2007-04-03 Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.0 SFH 314, SFH 314 FA SFH 314 SFH 314 FA Features: Besondere Merkmale: * Spectral range of sensitivity: 460 nm...1080 nm (SFH 314), 740 nm... 1080 nm (SFH 314 FA) * Package: 5mm Radial (T 1 3/4), Epoxy * Special: High linearity * Spektraler Bereich der Fotoempfindlichkeit: 460 nm...1080 nm (SFH 314), 740 nm... 1080 nm (SFH 314 FA) * Gehause: 5mm Radial (T 1 3/4), Harz * Besonderheit: Hohe Linearitat Applications Anwendungen * * * * Computer-controlled flashes Photointerrupters Industrial electronics For control and drive circuits * * * * Computer-Blitzlichtgerate Lichtschranken Industrieelektronik Messen / Steuern / Regeln Ordering Information Bestellinformation Type: Photocurrent Ordering Code Typ: Fotostrom Bestellnummer = 950 nm, Ee = 0.5 mW/cm2, VCE = 5 V IPCE [A] SFH 314 630 Q62702P1668 SFH 314-2/3 1000 ... 3200 Q62702P3600 SFH 314 FA 630 Q62702P1675 SFH 314 FA-2/3 1000 ... 3200 Q62702P3599 Note: Only one bin within one packing unit (variation less than 2:1) Anm.: Nur eine Gruppe pro Verpackungseinheit (Streuung kleiner 2:1) 2007-04-03 1 Version 1.0 SFH 314, SFH 314 FA Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating and storage temperature range Betriebs- und Lagertemperatur Top; Tstg Collector-emitter voltage Kollektor-Emitter-Spannung SFH 314 SFH 314 FA -40 ... 100 C VCE 70 V Collector current Kollektorstrom IC 50 mA Collector surge current Kollektorspitzenstrom ( < 10 s) ICS 100 mA Emitter-collector voltage Emitter-Kollektor-Spannung VEC 7 Total power dissipation Verlustleistung Ptot 200 mW Thermal resistance Warmewiderstand RthJA 375 K/W V Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit SFH 314 SFH 314 FA Wavelength of max. sensitivity Wellenlange der max. Fotoempfindlichkeit S max 850 870 nm Spectral range of sensitivity Spektraler Bereich der Fotoempfindlichkeit 10% 460 ... 1080 740 ... 1080 nm Radiant sensitive area Bestrahlungsempfindliche Flache A Dimensions of chip area Abmessung der Chipflache LxW Half angle Halbwinkel 2007-04-03 2 0.55 mm2 1 x 1 mm x mm 40 Version 1.0 SFH 314, SFH 314 FA Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit SFH 314 SFH 314 FA Capacitance Kapazitat (VCE = 5 V, f = 1 MHz, E = 0) CCE 10 pF Dark current Dunkelstrom (VCE = 10 V, E = 0) ICE0 3 ( 200) nA Rise and fall time Anstiegs- und Abfallzeit (IC = 1 mA, VCC = 5 V, RL = 1 k) tr, tf 11 s 2007-04-03 3 Version 1.0 SFH 314, SFH 314 FA Grouping (TA = 25 C, = 950 nm) Gruppierung Group Min Photocurrent Max Photocurrent Typ Photocurrent Rise and fall time Gruppe Min Fotostrom Max Fotostrom Typ Fotostrom Ee = 0.5 mW/cm2, VCE = 5 V Ee = 0.5 mW/cm2, VCE = 5 V SFH 314: IC = 1 mA, EV = 1000 lx, Std. VCC = 5 V, Light A, VCE = 5 V RL = 1 k Anstiegs- und