Amphenol Miniature Cylindrical
Connectors
12-070-14
Meets MIL-C-26482, Series 1
Specifications
®
Amphenol
Table of Contents Page No.
Introduction, Amphenol® Miniature Cylindrical
General Information, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . 2
PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 (Solder)
General Information, Specifications, Service Class . . . . . . . . . . . 4, 5
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . 6
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . 7
PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 8
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . 9
PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . 10
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . 11
PT Connectors with Printed Circuit Board Contacts -
box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . 12
PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . 13
General Information, Specifications - PT hermetic . . . . . . . . . . . . 14
PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . . . . 15
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . 16
PT07H (MS3114H) hermetic jam nut receptacle. . . . . . . . . . . . . 17
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . 18
PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-C-26482, Series 1 (Crimp)
General Information, Specifications, Service Class . . . . . . . . . 20, 21
PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . . 22
MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . 23
PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . . . . 24
PT02SE (MS3122) SP02SE box mounting receptacle. . . . . . . . . . 25
MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . 26
PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . . . 27
PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . . . . 28
PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . . . 29
PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . . 30
PT-CE, SP-CE (Crimp)
General Information, Specifications, Service Class . . . . . . . . . 32, 33
PT00CE, SP00CE wall mounting receptacle. . . . . . . . . . . . . . . 34
PT01CE, cable connecting receptacle . . . . . . . . . . . . . . . . . . 35
PT02CE, SP02CE box mounting receptacle. . . . . . . . . . . . . . . 36
PT06CE, SP06CE straight plug . . . . . . . . . . . . . . . . . . . . . 37
PT07CE, SP07CE jam nut receptacle . . . . . . . . . . . . . . . . . . 38
PT08CE, SP08CE 90 degree plug . . . . . . . . . . . . . . . . . . . . 39
PT-CE, SP-CE how to order . . . . . . . . . . . . . . . . . . . . . . . 40
PC, PC-SE, PC-CE (Solder and Crimp)
General Information, Specifications, Service Class . . . . . . . . . 42, 43
PC00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . 44
PC01 cable connecting receptacle . . . . . . . . . . . . . . . . . . . 45
PC02 box mounting receptacle . . . . . . . . . . . . . . . . . . . . . 46
PC06 straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PC07 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . 48
General Information, Specifications - PC hermetic . . . . . . . . . . . 49
PCIH hermetic solder mounting receptacle . . . . . . . . . . . . . . . 50
PC02H hermetic box mounting receptacle. . . . . . . . . . . . . . . . 51
PC07H hermetic jam nut receptacle . . . . . . . . . . . . . . . . . . . 52
PC how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Miniature Cylindrical Specials . . . . . . . . . . . . . . . . . . . . . . . . . 54
Miniature Cylindrical -
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . 58-61
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-66
Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Contacts, Power Crimp and Thermocouples. . . . . . . . . . . . . . . 68
Contacts, Shielded Coax. . . . . . . . . . . . . . . . . . . . . . . 69-74
Mounting Recommendations. . . . . . . . . . . . . . . . . . . . . . . 75
Amphenol Sales Office and Authorized Distributor Listing . . . . . . . . . . . 76
This catalog covers the complete line of Amphe-
nol® Miniature Cylindrical Connectors. MS
approved and proprietary configurations are
included to give the user the largest selection of
miniature cylindrical connectors available in the
market place.
The catalog is divided by connector series and is
prefixed with an overview of the characteristics of
each series to help the user in determining selec-
tions.
If more information is needed concerning the con-
nectors covered in this publication, or if there are
special application needs, please contact:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5351
www.amphenol-industrial.com
www.amphenol-aerospace.com
NOTE:
The connector products in this brochure were for-
merly known as Bendix® products. These prod-
ucts are now manufactured and sold under the
Amphenol® brand name. The name “Amphenol”
will replace the name “Bendix” on products and lit-
erature in the future.
NOTE:
The Miniature MIL-C-26482, Series 2 connectors
PTS-DR and MS/PTS-DR (formerly in this cata-
log) are no longer supplied with these designa-
tions. Amphenol now supplies the Amphenol®/
Matrix® MIL-C-26482, Series 2. (Military numbers
include MS3470 - MS3472, MS3474, - MS3476).
Please refer to page 54 for a brief description of
the Amphenol®/Matrix® MIL-C-26482, Series 2
bayonet coupling connectors with crimp, rear
insertable and rear releasable contacts, and ask
for catalog 12-071 for detailed information on this
series.
Amphenol Aerospace is a Certified ISO 9001
Manufacturer.
