 25 25 0.50 ±0.05
LK 1005 R39[]-T RoHS 0.39 ±10%,±20 20 85 0.41 20 10 0.50 ±0.05
LK 1005 R47[]-T RoHS 0.47 ±10%,±20 20 80 0.42 20 10 0.50 ±0.05
LK 1005 R56[]-T RoHS 0.56 ±10%,±20 20 75 0.47 20 10 0.50 ±0.05
LK 1005 R68[]-T RoHS 0.68 ±10%,±20 20 70 0.55 20 10 0.50 ±0.05
LK 1005 R82[]-T RoHS 0.82 ±10%,±20 20 65 0.59 20 10 0.50 ±0.05
LK 1005 1R0[]-T RoHS 1.0 ±10%,±20% 20 60 0.64 20 10 0.50 ±0.05
LK 1005 1R2[]-T RoHS 1.2 ±10%,±20% 20 55 0.79 20 10 0.50 ±0.05
LK 1005 1R5[]-T RoHS 1.5 ±10%,±20% 20 50 0.95 20 10 0.50 ±0.05
LK 1005 1R8[]-T RoHS 1.8 ±10%,±20% 20 45 1.16 20 10 0.50 ±0.05
LK 1005 2R2[]-T RoHS 2.2 ±10%,±20% 20 40 1.15 20 10 0.50 ±0.05
※ [] mark indicates the Inductance tolerance code.
LK1608
LK 1608 47NM-T RoHS 0.047 ±20% 10 260 0.20 150 50 0.80 ±0.15
LK 1608 68NM-T RoHS 0.068 ±20% 10 250 0.30 150 50 0.80 ±0.15
LK 1608 82NM-T RoHS 0.082 ±20% 10 245 0.30 150 50 0.80 ±0.15
LK 1608 R10[]-T RoHS 0.10 ±10%,±20 15 240 0.35 150 25 0.80 ±0.15
LK 1608 R12[]-T RoHS 0.12 ±10%,±20 15 205 0.40 150 25 0.80 ±0.15
LK 1608 R15[]-T RoHS 0.15 ±10%,±20 15 180 0.45 150 25 0.80 ±0.15
LK 1608 R18[]-T RoHS 0.18 ±10%,±20 15 165 0.50 100 25 0.80 ±0.15
LK 1608 R22[]-T RoHS 0.22 ±10%,±20 15 150 0.55 100 25 0.80 ±0.15
LK 1608 R27[]-T RoHS 0.27 ±10%,±20 15 136 0.80 100 25 0.80 ±0.15
LK 1608 R33[]-T RoHS 0.33 ±10%,±20 15 125 0.75 80 25 0.80 ±0.15
LK 1608 R39[]-T RoHS 0.39 ±10%,±20 15 110 0.85 80 25 0.80 ±0.15
LK 1608 R47[]-T RoHS 0.47 ±10%,±20 15 105 0.95 80 25 0.80 ±0.15
LK 1608 R56[]-T RoHS 0.56 ±10%,±20 15 95 1.05 80 25 0.80 ±0.15
LK 1608 R68[]-T RoHS 0.68 ±10%,±20 15 80 1.25 40 25 0.80 ±0.15
LK 1608 R82[]-T RoHS 0.82 ±10%,±20 15 75 1.40 40 25 0.80 ±0.15
LK 1608 1R0[]-T RoHS 1.0 ±10%,±20% 35 70 0.60 40 10 0.80 ±0.15
LK 1608 1R2[]-T RoHS 1.2 ±10%,±20% 35 60 0.65 40 10 0.80 ±0.15
LK 1608 1R5[]-T RoHS 1.5 ±10%,±20% 35 55 0.70 40 10 0.80 ±0.15
LK 1608 1R8[]-T RoHS 1.8 ±10%,±20% 35 50 0.95 40 10 0.80 ±0.15
LK 1608 2R2[]-T RoHS 2.2 ±10%,±20% 35 45 1.00 30 10 0.80 ±0.15
LK 1608 2R7[]-T RoHS 2.7 ±10%,±20% 35 40 1.15 30 10 0.80 ±0.15
LK 1608 3R3[]-T RoHS 3.3 ±10%,±20% 35 38 1.30 30 10 0.80 ±0.15
LK 1608 3R9[]-T RoHS 3.9 ±10%,±20% 35 36 1.50 30 10 0.80 ±0.15
LK 1608 4R7[]-T RoHS 4.7 ±10%,±20% 35 33 1.60 30 10 0.80 ±0.15
LK 1608 5R6[]-T RoHS 5.6 ±10%,±20% 35 22 1.10 10 4 0.80 ±0.15
LK 1608 6R8[]-T RoHS 6.8 ±10%,±20% 35 20 1.30 10 4 0.80 ±0.15
LK 1608 8R2[]-T RoHS 8.2 ±10%,±20% 35 18 1.50 10 4 0.80 ±0.15
LK 1608 100[]-T RoHS 10 ±10%,±20% 35 17 1.70 10 2 0.80 ±0.15
LK 1608 120[]-T RoHS 12 ±10%,±20% 35 15 1.80 10 2 0.80 ±0.15
LK 1608 150M-T RoHS 15 ±20% 20 14 1.50 1 1 0.80 ±0.15
