Ordering information DC-DC Converters PCB Mount Type SFS10 SF 1 S 2 10 3 48 4 3R3 5 B 6 1Series name 2Single output 3Output wattage 4Input voltage 48:DC36 - 76V 5Output voltage 6Mounting type (Soldering process) B :SMD(Pb-free solder) C :DIP(Pb-free solder) R SFS/SFCS MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SFS10481R2 SFS10481R5 SFS10481R8 SFS104802 SFS10482R5 SFS10483R3 SFS104805 SFS104812 SFS104815 4.2 5.25 5.4 6.0 7.5 9.9 10.0 10.8 10.5 1.2V 3.5A 1.5V 3.5A 1.8V 3A 2V 3A 2.5V 3A 3.3V 3A 5V 2A 12V 0.9A 15V 0.7A SPECIFICATIONS INPUT SFS/SFCS OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] VOLTAGE ACCURACY[%] RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] START-UP TIME[ms] OUTPUT VOLTAGE SETTING *1 OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION LOWVOLTAGE PROTECTION REMOTE ON/OFF INPUT-OUTPUT OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD SFS10481R2 SFS10481R5 SFS10481R8 SFS104802 SFS10482R5 SFS10483R3 SFS104805 SFS104812 SFS104815 DC36 - 76 0.11typ 0.13typ 0.13typ 0.15typ 0.18typ 0.23typ 0.23typ 0.26typ 0.25typ 80typ 82typ 84typ 85typ 86typ 88typ 89typ 88typ 88typ DC32 - 36 DC2 min 1.2 1.5 1.8 2 2.5 3.3 5 12 15 3.5 3.5 3 3 3 3 2 0.9 0.7 +5, -3 25max 120max 50max 150max 20 - 200max (DCIN 48V, Io=100%) t1% of rated output voltage Works over 103% of rating Works at 120 - 140% of rating Works at 90% max of rating Provided(RC open : ON, short between RC and +Vin : OFF) DC1,500V 1minute, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL (CSA60950-1), EN60950-1 38.7X5.0X27.2mm [1.52X0.197X1.07 inches] (W XHXD) /12g max Convection *1 At rated input(DC48V), rated load and 25C SFS/SFCS-2 SFS/SFCS-2 SFS_SFCS_E.indd 2 15.6.18 5:52:25 PM SFS10 External view Model 1.7 [0.067] 4.2 [0.165] P=2.547 [0.7] [0.4] 2.54 [0.1] NC PO RC ALM NC P=2.544 P=2.540.29 2.540.2 Lot No. 34.7 [1.366] NC -Vin -Vin +Vin +Vin SFS/SFCS [0.1] [0.1] [0.197] [0.024] [0.1] 2.540.2 [0.4] 0.60.1 10.16 5 max 2.17 NC [0.09] P=2.540.25 27.2 [1.07] [1.52] NC +Vout +Vout +Vout -Vout -Vout Recommended size for processing PCB (TOP VIEW) 10 min to a center (adsorption area) 38.7 [0.1] 1.SMD(Type:B) Out line Terminal part details PCB Dimensions in: Coplanarity within 0.1 0-10 39.90.6 1.30.3 mm [inch] Div.: 0.1inch [0.004] [1.57] [0.05] 2.DIP(Type:C) Model Recommended size for processing PCB (TOP VIEW) SFS/SFCS 38.7 Lot No. [0.2] [0.4] 5.08 P=2.544 P=2.544 [0.4] 2.54 [0.1] [0.1] Out line [0.3] 5 max [0.197] Stopper PO RC ALM NC 37.6 [1.480] P=2.54X3 3.5 [0.14] NC -Vin -Vin +Vin +Vin [0.1] Stopper 2.540.3 [0.1] [0.4] [0.09] 2.540.3 10.16 2.17 [0.1] P=2.540.35 27.2 [1.07] [0.024] 0.60.1 +Vout +Vout +Vout -Vout -Vout P=2.540.39 [1.52] Stopper 14- 0.9 37.60.5 [1.48] Dimensions in mm,[ ]= inches Tolerance 0.5 [0.02] Weight:12g max Dimensions in: mm [inch] Div.: 0.1inch SFS/SFCS-3 SFS/SFCS-3 SFS_SFCS_E.indd 3 15.6.18 5:52:25 PM Ordering information DC-DC Converters PCB Mount Type SFS15 SF 1 S 2 15 3 48 4 5 SFS/SFCS SFS/SFCS B 6 1Series name 2Single output 3Output wattage 4Input voltage 24:DC18 - 36V 48:DC36 - 76V 5Output voltage 6Mounting type (Soldering process) B :SMD(Pb-free solder) C :DIP(Pb-free solder) R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT 3R3 SFS15241R5 SFS15241R8 SFS15242R5 SFS15243R3 SFS152405 7.8 8.1 11.25 14.85 15.0 1.5V 5.2A 1.8V 4.5A 2.5V 4.5A 3.3V 4.5A 5V 3A SFS152412 15.0 12V 1.25A SFS152415 15.0 15V 1A SFS15241R5 SFS15241R8 SFS15242R5 SFS15243R3 SFS152405 DC18 - 36 0.39typ 0.4typ 0.54typ 0.7typ 0.69typ 83typ 85typ 87typ 89typ 90typ DC16 - 18 DC1 min 1.5 1.8 2.5 3.3 5 5.2 4.5 4.5 4.5 3 +5, -3 25max 50max 20 - 200max (DCIN 24V, Io=100%) t1% of rated output voltage Works over 103% of rating Works at 120 - 140% of rating Works at 90% max of rating Provided(RC open : ON, short between RC and +Vin : OFF) SFS152412 SFS152415 0.7typ 89typ 0.7typ 89typ 12 1.25 15 1 SPECIFICATIONS MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] INPUT START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] VOLTAGE ACCURACY[%] OUTPUT RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] START-UP TIME[ms] OUTPUT VOLTAGE SETTING *1 OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION CIRCUIT AND LOWVOLTAGE PROTECTION OTHERS REMOTE ON/OFF MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT 120max 150max SFS15481R2 SFS15481R5 SFS15481R8 SFS154802 SFS15482R5 SFS15483R3 SFS154805 SFS154812 SFS154815 6.24 7.8 8.1 9.0 11.25 14.85 15.0 15.0 15.0 1.2V 5.2A 1.5V 5.2A 1.8V 4.5A 2V 4.5A 2.5V 4.5A 3.3V 4.5A 5V 3A 12V 1.25A 15V 1A SPECIFICATIONS MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] INPUT START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] VOLTAGE ACCURACY[%] RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] START-UP TIME[ms] OUTPUT VOLTAGE SETTING *1 OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION CIRCUIT AND LOWVOLTAGE PROTECTION OTHERS REMOTE ON/OFF SFS15481R2 SFS15481R5 SFS15481R8 SFS154802 SFS15482R5 SFS15483R3 DC36 - 76 0.16typ 0.2typ 0.2typ 0.22typ 0.27typ 0.35typ 82typ 83typ 85typ 86typ 87typ 89typ DC32 - 36 DC2 min 1.2 1.5 1.8 2 2.5 3.3 5.2 5.2 4.5 4.5 4.5 4.5 +5, -3 25max 50max 20 - 200max (DCIN 48V, Io=100%) t1% of rated output voltage Works over 103% of rating Works at 120 - 140% of rating Works at 90% max of rating Provided(RC open : ON, short between RC and +Vin : OFF) SFS154805 SFS154812 SFS154815 0.35typ 90typ 0.35typ 89typ 0.35typ 89typ 5 3 12 1.25 15 1 120max 150max SFS/SFCS-4 SFS/SFCS-4 SFS_SFCS_E.indd 4 15.6.18 5:52:26 PM SFS15 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT SAFETY AGENCY APPROVALS CASE SIZE/WEIGHT