09-2010, Rev. 0910
www.tycoelectronics.com
© 2010 Tyco Electronics Ltd.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.tycoelectronics.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Axicom
Signal Relays
n Direct coil control with TTL-signals possible
n Highly reliable switching
n High switching rates
n Ultrasonic cleanable
n High vibration and shock resistance
Typical applications
Incircuit tester, measuring and control systems, telecom equipment, alarm
and security equipment
Approvals
UL File No. 111441
Technical data of approved types on request
Contact Data form A form C
Contact arrangement 1 form A (1 NO), 1 form C (CO)
2 form A (2 NO)
Max. switching voltage
at rated coil voltage 5VDC 200VDC/VACpeak 175VDC
at rated coil voltage 12to 24VDC 200VDC/VACpeak 175VDCpeak
Limiting continuous current 1A 1.2A
Switching power 10W, 10VA 3W, 3VA
Contact material Ruthenium
Contact style reed contact
Initial contact resistance <150mΩ
Operate / release time max. 0.75/0.15ms 1.1/1.6ms
Electrical endurance
at 12V/10mA 50x106 operations
at 24V/400mA 5x106 operations
Coil Data
Magnetic system neutral
Coil voltage range 5 to 24VDC
Max. coil temperature 105°C
Thermal resistance < 75K/W
Coil versions, monostable
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
05 5VDC 3.5 0.75 500 50
12 12VDC 8.4 1.80 1000 144
15 15VDC 10.5 2.25 2000 112
24 24VDC 16.8 3.60 2000 288
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil versions, limiting operate voltage
Coil DIP flat, DIP flat DIP high DIP high DIP high Mini SIL
code SIL, 1 form A 1 form C 2 form A 1 form C 1 form A
1 form A with diode std,diode diode+
shield
VDC VDC VDC VDC VDC VDC
05 22.0 14.0 13.0 14.0 14.5 13.6
12 33.0 25.0 22.0 25.0 23.5 21.6
15 44.0 47.0 44.0 47.0 14.5 -
24 44.0 47.0 44.0 47.0 49.0 -
All figures are given for coil without pre-energization, at ambient temperature +23°C
Coil Data (continued)
Coil operative range
Coil operative range graphs
UI Minimum voltage at 23°C after pre-energizing with rated voltage
without contact current
UII Maximum continous voltage at 23°C
The operating voltage limits UI and UII depend on the temperature according to
the formula:
UI tamb KIxUI 23°C and
UII tamb KIlxUIl 23°C
tamb Ambient temperature
UI tamb Minimum voltage at ambient temperature, tamb
UII tamb Maximum voltage at ambient temperature, tamb
KI , KII Factors (dependent on temperature), see diagram
Reed Relay V23100 -V4
108-98011 Rev. C
All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
DIP version high: 2 form a contact, standard
5 3.5 14 0.75 125 200 V23100-V4305-B000 1-1393763-8
12 8.4 25 1.80 288 500 V23100-V4312-B000 2-1393763-6
15 10.5 47 2.25 112 2000 V23100-V4315-B000 3-1393763-2
24 16.8 47 3.60 288 2000 V23100-V4324-B000 3-1393763-8
DIP version high: 2 form a contact, with diode
5 3.5 14 0.75 125 200 V23100-V4305-B010 1-1393763-9
12 8.4 25 1.80 288 500 V23100-V4312-B010 2-1393763-7
15 10.5 47 2.25 112 2000 V23100-V4315-B010 3-1393763-3
24 16.8 47 3.60 288 2000 V23100-V4324-B010 3-1393763-9
DIP version high: 1 form c contact, with diode
5 3.5 14.5 0.75 125 200 V23100-V4305-C010 2-1393763-2
12 8.4 23.5 1.80 288 500 V23100-V4312-C010 3-1393763-0
15 10.5 14.5 2.25 112 2000 V23100-V4315-C010 3-1393763-6
24 16.8 49.0 3.60 288 2000 V23100-V4324-C010 4-1393763-2
DIP version high: 1 form c contact, with diode and electrostatic shield
5 3.5 14.5 0.75 125 200 V23100-V4305-C011 2-1393763-3
12 8.4 23.5 1.80 288 500 V23100-V4312-C011 3-1393763-1
15 10.5 14.5 2.25 112 2000 V23100-V4315-C011 3-1393763-7
24 16.8 49.0 3.60 288 2000 V23100-V4324-C011 4-1393763-3
UI = Minimum voltage at 23 °C after
preenergizing with nominal
voltage without contact current
UII = Maximum continous voltage at 23 °C
The operating voltage limits UI and UII depend on the
temperature according to the formula:
UI tamb = KI · UI 23 °C
and
UII tamb = KIl · UIl 23 °C
tamb = Ambient temperature
UI tamb = Minimum voltage at ambient
temperature, tamb
UII tamb = Maximum voltage at ambient
temperature, tamb
kI , kII = Factors (dependent on temperature),
see diagram
Ambient temperature tamb [°C]
Z