Technical Data 05.10.2020 TREDUX MA47 - medium wall adhesive lined Heat shrinkable tubing up to 4:1 - 1 m lengths TREDUX MA47-48ST-95/30 Article Number 323-50017 Material: Polyolefin, cross-linked (PO-X) Colour: Black (BK) Adhesive: Hot melt adhesive Supplied D min.: 95.0 mm Recov. d max.: 30.0 mm Wall (WT): 3.0 mm Shrink Ratio: up to 4:1 Longitudinal Change After Shrinkage: -10 % max. Min. Shrink Temperature - C: +120 C Test Method Flammability: not flame retardant Operating Temperature - C: -55 C to +110 C Heat Shock Test: 4h/225C Behaviour at Heat Shock: not cracking, not fluid, not dripping Heat Aging Test: 168h/150C Minimum Tensile Strength At Heat Aging: 12 MPa Minimum Elongation At Heat Aging: 300 % Behaviour At Low Temperature: not cracking ASTM D2671 Dielectric Strength: 15 kV/mm IEC 60243 Insulation Class: A (VDE 0530) Tensile Strength: 12 MPa ASTM D2671 Elongation at break: 350 ASTM D2671 Water Absorption: 0.2 % ASTM D2671 We assume no responsibility that the Product will be used for the intended purpose, this is beyond our control. Its up to the customer to check the suitability for a specific application by means of tests. Technical changes and errors reserved