1
PT
MIL-C-26482, Series 1
Amphenol Miniature Cylindrical
Proprietary/MIL-C-26482, Series 1
PT-SE
MIL-C-26482, Series 1
SP
DESIGN CHARACTERISTICS
• Medium size, widely used cylindrical
• Operating voltage to 1,000 VAC (RMS) at sea level
• Environment resistant
• Quick positive three point bayonet lock coupling
system
• Visual confirmation of complete coupling
• Five key/keyway polarization
• PT solder is UL Recognized under file #E115497,
Vol. 1, Section 5
CUSTOMER OPTIONS
• Seven mounting styles provide optimum design
flexibility
• Ten shell sizes 6 through 24
• Solder or crimp front or rear release contacts
• Size 20 through 12 contacts accept wire sizes 20
through 12 AWG
• Various finishes provide protection in a wide variety of
corrosive and mechanical environments
- Availability of zinc cobalt* non-cadmium plating
• Coaxial and thermocouple contact options
• Hermetic seal (glass fused) receptacles
• Double stub threaded coupling series available
• Alternate positioning
Amphenol® Miniature Cylindrical connectors offer twice the
number of contacts in just half the size of a Standard connector.
These miniature connectors, are available in several series,
each with varying design characteristics and customer options
to meet cost considerations and provide maximum design flexi-
bility. Two of the Miniature Family series, MS/PT and MS/PT-SE,
are MS approved and qualified to MIL-C-26482, Series 1.
The Miniature family consists of three basic series: PT, SP and
PC. In all series, pin and socket contacts are machined from low
loss copper alloy and gold plated to eliminate contact corrosion
and provide an indefinite shelf life. All series incorporate closed
entry socket contacts. The PT, SP and PC series are provided
with factory installed solder contacts. Printed circuit board con-
tacts are available in the PT Series box mount and jam nut style
receptacles.
The PT, SP and PC series are also available with removable
crimp contacts incorporating either of two types of retention
systems. The suffix “SE” or “CE” refers to the type of retention
system employed. MS approved “SE” types utilize a spring
tower retention system, while the proprietary “CE” types utilize
a nylon wafer retention system to maintain contact position.
Hermetically sealed receptacles are available in the PT and PC
series.
Note:
Please refer to page 54 for a brief description of the Amphenol®/Matrix® MIL-C-
26482, Series 2 bayonet coupling connectors with crimp, rear insertable and
rear releasable contacts, and ask for catalog 12-071 for detailed information on
this series.
* For more information on zinc cobalt plating for connectors ask for Amphenol
Product Data Sheet #172.
®
2
The accompanying chart is provided to assist the user in selecting
the appropriate type of miniature connector to meet the application
requirements. Further information can be found in specific sections
of this catalog.
RI/FR = Rear Insertion/Front Releasable
RI/RR = Rear Insertion/Rear Releasable
† o intermates with o
X intermates with X
†† Optional finishes available. See “how to order” sections.
* Available in hermetic version
** Dual mounting holes
*** This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
CHARACTERISTICS
Solder Crimp
PT MS/PT SP PC
MS/
PT-SE PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE
Intermateable† o o o X o o o X o o X
Contacts Solder ••••
Crimp RI/FR • ••••••
Crimp RI/RR
Contact Retention
System
Non-Removable ••••
Removable • ••••••
Coupling Bayonet ••• ••• ••
Threaded •••
Standard Finishes†† Olive Drab Cadmium (003) •• •• •
Electroless Nickel (023)
Anodic Coated (005) •••
Bright Cadmium (001) •••
Temperature Range Resilient Dielectric (125°C) •••••••••••
Hard Dielectric (175°C & 200°C)
Wide Mounting Flange •••
Hermetic Seal ••••
SHELL STYLE AVAILABILITY
Wall Mounting Receptacle “00” •••••**•••••
Cable Connecting Receptacle “01” *** •• ••• •• •
Box Mounting Receptacle “02” *•• • *••**•••••
Straight Plug “06” •••••••••••
Jam Nut Receptacle “07” *•*••*• • ••••••
Thru-bulkhead Receptacle “TB” ••
Solder Mount Receptacle “I” *• *• *•
90° Plug “08” • • • •••••
Amphenol Miniature Cylindrical
connector selection guide
®
3
PT
SP
MS/PT
installation
data
4
wall mounting receptacle
Amphenol PT, SP, MS/PT
Proprietary/MIL-C-26482, Series 1
solder type
cable connecting receptacle*
box mounting receptacle
straight plug
jam nut receptacle
thru bulkhead receptacle
Amphenol® solder contact miniature cylindrical connectors
meet the most critical application needs. Design versatility
combined with high reliability performance makes these
series of Miniature Cylindrical Connectors ideal for envi-
ronmental sealing or pressurized applications.
