EB100 High Accuracy Miniature Pressure Transducer
EB100 www.meas-spec.com April 2015
1/4
Miniature design (body ø11 mm)
High Accuracy
EMI Protected per CE Compliance
Wide Temperature Range
Absolute
DESCRIPTION
The EB100 pressure transducer is the smallest design proposed by MEAS from the UltraStable line. The EB100
sets a new price/performance standard for demanding commercial and heavy industrial applications where high
accuracy, small size and low weight are desirable. This series is suitable for measurement of liquid or gas
pressure, including difficult media such as contaminated water, steam, and mildly corrosive fluids.
The EB100 uses MEAS’ UltraStable technology that provides stability over a wide temperature range and
performance previously available only in much higher priced sensors. The UltraStable technology employs a
silicon-based strain gage, isolated from the media by an oil-filled capsule and a stainless steel diaphragm. The
high stability is provided through MEMS-based technology, which also offers excellent repeatability and minimal
hysteresis. The 100% stainless steel media isolation covers all but the most corrosive environments, offering
excellent durability. Custom OEM designs are available including various ports and output options.
The standard version is suitable for many applications, but the dedicated design team at our Transducer
Engineering Centre stands ready to provide a semi-custom design where the volume and application warrants.
FEATURES APPLICATIONS
Miniature Design and Light Weight
Motor Sport: Oil, Coolant, Fuel, Brake
Systems
Pressure Range: 20 to 350Bar (300 to 5000psi)
Hydraulic/Pneumatic Systems
±1% Total Error Band
Automotive Test Stands
-40°C to +125°C Operating Temperature Range
Military/Aerospace Test Stands
STANDARD RANGES
Pressure Ranges
Type
Pressure Overload
Burst Pressure
(Psi)
Absolute
(rated pressure)
(rated pressure)
0 to 300
2X
3X
0 to 500
2X
3X
0 to 01K
2X
3X
0 to 1K5
2X
3X
0 to 03K
2X
3X
0 to 05K
2X
3X
EB100 High Accuracy Miniature Pressure Transducer
EB100 www.meas-spec.com April 2015
2/4
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Accuracy (RSS of linearity, hysteresis, and repeatability)
-0.25
0.25
%Span
1
Long Term Stability (1 year)
-0.1
0.1
%Span
Total Error Band (over compensated range)
-1
+1
%Span
2
Bandwidth (-3 dB)
120
Hz
Isolation resistance
50
MΩ (50 Vdc)
Compensated Temperature
-20
(-4)
+125
(+257)
°C
(°F)
Operating Temperature
-40
(-40)
+125
(+257)
°C
(°F)
Storage Temperature
-40
(-40)
+125
(+257)
°C
(°F)
Vibration (20 to 200Hz)
20
g
3
Shock (11ms)
50
g
4
Pressure Cycles (Zero to Full Scale)
1
Million
Weight (without cable)
15
grams
5
Ingress Protection
IP66
Media Compatibility
Media compatible with 17-4PH, 316 S.S. and FKM
Fluoroelastomer
For custom configurations, consult factory.
Notes
1. Best fit straight line for all pressure ranges except for 200 bar (3 kpsi) = +/-0.35% and 350 bar (5 kpsi) = +/-0.5%.
2. TEB includes all accuracy errors, thermal errors, span and zero tolerances.
3. Per MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve L.
4. 1/2 sine per MIL-STD 202F Method 213B condition A.
5. 21 grams per meter of cable to be added
CE Compliance
IEC 55022 Emissions Class A & B
IEC 61000-4-2 Electrostatic Discharge Immunity (2kV contact/2kV air)
IEC 61000-4-3 EM Field Immunity (3V/m)
IEC 61000-4-4 Electrical Fast Transient Immunity (0.5kV)
IEC 61000-4-6 Conducted Immunity (3V)
SUPPLY VOLTAGE / OUTPUT SIGNAL AND ELECTRICAL CONNECTION OPTIONS
SUPPLY VOLTAGE
Code
Supply voltage
Output signal
U
8 to 30 V (current < 5 mA)
0.5 – 4.5 V
ELECTRICAL CONNECTION OPTIONS (table 1)
Code
Connection
M
1 metre of shielded cable (PFA)
P
5 metres of shielded cable (PFA)
R
10 metres of shielded cable (PFA)
S
1 metre of shielded cable (PFA) fully covered by shrink
tube model Raychem DR25 or equivalent
EB100 High Accuracy Miniature Pressure Transducer
EB100 www.meas-spec.com April 2015
3/4
DIMENSIONS
PHYSICAL (table 2)
MODEL
PRESSURE PORT
LENGTH
"C"
HEX.
