STGIPS20C60T-H SLLIMMTM small low-loss intelligent molded module IPM, 3-phase inverter - 20 A, 600 V short-circuit rugged IGBT Datasheet - production data Applications * 3-phase inverters for motor drives * Air conditioners Description This intelligent power module provides a compact, high performance AC motor drive in a simple, rugged design. Combining ST proprietary control ICs with the most advanced short-circuitrugged IGBT system technology, this device is ideal for 3-phase inverters in applications such as motor drives and air conditioners. SLLIMMTM is a trademark of STMicroelectronics. SDIP-25L Features * IPM 20 A, 600 V 3-phase IGBT inverter bridge including control ICs for gate driving and freewheeling diodes * Short-circuit rugged IGBTs * 3.3 V, 5 V, 15 V CMOS/TTL inputs comparators with hysteresis and pull-down / pull-up resistors * Undervoltage lockout * Internal bootstrap diode * Interlocking function * Shutdown function * 4.7 k NTC for temperature control * DBC leading to low thermal resistance * Isolation rating of 2500 Vrms/min * UL recognized: UL1557 file E81734 Table 1. Device summary Order code Marking Package Packing STGIPS20C60T-H GIPS20C60T-H SDIP-25L Tube April 2015 This is information on a product in full production. DocID026322 Rev 2 1/19 www.st.com 19 Contents STGIPS20C60T-H Contents 1 Internal block diagram and pin configuration . . . . . . . . . . . . . . . . . . . . 3 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.1 Control part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1.1 3.2 4 6 2/19 Waveform definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.1 5 NTC thermistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.1 SDIP-25L package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.2 Packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DocID026322 Rev 2 STGIPS20C60T-H 1 Internal block diagram and pin configuration Internal block diagram and pin configuration Figure 1. Internal block diagram AM09320v2 DocID026322 Rev 2 3/19 Internal block diagram and pin configuration STGIPS20C60T-H Table 2. Pin description Pin n Symbol Description 1 OUTU High-side reference output for U phase 2 VbootU Bootstrap voltage for U phase 3 LINU Low-side logic input for U phase 4 HINU High-side logic input for U phase 5 VCC Low voltage power supply 6 OUTV High-side reference output for V phase 7 Vboot V Bootstrap voltage for V phase 8 GND Ground 9 LINV Low-side logic input for V phase 10 HINV High-side logic input for V phase 11 OUTW High-side reference output for W phase 12 Vboot W Bootstrap voltage for W phase 13 LINW Low-side logic input for W phase 14 HINW High-side logic input for W phase 15 SD Shutdown logic input (active low) 16 T1 NTC thermistor terminal 17 NW Negative DC input for W phase 18 W W phase output 19 P Positive DC input 20 NV 21 V V phase output 22 P Positive DC input 23 NU Negative DC input for U phase 24 U U phase output 25 P Positive DC input Negative DC input for V phase Figure 2. Pin layout (bottom view) 0$5.,1*$5($ 4/19 DocID026322 Rev 2 STGIPS20C60T-H Electrical ratings 2 Electrical ratings 2.1 Absolute maximum ratings Table 3. Inverter part Symbol Parameter Value Unit VPN Supply voltage applied between P - NU, NV, NW 450 V VPN(surge) Supply voltage (surge) applied between P - NU, NV, NW 500 V VCES Each IGBT collector