The MS/PT Series is qualified to MIL-C-26482, Series 1 and
has all the outstanding design characteristics and quality of the
PT Series. The SP Series is a modification of the PT, providing
special shells with a wide mounting flange for back panel
mounting.
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromate after-treatment is used on the
PT and MS/PT. The SP is given a durable non-conductive hard
anodic “Alumilite”® coating which provides abrasion protection
and resistance to corrosion.
Shell components for these series are aluminum. The depend-
able 5 key/keyway polarization with bayonet lock coupling
assures positive mating with no chance of cross plugging.
Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design. Printed circuit board contacts
are also available.
The PT, SP and MS/PT Series are intermateable and inter-
mountable with all existing Miniature Cylindrical Series connec-
tors except for the threaded coupling PC Series.
PT Solder is UL recognized under file #E115497, Volume 1,
Section 5.
Refer to pages 56-61 for insert arrangement availability.
PT, SP, MS/PT
† Silver plated wire per MIL-C-26482
* This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with a straight or 90 degree plug.
MIL-SPEC CONTACT DATA/CONNECTOR RATINGS
Contact Specifications
Contact
Size
Test
Current
Maximum
Millivolt Drop†
Solder Well
Diameter
Solder Well
Depth
20 7.5 55 .046 .125
16 13.0 50 .078 .188
Service Rating
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level
50,000
ft.
70,000
ft.
110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
®
+.004
–.000
+.031
–.000
+.005
–.003
+.031
–.000
5
PT, SP Service Classes
PT and SP connectors are available in the service classes listed
below. Each class, with the exception of hermetic, offers one or
more means of terminating or supporting a cable or wire bun-
dle. Class “W” is not available in the SP Series.
“A” General duty; back shell is threaded for conduit
attachment of MS3057 cable clamp
“A” (SR) General duty, with strain relief clamp for cable or wire
bundle support
“C” Pressurized receptacle; less than 1 cu. in. per hour
leakage at 30 psi over a temperature range of –65°F
to +257°F
“E” Environmental resistant connectors - supplied with a
multi-holed grommet and clamping nut for moisture-
proofing individual open wires
“E” (SR) Environmental resistant strain relief clamp and grom-
met for moisture proofing individual wires; provides
added wire bundle support
“J” Same as “W” class except with strain relief
“P” Translucent nylon boot for retaining customer-applied
potting compounds; held in place by a threaded ring
“P” (SR) Strain relief clamp suitable for retaining customer
applied potting compounds, with provision for wire
support
“W” Compressing clamp and neoprene gland for moisture
proofing multi-conductor jacketed cables. Telescoping
sleeves (MS 3420A) can be used to adapt to cables
smaller than minimum close-down.
“H”* Hermetically sealed with compression glass inserts
MS/PT Service Classes
The MS/PT Miniature connector is available in the following cer-
tified service classes:
“E” Environmental resistant connectors - supplied with a
multi-holed grommet and clamping nut for moisture-
proofing individual open wires
“F” Grommet seal with strain relief clamp
“P” Translucent nylon boot for retaining customer-applied
potting compounds; held in place by a threaded ring
* Refer to pages 14-17 for Hermetic versions.
“A” general duty
“E” (SR), MS / “F” strain relief
“E” MS / “E” open wire seal
“P”, MS / “P” potting boot
“W” cable seal
6
ND
L
ND
XL
TERMINATION ASSEMBLIES
“A” General Duty/
“C” Pressurized“
PT00A-XX-XXX
SP00A-XX-XXX
PT00C-XX-XXX
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT00A-XX-XXX (SR)
SP00A-XX-XXX (SR)
PT00E-XX-XXX (SR)
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
“E” Open Wire Seal
PT00E-XX-XXX
SP00E-XX-XXX
MS3110E-XX-XXX
“P” Potting Boot
PT00P-XX-XXX
SP00P-XX-XXX
MS3110P-XX-XXX
“W” Cable Seal
PT00W-XX-XXX
“J” Cable Seal
PT00J-XX-XXX
MS3110J-XX-XXX
To complete part number see how to order on page 18.
■(MMC) located within .0025 of (TP)
All dimensions for reference only.
Shell
Size
Receptacle Front View Receptacle Side View Class “A”, “C”
R
(TP)
S
Max. A
+.001
–.005
K +.020
–.010 L
Max.
M +.010
–.000 Q
Thread
Class 2A
Z
Max. D
Min.
L
Max.
N
Max.
