O0312PJ TKIM TC-00002673 No. A1067-1/9
http://onsemi.com
Semiconductor Components Industries, LLC, 2013
September, 2013
TIG067SS
N-Channel IGBT
400V, 150A, VCE(sat);3.8V Single SOIC8
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Features
• Low-saturation voltage • 4.0V drive
• Enhansment type • Built-in Gate-to-Emitter protection diode
• High speed switching • Halogen free compliance
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Emitter Voltage (DC) VCES 400 V
Collector-to-Emitter Voltage (Pulse) VCESP PW≤1ms 450 V
Gate-to-Emitter Voltage (DC) VGES ±6 V
Gate-to-Emitter Voltage (Pulse) VGESP PW≤1ms ±8 V
Collector Current (Pulse) ICP
CM=600μF
150 A
Maximum Collector-to-Emitter dv / dt dv / dt VCE≤320V, starting Tch=25°C 1500 V /
μ
s
Allowable Power Dissipation PD
When mounted on FR4 substrate (11,680mm
2
×1.6mm)
1.2 W
Channel Temperature Tch 150 °C
Storage Temperature Tstg -40 to +150 °C
Package Dimensions
unit : mm (typ)
7072-002
Ordering number : ENA1067
Product & Package Information
• Package : SOIC8
• JEITA, JEDEC : SC-87, SOT-96
• Minimum Packing Quantity : 2500 pcs./reel
Packing Type: TL Marking
Electrical Connection
4.9 0.22
6.0
3.9
1.375
14
58
0.445
1.27
0.715
0.375
1.55
0.175
0.254 (GAGE PLANE)
1 : Emitter
2 : Emitter
3 : Emitter
4 : Gate
5 : Collecto
r
6 : Collecto
r
7 : Collecto
r
8 : Collecto
r
SOIC8
TL
TIG
067
LOT No.
1 to 3
5 to 8
4
TIG067SS-TL-2W
TIG067SS
No. A1067-2/9
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Collector-to-Emitter Breakdown Voltage V(BR)CES IC=2mA, VGE=0V 400 V
Collector-to-Emitter Cutoff Current ICES V
CE=320V, VGE=0V 10 μA
Gate-to-Emitter Leakage Current IGES VGE=±6V, VCE=0V ±10 μA
Gate-to-Emitter Threshold Voltage VGE(off) VCE=10V, IC=1mA 0.4 1.0 V
Collector-to-Emitter Saturation Voltage VCE(sat) IC=150A, VGE=4V 3.8 5 V
Input Capacitance Cies
VCE=10V, f=1MHz
5100 pF
Output Capacitance Coes 59 pF
Reverse Transfer Capacitance Cres 43 pF
Fall Time tf
IC=150A, VCC=320V, Resistor load VGE=4V, RG=36Ω
270 ns
Fig1 Large Current R Load Switching Circuit
Note1. Gate Series Resistance RG ≥ 36Ω is recommended for protection purpose at the time of turn OFF. However,
if dv / dt ≤ 1500 / μs is satisfi ed at customer’s actual set evaluation, RG < 36Ω can also be used.
Note2. The collector voltage gradient dv / dt must be smaller than 1500V / μs to protect the device when it is turned off.
