2
Type DK
Specications
Chip thermistor in DO-35 glass package
Options
• Other resistance values within the ranges
shown; e.g. code DKA302*2 for 3000 Ω
±2% at 77°F (25°C)
• Reference temperatures in the range 0°F
to 302°F (-18°C to 150°C)
• Operation to 572°F (300°C) (no solder
coating on wires)
• Wire lengths 0.16 in to 1.26 in (4 mm to
32 mm)
±0.04 in (±1 mm) for DK-N; up to 1.02 in
(26 mm) for DK-H
Coding
Replace * in the codes shown below as
follows:
• Axial, loose-packed: N
• Axial, bandoliered: B
• Radial, loose-packed: H
• Surface mount, loose-packed: M
R25 ΩMaterial
system
B 25/85 K Code
R25 ±2%
Code
R25 ±3%
Code
R25 ±5%
Code
R25 ±10%
2000 2 3540 ±1% DKA202*2 DKA202*3 DKA202*5 DKA202*10
5000 2 3540 ±1% DKA502*2 DKA502*3 DKA502*5 DKA502*10
10,000 2 3540 ±1% DKA103*2 DKA103*3 DKA103*5 DKA103*10
10,000 5A 3730 ±2% DKC103*3 DKC103*5 DKC103*10
12,000 5A 3730 ±2% DKC123*2 DKC123*3 DKC123*5 DKC123*10
10,000 33960 ±1% DKF103*2 DKF103*3 DKF103*5 DKF103*10
20,000 33960 ±1% DKF203*2 DKF203*3 DKF203*5 DKF203*10
30,000 33960 ±1% DKF303*2 DKF303*3 DKF303*5 DKF303*10
50,000 33960 ±1% DKF503*2 DKF503*3 DKF503*5 DKF503*10
100,000 33960 ±1% DKF104*2 DKF104*3 DKF104*5 DKF104*10
200,000 G 4263 ±2% DKG204*5 DKG204*10
500,000 D4573 ±2% DKD504*5 DKD504*10
1,000,000 D4573 ±2% DKD105*5 DKD105*10
Data
• Operating temperature: -40°F to 482°F (-40°C to 250°C)
• Thermal time constant: 7 seconds (cooling in air)
• Dissipation factor: 3.0 mW/K
• Mass: 0.2 g
• Packing/MOQ: 1000/box (loose),
5000/reel (bandoliered)
NTC Type DK wires should not be bent within 0.08 in (2 mm) of glass body
0.1 in (2.8 mm)
nominal
DK-N
0.08 in (2 mm)
maximum
0.02 in (0.5 mm)
nominal
0.08 in (2
mm)
nominal
0.16 in (4 mm)
maximum
1.06 in (27 mm)
minimum
0.2 in (4.2 mm)
maximum
Inside radius
0.05 in (1.2
mm)
nominal
0.8 in (19.5 mm) ±1
Ø 0.02 in (0.5 mm)
DK-H
See separate tables for resistance-temperature data..
Consult factory for additional tolerance requirements.