V
Thread
Class APT SP PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF .468 .438 .175 1.553 .462 .3750-32 NEF
8 .594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF
10 .719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF .468 .438 .421 1.553 .717 .6250-24 NEF
12 .812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF .468 .438 .546 1.553 .834 .7500-20 UNEF
14 .906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF
16 .969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF .531 .438 .879 1.553 1.216 1.1875-18 NEF
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF .531 .531 1.014 1.703 1.332 1.1875-18 NEF
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF .531 .531 1.134 1.703 1.460 1.4375-18 NEF
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 NEF .498 .498 1.259 1.765 1.585 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
DL
Max.
N
Max.
XL
Max.Closed Free
6––– – – –1.266 .440 .192 1.438 .484 –––––
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985
PT00 (MS3110)
SP00
wall mounting receptacle
ND
V
L
.375 MIN
G
L
C
NDH
L
N
N
L
D
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
L
Q
M
A
KZ
4 Holes
7
ND
L
ND
XL
S
S
Y
A
K
Z
M
L
Q
TERMINATION ASSEMBLIES
“A” General Duty
PT01A-XX-XXX
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT01A-XX-XXX (SR)
PT01E-XX-XXX (SR)
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
“E” Open Wire Seal
PT01E-XX-XXX
MS3111E-XX-XXX
“P” Potting Boot
PT01P-XX-XXX
MS3111P-XX-XXX
“W” Cable Seal
PT01W-XX-XXX
“J” Cable Seal
PT01J-XX-XXX
MS3111J-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 18.
All dimensions for reference only.
Shell
Size
Recept. Front View Receptacle Side View Class “A”,
S
±.020
Y
±.020
A
+.001
–.005
K
+.020
–.010
L
Max.
M
+.016
–.000
Q
Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
V
Thread
Class A
6 .688 .812 .348 .494 .906 .400 .3125-32 NEF .948 .175 1.553 .462 .3750-32 NEF
8 .812 .938 .473 .494 .906 .400 .4375-28 UNEF .948 .297 1.553 .590 .5000-28 UNEF
10 .938 1.062 .590 .494 .906 .400 .5625-24 NEF .948 .421 1.553 .717 .6250-24 NEF
12 1.031 1.156 .750 .494 .906 .400 .6875-24 NEF .948 .546 1.553 .834 .7500-20 UNEF
14 1.125 1.250 .875 .494 .906 .400 .8125-20 UNEF .948 .663 1.553 .970 .8750-20 UNEF
16 1.219 1.344 1.000 .494 .906 .400 .9375-20 UNEF .948 .787 1.553 1.088 1.0000-20 UNEF
18 1.312 1.438 1.125 .494 .906 .400 1.0625-18 NEF .948 .879 1.553 1.216 1.1875-18 NEF
20 1.438 1.562 1.250 .650 1.125 .535 1.1875-18 NEF 1.166 1.041 1.703 1.332 1.1875-18 NEF
22 1.562 1.688 1.375 .650 1.125 .535 1.3125-18 NEF 1.166 1.135 1.703 1.460 1.4375-18 NEF
24 1.688 1.812 1.500 .683 1.188 .568 1.4375-18 NEF 1.166 1.259 1.765 1.585 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
DL
Max.
N
Max.
XL
Max.Closed Free
6––––––1.266 .440 .192 1.438 .484 –– – – –
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985
PT01 (MS3111)
cable connecting receptacle
ND
.375 MIN
V
L
G
L
C
NDH
L
N
N
L
D
8
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
* PT02W-XX-XXX
* SP02W-XX-XXX
To complete part number see how to order on page 18.
■(MMC) located within .0025 of (TP)
* The PT02 and SP02 box mounting receptacles are made only to complete a series;
no provision is made for accessories or potting on the rear skirt.
All dimensions for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S A
+.001
–.005
K
+.020
–.010 L
Max.
M
+.010
–.000 N
Dia.
Max.
Z
Max.
PT SP PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .825 .431 .462 .323 .465 .438
8 .594 .734 .812 1.047 .473 .493 .524 .825 .431 .462 .449 .465 .438
10 .719 .812 .938 1.125 .590 .493 .524 .825 .431 .462 .573 .465 .438
12 .812 .938 1.031 1.250 .750 .493 .524 .825 .431 .462 .699 .465 .438
14 .906 1.031 1.125 1.344 .875 .493 .524 .825 .431 .462 .823 .465 .438
16 .969 1.125 1.219 1.438 1.000 .493 .524 .825 .431 .462 .949 .465 .438
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .825 .431 .462 1.073 .465 .438
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497
PT02 (MS3112)
SP02
box mounting receptacle
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
AN
KZ
L
M
4 Holes
9
ND
L
ND
XL
TERMINATION ASSEMBLIES
“A” General Duty
PT06A-XX-XXX
SP06A-XX-XXX
PTG06A-XX-XXX
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT06A-XX-XXX (SR)
SP06A-XX-XXX (SR)
PTG06A-XX-XXX (SR)
PT06E-XX-XXX (SR)
SP06E-XX-XXX (SR)
PTG06E-XX-XXX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-XXX (SR)
PTG06P-XX-XXX (SR)
MS3116F-XX-XXX
“E” Open Wire Seal
PT06E-XX-XXX
SP06E-XX-XXX
PTG06E-XX-XXX
MS3116E-XX-XXX
“P” Potting Boot
PT06P-XX-XXX
SP06P-XX-XXX
PTG06P-XX-XXX
MS3116P-XX-XXX
“W” Cable Seal
PT06W-XX-XXX
SP06W-XX-XXX
PTG06W-XX-XXX
“J” Cable Seal
PT06J-XX-XXX
MS3116J-XX-XXX
* Available in PT06 only
All dimensions for reference only.
