B84143V0033R127 - EPCOS - Datasheet.Live

%BUB4IFFU

3-line sine-wave EMC output filters

for converters and power electronics



SineFormer



520 V AC, 11 ... 320 A, 40 °C

Series/type: B84143V*R127

Date: November 2007

mation contained therein without EPCOS’ prior express consent is prohibited.

207/07

3-li ne f ilters

Sine-wave EMC output filters



SineFormer B84143V*R127

Please read Cautions and warnings and

Important notes at the end of this doc um ent.

Filters for converters and power electronics

Rated voltage 520 V AC, 50/60 Hz

Rated current 11 to 320 A

Construction

■3-line sine-wave EMC output filter

■Metal case

Features

■Supersede shielded motor cables

■Motor noise reduction

■Reduction of bearing current

■dv/dt reduction

■Easy to install

■Compact design

■Degree of protection: IP 201)

■Design complies with EN 60939, UL 1283, CSA 22.2 No.8

■Optimized for long motor cables (up to 1000 m) and

operation under full load

■No integrated forced ventilation (maintenance-free)

■Connection to converter DC-link is not necessary

■Reducing eddy current losses

Applications

■Frequency converters for motor drives, e.g.

–elevators

– pumps

– traction and conveyer systems

– HVAC systems (heating, ventilation and air conditioning)

Terminals

■Line side (to converter): shielded cable up to 180 A;

copper bus bars for the 320-A filter

■Load side (to motor): Finger-safe terminal blocks up to 180 A;

copper bus bars for the 320-A filter

Marking

■Marking on component:

Manufacturer’s logo, ordering code, rated voltage,

rated current, rated motor frequency, rated switch frequency,

rated temperature, climatic category, date code

■Minimum marking on packaging:

Manufacturer’s logo, ordering code, date code, quantity

)

To IEC 60529:2001

307/07

3-line filters B84143V*R 127

Sine-wave EMC output filters



SineFormer

Please read Cautions and warnings and

Important notes at the end of this doc um ent.

Typical circuit diagram

Technical data and measuring conditions

Rated voltage VR520 V AC, 50/60 Hz

320-A type: 600 V AC

Rated current IRReferred to 40 °C ambient temperature

Test voltage Vtest 2100 V DC, 2 s (line/line)

2700 V DC, 2 s (lines/case)

Frequency Motor

Pulse (switch) 0 ... 100 Hz

4 ... 8 kHz (320-A type: 2.5 ... 3.0 kHz)

Overload capability (thermal) 1.5 · IR for 1 min per hour

Max. dv/dt on filter input 5 kV/μs

Convection distance to other devices See next page

Vibration (sine) 10 cycles, 1 oct./min, 3 ... 13 Hz: 3 mm, 3 ... 200 Hz: 1 g

Shock (half sine) 15 g, 11 ms, 3 axis, 3 shocks per direction, 18 total

(to IEC 60 068-2-6)

Current (IR) derating depending on altitude From 1000 ... 4000 m: 5%/1000 m

Current (IR) derating depending on

am bient te mperatu re From 40 ... 60 °C: 10%/5 °C

Temperature Inside iron choke: approx. 130 °C

Housing: approx. 70 °C

Noise Approx. 72 dB (A)

Climatic category (IEC 60068-1) 25/100/21 (–25 °C/+100 °C/21 days damp heat test)

Converter

SSB2260-B

V1 V2

Motor

407/07

3-li ne f ilters

Sine-wave EMC output filters



SineFormer B84143V*R127

Please read Cautions and warnings and

Important notes at the end of this document.

Characteristics and ordering codes

× = approval granted

Convection space (cabinet fan recommended)

AC IRTerminal

cross

section

Voltage

drop Losses

100 Hz

Rtyp Approx.

weight Ordering code Approvals

VAmm

2%WmΩkg

520 11 4 5 50 46 9 B84143V0011R127 ××

16 6 7 70 32 11 B84143V0016R127 ××

33 10 8 120 20 24 B84143V0033R127 ××

66 25 8 180 15 47 B84143V0066R127 ××

95 50 10 250 8 99 B84143V0095R127 ××

180 150 10 400 6 125 B84143V0180R127 ××

600 320 see dim.

drawing 10 750 4 195 B84143V0320R127 −−

SSB2257-R

>200 mm >200 mm

>100 mm

SSB2258-Z

>200 mm

507/07

3-line filters B84143V*R 127

Sine-wave EMC output filters



SineFormer

Please read Cautions and warnings and

Important notes at the end of this doc um ent.

Dimensional drawings

B84143V0011R127 ... B84143V0095R127 (11 ... 95 A)

Dimensions (mm)

Filter

B84143... abcdef hg∅ k

V0011R127 120 100 335 280 260 700 160 6.6 14

V0016R127 120 100 375 320 300 900 190 6.6 16

V0033R127 150 120 470 380 360 900 240 6.6 20

V0066R127 210 160 650 530 500 1500 280 8.6 30

V0095R127 250 200 780 650 620 1600 360 11 43

Filter l m r Terminal blocks Threaded bolt Q

B84143... mm2Nm PE Nm mm2

V0011R127 −−− 4 0.6 ... 0.8 M5×9.5 2±0.1 2.5

V0016R127 −−− 6 1.5 ... 1.8 M5×9.5 2±0.1 4

V0033R127 −−−10 1.5 ... 1.8 M5×12.5 2±0.1 6

V0066R127 545 122 165 25 4 ... 4.5 M6×16.5 3±0.15 16

V0095R127 665 163 200 50 6 ... 8 M6×15.5 3±0.15 35

SSB2259-8-E

Q (Cross section of the wire end)

Terminal blocks

øk

ø25

ø45

only for

66-A and

95-A filters

Ring bolt

607/07

3-li ne f ilters

Sine-wave EMC output filters



SineFormer B84143V*R127

Please read Cautions and warnings and

Important notes at the end of this doc um ent.

