Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 1Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
Power General Purpose Snap-In
Fig. 1
FEATURES
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large types, very small dimensions, cylindrical
aluminum case insulated with a blue sleeve
• Useful life: 3000 h at 85 °C
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
• Consumer and industrial electronics
• Whitegood motor control
• Electronic drives
• SMPS/UPS
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code
• Name of manufacturer
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
• Code number (last 8 digits)
• Maximum operating temperature
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size (Ø D x L in mm) 22 x 25 to 35 x 50
Rated capacitance range
(E6/E12 series), CR56 μF to 2200 μF
Tolerance on CR± 20 %
Rated voltage range, UR160 V, 200 V, 250 V,
400 V, 450 V
Category temperature range - 25 °C to + 85 °C
Useful life at 85 °C 3000 h
Useful life at 40 °C
and 1.4 x IR applied 90 000 h
Shelf life at 0 V, 85 °C 1000 h
Based on sectional specification IEC 60384-4/EN130300/
W of JISC5141
159
199 059
157
197 057
105 °C 105 °C 105 °C
longer
life
longer
life
smaller
dimensions
smaller
dimensions
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
160 200 250 400 450
56----22x25
68 - - - 22 x 25 22 x 25
82 - - - 22 x 25 22 x 30
----25x25
100 - - - 22 x 30 22 x 35
- - - 25 x 25 25 x 30
120
----22x40
- - - 22 x 35 25 x 30
- - - 25 x 35 30 x 25
150
22 x 25 22 x 25 22 x 25 22 x 35 -
- - - 25 x 30 25 x 35
- - - 30 x 25 30 x 30
Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 2Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram
180
22 x 25 22 x 25 22 x 25 22 x 40 -
- - - 25 x 35 25 x 40
- - - 30 x 25 30 x 30
----35x30
220
22 x 25 22 x 25 22 x 30 - -
- - 25 x 25 25 x 40 30 x 35
- - - 30 x 30 35 x 30
-----
270
22 x 25 22 x 25 22 x 30 - 30 x 40
- - 25 x 25 30 x 35 35 x 35
---35x30-
-----
330
22 x 25 22 x 30 22 x 35 25 x 50 30 x 50
- 25 x 25 25 x 30 30 x 40 35 x 40
- - 30 x 25 35 x 30 -
390
22 x 30 22 x 30 22 x 40 30 x 45 30 x 50
- 25 x 25 25 x 35 35 x 35 35 x 50
--30x25--
470
22 x 30 22 x 35 - 30 x 50 35 x 50
25 x 25 25 x 30 25 x 40 35 x 40 -
- 30 x 25 30 x 30 - -
560
25 x 25 22 x 40 25 x 40 35 x 45 -
30 x 25 25 x 35 - - -
- 30 x 25 30 x 35 - -
680
25 x 30 25 x 40 25 x 50 35 x 50 -
30 x 25 30 x 30 30 x 40 - -
--35x30--
820
25 x 35 - 30 x 45 - -
- 30 x 35 35 x 35 - -
-35x30- - -
1000 25 x 40 30 x 40 30 x 50 - -
30 x 30 35 x 35 35 x 40 - -
1200 30 x 35 30 x 45 35 x 50 - -
35 x 30 35 x 35 - - -
1500 35 x 35 35 x 50 35 x 50 - -
1800 30x50----
35x40----
2200 35 x 50 35 x 50 - - -
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
160 200 250 400 450
+ TERMINAL
- TERMINAL
Ø D
L + 2
max.
L
Bottom view 6.3 + 0
- 1
The minus terminal can be marked with an imprinted sign.
