76mm (3.0INCH) SINGLE DIGIT DISPLAY Part Number: SC30-21YWA Yellow Features Description z 3.0 inch digit height. The Yellow source color devices are made with Gallium z Low current operation. Arsenide Phosphide on Gallium Phosphide Yellow Light z Excellent character appearance. Emitting Diode. z Easy mounting on P.C. boards or sockets. z Categorized for luminous intensity. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367 Selection Guide Part No. Dice SC30-21YWA Iv (mcd) [1] @ 10mA Lens Type Yellow (GaAsP/GaP) Description Min. Typ. 14 30 *5.6 *12 Common Cathode , Rt. Hand Decimal. White Diffused Notes: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Per segment or(Dp and Comma) Yellow 12.6 (4.2) 15.0 (5.0) V IF=20mA IR Reverse Current Per segment or(Dp and Comma) Yellow 10 (10) uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation Per segment or(Dp and Comma) 450(150) mW DC Forward Current Per segment or(Dp and Comma) 30(30) mA Peak Forward Current [1] Per segment or(Dp and Comma) 140(140) mA Reverse Voltage Per segment or(Dp and Comma) 5(5) V Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367 Y Yellow SC30-21YWA SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367 SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367 PACKING & LABEL SPECIFICATIONS SC30-21YWA SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367 SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAM8239 REV NO: V.1A DATE: JAN/12/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003367