emitter voltage (VIN(1) = 0) 600 V Each IGBT continuous collector current at TC = 25C 20 A Each IGBT pulsed collector current 40 A Each IGBT total dissipation at TC = 25C 46 W Short circuit withstand time, VCE = 0.5 V(BR)CES TJ = 125 C, VCC = Vboot = 15 V, VIN (1)= 0 - 5 V 5 s Value Unit Vboot - 21 to Vboot + 0.3 V IC ICP (2) PTOT tscw 1. Applied between HINi, LINi and GND for i = U, V, W 2. Pulse width limited by max junction temperature Table 4. Control part Symbol Parameter VOUT Output voltage applied between OUTU, OUTV, OUTW - GND VCC Low voltage power supply - 0.3 to +21 V Vboot Bootstrap voltage applied between Vboot i - OUTi for i = U, V, W - 0.3 to 620 V Logic input voltage applied between HIN, LIN and GND - 0.3 to 15 V Open drain voltage - 0.3 to 15 V 50 V/ns Value Unit 2500 V VIN VSD/OD dVOUT/dt Allowed output slew rate Table 5. Total system Symbol VISO Parameter Isolation withstand voltage applied between each pin and heatsink plate (AC voltage, t = 60 sec.) Tj Power chips operating junction temperature - 40 to 150 C TC Module case operation temperature - 40 to 125 C DocID026322 Rev 2 5/19 Electrical ratings 2.2 STGIPS20C60T-H Thermal data Table 6. Thermal data Symbol RthJC Parameter Value Unit Thermal resistance junction-case single IGBT 2.7 C/W Thermal resistance junction-case single diode 5 C/W Figure 3. Maximum IC(RMS) current vs. switching frequency (1) AM17108v1 IC(RMS) (A) 28 3-phase sinusoidal PWM VPN = 300 V, Modulaon Index = 0.8, PF = 0.6, Tj = 150 C, fsine = 60 Hz 26 Figure 4. Maximum IC(RMS) current vs. fsine(1) IC(RMS) (A) AM17109v1 3-phase sinusoidal PWM VPN = 300 V, Modulation Index = 0.8, PF = 0.6, T j = 150 C, Tc = 100 C 17 16 Tc = 80 C fsw = 16 kHz fsw = 12 kHz 15 24 14 22 13 20 12 18 11 16 fsw = 20 kHz Tc = 100 C 10 14 9 12 8 4 8 12 16 f sw (kHz) 1 1. Simulated curves refer to typical IGBT parameters and maximum Rthj-c. 6/19 DocID026322 Rev 2 10 100 f sine (Hz) STGIPS20C60T-H 3 Electrical characteristics Electrical characteristics TJ = 25 C unless otherwise specified. Table 7. Inverter part Value Symbol VCE(sat) ICES VF Parameter Test conditions Unit Min. Typ. Max. VCC = Vboot = 15 V, VIN(1)= 0 / 5 V, IC = 20 A - 1.6 2 VCC = Vboot = 15 V, VIN(1)= 0 / 5 V, IC = 20 A, TJ = 125 C - Collector-cut off current (VIN(1)= 0 "logic state") VCE = 550 V, VCC = VBoot = 15 V - 100 A Diode forward voltage VIN(1) = 0 "logic state", IC = 20 A - 2.2 V Collector-emitter saturation voltage V 1.7 Inductive load switching time and energy ton tc(on) toff tc(off) trr Turn-on time Crossover time (on) Turn-off time Crossover time (off) Reverse recovery time Eon Turn-on switching losses Eoff Turn-off switching losses VPN = 300 V, VCC = Vboot = 15 V, VIN(1) = 0 / 5 V, IC = 20 A (see Figure 5) - 390 - - 170 - - 970 - - 150 - - 284 - - 520 - - 460 - ns J 1. Applied between HINi, LINi and GND for i = U, V, W. Note: tON and tOFF include the propagation delay time of the internal drive. tC(ON) and tC(OFF) are the switching time of IGBT itself under the internally given gate driving condition. DocID026322 Rev 2 7/19 Electrical characteristics STGIPS20C60T-H Figure 5. Switching time test circuit INPUT BUS BOOT Lin VBOOT>VCC +5V /SD HVG RSD L Hin OUT VCC Vcc IC DT LVG GND CP+ VCE 0 1 AM17138v1 Figure 6. Switching time definition 100% IC 100% IC t rr IC VCE VCE IC VIN VIN t ON t OFF t C(OFF) t C(ON) VIN(ON) 10% IC 90% IC 10% VCE (a) turn-on VIN(OFF) 10% VCE (b) turn-off Figure 4 "Switching time definition" refers to HIN, LIN inputs (active high). 