(1/2) EMC Filters for AC Power Line Inlet-socket Type ZUG-11, ZUG-11A Series FEATURES * These IEC-type inlet sockets incorporate small, highperformance EMC filters with outstanding attenuation characteristics for both common mode and differential mode noise components. * Leakage current is maintained at less than 0.5mA * Two types of connection terminals are offered: Faston(R) #250 (ZUG-11 series, t: 0.8mm) or lug terminal (ZUG-11A series). * Effcient manufacturing makes these filters highly cost -effective. * It is a product conforming to RoHS directive. Conformity to RoHS Directive SAFETY STANDARDS Standard and standard No. U.S.A. Canada Part No. UL UL1283 E62388 E62388 E62388 E62388 E62388 E62388 ZUG2203-11 ZUG2203-11A ZUG2206-11 ZUG2206-11A ZUG2210-11 ZUG2210-11A CSA CSA C22.2 No.8 LR76849C LR76849C LR76849C LR76849C LR76849C LR76849C Europe NEMKO EN60939 P08208996 P08208996 P08208996 P08208996 P08208996 P08208996 APPLICATIONS Personal computers, computer terminals, office automation equipment, digital applied devices (ECRs, electronic calculators, electronic scales, etc.), measurement devices, medical equipment, and any other devices that require a miniaturized high-performance filter. Faston (R) o3.3 5.2 25 38.1 o3.3 55.3 25 Ground terminal 48 30.5 Ground terminal 40 ZUG-11A 48 40 30.5 SHAPES AND DIMENSIONS ZUG-11 Lug terminal 5.2 38.1 53.3 *Case: metal, input terminal: inlet socket (EN60320) output terminal: Faston (R) #250 (-11 series, t: 0.8mm), lug terminal (-11A series) Typical dimensions for installation From back side panel From front panel o3.6 o3.6 or M3 tap 23.2 40 30 40 R3.5 31.2 R5.5 21.5 *Tighten the panel mounting M3 dia. bolt with the torque under 5.88x10 -1 N * m. Dimensions in mm * Faston(R) is a registered trademark of Tyco Electronics AMP Corp. Incorporated. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 004-01 / 20080818 / e916_zug_11.fm (2/2) ELECTRICAL CHARACTERISTICS Part No. Rated voltage Eac(V) Rated current(A) Test voltage Eac(V)[Between terminal and case] Insulation resistance(M) [DC. 500V, 1min/between terminal and case] Leakage current(mA)[250V * 60Hz] DC resistance(m) Operating temperature range(C)[Including self-temperature rise] With derating over(C) Temperature rise(C) Differential mode at 30dB Attenuation frequency range (MHz)[+5 to +35C] Common mode at 30dB Weight(g) TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS ZUG2203-11/-11A ZUG2203-11, 2203-11A 250 3 1500 ZUG2206-11, 2206-11A 250 6 1500 ZUG2210-11, 2210-11A 250 10 1500 100min. 100min. 100min. 0.5max. 150max. -25 to +85 55 30max. 3 to 30 3 to 30 46 0.5max. 100max. -25 to +85 55 30max. 5 to 30 5 to 30 46 0.5max. 30max. -25 to +85 55 30max. 8 to 30 10 to 30 46 ZUG2206-11/-11A 80 80 Attenuation (dB) 100 Attenuation (dB) 100 60 40 Common mode 20 0 0.3 1 3 10 Frequency (MHz) Differential mode 40 Common mode 20 Differential mode 0.1 60 30 100 300 ZUG2210-11/-11A 0 0.1 0.3 1 3 10 Frequency (MHz) 30 100 300 CIRCUIT DIAGRAM 100 4 1 Attenuation (dB) 80 60 2 40 Differential mode 20 0 3 Case GND Common mode 0.1 0.3 1 3 10 Frequency (MHz) 30 100 300 * All specifications are subject to change without notice. 004-01 / 20080818 / e916_zug_11.fm