Ordering Information
Device Package Shipping memo
TIG067SS-TL-2W SOIC8 2,500pcs./reel Pb Free and Halogen Free
100kΩ
CM
RL
RG
VCC
+
TIG067SS
4V
0V
TIG067SS
No. A1067-3/9
IC -- VCE
Collector-to-Emitter Voltage, VCE -- V
Collector Current, IC -- A
IC -- VGE
Gate-to-Emitter Voltage, VGE -- V
Collector Current, IC -- A
Case Temperature, Tc -- °C
Gate-to-Emitter Cutoff Voltage, VGE(off) -- V
VGE(off) -- Tc
Collector-to-Emitter Voltage, VCE -- V
VCE -- VGE
Gate-to-Emitter Voltage, VGE -- V Case Temperature, Tc -- °C
VCE(sat) -- Tc
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
Collector-to-Emitter Voltage, VCE -- V
VCE -- VGE
Gate-to-Emitter Voltage, VGE -- V
Collector-to-Emitter Voltage, VCE -- V
VCE -- VGE
Gate-to-Emitter Voltage, VGE -- V
Collector-to-Emitter Voltage, VCE -- V
Cies, Coes, Cres -- pF
Cies, Coes, Cres -- VCE
IT15739
05075
100 125 15025--25--50
5
6
4
3
1
2
IC=150A
VGE=4V
4
3
1
2
IT15736
IT15738
1.0 1.5
10
9
8
7
6
5
2.0 3.02.5 3.5 4.0 4.5 5.0
130A
100A
Tc= --25°C
IC=150A
4
3
1
2
IT15737
1.0 1.5
10
9
8
7
6
5
2.0 3.02.5 3.5 4.0 4.5 5.0
130A
100A
Tc=25°C
IC=150A
100A
IT15540
0 50 75 100 125 15025--25--50
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
01618206841214102
10
100
7
5
3
2
10000
1000
7
5
3
2
7
5
3
2
IT15741
Cies
Coes
Cres
f=1MHz
4
3
1
2
1.0 1.5
10
9
8
7
6
5
2.0 3.02.5 3.5 4.0 4.5 5.0
130A
100A
Tc= 75°C
IC=150A
VCE=10V
IC=1mA
130A
IT15734
0
0
25
50
75
125
100
200
150
175
IT15735
0
0
12 5 769834 10
25
50
75
175
125
100
200
150
1.0 1.50.5 2.0 3.02.5 5.04.0 4.53.5
VGE=5.0V
4.0V
3.0V
VCE=5V
2.5V
25°C
75°C
Tc= --25°
C
Tc=25°C
TIG067SS
No. A1067-4/9
SW Time -- RG
Switching Time, SW Time -- ns
SW Time -- ICP
Switching Time, SW Time -- ns
Gate-to-Emitter Voltage, VGE -- V
Collector Current (Pulse), ICP -- A
Collector Current (Pulse), ICP -- A
Collector Current (Pulse), ICP -- A
Maximum Capacitor, CM -- μF
CM -- ICP
ICP -- VGE
dv / dt -- RG
Gate Series Resistance, RG -- Ω
Turn OFF dv / dt -- V / μs
Gate Series Resistance, RG -- Ω
dv / dt -- Turn OFF IC
Turn OFF Collector Current, Turn OFF IC -- A
dv / dt, dv / dt -- V / μs
IT15747
20 40 60 80 100 120 1400 180160
200
100
0
300
400
500
600
700
800 VGE=4V
VCE=320V
IT15746
34 76895210
0
20
40
60
80
100
120
140
180
160
Tc≤70°C
CM=600μF
IT15745
50 60 70 9080 1003020 40100
0
500
1000
1500
2500
2000
3000 Switching test circuit Fig.1
V
GE=4V
V
CC=320V
I
CP=150A
Tc=25°C
Tc=70°C
IT15748
20 40 60 80 100 120 1400 180160
0
250
500
750
1250
1000
1750
1500
2000 Tc≤70°C
VCE=320V
23 57 32
10010
IT15923
1000
3
2
2
7
5
3
7
5
3
2
100
10
tr
td(off)
td(on)
tf
0 20406080 120100
IT15924
1000
7
7
5
3
2
100
3
5
3
2
2
tr
td(off)
td(on)
tf
Switching test circuit Fig.1
V
GE=4V
V
CC=320V
R
G=36Ω
Switching test circuit Fig.1
VGE=4V
VCC=320V
ICP=150A
CM=600μF
PW=50μS
PD -- Ta
Ambient Temperature, Ta -- °C
Allowable Power Dissipation, PD -- W
0.8
1.2
1.0
1.4
0.4
0.2
0.6
00 16014012010080604020
IT16955
When mounted on FR4 substrate
(11,680mm2✕1.6mm)
TIG067SS
No. A1067-5/9
Defi nition of dv/dt
dv/dt is defi ned as the maximum slope of the below VCE curve during turn-off period.