Shell
Size
Plug Front View Plug Side View Class “A”
S
Max. J
L
Max.
Q Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
V Thread
Class A
6 .625 .353 .906 .3125-32 NEF .594 .175 1.609 .462 .3750-32 NEF
8 .750 .353 .906 .4375-28 UNEF .594 .297 1.609 .590 .5000-28 UNEF
10 .859 .353 .906 .5625-24 NEF .594 .421 1.609 .717 .6250-24 NEF
12 1.013 .353 .906 .6875-24 NEF .594 .546 1.609 .834 .7500-20 UNEF
14 1.156 .353 .906 .8125-20 UNEF .594 .663 1.609 .970 .8750-20 UNEF
16 1.281 .353 .906 .9375-20 UNEF .594 .787 1.609 1.088 1.0000-20 UNEF
18 1.319 .353 .906 1.0625-18 NEF .594 .879 1.609 1.216 1.1875-18 NEF
20 1.531 .415 1.062 1.1875-18 NEF .672 1.014 1.656 1.332 1.1875-18 NEF
22 1.656 .415 1.062 1.3125-18 NEF .672 1.135 1.656 1.460 1.4375-18 NEF
24* 1.776 .415 1.125 1.4375-18 NEF .672 1.259 1.750 1.587 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
C
Thread
D
Min.
G
±.010
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
DL
Max.
N
Max.
XL
Max.Closed Free
6––– – – –1.266 .440 .192 1.526 .484 –––––
8 6-32 .240 .125 .812 1.906 .550 1.266 .560 .317 1.526 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.906 .675 1.266 .685 .434 1.526 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.906 .803 1.266 .813 .548 1.526 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.906 .920 1.266 .930 .673 1.526 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.526 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.526 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.250 1.290 1.438 1.301 1.024 1.546 1.360 .635 .747 2.844 1.322 3.610
22 8-32 .928 .750 1.625 2.250 1.418 1.438 1.430 1.149 1.546 1.484 .670 .846 3.000 1.449 3.766
24* 8-32 .990 .800 1.750 2.312 1.543 1.500 1.555 1.274 1.656 1.610 .740 .894 3.210 1.576 3.985
PT06 (MS3116)
SP06
straight plug
To complete part number see how to order on page 18.
S
L
ZQJ
ND
.375 MIN
V
L
G
L
C
NDH
L
N
N
L
D
10
TERMINATION ASSEMBLIES
“E” Open Wire Seal
PT07E-XX-XXX
SP07E-XX-XXX
MS3114E-XX-XXX
“A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief
PT07A-XX-XXX (SR)
SP07A-XX-XXX (SR)
PT07E-XX-XXX (SR)
MS3114F-XX-XXX
“P” Potting Boot
PT07P-XX-XXX
MS3114P-XX-XXX
* Size 24 strain relief available in PT only. All dimensions for reference only.
Shell
Size
Recept. Front View Receptacle Side View Class “E”, MS / “E”
H
±.016 S
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010 M
P Panel Thickness R
Thread
Class 2A UNEF Z
L
Max. M
N
Max.
Z
±.040Min. Max.
6 .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 .231 .568 .696 .604 .191
8 .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 .231 .568 .696 .729 .191
10 .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 .231 .568 .696 .854 .191
12 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 .231 .568 .696 .979 .191
14 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 .231 .568 .696 1.104 .191
16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 .231 .568 .696 1.229 .191
18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 .231 .568 .696 1.354 .191
20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 .261 .630 .884 1.510 .221
22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 .261 .630 .884 1.635 .221
24 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 .228 .660 .917 1.760 .188
Shell
Size
Class “A” (SR), “P” (SR), MS / “F” Class “E” (SR) Class “P”, MS / “P”
C
Thread
D
Max. G H L M
C
Thread
D
Max. G H L M
D
Max.
