SURFACE MOUNT DISPLAY ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES P/N: KPSC03-109 BLUE Description Features 0.3 INCH DIGIT HEIGHT. The Blue source color devices are made with GaN on SiC LOW CURRENT OPERATION. Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic I.C. COMPATIBLE. glove when handling the LEDs. MECHANICALLY RUGGED. All devices, equipment and machinery must be electrically GRAY FACE,WHITE SEGMENT. grounded. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB1992 REV NO: V.6 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-109 Iv (ucd) @ 10 mA Lens Type BLUE (GaN) WHITE DIFFUSED Description Min. Typ. 1200 5000 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Blue D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB1992 REV NO: V.6 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 Blue KPSC03-109 SPEC NO: DSAB1992 REV NO: V.6 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 KPSC03-109 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB1992 REV NO: V.6 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4