1
Catalog DS11-TBD Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 1-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
DS11 Series High Performance Solid State Relays
DC solid state relay for loads up to 2A @ 60Vdc
Product Facts
■Standard options: short
circuit/overload protection,
switch status and trip
status.
■Optically coupled all solid
state relay.
■TTL & CMOS compatible
input.
■Low on-resistance power
MOSFET output.
■Tested per MIL-R-28750 and
approved to DSCC drawing
88062 with “Y” level
screening.
DS11 series SSRs feature
state of the art photo-voltaic
optical isolation and power
MOSFET output chips for
ultra-reliable high speed
switching of DC loads up to
2 amps, with extremely low
on-resistance. Standard
options include integral
current overload/short
circuit protection to provide
protection of the relay, load
and wiring; and isolated
switch status or trip status.
The overload feature
provides protection if a
short or overload develops
while the relay is in the on
state or if the relay is turned
on into a dead short. Switch
status, optically isolated
from the load, signals the
status of the output and
provides a logic “0” when
the output is off and a logic
“1” when the output is on.
Trip status, also optically
isolated from the load,
provides a logic “1” if the
output trips off and a logic
“0” when the output is in a
normal condition, on or off,
and is available only in
conjunction with short
circuit protection.
CII Part No. DSCC Dwg. No. Relay Version
DS11-1Y 88062-008 Basic relay
DS11-1000 88062-004 Relay w/ short circuit protection
DS11-1001 88062-006 Relay w/ switch status
DS11-1002 88062-002 Relay w/ short circuit protection and switch status
DS11-1003 N/A Relay w/ short circuit protection and trip status
2 Terminal Input Configuration
Direct Drive (Status Optional) TTL Drive
3 Terminal Input Configuration
With Output Status Without Output Status
Status Output
+V Load Supply
Load
VStatus
V
CC
INPUT OUTPUT
136
8
12
14
+V Supply
Load
V
CC
INPUT OUTPUT
TTL
136
8
12
14
Status Output
+V Load Supply
Load
VStatus
V
CC
INPUT OUTPUT
136
8
12
14
TTL or CMOS
+V Supply
Load
V
CC
INPUT OUTPUT
TTL or CMOS
136
8
12
14
2
DS11 Series High Performance Solid State Relays
DC solid state relay for loads up to 2A @ 60Vdc (Continued)
Electrical Specifications (-55°C to +105°C unless otherwise specified)
Input (2 terminal configuration)
Input supply voltage range (Vcc) 3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2)
Input current (max.) @ 5Vdc 15mAdc (Notes 1 & 2, Figures 1 & 2)
Must turn-on voltage 3.8Vdc
Must turn-off voltage 1.5Vdc
Reverse voltage protection -32Vdc
Input (3 terminal configuration)
Control voltage range 0 - 18 Vd
Control current (max.) 250µAdc @ 5V, 1mA @ 18V
Input supply voltage range (Vcc) 3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2)
Input current (max.) @ 5Vdc 15mADC (Notes 1 & 2, Figures 1 & 2)
Must turn-on voltage 0.3Vdc
Must turn-off voltage 3.2Vdc
I/O
Dielectric strength (min.) 1,000V rms
Insulation resistance (min.) @ 500Vdc 109ohms
Capacitance (max.) 10pF
Output
Continuous load current (max.) @ 25°C 2.1Adc (Figure 7)
Continuous load voltage (max.) 60Vdc
Transient blocking voltage (max.) 80Vdc (Note 5)
On resistance (max.) @ Tj= 25°C, IL= 100mA 0.15 ohm (Note 6, Figure 6)
Output voltage drop (max.) 0.5Vdc
Leakage current (max.) @ V = 60Vdc 100µAdc
Leakage current (max.) @ V = 60Vdc, with switch status 2mAdc
Turn-on time (max.) 3 ms (Figure 3)
Turn-off time (max.) 1 ms (Figure 3)
dv/dt (min.) 100V / µs
Electrical system spike 600Vdc (Note 5)
Output chip junction temperature (max.) 125°C
Thermal resistance (max.), junction to ambient 90°C/W
Thermal resistance (max.), junction to case 25°C/W
Status
Status supply voltage range 1 - 18Vdc
Status current (max.) @ Vstatus ≤0.4Vdc 600µADC (Figure 5, Note 8)
Status leakage current (max.) @ 16Vdc 10µAdc
Status turn-on time (max.) 3.5 ms (Figure 4)
Status turn-off time (max.) 8 ms (Figure 4)
Short Circuit Protection
Current surge without tripping (max.), 100ms pulse 4.25Adc
Overload trip current (max.), 0.5 ms pulse, V = 60Vdc 10Adc
Trip time (typical), turning on into short 400µs
Trip time (typical), shorting while relay is on 280µs
Environmental Characteristics
Ambient Temperature Range:
Operating: -55°C to +105°C.