L +.010
–.026 M N Z
6––––––––––––.202 .593 .696 .484 .191
8 6-32 .250 .125 .781 1.062 .696 6-32 .250 .125 .775 1.029 .696 .327 .593 .696 .608 .191
10 6-32 .312 .188 .844 1.062 .696 6-32 .312 .188 .837 1.029 .696 .444 .593 .696 .734 .191
12 6-32 .438 .312 .969 1.062 .696 6-32 .438 .312 .963 1.029 .696 .558 .593 .696 .858 .191
14 6-32 .562 .375 1.094 1.062 .696 6-32 .562 .375 1.087 1.029 .696 .683 .593 .696 .984 .191
16 6-32 .625 .500 1.156 1.188 .696 6-32 .625 .500 1.150 1.161 .696 .808 .593 .696 1.110 .191
18 8-32 .750 .625 1.406 1.188 .696 8-32 .750 .625 1.400 1.161 .696 .909 .593 .696 1.234 .191
20 8-32 .750 .625 1.406 1.250 .884 8-32 .750 .625 1.400 1.224 .884 1.034 .718 .884 1.360 .221
22 8-32 .938 .750 1.594 1.250 .884 8-32 .938 .750 1.587 1.224 .884 1.159 .718 .884 1.484 .221
24* 8-32 1.000 .800 1.594 1.250 .917 8-32 1.000 .800 1.681 1.320 .917 1.284 .718 .917 1.610 .188
PT07 (MS3114)
SP07
jam nut receptacle
To complete part number see how to order on page 18.
“A” General Duty/
“C” Pressurized Receptacle
PT07A-XX-XXX
PT07C-XX-XXX
S
H
SJA
M
Z
RPK
JN
A
MZ
RPL
JA
MZ
C
RPL
GD H
JA
MZ
RPL
DN
11
D
C
B
E
L
A
H
K
L
TERMINATION ASSEMBLIES
“E” Open Wire Seal, “E” (SR) Strain Relief “P” Potting Boot 75 degrees
PT08E-XX-XXX
SP08E-XX-XXX
PT08E-XX-XXX (SR)
SP08E-XX-XXX (SR)
PT08P-XX-XXX
SP08P-XX-XXX
To complete part number see how to order on page 18.
All lockwire holes are .044 Dia. Min.
All dimensions for reference only.
Shell
Size
Plug Front View Plug Side View
G
Dia.
Max.
Class “E”, “E” (SR) Class “P”
B
±.031
C
+.010
–.025
D
±.062
E
+.047
–.025
L
±.057
A
±.025
H
±.015
K
±.015
L
Max.
8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656
10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781
12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843
14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953
16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000
18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046
20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218
22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265
24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624
PT08 E
SP08 E
90 degree plug
G
12
All dimensions for reference only.
Shell
Size
Part Number
PT07 with PCB
Contacts
Receptacle Front View Receptacle Side View
H
+.017
–.016
S
±.010
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010
M
±.010
P Panel
Thickness R
Thread
Class 2A
Z
+.025
–.035Min. Max.
6 71-533720-XXX .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 UNEF .376
8 71-533721-XXX .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 UNEF .376
10 71-533722-XXX .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 UNEF .376
12 71-533723-XXX 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 UNEF .376
14 71-533724-XXX 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF .376
16 71-533725-XXX 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 UNEF .376
18 71-533726-XXX 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 UNEF .376
20 71-533727-XXX 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 UNEF .367
22 71-533728-XXX 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 UNEF .367
24 71-533729-XXX 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 UNEF .334
PT Connectors with
Printed Circuit Board Contacts
All dimensions for reference only.
Jam Nut Receptacle (PT07)
with PCB Contacts
All lockwire holes are .044 Dia. Min.
Order by applicable 71- part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 56-61.
Shell
Size
Part Number
PT02 with PCB
Contacts
Receptacle Front View Receptacle Side View
R
(TP)
S
+.011
–.010
A
+.001
–.005
K
+.021
–.010
L
Max.
M
+.010
–.000
N
Dia.
Max.
Z
+.040
–.050
6 71-570120-XXX .469 .688 .348 .493 .825 .431 .323 .380
8 71-570121-XXX .594 .812 .473 .493 .825 .431 .449 .380
10 71-570122-XXX .719 .938 .590 .493 .825 .431 .573 .380
12 71-570123-XXX .812 1.031 .750 .493 .825 .431 .699 .380
14 71-570124-XXX .906 1.125 .875 .493 .825 .431 .823 .380
16 71-570125-XXX .969 1.219 1.000 .493 .825 .431 .949 .380
18 71-570126-XXX 1.062 1.312 1.125 .493 .825 .431 1.073 .380
20 71-570127-XXX 1.156 1.438 1.250 .650 1.076 .556 1.199 .286
22 71-570128-XXX 1.250 1.562 1.375 .650 1.076 .556 1.323 .286
24 71-570129-XXX 1.375 1.688 1.500 .683 1.109 .589 1.449 .253
Box Mounting Receptacle (PT02)
with PCB Contacts
Order by applicable 71- part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 56-61.
