SK62L
THRU
SK610L
6 Amp Schottky
Rectifier
20 to 100 Volts
Features
• For Surface Mount Applications
• Easy Pick And Place
• High Current Capability With Low Forward Voltage
• High Temp Soldering: 260°C for 10 Seconds At Terminals
MCC
Part
Number Device
Marking
Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS
Voltage
Maximum
DC
Blocking
Voltage
SK62L SK62 20V 14V 20V
SK63L SK63 30V 21V 30V
SK64L SK64 40V 28V 40V
SK645L SK645 45V 31.5V 45V
SK65L SK65 50V 35V 50V
SK66L SK66 60V 42V 60V
SK68L SK68 80V 56V 80V
SK610L SK610 100V 70V 100V
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current IF(AV) 6.0A TJ = 120°C
Peak Forward Surge
Current IFSM 150A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
SK62L-645L
SK65L-610L VF
.65V
.85V IFM = 6.0A;
TJ = 25°C*
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
IR 1.0mA
20mA TJ = 25°C
TJ = 100°C
Typical Junction
Capacitance CJ 200pF Measured at
1.0MHz, VR=4.0V
*Pulse test: Pulse width 200 µsec, Duty cycle 2%
omponents
20736 Marilla Street Chatsworth

 !"#
$% !"#
MCC
0.070”
0.190"
0.125”
SUGGESTED SOLDER
PAD LAYOUT
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .079 .103 2.00 2.62
B .108 .128 2.75 3.25
C .002 .008 0.051 0.203
D .006 .012 0.152 0.305
E .030 .050 0.76 1.27
F ..305 .320 7.75 8.13
G .260 .280 6.60 7.11
H .220 .245 5.59 6.22
G
H
E
D
F
A
B
C
DO-214AB
(SMC) (LEAD FRAME)
TM
Micro Commercial Components
www.mccsemi.com
1 of 4
Revision: B 2013/01/01
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1
• Operating Temperature: -55°C to +150°C
• Storage Temperature: -55°C to +150°C
• Maximum Thermal Resistance; 18°C/W Junction To Lead
Maximum Ratings
• Halogen free available upon request by adding suffix "-HF"
Average Forward Rectified Current - Amperes versus
Ambient Temperature - °C
Figure 2
Forward Derating Curve
60
80 120 140 160 180
0
2
3
Single Phase, Half Wave
60Hz Resistive or Inductive Load
Amps
°C
100
4
6
Figure 3
Junction Capacitance
.1 .2
1 .4 2 10 20 404 100 200
10
20
60
100
200
100
0
pF
Volts
600
400
40
400 1000
TJ=25°C
Figure 1
Typical Forward Characteristics
Instantaneous Forward Current - Amperes versus
Instantaneous Forward Voltage - Volts
Volts
40
60
200
100
Amps
.2 1.2 .4 .6 .8 1.0
.1
.2
.4
.6
1
2
4
6
10
20
25°C
400
600
1000
1.4
SK62L -SK645L
SK65L-SK610
L
MCC
SK62L thru SK610L
Junction Capacitance - pF versus
Reverse Voltage - Volts
TM
Micro Commercial Components
www.mccsemi.com
2 of 4
Revision: B 2013/01/01
Figure 4
Typical Reverse Characteristics
Instantaneous Reverse Leakage Current - MicroAmperes versus
Percent Of Rated Peak Reverse Voltage - Volts
Volts
.4
.6
2
1
µAmps
20
120 40
60 80 100
.001
.002
.004
.006
.01
.02
.04
.06
.1
.2 25°C
4
6
10
140
1 100
4
0
25
50
75
8
Figure 5
Peak Forward Surge Current
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
Amps
Cycles
10
20
60
80
40
100
125
150
SK62L -645L
SK65L -610L
MCC
SK62L thru SK610LTM
Micro Commercial Components
www.mccsemi.com
3 of 4
Revision: B 2013/01/01
MCC TM
Micro Commercial Components
www.mccsemi.com
4 of 4
Revision: B 2013/01/01
Device Packing
Part Number-TP Tape&Reel: 3Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF