5-1-1 Unicolor lamps 3 Round LEDs SEL6010 Series (available as Direct Mount) Part Number Emitting Color SEL6110R SEL6110S SEL6210R SEL6210S SEL6810A SEL6810D SEL6910A SEL6910D SEL6710K SEL6710Y SEL6410E SEL6410G SEL6510C SEL6510G SEL6E10C SELK6E10C-D SELK6E10C-2 SELU6910C-S Lens Color Deep red Deep red Red Red Amber Amber Orange Orange Yellow Yellow Green Green Pure green Pure green Blue Diffused red Transparent red Diffused red Transparent red Transparent orange Diffused orange Transparent orange Diffused orange Transparent yellow Diffused yellow Transparent green Diffused green Water clear Diffused green Water clear Blue Water clear High luminosity Blue Water clear Ultrahigh luminosity Orange Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv P d Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) IF (mA) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 2.0 2.5 10 2.6 10 700 10 625 10 100 10 2.0 2.5 10 3.9 10 700 10 625 10 100 10 1.9 2.5 10 18 20 630 10 620 10 35 10 1.9 2.5 10 41 20 630 10 620 10 35 10 1.9 2.5 10 22 10 610 10 605 10 35 10 1.9 2.5 10 9.6 10 610 10 605 10 35 10 1.9 2.5 10 22 10 587 10 590 10 33 10 1.9 2.5 10 11 10 587 10 590 10 33 10 2.0 2.5 10 37 10 570 10 571 10 30 10 2.0 2.5 10 11 10 570 10 571 10 30 10 2.0 2.5 10 90 20 560 10 567 10 20 10 2.0 2.5 10 30 20 560 10 567 10 20 10 2.0 2.5 10 42 20 555 10 559 10 20 10 2.0 2.5 10 9.6 20 555 10 559 10 20 10 4.0 4.8 20 60 20 430 20 466 20 65 20 3.6 4.0 20 100 20 468 20 470 20 30 20 3.8 4.2 20 350 20 468 20 470 20 30 20 2.0 2.5 20 550 20 591 20 590 20 15 20 Directional Characteristics (representative example) Chip Material GaP GaP GaAsP GaAsP GaAsP GaAsP GaAsP GaAsP GaP GaP GaP GaP GaP GaP GaN GaN on Si GaN on Si AlGaInP (Unit: mm) External Dimensions Dimensional Tolerance: 0.3 Diffused lens 50 90 100% 90 100% 50 0 50 Transparent lens 90 100% 0.65max 0.450.1 (2.54) 0.80.2 4.00.2 0.40.1 0 60 Cathode 50 60 23.0min 5.50.5 (1.7) 3.50.1 60 30 1.0min 60 90 100% 30 30 3.5 0 0 30 Resin heap 0.8max 4.4 o3.10.1 Product Mass: Approx. 0.13 g LEDs 227 5-1 Visible Light LEDs Absolute Maximum Ratings Visible Light Unicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 -0.45 25C or higher f=1kHz, tw100 s 70 100 3 5 -30 to +80 -30 to +85 -30 to +100 Visible Light Bicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 -0.45 100 25C or higher f=1kHz, tw100 s 4 5 -30 to +85 -30 to +100 Visible Light Unicolor Surface Mount LEDs Parameter Unit IF IF IFP VR Top Tstg mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 -0.27 70*2 30 -0.45 100*1 25C or higher f=1kHz, tw100 s 5 3 -30 to +85 -30 to +100 -30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 -0.45 70 4 -30 to +85 -30 to +100 25C or higher f=1kHz, tw100 s Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 -0.45 50 70 5 -30 to +80 -30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25C or higher f=1kHz, tw100 s