B84143V0180R127 (180 A)

SSB2261-J-E

375

4.5 60193

PE M8 x 30

Tightening torque 6±0.3 Nm

Terminal blocks 150 mm

Tightening torque 12 ... 15 Nm

Cable clamp for cable ø55

Shielded cable 70 mm

15 880

2700+10

240

310

30 800 65

910 1130

(4 x)

140

220

(like DIN 46228)

Wire end ferrule

A70-25 (4x)

707/07

3-line filters B84143V*R 127

Sine-wave EMC output filters



SineFormer

Please read Cautions and warnings and

Important notes at the end of this doc um ent.

B84143V0320R127 (320 A)

SSB2262-S-E

(471.5)

200

2 x 65 = 130

12 Cable gland MS-SC 36

(232)

PE M12 x 19.5

Tightening torque 15.5±1.5 Nm

ø25

ø45

163

200 2 x 65 = 130

(358.5)

424.5

446

ø12

(10 x)

660

71.5 910

953

405±1 405±1

980±1

1010

2 x 65 = 130

300±0.5

470±1

500

2 x 65 = 130 320

443

Tightening torque 10±1 Nm

PE M10 x 32.5

Tightening torque 10±1 Nm

PE M10 x 36

DIN 580-M10

Ring bolt

Converter

Motor

807/07

3-li ne f ilters

Sine-wave EMC output filters



SineFormer B84143V*R127

Please read Cautions and warnings and

Important notes at the end of this doc um ent.

Cautions and warnings

■Please note the advices in our data book “EMC Filters” (latest edition). Attention should be paid

to the chapter “General safety notes”.

■It shall be ensure d that only qualifi ed person s (elec tricit y spec iali sts) are enga ged on wo rk such

as planning, assembly, installation, operation, repair and maintenance. They must be provided

with the corresponding documentation.

■Danger of electric shock. SineFormer contain components th at store an electric charge. Danger-

ous voltages can continue to exist at the filter terminals for longer than five minutes even after

the power has been switched off.

■The protective earth connections shall be the first to be made when the SineFormer is installed

and the last to be disconnected. Depending on the magnitude of the leakage currents, the par-

ticular specifications for making the protective-earth connection must be observed.

■Impermissible overloading of the SineFormer, such as with circuits able to cause resonances,

impermissible voltages at higher frequencies etc. can lead to bodily injury and death as well as

cause substantial material damages (e.g. destruction of the filter housing).

■SineFormer must be protected in the application against impermissible exceeding of the rated

currents by overcurrent protective.

■In case of leakage currents >3.5 mA you shall mount the PE conductor stationary with the re-

quired cross section before beginning of operation and save it against disconnecting. For leak-

age currents IL1) <10 mA the PE conductor must have a KU value2) of 4.5; for leakage currents

IL ≥10 mA the PE conductor must have a KU value of 6.

■The information, specifications and values contained in this data sheet are based on our know-

lege of typical requirements that are often placed on SineFormer. It is incumbent on the customer

to check and decide whether this SineFormer is suitable for use in a particular application.

■In particular the values with regard to “temperature” and “noise” have to be observed.

1) IL = leak age cur ren t

2) The KU value (symbol KU) is a cla ssi fica tion parame ter of sa fety-re ferre d fail ur e type s design ed t o ensur e prote c-

tion against hazardous body currents and excessive heating.

A value of KU = 4.5 with respect to interruptions is attained:

− with a permanently connected protective earth circuit 1.5 mm2

− with a protective earth circuit 2.5 mm2 connec ted vi a shro ud co nnec tor s (IEC 6030 9-2).

KU = 6 with respect to interruptions is achieved for fixed-connection lines 10 mm2 where the type of connection

and line layout correspond to the requirements for PEN conductors as specified in relevant standards.

907/07

Important no tes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. Thes e state ments are based on our knowledge of typica l requi re-

ments that are oft en placed on our produc ts in t he areas of applicati on concerne d. We neverth e-

less expressly point out that such statements cannot be regarded as binding statements

about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with

them than the cu stomers themselves. For these reasons , it is always ultimate ly incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic compone nts

or failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications re-

quiring a very high level of operational safety an d especially in customer applications in which the

malfunction or failure of a passive electronic component could endanger human life or health

(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suit-

able design of the custo mer applic ation or oth er action t aken by the custom er (e.g. ins tallation o f

protective circuitry or redundancy) that no injury or damage is sustained by third parties in the

event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to sa tisfy certain technical req uirements, some of the products described in this pub-

lication may contain substances subject to restrictions in certain jurisdictions (e.g. be-

cause they are classed as “hazardous”). Useful information on this will be found in our Material

Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed

questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We a lso reserve the right to discontinue production and delivery of products. Consequent-

ly, we cannot guarantee that all products named in this publication will always be available.

The aforementioned does not apply in t he case of individual agreements deviati ng from the fore-

going for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version

of the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu -X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap,

PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID,

SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pend-

ing in Europe and in other countries. Further in formation will be found on the Internet at www.ep-

cos.com/trademarks.