Material: Polyolefin, cross-linked (PO-X)
Colour: Black (BK)
Adhesive: Hot melt adhesive
Supplied ∅ D min.: 95.0 mm
Recov. ∅ d max.: 30.0 mm
Wall (WT): 3.0 mm
Shrink Ratio: up to 4:1
Longitudinal Change After Shrinkage: -10 % max.
Min. Shrink Temperature - °C: +120 °C
Test Method
Flammability: not flame retardant
Operating Temperature - °C: -55 °C to +110 °C
Heat Shock Test: 4h/225°C
Behaviour at Heat Shock: not cracking, not fluid, not dripping
Heat Aging Test: 168h/150°C ASTM D2671
Minimum Tensile Strength At Heat Aging: 12 MPa
Minimum Elongation At Heat Aging: 300 %
Behaviour At Low Temperature: not cracking ASTM D2671
Dielectric Strength: 15 kV/mm IEC 60243
Insulation Class: A (VDE 0530)
Tensile Strength: 12 MPa ASTM D2671
Elongation at break: 350 ASTM D2671
Water Absorption: 0.2 %
We assume no responsibility that the Product will be used for the intended purpose, this is beyond our control. It´s up to the
customer to check the suitability for a specific application by means of tests. Technical changes and errors reserved
Technical Data
TREDUX MA47 - medium wall adhesive lined
Heat shrinkable tubing up to 4:1 - 1 m lengths
05.10.2020
TREDUX MA47-48ST-95/30
Article Number 323-50017
