Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. RS1AFA - RS1MFA 0.8 A, 50 V - 1000 V Surface Mount Fast Recovery Rectifiers Features * * * * * * * * 2 Glass Passivated Chip Junction Fast Switching for High Efficiency High Surge Capacity Low Forward Voltage: 1.3 V Maximum UL Flammability 94V-0 Classification MSL 1 per J-STD-020 RoHS Compliant / Green Molding Compound Industrial Device Qualified per AEC-Q101 Standards * See authorized use policy 1 SOD-123FA COLOR BAND DENOTES CATHODE 1 Cathode 2 Anode Ordering Information Part Number Top Mark Package Packing Method RS1AFA RAL SOD-123FA Tape and Reel RS1BFA RBL SOD-123FA Tape and Reel RS1DFA RDL SOD-123FA Tape and Reel RS1GFA RGL SOD-123FA Tape and Reel RS1JFA RJL SOD-123FA Tape and Reel RS1KFA RKL SOD-123FA Tape and Reel RS1MFA RML SOD-123FA Tape and Reel (c) 2015 Fairchild Semiconductor Corporation RS1AFA - RS1MFA Rev. 1.0 www.fairchildsemi.com RS1AFA - RS1MFA -- 0.8 A, 50 V - 1000 V Surface Mount Fast Recovery Rectifiers October 2015 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Value Symbol Parameter RS1 AFA RS1 BFA RS1 DFA RS1 GFA RS1 JFA RS1 KFA RS1 MFA Unit 100 200 400 600 800 1000 V VRRM Repetitive Peak Reverse Voltage 50 VRMS RMS Reverse Voltage 35 70 140 280 420 560 700 V DC Blocking Voltage 50 100 200 400 600 800 1000 V VR IF(AV) IFSM TJ TSTG Average Forward Rectified Current 0.8 A Peak Forward Surge Current: 8.3 ms Single Half Sine-Wave Superimposed on Rated Load 30 A Operating Junction Temperature Range -55 to +150 C Storage Temperature Range -55 to +150 C Thermal Characteristics(1) Values are at TA = 25C unless otherwise noted. Symbol Parameter Value Unit JL Typical Thermal Characteristics, Junction-to-Lead 32 C/W RJA Typical Thermal Resistance, Junction-to-Ambient 105 C/W Note: 1. Device mounted on 5 mm x 5 mm Cu pad PCB. Electrical Characteristics Values are at TA = 25C unless otherwise noted. Symbol VF Parameter Instantaneous Forward Voltage IR Reverse Current at Rated VR CJ Junction Capacitance Trr Conditions (2) Reverse Recovery Time Max. Unit IF = 0.8 A 1.3 V TJ = 25C 5 TJ = 125C 50 VR = 4 V, f = 1 MHz IF = 0.5 A, IR = 1 A, Irr = 0.25 A Min. Typ. 10 A pF RS1AFA RS1BFA RS1DFA 150 RS1GFA RS1JFA 250 RS1KFA RS1MFA 500 ns Note: 2. Pulse test with PW = 300 s, 1% duty cycle (c) 2015 Fairchild Semiconductor Corporation RS1AFA - RS1MFA Rev. 1.0 www.fairchildsemi.com 2 RS1AFA - RS1MFA -- 0.8 A, 50 V - 1000 V Surface Mount Fast Recovery Rectifiers Absolute Maximum Ratings INSTANTANEOUS REVERSE CURRENT (A) AVERAGE FORWARD A CURRENT (A) RESISTIVE OR INDUCTIVE LOAD TJ=125oC TJ=100oC TJ=25oC LEAD TEMPERATURE (oC) Figure 2. Typical Reverse Characteristics INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) Figure 1. Forward Current Derating Curve 8.3ms Single Half Sine Wave PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Pulse Width=300s 1% Duty Cycle TJ=125oC TJ=25oC NUMBER OF CYCLES AT 60 Hz FORWARD VOLTAGE (V) Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Maximum Non-Repetitive Forward Surge Current CAPACITANCE (pF) f=1.0MHz Vsig=50mVp-p REVERSE VOLTAGE (V) Figure 5. Typical Junction Capacitance (c) 2015 Fairchild Semiconductor Corporation RS1AFA - RS1MFA Rev. 1.0 Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram www.fairchildsemi.com 3 RS1AFA - RS1MFA -- 0.8 A, 50 V - 1000 V Surface Mount Fast Recovery Rectifiers Typical Performance Characteristics 2.90 2.70 1.90 1.70 4.30 1.40 1.90 1.20 TOP VIEW 1.40 1.20 LAND PATTERN RECOMMENDATION 1.43 1.23 3.80 3.40 0.30 0.16 FRONT VIEW 0.85 0.35 2.60 2.45 1.20 0.80 BOTTOM VIEW NOTES: A. NO INDUSTRY STANDARD APPLIES TO THIS PACKAGE. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. D. DRAWING FILE NAME: MKT-MA02Drev3 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com