ALUMINUM ELECTROLYTIC CAPACITORS WF Chip Type, Low Impedance series Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). Specifications WF Low Impedance WG Item Low Impedance WT Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current -55 to +105C 6.3 to 35V 1 to 220F 20% at 120Hz, 20C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz at 20C 6.3 0.22 Rated voltage (V) tan ( MAX.) Tangent of loss angle (tan ) 10 0.19 16 0.16 25 0.14 35 0.12 Measurement frequency : 120Hz 6.3 2 4 Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z- 55C / Z+20C 10 2 4 16 2 3 Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20C. Marking Black print on the case top. Capacitance change tan Leakage current 0.5 MAX. E 0.5 to 0.8 Positive Negative 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 5 2.1 5.3 5.3 1.3 6.3 2.4 6.6 6.6 2.2 8 3.3 8.3 8.3 2.3 4 5 5 6.3 6.3 8 8 5.0 2.6 2.6 1.3 1.3 0.8 0.8 50 Hz 0.35 120 Hz 0.50 6 7 1 8 2 3 9 10 4 5 6 11 12 13 14 7 8 9 10 11 12 13 14 Capacitance tolerance (20%) Capacitance tol Rated capacitance (10F) Rated capa Rated voltage (16V) Rated (mm) D A B C E 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 6.3 2.4 6.6 6.6 2.2 8 3.3 8.3 8.3 2.3 Series name Type Voltage mark for 6.3V is 6V. 10 1A 50 80 80 115 115 150 150 5 5 6.3 6.3 8 8 300 Hz 0.64 1 kHz 0.83 4t GS Taping code 2.6 2.6 1.3 1.3 0.8 0.8 16 1C 80 80 115 115 150 150 4 5 5 6.3 6.3 8 8 5.0 2.6 2.6 1.3 1.3 0.8 0.8 25 1E 50 80 80 115 115 150 150 4 4 5 6.3 6.3 6.3 8 8 5.0 5.0 2.6 1.3 1.3 1.3 0.8 0.8 50 50 80 115 115 115 150 150 4 4 4 4 4 5 5 6.3 6.3 8 8 Case size D (mm) 35 1V 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 0.8 0.8 50 50 50 50 50 80 80 115 115 150 150 Impedance Rated ripple Max. Impedance () at 20C 100kHz Rated ripple current (mArms) at 105C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 5 Configuration Negative 6.3 0J V Code 4 Voltage mark for 6.3V is 6V. 0.5 to 0.8 Dimensions 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 B C E A0.2 A0.2 E 6.20.3 0.5 to 0.8 Cap. (F) A C0.2 B 0.2 6.20.3 4 1.8 4.3 4.3 1.0 A0.2 A0.2 0.5 MAX. B+- 0.2 D0.5 A2P 100 16V D0.5 Lot No. 3 8 (mm) Positive D 0.5 MAX. 105C Marking Plastic platform Plastic platform Capacitance C0.2 0.3 MAX. 0.3 MAX. Voltage Voltage Trade mark 2 Negative Negative E +0.1 -0.2 0.5 to 0.8 1 D WCF L1 1CG1B 0 0 M C L 1 G Code B U W F 1 C 1 0 0U M 4 to 6.3 GB A0.2 A0.2 0.5 MAX. E 5.4 A0.2 A0.2 B0.2 +0.1 -0.2 (8) C0.2 B0.2 D0.5 A2P 10 16V D0.5 X2P 10 16V X2P 100 16V o. 0.3 MAX. Voltage C0.2 0.3 MAX. 5.4 Positive Plastic platformPositive Plastic platform Capacitance Lot No. Voltage Within 10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Type numbering system (Example : 16V 10F) 105C Marking C Marking citance e mark Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C. Chip Type Marking 35 2 3 Endurance (4 to 6.3) citance o. 25 2 3 10 kHz or more 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please select UJ(p.160) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UWF1A151MBR1GS UWF1V470MCL1GS UWF0J221MCL1GS UWF0J101MCL1GB UWF1C100MCL1GB UWF1E680MCL1GS UWF1V100MCL1GB UWF1A101MCL1GS UWF1C220MCL1GB UWF1C470MCL1GB UWF1E330MCL1GB UWF1V2R2MCL1GB UWF0J330MCL1GB UWF0J470MCL1GB UWF0J680MCL1GB UWF0J151MCL1GS UWF1A220MCL1GB UWF1A330MCL1GB UWF1A470MCL1GB UWF1A680MCL1GB UWF1A151MCL1GS UWF1C150MCL1GB UWF1C330MCL1GB UWF1C680MCL1GS UWF1E150MCL1GB UWF1E470MCL1GS UWF1V010MCL1GB UWF1V1R5MCL1GB UWF1V3R3MCL1GB UWF1V4R7MCL1GB UWF1V6R8MCL1GB UWF1V150MCL1GB UWF1V330MCL1GS UWF1C101MCL1GS UWF1E100MCL1GB UWF1E220MCL1GB UWF1E4R7MCL1GB UWF1V220MCL1GB UWF0J220MCL1GB UWF1E6R8MCL1GB