1
Meet requirements of USB 2.0
UX Series
NEW
2002.11
Features
1.
Certified to perform as required in USB 2.0 Standard
Tested and certified by USB Association approved laboratory the
connectors will perform at transmission speeds up to 480Mbps.
2. Designed for Low Skew performance
The distance between twisted pairs conductors (i.e.,
contact nos. 2 and 3) is of equal electrical length, for
receptacle and plug, resulting in zero theoretical skew.
3.
Controlled Termination of Individual Conductors
The termination part of the contact is firmly attached in the molded
insulator body. Hirose’s Electric unique design of the metal shield
prevents short circuits, allowing the overmold resin to flow in the
terminated area.
By not using heat shrinkable tubing (or any other additional process),
the non-twisted part of the conductors is very short, suppressing any
unwanted impedance disturbances in the termination area.
4. Ease of mating and handling
Thin design of the plug assembly and the overmold section allows use
in small spaces.
The plug also incorporates a build-in snap-lock feature, providing
tactile verification of the full and secure mating of plug and receptacle.
5. Two types of metal shields
Two styles of the receptacle metal shield are available,
depending on the customer’s PCB design requirement:
-Surface Mount Termination
-Solder Dip Type
6. Printed Circuit Board placement features
Precise location on the board can be accomplished using
receptacle assemblies with or without the positioning boss.
7.
Board placement with Automatic Equipment
Receptacle assemblies are provided with a heat resistant flat surfaces, removable after completion of the
soldering process and are supplied on the reels.
8. Environmental considerations
Plating is lead-free in order to protect environment.
9. Support of Non-halogen Cable
Wiring harness can be arranged in non-halogen cable types.
Note: Non-halogen items are not covered in the current USB 2.0 Standard.
Applications
Personal and mobile computer peripheral equipment, data terminals, digital cameras, MP3 players, PDA’s, GPS
and other devices utilizing standard USB protocols
Contact No. 3
Contact No. 2
2
Materials
Note 1: The over-mold compound is applied at the time of the termination of the plug with the cable and can not be ordered as a separate part.
Note 2: The over-molding and cables can be supplied in a wide range of colors.
Please contact your Hirose Electric account representative for details.
Plugs
Receptacles
Measured at 100 mA
Measured at 100 V DC
100 V AC / one minute
Measured at 1000 ± 10Hz between adjacent contacts
With corresponding connector.
5000 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Frequency: 50 to 2000 Hz, 15 minutes in each of the 3 axis.
Acceleration of 490 m/s2, 11 ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis
168 hours at -10
ç
to +65
ç
and Relative Humidity of 90% to 98%
7 cycles
Exposed to 5% salt water solution for 48 hours
Soldering temperature: 245
ç
Recommended solder immersion time: 2 to 3 seconds
50 m ohms max.
100 M ohms min.
No flashover or insulation breakdown
2 PF min.
Mating : 35N max.
Un-mating : 7N min.
Contact resistance: 70 m ohms max.
Un-mating force: 3N min.
No electrical discontinuity of 1 ms or more
No electrical discontinuity of 1 ms. min.
No electrical discontinuity of 1 ms. min.
Contact resistance: 70 m ohms max.
Insulation resistance: 10 M ohms min. (Dry state)
Contact resistance: 70 m ohms max.
Wet state, with solder coverage area over 95%
1.Contact resistance
2.Insulation resistance
3.
Dielectric
Withstanding Voltage
4.Capacitance
5.
Mating/un-mating forces
6.Durability
(mating / un-mating)
7.Vibration
8.Shock
9.Shock
10.Thermal shock
11.Humidity
12.Salt Spray
13.Solderability
Item Specification Conditions
Part
Insulator
Contacts
Metal shield
Pick-and-place flat plate
Synthetic resin
Copper alloy
Copper alloy
Polyamide
Color: Black
Contact area: Gold plating
Termination area: Tin alloy plating
Tin alloy plating
---------------
UL94V-0
---------------
---------------
---------------
Material Finish Remarks
Product Specifications
Ratings Current rating 1 A
Voltage rating 5 V AC Operating temperature range -30çto +75ç
Temperature: -55
ç
/
+20
ç
to +35
ç
/
+85
ç
/
+20
ç
to
+35
ç
Time: 30
/
2 to 3
/
30
/
2 to 3 (Minutes)
10 cycles
Part
Insulator
Contacts
Metal shield
Over-mold compound (Note 1)
Synthetic resin
Copper alloy
Steel
PVC
Color: Black
Contact area: Gold plating
Termination area: Tin alloy plating
Tin alloy plating
Black (Note 2)
UL94V-0
---------------
---------------
---------------
Material Finish Remarks
3
Ordering information
UX 60 A - MB - 5 S T
1 2 4 53 6 7
Note 1: Types with different dip style termination lengths can also be provided.
Note 2: Various cable lengths can be provided.
Note 3: Detailed specifications of the harness items can be supplied.
Please contact your Hirose Electric account representative for details.
Series name UX
Contact wiring 60: SMT type
40: Solder wiring type
Receptacle serial indication A: Without positioning post
Connector type MB: Mini B type
Number of contacts 5
Contact type S: Female contact P: Male contact
Metal shield termination T: SMT type
8: Solder dip type (Dip length 0.8) (Note 1)
Plug serial indication A: Type supporting thick cable
Reverse side connector type A: Standard A type
Cable length 1000: 1000 mm (Note 2)
Serial number (Note 3)
1
2
3
4
5
6
7
8
9
10
11
Receptacles
UX 40 A - MB - 5 P
1 2 4 5
86
Plugs
UX 40 A - MB - 5 P A - 1000 - 1001
1 2 4
10 11
5
86 9
Plug Harnesses
4
9
0.3
0.8
1.6
0.8
1.6
7.7
9.9
CONTACT No.5CONTACT No.1
3.5
3.950.5
0.8
1.2
23.3
1.2
6.4
8.4
3.3 2
1.25
0.4 max.
3.25
3.5
6.4 min.
8.4
0.80.8 1.61.6
0.5
No conductive traces
7.7min.
2.2
2.5
3.5min.
Dia. 0.9 mm hole
Connector
outside diameter
B
Recommended Board Mounting Pattern
Receptacles
Metal Shield SMT Type With Positioning Post
Part No. CL No.
UX60-MB-5ST 240-0001-9
9
0.3
0.8
1.6 1.6
0.8
7.7
9.9
3.95
CONTACT No.5CONTACT No.1
1.2
3.1
8.4
1.2
8.4
3.1
8.4
7.65
6 min.
9.65
8.4
0.80.8 1.61.6
0.5
No conductive traces
7.7min.
2.2
2.5
3.5 min.
Connector
outside diameter
B
Recommended Board Mounting Pattern
Metal Shield SMT Type Without Positioning Post
Note : Embossed tape reel packaging(1,000 pieces/reel)
Order by the number of reels.
Part No. CL No.
UX60A-MB-5ST 240-0003-4
Note : Embossed tape reel packaging(1,000 pieces/reel)
Order by the number of reels.
5
Part No. CL No.
UX60-MB-5S8 240-0002-1
Note : Embossed tape reel packaging(1,000 pieces/reel)
Order by the number of reels.
9
0.3
0.8
1.6
0.8
1.6
7.7
3.950.5
3.5
7.3
0.8
CONTACT No.5
CONTACT No.1
0.8
1.21.2
23.3
6.4
3.5 min.
0.4 max.
Dia.
0.9mm hole
7.3
0.80.8 1.61.6
0.5
0.8(Through hole)
1.7(Through hole)
R0.4 (Through hole)
3.5
7.3
No conductive traces
Connector
outside diameter
3.3 2
1.25
3.256.4 min.
7.7min.
B
Recommended Board Mounting Pattern
Receptacles
Metal Shield Dip Type With Positioning Post
( 2 )
( 1.5 )
( 25.4 )
2.3 mni.
1 min.
4.9
0.35 min.
0.65 mni.
1.1 max.
5.6 mni.
BDrawing of Mated Assembly - Shown for Reference
BReceptacle - recommended clearance area
When considering the placement of the receptacle assembly areas indicated should be free of any materials or components which
may interfere with the free movement of the ground contact.
6
Note: Recommended cable diameters. Actual diameters may vary due to manufacturing process variations.
Contact Hirose for recommendations when using cables with different diameters than the recommended.
Part No.
UX40-MB-5P
UX40A-MB-5P
240-0004-7
240-0005-0
6.2
7.85
6.95
7.85
Ø3.5~4.0
Ø4.1~4.6
CL No. Dimension A Dimension B Applicable Cable (Note)
7.45
3
22.7
3
14.4
( 0.5 ) ( 0.2 )
(A)
B
CONTACT No.1
CONTACT No.5
(2.4)
(0.75)
1.2
2.4
1.2
2.4
Connector Unit
Plugs
Assembly Components
(non-terminated, without overmold)
Plug Harnesses
( 8.2 )
( 16.2 )
( 55 )
( Ø3.9 )
( 30.9 )
1000
( 9.5 )
( 6.5 )
B
Part No. CL No.
UX40-MB-5PA-1000-2003 240-2003-5
7
BReceptacles Packaging Specification
Note: Embossed tape reel packaging(1,000 pieces/reel) Order by the number of reels.
BRecommended Temperature Profile (Receptacles)
Embossed Carrier Tape Dimensions
Recommended Conditions
Reflow : IR
Solder: Paste, 96.5 Sn/3.0 Ag/0.5 Cu
Test board:
Glass epoxy 35mm35mm0.8 mm thick.
(
Ø13 )
(
Ø380 )
Unreeling direction
( 24.4 )
( 30.4 )
Reel Dimensions
Average slope
2ç/sec.
(85ç)
170±10ç
80~110S
230ç min.
max. 50S
200ç min.
max. 80S
Temperature (ç)
250
230
200
170
Time (sec.)
0