LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS263C - AUGUST 1999 - REVISED MARCH 2000 D D D D D LMV324 . . . D OR PW PACKAGE (TOP VIEW) 2.7-V and 5-V Performance No Crossover Distortion Low Supply Current: LMV321 . . . 130 A Typ LMV358 . . . 210 A Typ LMV324 . . . 410 A Typ Rail-to-Rail Output Swing Package Options Include Plastic Small-Outline (D), Small-Outline Transistor (SOT-23 DBV, SC-70 DCK), and Thin Shrink Small-Outline (PW) Packages 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN- 4IN+ GND 3IN+ 3IN- 3OUT LMV358 . . . D OR PW PACKAGE (TOP VIEW) description 1OUT 1IN- 1IN+ GND The LMV324 and LMV358 are low-voltage (2.7 V to 5.5 V) versions of the dual and quad operational amplifiers, LM324 and LM358, that operate from 5 V to 30 V. The LMV321 is the single-amplifier version. The LMV321, LMV324, and LMV358 are the most cost-effective solutions for applications where low-voltage operation, space saving, and low price are needed. They offer specifications that meet or exceed those of the familiar LM358 and LM324 devices. These devices have rail-to-rail output-swing capability, and the input common-mode voltage range includes ground. They all exhibit excellent speed-to-power ratios, achieving 1MHz of bandwidth at 1-V/s slew rate with low supply current. 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN- 2IN+ LMV321 . . . DBV OR DCK PACKAGE (TOP VIEW) 1IN+ 1 GND 2 IN- 3 5 VCC+ 4 OUT The LMV321 is available in the ultra-small DCK package, which is approximately one-half the size of the DBV package. This package saves space on printed circuit boards and enables the design of small portable electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity. The LMV321I, LMV324I, and LMV358I devices are characterized for operation from -40C to 85C. symbol (each amplifier) - IN - OUT + IN + Copyright 2000, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS263C - AUGUST 1999 - REVISED MARCH 2000 AVAILABLE OPTIONS TA -40C to 85C PACKAGE TYPE PACKAGED DEVICES SINGLE DUAL QUADRUPLE 5-pin SOT LMV321IDCKR LMV321IDBVR -- -- -- -- 8-pin SOIC 8-pin TSSOP -- -- LMV358ID LMV358IPWR -- -- 14-pin SOIC 14-pin TSSOP -- -- -- LMV324ID LMV324IPWR The D package is available taped and reeled. Add the suffix R to the device type (e.g., LMV324DR). The DCK, DBV, and PW packages are only available left-end taped and reeled. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Input voltage, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5.5 V Duration of output short circuit (one amplifier) to ground at (or below) TA = 25C, VCC 5.5 V (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Package thermal impedance, JA (see Notes 4 and 5): D (8-pin) package . . . . . . . . . . . . . . . . . . . . . 197C/W D (14-pin) package . . . . . . . . . . . . . . . . . . . 127C/W DBV package . . . . . . . . . . . . . . . . . . . . . . . . 347C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . . 389C/W PW (8-pin) package . . . . . . . . . . . . . . . . . . . 243C/W PW (14-pin) package . . . . . . . . . . . . . . . . . . 170C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or PW package . . . . . . . . . . . . . . 260C DBV or DCK package . . . . . . . . . . . . . TBD Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND. 2. Differential voltages are at IN+ with respect to IN-. 3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Selecting the maximum of 150C can impact reliability. 5. The package thermal impedance is calculated in accordance with JESD 51. recommended operating conditions VCC TA 2 MIN MAX Supply voltage (single-supply operation) 2.7 5.5 V Operating free-air temperature -40 85 C POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS263C - AUGUST 1999 - REVISED MARCH 2000 electrical characteristics at TA = 25C and VCC+ = 2.7 V (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX 1.7 7 UNIT VIO Input offset voltage aVIO Average temperature coefficient of input offset voltage IIB IIO Input bias current 11 250 nA Input offset current 5 50 nA CMRR Common-mode rejection ratio kSVR Supply-voltage rejection ratio VCM = 0 to 1.7 V VCC = 2.7 V to 5 V, VICR Common-mode input voltage range CMRR Output swing RL = 10 k to 1.35 1 35 V w 50 dB High level Low level Supply current B1 Unity-gain bandwidth Fm 50 63 dB 50 60 dB 0 to 1.7 -0.2 to 1.9 V VCC-100 VCC-10 60 180 80 170 LMV358I (both amplifiers) 140 340 LMV324I (all four amplifiers) 260 680 LMV321I ICC mV/C 5 VO = 1 V CL = 200 pF Phase margin mV mV mA 1 MHz 60 deg Gm Gain margin 10 dB Vn In Equivalent input noise voltage f = 1 kHz 46 nV/Hz Equivalent input noise current f = 1 kHz 0.17 pA/Hz POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS263C - AUGUST 1999 - REVISED MARCH 2000 electrical characteristics at specified free-air temperature range, VCC+ = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage aV Average temperature coefficient of input offset voltage IO IIB Input bias current IIO Input offset current CMRR Common-mode rejection ratio kSVR Supply-voltage rejection ratio VICR Common-mode input voltage range TEST CONDITIONS VCM = 0 to 4 V VCC= 2.7 V to 5 V, VO = 1 V, VCM = 1 V CMMR w 50 dB High level RL = 10 k to 2.5 25V Low level RL = 2 k Sourcing, VO = 0 V 25C 5 25C 15 4 CL = 200 pF nA nA 65 dB 25C 50 60 dB 25C 0 to 4 -0.2 0 2 to 4.2 42 V 25C VCC-300 VCC-400 VCC-40 -40C to 85C 25C 120 -40C to 85C 25C -40C to 85C VCC-10 65 -40C to 85C mV 180 280 25C 15 -40C to 85C 10 100 5 60 10 160 130 V/mV mA 250 350 210 -40C to 85C 25C 300 400 VCC-100 VCC-200 25C 25C LMV324I (all four amplifiers) 50 150 -40C to 85C LMV358I (both amplifiers) 250 50 25C Supply current mV mV/C 500 5 UNIT 25C 25C Sinking, VO = 5 V LMV321I ICC 7 9 25C Output swing Output short-circuit short circuit current MAX 1.7 -40C to 85C Low level IOS TYP -40C to 85C RL = 2 k to 2 2.5 5V AVD MIN -40C to 85C High level Large-signal g g differential voltage gain TA 25C 440 615 410 -40C to 85C mA 830 1160 B1 Unity-gain bandwidth 25C 1 MHz fm Phase margin 25C 60 deg Gm Gain margin 25C 10 dB Vn In Equivalent input noise voltage f = 1 kHz 25C 39 nV/Hz Equivalent input noise current f = 1 kHz 25C 0.21 pA/Hz SR Slew rate 25C 1 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 V/ms IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 2000, Texas Instruments Incorporated