ALUMINUM ELECTROLYTIC CAPACITORS UG Chip Type, Higher Capacitance Range series Chip Type , higher capacitance in larger case sizes (12.5, 16, 18, 20) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape and tray. Compliant to the RoHS directive (2002/95/EC). UJ High Temperature UG Specifications Item Performance Characteristics - 40 to +85C 6.3 to 450V 4.7 to 10000F 20% at 120Hz, 20C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Rated voltage (V) Leakage Current 6.3 to 100 160 to 450 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. -- I = 0.04CV+100 ( A) max. (1 minute's) Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 to 250 400 * 450 0.25 0.20 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency: 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 6.3 5 12 63 2 3 50 2 3 35 2 4 25 2 5 16 3 8 10 4 10 Capacitance change tan Leakage current 100 2 3 160 to 250 400 * 450 3 6 6 10 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Type numbering system (Example : 50V 330F) Chip Type Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A 0.2 U U G 1 H 3 3 1 M NQ 1 M S Package code Taping MS Tray ZD E A 0.2 Pressure relief vent Series B 0.2 D 0.5 330 F UG 50V H0515 nichicon C 0.2 0.3 MAX. 0.5 MAX. Plastic platform Voltage Lot No. Trade mark Capacitance Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value L 1.0 H Negative Size code Configuration Capacitance Tolerance (20%) D Rated capacitance (330F) 12.5 to 18 20 Rated voltage (50V) Code NQ RQ Series name (mm) D 12.5x13.5 12.5x16. 12.5x21. 16x16.5. 16x21.5. 18x16.5. 18x21.5. 20x16.5. 20x21.5. 4.8 4.8 4.8 5.4 5.4 6.4 6.4 6.2 6.2 A 13.6 13.6 13.6 17.1 17.1 19.1 19.1 21.1 21.1 B 13.6 13.6 13.6 17.1 17.1 19.1 19.1 21.1 21.1 C 4.0 4.0 4.0 6.3 6.3 6.3 6.3 8.8 8.8 E 13.5 16.0 21.0 16.5 21.5 16.5 21.5 16.5 21.5 L H 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.3 to 1.7 1.3 to 1.7 Type Dimension table in next page. CAT.8100Y ALUMINUM ELECTROLYTIC CAPACITORS UG series Dimensions V (F) Code Cap. 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 220 221 12.5 x 13.5 450 330 331 12.5 x 13.5 520 470 471 1000 102 2200 222 12.5 x 16.0 890 3300 332 16 x 16.5 1200 4700 472 16 x 16.5 6800 682 18 x 16.5 10000 103 18 x 21.5 12.5 x 13.5 V (F) Cap. Code 4.7 12.5 x 13.5 550 12.5 x 13.5 580 16 x 16.5 740 12.5 x 16.0 820 16 x 16.5 1000 18 x 21.5 1150 18 x 21.5 1550 620 12.5 x 13.5 710 12.5 x 16.0 960 16 x 16.5 1150 18 x 16.5 1350 16 x 16.5 1300 18 x 16.5 1450 18 x 21.5 1700 1400 18 x 16.5 1500 18 x 21.5 1750 1650 18 x 21.5 1850 2000 20 x 21.5 2200 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G 4R7 450 2W 12.5 x 13.5 115 12.5 x 13.5 115 12.5 x 13.5 150 16 x 16.5 140 16 x 16.5 140 235 12.5 x 16.0 240 18 x 16.5 280 16 x 21.5 275 12.5 x 16.0 310 16 x 16.5 340 18 x 21.5 350 18 x 21.5 345 20 x 21.5 430 Case size D x L (mm) Rated ripple 10 100 22 220 12.5 x 13.5 33 330 47 470 12.5 x 16.0 370 16 x 16.5 415 18 x 16.5 415 18 x 21.5 490 68 680 12.5 x 13.5 350 16 x 16.5 500 18 x 16.5 505 100 101 12.5 x 13.5 370 12.5 x 16.0 440 18 x 16.5 590 18 x 21.5 590 220 221 12.5 x 16.0 580 18 x 16.5 665 330 331 16 x 16.5 680 18 x 21.5 825 470 471 18 x 16.5 850 Size 12.5x21 is available for capacitors marked," ". Size 16x21.5L is available for capacitors marked," ". Size 20x16.5L is available for capacitors marks," ". Rated ripple current (mArms) at 85C 120Hz In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(F) Frequency Less than 68 100 to 4700 1000 to 10000 4.7 to 100 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.75 0.80 0.85 0.80 1.00 1.00 1.00 1.00 1.35 1.23 1.10 1.25 1.57 1.34 1.13 1.40 2.00 1.50 1.15 1.60 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100Y