OTHERS COOLING METHOD DC1,500V 1minute, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL (CSA60950-1), EN60950-1 38.7X5.0X27.2mm [1.52X0.197X1.07 inches] (WXHXD) /12g max Convection *1 At rated input(DC24V, DC48V), rated load and 25C External view Model P=2.547 [0.7] [0.4] 2.54 [0.1] NC PO RC ALM NC SFS/SFCS 4.2 [0.165] 1.7 [0.067] NC -Vin -Vin +Vin +Vin P=2.544 P=2.540.29 2.540.2 Lot No. 34.7 [1.366] [0.1] [0.1] [0.197] [0.024] [0.1] 2.540.2 [0.4] 0.60.1 10.16 5 max 2.17 NC [0.09] P=2.540.25 27.2 [1.07] NC +Vout +Vout +Vout -Vout -Vout Recommended size for processing PCB (TOP VIEW) 10 min to a center (adsorption area) 38.7 [1.52] [0.1] 1.SMD(Type:B) Out line Terminal part details PCB Dimensions in: Coplanarity within 0.1 0-10 39.90.6 1.30.3 mm [inch] Div.: 0.1inch [0.004] [1.57] SFS/SFCS [0.05] 2.DIP(Type:C) Model Recommended size for processing PCB (TOP VIEW) 38.7 Lot No. [0.2] [0.4] 5.08 P=2.544 P=2.544 [0.4] 2.54 [0.1] [0.1] Out line [0.3] 5 max [0.197] Stopper PO RC ALM NC 37.6 [1.480] P=2.54X3 3.5 [0.14] NC -Vin -Vin +Vin +Vin [0.1] Stopper 2.540.3 [0.1] [0.4] [0.09] 2.540.3 10.16 2.17 [0.1] P=2.540.35 27.2 [1.07] [0.024] 0.60.1 +Vout +Vout +Vout -Vout -Vout P=2.540.39 [1.52] Stopper 14- 0.9 37.60.5 [1.48] Dimensions in mm,[ ]= inches Tolerance 0.5 [0.02] Weight:12g max Dimensions in: mm [inch] Div.: 0.1inch SFS/SFCS-5 SFS/SFCS-5 SFS_SFCS_E.indd 5 15.6.18 5:52:27 PM Ordering information DC-DC Converters PCB Mount Type SFS20 SF 1 S 2 20 3 48 4 3R3 5 B 6 1Series name 2Single output 3Output wattage 4Input voltage 48:DC36 - 76V 5Output voltage 6Mounting type (Soldering prosess) B :SMD(Pb-free solder) C :DIP(Pb-free solder) R SFS/SFCS MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SFS20481R5 13.5 1.5V 9A SFS20481R8 14.4 1.8V 8A SFS20482R5 17.5 2.5V 7A SFS20483R3 19.8 3.3V 6A SFS204805 20.0 5V 4A SPECIFICATIONS INPUT SFS/SFCS OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] VOLTAGE ACCURACY[%] RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] START-UP TIME[ms] OUTPUT VOLTAGE SETTING *1 OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION LOWVOLTAGE PROTECTION REMOTE ON/OFF INPUT-OUTPUT OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD SFS20481R5 SFS20481R8 SFS20482R5 SFS20483R3 SFS204805 DC36 - 76 0.33typ 0.35typ 0.41typ 0.46typ 0.46typ 86typ 85typ 88typ 90typ 90typ DC32 - 36 DC2 min 1.5 1.8 2.5 3.3 5 9 8 7 6 4 +5, -3 50max 50max 20 - 200max (DCIN 48V, Io=100%) +2, -1% of rated output voltage Works over 103% of rating Works at 115 - 145% of rating Works at 95% max of rating Provided(RC open : ON, short between RC and +Vin : OFF) DC1,500V 1minute, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL(CSA60950-1), EN60950-1 38.7X5.0X27.2mm [1.52X0.197X1.07 inches] (WXHXD) /12g max Convection/Forced air *1 At rated