Model SS-10 Dip Rotary Selector Switch 10mm Square SPECIFICATIONS General Operating Temp. Range Storage Temp. Range Sealing Method Electrical Contact Rating Non-Switching Switching Contact Timing Contact Resistance Insulation Resistance Dielectric Strength Features z Sealed to Allow for Automatic Processing z Rotary Action for Easy Setting and Stability z Contact Action Self Cleaning Mechanical Shaft Torque Number Of Positions Step Angle Part Number SS-10- 1 6 N P -L -A Model No. of Poles 1 = 1 Pole 2 = 2 Poles No. 3= 4= 5= 6= of Contacts (Throws) 3 Contacts (2 Pole only) 4 Contacts (1 Pole only) 5 Contacts (1 Pole only) 6 Contacts (1 Pole only) Contact Timing N = Non-Shorting S = Shorting (1 Pole 5, 1 Pole 6 without off) Adjustment P = Top S = Side Shaft Type L = Knob None = Flush A = without off Blank = with off (1 Pole, 6 Contact only) Marking Units Marked With Two Digit Date Code, Full Part Number and Switch Position Marks Packaging Bulk Pack 58 Rotational Life Stop Strength Environmental Thermal Shock: (-10C to +60C, 30 min. Dwell, 5 cycles) Humidity: (90 95% RH, 40C, 240 Hrs.) Low Temp. Storage: (-25C, 1 Hr.) High Temp. Storage: (60C, 96 Hrs.) Soldering Heat: (260C, 10 Sec) Mechanical Shock: (50 g, 11 mS, Sawtooth, 6 Axes, 3 Cyles) Vibration: (10 g, .060 DA, 10 to 200 Hz., 2 Hrs. 3 Axes) : -10C TO +60C : -25C TO +70C : O Ring Sealed : 100 mA @ 50 VDC max. : 100 mA @ 5 VDC max. : Non Shorting : 100 mV max. @ 1KHz, 20 mV : 100 MV min. @ 100 Vdc : 1 mA max. 300 VAC @ 50 Hz For 60 Sec. : 400 g-cm (5.56 oz-in) max. : 4, 6 or 3 : 36 (3 or 4 Position), 22.5 (6 Position) 30 (5 Position), 28 (6 Position no off) : 500 Cycles min. : 500 g-cm (6.94 oz-in) min. See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below Contact Bounce 0.1 mS Max. Contact Bounce 0.1 mS Max. Criteria Note: Contact Resistance Not Greater Than 100 m V Insulation Resistance Not Less Than 100 MV (10 MV Humidity) Shaft Torque Not Greater Than 400 g-cm No Mechanical Damage SS-10 Dip-Type Selector Switch SS-10-16NP Top Adjust Schematic SS-10-23NP Top Adjust Schematic 59 SS-10 Dip-Type Selector Switch S-2050 (SS-10-14NP) Top Adjust Schematic SS-10-16NP-L Top Adjust With Knob Schematic 60 SS-10 Dip-Type Selector Switch S-2151 (SS-10-14NSL) Side Adjust with knob Schematic S-2150 (SS-10-14NPL) Top Adjustment with knob Schematic 61 SS-10 Dip-Type Selector Switch SS-10-15SP Top Adjustment Schematic SS-10-15SP-L Top Adjust, With Knob Schematic 62 SS-10 Dip-Type Selector Switch SS-10-16SP-A Top Adjustment Schematic SS-10-16SP-LA Top Adjust, with knob Schematic 63 SS-10 Dip-Type Selector Switch SS-10-23NP-L Top Adjust With Knob Schematic S-2051 (SS-10-14NS) Side Adjust Schematic 64