This document was generated on 04/02/2019 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: Status: 0622009000 Active Overview: Description: Application Tooling Micro-D Backshell Crimp Tool Kit, 9 Circuits Documents: RoHS Certificate of Compliance (PDF) General Product Family Series Comments Function Geographic Area Level of Automation More Detailed Tech Information Overview Product Name Tool Type UPC Warranty Disclaimer Application Tooling 207129 This tool kit is intended for use in the Basic Arbor Press. See Tooling Specification (PDF) Above, This tool kit is intended for use in the Basic Arbor Press. See Tooling Specification (PDF) Above Crimp Global Manual applicationtooling@molex.com Application Tooling N/A Hand Crimp Tool 800754012676 CAUTION: Molex tooling crimp specifications are valid only when used with Molex terminals and tooling manufactured by Molex and sold by Molex or authorized distributors ("Molex Tooling"). When using tooling other than Molex Tooling with Molex specific connector systems listed in our ATS documents, the Molex tooling qualification does not apply and the responsibility for full qualification of the connector system is that of the customer. Molex accepts no liability for connector performance or tooling support where tooling other than Molex Tooling is used or where Molex Tooling is modified. Material Info Reference - Drawing Numbers Application Tooling Documents ATS-622008900, ATS-622009000 Series image - Reference only EU ELV Not Relevant EU RoHS China RoHS Not Relevant REACH SVHC Not Relevant Halogen-Free Status Not Relevant For more information, please visit Contact US China ROHS ELV RoHS Phthalates Not Relevant Not Relevant Not Relevant Search Parts in this Series 207129 Series Use With 622019800 Application Tooling | FAQ Description Product # 1.27mm Pitch 834219014 Commercial Micro D, Cable Receptacle Kit, 9 Circuits This document was generated on 04/02/2019 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION