H11AA1, H11AA2, H11AA3, H11AA4 H11AA1X, H11AA2X, H11AA3X, H11AA4X A.C. INPUT PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS APPROVALS l UL recognised, File No. E91231 l CSA recognised, Cert. No. CA 110306-1 Dimensions in mm 2.54 7.0 6.0 'X' SPECIFICATION APPROVALS l VDE 0884 in 3 available lead form : - STD - G form - SMD approved to CECC 00802 1 2 6 5 3 4 1.2 7.62 6.62 7.62 4.0 3.0 13 Max 0.5 DESCRIPTION The H11AA series of optically coupled isolators consist of two infrared light emitting diodes connected in inverse parallel and NPN silicon photo transistor in a standard 6 pin dual in line plastic package. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l AC or polarity insensitive input l All electrical parameters 100% tested l Custom electrical selections available 3.0 0.5 3.35 0.26 ABSOLUTE MAXIMUM RATINGS (25C unless otherwise specified) Storage Temperature -55C to + 150C Operating Temperature -55C to + 100C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260C INPUT DIODE Forward Current Peak Forward Current Power Dissipation 100mA 1A 200mW OUTPUT TRANSISTOR APPLICATIONS l Computer terminals l Industrial systems controllers l Telephone sets, Telephone exchangers l Signal transmission between systems of different potentials and impedances OPTION SM 10.46 9.86 7.62 POWER DISSIPATION Total Power Dissipation 350mW (derate linearly 4.67mW/C above 25C) 1.25 0.75 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1YD England Tel: (01429)863609 Fax : (01429) 863581 e-mail sales@isocom.co.uk http://www.isocom.com 7/12/00 30V 70V 7V 5V 300mW OPTION G SURFACE MOUNT 0.6 0.1 Collector-emitter Voltage BVCEO Collector-base Voltage BVCBO Emitter-collector Voltage BVECO Emitter-base Voltage BVEBO Power Dissipation ISOCOM INC 1024 S. Greenville Ave, Suite 240, Allen, TX 75002 USA Tel: (214) 495-0755 Fax: (214) 495-0901 e-mail info@isocom.com http://www.isocom.com DB92296m-AAS/A1 ELECTRICAL CHARACTERISTICS ( TA = 25C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Output Collector-emitter Breakdown (BVCEO) ( note 2 ) Collector-base Breakdown (BVCBO) Emitter-base Breakdown (BVEBO) Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) Coupled MIN TYP MAX UNITS 1.2 V IF = 10mA 30 V IC = 1mA 70 5 7 V V V nA IC = 100A IE = 100A IE = 100A VCE = 10V % % % % 10mAIF , 10mAIF , 10mAIF , 10mAIF , V 10mAIF , 0.5mAIC 50 Current Transfer Ratio (CTR) (note 2 ) H11AA4 100 H11AA3 50 H11AA1 20 H11AA2 10 Collector-emitter Saturation VoltageVCE(SAT) 0.4 Current Transfer Ratio Symmetry 0.33 Input to Output Isolation Voltage VISO 5300 7500 Input-output Isolation Resistance RISO 5x1010 Note 1 Note 2 7/12/00 1.5 TEST CONDITION 3.0 10V 10V 10V 10V VCE VCE VCE VCE 10mAIF , 10V VCE VRMS VPK See note 1 See note 1 VIO = 500V (note 1) Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. DB92296m-AAS/A1 Collector Power Dissipation vs. Ambient Temperature Forward Current vs. Forward Voltage 100 80 Forward current I F (mA) Collector power dissipation P C (mW) 400 300 200 100 60 40 20 0 -20 -40 -60 -80 -100 0 -30 0 25 50 75 100 -2.0 125 Forward Current vs. Ambient Temperature Normalised output current ( I C ) Forward current I F (mA) 1.0 2.0 Normalised Output Current vs. Ambient Temperature 120 100 80 60 40 20 2.4 2.2 2.0 1.8 Normalised to VCE = 10V , IF = 10mA , RBE = 1M , TA = 25C IF = 20mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 IF = 10mA IF = 5mA 0 -30 0 25 50 75 100 125 Ambient temperature TA ( C ) 0 25 50 75 Ambient temperature TA ( C ) Normalised Output Current vs. Collector-emitter Voltage Normalised Output Current vs. Forward Current 10 IF = -10mA 1 IF = +10mA 10-1 Normalised to VCE = 10V , IF = +10mA , TA = 25C 10-2 -30 Normalised output current ( I C ) Normalised output current ( I ) 0 Forward voltage VF ( V ) Ambient temperature TA ( C ) 100 5 1 0.5 0.1 0.05 0.01 0.005 Normalised to VCE = 10V , IF = 10mA , TA = 25C 0.001 0.0005 0.0001 10-3 0.1 0.2 0.5 1 2 5 10 20 Collector-emitter voltage VCE ( V ) 7/12/00 -1.0 50 0.1 0.2 0.5 1 2 5 10 20 50 100 Forward current IF (mA) DB92296m-AAS/A1