Abfallzeit IPCE, min [A] IPCE, max [A] IPCE [A] tr, tf [s] -1 630 1250 3400 8 -2 1000 2000 5400 10 -3 1600 3200 8600 12 -4 2500 13500 14 Group Collector-emitter saturation voltage Gruppe Kollektor-Emitter Sattigungsspannung IC = IPCEmin x 0.3, Ee = 0.5 mW/cm2 VCEsat [mV] -1 150 -2 150 -3 150 -4 150 Note.: IPCEmin is the min. photocurrent of the specified group. Anm.: IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 2007-04-03 4 Version 1.0 SFH 314, SFH 314 FA Relative Spectral Sensitivity Relative spektrale Empfindlichkeit SFH 314 FA Srel = f() Relative Spectral Sensitivity Relative spektrale Empfindlichkeit SFH 314 Srel = f() OHF02332 100 OHF02331 100 S rel % S rel % 80 80 70 60 60 50 40 40 30 20 20 10 0 0 400 400 500 600 700 800 900 nm 1100 600 800 1000 nm 1200 Photocurrent Fotostrom IPCE = f(VCE), Ee = Parameter Photocurrent Fotostrom IPCE = f(Ee), VCE = 5 V OHF02339 10 1 mA OHF02338 10 1 mA PCE mW 1 2 cm PCE 0.5 10 0 mW cm 2 0.25 10 -1 mW cm 2 10 0 0.1 mW cm 2 10 -2 10 -3 -3 10 2007-04-03 10 -2 mW/cm 2 Ee 10 -1 10 0 5 0 10 20 30 40 50 V 70 VCE Version 1.0 SFH 314, SFH 314 FA Dark Current Dunkelstrom ICEO = f(VCE), E = 0 Photocurrent Fotostrom IPCE / IPCE(25C)= f(TA), VCE = 5 V PCE OHF01524 1.6 OHF02341 10 2 nA PCE 25 CEO 1.4 10 1 1.2 1.0 10 0 0.8 0.6 10 -1 0.4 0.2 0 -25 10 -2 0 25 50 75 C 100 TA 0 OHF02342 10 3 nA CEO 30 40 50 V 70 V CE C CE 15 10 1 10 10 0 5 20 40 60 0 -2 10 80 C 100 TA 6 OHF02344 20 pF 10 2 2007-04-03 20 Collector-Emitter Capacitance Kollektor-Emitter Kapazitat CCE = f(VCE), f = 1 MHz, E = 0 Dark Current Dunkelstrom ICEO = f(TA), E = 0 10 -1 0 10 10 -1 10 0 10 1 V 10 2 VCE Version 1.0 SFH 314, SFH 314 FA Total Power Dissipation Verlustleistung Ptot = f(TA) Ptot OHF02340 250 mW 200 150 100 50 0 0 20 40 60 80 C 100 TA Directional Characteristics Winkeldiagramm Srel = f() 40 30 20 10 0 OHF02329 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2007-04-03 1.0 0.8 0.6 0.4 0 7 20 40 60 80 100 120 Version 1.0 SFH 314, SFH 314 FA Package Outline Mazeichnung Area not flat 1.8 (0.071) 4.0 (0.157) 1.2 (0.047) 29.5 (1.161) 27.5 (1.083) 3.4 (0.134) Cathode (Diode) Collector (Transistor) 5.9 (0.232) 5.5 (0.217) 0.6 (0.024) 0.4 (0.016) Chip position GEXY6630 Dimensions in mm (inch). / Mae in mm (inch). 2007-04-03 o4.8 (0.189) 2.54 (0.100) spacing 5.5 (0.217) o5.1 (0.201) 6.1 (0.240) 5.7 (0.224) 0.8 (0.031) 0.4 (0.016) 0.6 (0.024) 0.4 (0.016) 6.9 (0.272) 8 Version 1.0 SFH 314, SFH 314 FA TTW Soldering Wellenloten (TTW) IEC-61760-1 TTW / IEC-61760-1 TTW OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-04-03 9 s 250 Version 1.0 SFH 314, SFH 314 FA Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2007-04-03 10 Version 1.0 SFH 314, SFH 314 FA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2007-04-03 11