10 ± 0.1
Ø 2 ± 0.1 (2 x)
Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 3Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 1
Notes
(1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz
• Unless otherwise specified, all electrical values in table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ORDERING EXAMPLE
Electrolytic capacitor 197 series
1000 μF/200 V; ± 20 %
Nominal case size: Ø 30 mm x 40 mm
Ordering code: MAL2 197 22102 E3
Former 12NC: 2222 197 22102
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL CASE SIZE
Ø D x L Ø DMAX. LMAX. MASS
(g)
PACKAGING
QUANTITIES
CARDBOARD BOX DIMENSIONS
LxWxH
22 x 25 22.5 26.5 12 216 280 x 240 x 140
22 x 30 22.5 31.5 16 216 280 x 240 x 140
22 x 35 22.5 36.5 20 144 280 x 240 x 105
22 x 40 22.5 41.5 23 144 280 x 240 x 105
22 x 45 22.5 46.5 26 144 280 x 240 x 140
22 x 50 22.5 51.5 29 72 280 x 240 x 105
25 x 25 25.5 26.5 20 216 280 x 240 x 140
25 x 30 25.5 33.5 22 216 280 x 240 x 140
25 x 35 25.5 36.5 24 144 280 x 240 x 105
25 x 40 25.5 41.5 27 144 280 x 240 x 105
25 x 45 25.5 46.5 32 144 280 x 240 x 140
25 x 50 25.5 51.5 38 144 280 x 240 x 140
30 x 25 30.5 28.5 25 168 280 x 240 x 140
30 x 30 30.5 33.5 30 168 280 x 240 x 140
30 x 35 30.5 38.5 35 112 280 x 240 x 105
30 x 40 30.5 42.5 40 112 280 x 240 x 105
30 x 45 30.5 47.5 45 112 280 x 240 x 140
30 x 50 30.5 52.5 50 112 280 x 240 x 140
35 x 25 35.5 26.5 33 126 280 x 240 x 140
35 x 30 35.5 33.5 40 126 280 x 240 x 140
35 x 35 35.5 36.5 48 84 280 x 240 x 105
35 x 40 35.5 42.5 55 84 280 x 240 x 105
35 x 45 35.5 47.5 63 84 280 x 240 x 140
35 x 50 35.5 52.5 72 84 280 x 240 x 140
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 120 Hz
IRRated RMS ripple current at 120 Hz, 85 °C
IL5 Max. leakage current after 5 min at UR
ESR Max. equivalent series resistance at 120 Hz (1)
Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 4Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
120 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L (mm)
IR
120 Hz
85 °C (A)
IL5
5min
(mA)
MAX. ESR
120 (1)
()
ORDERING CODE
MAL2197.......
160
150 22 x 25 0.92 0.48 1.11 11151E3
180 22 x 25 0.99 0.58 0.92 11181E3
220 22 x 25 1.08 0.70 0.75 11221E3
270 22 x 25 1.16 0.86 0.61 11271E3
330 22 x 25 1.24 1.06 0.50 11331E3
390 22 x 30 1.45 1.25 0.43 11391E3
470 22 x 30 1.53 1.50 0.35 11471E3
470 25 x 25 1.45 1.50 0.35 21471E3
560 30 x 25 1.67 1.50 0.30 31561E3
680 25 x 30 1.82 1.50 0.24 21681E3
680 30 x 25 1.70 1.50 0.24 31681E3
820 25 x 35 2.04 1.50 0.20 21821E3
1000 30 x 30 2.07 1.50 0.17 31102E3
1000 35 x 30 2.24 1.50 0.17 41102E3
1200 30 x 35 2.28 1.50 0.17 21122E3
1200 35 x 30 2.22 1.50 0.17 31122E3
1500 35 x 35 2.42 1.50 0.15 21152E3
1500 35 x 40 2.72 1.50 0.13 31152E3
1800 30 x 50 3.08 1.50 0.11 11182E3
1800 35 x 40 2.66 1.50 0.13 21182E3