input(DC48V), rated load and 25C SFS/SFCS-6 SFS/SFCS-6 SFS_SFCS_E.indd 6 15.6.18 5:52:29 PM SFS20 External view Model 1.7 [0.067] 4.2 [0.165] P=2.547 [0.7] [0.4] 2.54 [0.1] NC PO RC ALM NC P=2.544 P=2.540.29 2.540.2 Lot No. 34.7 [1.366] NC -Vin -Vin +Vin +Vin SFS/SFCS [0.1] [0.1] [0.197] [0.024] 2.540.2 [0.4] 0.60.1 [0.09] [0.1] 5 max 10.16 NC 2.17 P=2.540.25 27.2 [1.07] [1.52] NC +Vout +Vout +Vout -Vout -Vout Recommended size for processing PCB (TOP VIEW) 10 min to a center (adsorption area) 38.7 [0.1] 1.SMD(Type:B) Out line Terminal part details PCB Dimensions in: Coplanarity within 0.1 0-10 39.90.6 1.30.3 mm [inch] Div.: 0.1inch [0.004] [1.57] [0.05] 2.DIP(Type:C) Model Recommended size for processing PCB (TOP VIEW) SFS/SFCS 38.7 [0.197] Lot No. [0.2] [0.4] 5.08 P=2.544 P=2.544 [0.4] 2.54 [0.1] [0.1] Out line [0.3] 5 max Stopper PO RC ALM NC 37.6 [1.480] P=2.54X3 3.5 [0.14] NC -Vin -Vin +Vin +Vin [0.1] Stopper 2.540.3 [0.1] [0.4] [0.09] 2.540.3 10.16 2.17 [0.1] P=2.540.35 27.2 [1.07] [0.024] 0.60.1 +Vout +Vout +Vout -Vout -Vout P=2.540.39 [1.52] Stopper 14- 0.9 37.60.5 [1.48] Dimensions in mm,[ ]= inches Tolerance 0.5 [0.02] Weight:12g max Dimensions in: mm [inch] Div.: 0.1inch SFS/SFCS-7 SFS/SFCS-7 SFS_SFCS_E.indd 7 15.6.18 5:52:29 PM Ordering information DC-DC Converters PCB Mount Type SFS30 SF 1 S 2 30 3 48 4 5 SFS/SFCS SFS/SFCS B 6 1Series name 2Single output 3Output wattage 4Input voltage 24:DC18 - 36V 48:DC36 - 76V 5Output voltage 6Mounting type (Soldering process) B :SMD(Pb-free solder) C :DIP(Pb-free solder) R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT 3R3 SFS30241R2 SFS30241R5 SFS30241R8 SFS30242R5 SFS30243R3 SFS302405 SFS302412 SFS302415 12.48 15.6 16.2 22.5 29.7 30.0 30.0 30.0 1.2V 10.4A 1.5V 10.4A 1.8V 9A 2.5V 9A 3.3V 9A 5V 6A 12V 2.5A 15V 2A SPECIFICATIONS MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] INPUT START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] VOLTAGE ACCURACY[%] OUTPUT RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] START-UP TIME[ms] OUTPUT VOLTAGE SETTING *1 OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION CIRCUIT AND LOWVOLTAGE PROTECTION OTHERS REMOTE ON/OFF MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SFS30241R2 SFS30241R5 SFS30241R8 SFS30242R5 SFS30243R3 DC18 - 36 0.74typ 0.60typ 0.76typ 1.04typ 1.36typ 87.5typ 89typ 90typ 91typ 86.5typ DC16 - 18 DC1 min 1.5 1.2 1.8 2.5 3.3 10.4 10.4 9 9 9 +5, -3 25max 50max 20 - 200max (DCIN 24V, Io=100%) t1% of rated output voltage Works over 103% of rating Works at 120 - 140% of rating Works at 90% max of rating Provided(RC open : ON, short between RC and +Vin : OFF) SFS302405 SFS302412 SFS302415 1.36typ 92typ 1.36typ 92typ 1.39typ 90typ 5 6 12 2.5 15 2 120max 150max SFS30481R2 SFS30481R5 SFS30481R8 SFS304802 SFS30482R5 