3MTM CP2 Press-Fit Socket 2 mm Type AB, 95, 110 and 125 Signal Contacts Right Angle CP2 Series * 25 mm basic system unit * 38, 44 and 50 mm module * Designed according to IEC 61076-4-101 and IEC 60352-5 Standards * 2 mm grid spacing allows for high signal density at low cost * "Eye of the Needle" compliant pin press-fit design reduces manufacturing time and cost * Additional grounding row available for improved ground bounce and EMI immunity * Mates with 5-row 3MTM HM and CP2 Headers * End-to-end stackable with 5-row 3MTM HSHM, UHM and CP2 Sockets * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: July 16, 2015 TS-2264-C Sheet 1 of 2 Physical Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: 0.75N/PIN Withdrawl Force: 0.15N/PIN Mating and Un-mating Operations: 200 for KR plating Electrical Current Rating: Contact Resistance: Insulation Resistance: Test Voltage: 1.0 Amperes at 70C with all contacts powered 20 m 10,000 M 750 VACRMS Environmental Temperature Ratings: -55C to +125C PCB Data Recommended PCB Plated Through Hole: Drill hole diameter: Hole platings: PCB thickness: Press-In Force: Retention Force: 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnectors.com 0.60.05 mm 0.70.02 mm Cu 25~50 m, Sn<10 m 1.4 - 4.2 mm 204N/pin on nominal hole diameter 13.5N/pin on nominal hole diameter 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM CP2 Press-Fit Socket B-Row CL Datum 2 mm Type AB, 95, 110 and 125 Signal Contacts Right Angle CP2 Series DIM A Max mm [Inch] Tolerance Unless Noted mm 0. .0 .00 1 0.3 0.13 DIM B [ ] Dimensions for Reference only DIM A Signal Contact Quantity Dimension A Dimension B 95 38.00 [1.496] 36.00 [1.417] 110 44.00 [1.732] 42.00 [1.653] 125 50.00 [1.968] 48.00 [1.890] RECOMMENDED PCB LAYOUT Ordering Information CP2-SABXXX-X1-XXXX Number of Signal Contacts: 095,110 and 125 Plating Options FJ= 1020 " Gold Contact Area 100200 " Matte Tin 5080 " Nickel Underplate (RIA E1 & C1 apply) Shield Options: G= Upper Shield Blank= No Shield * This diagram serves only for Part Number descriptive definitions. PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS. 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnectors.com KR= 3040 " Gold Contact Area 100200 " Matte Tin 5080 " Nickel Underplate (RIA E1 & C1 apply) TS-2264-C Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M is a trademark of 3M Company. Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. Such references should not be construed as a guarantee of compliance to all requirements in a given specification. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. (c) 3M 2015. All rights reserved. RIA-2217A-E