"D"
O-RING SUPPLIED
INSTALLATION
TORQUE (MAX.)
N
M5x0.8
6.6 (.26”)
11 (.433")
Ø3.5x1.5 FKM Fluoroelastomer
1 Nm (9 In-Pounds)
V
10-32 UNF-2A
6.6 (.26”)
11 (.433")
Ø3.5x1.5 FKM Fluoroelastomer
1 Nm (9 In-Pounds)
S
M8X1
7.6 (.30”)
11 (.433")
Ø6.07x1.63 FKM Fluoroelastomer
3 Nm (27 In-Pounds)
Q
5/16-24 UNF-2A
7.6 (.30”)
11 (.433")
Ø6.07x1.63 FKM Fluoroelastomer
3 Nm (27 In-Pounds)
P
M10x1
8.2 (.32")
13 (.512")
Ø7.65x1.63 FKM Fluoroelastomer
5 Nm (27 In-Pounds)
X
3/8-24 UNF-2A
8.2 (.32")
13 (.512")
Ø7.65x1.63 FKM Fluoroelastomer
5 Nm (27 In-Pounds)
INSTALLATION AND CONNECTION
RECOMMENDED PRESSURE FITTING DESIGN(1)
Thread "A"
Dim. “B”
Dim. “C”
Dim. “D”
M5x0.8(2)
6.35 mm
1.5 mm
0.2 mm
10-32 UNF(2)
0.25”
0.059”
0.008”
M8x1
9.1 mm
1.9 mm
0.3 mm
5/16-24 UNF-2A
0.358”
0.074”
0.012”
M10x1
10.7 mm
1.9 mm
0.3 mm
3/8-24 UNF-2A
0.421"
0.074”
0.012”
(1) This pressure fitting design is only a recommendation but it stays under customer's responsibility.
(2) For model M5x0.8 or 10-32 UNF used with pressure higher than 200 bar (3 kpsi) it is recommended to replace o-ring by
bonded ring (ref: MSE05417) and to design the pressure fitting without o-ring chamber.
WIRING: SHIELDED CABLE 4 LEADS AWG26
RED
+SUPPLY
GREEN
+OUTPUT
WHITE
-OUTPUT
BLACK
-SUPPLY
Cable shield not connected to body
EB100 High Accuracy Miniature Pressure Transducer
EB100 www.meas-spec.com April 2015
4/4
ORDERING INFORMATION
EB1
U
M
-
0000
1
5
-
100B
G
Model
Supply
Voltage
Connection Type
-
0000
Calibration
Certificate
Pressure
Port
-
Pressure
Range
Pressure
Type
EB1
U = 8 to 30V
M = 1 Meter Cable
P = 5 Meter Cable
R = 10 Meter Cable
S = 1 Meter Cable
fully covered by
shrink tube
Raychem DR25 or
equivalent
-
0 = No calibration
certificate
1 = With calibration
certificate
S = M8x1
Q = 5/16-24 UNF
N = M5x0.8
V = 10-32 UNF Male
P = M10x1 Male
X = 3/8-24 UNF Male
-
300P
500P
01KP
1K5P
03KP
05KP
020B
035B
070B
100B
200B
350B
A = Absolute
Note: For pressure ports M5x0.8 or 10-32UNF used with pressure higher than 200Bar (3000psi), it is recommended to replace the o-ring
with a bonded ring, and to design the pressure fitting without the o-ring chamber. Please contact factory for details.
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-tech Park (North)
Nanshan District
Shenzhen 518057, China
Tel: +86 755 33305088
Fax: +86 755 33305099
Sales: pfg.cs.asia@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
EB1UM-00000P-05KPA