SFS30483R3 SFS304805 SFS304810 SFS304812 SFS304815 12.48 15.6 16.2 18.0 22.5 29.7 30.0 30.0 30.0 30.0 1.2V 10.4A 1.5V 10.4A 1.8V 9A 2V 9A 2.5V 9A 3.3V 9A 5V 6A 10V 3A 12V 2.5A 15V 2A SPECIFICATIONS MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] INPUT START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] VOLTAGE ACCURACY[%] RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] START-UP TIME[ms] OUTPUT VOLTAGE SETTING *1 OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION CIRCUIT AND LOWVOLTAGE PROTECTION OTHERS REMOTE ON/OFF SFS30481R2 SFS30481R5 SFS30481R8 SFS304802 SFS30482R5 SFS30483R3 DC36 - 76 0.30typ 0.37typ 0.38typ 0.42typ 0.52typ 0.67typ 86typ 87.5typ 89typ 89typ 91typ 92typ DC32 - 36 DC2 min 1.2 1.5 1.8 2 2.5 3.3 10.4 10.4 9 9 9 9 +5, -3 25max 50max 20 - 200max (DCIN 48V, Io=100%) t1% of rated output voltage Works over 103% of rating Works at 120 - 140% of rating Works at 90% max of rating Provided(RC open : ON, short between RC and +Vin : OFF) SFS304805 SFS304810 SFS304812 SFS304815 0.68typ 92.5typ 0.69typ 91typ 0.68typ 92typ 0.68typ 92typ 5 6 10 3 12 2.5 15 2 120max 150max SFS/SFCS-8 SFS/SFCS-8 SFS_SFCS_E.indd 8 15.6.18 5:52:31 PM SFS30 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT SAFETY AGENCY APPROVALS CASE SIZE/WEIGHT OTHERS COOLING METHOD DC1,500V 1minute, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (SMD:Refer to the Instruction Manual) 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL (CSA60950-1), EN60950-1 38.7X8.0X31.2mm [1.52X0.315X1.23 inches] (W XHXD) /20g max Convection/Forced air *1 At rated input(DC24V, DC48V), rated load and 25C External view SFS/SFCS 2.54 0.2 NC PO RC ALM NC 1.7 [0.067] 4.2 [0.165] P=2.547 [0.7] [0.024] NC -Vin -Vin +Vin +Vin 34.7 [1.366] [0.1] P=2.540.29 10 min to a center (adsorption area) [0.1] 0.6 0.1 [0.4] 4.17 10.16 NC [0.16] 0.2 5 [0.1] P=2.54 [1.23] 31.2 2.54 0.2 [1.52] [0.1] 38.7 NC +Vout +Vout +Vout -Vout -Vout Recommended size for processing PCB (TOP VIEW) Model P=2.544 [0.4] 2.54 [0.1] 1.SMD(Type:B) Lot No. 8 max Out line [0.315] Terminal part details PCB Dimensions in: Div.: 0.1inch 39.9 0.6 0~10 1.3 0.3 mm [inch] Coplanarity within 0.1 [1.57] SFS/SFCS [0.004] [0.05] 2.DIP(Type:C) Model Recommended size for processing PCB (TOP VIEW) 38.7 [1.52] 37.6 [1.480] 5.08 P=2.544 [0.2] [0.4] P=2.544 [0.4] 2.54 [0.1] [0.1] P=2.54 0.39 Stopper PO RC ALM NC P=2.543 [0.3] 3.5 8max [0.14] [0.315] 2.54 0.3 Stopper NC -Vin -Vin +Vin +Vin [0.1] [0.1] [0.4] [0.16] [0.1] 2.54 0.3 10.16 4.17 P=2.54 0.3 5 31.2 [0.024] 0.6 0.1 +Vout +Vout +Vout -Vout -Vout [1.23] Stopper Lot No. Out line 14- 0.9 37.6 0.5 Dimensions in mm,[ ]= inches Tolerance 0.5 [0.02] Weight:20g max Dimensions in: Div.: mm [inch] 0.1inch [1.48] SFS/SFCS-9 SFS/SFCS-9 SFS_SFCS_E.indd 9 15.6.18 5:52:31 PM