2200 35 x 50 3.25 1.50 0.10 41222E3
200
150 22 x 25 1.06 0.60 1.11 12151E3
180 22 x 25 1.15 0.72 0.92 12181E3
220 22 x 25 1.24 0.88 0.75 12221E3
270 22 x 25 1.34 1.08 0.61 12271E3
330 22 x 30 1.58 1.32 0.50 12331E3
330 25 x 25 1.53 1.32 0.50 22331E3
390 25 x 25 1.59 1.50 0.45 22391E3
470 22 x 35 1.92 1.50 0.35 12471E3
470 25 x 30 1.92 1.50 0.35 22471E3
470 30 x 25 1.86 1.50 0.38 32471E3
560 25 x 35 2.16 1.50 0.30 22561E3
560 30 x 25 1.90 1.50 0.34 32561E3
680 25 x 40 2.44 1.50 0.24 22681E3
680 30 x 30 2.28 1.50 0.27 32681E3
820 30 x 35 2.55 1.50 0.24 32821E3
820 35 x 30 2.52 1.50 0.26 42821E3
1000 30 x 40 2.84 1.50 0.20 22102E3
1000 35 x 35 2.79 1.50 0.22 32102E3
1200 30 x 45 3.16 1.50 0.17 12122E3
1200 35 x 35 2.77 1.50 0.21 22122E3
1500 35 x 50 3.72 1.50 0.15 22152E3
2200 35 x 50 3.70 1.50 0.11 12222E3
250
150 22 x 25 1.07 0.75 1.11 13151E3
180 22 x 25 1.16 0.90 0.92 13181E3
220 22 x 30 1.36 1.10 0.75 13221E3
220 25 x 25 1.34 1.10 0.75 23221E3
270 22 x 30 1.47 1.35 0.61 13271E3
270 25 x 25 1.42 1.35 0.61 23271E3
330 22 x 35 1.70 1.50 0.50 13331E3
330 25 x 30 1.71 1.50 0.50 23331E3
330 30 x 25 1.68 1.50 0.50 33331E3
390 22 x 40 1.92 1.50 0.43 13391E3
390 25 x 35 1.92 1.50 0.43 23391E3
390 30 x 25 1.74 1.50 0.43 33391E3
470 25 x 40 2.17 1.50 0.35 23471E3
470 30 x 30 2.07 1.50 0.35 33471E3
560 25 x 40 2.28 1.50 0.27 53561E3
560 30 x 35 2.32 1.50 0.30 33561E3
680 25 x 50 2.73 1.50 0.24 13681E3
680 30 x 40 2.60 1.50 0.24 23681E3
680 35 x 30 2.36 1.50 0.27 33681E3
820 30 x 45 2.90 1.50 0.20 13821E3
820 35 x 35 2.61 1.50 0.24 23821E3
1000 30 x 50 3.21 1.50 0.17 13102E3
1000 35 x 40 2.89 1.50 0.21 23102E3
1200 35 x 50 3.49 1.50 0.19 13122E3
1500 35 x 50 3.56 1.50 0.19 13152E3
Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 5Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz
400
68 22 x 25 0.57 0.55 3.66 16689E3
82 22 x 25 0.62 0.66 3.03 16829E3
100 22 x 30 0.73 0.80 2.49 16101E3
100 25 x 25 0.73 0.80 2.49 26101E3
120 22 x 35 0.84 0.96 2.07 16121E3
120 25 x 35 0.89 0.96 2.07 26121E3
150 22 x 35 0.93 1.20 1.66 16151E3
150 25 x 30 0.94 1.20 1.66 26151E3
150 30 x 25 0.96 1.20 1.66 36151E3
180 25 x 35 1.07 1.44 1.38 26181E3
180 30 x 25 1.03 1.44 1.38 36181E3
220 25 x 40 1.23 1.50 1.13 26221E3
220 30 x 30 1.21 1.50 1.13 36221E3
270 30 x 35 1.38 1.50 0.92 26271E3
270 35 x 30 1.41 1.50 0.92 36271E3
330 30 x 40 1.57 1.50 0.75 26331E3
330 35 x 30 1.49 1.50 0.78 36331E3
390 30 x 45 1.75 1.50 0.64 16391E3
390 35 x 35 1.67 1.50 0.66 26391E3
470 30 x 50 1.96 1.50 0.53 16471E3
470 35 x 40 1.87 1.50 0.56 26471E3
560 35 x 45 2.08 1.50 0.47 16561E3
680 35 x 50 2.31 1.50 0.39 16681E3
450
56 22 x 25 0.53 0.28 4.44 17569E3
68 22 x 25 0.58 0.34 3.66 17689E3
82 22 x 30 0.68 0.41 3.03 17829E3
82 25 x 25 0.68 0.41 3.03 27829E3
