VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 1Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications (Reflow Soldering)
FEATURES
Manufactured with non-magnetic materials
Safety screened for magnetic properties
•C0G (NP0) and X7R / X5R dielectrics
Wide range of case sizes, voltage ratings,
and capacitance values
Suitable for reflow assembly methods
Wet built process
Reliable Noble Metal Electrode (NME) system
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Magnetic Resonance Imaging (MRI)
Medical test and diagnostic equipment
Laboratory analysis systems
Navigation and electronic test equipment
Audio amplifiers
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 1.0 pF to 39 nF
Voltage Range: 10 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Aging: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
200 VDC-rated: 250 % of rated voltage
500 VDC-rated: 200 % of rated voltage
630 VDC, 1000 VDC-rated: 150 % of rated voltage
1500 VDC to 3000 VDC-rated: 120 % of rated voltage
NON-MAGNETIC X7R / X5R
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC applied
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
6.3 V, 10 V ratings: 5 % maximum at 1.0 V
RMS
and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 V
RMS
and 1 kHz
50 V ratings: 2.5 % maximum at 1.0 V
RMS
and 1 kHz
Insulating Resistance:
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
200 VDC-rated: 250 % of rated voltage
500 VDC-rated: min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
1500 VDC, 3000 VDC-rated: 120 % of rated voltage
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 2Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Detail ratings see “Selection Chart”
QUICK REFERENCE DATA
DIELECTRIC CASE MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM MAXIMUM
C0G (NP0)
0402 100 1.0 pF 180 pF
0603 200 1.0 pF 1.5 nF
0805 500 1.0 pF 3.3 nF
1206 600 1.0 pF 10 nF
1210 500 1.0 pF 12 nF
1808 3000 27 pF 10 nF
1812 3000 27 pF 22 nF
1825 1000 15 pF 33 nF
2220 1000 100 pF 33 nF
2225 1000 120 pF 39 nF
X5R
0402 16 27 nF 47 nF
0603 6.3 120 nF 150 nF
X7R
0402 100 100 pF 22 nF
0603 100 270 pF 100 nF
0805 200 390 pF 390 nF
1206 500 680 pF 1.0 μF
1210 500 1.0 nF 1.0 μF
1808 3000 220 pF 270 nF
1812 3000 270 pF 1.0 μF
1825 1000 10 nF 2.7 μF
2220 3000 1.0 nF 2.2 μF
2225 2000 5.6 nF 4.7 μF
3640 500 15 nF 6.8 μF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 3Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) DC voltage rating should not be exceeded in application
(2) Selected values for X5R, see dielectric selection chart
(3) For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034
ORDERING INFORMATION
VJ0603 Y 102 K C A A C
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING
CODE NOMINAL CODE TOLERANCE RATING (1)
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
A = C0G
Y = X7R
G = X5R (2)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples
102 = 1000 pF
1R0 = 1.0 pF
C0G (NP0):
< 10 pF
C = ± 0.25 pF
D = 0.5 pF
B = ± 0.1 pF
10 pF
F = ± 1 %
G = ± 2 %
J = ± 5 %
K = ± 10 %
X5R / X7R:
J = ± 5 %
K = ± 10 %
M = ± 20 %
C (3) =
non-magnetic
copper barrier
termination
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
K = 75 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
F = 2000 V
H = 3000 V
A = unmarked
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
C = 7" reel / paper tape
P = 11 1/4" / 13" reel / paper tape
J = 7" reel (low quantity)
DIMENSIONS in inches (millimeters)
CASE
CODE STYLE LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
TERMINATIONS
(P)
MINIMUM MAXIMUM
0402 VJ0402 0.04 - 0.004 / + 0.005