LK 1608 180M-T RoHS 18 ±20% 20 13 1.60 1 1 0.80 ±0.15
LK 1608 220M-T RoHS 22 ±20% 20 11 1.70 1 1 0.80 ±0.15
LK 1608 270M-T RoHS 27 ±20% 20 10 1.80 1 1 0.80 ±0.15
LK 1608 330M-T RoHS 33 ±20% 20 9 2.20 1 1 0.80 ±0.15
※ [] mark indicates the Inductance tolerance code.
DC Resistance
[Ω](max.)
Rated current
[mA](max.)
Measuring
frequency
[MHz]
Thickness
[mm]
Q
(min.)
Self-resonant
frequency
[MHz](min.)
Parts number EHS Nominal inductance
[μH] Inductance tolerance
Parts number EHS Nominal inductance
[μH] Inductance tolerance Rated current
[mA](max.)
Q
(min.)
Measuring
frequency
[MHz]
Thickness
[mm]
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](max.)
1
3
Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourspecication.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourWebsite(http://www.ty-top.com/).
65
INDUCTORS
STANDARD INDUCTORS
PARTS NUMBER
LK2125
LK 2125 47NM-T RoHS 0.047 ±20% 15 320 0.10 300 50 0.85 ±0.2
LK 2125 68NM-T RoHS 0.068 ±20% 15 280 0.15 300 50 0.85 ±0.2
LK 2125 82NM-T RoHS 0.082 ±20% 15 255 0.20 300 50 0.85 ±0.2
LK 2125 R10[]-T RoHS 0.10 ±10%,±20 20 235 0.15 270 25 0.85 ±0.2
LK 2125 R12[]-T RoHS 0.12 ±10%,±20 20 220 0.20 270 25 0.85 ±0.2
LK 2125 R15[]-T RoHS 0.15 ±10%,±20 20 200 0.20 270 25 0.85 ±0.2
LK 2125 R18[]-T RoHS 0.18 ±10%,±20 20 185 0.25 270 25 0.85 ±0.2
LK 2125 R22[]-T RoHS 0.22 ±10%,±20 20 170 0.30 250 25 0.85 ±0.2
LK 2125 R27[]-T RoHS 0.27 ±10%,±20 20 150 0.35 250 25 0.85 ±0.2
LK 2125 R33[]-T RoHS 0.33 ±10%,±20 20 145 0.40 250 25 0.85 ±0.2
LK 2125 R39[]-T RoHS 0.39 ±10%,±20 25 135 0.45 200 25 0.85 ±0.2
LK 2125 R47[]-T RoHS 0.47 ±10%,±20 25 125 0.50 200 25 1.25 ±0.2
LK 2125 R56[]-T RoHS 0.56 ±10%,±20 25 115 0.55 150 25 1.25 ±0.2
LK 2125 R68[]-T RoHS 0.68 ±10%,±20 25 105 0.60 150 25 1.25 ±0.2
LK 2125 R82[]-T RoHS 0.82 ±10%,±20 25 100 0.65 150 25 1.25 ±0.2
LK 2125 1R0[]-T RoHS 1.0 ±10%,±20% 45 75 0.30 80 10 0.85 ±0.2
LK 2125 1R2[]-T RoHS 1.2 ±10%,±20% 45 65 0.35 80 10 0.85 ±0.2
LK 2125 1R5[]-T RoHS 1.5 ±10%,±20% 45 60 0.40 80 10 0.85 ±0.2
LK 2125 1R8[]-T RoHS 1.8 ±10%,±20% 45 55 0.45 80 10 0.85 ±0.2
LK 2125 2R2[]-T RoHS 2.2 ±10%,±20% 45 50 0.50 50 10 0.85 ±0.2
LK 2125 2R7[]-T RoHS 2.7 ±10%,±20% 45 45 0.55 50 10 1.25 ±0.2
LK 2125 3R3[]-T RoHS 3.3 ±10%,±20% 45 41 0.60 50 10 1.25 ±0.2
LK 2125 3R9[]-T RoHS 3.9 ±10%,±20% 45 38 0.70 30 10 1.25 ±0.2
LK 2125 4R7[]-T RoHS 4.7 ±10%,±20% 45 35 0.70 30 10 1.25 ±0.2
LK 2125 5R6[]-T RoHS 5.6 ±10%,±20% 50 32 0.60 15 4 1.25 ±0.2
LK 2125 6R8[]-T RoHS 6.8 ±10%,±20% 50 29 0.70 15 4 1.25 ±0.2
LK 2125 8R2[]-T RoHS 8.2 ±10%,±20% 50 26 0.70 15 4 1.25 ±0.2
LK 2125 100[]-T RoHS 10 ±10%,±20% 50 24 0.80 15 2 1.25 ±0.2