100 22 x 35 0.78 0.50 2.49 17101E3
100 25 x 30 0.80 0.50 2.49 27101E3
120 22 x 40 0.89 0.60 2.07 17121E3
120 25 x 30 0.86 0.60 2.07 27121E3
120 30 x 25 0.89 0.60 2.07 37121E3
150 25 x 35 1.00 0.75 1.66 27151E3
150 30 x 30 1.05 0.75 1.66 37151E3
180 25 x 40 1.14 0.90 1.38 27181E3
180 30 x 30 1.13 0.90 1.38 37181E3
180 35 x 30 1.22 0.90 1.38 47181E3
220 30 x 35 1.29 1.10 1.13 27221E3
220 35 x 30 1.32 1.10 1.13 37221E3
270 30 x 40 1.47 1.35 0.92 17271E3
330 30 x 50 1.74 1.50 0.75 17331E3
330 35 x 40 1.69 1.50 0.75 27331E3
390 35 x 50 1.97 1.50 0.64 27391E3
470 35 x 50 2.10 1.50 0.53 17471E3
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage
400 V versions US= 1.1 x UR
250 V versions US= 1.15 x UR
Reverse voltage 1V -
Current
Leakage current After 5 min at URIL5 0.02 CR x UR or 1.5 mA,
whichever is smaller
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
120 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L (mm)
IR
120 Hz
85 °C (A)
IL5
5min
(mA)
MAX. ESR
120 (1)
()
ORDERING CODE
MAL2197.......
Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 6Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 3
Note
(1) Impedance ratio shall not exceed the given values
Table 4
Note
(1) 0.15 for Ø D = 35 mm
RIPPLE CURRENT AND USEFUL LIFE
Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load
LOW TEMPERATURE CHARACTERISTIC (at 120 Hz)
DESCRIPTION UR (V) (1)
160 200 250 400 450
Impedance ratio Z(- 25 °C)/Z(+ 20 °C) 4 4 4 4 4
DISSIPATION FACTOR (tan at 120 Hz, 20 °C)
DESCRIPTION UR (V)
160 200 250 400 450
tan (max.) 0.10 (1) 0.10 (1) 0.10 (1) 0.15 0.15
1.3
1.2
1.1
1.0
0.8
0.5
0.0
40 50 60 70 80 90
IA
IR
MGA453
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
(1)
45
60
30
20
10
8
5
4
3
2
2.5
1.5
1
1.2
15
Tamb (°C)
life multiplier
IA = Actual ripple current at 120 Hz
IR = Rated ripple current at 120 Hz and 85 °C
(1) Useful life at 85 °C and IR applied: 3000 h
Not for New Design
197 PGP-SI
www.vishay.com Vishay BCcomponents
Revision: 12-Oct-11 7Document Number: 28343
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 5
Table 6
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
IR MULTIPLIER
160 V TO 250 V 400 V AND 450 V
60 0.81 0.90
100 0.97 0.95
120 1.00 1.00
500 1.32 1.20
1000 1.45 1.30
10 000 1.50 1.40
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Useful life CECC 30301
subclause 1.8.1
Tamb =85°C; U
R and IR applied:
3000 h
C/C: ± 30 %
ESR 3 x spec. limit
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage: 3 %
Shelf life
(storage at
high temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 85 °C; no voltage applied;
1000 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C: ± 20 %
ESR 2 x spec. limit
IL5 1 x spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