(1.02 - 0.10 / + 0.12)
0.020 - 0.004 / + 0.006
(0.50 - 0.10 / + 0.14)
0.026
(0.64)
0.004
(0.10)
0.017
(0.42)
0603 VJ0603 0.063 - 0.006 / + 0.008
(1.60 - 0.15 / + 0.20)
0.031 - 0.006 / + 0.008
(0.80 - 0.15 / + 0.20)
0.037
(0.94)
0.012
(0.30)
0.022
(0.55)
0805 VJ0805 0.078 - 0.008 / + 0.010
(2.00 - 0.20 / + 0.25)
0.049 - 0.008 / + 0.009
(1.25 - 0.20 / + 0.23)
0.057
(1.45)
0.010
(0.25)
0.030
(0.76)
1206 VJ1206 0.126 - 0.010 / + 0.012
(3.20 - 0.25 / + 0.30)
0.063 - 0.010 / + 0.011
(1.60 - 0.25 / + 0.28)
0.067
(1.70)
0.010
(0.25)
0.030
(0.76)
1210 VJ1210 0.126 - 0.010 / + 0.012
(3.20 - 0.25 / + 0.30)
0.098 - 0.010 / + 0.011
(2.50 - 0.25 / + 0.28)
0.067
(1.70)
0.010
(0.25)
0.030
(0.76)
1808 VJ1808 0.177 - 0.012 / + 0.014
(4.50 - 0.30 / + 0.35)
0.078 - 0.010 / + 0.011
(2.03 - 0.25 / + 0.28)
0.086
(2.18)
0.010
(0.25)
0.035
(0.90)
1812 VJ1812 0.177 - 0.012 / + 0.014
(4.50 - 0.30 / + 0.35)
0.126 - 0.010 / + 0.011
(3.20 - 0.25 / + 0.28)
0.086
(2.18)
0.010
(0.25)
0.035
(0.90)
1825 VJ1825 0.177 - 0.012 / + 0.014
(4.50 - 0.30 / + 0.35)
0.252 - 0.010 / + 0.011
(6.40 - 0.25 / + 0.28)
0.086
(2.18)
0.010
(0.25)
0.035
(0.90)
2220 VJ2220 0.22 - 0.010 / + 0.012
(5.59 - 0.25 / + 0.30)
0.200 - 0.010 / + 0.011
(5.08 - 0.25 / + 0.28)
0.086
(2.18)
0.010
(0.25)
0.037
(0.95)
2225 VJ2225 0.22 - 0.010 / + 0.012
(5.59 - 0.25 / + 0.30)
0.250 - 0.010 / + 0.011
(6.35 - 0.25 / + 0.28)
0.086
(2.18)
0.010
(0.25)
0.037
(0.95)
3640 VJ3640 0.36 - 0.015 / + 0.017
(9.14 - 0.38 / + 0.43)
0.400 - 0.015 / + 0.017
(10.20 - 0.38 / + 0.43)
0.086
(2.18)
0.010
(0.25)
0.039
(1.00)
LW
T
MAX.
P
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 4Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC C0G (NP0)
STYLE VJ0402 VJ0603 VJ0805
CASE CODE 0402 0603 0805
VOLTAGE (VDC) 10 16 25 50 100 10 16 25 50 100 200 250 10 16 25 50 100 200 500
VOLTAGE CODE Q J X A B Q J X A B C P Q J X A B C E
CAP. CODE CAP.
1R0 1.0 pF •• •• •• •• •• ••••••••••••••
1R2 1.2 pF •• •• •• •• •• ••••••••••••••
1R5 1.5 pF •• •• •• •• •• ••••••••••••••
1R8 1.8 pF •• •• •• •• •• ••••••••••••••
2R2 2.2 pF •• •• •• •• •• ••••••••••••••
2R7 2.7 pF •• •• •• •• •• ••••••••••••••
3R3 3.3 pF •• •• •• •• •• ••••••••••••••
3R9 3.9 pF •• •• •• •• •• ••••••••••••••
4R7 4.7 pF •• •• •• •• •• ••••••••••••••
5R6 5.6 pF •• •• •• •• •• ••••••••••••••
6R8 6.8 pF •• •• •• •• •• ••••••••••••••
8R2 8.2 pF •• •• •• •• •• ••••••••••••••
100 10 pF •• •• •• •• •• ••••••••••••••
120 12 pF •• •• •• •• •• ••••••••••••••
150 15 pF •• •• •• •• •• ••••••••••••••
180 18 pF •• •• •• •• •• ••••••••••••••
220 22 pF •• •• •• •• •• ••••••••••••••
270 27 pF •• •• •• •• •• •••••• •••••••
330 33 pF •• •• •• •• •• •••••• •••••••
390 39 pF •• •• •• •• •• •••••• •••••••
470 47 pF •• •• •• •• •• •••••• •••••••
560 56 pF •• •• •• •• •• •••••• •••••••
680 68 pF •• •• •• •• •• •••••• •••••••
820 82 pF •• •• •• •• •• •••••• •••••••
101 100 pF •• •• •• •• •• •••••• •••••••
121 120 pF •• •• •• •• •• •••••• •••••••
151 150 pF •• •• •• •• •••••• •••••••
181 180 pF •• •• •• •• •••••• •••••••
221 220 pF •• •• •••••• •••••••
271 270 pF •••••• •••••••
331 330 pF ••••• •••••••
391 390 pF ••••• •••••••
471 470 pF •••• •••••••
561 560 pF •••• ••••••
681 680 pF •••• ••••••
821 820 pF •••• ••••••
102 1.0 nF •••• ••••••
122 1.2 nF •• •••••
152 1.5 nF •• •••••
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF
123 12 nF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 5Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC C0G (NP0)
STYLE VJ1206 VJ1210
CASE CODE 1206 1210
VOLTAGE (VDC) 16 25 50 100 200 500 600 25 50 100 200 500
VOLTAGE CODE J X A B C E N X A B C E
CAP. CODE CAP.