LK 2125 120[]-T RoHS 12 ±10%,±20% 50 22 0.90 15 2 1.25 ±0.2
LK 2125 150M-T RoHS 15 ±20% 30 19 0.70 5 1 1.25 ±0.2
LK 2125 180M-T RoHS 18 ±20% 30 18 0.80 5 1 1.25 ±0.2
LK 2125 220M-T RoHS 22 ±20% 30 16 0.90 5 1 1.25 ±0.2
LK 2125 270M-T RoHS 27 ±20% 30 14 1.00 5 1 1.25 ±0.2
LK 2125 330M-T RoHS 33 ±20% 30 13 1.10 5 0.4 1.25 ±0.2
※ [] mark indicates the Inductance tolerance code.
DC Resistance
[Ω](max.)
Rated current
[mA](max.)
Measuring
frequency
[MHz]
Thickness
[mm]
Parts number EHS Nominal inductance
[μH] Inductance tolerance Q
(min.)
Self-resonant
frequency
[MHz](min.)
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-01
Multilayer chip inductors
Multilayer chip inductors for high frequency, Multilayer chip bead inductors
Multilayer common mode choke coils(MC series F type)
PACKAGING
①Minimum Quantity
Tape & Reel Packaging
Type Thickness
mm(inch)
Standard Quantity [pcs]
Paper Tape Embossed Tape
CK1608(0603) 0.8 (0.031) 4000
CK2125(0805) 0.85(0.033) 4000
1.25(0.049) 2000
CKS2125(0805) 0.85(0.033) 4000
1.25(0.049) 2000
CKP1608(0603) 0.8 (0.031) 4000
CKP2012(0805) 0.9 (0.035) 3000
CKP2016(0806) 0.9 (0.035) 3000
CKP2520(1008)
0.7 (0.028) 3000
0.9 (0.035) 3000
1.1 (0.043) 2000
NM2012(0805) 0.9 (0.035) 3000
NM2520(1008) 1.1 (0.043) 2000
LK1005(0402) 0.5 (0.020) 10000
LK1608(0603) 0.8 (0.031) 4000
LK2125(0805) 0.85(0.033) 4000
1.25(0.049) 2000
HK0402(01005) 0.2 (0.008) 20000
HK0603(0201) 0.3 (0.012) 15000
HK1005(0402) 0.5 (0.020) 10000
HK1608(0603) 0.8 (0.031) 4000
HK2125(0805) 0.85(0.033) 4000
1.0 (0.039) 3000
HKQ0402(01005) 0.2 (0.008) 20000 40000
HKQ0603W(0201) 0.3 (0.012) 15000
HKQ0603S(0201) 0.3 (0.012) 15000
HKQ0603U(0201) 0.3 (0.012) 15000
AQ105(0402) 0.5 (0.020) 10000
BK0402(01005) 0.2 (0.008) 20000
BK0603(0201) 0.3 (0.012) 15000
BK1005(0402) 0.5 (0.020) 10000
BKH1005(0402) 0.5 (0.020) 10000
BK1608(0603) 0.8 (0.031) 4000
BK2125(0805) 0.85(0.033) 4000
1.25(0.049) 2000
BK2010(0804) 0.45(0.018) 4000
BK3216(1206) 0.8 (0.031) 4000
BKP0603(0201) 0.3 (0.012) 15000
BKP1005(0402) 0.5 (0.020) 10000
BKP1608(0603) 0.8 (0.031) 4000
BKP2125(0805) 0.85(0.033) 4000
MCF0806(0302) 0.4 (0.016) 10000
MCF1210(0504) 0.55(0.022) 5000
MCF2010(0804) 0.45(0.018) 4000
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-01
②Taping material
Card board carrier tape
CK 1608
CKP 1608
CK 2125
CKS 2125
LK 1005
LK 1608
LK 2125
HK 0402
HK 0603
HK 1005
HK 1608
HKQ 0402
HKQ 0603
AQ 105
BK 0402
BK 0603
BK 1005
BK 1608
BK 2125
BK 2010
BKP 0603
BKP 1005
BKP 1608
BKP 2125
BKH 1005
Embossed Tape
CK 2125
CKS 2125
CKP 2012
CKP 2016
CKP 2520
NM 2012
NM 2520
LK 2125
HKQ 0402
HK 2125