8/19 DocID026322 Rev 2 10% IC AM09223V1 STGIPS20C60T-H 3.1 Electrical characteristics Control part Table 8. Low voltage power supply (VCC = 15 V unless otherwise specified) Symbol Min. Typ. Max. Unit VCC UV hysteresis 1.2 1.5 1.8 V VCC_thON VCC UV turn ON threshold 11.5 12 12.5 V VCC_thOFF VCC UV turn OFF threshold 10 10.5 11 V VCC_hys Parameter Test conditions Iqccu Undervoltage quiescent supply current VCC = 10 V SD = 5 V; LIN = HIN = 0 450 A Iqcc Quiescent current VCC = 15 V SD = 5 V; LIN = HIN = 0 3.5 mA Table 9. Bootstrapped voltage (VCC = 15 V unless otherwise specified) Symbol Min. Typ. Max. Unit VBS UV hysteresis 1.2 1.5 1.8 V VBS_thON VBS UV turn ON threshold 11.1 11.5 12.1 V VBS_thOFF VBS UV turn OFF threshold 9.8 10 10.6 V IQBSU Undervoltage VBS quiescent current VBS < 9 V SD = 5 V; LIN = 0, HIN = 5 V 70 110 A IQBS VBS quiescent current VBS = 15 V SD = 5 V; LIN = 0, HIN = 5 V 200 300 A Bootstrap driver on resistance LIN= 5 V; HIN= 0 V 120 VBS_hys RDS(on) Parameter Test conditions Table 10. Logic inputs (VCC = 15 V unless otherwise specified) Symbol Parameter Test conditions Min. Typ. Max. Unit Vil Low level logic threshold voltage 0.8 1.1 V Vih High level logic threshold voltage 1.9 2.25 V 100 A 1 A 100 A 1 A 300 A 3 A IHINh HIN logic "1" input bias current HIN = 15 V IHINI HIN logic "0" input bias current HIN = 0 V ILINh LIN logic "1" input bias current LIN = 15 V ILINI LIN logic "0" input bias current LIN = 0V ISDh SD logic "0" input bias current SD = 15 V ISDl SD logic "1" input bias current SD = 0 V Dt Dead time see Figure 7 and Table 14 DocID026322 Rev 2 20 20 30 40 40 120 1.2 s 9/19 Electrical characteristics STGIPS20C60T-H Table 11. Sense comparator characteristics (VCC = 15 V unless otherwise specified) Symbol Parameter Test conditions Min. Typ. Max. Unit Iib Input bias current VCIN = 1 V - 3 A Vol Open-drain low-level output voltage Iod = 3 mA - 0.5 V Comparator delay SD/OD pulled to 5 V through 100 k resistor - 90 130 ns SR Slew rate CL = 180 pF; Rpu = 5 k - 60 tsd Shut down to high / low side driver propagation delay VOUT = 0, Vboot = VCC, VIN = 0 to 3.3 V 50 125 td_comp V/sec 200 ns Table 12. Truth table Logic input (VI) Output Condition SD LIN HIN LVG HVG Shutdown enable half-bridge tri-state L X X L L Interlocking half-bridge tri-state H H H L L 0 `'logic state" half-bridge tri-state H L L L L 1 "logic state" low side direct driving H H L H L 1 "logic state" high side direct driving H L H L H Note: 10/19 X: don't care DocID026322 Rev 2 STGIPS20C60T-H 3.1.1 Electrical characteristics NTC thermistor Table 13. NTC thermistor Symbol Parameter Test conditions Min. Typ. Max. Unit. R25 Resistance T = 25C 4.7 k R125 Resistance T = 125C 160 B B-constant T = 25C to 85C 3950 K T Operating temperature -40 150 C Equation 1: resistance variation vs. temperature R ( T ) = R 25 e 1 1 B --- - ---------- T 298 Where T are temperatures in Kelvins Figure 7. NTC resistance vs. temperature AM16299v1 NTC [k] 180 160 140 120 100 MAX. 80 60 CENTER 40 20 MIN. 