Thick Film, Rectangular Resistor/Capacitor Chip
www.vishay.com For technical questions contact: ff2aresistors@vishay.com Document Number: 31045
128 Revision: 05-Oct-05
CRCC
Vishay Dale
FEATURES
•Single component reduces board space and
component counts
•Choice of Dielectric Characteristics X7R or Y5U
•Wrap around termination
•Thick film Resistor/Capacitor element
•Inner electrode protection
•Flow & Reflow solderable
•Automatic placement capability, standard size
•Lead (Pb)-Free version is RoHS Compliant
•Packaging: see appropriate catalog or web page
•Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
SIZE RESISTOR CAPACITOR
INCH METRIC
POWER RATING
P
70°C
W
TEMPERATURE
COEFFICIENT
ppm/°C
TOL
%
VALUE
RANGE
Ω
DIELECTRIC
TEMPERATURE
COEFFICIENT
%
TOL.
%
VOLTAGE
RATING
VDC
VALUE
RANGE
pF
CRCC1206 1206 3216 0.125 200 5 10R – 1M0 X7R ± 15 20 50 10 - 270
CRCC1206 1206 3216 0.125 200 5 10R – 1M0 Y5U + 22, - 56 20 50 270 – 1800
RESISTOR
• Operating Temperature Range: - 55°C to + 125°C
• Technology: thick film
CAPACITOR
• Operating Temperature Range: X7R - 55°C to + 125°C
Y5U - 30°C to + 85°C
• Maximum Dissipation Factor: 2.5%
TECHNICAL SPECIFICATIONS
PARAMETER UNIT RESISTOR X7R CAPACITOR Y5U CAPACITOR
Rated Dissipation at 70°C W 0.125 – –
Capacitor Voltage Rating V –5050
Dielectric Withstanding Voltage
(5 seconds, 50mA Charge) Vdc – 125 125
Category Temperature Range °C - 55 / + 155 - 55 / + 125 - 30 / + 85
Insulation Resistance Ω> 10 10 > 10 10 > 10 10
Weight / 1000 pieces g 0.65 2 5.5
GLOBAL MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE (pF) CAP. TOLERANCE PACKAGING
CRCC1206 2 digit significant figure, F = ± 1% 2 digit significant figure, K = ± 10% EA = Lead Free, T/R (4000 pcs)
followed by a multiplier G = ± 2% followed by a multiplier M = ± 20% TF = Tin/Lead, T/R (4000 pcs)
100 = 10ΩJ = ± 5% 100 = 10pF
683 = 68KΩ271 = 270pF
105 = 1.0MΩ182 = 1800pF
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format)
CRCC1206472J220MTF
Historical Part Number example: CRCC1206472J220MR02 (will continue to be accepted)
CRCC1206 472 J 220 M R02
MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE CAP. TOLERANCE PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
Available
RoHS*
COMPLIANT
e3
Document Number: 31045 For technical questions contact: ff2aresistors@vishay.com www.vishay.com
Revision: 05-Oct-05 129
CRCC
Thick Film, Rectangular, Resistor/Capacitor Chip Vishay Dale
DIMENSIONS
SIZE DIMENSIONS [in millimeters]
INCH METRIC L W H T1 T2
1206 3216 3.2 ± 0.15 1.6 ± 0.15 0.55 ± 0.15 0.5 ± 0.25 0.5 ± 0.25
SIZE
SOLDER PAD DIMENSIONS
[in millimeters]
REFLOW SOLDERING WAVE SOLDERING
INCH METRIC a b l a b l
1206 3216 0.9 1.7 2.0 1.1 1.7 2.2
PERFORMANCE
TEST CONDITIONS OF TEST TEST RESULTS
RC
Endurance Test at 70°C
MIL-Std-202 Method 108 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" ± (5% + 2Ω) ± 20%
Dielectric Withstanding Voltage
MIL-Std-202 Method 301 125Vdc, 5 seconds, 50mA charge no physical damage
Thermal Shock
MIL-Std-202 Method 107 100 cycles, - 55 to + 125°C ± (5% + 2Ω) ± 20%
Moisture
MIL-Std-202 Method 106 Omit steps 7A and B ± (5% + 2Ω) ± 20%
Resistance to Soldering Heat
EIA 575 10 seconds at 260°C solder bath temperature ± (5% + 2Ω) ± 20%
High Temperature Exposure
EIA 575 125°C for 100 hours ± (5% + 2Ω) ± 20%
Low Temperature Operation
EIA 575 1 hour at - 55°C then 45 minutes at 50V ± (5% + 2Ω) ± 20%
Solderability & Leaching
EIA 575 3.12 Condition C 95% Coverage
APPLICABLE SPECIFICATIONS
• IPC Standards
• EIA 575
Derating
-55 -25 0 25 50 75 100 125 150 175
120
100
80
60
40
20
0
Ambient Temperature in °C
70
Rated Power in %
SCHEMATIC
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