BK 2125
BK 3216
MCF 0806
MCF 1210
MCF 2010
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-01
③Taping Dimensions
Paper tape (0.315 inches wide)
Unit : mm(inch)
Type Thickness
mm(inch)
Chip cavity Insertion Pitch Tape Thickness
CK1608(0603) 0.8 (0.031) 1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
CK2125(0805) 0.85(0.033) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
CKS2125(0805) 0.85(0.033) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
CKP1608(0603) 0.8 (0.031) 1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
LK1005(0402) 0.5 (0.020) 0.65±0.1
(0.026±0.004)
1.15±0.1
(0.045±0.004)
2.0±0.05
(0.079±0.002)
0.8max
(0.031max)
LK1608(0603) 0.8 (0.031) 1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
LK2125(0805) 0.85(0.033) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
HK0402(01005) 0.2 (0.008) 0.25±0.04
(0.010±0.002)
0.45±0.04
(0.018±0.002)
2.0±0.05
(0.079±0.002)
0.36max
(0.014max)
HK0603(0201) 0.3 (0.012) 0.40±0.06
(0.016±0.002)
0.70±0.06
(0.028±0.002)
2.0±0.05
(0.079±0.002)
0.45max
(0.018max)
HK1005(0402) 0.5 (0.020) 0.65±0.1
(0.026±0.004)
1.15±0.1
(0.045±0.004)
2.0±0.05
(0.079±0.002)
0.8max
(0.031max)
HK1608(0603) 0.8 (0.031) 1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
HKQ0402(01005) 0.2 (0.008) 0.25±0.04
(0.010±0.002)
0.45±0.04
(0.018±0.002)
2.0±0.05
(0.079±0.002)
0.36max
(0.01max)
HKQ0603W(0201) 0.3 (0.012) 0.40±0.06
(0.016±0.002)
0.70±0.06
(0.028±0.002)
2.0±0.05
(0.079±0.002)
0.45max
(0.018max)
HKQ0603S(0201) 0.3 (0.012) 0.40±0.06
(0.016±0.002)
0.70±0.06
(0.028±0.002)
2.0±0.05
(0.079±0.002)
0.45max
(0.018max)
HKQ0603U(0201) 0.3 (0.012) 0.40±0.06
(0.016±0.002)
0.70±0.06
(0.028±0.002)
2.0±0.05
(0.079±0.002)
0.45max
(0.018mx)
AQ105(0402) 0.5 (0.020) 0.75±0.1
(0.030±0.004)
1.15±0.1
(0.045±0.004)
2.0±0.05
(0.079±0.002)
0.8max
(0.031max)
BK0402(01005) 0.2 (0.008) 0.25±0.04
(0.010±0.002)
0.45±0.04
(0.018±0.002)
2.0±0.05
(0.079±0.002)
0.36max
(0.014max)
BK0603(0201) 0.3 (0.012) 0.40±0.06
(0.016±0.002)
0.70±0.06
(0.028±0.002)
2.0±0.05
(0.079±0.002)
0.45max
(0.018max)
BK1005(0402) 0.5 (0.020) 0.65±0.1
(0.026±0.004)
1.15±0.1
(0.045±0.004)
2.0±0.05
(0.079±0.002)
0.8max
(0.031max)
BK1608(0603) 0.8 (0.031) 1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
BK2125(0805) 0.85(0.033) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
BK2010(0804) 0.45(0.018) 1.2±0.1
(0.047±0.004)
2.17±0.1
(0.085±0.004)
4.0±0.1
(0.157±0.004)
0.8max
(0.031max)
BKP0603(0201) 0.3 (0.012) 0.40±0.06
(0.016±0.002)
0.70±0.06
(0.028±0.002)
2.0±0.05
(0.079±0.002)
0.45max
(0.018max)
BKP1005(0402) 0.5 (0.020) 0.65±0.1
(0.026±0.004)
