GBJ15005 - GBJ1510 15A GLASS PASSIVATED BRIDGE RECTIFIER Features * * * * * * Glass Passivated Die Construction GBJ High Case Dielectric Strength of 1500VRMS Low Reverse Leakage Current Surge Overload Rating to 240A Peak L Ideal for Printed Circuit Board Applications K UL Listed Under Recognized Component Index, File Number E94661 * A M B Lead Free Finish/RoHS Compliant (Note 4) S _ Mechanical Data J * * H N P D Case: GBJ C R Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 * * Moisture Sensitivity: Level 1 per J-STD-020C * * * * * * Lead Free Plating (Tin Finish). I Dim Min Max A 29.70 30.30 B 19.70 20.30 C 17.00 18.00 D 3.80 4.20 E 7.30 7.70 G 9.80 10.20 H 2.00 2.40 I 0.90 1.10 J 2.30 2.70 3.0 X 45 K Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208 e3 G E E L 4.40 4.80 M 3.40 3.80 N 3.10 3.40 P 2.50 2.90 Mounting: Through Hole for #6 Screw R 0.60 0.80 Mounting Torque: 5.0 in-lbs Maximum S 10.80 11.20 Polarity: Molded on Body All Dimensions in mm Marking: Type Number Weight: 6.6 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Output Current @ TC = 100C Symbol GBJ 15005 GBJ 1501 GBJ 1502 GBJ 1504 GBJ 1506 GBJ 1508 GBJ 1510 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 15 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load IFSM 240 A Forward Voltage (per element) @ IF = 7.5A DC VFM 1.05 V Peak Reverse Current at Rated DC Blocking Voltage @ TC = 25C @ TC = 125C IR 10 500 A I2 t 240 A2 s CT I2 t Rating for Fusing (t < 8.3ms) (Note 1) Typical Total Capacitance per Element (Note 2) Typical Thermal Resistance, Junction to Case (Note 3) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 60 pF RqJC 0.8 C/W Tj, TSTG -65 to +150 C Non-repetitive, for t > 1ms and < 8.3 ms. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. Thermal resistance from junction to case per element. Unit mounted on 300 x 300 x 1.6mm copper plate heat sink. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21219 Rev. 7 - 2 1 of 3 www.diodes.com GBJ15005 - GBJ1510 a Diodes Incorporated Resistive or inductive load With heatsink IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 15 10 5.0 Without heatsink 0 40 120 80 TC, CASE TEMPERATURE (C) Fig. 1 Forward Current Derating Curve Tj = 25C 10 1.0 0.1 0.01 0 0.4 1.2 1.6 2.0 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 160 100 250 Single Half-Sine Wave CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0 100 200 100 10 Tj = 25C Tj = 25C 0 1 10 1.0 100 f = 1 MHz 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current 1000 Tj = 125C 100 Tj = 100C 10 Tj = 50C 1.0 Tj = 25C 0.1 0 DS21219 Rev. 7 - 2 20 40 60 80 100 120 PERCENT OF PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics 2 of 3 www.diodes.com GBJ15005 - GBJ1510 Ordering Information Notes: (Note 5) Device Packaging Shipping GBJ15005-F GBJ 15/Tube GBJ1501-F GBJ 15/Tube GBJ1502-F GBJ 15/Tube GBJ1504-F GBJ 15/Tube GBJ1506-F GBJ 15/Tube GBJ1508-F GBJ 15/Tube GBJ1510-F GBJ 15/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21219 Rev. 7 - 2 3 of 3 www.diodes.com GBJ15005 - GBJ1510