1R0 1.0 pF
1R2 1.2 pF
1R5 1.5 pF
1R8 1.8 pF
2R2 2.2 pF
2R7 2.7 pF
3R3 3.3 pF
3R9 3.9 pF
4R7 4.7 pF
5R6 5.6 pF
6R8 6.8 pF
8R2 8.2 pF
100 10 pF
120 12 pF
150 15 pF
180 18 pF
220 22 pF
270 27 pF
330 33 pF
390 39 pF
470 47 pF
560 56 pF
680 68 pF
820 82 pF
101 100 pF
121 120 pF
151 150 pF
181 180 pF
221 220 pF
271 270 pF
331 330 pF
391 390 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1.0 nF
122 1.2 nF
152 1.5 nF
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF
123 12 nF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 6Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC C0G (NP0)
STYLE VJ1808 VJ1812
CASE CODE 1808 1812
VOLTAGE (VDC) 25 50 100 200 500 630 1000 1500 2000 3000 25 50 100 200 500 630 1000 1500 2000 3000
VOLTAGE CODE X A B C E L G R F H X A B C E L G R F H
CAP. CODE CAP.
100 10 pF
120 12 pF
150 15 pF
180 18 pF
220 22 pF
270 27 pF
330 33 pF
390 39 pF
470 47 pF
560 56 pF
680 68 pF
820 82 pF
101 100 pF
121 120 pF
151 150 pF
181 180 pF
221 220 pF
271 270 pF
331 330 pF
391 390 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1.0 nF
122 1.2 nF
152 1.5 nF
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF
123 12 nF
153 15 nF
183 18 nF
223 22 nF
273 27 nF
333 33 nF
393 39 nF
473 47 nF
563 56 nF
683 68 nF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 7Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC C0G (NP0)
STYLE VJ1825 VJ2220 VJ2225
CASE CODE 1825 2220 2225
VOLTAGE (VDC) 25 50 100 200 500 630 1000 25 50 100 200 500 630 1000 25 50 100 200 500 630 1000
VOLTAGE CODE X A B C E L G X A B C E L G X A B C E L G
CAP. CODE CAP.
100 10 pF
120 12 pF
150 15 pF
180 18 pF
220 22 pF
270 27 pF
330 33 pF
390 39 pF
470 47 pF
560 56 pF
680 68 pF
820 82 pF
101 100 pF
121 120 pF
151 150 pF
181 180 pF
221 220 pF
271 270 pF
331 330 pF
391 390 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1.0 nF
122 1.2 nF
152 1.5 nF
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF
123 12 nF
153 15 nF
183 18 nF
223 22 nF
273 27 nF
333 33 nF
393 39 nF
473 47 nF
563 56 nF
683 68 nF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 8Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
(1) See selection chart for values only available as X5R. All other values X7R
SELECTION CHART
DIELECTRIC X7R / X5R (1)
STYLE VJ0402 VJ0603 VJ0805
CASE CODE 0402 0603 0805
VOLTAGE (VDC)6.3 10 16 25 50 100 6.3 10 16 25 50 100 10 16 25 50 100 200
VOLTAGE CODE Y Q J X A B Y Q J X A B Q J X A B C
CAP. CODE CAP.