1.15±0.1
(0.045±0.004)
2.0±0.05
(0.079±0.002)
0.8max
(0.031max)
BKP1608(0603) 0.8 (0.031) 1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
BKP2125(0805) 0.85(0.033) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.1max
(0.043max)
BKH1005(0805) 0.5 (0.020) 0.65±0.1
(0.026±0.004)
1.15±0.1
(0.045±0.004)
2.0±0.05
(0.079±0.002)
0.8max
(0.031max)
Unit : mm(inch)
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-01
Embossed Tape (0.315 inches wide)
Type Thickness
mm(inch)
Chip cavity Insertion Pitch Tape Thickness
K T
CK2125(0805) 1.25(0.049) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
2.0
(0.079)
0.3
(0.012)
CKS2125(0805) 1.25(0.049) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
2.0
(0.079)
0.3
(0.012)
CKP2012(0805) 0.9 (0.035) 1.55±0.2
(0.061±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.3
(0.051)
0.3
(0.012)
CKP2016(0806) 0.9 (0.035) 1.8±0.1
(0.071±0.004)
2.2±0.1
(0.087±0.004)
4.0±0.1
(0.157±0.004)
1.3
(0.051)
0.25
(0.01)
CKP2520(1008)
0.7 (0.028)
2.3±0.1
(0.091±0.004)
2.8±0.1
(0.110±0.004)
4.0±0.1
(0.157±0.004)
1.4
(0.055)
0.3
(0.012)
0.9 (0.035) 1.4
(0.055)
1.1 (0.043) 1.7
(0.067)
NM2012(0805) 0.9 (0.035) 1.55±0.2
(0.061±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.3
(0.051)
0.3
(0.012)
NM2520(1008) 1.1 (0.043) 2.3±0.1
(0.091±0.004)
2.8±0.1
(0.110±0.004)
4.0±0.1
(0.157±0.004)
1.7
(0.067)
0.3
(0.012)
LK2125(0805) 1.25(0.049) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
2.0
(0.079)
0.3
(0.012)
HK2125(0805)
0.85(0.033) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
1.5
(0.059) 0.3
(0.012)
1.0 (0.039) 2.0
(0.079)
BK2125(0805) 1.25(0.049) 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.1
(0.157±0.004)
2.0
(0.079)
0.3
(0.012)
BK3216(1206) 0.8(0.031) 1.9±0.1
(0.075±0.004)
3.5±0.1
(0.138±0.004)
4.0±0.1
(0.157±0.004)
1.4
(0.055)
0.3
(0.012)
MCF0806(0302) 0.4 (0.016) 0.75±0.05
(0.030±0.002)
0.95±0.05
(0.037±0.002)
2.0±0.05
(0.079±0.002)
0.55
(0.022)
0.3
(0.012)
MCF1210(0504) 0.55(0.022) 1.15±0.05
(0.045±0.002)
1.40±0.05
(0.055±0.002)
4.0±0.1
(0.157±0.004)
0.65
(0.026)
0.3
(0.012)
MCF2010(0804) 0.45(0.018) 1.1±0.1
(0.043±0.004)
2.3±0.1
(0.091±0.004)
4.0±0.1
(0.157±0.004)
0.85
(0.033)
0.3
(0.012)
Unit : mm(inch)
Embossed Tape (0.157 inches wide)
Type Thickness
mm(inch)
Chip cavity Insertion Pitch Tape Thickness
K T
HKQ0402(01005) 0.2 (0.008) 0.23 0.43 1.0±0.02 0.5max. 0.25max.
Unit : mm(inch)
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-01
④LEADER AND BLANK PORTION
⑤Reel Size
⑥Top tape strength
The top tape requires a peel-off force of 0.1~0.7N in the direction of the arrow as illustrated below.
