Ordering information Three phase input type(1-stage filter) JAC series(6-30A) JAC -30 -683 1 2 3 -O 4 1 Model Name 2 Rated Current 3 Line to ground capacitor code:See table 1.1. R table1.1 Line to ground capacitor code Code 103 223 683 Line to ground Leakage Current capacitor (Input 250/500V 60Hz) (nominal value) 0.5mA/1.0 mA max 10,000pF 1.0mA/2.0 mA max 22,000pF 2.5mA/5.0 mA max 68,000pF *When the line to ground capacitor code is different, the attenuation characteristic is different. *Please contact us about ultra high attenuation type for EU (Wye type with neutral earth system). The terminal cover is retracted inside the unit DIN rail installation type is option 4 Option D:DIN rail installation type * The dimensions change when the option is set. Refer to External view. H:Ultra high-attenuation type Features of JAC series Compact and low profile , common mode EMI/EMC filters in 150kHz to 1MHz(1stage filter) - Three Phase 500 VAC - Push down type terminal block Specifications No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Items Rated Voltage[V] Rated Current[A] Test Voltage (Terminal-Mounting Plate) Isolation Resistance (Terminal-Mounting Plate) Leakage current 250/500V 60Hz DC resistance Safety agency approval temperatures Operating temperature Operating humidity Storage temperature/humidity Vibration Impact Safety agency approvals 14 Case size (without projection) 15 Weight JAC-06-683 JAC-10-683 JAC-20-683 JAC-30-683 AC Three Phase 500 (voltage range:528 max) 50/60Hz 6 10 20 30 2,500 VAC (Cutoff Current = 100mA), 1minute at room temperature and humidity 500 VDC 100MW min at room temperature and humidity 2.5mA/5.0mA max 100mW max 45mW max 15mW max 8mW max -25 to +85C (Refer to Derating Curve) -40 to +85C (Refer to Derating Curve) 20 to 95%RH (Non condensing) -40 to +85C/20 to 95%RH (Non condensing) 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis 196.1m/s2 (20G), 11ms Once each X, Y and Z axis UL1283, CSA C22.2 No.8 (C-UL) , DIN EN60939 VDE0565 Teil3-1, ENEC 63X44X132 mm (WXHXD) (Option: -D refer to external view) [2.48X1.73X5.20 inches] (WXHXD) 440g max Circuit Diagram 100 Case LOAD 1 4 2 5 3 6 CX CX CX CX CX CX CY CY CX : Line to line capacitor CY : Line to ground capacitor : Mounting Plate Load Factor [%] LINE Derating Curve 80 70 60 40 20 10 0 -40 -30 -20 40 50 60 Ambient Temperature [ ] JAC-1 70 80 90 JAC series(6-30A) External view As this product is adopted push-down type terminal block, this appearance is as follows. 1The terminal cover is retracted inside the unit. 2The screws for connecting the terminals are held in the up right position. Standard Type 132 Terminal Cover [5.20] 119 (Terminal Block screw pitch) 2-f5.5 [0.22] Mounting Hole [0.10] 63 [2.48] 50 [1.97] 9.7 [0.52] [0.38] Name Plate 3-M4 32 [1.26] 3-M4 Output Terminal Input Terminal 13.3 2.5 [4.69] Mounting Plate 118 (Mounting Hole pitch) M4 Protection Earth [4.61] 2 [0.08] Terminal cover Tolerance : 1[0.04] Weight : 440g max Mounting Plate : Iron(surface finishing : nickel plating) t=1.0[0.04] Case : PBT Dimensions in mm, [ ]=inches Terminal block screw tighting torque M4 : 1.6N-m(16.9kgf-cm)max 8 4.5 [0.31] 44 [1.73] Close the terminal cover 4.5 [0.18] [0.18] DIN rail installation Type 9 2 132 [5.20] Terminal Cover [0.35] 119 (Terminal Block screw pitch) 2.5 [4.69] [2.48] 63 9.7 Name Plate [0.52] 13.3 32 [1.26] 3-M4 Output Terminal [0.38] 3-M4 Input Terminal [0.10] Mounting Plate M4 Protection Earth 2 [0.08] Terminal cover 4.5 DIN rail [0.18] Tolerance : 1[0.04] Weight : 440g max Mounting Plate : Iron(surface finishing : nickel plating) t=1.0[0.04] Case : PBT Dimensions in mm, [ ]=inches Terminal block screw tighting torque M4 : 1.6N-m(16.9kgf-cm)max 4.5 [0.18] Note when installing the EMI/ EMC Filter on a DIN rail. When the EMI/EMC Filter is grounded through the DIN rail, the proper noise attenuation may not be achieved. Be sure to connect the protection earth (PE) of the EMI/EMC Filter body to the earth. [0.28] [0.31] 7 (9) 8 44 [1.73] Close the terminal cover DIN rail Name Plate JAC-2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cosel: JAC-30-683 JAC-06-683 JAC-10-683 JAC-20-683