Storage: -55°C to +105°C.
Vibration Resistance:
100 G’s, 10-3,000 Hz.
Shock Resistance:
50 G’s, 11 ms pulse.
Constant Acceleration Resistance
(Y1 axis):
5,000 G’s.
Catalog DS11-TBD Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 1-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Mechanical Characteristics
Weight (approx.):
.176 oz. (5 grams)
Materials:
Header: Kovar
Cover: Nickel
Pins: Kovar, gold plated
3
Figure 1 - Maximum Input Current vs. Input Voltage Figure 2 - Series Resistance vs. Vcc Supply Voltage (Note 1)
Input Voltage, Vcc (Vdc)
Input Current (mA)
18
15
12
9
6
3
0051015
20 25 30 40 50 60
Vcc (Volts)
R Series (ohms)
300
600
900
1200
1500
1800
0
0 6 10 15 20 25 30 35
DS11 Series High Performance Solid State Relays
DC solid state relay for loads up to 2A @ 60Vdc (Continued)
Catalog DS11-TBD Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 1-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Figure 5 - Status Resistor vs. Status Supply Voltage Figure 6 - On-Resistance vs. Temperature (Note 6)
Status Supply Voltage (Volts)
Status Resistor (ohms)
35000
30000
25000
20000
15000
10000
5000
00 5 10 15 20
Junction Temperature (°C)
Normalized On Resistance Factor
(NR)
0.0
25 50 75 100 125
0.2
0.4
0.6
0.8
1.2
1.0
1.4
1.6
1.8
2.0
Figure 3 - Turn-on and Turn-off Timing Figure 4 - Output Status Timing
T
T
V
V
Control
S
50%
90%
10%
Status
Turn-Off
Time
Status
Turn-On
Time
OFF
ON
4
DS11-TBD–PDF–KRG–1-04
DS11 Series High Performance Solid State Relays
DC solid state relay for loads up to 2A @ 60Vdc (Continued)
Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Notes
1.2 terminal input configuration is compatible with CMOS or open collector TTL (with pull-up resistor). For Vcc levels above 6Vdc, a series limiting resistor is
required. See Fig. 2 for resistor value. Use standard resistor value equal to or less than value from the curve.
2.Input transitions to be ≤1ms duration, and input direct drive should be “bounceless contact” type.
3. Vcc = 5Vdc for all tests unless otherwise specified.
4.All DS11 Series relays may drive loads connected to either positive or negative referenced power supply lines. Reversing polarity of output may cause permanent
damage. Inductive loads must be diode suppressed.
5.Transient blocking voltage and electrical system spike tests are performed per MIL-STD-704 (28VDC systems).
6.To determine the maximum on-resistance at any given junction temperature, multiply on-resistance at 25°C (0.15 ohm) by normalized on-resistance factor from
curve (Fig. 6).
7.Overload testing per MIL-R-28750 is constrained to the limits imposed by the short circuit protection requirements of this specification and DSCC drawing 88062.
Load circuit series inductance for “load shorted” mode of operation to be limited to 50mH max. Maximum repetition rate into a shorted load should not exceed 10
Hz.
8.Proper operation of the status feedback requires a status pull-up resistor. See Fig. 5 for status resistor value.
Figure 7 - Temperature Derating Curve
Ambient Temperature (°C)
Output Current (amps)
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
-50 -40 -20 0 20 40 60 80 100 120
Figure 9 - Outline Dimensions
.140
(3.55)
.500
(12.70)
.600
(15.24)
.300
(7.62)
.110
(2.79)
.530 MAX
(13.46)
.850 REF.
(21.59)
.273 ±.020
(6.93 ± .50)
.020 MAX.
(.50)
.190 MAX.
(4.82)
.200
(5.08)
.890 MAX.
(22.60)
.490 REF.
(12.44)
.017 +.002, –.001 DIA.
(.43 + .05, –.02)
6 PLS.
DATE CODE
HERE
TOP MARKING
ORIENT AS
SHOWN
TOLERANCE:
± 0.010 (0.25mm) FOR 2 PLACE DECIMALS,
± 0.005 (0.13mm) FOR 3 PLACE DECIMALS.
UNLESS OTHERWISE SPECIFIED
Figure 8 - Maximum Surge Current Without Tripping
Time (seconds)
Surge Current (amps)
1.0
2.0
3.0
4.0
5.0
6.0
7.0
0.01 0.1 1 10
+85°C
+25°C
-55°C