5±1.0mm
(0.197±0.039)
Less than 1.5mm
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-01
Multilayer chip inductors
Multilayer chip inductors for high frequency, Multilayer chip bead inductors
Multilayer common mode choke coils(MC series F type)
RELIABILITY DATA
1. Operating Temperature Range
Specified Value
BK0402
-55~+125℃
BK0603
BK1005
BKH1005
BK1608
BK2125
ARRAY BK2010
BK3216
BKP0603
-55~+85℃
BKP1005
BKP1608
BKP2125
MCF 0806
-40~+85℃
MCF 1210
MCF 2010
CK1608
-40~+85℃
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
LK2125
HK0402/HKQ0402
-55~+125℃
HK0603
HK1005
HK1608 -40~+85℃
HK2125
HKQ0603W/HKQ0603S/HKQ0603U -55~+125℃
AQ105
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-01
2. Storage Temperature Range
Specified Value
BK0402
-55~+125℃
BK0603
BK1005
BKH1005
BK1608
BK2125
ARRAY BK2010
BK3216
BKP0603
-55~+85℃
BKP1005
BKP1608
BKP2125
MCF 0806
-40~+85℃
MCF 1210
MCF 2010
CK1608
-40~+85℃
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
LK2125
HK0402/HKQ0402
-55~+125℃
HK0603
HK1005
HK1608 -40~+85℃
HK2125
HKQ0603W/HKQ0603S/HKQ0603U -55~+125℃
AQ105
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-01
3. Rated Current
Specified Value
BK0402 240~540mA DC
BK0603 100~500mA DC
BK1005 120~1000mA DC
BKH1005 200mA DC
BK1608 150~1500mA DC
BK2125 200~1200mA DC
ARRAY BK2010 100mA DC
BK3216 100~200mA DC
BKP0603 1.0A DC
BKP1005 800~2000mA DC
BKP1608 1.0~3.0A DC
BKP2125 1.5~4.0A DC
MCF 0806 0.1~0.13A DC
MCF 1210 0.1A DC
MCF 2010 0.1A DC
CK1608 50~60mA DC
CK2125 60~500mA DC
CKS2125 110~280mA DC
CKP1608 0.35~0.9A DC
CKP2012 0.7~1.2A DC
CKP2016 0.9~1.6A DC
CKP2520 1.1~1.8A DC
NM2012 0.8~1.5A DC
NM2520 0.9~1.1A DC
LK1005 20~25mA DC
LK1608 1~150mA DC
LK2125 5~300mA DC
HK0402 160~380mA DC
HK0603 60~470mA DC
HK1005 110~300mA DC
HK1608 150~300mA DC
HK2125 300mA DC
HKQ0402 90~500mA DC
HKQ0603W 160~850mA DC
HKQ0603S 130~600mA DC
HKQ0603U 130~600mA DC
AQ105 280~710mA DC
Definition of rated current:
・In the CK, CKS and BK Series, the rated current is the value of current at which the temperature of the element is increased within 20℃.
・In the BK Series P type and CK Series P type, NM Series the rated current is the value of current at which the temperature of the element is increased within
40℃.
・In the LK, HK, HKQ, and AQ Series, the rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC bias,
or the value of current at which the temperature of the element is increased within 20℃.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-01
4. Impedance
Specified Value
BK0402 10~120Ω ±25%
BK0603 10~600Ω ±25%
BK1005 10~1800Ω ±25%
BKH1005 1500~1800Ω ±25%
BK1608 22~2500Ω ±25%
BK2125 15~2500Ω ±25%
ARRAY BK2010 5~1000Ω ±25%
BK3216 68~1000Ω ±25%
BKP0603 22~33Ω ±25%
BKP1005 10~220Ω ±25%
BKP1608 33~470Ω ±25%
BKP2125 33~330Ω ±25%
MCF 0806 12~90Ω ±5Ω(12Ω), ±20%(Other)
MCF 1210 90Ω ±25%
MCF 2010 90Ω ±25%
CK1608
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
LK2125
HK0402/HKQ0402
HK0603
HK1005
HK1608
HK2125
HKQ0603W/HKQ0603S/HKQ0603U
AQ105
Test Methods and
Remarks
BK0402Series
Measuring frequency : 100±1MHz
