7/97 N/AL.8.300.100.01
F07
Miniature Series 07
General Purpose Filter
1/8
"
and 1/4
"
Port Sizes
●Compact design
●Protects air operated devices by removing liquid and
solids contaminants
●Screw-on bowl reduces maintenance time
●Can be disassembled without the use of tools or
removal from the air line
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Technical Data
Fluid: Compressed air
Maximum pressure:
Transparent bowl: 10 bar (150 psig)
Metal bowl: 17 bar (250 psig)
Operating temperature:*
Transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +80°C (0° to +175°F)
* Air supply must be dry enough to avoid ice formation at temperatures below
+2°C (+35°F)
Particle removal: 5 µm or 40 µm filter element
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Typical flow at 6,3 bar (90 psig) inlet pressure at 0,3 bar (5 psig)
pressure drop:
1/8
"
Ports, 5 µm element: 9 dm3/s (19 scfm)
1/4
"
Ports, 5 µm element: 11,5 dm3/s (24 scfm)
Nominal bowl size: 31 ml (1 fluid ounce)
Drain connection: 1/8
"
pipe
Automatic drain operation: Spitter type drain operates momentarily
when a rapid change in air flow occurs or when the supply
pressure is reduced.
Materials:
Body: Zinc
Bowl:
Transparent: Polycarbonate
Metal: Zinc
Element: Sintered polypropylene
Elastomers: Neoprene & nitrile
Ordering Information
See
Ordering Information
on the following
pages.
ISO Symbols
Automatic drain Manual drain
Back to Selector Page
N/AL.8.300.100.02 7/97
Typical Performance Characteristics
F07
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
INLET PRESSURE: bar g (psig)
FLOW CHARACTERISTICS
048121620dm
3/s
AIR FLOW
0 8 16 24 32 40 48 scfm
0,8
0,6
0,4
0,2
0
OUTLET PRESSURE
bar g
10
8
6
4
2
0
psig
1
(15)
2,5
(36)
1,6
(23) 6,3
(91)
4,0
(58) 10
(150)
8
(116)
PORT SIZE: 1/4
"
40 µm ELEMENT
Wall Mounting Bracket
and Body Screws
5939-06
Accessories
Port Size Model Numbers Flow dm3/s (scfm) * Weight kg (lbs)
G1/8 F07-100-A3TG 9 (19) 0.13 (0.28)
G1/4 F07-200-A3TG 11,5 (24) 0.13 (0.28)
Ordering Information. Models listed include ISO G threads, automatic drain, transparent bowl and 40 µm element.
* Approximate flow at 6.3 bar (90 psig) inlet pressure and 0.3 bar (5 psig) pressure drop.
Alternative Models 0F 7 ★ ★ ★ ★★ -
★ ★
-
Port Size Substitute
1/8
"
1
1/4
"
2
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Option Substitute
Not applicable 0 Bowl Substitute
Transparent T
Metal M
Option Substitute
Not applicable 0 Element Substitute
5 µm 1
40 µm 3
Drain Substitute
Automatic A
Manual M
4 (0.157) Dia **
13 (0.5) Deep **
Automatic DrainManual Drain
37 (1.45)
23
(0.91)
19
(0.73)
23
(0.91)
42 (1.63)
154 (6.07) *
10 (0.38)
104 (4.10)
158 (6.22) *
108 (4.25)
10 (0.38)
7/97 N/AL.8.300.100.03
Dimensions mm (inches)
F07
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Bracket Mounting
Use 1/8
"
(3 mm) screws to mount bracket to wall.
* Minimum clearance to remove bowl.
** Mounting holes.
34 (1.34)
52 (2.06)
35 (1.39)
6 (0.22)
43 (1.71)
38 (1.50)
24
(0.93)
7 (0.29)
Service Kits
Item Type Part number
Service kit 5 µm element 3652-17
40 µm element 3652-18
Replacement drains Manual 773-03
Automatic 3654-02
Item Part Number
All models 5939-06
Bracket Kit Reference
Service kit includes element, element gasket, and bowl o-ring.
N/AL.8.300.100.04 7/97
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Warning
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and temperatures
can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products.
Water vapor will pass through these units and will condense into liquid
if air temperature drops in the downstream system. Install an air dryer if
water condensation could have a detrimental effect on the application.
F07
