FTR-K1 SERIES POWER RELAY 1 POLE - 16A LOW PROFILE TYPE RoHS compliant FTR-K1 Series n FEATURES l l l l l l l Low profile (height: 15.7mm) HIGH ISOLATION5 Insulation Distance (between coil and contacts: 10mm min.) Dielectric strength: 5KV Surge strength: 10KV Class F coil UL, Flammability 94V-0 Cadmium free contacts SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved RoHS Compliant since production n ORDERING INFORMATION [Example] FTR-K1 (a) C (b) K (c) 005 (d) W (e) - ** (f ) (a) Series Name FTR-K1 : FTR-K1 Series (b) Contact Arrangement A C : 1 form A (SPST-NO) : 1 form C (SPDT) (standard type "K" only) (c) Coil Type / Enclosure K L : Standard (400 mW) / Flux free (16 A, 12A contacts only) : High Sensitive (250 mW)/ Flux free (10A, contacts only) (d) Nominal Voltage 005 018 024 : 5 VDC, 006 : 6VDC, : 18 VDC (standard type only) : 24VDC, 048 : 48VDC (e) Contact Material / TV type W T : AgSnO2 : AgSnO2 / TV-5 rated (1form A 16A type only) (f) Contact rated / Terminal pitch/ Temperature range Nil -MA -LA -LB :16A/5.0mm/-40 to +85C (standard type "K" only) : 12A/3.5mm/-40 to +85C (standard type "K" only) :10A/3.5mm/-40 to +85C (high sensitive "L" only) :10A/5.0mm/-40 to +105C (high sensitive type "L" only) 009 : 9VDC 012 : 12VDC 022 :022VDC (standard type only), Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W FTR-K1 SERIES n SAFETY STANDARD AND FILE NUMBERS UL508, 873 (File No. E63614) C22.2 No.1and No. 14 (File No. LR40304) VDE 0435, 0631, 0700, 0860 SEMKO EN 610558-I, 61095 Type Nominal Voltage Contact Rating FTR-K1 16A type 5 to 48 VDC 1/2 HP 125VAC/ 1HP 277VAC 16A 277VAC/24VDC resistive Pilot duty B300 FTR-K1 10A type 5 to 48 VDC 1/3 HP 125VAC/ 1/2HP 277VAC 10A 277VAC/24VDC resistive Pilot duty B300 5 to 48 VDC TV-5 120VAC 1/2 HP 125VAC/ 1HP 277VAC 16A 277VAC/24VDC resistive Pilot duty A300 FTR-K1 TV-5 FTR-K1 SERIES n SPECIFICATIONS FTR-K1CK ( ) W (Standard) It em Contact Coil Time Value Insulation 1 form C Material Silver alloy Resistance (initial) Maximum 100m (at 1A 6VDC) Rating 16A, 250VAC/24VDC 10A 250VAC Maximum Carrying Current 16A 10A Maximum Switching Rating 4,000VA / 384W 2,500VAC Maximum Switching Voltage 440VAC / 300VDC 440 VAC Minimum Switching Load*1 10mA 5VDC Maximum Switching Current 16A Minimum Inrush Current --- Power 400 mW 250 mW Operating Temperature -40 C to +85 C (no frost) -40 C to +105 C (no frost) Operate Time (without diode) Maximum 15ms (at nominal voltage, no bounce) Release Time (without diode) Maximum 5ms (at nominal voltage, no bounce) Resistance (at 500VDC) Minimum 1,000 Mohms Between open contacts 1 form A 10A 120VAC 78A(TV5) 1,000 VAC 1 minute Surge Strength 10,000V (at 1.2 x 50 micro sec.) Mechanical 20 x 106 operations minimum Electrical --- Between coil and 5,000 VAC 1 minute contacts AC contact rating Other FTR-K1AL ( ) W-LB (High sensitive) Arrangement Dielectric Strength Life FTR-K1AK ( ) T (Standard) 50 x 103 ops. minimum 100 x 103 ops. minimum 150 x 103 ops. min. (at 105 degrees) DC contact rating 30 x 103 ops. min. 100 x 103 ops. min. --- Lamp load (TV-5) --- 25 x 103 ops. min. --- Vibration Resistance Misoperation 10 to 500 Hz, 5gn (double amplitude of 0.35mm) 10 to 55 Hz at double amplitude of 0.7mm Endurance 10-55 Hz, (double amplitude of 1.5mm) Shock Resistance Misoperation Min. 100m/s2 (111ms) Endurance Min. 1,000m/s2 (61ms) Weight Approximately 13g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-K1 SERIES n SPECIFICATIONS FTR-K1CK ( ) W-MA FTR-K1AK ( ) W-MA FTR-K1AL ( ) W-LA (Standard) (Standard) (High sensitive) It em Contact Arrangement 1 form C Material Silver alloy Resistance (initial) Maximum 100m (at 1A 6VDC) Rating 12A, 250VAC/24VDC 10A 250VAC Maximum Carrying Current 14A 10A Maximum Switching Rating 3,000VA / 288W 2,500VAC Maximum Switching Voltage 440VAC / 300VDC 440 VAC Minimum Switching Load* 10mA 5VDC Maximum Switching Current 12A Minimum Inrush Current --- Coil Operating Temperature -40 C to +85 C (no frost) Time Value Operate Time (without diode) Maximum 15ms (at nominal voltage, no bounce) Release Time (without diode) Maximum 5ms (at nominal voltage, no bounce) Resistance (at 500VDC) Minimum 1,000 Mohms 1 Insulation Dielectric Strength Life Between open contacts 10A --- --- 1,000 VAC 1 minute Between coil and 5,000 VAC 1 minute contacts Surge Strength 10,000V (at 1.2 x 50 micro sec.) Mechanical 20 x 106 operations minimum Electrical AC contact rating 100 x 103 ops. minimum 100 x 103 ops. min. DC contact rating 100 x 103 ops. min. --- Lamp load (TV-5) --Other 1 form A --- --- Vibration Resistance Misoperation 10 to 500 Hz, 5gn (double amplitude of 0.35mm) 10 to 55 Hz at double amplitude of 0.7mm Endurance 10-55 Hz, (double amplitude of 1.5mm) Shock Resistance Misoperation Min. 100m/s2 (111ms) Endurance Min. 1,000m/s2 (61ms) Weight Approximately 13g FTR-K1 SERIES n COIL DATA CHART Standard type (type K) Mo d el St an d ar d TV- FTR-K1CK005W FTR-K1CK006W FTR-K1CK009W FTR-K1CK012W FTR-K1CK018W FTR-K1CK022W FTR-K1CK024W FTR-K1CK028W FTR-K1CK048W FTR-K1AK005T FTR-K1AK006T FTR-K1AK009T FTR-K1AK012T FTR-K1AK018T FTR-K1AK022T FTR-K1AK024T FTR-K1AK028T FTR-K1AK048T No m i n al Vo l t ag e 5VD C 6VDC 9VDC 12VDC 18 VDC 22VDC 24VDC 28VDC 48VDC Co i l Res i s t an c e Mu s t Op er at e Mu s t Rel eas e Vo l t ag e Vo l t ag e ( 10%) 62 90 20 2 360 81 0 1,210 1,440 1,960 5,360 3.5VDC 4.2VDC 6.3VDC 8.4VDC 12.6 VDC 15.4VDC 16.8VDC 19.6VDC 33.6VDC 0.5VDC 0.6VDC 0.9VDC 1.2VDC 1.8 VDC 2.2VDC 2.4VDC 2.8VDC 4.8VDC No m i n al Po w er 400mW 400mW 400mW 400mW 400mW 400mW 400mW 400mW 430mW High sensitive type (type L) Mo d el Hi g h s en s i t i v e t y p e (t y p e L ) FTR-K1AL005W-LB FTR-K1AL006W-LB FTR-K1AL009W-LB FTR-K1AL012W-LB No m i n al Vo l t ag e Co i l Res i s t an c e Mu s t Op er at e Mu s t Rel eas e ( 10%) Vo l t ag e Vo l t ag e No m i n al Po w er 5VDC 6VDC 9VDC 12VDC 100 145 325 575 3.75VDC 4.5VDC 6.75VDC 9VDC 0.5VDC 0.6VDC 0.9VDC 1.2VDC 250mW 250mW 250mW 250mW FTR-K1AL018W-LB 18VDC 1,300 13.5VDC 1.8VDC 250mW FTR-K1AL024W-LB 24VDC 2,310 18VDC 2.4VDC 250mW FTR-K1AL048W-LB 48VDC 9,216 36VDC 4.8VDC 250mW Note: All values in the table are measured at 20C. FTR-K1 SERIES Soldering 0.5 0.45 0.5 3.3 15.7 +0.3 n DIMENSIONS FTR-K1CK ( ) W / FTR-K1AK ( ) T / FTR-K1AL ( ) W-LB (2.6) 0.3 5 (2.6) 0.9 5 0.9 7.5 12.7 +0.3 20 0.25 29 +0.3 l Schematics (BOTTOM VIEW) 5 6 7 8 4 3 2 1 7.5 l PC Board mounting hole layout (BOTTOM VIEW) 2- O1 0.1 6- O1.3 -0 5 5 20 Orientation Marking Unit: mm Note: In case of 1 form A, there is no "Stationay contact arm (NC)" ( ). FTR-K1 SERIES n DIMENSIONS 15.7+0.3 FTR-K1CK ( ) W-MA / FTR-K1AK ( ) W-MA / FTR-K1AL ( ) W-LA Soldering 0.5 0.45 0.9 3.3 0.5 0.3 7.5 12.7+0.3 3.5 3.5 (2.6) (2.6) 0.9 200.25 29+0.3 5 4 7.5 3 2-O10.1 3.5 3.5 2 20 1 Orientation marking Unit: mm Note: In case of 1 form A, there is no "Stationay contact arm (NC)" ( ). FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 11/17/2005.