■(MMC) located within .0025 of (TP)
S
S
R
(TP)
R
(TP)
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
4 HOLES
AN
KZ
L
M
.030 ± .001
S
H
S
JA
MZ
RPK
.030 ± .001
13
* PTB-XX-XXX
* SPB-XX-XXX
* To complete part number add desired arrangement number (refer to pages 56 and 57 for insert availability) and add “PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
■(MMC) located within .0025 of (TP)
All dimensions for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S A
+.001
–.005
K
+.016
–.000
L
±.005
M
+.010
–.000
P
Max.
PTB SPB PTB SPB PTB SPB
6 .469 .641 .688 .953 .348 .625 1.050 .562 .125 .188
8 .594 .734 .812 1.047 .473 .625 1.050 .562 .125 .188
10 .719 .812 .938 1.125 .590 .625 1.050 .562 .125 .188
12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188
14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188
16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188
18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188
20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312
22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312
24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312
PTB
SPB
thru bulkhead receptacle
S
S
R
(TP)
R
(TP)
PTB
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SPB
.150 ± .005 Dia.
L
M
P
AA
K
4 Holes
14
solder mounting receptacle
box mounting receptacle
jam nut receptacle
Three shell styles are available in the hermetic PT series:
• PTIH (MS3113H)
•PT02H
• PT07H (MS3114H)
These hermetic connectors are only available with solder cup or
flat eyelet pin contacts in the MS/PT version. Socket contacts
are available in some proprietary PT versions. Other design
characteristics of the PT hermetic connector series are as fol-
lows:
Shell sizes: 8 through 24 (tin plated)
Contact count: 2 through 61. Refer to pages 56 and 57 for
insert availability for hermetics.
Current: 5.0 amp each #20 contact
10 amp each #16 contact
17 amp each #12 contact
Contacts are tin plated for PT; gold is optional
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at 15 psi differential
Physical Shock: 100 G’s
Vibration: Exceeds MIL-E-5272 Procedure II
Thermal Shock: No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 56-61 for insert arrangement availability.
PT
hermetic
15
* PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
† PTIH-XX-XXX (100)
†† PTIY-XX-XXX (100)
†† MS3113H-XXYXXX
All dimensions for reference only.
Shell
Size
Recept.
Front View
Receptacle
Side View
G
Dia.
Max.
A Dia.
+.001
–.005
L
+.025
–.016
N Dia.
+.001
–.005
W
+.011
–.010
Z
Max.
6 .511 .348 .447 .438 .094 .386
8 .636 .473 .447 .562 .094 .386
10 .761 .590 .447 .672 .094 .386
12 .855 .750 .447 .781 .094 .386
14 .980 .875 .447 .906 .094 .386
16 1.105 1.000 .447 1.031 .094 .386
18 1.229 1.125 .447 1.156 .094 .386
20 1.323 1.250 .509 1.250 .094 .386
22 1.449 1.375 .509 1.375 .125 .418
24 1.574 1.500 .542 1.500 .125 .418
PTIH (MS3113H)
hermetic solder mounting receptacle
To complete part number see how to order on page 18.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
†Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
G
AN
WL
Z
.031 +.006
–.005
16
* PT02H-XX-XXX
** PT02Y-XX-XXX
† PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
All dimensions for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP)
S
±.016
A Dia.
+.001
–.005
K
±.015
L
+.025
–.015
N Dia.
+.001
–.005
U
+.011
–.010
Z
Max.
6 .469 .688 .348 .047 .494 .438 .062 .344
8 .594 .812 .473 .047 .494 .562 .062 .344
10 .719 .938 .590 .047 .494 .672 .062 .344
12 .812 1.031 .750 .047 .494 .781 .062 .344
14 .906 1.125 .875 .047 .494 .906 .062 .344
16 .969 1.219 1.000 .047 .494 1.031 .062 .344
18 1.062 1.312 1.125 .047 .494 1.156 .062 .344
20 1.156 1.438 1.250 .047 .556 1.250 .062 .344
22 1.250 1.562 1.375 .079 .556 1.375 .062 .377
24 1.375 1.688 1.500 .079 .588 1.500 .062 .377
PT02H
hermetic box mounting receptacle
To complete part number see how to order on page 18.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
†Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
■(MMC) located within .0025 of (TP)
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
AN
WL
ZU
4 Holes
17
* PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
† PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
All dimensions for reference only.
