92750101000 - Belden Wire & Cable Company

9275 Coax - 75 Ohm Coax

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

Series 59, 20 AWG solid .032" bare copper-covered steel conductor, gas-injected foam polyethylene insulation, Duofoil® or Duobond® +

aluminum braid shield (40% coverage), PVC jacket.

PHYSICAL CHARACTERISTICS:

CONDUCTOR:

Number of Coax 1

Total Number of Conductors 1

Series Type Series 59

AWG 20

Stranding Solid

Conductor Diameter .032 in.

Conductor Material BCCS - Bare Copper Covered Steel

INSULATION:

Insulation Material Gas-injected FPE - Foam Polyethylene

Insulation Diameter .144 in.

OUTER SHIELD:

Outer Shield Material Trade Name Duofoil®

Outer Shield Type Tape/Braid

Outer Shield Material :

Layer Number Trade Name Type Material % Coverage (%)

1 Duofoil® Tape Aluminum Foil-Polyester

Tape-Aluminum Foil 100

2 Braid AL - Aluminum 40

Outer Shield %Coverage 100 %

OUTER JACKET:

Outer Jacket Material PVC - Polyvinyl Chloride

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter .237 in.

MECHANICAL CHARACTERISTICS:

Page 1 of

9275 Coax - 75 Ohm Coax

Operating Temperature Range -40°C To +80°C

UL Temperature Rating 80°C

Bulk Cable Weight 23 lbs/1000 ft.

Max. Recommended Pulling Tension 80 lbs.

Min. Bend Radius (Install) 2.5 in.

APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:

APPLICABLE STANDARDS:

NEC/(UL) Specification CM, CATV

CEC/C(UL) Specification CM

EU CE Mark (Y/N) Yes

EU RoHS Compliant (Y/N) Yes

EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004

FLAME TEST:

UL Flame Test UL1685 UL Loading

PLENUM/NON-PLENUM:

Plenum (Y/N) N

ELECTRICAL CHARACTERISTICS:

Nom. Characteristic Impedance 75 +/-3 Ohms

Nom. Inductance .097 µH/ft

Nom. Capacitance Conductor to Shield 16.2 pF/ft

Nominal Velocity of Propagation 83 %

Nominal Delay 1.2 ns/ft

Nom. Conductor DC Resistance @ 20 Deg. C 44.5 Ohms/1000 ft

Nominal Outer Shield DC Resistance @ 20°C 17 Ohms/1000 ft

Typical Structural Return Loss :

Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) Typical Structural

Return Loss (dB)

5 550 18

Nom. Attenuation :

Page 2 of

9275 Coax - 75 Ohm Coax

Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) Nom. Attenuation

(dB/100 ft.)

5 0.75

55 1.84

211 3.36

270 3.79

300 3.99

350 4.33

400 4.66

450 4.96

550 5.48

750 6.51

870 7.00

1000 7.68

Max. Operating Voltage - UL 300 V RMS

NOTES:

Notes Sweep tested 5 MHz to 550 MHz.

PUT-UPS AND COLORS:

Item Description Put-Up (ft.) Ship Weight (lbs.) Jacket Color Notes

9275 009U1000 #20

LDPE/GIFHDLDPE

SH FRPVC

U1000 23 WHITE

9275 0101000 #20

LDPE/GIFHDLDPE

SH FRPVC

1000 24 BLACK

9275 010U1000 #20

LDPE/GIFHDLDPE

SH FRPVC

U1000 23 BLACK

9275 010U500 #20

LDPE/GIFHDLDPE

SH FRPVC

U500 12 BLACK

Revision Number: 1 Revision Date: 08-18-2005

Page 3 of

9275 Coax - 75 Ohm Coax

Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication,

information and specifications described herein are subject to error or omission and to change without notice, and the listing of such

information and specifications does not ensure product availability.

Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,

statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or

exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,

negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described

herein.

All sales of Belden products are subject to Belden's standard terms and conditions of sale.

Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California

Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS

(Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our

Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR

(Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as

reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its

publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality

specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of

legislation and regulations based on their individual usage of the product.

Belden CDT Electronics Division declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended

by directive 93/68/EEC.

Page 4 of