Revised August 2000 74F32 Quad 2-Input OR Gate General Description This device contains four independent gates, each of which performs the logic OR function. Ordering Code: Order Number Package Number 74F32SC 74F32SJ 74F32MTC 74F32PC Package Description M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC14 N14A 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Unit Loading/Fan Out Pin Names Description U.L. Input IIH/IIL HIGH/LOW Output IOH/IOL An, Bn Inputs 1.0/1.0 20 A/-0.6 mA On Outputs 50/33.3 -1 mA/20 mA (c) 2000 Fairchild Semiconductor Corporation DS009463 www.fairchildsemi.com 74F32 Quad 2-Input OR Gate April 1988 74F32 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Storage Temperature -65C to +150C Ambient Temperature under Bias -55C to +125C Free Air Ambient Temperature Junction Temperature under Bias -55C to +150C Supply Voltage 0C to +70C +4.5V to +5.5V -0.5V to +7.0V VCC Pin Potential to Ground Pin Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0 mA Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output -0.5V to VCC 3-STATE Output -0.5V to +5.5V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Current Applied to Output in LOW State (Max) Note 2: Either voltage limit or current limit is sufficient to protect inputs. twice the rated IOL (mA) ESD Last Passing Voltage (Min) 4000V DC Electrical Characteristics Symbol Parameter Min Typ Max VCC Units VIH Input HIGH Voltage VIL Input LOW Voltage 0.8 V VCD Input Clamp Diode Voltage -1.2 V Min V Min VOH Output HIGH Voltage VOL Output LOW 2.0 10% VCC 2.5 5% VCC 2.7 V 10% VCC Input HIGH Current IBVI Input HIGH Current Breakdown Test ICEX Output HIGH Leakage Current VID Input Leakage IOD IOH = -1 mA 0.5 V Min IOL = 20 mA 5.0 A Max VIN = 2.7V 7.0 A Max VIN = 7.0V 50 A Max VOUT = VCC V 0.0 3.75 A 0.0 -0.6 mA Max VIN = 0.5V -150 mA Max VOUT = 0V 4.75 Test Recognized as a LOW Signal IIN = -18 mA IOH = -1 mA Voltage IIH Conditions Recognized as a HIGH Signal Output Leakage Circuit Current IID = 1.9 A All Other Pins Grounded VIOD = 150 mV All Other Pins Grounded IIL Input LOW Current IOS Output Short-Circuit Current ICCH Power Supply Current 6.1 9.2 mA Max VO = HIGH ICCL Power Supply Current 10.3 15.5 mA Max VO = LOW -60 AC Electrical Characteristics Symbol Parameter TA = +25C TA = -55C to +125C TA = 0C to +70C VCC = +5.0V VCC = +5.0V VCC = +5.0V CL = 50 pF CL = 50 pF CL = 50 pF Min Typ Max Min Max Min Max tPLH Propagation Delay 3.0 4.2 5.6 3.0 7.5 3.0 6.6 tPHL An, Bn to On 3.0 4.0 5.3 2.5 7.5 3.0 6.3 www.fairchildsemi.com 2 Units ns 74F32 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com 74F32 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 74F32 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 5 www.fairchildsemi.com 74F32 Quad 2-Input OR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6