Shell
Size
Receptacle Front
View Receptacle Side View
S
+.016
H Hex
+.017
–.016
A
+.001
–.005
K
+.043
–.016
M
+.031
–.000
P Panel Thickness R
Thread
Class 2A
Z
Max.Max. Min.
6 .812 .625 .348 .094 .696 .125 .062 .4375-28 UNEF .206
8 .938 .750 .473 .094 .696 .125 .062 .5625-24 NEF .206
10 1.062 .875 .590 .094 .696 .125 .062 .6875-24 NEF .206
12 1.250 1.062 .750 .094 .696 .125 .062 .8750-20 UNEF .206
14 1.375 1.188 .875 .094 .696 .125 .062 1.0000-20 UNEF .206
16 1.500 1.312 1.000 .094 .696 .125 .062 1.1250-18 NEF .206
18 1.625 1.438 1.125 .094 .696 .125 .062 1.2500-18 NEF .206
20 1.812 1.562 1.250 .125 .884 .250 .062 1.3750-18 NEF .081
22 1.938 1.688 1.375 .125 .884 .250 .062 1.5000-18 NEF .081
24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 NEF .048
PT07H (MS3114H)
hermetic jam nut receptacle
To complete part number see how to order on page 18.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
†Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
S
H
SA
MZ
RPK
18
PT, SP
To more easily illustrate ordering procedure, part number PT00A-20-
41PW(SR) is shown as follows:
PT 00 A - 20 - 41 P W (SR)
1 2345678
See code below:
1. Connector Type
“PT”designates standard olive drab, electrically conductive cad-
mium plated bayonet lock connector with solder contacts
“SP”designates electrically non-conductive, hard anodic coated
bayonet lock connector with solder contacts and larger flange
and mounting holes for back panel mounting
“PTG”designates plug with grounding fingers
2. Shell Style
“00”designates wall mounting receptacle
“01”designates cable connecting receptacle**
“02”designates box mounting receptacle
“06”designates straight plug
“07”designates jam nut receptacle
“08”designates 90 degree plug cable support
“B”designates thru bulkhead receptacle (pressurized)
“I”designates solder mount receptacle (Hermetic only)
3. Service Classes
“A”designates general duty back shell
“C”designates pressurized receptacle
“E”designates environmental resisting open wire seal with
grommet and nut
“J”designates clamp assembly for moisture proofing multi-
jacketed cables, with strain relief
“P”designates assembly with potting boot
“W”designates clamp assembly for moisture proofing multi-
jacketed cables
“H”designates hermetic* without interfacial seal
“Y”designates hermetic* with interfacial seal
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
5. Insert Arrangement
“20 - 41” designates insert arrangement. Refer to pages 56-61 for
insert availability.
6. Contacts
“P” designates pin contacts
“S” designates socket contacts
For ordering connectors with printed circuit board contacts, see pg. 12.
7. Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “nor-
mal position. No letter required for normal (no rotation) position.
8. “SR” designates a strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
(024) olive drab zinc cobalt plating
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(470) non-conductive black zinc cobalt plating with strain relief
(476) conductive black zinc cobalt plating with strain relief
(100) Suffix added for flat eyelet pin contacts in hermetic versions
MS/PT
MIL-C-26482, Series 1
Part number MS3110E20-41PW is shown as follows:
MS 311 0 E 20 - 41 P W
1 2345678
For Hermetic connectors part number MS3113H20Y41PW is shown as
follows:
MS 311 3 H 20 Y 41 P W
1 234 5, 6 78
See code below:
1. “MS” designates Military Standard
2. Specification Number
“311” designates basic family number for MIL-C-26482, Series 1 sol-
der type
3. Shell Style
“0” designates wall mounting receptacle
“1” designates cable connecting receptacle**
“2” designates box mounting receptacle
“3” designates solder mount receptacle (hermetic only)
“4” designates jam nut receptacle
“6” designates straight plug
4. Service Class
“E” designates environmental resisting connector
“F” designates environmental resisting connectors with strain relief
“J” designates clamp assembly for moisture proofing multi-jacketed
cables, with strain relief
“P” designates potted type with potting boot
“H” designates hermetic
5. Shell Size
“20” designates shell size. Shell sizes 8 through 24 available.
6. Insert Arrangement
“20-41” designates arrangement. Refer to pages 56-61 for insert
availability.
Hermetic version
“20Y41” designates insert arrangement; specify “Y” for flat eyelet pin
contacts, or “C” for solder cup pin contacts
7. Contact Configuration
“P” designates pin contacts
“S” designates socket contacts
8. Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “nor-
mal” position. No letter required for normal (no rotation) position.
* Hermetic connectors are supplied with tin plated shells.
**This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
PT, SP, MS/PT
how to order