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 (C) Figure 8. NTC resistance vs. temperature (zoom) AM17098v1 NTC [k ] 1.800 1.600 1.400 1.200 MAX. 1.000 0.800 CENTER 0.600 0.400 MIN. 0.200 0.000 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 (C) DocID026322 Rev 2 11/19 Electrical characteristics 3.2 STGIPS20C60T-H Waveform definitions 12/19 DocID026322 Rev 2 G CKIN INTE RLO INTE RLO CKIN G Figure 9. Dead time and interlocking waveforms definition STGIPS20C60T-H 4 Application information Application information Figure 10. Typical application circuit AM09321v2 DocID026322 Rev 2 13/19 Application information 4.1 STGIPS20C60T-H Recommendations * Input signals HIN, LIN are active high logic. A 375 k (typ.) pull down resistor is built-in for each input. If an external RC filter is used, for noise immunity, pay attention to the variation of the input signal level. * To prevent the input signals oscillation, the wiring of each input should be as short as possible. * By integrating an application specific type HVIC inside the module, direct coupling to MCU terminals without any opto-coupler is possible. * Each capacitor should be located as nearby the pins of IPM as possible. * Low inductance shunt resistors should be used for phase leg current sensing. * Electrolytic bus capacitors should be mounted as close to the module bus terminals as possible. Additional high frequency ceramic capacitor mounted close to the module pins will further improve performance. * The SD signal should be pulled up to 5 V / 3.3 V with an external resistor. Table 14. Recommended operating conditions Value Symbol Parameter Conditions Unit Min. VPN Note: 14/19 Supply Voltage Applied between P-Nu,Nv,Nw VCC Control supply voltage Applied between VCC-GND VBS High side bias voltage tdead 13.5 Applied between VBOOTi-OUTi for i=U,V,W 13 Blanking time to prevent Arm-short For each input signal 1.5 fPWM PWM input signal -40C < Tc < 100C -40C < Tj < 125C TC Case operation temperature For further details refer to AN3338. DocID026322 Rev 2 Typ. Max. 300 400 V 15 18 V 18 V s 20 kHz 100 C STGIPS20C60T-H 5 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Please refer to dedicated technical note TN0107 for mounting instructions. 5.1 SDIP-25L package information Figure 11. SDIP-25L package outline B DocID026322 Rev 2 15/19 Package information STGIPS20C60T-H Table 15. SDIP-25L mechanical data mm Dim. 16/19 Min. Typ. Max. A 43.90 44.40 44.90 A1 1.15 1.35 1.55 A2 1.40 1.60 1.80 A3 38.90 39.40 39.90 B 21.50 22.00 22.50 B1 11.25 11.85 12.45 B2 24.83 25.23 25.63 C 5.00 5.40 6.00 C1 6.50 7.00 7.50 C2 11.20 11.70 12.20 C3 2.90 3.00 3.10 e 2.15 2.35 2.55 e1 3.40 3.60 3.80 e2 4.50 4.70 4.90 e3 6.30 6.50 6.70 D 33.30 D1 5.55 E 11.20 E1 1.40 F 0.85 1.00 1.15 F1 0.35 0.50 0.65 R 1.55 1.75 1.95 T 0.45 0.55 0.65 V 0 6 DocID026322 Rev 2 STGIPS20C60T-H Packing information 8123127_E AM10488v1 Figure 12. SDIP-25L packing information Base quantity: 11 pcs Bulk quantity: 132 pcs 5.2 Package information DocID026322 Rev 2 17/19 Revision history 6 STGIPS20C60T-H Revision history Table 16. Document revision history 18/19 Date Revision Changes 09-Oct-2014 1 Initial release 10-Apr-2015 2 Text edits and formatting changes throughout document Updated Figure 2: Pin layout (bottom view) Updated Section 5: Package information DocID026322 Rev 2 STGIPS20C60T-H IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved DocID026322 Rev 2 19/19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STGIPS20C60T-H