dv/dt=ΔVCE/Δt=ΔVCE/100ns
Overall waveform Enlarged picture of turn-off period
Defi nition of Switching Time
VGE
VCE
IC
VGE:10%
VCE:90%
VGE:90%
VCE:10%
VCE:10%
td(on) td(off)tr
tf
IC:90%
IC:10%
t
t
t
V,I VCE
IC
ICP
Turn off IC
t
Turn-off period
Δt=100ns
VCE
ΔVCE
Turn off VCE
TIG067SS
No. A1067-6/9
Taping Specifi cation
TIG067SS-TL-2W
3DFNLQJ )RUPDW
0D[LPXP 1XPEHU RI GHYLFHV
FRQWDLQHG SFV
3DFNLQJ IRUPDW3DFNDJH 1DPH &DUULHU 7DSH
7\SH
5HHO ,QQHU ER[ 2XWHU ER[ ,QQHU %2; : 2XWHU %2; :
62,& % UHHOV FRQWDLQHG
'LPHQVLRQV PPH[WHUQDO
LQQHU ER[HV FRQWDLQHG
'LPHQVLRQV PPH[WHUQDO
/DEHO -(,7$ 3KDVH
/($' )5(( -(,7$ 3KDVH
7<3( &2'(
ႼႼႼႼႼႼႼႼႼႼႼႼႼႼ
7<3( ႼႼႼႼႼႼႼႼ
47< ႼႼႼႼ SFV /($' )5((ೈ
/27 ႼႼႼႼႼႼႼႼ
3$&.$*( ႼႼႼႼႼႼႼႼ
63(&,$/ ႼႼႼႼႼႼႼႼ
63(&,$/
=&
$66(0%/< ',))86,21
5HHO ODEHO,QQHU ER[ ODEHO
XQLW PP
37<3( ႼႼႼႼႼႼႼႼႼ
7/27 ႼႼ
447< ႼႼႼႼ
=63(6,$/ႼႼႼႼႼႼႼႼႼ
3DFNLQJ PHWKRG
5HHO ODEHO
7\SH 1R
/27 1R
4XDQWLW\
2ULJLQ
2XWHU ER[ ODEHO
,W LV D ODEHO DW WKH WLPH RI IDFWRU\ VKLSPHQWV
7KH IRUP RI D ODEHO PD\ FKDQJH LQ SK\VLFDO
GLVWULEXWLRQ SURFHVV
/($' )5((
127(
7KH /($' )5(( GHVFULSWLRQ VKRZV WKDW
LW LV FRPSOHWH OHDG IUHH
TIG067SS
No. A1067-7/9
7DSLQJ FRQILJXUDWLRQ
&DUULHU WDSH VL]H XQLW PP
'HYLFH SODFHPHQW GLUHFWLRQ
3DFNLQJ W\SHᨿᨿᨿᨿᨿ7/
/HDGHU SRUWLRQ DQG WUDLOHU SRUWLRQ XQLW PP᧥
RU PRUH
7UDLOHU SRUWLRQ
'HYLFH PRXQWLQJ SRUWLRQ /HDGHU SRUWLRQ
RU PRUH
,GOH SRUWLRQ
RU PRUH &RYHU WDSH
/HDGHU SRUWLRQ
RU PRUH
'HYLFH PRXQWLQJ SRUWLRQ
˳
˳ s
s
s
••• •••••••
s
s
s s s
s
s
Feed D i rec t ion
5HH O
&D UU LH U 7DSH
7/
3LQ ,QGH[
)HHG 5RXQG +R OH
TIG067SS
No. A1067-8/9
Outline Drawing Land Pattern Example
TIG067SS-TL-2W
Mass (g) Unit
0.082
* For reference
mm Unit: mm
1.75
1.27
0.65
5.60
TIG067SS
PS No. A1067-9/9
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf.
SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