101 100 pF •• •• •• •• •• ••
121 120 pF •• •• •• •• •• ••
151 150 pF •• •• •• •• •• ••
181 180 pF •• •• •• •• •• ••
221 220 pF •• •• •• •• •• ••
271 270 pF •• •• •• •• •• ••
331 330 pF •• •• •• •• •• ••
391 390 pF •• •• •• •• •• ••
471 470 pF •• •• •• •• •• ••
561 560 pF •• •• •• •• •• ••
681 680 pF •• •• •• •• •• ••
821 820 pF •• •• •• •• •• ••
102 1.0 nF •• •• •• •• •• ••
122 1.2 nF •• •• •• •• •• ••
152 1.5 nF •• •• •• •• •• ••
182 1.8 nF •• •• •• •• •• ••
222 2.2 nF •• •• •• •• •• ••
272 2.7 nF •• •• •• •• •• ••
332 3.3 nF •• •• •• •• •• ••
392 3.9 nF •• •• •• •• •• ••
472 4.7 nF •• •• •• •• •• ••
562 5.6 nF •• •• •• •• ••
682 6.8 nF •• •• •• •• ••
822 8.2 nF •• •• •• •• ••
103 10 nF •• •• •• •• ••
123 12 nF •• •• •• ••
153 15 nF •• •• •• ••
183 18 nF •• •• ••
223 22 nF •• •• ••
273 27 nF X5R •• X5R •• X5R ••
333 33 nF X5R •• X5R •• X5R ••
393 39 nF X5R ••
473 47 nF X5R ••
563 56 nF
683 68 nF
823 82 nF
104 100 nF
124 120 nF X5R •
154 150 nF X5R •
184 180 nF
224 220 nF
274 270 nF
334 330 nF
394 390 nF
474 470 nF
564 560 nF
684 680 nF
824 820 nF
105 1.0 μF
125 1.2 μF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 9Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC X7R
STYLE VJ1206 VJ1210
CASE CODE 1206 1210
VOLTAGE (VDC) 16 25 50 100 200 500 16 25 50 75 100 200 500
VOLTAGE CODE J X A B C E J X A K B C E
CAP. CODE CAP.
101 100 pF
121 120 pF
151 150 pF
181 180 pF
221 220 pF
271 270 pF
331 330 pF
391 390 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1.0 nF •••••••••••••
122 1.2 nF •••••••••••••
152 1.5 nF •••••••••••••
182 1.8 nF •••••••••••••
222 2.2 nF •••••••••••••
272 2.7 nF •••••••••••••
332 3.3 nF •••••••••••••
392 3.9 nF •••••••••••••
472 4.7 nF •••••••••••••
562 5.6 nF •••••••••••••
682 6.8 nF •••••••••••••
822 8.2 nF •••••••••••••
103 10 nF •••••••••••••
123 12 nF •••••••••••••
153 15 nF •••••••••••••
183 18 nF •••••••••••••
223 22 nF
273 27 nF
333 33 nF
393 39 nF
473 47 nF
563 56 nF
683 68 nF
823 82 nF
104 100 nF
124 120 nF
154 150 nF
184 180 nF
224 220 nF
274 270 nF
334 330 nF
394 390 nF
474 470 nF
564 560 nF
684 680 nF
824 820 nF
105 1.0 μF
125 1.2 μF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 10 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC X7R
STYLE VJ1808 VJ1812
CASE CODE 1808 1812
VOLTAGE (VDC) 25 50 100 200 500 630 1000 1500 2000 3000 25 50 75 100 200 250 500 630 1000 1500 2000 3000
VOLTAGE CODE X A B C E L G R F H X A K B C P E L G R F H
CAP. CODE CAP.
221 220 pF
271 270 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1.0 nF
122 1.2 nF
152 1.5 nF
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF
123 12 nF
153 15 nF
183 18 nF
223 22 nF
273 27 nF
333 33 nF
393 39 nF
473 47 nF
563 56 nF
683 68 nF
823 82 nF
104 100 nF
124 120 nF
154 150 nF
184 180 nF
224 220 nF
274 270 nF
334 330 nF
394 390 nF
474 470 nF
564 560 nF
684 680 nF
824 820 nF
105 1.0 μF
125 1.2 μF
155 1.5 μF
185 1.8 μF
225 2.2 μF
275 2.7 μF
335 3.3 μF
395 3.9 μF
475 4.7 μF
565 5.6 μF
685 6.8 μF
825 8.2 μF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 11 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC X7R
STYLE VJ1825 VJ2220
CASE CODE 1825 2220
VOLTAGE (VDC) 25 50 100 200 500 630 1000 25 50 100 200 500 630 1000 2000 3000
VOLTAGE CODE X A B C E L G X A B C E L G F H
CAP. CODE CAP.