Measuring equipment : E4991A(or its equivalent)
Measuring jig : 16196D(or its equivalent)
BK0603Series, BKP0603Series
Measuring frequency : 10±1MHz
Measuring equipment : 4291A(or its equivalent)
Measuring jig : 16193A(or its equivalent)
BK1005Series, BKP1005Series ,BKH1005Series
Measuring frequency : 100±1MHz
Measuring equipment : 4291A(or its equivalent)
Measuring jig : 16192A(or its equivalent), 16193A(or its equivalent)
BK1608・2125Series, BKP1608・2125Series
Measuring frequency : 100±1MHz
Measuring equipment : 4291A(or its equivalent), 4195A(or its equivalent)
Measuring jig : 16092A(or its equivalent) or 16192A(or its equivalent)/HW
BK2010・3216Series,MCFSeries
Measuring frequency : 100±1MHz
Measuring equipment : 4291A(or its equivalent), 4195A(or its equivalent)
Measuring jig : 16192A(or its equivalent)
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-01
5. Inductance
Specified Value
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
ARRAY BK2010
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0806
MCF 1210
MCF 2010
CK1608 4.7~10.0μH: ±20%
CK2125 0.1~10.0μH: ±20%
CKS2125 1.0~10.0μH: ±20%
CKP1608 0.33~2.2μH: ±20%
CKP2012 0.47~4.7μH: ±20%
CKP2016 0.47~4.7μH: ±20%
CKP2520 0.47~4.7μH: ±20%
NM2012 0.82~1.0μH: ±20%
NM2520 1.0~2.2μH: ±20%
LK1005 Inductance 0.12~2.2μH: ±10%, Q 0.12~2.2μH: ±30%
LK1608 Inductance 0.047~33.0μH ±20% 0.10~12.0μH: ±10%
Q 0.12~2.2μH: ±30%
LK2125 Inductance 0.047~33.0μH ±20% 0.10~12.0μH: ±10%
Q 0.12~2.2μH: ±30%
HK0402 1.0~6.2nH: ±0.3nH 6.8~12nH: ±5%
HK0603 1.0~6.2nH: ±0.3nH 6.8~100nH: ±5%
HK1005 1.0~6.2nH: ±0.3nH 6.8~270nH: ±5%
HK1608 1.0~5.6nH: ±0.3nH 6.8~470nH: ±5%
HK2125 1.5~5.6nH: ±0.3nH 6.8~470nH: ±5%
HKQ0402 0.5~5.6nH: ±0.3nH 6.2~27nH: ±5%
HKQ0603W 0.6~3.9nH: ±0.3nH 4.3~22nH: ±5%
HKQ0603S 0.6~6.2nH: ±0.3nH 6.8~22nH: ±5%
HKQ0603U 0.6~6.2nH: ±0.3nH 6.8~22nH: ±5%
AQ105 1.0~6.2nH: ±0.3nH 6.8~15nH: ±5%
Test Methods and
Remarks
CKSeries
Measuring frequency : 2~4MHz(CK1608)
Measuring frequency : 2~25MHz(CK2125)
Measuring frequency : 2~1MHz(CKS2125)
LKSeries
Measuring frequency : 10~25MHz(LK1005)
Measuring frequency : 1~50MHz(LK1608)
Measuring frequency : 0.4~50MHz(LK2125)
CKP、NMSeries
Measuring frequency : 1MHz(CKP2012・CKP2016・CKP2520・NM2012・NM2520)
Measuring equipment /jig :・4194A+16085B+16092A(or its equivalent)
・4195A+41951+16092A(or its equivalent)
・4294A+16192A(or its equivalent)
・4291+1693A(or its equivalent)/LK1005
・4285A+42841A+42842C+42851-61100(CKP2012・CKP2016・CKP2520・NM2012・NM2520)
Measuring current :・1mA rms(0.047~4.7μH
・0.1mA rms(5.6~33μH)
HK、HKQ、AQ Series
Measuring frequency : 100MHz(HK0402・HKQ0402・HK0603・HK1005・AQ105)
Measuring frequency : 50/100MHz(HK1608・HK2125)
Measuring frequency : 500MHz(HKQ0402・HKQ0603S・HKQ0603U)
Measuring frequency : 300/500MHz(HKQ0603W)
Measuring equipment /jig :・4291A+16197A(or its equivalent)/HK060・AQ105
・4291A+16193A(or its equivalent)/HK1005
・E4991A+16197A(or its equivalent)/HKQ0603S・HKQ0603・HKQ0603W
・4291A+16092A in-house made jig(or its equivalent)/HK1608・HK2125
・E4991A+16196D(or its equivalent)/HK0402・HKQ0402