1
PerFormanCe POWER PFC375
The PFC375 products of the PerFormanCe Power series incorporate
high performance midrange power, active Power Factor Correction
(PFC), and high reliability to meet varied commercial and industrial
requirements.
Providing tightly regulated DC power in a wide variety of single and
multiple output configurations, the PFC375 is designed to provide full
output power with only 300 Linear Feet per Minute (LFM) forced air
cooling (factory installed fan optional). Other features include remote
sense, power fail, logic level inhibit, DC power good. Main channel
current sharing is provided for redundant applications. The PFC375
is available with SAE mountings or optional metric mountings.
The PFC375 product line is approved to the latest international
regulatory standards, and displays the CE Mark.
FEATURES
• Power Factor Correction (PFC) Meets EN61000-3-2
• Fully Regulated Outputs
• Main Output Remote Sense
• Current Share, Power Fail, and Power Good Signals
• Overtemperature, Overvoltage, and Overcurrent Protected
• Available with Metric and SAE Mountings
• Input Transient & ESD Compliance to EN61000-4-2/-3/-4/-5
• Fan Output Voltage and Optional Fan
MULTIPLE OUTPUT MODEL SELECTION CHART - ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS
MODEL OUTPUT ADJUSTMENT OUTPUT PEAK OUTPUT LINE LOAD RIPPLE & NOISE INITIAL SETTING
VOLTAGE RANGE CURRENT (NOTE 1) CURRENT (NOTE 2) REGULATION REGULATION %p-p (NOTE 3) ACCURACY
+5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V
PFC375-3000 +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V
12V 11.3V to 12.6V 6A 10A 0.9% 0.9% 1% 11.9V to 12.1V
+5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V
PFC375-3001 +15V 14.2V to 15.8V 10A 16A 0.7% 0.7% 1% 14.9V to 15.1V
15V 14.2V to 15.8V 6A 10A 0.7% 0.7% 1% 14.9V to 15.1V
+5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V
PFC375-3002 +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V
5V 4.5V to 5.5V 6A 6A 0.4% 1% 1% 4.98V to 5.02V
+5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V
PFC375-3004 +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V
24V 22.0V to 28.0V 3A 3A 0.5% 0.8% 1% 23.8V to 24.2V
+5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V
PFC375-4000 +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V
12V 11.3V to 12.6V 6A 6A 0.9% 0.9% 1% 11.9V to 12.1V
5V 4.9V to 5.1V 3A 3A 2% 2% 2.4% 4.9V to 5.1V
SINGLE OUTPUT MODEL SELECTION CHART
MODEL OUTPUT ADJUSTMENT MAXIMUM OUTPUT LINE LOAD RIPPLE & NOISE INITIAL SETTING
VOLTAGE RANGE CURRENT (NOTE 1) REGULATION REGULATION %p-p (NOTE 2) ACCURACY
PFC375-1012 12V 10.8V to 13.5V 30A 0.2% 0.8% 1% 11.94V to 12.06V
PFC375-1015 15V 12.0V to 17.0V 25A 0.2% 0.6% 1% 14.94V to 15.06V
PFC375-1024 24V 21.6V to 26.4V 15A 0.5% 0.8% 1% 23.88V to 24.12V
PFC375-1028 28V 25.2V to 30.8V 13.4A 0.5% 0.9% 0.9% 27.86V to 28.14V
PFC375-1048 48V 46.0V to 56.0V 7.8A 0.5% 1.0% 1% 47.52V to 48.48V
NOTES: 1) Output currents ratings are expressed with 300 LFM forced air.
2) Maximum peak to peak noise expressed as a percentage of output voltage, 20MHz bandwidth.
Rev. 04/2000