221 220 pF
271 270 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1.0 nF
122 1.2 nF
152 1.5 nF
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF ••••••••••••••
123 12 nF ••••••••••••••
153 15 nF ••••••••••••••
183 18 nF ••••••••••••••
223 22 nF ••••••••••••••
273 27 nF ••••••••••••••
333 33 nF ••••••••••••••
393 39 nF ••••••••••••••
473 47 nF ••••••••••••••
563 56 nF ••••••••••••••
683 68 nF ••••••••••••••
823 82 nF ••••••••••••••
104 100 nF
124 120 nF
154 150 nF
184 180 nF
224 220 nF
274 270 nF
334 330 nF
394 390 nF
474 470 nF
564 560 nF
684 680 nF
824 820 nF
105 1.0 μF
125 1.2 μF
155 1.5 μF
185 1.8 μF
225 2.2 μF
275 2.7 μF
335 3.3 μF
395 3.9 μF
475 4.7 μF
565 5.6 μF
685 6.8 μF
825 8.2 μF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 12 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
RoHS-compliant
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC X7R
STYLE VJ2225 VJ3640
CASE CODE 2225 3640
VOLTAGE (VDC) 25 50 100 200 500 630 1000 1500 2000 25 50 100 200 500
VOLTAGE CODE X A B C E L G R F X A B C E
CAP. CODE CAP.
102 1.0 nF
122 1.2 nF
152 1.5 nF
182 1.8 nF
222 2.2 nF
272 2.7 nF
332 3.3 nF
392 3.9 nF
472 4.7 nF
562 5.6 nF
682 6.8 nF
822 8.2 nF
103 10 nF •••••••••
123 12 nF •••••••••
153 15 nF ••••••••••••••
183 18 nF ••••••••••••••
223 22 nF ••••••••••••••
273 27 nF ••••••••••••••
333 33 nF ••••••••••••••
393 39 nF ••••••••••••••
473 47 nF ••••••••••••••
563 56 nF ••••••• •••••
683 68 nF ••••••• •••••
823 82 nF ••••••• •••••
104 100 nF ••••••• ••••
124 120 nF ••••• ••••
154 150 nF ••••• ••••
184 180 nF ••••• ••••
224 220 nF ••••• ••••
274 270 nF ••••• ••••
334 330 nF ••••• ••••
394 390 nF •••• ••••
474 470 nF •••• ••••
564 560 nF •••• ••••
684 680 nF •••• ••••
824 820 nF •••• ••••
105 1.0 μF •••• ••••
125 1.2 μF •••• ••••
155 1.5 μF ••• ••••
185 1.8 μF ••• ••••
225 2.2 μF •• •••
275 2.7 μF •• •••
335 3.3 μF
395 3.9 μF
475 4.7 μF
565 5.6 μF
685 6.8 μF
825 8.2 μF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 13 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NON-MAGNETIC C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
- 75 - 50 - 25 0 50 100 125
2.0
1.5
1.0
0.5
0.0
- 0.5
- 1.0
- 1.5
- 2.0
NP0
TEMPERATURE °C
150 175
25 75
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT OF CAPACITANCE
TEMPERATURE °C
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 25 100 125
10 000
1000
100
10
INSULATION RESISTANCE (:F)
AGING RATE
HOURS
100 1000 10 000
% CAPACITANCE CHANGE
0.2
0.1
0.0
- 0.1
- 0.2
110
0 100 200 300 400 500 600 700 800 900 1000
10
0
- 20
- 30
VOLTAGE COEFFICIENT OF CAPACITANCE
DC VOLTS APPLIED
- 10
20
30
% CAPACITANCE CHANGE
CHANGE OF CAPACITANCE WITH FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
2
1
0
- 1
- 2
% CAPACITANCE CHANGE
DISSIPATION FACTOR VS. FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
0.00025
DISSIPATION FACTOR
0.0005
0.001
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 14 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS
100
50
TEMPERATURE °C
% RATED VOLTAGE
0
RATED VOLTAGE VS. TEMPERATURE
150
200
- 75 - 50 - 25 0 20 50 75 100 125 150 175
10 25 100
10 000
1000
100
10
INSULATION RESISTANCE (:F)
150
MIN. INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE °C
HOURS
1.0
0.0
- 1.0
- 2.0
% CAPACITANCE CHANGE
- 3.0
- 4.0
AGING RATE
1 10 100 1000 10 000
0.0
TEMPERATURE °C
% DISSIPATION FACTOR
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
DISSIPATION FACTOR VS. TEMPERATURE
- 75 - 50 - 25 0 25 50 75 100 125 150 175
X7R
0.020
0.016
0.012
0.008
0.004
DISSIPATION FACTOR VS. VOLTAGE
50 V
100 V
DISSIPATION FACTOR
0 10 20 30 40 50 60 70 80 90 100
DC VOLTS APPLIED
UN/V-
DISSIPATION FACTOR VS. VOLTAGE
0 100 200 300 400 500 600 700
UN/V-
0.020
0.016
0.012
0.008
0.004
500 V
200 V
DISSIPATION FACTOR
DC VOLTS APPLIED
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 15 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS
IMPEDANCE VS. FREQUENCY 500 V/630 V
FREQUENCY (MHz)
0.01 0.1 110 100
1000
100
10
1
0.1
0.01
IMPEDANCE (:)
1 µF 0.1 µF 0.01 µF
IMPEDANCE VS. FREQUENCY 2000 V
FREQUENCY (MHz)
IMPEDANCE (:)
0.1
1000
1 10 100 1000
100
10
1
4.7 nF 2.2 nF 1 nF
0 10 20 30 40 50 60 70 80 90 100
0
- 15
- 20
- 25
- 30
- 10
5
5
25 V
RATED 50 V
100 V
VOLTAGE COEFFICIENT OF CAPACITANCE
DC VOLTS APPLIED
% CAPACITANCE CHANGE
RATED
RATED
DC VOLTS APPLIED
% CAPACITANCE CHANGE
10
0
- 10
- 20
- 30
- 40
- 50
- 60
- 70
- 80
VOLTAGE COEFFICIENT OF CAPACITANCE
LOWER CAPACITANCE
0100 200 300 400 500 600 700
Case Size
1206
1210
1808
1812
Range
100 pF to 4700 pF
390 pF to 10 000 pF
470 pF to 18 000 pF
1000 pF to 27 000 pF
VJ Non-Magnetic Series for Reflow Soldering
www.vishay.com Vishay Vitramon
Revision: 15-Jan-2021 16 Document Number: 45227
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging code “T/R” and lower quantities can depend on product thickness
(5) Paper / plastic tape used by availability
STANDARD PACKAGING QUANTITIES (1)(2)(3)
CASE
CODE
TAPE
SIZE
7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES
PAPER TAPE
PACKAGING CODE
“C”
PLASTIC TAPE
PACKAGING CODE
“T”
LOW QUANTITY
PACKAGING CODE
“J” (5)
PAPER TAPE
PACKAGING CODE
“P”
PLASTIC TAPE
PACKAGING CODE
“R”
0402 8 mm 5000 n/a 1000 10 000 n/a
0603 (4) 8 mm n/a 4000 1000 n/a 10 000
0805 (4) 8 mm n/a 3000 1000 n/a 10 000
1206 (4) 8 mm n/a 3000 / 2500 1000 n/a 10 000 / 9000
1210 8 mm n/a 3000 / 2500 / 2000 1000 n/a 10 000 / 9000
1808 12 mm n/a 2000 500 n/a 10 000
1812 12 mm n/a 1000 500 n/a 4000
1825 12 mm n/a 1000 500 n/a 4000
2220 12 mm n/a 1000 500 n/a 4000
2225 12 mm n/a 500 250 n/a 4000
3640 16 mm n/a 500 n/a n/a n/a
STORAGE AND HANDLING CONDITIONS
(1) Store the components at +5 °C to +40 °C ambient temperature and 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
(3) For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt, or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight, and so on.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED