Cat.No.C31E-20
On-Board Type (DC)
EMI Suppression Filters
(EMIFILr)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
for EU RoHS Compliant
• All the products in this catalog comply with EU RoHS.
• EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
• For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Recycled Paper
CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EMIFILr, EMIGUARDr, "EMIFIL" and "EMIGUARD" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
1
2
3
4
5
1
2
3
4
5
6
6
2
4
7
13
64
67
69
81
85
21
32
34
50
55
92
108
112
114
121
95
99
100
103
106
123
133
137
124
128
131
140
141
159
167
145
149
169
173
177
191
195
203
208
212
170
Selection Guide of EMI Filters
Product Guide / Effective Frequency Range
Outlines of EMI Suppression Filters (EMIFILr) for DC Line
!Caution / Notice
Soldering and Mounting
Packaging
Chip EMI Suppression Filter Design Kits
Outlines of Major Noise Regulation Standards
Principles of Noise Suppression by DC EMIFILr
Murata EMI Filter Selection Simulator
Chip Ferrite Beads Part Numbering / Impedance Map / BLM Series Line Up
Chip EMIFILr Part Numbering
Chip Common Mode Choke Coils Part Numbering
Block Type EMIFILr
Lead Type EMI Suppression Filters (EMIFILr)
Microwave Absorbers Part Numbering
oBLM02A/03A/15A/18A/21A
oBLM18T
oBLM03B/15B/18B/21B
oBLM18R/21R
oBLM03P/15P/18P/21P/31P/41P
oCapacitor Type NFM18C/21C/3DC/41C
oCapacitor Array Type NFA31C
o
LC Combined Monolithic Type NFL18ST/18SP/21S
oLC Combined Array Type NFA18S/21S
o
LC Combined Wire Wound Type NFW31S
oFilm Type DLP0NS/11S/31S
oFilm Type Array DLP2AD/31D
oMonolithic Type DLM11G/2HG
oSMD Type BNX022/023
oLead Type BNX00p/01p
Ferrite Beads Inductors Part Numbering
oBL01/02/03
Disc Type EMIFILr Part Numbering
o
DSp6/Wide frequency DSp9N/Heavy-duty Type DSp9H
oBLM18K
oBLM18S
o
For GHz Band Noise Suppression BLM15H/15E/18H/18E
o
For High-GHz Band Noise Suppression BLM15G/18G
oArray Type BLA2AA/2AB/31A/31B
oRC Combined Type NFR21G
oRC Combined Array Type NFA31G
o
For Large Current NFM18P/21P/3DP/31P/41P/55P
o
LC Combined Type for Large Current NFE31P/61P
oWire Wound Type DLW21S/21H/31S
o
Wire Wound Type for Large Current DLW5AH/5BS/5BT
EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
oVFR3V/VFS6V/VFS9V
Common Mode Choke Coils Part Numbering
oPLT09H
oEA10/20/21/22/30
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Selection Guide of EMI Filters
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0201
BLM03B
10–240Ω
Impedance is typical value at 100MHz.
Start
DC Power Line General Signal Line High Speed Signal Line
Type Signal Line
0402
BLM15B
5–1800Ω
01005
BLM02A
10–120Ω
0201
BLM03A
10–1000Ω
Chip Ferrite Beads
0402
BLM15P
1–2.2A 10–120Ω
0201
BLM03P
0.75–0.9A 22–33Ω
0402
BLM15EG
0.7–1.5A 120–220Ω
0402
BLM15HG/EG
120–1000Ω
0402
BLM15HD/HB
120–1800Ω
0402
BLM15GG
220–470Ω
0603
BLM18HD/HB/HE
120–1800Ω
0603
BLM18B
5–2500Ω
0805
BLM21B
5–2700Ω
0804
BLA2AB
10–1000Ω
1206
BLA31B
120–1000Ω
Arrays
0603
BLM18HG/HK/EG
100–1000Ω
0402
BLM15A
10–1000Ω
0603
BLM18A/T/R
120–1000Ω
0805
BLM21A/R
120–1000Ω
0804
BLA2AA
120–1000Ω
1206
BLA31A
30–1000Ω
Arrays
Low DC Resistance Type
0603
BLM18HE/EG
0.5–2A 100–1500Ω
0603
BLM18P
0.5–3A 30–470Ω
0805
BLM21P
1.5–6A 22–330Ω
1206
BLM31P
1.5–6A 33–600Ω
1806
BLM41P
1–6A 60–1000Ω
0603
BLM18K
1.3–6A 26–600Ω
Dimensions in inches
0603
BLM18GG
470Ω
0603
BLM18S
1.5–6A 26–330Ω
for GHz Band Noise
for High-GHz Band Noise
Generalfor GHz Band Noise
for High-GHz Band Noise
Generalfor GHz Band NoiseGeneral
0402
BLM15GA
75Ω
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Selection Guide of EMI Filters
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0504
DLM11G
600Ω
1008
DLM2HG
600Ω
0504
DLP11S
67–330Ω
0805
DLW21S
67–370Ω
0805
DLW21H
67–180Ω
1206
DLP31S
120–550Ω
2020/2014
DLW5BS(AH)
0.2–5A 190–4000Ω
1206
DLW31S
90–2200Ω
0804
DLP2AD
67–280Ω
1206
DLP31D
90–440Ω
0603
NFM18C
22–22000pF
0805
NFM21C
22–22000pF
1205
NFM3DC
22–22000pF
1806
NFM41C
22–22000pF
0603
NFM18P
2–4A 0.1–2.2µF
0805
NFM21P
2–6A 0.1–4.7µF
1806
NFM41P
2–6A 0.2–1.5µF
1205
NFM3DP
2A 0.022µF
1206
NFM31P
6A 27µF
1206
NFA31C
22–22000pF
1206
NFE31P
22–2200pF
2706
NFE61P
33–4700pF
2220
NFM55P
6A 1.5µF
1206
NFE31P
6A 22–2200pF
2706
NFE61P
2A 33–4700pF
0603
NFL18SP
150–500MHz
0805
NFL21S
10–500MHz
1206
NFW31S
10–500MHz
0805
NFR21G
22–100Ω 10–100pF
1206
NFA31G
6.8–100Ω 10–100pF
0603
NFL18ST
200–500MHz
2020
DLW5BT
1.5–6A 100–1400Ω
03025
DLP0NS
67–120Ω
0603
NFA18S
130–480MHz
0805
NFA21S
50–330MHz
Arrays
RC Combined Type
RC Combined Array Type
LC Combined T-type
LC Combined π-type
Capacitor Type
Capacitor Array Type
LC Combined T-type
Capacitor Type
LC Combined T-type
BNX022/023
10–15A
Block Type
LC Combined Array Type
Impedance is typical value at 100MHz.
Dimensions in inches
Start
DC Power Line
High Speed Differential
Transmission Line
Audio Line
Type Signal Line
Start
DC Power Line General Signal Line High Speed
Signal Line
Type Signal Line
Chip EMIFILrChip Common Mode Choke Coils
Dimensions in inches
3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Product Guide/Effective Frequency Range
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18R
BLM21R
BLM03A
BLM18A
BLM21A
BLM15B
BLM18B
BLM21B
BLM18P
BLM21P
BLM31P
BLM41P
0603
0805
0201
0603
0805
1206
0402
0603
0805
1206
0603
0805
1206
1806
1.6 0.8
2.0 1.25
3.2 1.6
1.6 0.8
2.0 1.25
1.6 0.8
2.0 1.25
3.2 1.6
1.6 0.8
2.0 1.25
2.0 1.0
3.2 1.6
4.5 1.6
BLM15A 0402
1.0 0.5
1.0 0.5
1.0 0.5
0804
2.0 1.0 0804
0.6 0.3
0201
0.6 0.3
BLM02A 01005
0.4 0.2
BLM03B
BLM18K 0603
1.6 0.8
BLM15P 0402
Product Guide
Type
For Digital
Interfaces
Standard
For High
Speed Signals
For High
Current
Inductor
Type
BLA31B
(4 circuits array)
BLM18S
(Low DC Resistance Type)
BLA31A
(4 circuits array)
Series Dimensions
(mm) EIA Code
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Effective Frequency Range
Continued on the following page.
BLA2AB
(4 circuits array)
BLA2AA
(4 circuits array)
BLM18T 0603
1.6 0.8
0201
0.6 0.3
BLM03P
0603
1.6 0.8
4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Product Guide/Effective Frequency Range
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM21C
NFM3DC
NFM41C
NFL21S
NFR21G
NFW31S
NFM21P
NFM18P
NFM3DP
NFM41P
NFM31P
NFE31P
NFE61P
NFA31G
(4 circuits array)
NFA31C
(4 circuits array)
0805
1205
1806
1206
0805
0805
1206
1206
0805
1205
1806
1206
2706
1.25
3.2
4.5 1.6
1.25
2.0
1.25
2.0
1.25
2.0
4.5 1.6
3.2 1.6
1206
3.2 1.6
3.2 1.6
NFA21S
(4 circuits array) 0805
NFA18S
(4 circuits array) 0603
3.2 1.6
6.8 1.6
1.25
2.0
1.25
2.0
3.2 1.25
0603
1.6 0.8
NFM18C 0603
1.6 0.8
NFL18ST 0603
1.6 0.8
NFL18SP 0603
1.6 0.8
1.6 0.8
1.6
3.2
Type
Standard
Type
For Signal
Lines
For High
Current
T Filter for
High Current
Capacitor
Type
for
High-GHz
Band Noise
Suppression
Series Dimensions
(mm) EIA Code
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Effective Frequency Range
Continued from the preceding page.
Continued on the following page.
5.7
5.0
NFM55P 2220
Inductor
Type
BLM18HG
BLM18HD
BLM18EG
0603
0603
0603
1.6 0.8
BLM18HB 0603
1.6 0.8
1.6 0.8
1.0 0.5
1.0 0.5
1.0 0.5
1.6 0.8
BLM18GG 0603
1.6 0.8
BLM18HK 0603
1.6 0.8
BLM15EG 0402
BLM15HD 0402
BLM15HG 0402
BLM18HE 0603
1.6 0.8
1.0 0.5
BLM15GG 0402
1.0 0.5
BLM15GA 0402
1.0 0.5
BLM15HB 0402
For GHz
Band
Noise
Suppression
5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Product Guide/Effective Frequency Range
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type
Disc EMIFILr
EMIGUARDr
(EMI Filters with varistor functions)
Block EMIFILr
Common Mode Choke Coils
Microwave Absorbers
VFR3V
VFS6V/9V
PLT09H
EA10/20/21/22/30
Series Dimensions
(mm) EIA Code
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Effective Frequency Range
Continued from the preceding page.
BL01/02/03
DSN6/9(H)
DSS6/9(H)
DST9(H)
BNX022/023
BNX002/003/005
BNX012/016
DLP31D
DLP31S
DLM2HG
DLW21S
DLW31S
DLW5BT
DLW5BS
(DLW5AH)
1206
1206
1008
0805
1206
2020
(2014)
2.0 1.2
2.0 1.2
3.2 1.6
3.2 1.6
DLM11G 0504
3.2 1.6
5.0 5.0
(3.6)
2020
5.0
5.0
DLP11S 0504
DLW21H 0805
2.5 2.0
1.251.0
1.251.0
Common Mode
Choke Coils
2.0 1.0
DLP2AD 0804
DLP0NS 03025
0.850.65
6
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outline of EMI Suppression Filters (EMIFILr) for DC Line
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Ferrite Bead .............p.21–91 ..........p.146–148Ferrite Bead Inductor
Equivalent Circuit
Impedance - Frequency Characteristics (typical)
oChip Ferrite Bead
oFerrite Bead Inductor
" Chip Ferrite Beads are effective for frequencies ranging
from a few MHz to a few GHz. Chip Ferrite Beads are
widely used as a low noise countermeasure, as well as a
universal noise suppression component.
"Chip Ferrite Beads produce a micro inductance in the low
frequency range. At high frequencies, however, the
resistive component of the inductor produces the primary
impedance. When inserted in series in the noise
producing circuit, the resistive impedance of the inductor
prevents noise propagation.
0
200
400
600
800
1000
1 10 100 1000
Impedance (Ω)
Frequency (MHz)
R: Real Part (Resistive Portion) X: Imaginary Part (Inductive Portion)
X
R
Z
R(f)
BLM03BLM02
BLA31BLM31 BLM41
BLM18
BLM21
BLM15 BLA2A BL01 BL02RN1
BL02RN2 BL03RN2
7
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outline of EMI Suppression Filters (EMIFILr) for DC Line
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip EMIFILr...............p.95–99
p.103–105
p.114–120
Disk Type EMIFILr...........p.150–158
..........p.121–122
NFE31P NFE61P/H
NFM21P NFM31PNFM21C
NFM3DC
DS-6 DS-9 DS-9H
T-type Chip EMIFILr
oChip EMIFILr
oT-type Chip EMIFILr
oDisk Type EMIFILr
NFA31C NFA18S
" This capacitor type EMI suppression filter has a large
noise suppression effect at frequencies ranging from a
few MHz to hundreds of MHz. This type of filter is used
widely as a universal, high performance EMI suppression
component.
" The chip EMIFILr incorporates a built-in three terminal
capacitor, eliminating the lead wire and thereby
increasing the high frequency performance characteristic.
" The T-type chip EMIFILr is a chip EMI suppression filter
with a built-in feed-thru capacitor. The use of ferrite
beads on input and output terminals minimizes
resonance with surrounding circuits.
" Whatever the situation, three terminal construction
reduces residual inductance, thereby substantially
improving noise suppression at frequencies over 10MHz.
A three terminal capacitor has a higher self resonance frequency
than a general two terminal type and exhibits effective noise
suppression at high frequency.
Comparison of Insertion Loss Characteristics
80
60
40
20
0
1 5 10
C=2200pF
50 100 500 1000
Insertion Loss (dB)
Frequency (MHz)
Two Terminal
Capacitor
Three Terminal Capacitor
(DSN9HB32E222Q55)
Ideal
Characteristics of
Capacitor
Three Terminal Capacitor
(Built-in Bead)
(DSS9HB32E222Q55)
NFM18P
NFA21S
8
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outline of EMI Suppression Filters (EMIFILr) for DC Line
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip EMIFILr for Signal Line ........p.34–49
p.69–71
p.74–78
p.100–102
p.106–107
......p.108–113
Chip EMIFILr with Waveform
Distortion Suppressing Function
Comparison of Insertion Loss Characteristics
oChip EMIFILr for Signal Line
oChip EMIFILr with Waveform Distortion Suppressing Function
" High-speed signal application EMIFILr are high
performance EMI suppression filters which increase the
slope of insertion loss frequency characteristic curves
(shape factor), thereby improving noise and signal
separation. These are used for high speed signal
applications in which noise and signal frequency
approach the same value.
To avoid the elimination of both the noise and specific
signal components, three terminal capacitors and other
components are applied.
An NFW31S with a built-in capacitor and an inductor type
BLM--B are available.
BLM--HB/HD has additional performance for
suppressing GHz range noise after cut-off frequency.
" The EMIFILr with waveform distortion suppressing
function suppresses waveform distortion caused by the
resonance of digital ICs and surrounding circuits.
80
60
40
20
0
1 5 10 50 100
NFW31S
500 10002000
Insertion Loss (dB)
Frequency (MHz)
Conventional Type
NFR21G NFA31G
NFL21S
BLM18B/HB/HD/HE
NFW31S NFL18ST NFL18SP
BLM21BBLM15B/HB/HD
BLM03B
9
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outline of EMI Suppression Filters (EMIFILr) for DC Line
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Common Mode Choke Coil .....p.124–139 ..........p.168Common Mode Choke Coil
Construction of Common Mode Choke Coil
Equivalent Circuit
Impedance - Frequency Characteristics (DLW31S)
oChip Common Mode Choke Coil
oCommon Mode Choke Coil
" These choke coils reduce common mode noise, which
causes problems on balanced transmission lines, and are
effective against common mode noise in the several MHz
to several 100MHz frequency range.
They are ideally suited for noise suppression on DC
power supply lines and interface cables.
Current of Common Mode (Noise)
Current of Differential Mode (Signal)
10000
1000
100
10
1
0.11 10 100 1000
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
SN222
SN102
SN601
SN261
SN161
SN900
Frequency (MHz)
Impedance (Ω)
Common mode
Differential mode
PLT09H
DLW31S
DLW21S DLW21H
DLW5BSDLW5AH DLW5BT
DLP31S
DLM2HG
DLP11S DLP31D
DLM11G
DLP2AD
DLP0NS
10
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outline of EMI Suppression Filters (EMIFILr) for DC Line
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
.............p.160–166
VFR3V VFS6V
EMIGUARDr
Construction of EMIGUARDr (VFS9V)
!Surge Absorption Effect of EMIGUARDr
oEMIGUARDr
VFS9V
" EMIGUARDr eliminates both surge noises and EMI
noises due to its dielectric varistor material.
" Effective when high frequency noise and high voltage
surge suppression are required, and also in situations
when surging starts at extremely high speeds. This type
of surging cannot be eliminated with general type
varistors.
Type of Filter
No filter
Three terminal capacitor is
used to suppress the surge.
EMIGUARDr is used to
suppress the surge. (VFS6V)
Surge Absorption Effect of EMIGUARDr
−1kV
4kV
500V
/div
−100ns 50ns/div 400ns
−1kV
4kV
500V
/div
−100ns 50ns/div 400ns
−1kV
4kV
500V
/div
−100ns 50ns/div 400ns
,
,
Varistor
Electrode
Ferrite
Lead
11
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outline of EMI Suppression Filters (EMIFILr) for DC Line
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Block Type EMIFILr...........p.140–144
Equivalent Circuit (BNX Series)
Insertion Loss Characteristics
Derating
oBlock Type EMIFILr
" Block type EMIFILr are resin encased, built-in, high
performance EMI suppression filters, which use a feed-
thru capacitor having excellent high frequency
characteristics.
" Used when the noise frequency is high, or when extreme
countermeasures are required.
" The high performance EMIFILr BNX series exhibits
significant noise suppression effects over a wide
frequency band (extending from 100kHz to 1GHz) in DC
power lines.
B
PSG
CB
PSG:
CG:
CB:
Power Supply Ground
Circuit Ground
Circuit + B
C2
L3L1
L2C1
CG
100
80
60
0
20
40
0.001 0.01 0.1 1 10 100 1000
Insertion Loss (dB)
Frequency (MHz)
BNX003-01
BNX002-01
(BNX005-01)
" In operating temperatures exceeding +85°C, derating of
current is necessary for BNX010 series. Please apply the
derating curve according to the operating temperature.
15
10
5
0
1
85-40 125102.5 120
Operating Temperature (°C)
Derated Current (A)
BNX012-01
BNX016-01
BNX005-01 BNX012-01 BNX016-01BNX002-01 BNX003-01BNX022/023
12
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
13
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued on the following page.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Beads Part Numbering
(Part Number)
Chip Ferrite Beads
eDimensions (LgW)
Code
0.4g0.2mm
0.6g0.3mm
1.0g0.5mm
1.6g0.8mm
2.0g1.0mm
2.0g1.25mm
3.2g1.6mm
4.5g1.6mm
Dimensions (LgW)
01005
0201
0402
0603
0804
0805
1206
1806
EIA
02
03
15
18
2A
21
31
41
qProduct ID
BL Chip Ferrite Beads
Product ID
wType
A
M
Array Type
Monolithic Type
Code Type
rCharacteristics/Applications
Code *1
for General Use
Characteristics/Applications
tImpedance
Expressed by three figures. The unit is in ohm (Ω) at 100MHz. The
first and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
yElectrode
Expressed by a letter.
uCategory
NStandard Type
Code Category
S/T
A
Sn Plating
Au Plating
Code Electrode
iNumber of Circuits
1
4
1 Circuit
4 Circuits
Code Number of Circuits
AG BLM02/03/15/18/21, BLA2A/31
TG BLM18
for High-speed Signal Lines
for Power Supplies
for Digital Interface
BA BLM15/18
BB BLM03/15/18/21, BLA2A
BD BLM03/15/18/21, BLA2A/31
PG
RK
BLM03/15/18/21/31/41
KG BLM18
PD BLM15
for Power Supplies (Low DC Resistance Type) BLM18SG
BLM15/18
BLM18/21
for GHz Band General Use (Low DC Resistance Type)
for GHz Band General UseHG
EG BLM15/18
for GHz Band High-speed Signal LinesHD
HE
HB
for GHz Band Digital InterfaceHK
BLM15
BLM15/18
BLM18
for High-GHz Band High-speed Signal LinesGA
for High-GHz Band General UseGG
Series
*1 Frequency characteristics vary with each code.
Ex.)
ty
102
q
BL
u
S
r
AG
e
18 1
o
D
w
M
i
N
14
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued from the preceding page.
oPackaging
K
L
B
J
D
C
BLM21
*1/31/41
All Series
BLM03/15/18
*3/21
*2, BLA2A/31
BLM02/03/15/18/21
*2, BLA2A/31
BLM15/18
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Bulk Case
Code Packaging Series
*1 BLM21BD222SN1/BLM21BD272SN1 only.
*2 Except BLM21BD222SN1/BLM21BD272SN1
*3 Except BLM18T
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
15
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
The chip ferrite bead BLM series is comprised of ferrite
beads in the shape of a chip. This ferrite bead generates a
high impedance which at high frequencies mainly consists
of a resistance element. BLM series is effective in circuits
without stable ground lines because BLM series does not
need a connection to ground.
Chip sizes of 0.4x0.2, 0.6x0.3, 1.0x0.5, 1.6x0.8, 2.0x1.25,
3.2x1.6 and 4.5x1.6mm are cataloged. (BLA series of array
type chip ferrite beads is also cataloged.)
The nickel barrier structure of the external electrodes
provides excellent solder heat resistance.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Bead BLM Series
!Features
BLM series is comprised of R series (for digital interface),
A/T series (for standard), B series (for high speed signal),
P/S series (for large current), H/E series (for GHz band
noise suppression), and G series (for High-GHz band noise
suppression).
1. BLM--R series – For Digital Interface
BLM-R series can be used in Digital Interface.
Resistance of BLM-R series especially grows in the lower
frequency range. Therefore BLM-R series is less effective
for digital signal waveform at low frequency range and
can suppress the ringing.
2. BLM--A/T series – For General Use
BLM-A series generates an impedance from the relatively
low frequencies. Therefore BLM-A series is effective in
noise suppression in the wide frequency range
(30MHz – several hundred MHz).
3. BLM--B series – For High Speed Signal
BLM-B series can minimize attenuation of the signal
waveform due to its sharp impedance characteristics.
Various impedances are available to match signal
frequency.
4. BLM--P/S series – For Large Current
BLM-P/S series can be used in high current circuits due
to its low DC resistance. It can match power lines to a
maximum of 6A DC.
5.
BLM--H/E series – For GHz Band Noise Suppression
BLM--H/E series has horizontal wire wound structure
that minimizes stray capacitance and increases the
effective frequency range.
6.
BLM--G series – For High-GHz Band Noise Suppression
BLM--G series has improved the performance in High-
GHz frequency area using newly developed low dielectric
ferrite material.
Covers Every Application in High Speed Signal Line,
DC Power Lines and High-GHz Noise Suppression
Impedance Characteristics
0
300
600
900
1200
1500
1800
1 10 100 30001000
Frequency (MHz)
Impedance (ohm)
BLM18GG471
BLM18HG471
BLM18RK471
BLM18BD471
BLM18AG471
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
16
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Impedance Map
1000
100
10
For Standard
BLMppA/T
For High Speed
Signal
BLMppB
For Digital
Interface
BLMppR
For Large Current
BLMppP/K/S
( )=Rated Current
GHz Range
Noise Suppression Type
BLMppH/E
High-GHz Range
Noise Suppression Type
BLMppG
Impedance (Ω) at 100MHz
mm
EIA
Code
10
0603 1005 1608 2012 1005 1608 2012
1608 2012 1608 2012 3216 4516 1608
0201 0402 0603 0805 0402
0603
0201 0603 0805
0603 0805
0603
0201 0603
1005
0402 0805 1206 1806 0603
70
120
10
0402
01005
70
120
240
10
70
120
220
600600
1000 1000
120
150
220
330
600
470
1000
120
150
220
330
600
1000
2500
2200
18001800
1500
1000
600
470
420
330
220
150
140
120
75
60
47
22
10
5
2700
2250
2200
1800
1800
1500
1000
750
600
470
420
330
220
200
150
120
75
60
5
600
470
220
120
1000
600
470
220
120
33 (0.75A)
22 (0.9A)
1000
180 (1.5A)
470 (1A)
470 (1.5A)
330 (1.2A)
330 (1.5A)
330 (1.7A)
220 (1.4A)
220 (2.2A)
220 (2.5A)
120 (2A)
120 (3A)
60 (0.5A)
70 (3.5A)
70 (4A)
33 (3A)
30 (1A)
26 (6A)
10 (1A)
30 (2.2A)
60 (1.7A)
80 (1.5A)
80
120 (1.3A)
220 (2A)
330 (1.5A)
60 (3A)
22 (6A)
30 (3A)
600 (1.5A)600 (1.3A)
1000 (1.5A)
1000
1500
600
470 470 470
390
330
220 220
120
100
470 (2A)
180 (3A)
75 (3A)
60 (6A)
390 (2A)
120 (3A)
50 (3A)
33 (6A)
600
470
220
7575 75
120120
240
47
33
47
22
10
22
10
5
470
1000
1005
0402
1608
0603
1005
0402
1000
600
220
120
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
17
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!BLM Series
Continued on the following page.
Type
Size (EIA Code)
0402
For Standard
(p. 25 – 26, p. 31)
For High Speed Signal
(Sharp impedance characteristics)
(p. 36 – 39)
Impedance (Ω)
at 100MHz at 1GHz
10 (Typ.)
70 (Typ.)
120±25%
220±25%
600±25%
1000±25%
600±25%
1000±25%
5±25%
10±25%
22±25%
33±25%
47±25%
75±25%
120±25%
220±25%
75±25%
120±25%
220±25%
470±25%
600±25%
1000±25%
1800±25%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Rated Current (mA)
1000
500
300
200
300
200
300
500
300
200
300
200
300
200
300
200
100
Part Number
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15AG601AN1
BLM15AG102AN1
BLM15BA050SN1
BLM15BB050SN1
BLM15BA100SN1
BLM15BB100SN1
BLM15BA220SN1
BLM15BB220SN1
BLM15BA330SN1
BLM15BA470SN1
BLM15BB470SN1
BLM15BA750SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BD750SN1
BLM15BD121SN1
BLM15BD221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
BLM15BD182SN1
For Large Current
(p. 56 – 57)
30±25%
60±25%
80±25%
120±25%
-
-
-
-
2200*
1700*
1500*
1300*
BLM15PD300SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
10 (Typ.) - 1000
BLM15PG100SN1
0201
For Standard
(p. 23 – 24)
For High Speed Signal
(p. 34 – 35)
For Large Current
(p. 55 – 56)
10 (Typ.)
70 (Typ.)
80±25%
120±25%
240±25%
600±25%
1000±25%
10±25%
22±25%
47±25%
75±25%
120±25%
75±25%
120±25%
240±25%
22±25%
33±25%
500
200
200
200
200
100
100
300
200
100
300
250
200
900
750
BLM03AG100SN1
BLM03AG700SN1
BLM03AG800SN1
BLM03AG121SN1
BLM03AG241SN1
BLM03AG601SN1
BLM03AG102SN1
BLM03BB100SN1
BLM03BB220SN1
BLM03BB470SN1
BLM03BB750SN1
BLM03BB121SN1
BLM03BD750SN1
BLM03BD121SN1
BLM03BD241SN1
BLM03PG220SN1
BLM03PG330SN1
01005 For Standard
(p. 21 – 22)
10 (Typ.)
70±25%
120±25%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
250
200
BLM02AG100SN1
BLM02AG700SN1
BLM02AG121SN1
* Please see p.57 "Derating of Rated Current".
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
18
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued from the preceding page.
Continued on the following page.
For High Speed Signal
(Sharp impedance characteristics)
(p. 40 – 45)
Type
Size (EIA Code)
at 100MHz at 1GHz
Impedance (Ω)Rated Current (mA)Part Number
* Please see p.73 "Derating of Rated Current".
5±25%
10±25%
22±25%
-
-
-
-
-
-
500
700
500
700
500
600
BLM18BA050SN1
BLM18BB050SN1
BLM18BA100SN1
BLM18BB100SN1
BLM18BA220SN1
BLM18BB220SN1
0603
0402
For Standard
(p. 27 – 28, p. 32 – 33)
120±25%
150±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
120±25%
220±25%
600±25%
1000±25%
-
-
-
-
-
-
-
-
-
-
-
500
400
200
100
BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
BLM18TG121TN1
BLM18TG221TN1
BLM18TG601TN1
BLM18TG102TN1
600±25%
1000±25%
120±25%
220±25%
600±25%
1000±25%
1800±25%
120±25%
220±25%
1000±40%
1400±40%
500±40%
900±40%
1400±40%
2000±40%
2700±40%
145 (Typ.)
270 (Typ.)
300
250
300
250
300
250
200
1500*
700*
BLM15HG601SN1
BLM15HG102SN1
BLM15HB121SN1
BLM15HB221SN1
BLM15HD601SN1
BLM15HD102SN1
BLM15HD182SN1
BLM15EG121SN1
BLM15EG221SN1
75±25%
220±25%
470±25%
1000±40%
600±40%
1200±40%
200
300
200
BLM15GA750SN1
BLM15GG221SN1
BLM15GG471SN1
GHz Band
High-GHz
Band
For Standard
(p. 69 – 70)
For High Speed Signal
(p. 69 – 71)
For High Speed Signal
(p. 81 – 82)
For Standard (Low DC
Resistance Type)
(p. 72)
For Standard (Low DC
Resistance Type)
(p. 81 – 82)
47±25%
60±25%
75±25%
120±25%
140±25%
150±25%
220±25%
330±25%
420±25%
470±25%
600±25%
1000±25%
1500±25%
1800±25%
2200±25%
2500±25%
300
550
500
550
300
500
200
500
200
450
450
200
450
200
400
200
300
200
200
100
50
BLM18BA470SN1
BLM18BB470SN1
BLM18BD470SN1
BLM18BB600SN1
BLM18BA750SN1
BLM18BB750SN1
BLM18BA121SN1
BLM18BB121SN1
BLM18BD121SN1
BLM18BB141SN1
BLM18BB151SN1
BLM18BD151SN1
BLM18BB221SN1
BLM18BD221SN1
BLM18BB331SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BB471SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
19
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued from the preceding page.
Continued on the following page.
TypeSize (inches) Impedance (Ω)
at 100MHz at 1GHz Rated Current (mA)Part Number
* Please see p.68, p.78, p.80 "Derating of Rated Current".
0603
GHz Band
High-GHz Band
For Digital
Interface
(p. 74 – 77)
For Standard
(Low DC
Resistance Type)
(p. 78 – 79)
(p. 83)
330±25%
470±25%
600±25%
1000±25%
100±25%
120±25%
220±25%
330±25%
390±25%
470±25%
600±25%
470±25%
200
100
50
2000*
2000*
1000
2000*
500
500
500
500
200
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
BLM18EG101TN1
BLM18EG121SN1
BLM18EG221TN1
BLM18EG221SN1
BLM18EG331TN1
BLM18EG391TN1
BLM18EG471SN1
BLM18EG601SN1
BLM18GG471SN1
400±40%
600±40%
700±40%
1200±40%
140 (Typ.)
145 (Typ.)
300 (Typ.)
260 (Typ.)
450 (Typ.)
520 (Typ.)
550 (Typ.)
700 (Typ.)
1800±30%
600±25%
1000±25%
1500±25%
800*
600*
500*
BLM18HE601SN1
BLM18HE102SN1
BLM18HE152SN1
600 (Typ.)
1000 (Typ.)
1500 (Typ.)
For Standard
(p. 74 – 76)
For High Speed
Signal
(p. 74 – 77)
For Standard
(Low DC
Resistance Type)
(p. 67 – 68)
26±25%
70±25%
120±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
120±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
6000*
4000*
3000*
2500*
1500*
200
100
200
100
50
100
50
BLM18SG260TN1
BLM18SG700TN1
BLM18SG121TN1
BLM18SG221TN1
BLM18SG331TN1
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
-
-
-
-
-
600 (Typ.)
700 (Typ.)
1000 (Typ.)
500±40%
1100±40%
1600±40%
1000 (Typ.)
1200 (Typ.)
1700 (Typ.)
For Large
Current
For Standard
(p. 58 – 59
p. 64 – 66)
30 (Typ.)
33±25%
60 (Typ.)
120±25%
180±25%
220±25%
330±25%
470±25%
1000
3000*
500
2000*
1500*
1400*
1200*
1000
BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
BLM18PG221SN1
BLM18PG331SN1
BLM18PG471SN1
-
-
-
-
-
-
-
-
26±25%
70±25%
120±25%
220±25%
330±25%
470±25%
600±25%
6000*
3500*
3000*
2200*
1700*
1500*
1300*
BLM18KG260TN1
BLM18KG700TN1
BLM18KG121TN1
BLM18KG221SN1
BLM18KG331SN1
BLM18KG471SN1
BLM18KG601SN1
-
-
-
-
-
-
-
For Digital Interface
(p. 50 – 51)
120±25%
220±25%
470±25%
600±25%
1000±25%
200
BLM18RK121SN1
BLM18RK221SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1
-
-
-
-
-
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
20
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued from the preceding page.
1206
1806
For Large Current
(p. 61 – 62)
For Large Current
(p. 63 – 64)
33±25%
50 (Typ.)
120±25%
390±25%
600±25%
60 (Typ.)
75 (Typ.)
180±25%
470±25%
1000±25%
6000*
3000*
2000*
1500*
6000*
3000*
3000*
2000*
1500*
BLM31PG330SN1
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
TypeSize (inches) Impedance (Ω)
at 100MHz
-
-
-
-
-
-
-
-
-
-
at 1GHz Rated Current (mA)Part Number
* Please see p.68 "Derating of Rated Current".
For Digital Interface
(p. 52 – 53)
For Large Current
(p. 60 – 61)
120±25%
220±25%
470±25%
600±25%
1000±25%
22±25%
30 (Typ.)
60±25%
220±25%
330±25%
200
6000*
3000*
2000*
1500*
BLM21RK121SN1
BLM21RK221SN1
BLM21RK471SN1
BLM21RK601SN1
BLM21RK102SN1
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG221SN1
BLM21PG331SN1
-
-
-
-
-
-
-
-
-
-
0805
For Standard
(p. 29 – 30)
For High Speed Signal
(Sharp impedance characteristics)
(p. 46 – 49)
120±25%
150±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
5±25%
60±25%
75±25%
120±25%
150±25%
200±25%
220±25%
330±25%
420±25%
470±25%
600±25%
750±25%
1000±25%
1500±25%
1800±25%
2250 (Typ.)
2200±25%
2700±25%
200
500
200
BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AG102SN1
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BD121SN1
BLM21BB151SN1
BLM21BD151SN1
BLM21BB201SN1
BLM21BB221SN1
BLM21BD221SN1
BLM21BB331SN1
BLM21BD331SN1
BLM21BD421SN1
BLM21BB471SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD751SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222SN1
BLM21BD222TN1
BLM21BD272SN1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
21
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Beads BLM02/03/15/18/21/31/41 Series
■ Features (BLM_A Series)
The chip ferrite beads BLM series is designed to
function nearly as a resistor at noise frequencies,
which greatly reduces the possibility of resonance and
leaves signal wave forms undistorted.
BLM series is effective in circuits without stable
ground lines because BLM series does not need a
connection to ground.
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_A series generates an impedance from the
relatively low frequencies. Therefore BLM_A series is
effective in noise suppression in a wide frequency
range (30MHz to several hundred MHz).
The small size of BLM02A series (0.4x0.2mm) is
suitable for noise suppression in small equipment such
as PA modules for cellular phones.
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM02A Series (01005 Size)
(in mm)
0.4±0.02 0.2±0.02
0.2±0.02
0.10+0.04/–0.03
: Electrode
BLM02A Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM02AG100SN1 10 (Typ.) 500 0.1 -55 to +125
BLM02AG700SN1 70 ±25% 250 0.5 -55 to +125
BLM02AG121SN1 120 ±25% 200 0.8 -55 to +125
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
22
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency (Typical)
BLM02A Series
Impedance (Ω)
0
50
100
150
200
250
Frequency (MHz)
1 10 100 1000 3000
BLM02AG100SN1
BLM02AG700SN1
BLM02AG121SN1
■ Impedance - Frequency Characteristics
BLM02AG100SN1
0
5
10
15
20
Z
R
X
1 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM02AG700SN1
Z
R
X
1 10 100 30001000
Frequency (MHz)
Impedance (Ω)
0
50
100
150
200
BLM02AG121SN1
0
50
100
150
200
250
Z
R
X
Impedance (Ω)
1 10 100 30001000
Frequency (MHz)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
23
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM03A Series (0201 Size)
(in mm)
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
: electrode
BLM03A Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM03AG100SN1 10 (Typ.) 500 0.1 -55 to +125
BLM03AG700SN1 70 (Typ.) 200 0.4 -55 to +125
BLM03AG800SN1 80 ±25% 200 0.4 -55 to +125
BLM03AG121SN1 120 ±25% 200 0.5 -55 to +125
BLM03AG241SN1 240 ±25% 200 0.8 -55 to +125
BLM03AG601SN1 600 ±25% 100 1.5 -55 to +125
BLM03AG102SN1 1000 ±25% 100 2.5 -55 to +125
■ Impedance - Frequency (Typical)
BLM03A Series
0
250
500
750
1000
1250
1500
1 100 1000 3000
Impedance (Ω)
Frequency (MHz)
10
BLM03AG102SN1
BLM03AG601SN1
BLM03AG241SN1
BLM03AG121SN1
BLM03AG800SN1
BLM03AG700SN1
BLM03AG100SN1
■ Impedance - Frequency Characteristics
BLM03AG100SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
5
10
15
20
R
X
Z
BLM03AG700SN1
Frequency (MHz)
Impedance (Ω)
0
20
40
60
80
100
120
R
X
Z
1 10 100 1000 3000
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
24
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM03AG800SN1
0
40
80
120
160
1 1000
Z
R
X
3000
Impedance (Ω)
Frequency (MHz)
10 100
BLM03AG121SN1
0
40
80
120
160
200
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM03AG241SN1
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
R
X
Z
1 10 100 1000 3000
BLM03AG601SN1
Z
R
X
1000
800
600
400
200
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03AG102SN1
1 10 100 30001000
Frequency (MHz)
Impedance (Ω)
0
300
600
900
1200
1500
Z
R
X
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
25
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM15A Series (0402 Size)
(in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15A Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15AG100SN1 10 (Typ.) 1000 0.05 -55 to +125
BLM15AG700SN1 70 (Typ.) 500 0.15 -55 to +125
BLM15AG121SN1 120 ±25% 500 0.25 -55 to +125
BLM15AG221SN1 220 ±25% 300 0.35 -55 to +125
BLM15AG601SN1 600 ±25% 300 0.6 -55 to +125
BLM15AG102SN1 1000 ±25% 200 1.0 -55 to +125
■ Impedance - Frequency (Typical)
BLM15A Series
0
200
400
600
800
1000
1200
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM15AG102SN1
BLM15AG601SN1
BLM15AG221SN1
BLM15AG121SN1
BLM15AG700SN1
BLM15AG100SN1
■ Impedance - Frequency Characteristics
BLM15AG100SN1
0
5
10
15
20
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15AG700SN1
0
20
40
60
80
100
120
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
26
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM15AG121SN1
0
50
100
150
200
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15AG221SN1
0
100
200
300
400
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15AG601SN1
0
200
400
600
800
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15AG102SN1
Z
R
X
1200
900
600
300
01 10 100 1000
Impedance (Ω)
Frequency (MHz)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
27
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18A Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)
BLM18A Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18AG121SN1 120 ±25% 500 0.18 -55 to +125
BLM18AG151SN1 150 ±25% 500 0.25 -55 to +125
BLM18AG221SN1 220 ±25% 500 0.25 -55 to +125
BLM18AG331SN1 330 ±25% 500 0.30 -55 to +125
BLM18AG471SN1 470 ±25% 500 0.35 -55 to +125
BLM18AG601SN1 600 ±25% 500 0.38 -55 to +125
BLM18AG102SN1 1000 ±25% 400 0.50 -55 to +125
■ Impedance - Frequency (Typical)
BLM18A Series
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM18AG102SN1
BLM18AG601SN1
BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
■ Impedance - Frequency Characteristics
BLM18AG121SN1
200
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18AG151SN1
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
28
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18AG221SN1
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18AG331SN1
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18AG471SN1
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18AG601SN1
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18AG102SN1
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
29
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM21A Series (0805 Size)
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805 (in mm)
0.85±0.2
BLM21A Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM21AG121SN1 120 ±25% 200 0.15 -55 to +125
BLM21AG151SN1 150 ±25% 200 0.15 -55 to +125
BLM21AG221SN1 220 ±25% 200 0.20 -55 to +125
BLM21AG331SN1 330 ±25% 200 0.25 -55 to +125
BLM21AG471SN1 470 ±25% 200 0.25 -55 to +125
BLM21AG601SN1 600 ±25% 200 0.30 -55 to +125
BLM21AG102SN1 1000 ±25% 200 0.45 -55 to +125
■ Impedance - Frequency (Typical)
BLM21A Series
1200
900
600
300
01 10 100 1000
BLM21AG331SN1
BLM21AG221SN1
BLM21AG601SN1
BLM21AG471SN1
BLM21AG121SN1
BLM21AG102SN1
BLM21AG151SN1
Frequency (MHz)
Impedance (Ω)
■ Impedance - Frequency Characteristics
BLM21AG121SN1
200
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21AG151SN1
200
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
30
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM21AG221SN1
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21AG331SN1
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21AG471SN1
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21AG601SN1
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21AG102SN1
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
31
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM15A Series Gold Plating (0402 Size)
■ Features
1. Au plating for wire bonding mounting
2. BLM_A series generates an impedance from the
relatively low frequencies. Therefore BLM_A
series is effective in noise suppression in a
wide frequency range (30MHz to several hundred MHz).
■ Applications
1. Optical transceiver modules
2. Optical pickup modules (in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15A Series
(gold plating)
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15AG601AN1 600 ±25% 300 0.6 -55 to +125
BLM15AG102AN1 1000 ±25% 200 1.0 -55 to +125
■ Impedance - Frequency (Typical)
BLM15A Series (gold plating)
0
200
400
600
800
1000
1200
1 10 100 20001000
Frequency (MHz)
Impedance (Ω)
BLM15AG102AN1
BLM15AG601AN1
■ Impedance - Frequency Characteristics
BLM15AG601AN1
R
X
Z
0
200
400
600
800
1 10 100 20001000
Frequency (MHz)
Impedance (Ω)
BLM15AG102AN1
R
X
Z
0
200
400
600
800
1000
1200
1 10 100 20001000
Frequency (MHz)
Impedance (Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
32
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18T Series (0603 Size)
■ Features
The chip ferrite beads BLM series is designed to
function nearly as a resistor at noise frequencies,
which greatly reduces the possibility of resonance and
leaves signal wave forms undistorted.
BLM series is effective in circuits without stable
ground lines because BLM series does not need a
connection to ground.
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_T series generates an impedance from the
relatively low frequencies. Therefore BLM_T series is
effective in noise suppression in a wide frequency
range (10MHz to several hundred MHz).
BLM_T series contributes further to miniaturizing
portable equipment.
1.6±0.15 0.8±0.15
0.4±0.2
(in mm)
0.6±0.10
: Electrode
BLM18T Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18TG121TN1 120 ±25% 200 0.25 -55 to +125
BLM18TG221TN1 220 ±25% 200 0.30 -55 to +125
BLM18TG601TN1 600 ±25% 200 0.45 -55 to +125
BLM18TG102TN1 1000 ±25% 100 0.60 -55 to +125
■ Impedance - Frequency (Typical)
BLM18T Series
BLM18TG102TN1
BLM18TG601TN1
BLM18TG221TN1
BLM18TG121TN1
1200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
800
400
■ Impedance - Frequency Characteristics
BLM18TG121TN1
Z
R
X
150
120
90
60
30
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM18TG221TN1
Z
R
X
300
250
200
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
33
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18TG601TN1
Z
R
X
800
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
600
400
200
BLM18TG102TN1
Z
R
X
1200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
800
400
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
34
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Features (BLM_B Series)
The chip ferrite beads BLM series is designed to
function nearly as a resistor at noise frequencies,
which greatly reduces the possibility of resonance and
leaves signal wave forms undistorted.
BLM series is effective in circuits without stable
ground lines because BLM series does not need a
connection to ground.
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_B series can minimize attenuation of the
signal waveform due to its sharp impedance
characteristics. Various impedances are available to
match signal frequency.
The small size of BLM03B series (0.6x0.3mm) is
suitable for advanced high-density mounting, and is
followed on a miniaturization of digital equipment,
or module of a functional portion.
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM03B Series (0201 Size)
(in mm)
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
: electrode
BLM03B Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM03BB100SN1 10 ±25% 300 0.4 -55 to +125
BLM03BB220SN1 22 ±25% 200 0.5 -55 to +125
BLM03BB470SN1 47 ±25% 200 0.7 -55 to +125
BLM03BB750SN1 75 ±25% 200 1.0 -55 to +125
BLM03BD750SN1 75 ±25% 300 0.4 -55 to +125
BLM03BB121SN1 120 ±25% 100 1.5 -55 to +125
BLM03BD121SN1 120 ±25% 250 0.5 -55 to +125
BLM03BD241SN1 240 ±25% 200 0.8 -55 to +125
■ Impedance - Frequency (Typical)
BLM03BB Series
800
600
400
200
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03BB121SN1
BLM03BB470SN1
BLM03BB220SN1
BLM03BB100SN1
BLM03BB750SN1
BLM03BD Series
1 10 100 30001000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
BLM03BD750SN1
BLM03BD121SN1
BLM03BD241SN1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
35
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM03BB100SN1
Z
R
X
80
60
40
20
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03BB220SN1
Z
R
X
200
150
100
50
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03BB470SN1
Z
R
X
400
300
200
100
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03BB750SN1
Z
R
X
600
450
300
150
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03BD750SN1
1 10
50
0
150
200
100
100 30001000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM03BB121SN1
R
X
Z
800
600
400
200
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM03BD121SN1
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
60
120
180
240
300
1 10 100 1000 3000
BLM03BD241SN1
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
1 10 100 1000 3000
Z
R
X
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
36
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM15B Series (0402 Size)
(in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15B Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15BA050SN1 5 ±25% 300 0.10 -55 to +125
BLM15BB050SN1 5 ±25% 500 0.08 -55 to +125
BLM15BA100SN1 10 ±25% 300 0.20 -55 to +125
BLM15BB100SN1 10 ±25% 300 0.10 -55 to +125
BLM15BA220SN1 22 ±25% 300 0.30 -55 to +125
BLM15BB220SN1 22 ±25% 300 0.20 -55 to +125
BLM15BA330SN1 33 ±25% 300 0.40 -55 to +125
BLM15BA470SN1 47 ±25% 200 0.60 -55 to +125
BLM15BB470SN1 47 ±25% 300 0.35 -55 to +125
BLM15BA750SN1 75 ±25% 200 0.80 -55 to +125
BLM15BB750SN1 75 ±25% 300 0.40 -55 to +125
BLM15BD750SN1 75 ±25% 300 0.20 -55 to +125
BLM15BB121SN1 120 ±25% 300 0.55 -55 to +125
BLM15BD121SN1 120 ±25% 300 0.30 -55 to +125
BLM15BB221SN1 220 ±25% 200 0.80 -55 to +125
BLM15BD221SN1 220 ±25% 300 0.40 -55 to +125
BLM15BD471SN1 470 ±25% 200 0.60 -55 to +125
BLM15BD601SN1 600 ±25% 200 0.65 -55 to +125
BLM15BD102SN1 1000 ±25% 200 0.90 -55 to +125
BLM15BD182SN1 1800 ±25% 100 1.40 -55 to +125
■ Impedance - Frequency (Typical)
BLM15BA Series
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
1000100101 2000
BLM15BA330SN1
BLM15BA220SN1
BLM15BA100SN1
BLM15BA050SN1
BLM15BA Series
Frequency (MHz)
Impedance (Ω)
0
1000
2000
3000
4000
5000
1000100101 2000
BLM15BA750SN1
BLM15BA470SN1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
37
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency (Typical)
BLM15BB Series
0
100
200
300
400
500
600
700
800
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM15BB221SN1
BLM15BB121SN1
BLM15BB750SN1
BLM15BB470SN1
BLM15BB220SN1
BLM15BB100SN1
BLM15BB050SN1
BLM15BD Series
BLM15BD601SN1
BLM15BD471SN1
BLM15BD102SN1
BLM15BD182SN1
BLM15BD221SN1
BLM15BD121SN1
BLM15BD750SN1
2500
2000
1500
500
1000
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
■ Impedance - Frequency Characteristics
BLM15BA050SN1
0
20
40
60
80
100
120
1000100101 2000
Impedance (Ω)
Frequency (MHz)
Z
R
X
BLM15BB050SN1
0
5
10
15
20
25
30
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15BA100SN1
Frequency (MHz)
Impedance (Ω)
0
40
80
120
160
200
240
1000100101 2000
Z
R
X
BLM15BB100SN1
0
10
20
30
40
50
60
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15BA220SN1
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
600
1000100101 2000
X
Z
R
BLM15BB220SN1
0
20
40
60
80
120
100
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
38
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM15BA330SN1
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
1000100101 2000
Z
RX
BLM15BA470SN1
Frequency (MHz)
Impedance (Ω)
0
400
800
1200
1600
2000
1000100101 2000
Z
RX
BLM15BB470SN1
1000 2000
0
50
100
150
200
250
300
1 10 100
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15BA750SN1
0
1000
2000
3000
4000
5000
1000100101 Frequency (MHz) 2000
Impedance (Ω)
ZR
X
BLM15BB750SN1
0
100
200
300
400
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15BD750SN1
0
50
100
150
200
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
Z
R
X
BLM15BB121SN1
0
150
300
450
600
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15BD121SN1
0
75
150
225
300
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
39
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM15BB221SN1
0
200
400
600
800
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15BD221SN1
0
150
300
450
600
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
Z
R
X
BLM15BD471SN1
R
X
Z
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
1000
750
500
250
0
BLM15BD601SN1
R
X
Z
1200
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM15BD102SN1
R
X
Z
1600
1200
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM15BD182SN1
R
X
Z
0
500
1000
1500
2000
2500
1 10 100 20001000
Frequency (MHz)
Impedance (Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
40
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18B Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)
BLM18B Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18BA050SN1 5 ±25% 500 0.20 -55 to +125
BLM18BB050SN1 5 ±25% 700 0.05 -55 to +125
BLM18BA100SN1 10 ±25% 500 0.25 -55 to +125
BLM18BB100SN1 10 ±25% 700 0.10 -55 to +125
BLM18BA220SN1 22 ±25% 500 0.35 -55 to +125
BLM18BB220SN1 22 ±25% 600 0.20 -55 to +125
BLM18BA470SN1 47 ±25% 300 0.55 -55 to +125
BLM18BB470SN1 47 ±25% 550 0.25 -55 to +125
BLM18BD470SN1 47 ±25% 500 0.30 -55 to +125
BLM18BB600SN1 60 ±25% 550 0.25 -55 to +125
BLM18BA750SN1 75 ±25% 300 0.70 -55 to +125
BLM18BB750SN1 75 ±25% 500 0.30 -55 to +125
BLM18BA121SN1 120 ±25% 200 0.90 -55 to +125
BLM18BB121SN1 120 ±25% 500 0.30 -55 to +125
BLM18BD121SN1 120 ±25% 200 0.40 -55 to +125
BLM18BB141SN1 140 ±25% 450 0.35 -55 to +125
BLM18BB151SN1 150 ±25% 450 0.37 -55 to +125
BLM18BD151SN1 150 ±25% 200 0.40 -55 to +125
BLM18BB221SN1 220 ±25% 450 0.45 -55 to +125
BLM18BD221SN1 220 ±25% 200 0.45 -55 to +125
BLM18BB331SN1 330 ±25% 400 0.58 -55 to +125
BLM18BD331SN1 330 ±25% 200 0.50 -55 to +125
BLM18BD421SN1 420 ±25% 200 0.55 -55 to +125
BLM18BB471SN1 470 ±25% 300 0.85 -55 to +125
BLM18BD471SN1 470 ±25% 200 0.55 -55 to +125
BLM18BD601SN1 600 ±25% 200 0.65 -55 to +125
BLM18BD102SN1 1000 ±25% 100 0.85 -55 to +125
BLM18BD152SN1 1500 ±25% 50 1.20 -55 to +125
BLM18BD182SN1 1800 ±25% 50 1.50 -55 to +125
BLM18BD222SN1 2200 ±25% 50 1.50 -55 to +125
BLM18BD252SN1 2500 ±25% 50 1.50 -55 to +125
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
41
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency (Typical)
BLM18BA Series
01 10 100 1000 2000
600
450
300
150
Frequency (MHz)
Impedance (Ω)
BLM18BA050SN1
BLM18BA100SN1
BLM18BA220SN1
BLM18BA Series
01 10 100 1000 2000
10000
7500
5000
2500
Frequency (MHz)
Impedance (Ω)
BLM18BA470SN1
BLM18BA121SN1
BLM18BA750SN1
BLM18BB Series
200
250
150
100
50
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18BB470SN1
BLM18BB220SN1
BLM18BB100SN1
BLM18BB050SN1
BLM18BB Series
2000
1500
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18BB141SN1
BLM18BB750SN1
BLM18BB121SN1
BLM18BB600SN1
BLM18BB151SN1
BLM18BB221SN1
BLM18BB331SN1
BLM18BB471SN1
BLM18BD Series
0
700
1400
2100
2800
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18BD252SN1
BLM18BD222SN1
BLM18BD182SN1
BLM18BD152SN1
BLM18BD102SN1
BLM18BD601SN1
BLM18BD471SN1
BLM18BD421SN1
BLM18BD331SN1
BLM18BD221SN1
BLM18BD151SN1
BLM18BD121SN1
BLM18BD470SN1
■ Impedance - Frequency Characteristics
BLM18BA050SN1
Z
R
X
01 10 100 1000 2000
100
75
50
25
Frequency (MHz)
Impedance (Ω)
BLM18BB050SN1
30
20
10
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
42
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18BA100SN1
R
X
01 10 100 1000 2000
200
150
100
50
Frequency (MHz)
Impedance (Ω)
Z
BLM18BB100SN1
50
30
40
20
10
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
ZR
X
BLM18BA220SN1
R
X
01 10 100 1000 2000
600
450
300
150
Frequency (MHz)
Impedance (Ω)
Z
BLM18BB220SN1
100
75
50
25
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BA470SN1
R
01 10 100 1000 2000
1600
1200
800
400
Frequency (MHz)
Impedance (Ω)
Z
X
BLM18BB470SN1
200
250
150
100
50
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BD470SN1
0
50
100
150
200
1 10 100 1000
Z
R
X
2000
Impedance (Ω)
Frequency (MHz)
BLM18BB600SN1
300
240
60
120
180
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
43
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18BA750SN1
01 10 100 1000 2000
6000
4500
3000
1500
Frequency (MHz)
Impedance (Ω)
ZX
R
BLM18BB750SN1
400
300
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BA121SN1
01 10 100 1000 2000
10000
7500
5000
2500
Frequency (MHz)
Impedance (Ω)
ZX
R
BLM18BB121SN1
500
400
300
100
200
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BD121SN1
400
300
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BB141SN1
600
450
300
150
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BB151SN1
600
450
300
150
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BD151SN1
400
200
300
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
44
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18BB221SN1
1000
800
600
400
200
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
ZR
X
BLM18BD221SN1
500
400
300
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18BB331SN1
1500
1200
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
ZR
X
BLM18BD331SN1
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD421SN1
1000
750
500
250
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BB471SN1
2000
1200
1600
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD471SN1
1200
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD601SN1
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
R
X
Z
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
45
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18BD102SN1
2000
1600
1200
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD152SN1
2500
1500
2000
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD182SN1
2500
2000
1500
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD222SN1
2500
2000
1500
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18BD252SN1
3000
2000
1000
2500
1500
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
46
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM21B Series (0805 Size)
2.0±0.2
0.5±0.2 *2
1.25±0.2
*1 BLM21BD222SN1 / 21BD272SN1
:1.25±0.2
*2
EIA CODE : 0805
BLM21BD272SN1: 0.3±0.2
in mm
0.85±0.2 *1
BLM21B Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM21BB050SN1 5 ±25% 500 0.07 -55 to +125
BLM21BB600SN1 60 ±25% 200 0.20 -55 to +125
BLM21BB750SN1 75 ±25% 200 0.25 -55 to +125
BLM21BB121SN1 120 ±25% 200 0.25 -55 to +125
BLM21BD121SN1 120 ±25% 200 0.25 -55 to +125
BLM21BB151SN1 150 ±25% 200 0.25 -55 to +125
BLM21BD151SN1 150 ±25% 200 0.25 -55 to +125
BLM21BB201SN1 200 ±25% 200 0.35 -55 to +125
BLM21BB221SN1 220 ±25% 200 0.35 -55 to +125
BLM21BD221SN1 220 ±25% 200 0.25 -55 to +125
BLM21BB331SN1 330 ±25% 200 0.40 -55 to +125
BLM21BD331SN1 330 ±25% 200 0.30 -55 to +125
BLM21BD421SN1 420 ±25% 200 0.30 -55 to +125
BLM21BB471SN1 470 ±25% 200 0.45 -55 to +125
BLM21BD471SN1 470 ±25% 200 0.35 -55 to +125
BLM21BD601SN1 600 ±25% 200 0.35 -55 to +125
BLM21BD751SN1 750 ±25% 200 0.40 -55 to +125
BLM21BD102SN1 1000 ±25% 200 0.40 -55 to +125
BLM21BD152SN1 1500 ±25% 200 0.45 -55 to +125
BLM21BD182SN1 1800 ±25% 200 0.50 -55 to +125
BLM21BD222TN1 2200 ±25% 200 0.60 -55 to +125
BLM21BD222SN1 2250 (Typ.) 200 0.60 -55 to +125
BLM21BD272SN1 2700 ±25% 200 0.80 -55 to +125
■ Impedance - Frequency (Typical)
BLM21BB Series
2000
1200
1600
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM21BB151SN1
BLM21BB121SN1
BLM21BB471SN1
BLM21BB201SN1
BLM21BB600SN1
BLM21BB331SN1
BLM21BB221SN1
BLM21BB750SN1
BLM21BB050SN1
BLM21BD Series
3200
2400
1600
800
01 10 100 1000 2000
BLM21BD331SN1
BLM21BD471SN1
BLM21BD221SN1
BLM21BD152SN1
BLM21BD151SN1
BLM21BD121SN1
BLM21BD601SN1
BLM21BD222TN1
BLM21BD102SN1
BLM21BD751SN1
BLM21BD272SN1
BLM21BD222SN1
BLM21BD182SN1
BLM21BD421SN1
Frequency (MHz)
Impedance (Ω)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
47
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM21BB050SN1
30
20
10
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM21BB600SN1
400
300
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BB750SN1
500
300
400
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BB121SN1
400
200
500
300
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD121SN1
300
180
60
240
120
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BB151SN1
800
600
400
200
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD151SN1
300
240
120
180
60
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BB201SN1
800
600
200
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
48
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM21BB221SN1
1000
800
600
400
200
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD221SN1
500
400
300
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BB331SN1
1200
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD331SN1
800
600
400
200
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD421SN1
1000
600
800
400
200
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BB471SN1
2000
1500
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD471SN1
1200
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD601SN1
1200
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
49
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM21BD751SN1
1500
1200
900
300
600
01 10 100 1000 2000
R
X
Z
Frequency (MHz)
Impedance (Ω)
BLM21BD102SN1
1800
1200
1500
900
600
300
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD152SN1
2500
1500
2000
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD182SN1
2500
1500
2000
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD222TN1
2400
1800
1200
600
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD222SN1
3000
2400
1800
1200
600
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM21BD272SN1
3500
2500
1500
3000
2000
1000
500
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
R
X
Z
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
50
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Features (BLM_R Series)
The chip ferrite beads BLM series is designed to
function nearly as a resistor at noise frequencies,
which greatly reduces the possibility of resonance and
leaves signal wave forms undistorted.
BLM series is effective in circuits without stable
ground lines because BLM series does not need a
connection to ground.
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_R series can be used in a digital Interface.
Resistance of BLM_R series especially grows in the
lower frequency range. Therefore BLM_R series is less
effective for digital signal waveform at low frequency
range and can suppress the ringing.
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM18R Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)
BLM18R Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18RK121SN1 120 ±25% 200 0.25 -55 to +125
BLM18RK221SN1 220 ±25% 200 0.30 -55 to +125
BLM18RK471SN1 470 ±25% 200 0.50 -55 to +125
BLM18RK601SN1 600 ±25% 200 0.60 -55 to +125
BLM18RK102SN1 1000 ±25% 200 0.80 -55 to +125
■ Impedance - Frequency (Typical)
BLM18R Series
1200
900
600
300
01 10 100 1000
BLM18RK601SN1
BLM18RK471SN1
BLM18RK121SN1
BLM18RK102SN1
BLM18RK221SN1
Frequency (MHz)
Impedance (Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
51
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency Characteristics
BLM18RK121SN1
200
150
100
50
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM18RK221SN1
400
300
200
100
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM18RK471SN1
600
450
300
150
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM18RK601SN1
1000
750
500
250
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM18RK102SN1
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
52
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM21R Series (0805 Size)
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805 (in mm)
0.85±0.2
BLM21R Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM21RK121SN1 120 ±25% 200 0.15 -55 to +125
BLM21RK221SN1 220 ±25% 200 0.20 -55 to +125
BLM21RK471SN1 470 ±25% 200 0.25 -55 to +125
BLM21RK601SN1 600 ±25% 200 0.30 -55 to +125
BLM21RK102SN1 1000 ±25% 200 0.50 -55 to +125
■ Impedance - Frequency (Typical)
BLM21R Series
1200
900
600
300
01 10 100 1000
BLM21RK601SN1
BLM21RK471SN1
BLM21RK121SN1
BLM21RK102SN1
BLM21RK221SN1
Frequency (MHz)
Impedance (Ω)
■ Impedance - Frequency Characteristics
BLM21RK121SN1
200
150
100
50
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM21RK221SN1
300
225
150
75
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
53
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM21RK471SN1
600
450
300
150
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM21RK601SN1
1000
750
500
250
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
BLM21RK102SN1
1200
900
600
300
01 10 100 1000
Z
R
X
Frequency (MHz)
Impedance (Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Waveform Distortion Suppressing
Performance of BLM--R Series
Type of Filter
Initial
(No filter)
Resister (47Ω) is used
BLM18RK221SN1
(220Ω at 100MHz)
is used
EMI Suppression Effect / Description
Ringing is caused on the signal waveform.
Such ringing contains several hundred MHz harmonic components and generates noise.
Measuring Circuits
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum
Frequency (MHz)
30 30050 100 150 200 250
45
85
50
55
60
65
70
75
80
Level (dBµV)
Comparing initial waveform, ringing is suppressed a little.
However there still remains high level waveform distortion.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum
Frequency (MHz)
30 30050 100 150 200 250
45
85
50
55
60
65
70
75
80
Level (dBµV)
BLM18R has excellent performance for noise suppression and waveform distortion suppression.
BLM18R suppresses drastically not only spectrum level in more than 100MHz range but waveform distortion.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum
Frequency (MHz)
30 30050 100 150 200 250
45
85
50
55
60
65
70
75
80
Level (dBµV)
AC04
Filter
Measuring Point
AC00
Pattern20cm
1MHz
EMI Suppression Effect
Noise Suppression Effect of BLM_R Series
54
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
55
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM03P Series (0201 Size)
(in mm)
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
: electrode
BLM03P Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM03PG220SN1 22 ±25% 900 0.065 -55 to +125
BLM03PG330SN1 33 ±25% 750 0.090 -55 to +125
■ Impedance - Frequency (Typical)
BLM03P Series
Impedance (Ω)
1 10 100 1000
Frequency (MHz)
0
10
40
50
60
70
20
30
80
BLM03PG330SN1
BLM03PG220SN1
■ Features (BLM_P Series)
The chip ferrite beads BLM series is designed to
function nearly as a resistor at noise frequencies,
which greatly reduces the possibility of resonance and
leaves signal wave forms undistorted.
BLM series is effective in circuits without stable
ground lines because BLM series does not need a
connection to ground.
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_P series can be used in high current circuits
due to its low DC resistance. It can match power lines
to a maximum of 6A DC.
The small size of BLM03A series (0.6x0.3mm) is
suitable for noise suppression in small equipment such
as PA modules for cellular phones.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
56
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency Characteristics
BLM03PG220SN1
Z
R
X
Impedance (Ω)
1 10 100 1000
Frequency (MHz)
0
10
40
50
60
70
20
30
80
BLM03PG330SN1
Z
R
X
Impedance (Ω)
1 10 100 1000
Frequency (MHz)
0
10
40
50
60
70
20
30
80
BLM15P Series (0402 Size)
(in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15P Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15PG100SN1 10 (Typ.) 1000 0.05 -55 to +125
BLM15PD300SN1 30 ±25% 2200 0.035 -55 to +125
BLM15PD600SN1 60 ±25% 1700 0.06 -55 to +125
BLM15PD800SN1 80 ±25% 1500 0.07 -55 to +125
BLM15PD121SN1 120 ±25% 1300 0.09 -55 to +125
In operating temperature exceeding +85°C, derating of current is necessary for BLM15PD series.
Please refer to p.57, "Derating of Rated Current".
■ Impedance - Frequency (Typical)
BLM15P Series
Frequency (MHz)
Impedance (Ω)
0
50
100
150
200
250
110 100 1000
BLM15PG100SN1
BLM15PD300SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
57
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency Characteristics
BLM15PG100SN1
0
5
10
15
20
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM15PD300SN1
Frequency (MHz)
Impedance (Ω)
0
15
30
45
60
1 10 100 1000
Z
R
X
BLM15PD600SN1
Frequency (MHz)
Impedance (Ω)
0
30
60
90
120
1 10 100 1000
Z
R
X
BLM15PD800SN1
Frequency (MHz)
Impedance (Ω)
0
40
80
120
160
1 10 100 1000
Z
R
X
BLM15PD121SN1
Frequency (MHz)
Impedance (Ω)
0
60
120
180
240
1 10 100 1000
Z
R
X
■ Notice (Rating)
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15PD series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating
Derated Current (A)
Operating Temperature (°C)
125
85
1.3
1.7
2.2
1.4
1.1
0.9
3.0
2.5
2.0
1.5
1.0
0.5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
58
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18P Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)
BLM18P Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18PG300SN1 30 (Typ.) 1000 0.05 -55 to +125
BLM18PG330SN1 33 ±25% 3000 0.025 -55 to +125
BLM18PG600SN1 60 (Typ.) 500 0.10 -55 to +125
BLM18PG121SN1 120 ±25% 2000 0.05 -55 to +125
BLM18PG181SN1 180 ±25% 1500 0.09 -55 to +125
BLM18PG221SN1 220 ±25% 1400 0.10 -55 to +125
BLM18PG331SN1 330 ±25% 1200 0.15 -55 to +125
BLM18PG471SN1 470 ±25% 1000 0.20 -55 to +125
■ Impedance - Frequency (Typical)
BLM18P Series
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM18PG331SN1
BLM18PG221SN1
BLM18PG181SN1
BLM18PG121SN1
BLM18PG600SN1
BLM18PG330SN1
BLM18PG300SN1
BLM18PG471SN1
■ Impedance - Frequency Characteristics
BLM18PG300SN1
0
10
20
30
40
50
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18PG330SN1
1 10 100 1000
Frequency (MHz)
60
45
30
15
0
Impedance (Ω)
Z
R
X
Continued on the following page.
For the items of rated current higher than 1200mA, derating is required.
Please refer to p.68, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
59
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18PG600SN1
0
20
40
60
80
100
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18PG121SN1
1 10 100 1000
Frequency (MHz)
200
150
100
50
0
Impedance (Ω)
Z
R
X
BLM18PG181SN1
1 10 100 1000
Frequency (MHz)
280
210
140
70
0
Impedance (Ω)
Z
R
X
BLM18PG221SN1
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18PG331SN1
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18PG471SN1
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
60
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM21P Series (0805 Size)
2.0±0.2
0.5±0.2
1.25±0.2
EIA CODE : 0805 (in mm)
0.85±0.2
BLM21P Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM21PG220SN1 22 ±25% 6000 0.01 -55 to +125
BLM21PG300SN1 30 (Typ.) 3000 0.015 -55 to +125
BLM21PG600SN1 60 ±25% 3000 0.025 -55 to +125
BLM21PG221SN1 220 ±25% 2000 0.050 -55 to +125
BLM21PG331SN1 330 ±25% 1500 0.09 -55 to +125
■ Impedance - Frequency (Typical)
BLM21P Series
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM21PG220SN1
BLM21PG600SN1
BLM21PG300SN1
BLM21PG221SN1
BLM21PG331SN1
■ Impedance - Frequency Characteristics
BLM21PG220SN1
30
20
10
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
40 BLM21PG300SN1
45
30
15
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
60
Continued on the following page.
For the items of rated current higher than 1500mA, derating is required.
Please refer to p.68, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
61
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM21PG600SN1
90
60
30
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
120
BLM21PG221SN1
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
400
BLM21PG331SN1
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM31P Series (1206 Size)
1.1±0.2
3.2±0.2 1.6±0.2
0.7±0.3
in mm
BLM31P Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM31PG330SN1 33 ±25% 6000 0.01 -55 to +125
BLM31PG500SN1 50 (Typ.) 3000 0.025 -55 to +125
BLM31PG121SN1 120 ±25% 3000 0.025 -55 to +125
BLM31PG391SN1 390 ±25% 2000 0.05 -55 to +125
BLM31PG601SN1 600 ±25% 1500 0.09 -55 to +125
For the items of rated current higher than 1500mA, derating is required.
Please refer to p.68, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
62
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency (Typical)
BLM31P Series
0
100
200
300
400
500
600
700
Impedance (Ω)
1 10 100 1000
Frequency (MHz)
BLM31PG391SN1
BLM31PG500SN1
BLM31PG330SN1
BLM31PG121SN1
BLM31PG601SN1
■ Impedance - Frequency Characteristics
BLM31PG330SN1
45
30
15
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
60
BLM31PG500SN1
60
40
20
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
80
BLM31PG121SN1
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
200
BLM31PG391SN1
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM31PG601SN1
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
63
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM41P Series (1806 Size)
0.7±0.3
4.5±0.2 1.6±0.2
1.6±0.2
(in mm)
BLM41P Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM41PG600SN1 60 (Typ.) 6000 0.01 -55 to +125
BLM41PG750SN1 75 (Typ.) 3000 0.025 -55 to +125
BLM41PG181SN1 180 ±25% 3000 0.025 -55 to +125
BLM41PG471SN1 470 ±25% 2000 0.05 -55 to +125
BLM41PG102SN1 1000 ±25% 1500 0.09 -55 to +125
■ Impedance - Frequency (Typical)
BLM41P Series (60-180ohm)
0
50
100
150
200
250
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM41PG181SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41P Series (470-1000ohm)
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLM41PG102SN1
BLM41PG471SN1
■ Impedance - Frequency Characteristics
BLM41PG600SN1
100
75
50
25
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM41PG750SN1
100
75
50
25
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
For the items of rated current higher than 1500mA, derating is required.
Please refer to p.68, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
64
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM41PG181SN1
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM41PG471SN1
600
450
300
150
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM41PG102SN1
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM18K Series (0603 Size)
■ Features
The chip ferrite beads BLM series is designed to
function nearly as a resistor at noise frequencies,
which greatly reduces the possibility of resonance and
leaves signal wave forms undistorted.
BLM series is effective in circuits without stable
ground lines because BLM series does not need a
connection to ground.
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_K series can be used in high current circuits
due to its low DC resistance. It can match power lines
to a maximum of 6A DC.
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)
BLM18KG Series
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
65
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18KG260TN1 26 ±25% 6000 0.007 -55 to +125
BLM18KG700TN1 70 ±25% 3500 0.022 -55 to +125
BLM18KG121TN1 120 ±25% 3000 0.030 -55 to +125
BLM18KG221SN1 220 ±25% 2200 0.050 -55 to +125
BLM18KG331SN1 330 ±25% 1700 0.080 -55 to +125
BLM18KG471SN1 470 ±25% 1500 0.130 -55 to +125
BLM18KG601SN1 600 ±25% 1300 0.150 -55 to +125
■ Impedance - Frequency (Typical)
BLM18K Series
0
700
600
500
400
300
200
100
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
BLM18KG221SN1
BLM18KG121TN1
BLM18KG700TN1
BLM18KG260TN1
BLM18KG331SN1
BLM18KG471SN1
BLM18KG601SN1
■ Impedance - Frequency Characteristics
BLM18KG260TN1
0
40
30
20
10
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
BLM18KG700TN1
0
100
75
50
25
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
BLM18KG121TN1
0
200
150
100
50
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
BLM18KG221SN1
0
400
300
200
100
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
Continued on the following page.
For the items of rated current higher than 1200mA,derating is required.
Please refer to p.66,"Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
66
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18KG331SN1
0
600
450
300
150
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
BLM18KG471SN1
0
800
600
400
200
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
BLM18KG601SN1
0
800
600
400
200
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
■ Notice (Rating)
In operating temperatures exceeding +85D, derating of
current is necessary for chip Ferrite Beads for which rated
current is 1300mA or over. Please apply the derating curve
shown in chart according to the operating temperature.
Derating
Operating Temperature [D]
Derated Current [A]
85 125
0.0
1.0
1.3
1.5
1.7
2.0
2.2
3.0
3.5
4.0
5.0
6.0
7.0
BLM18KG260TN1
BLM18KG121TN1
BLM18KG221SN1
BLM18KG700TN1
BLM18KG471SN1
BLM18KG601SN1
BLM18KG331SN1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
67
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18S Series (0603 Size)
■ Features
1. Low DC Resistance/Large Rated Current
2. BLM18S series can be used in high current circuits
due to its low DC resistance.
It can match power lines to a maximum of 6A DC.
3. Ni+Sn plating structure of the extenal electrodes
provides excellent solder heat resistance.
■ Applications
EMI suppression for DC power line (in mm)
1.6±0.15 0.8±0.15
0.4±0.2
0.5±0.15
BLM18S Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18SG260TN1 26 ±25% 6000 0.007 -55 to +125
BLM18SG700TN1 70 ±25% 4000 0.020 -55 to +125
BLM18SG121TN1 120 ±25% 3000 0.025 -55 to +125
BLM18SG221TN1 220 ±25% 2500 0.040 -55 to +125
BLM18SG331TN1 330 ±25% 1500 0.070 -55 to +125
For the items of rated current higher than 1500mA, derating is required.
Please refer to p.68, "Derating of Rated Current".
■ Impedance - Frequency (Typical)
BLM18S Series
0
100
200
300
400
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
BLM18SG331TN1
BLM18SG121TN1
BLM18SG700TN1
BLM18SG260TN1
BLM18SG221TN1
■ Impedance - Frequency Characteristics
BLM18SG260TN1
0
10
20
30
40
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLM18SG700TN1
0
50
100
1 10 100 1000
Frequency (MHz)
Z
R
X
2000
Impedance (Ω)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
68
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18SG121TN1
0
100
200
1 10 100 1000
Frequency (MHz)
Z
R
X
2000
Impedance (Ω)
BLM18SG221TN1
0
100
200
300
1 10 100 1000
Frequency (MHz)
Z
R
X
2000
Impedance (Ω)
BLM18SG331TN1
0
100
200
300
400
1 10 100 1000
Frequency (MHz)
Z
R
X
2000
Impedance (Ω)
■ Notice (Rating)
In operating temperatures exceeding +85D, derating of
current is necessary for chip Ferrite Beads for which rated
current is 1200mA or over. Please apply the derating curve
shown in chart according to the operating temperature.
Derating
Operating Temperature [D]
Derated Current [A]
85 125
0
1
2
3
4
5
66A
3A
1.5A
2A
2.5A
4A
1.2A
1A
1.4A
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
69
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
GHz Noise Suppression Chip Ferrite Beads BLM15H/15E/18H/18E Series
Excellent high frequency impedance characteristics
with 0402 (EIA) size.
■ Features (BLM15HG/HD/EG Series)
1. Small size: 1.0x0.5mm (0402)
2. Suitable for noise suppression in 1GHz or higher
frequency
3. Low DC Resistance/Large Rated Current (BLM15E)
4. No Lead production using Ni+Sn plating in
termination
■ Applications
1. EMI suppression for Note PC and DSC
2. Noise suppression for data line in mobile phone
3. Prevention of erroneous operation caused by local
oscillation signal in mobile phone
4. Optical pickup modules
■ Features (BLM15HB Series)
1. Small size: 1.0x0.5mm
2. Suitable for noise suppression in 1GHz or
higher frequency
3. No Lead production using Ni+Sn plating in
termination
■ Applications
1. EMI suppression for Note PC and DSC
2. Noise suppression for data line in mobile phone
3. Noise suppression for USB interface line in
mobile phone
4. Prevention of erroneous operation caused
by local oscillation signal in mobile phone
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM15H Series (0402 Size)
(in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15H Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15HG601SN1 600 ±25% 1000 ±40% 300 0.7 -55 to +125
BLM15HG102SN1 1000 ±25% 1400 ±40% 250 1.1 -55 to +125
BLM15HB121SN1 120 ±25% 500 ±40% 300 0.7 -55 to +125
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
70
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
Continued from the preceding page.
BLM15HB221SN1 220 ±25% 900 ±40% 250 1.0 -55 to +125
BLM15HD601SN1 600 ±25% 1400 ±40% 300 0.85 -55 to +125
BLM15HD102SN1 1000 ±25% 2000 ±40% 250 1.25 -55 to +125
BLM15HD182SN1 1800 ±25% 2700 ±40% 200 2.2 -55 to +125
■ Impedance - Frequency (Typical)
BLM15HG Series
0
300
600
900
1200
1500
1800
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
BLM15HG601SN1
BLM15HG102SN1
BLM15HB Series
0
200
400
600
800
1000
1200
1 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM15HB221SN1
BLM15HB121SN1
BLM15HD Series
0
4000
3000
2000
1000
Frequency (MHz)
Impedance (Ω)
BLM15HD601SN1
BLM15HD102SN1
BLM15HD182SN1
1 10 100 1000 3000
■ Impedance - Frequency Characteristics
BLM15HG601SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
300
600
900
1200
R
X
Z
BLM15HG102SN1
Frequency (MHz)
Impedance (Ω)
0
300
600
900
1200
1500
1800
R
X
Z
1 10 100 1000 3000
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
71
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM15HB121SN1
Z
R
X
0
200
400
600
800
1 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM15HB221SN1
Z
R
X
1200
800
400
01 10 100 30001000
Frequency (MHz)
Impedance (Ω)
BLM15HD601SN1
Frequency (MHz)
Impedance (Ω)
0
400
800
1200
1600
2000
R
X
Z
1 10 100 1000 3000
BLM15HD102SN1
Frequency (MHz)
Impedance (Ω)
0
500
1000
1500
2000
2500
R
X
Z
1 10 100 1000 3000
BLM15HD182SN1
ZR
X
Frequency (MHz)
Impedance (Ω)
0
4000
3000
2000
1000
1 10 100 1000 3000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
72
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM15E Series (0402 Size)
(in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15E Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15EG121SN1 120 ±25% 145 (Typ.) 1500 0.095 -55 to +125
BLM15EG221SN1 220 ±25% 270 (Typ.) 700 0.28 -55 to +125
■ Impedance - Frequency (Typical)
BLM15EG Series
0
100
200
300
400
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
BLM15EG221SN1
BLM15EG121SN1
■ Impedance - Frequency Characteristics
BLM15EG121SN1
0
50
100
150
200
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
BLM15EG221SN1
0
100
200
300
400
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
Continued on the following page.
In operating temperature exceeding +85°C, derating of current is necessary for BLM15E series.
Please refer to p.73, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
73
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Notice (Rating)
Derating
In operating temperature exceeding +85°C, derating of
current is necessary for BLM15E series.
Please apply the derating curve shown in chart according to
the operating temperature. 2.1
1.8
1.5
1.2
0.9
0.6
Derated Current (A)
Operating Temperature (D)
45 85 125
BLM15EG121SN1
0.9
0.7
0.5
0.3
Derated Current (A)
Operating Temperature (D)
45 85 125
BLM15EG221SN1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
74
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18H/BLM18E series has a modified internal electrode
structure, that minimizes stray capacitance and
increases the effective frequency range.
■ Features (BLM18H series)
1. BLM18H series realizes high impedance at 1GHz and
is suitable for noise suppression from 500MHz to
GHz range. The impedance value of HG/HD-type is
about three times as large as that of A/B-type at
1GHz, though the impedance characteristic of
HG/HD-type is similar to A/B-type at 100MHz or less.
2. HG-type is effective in noise suppression in wide
frequency range (several MHz to several GHz).
HB/HD-type for high-speed signal line provides a
sharper roll-off after the cut-off frequency.
HK-type for digital interface and HE-type for
optical pickup modules are effective in suppressing
the ringing because resistance especially grows in
the lower frequency.
3. The magnetic shielded structure minimizes crosstalk.
■ Features (BLM18E series)
1. Low DC Resistance and a large Rated Current are
suitable for noise suppression of the driver
circuit.
2. Excellent direct current characteristics
3. Thin type (t=0.5mm) is suitable for small and low
profile equipment such as DSC, cellular phones.
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM18H Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)
BLM18H Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18HG471SN1 470 ±25% 600 (Typ.) 200 0.85 -55 to +125
BLM18HG601SN1 600 ±25% 700 (Typ.) 200 1.00 -55 to +125
BLM18HG102SN1 1000 ±25% 1000 (Typ.) 100 1.60 -55 to +125
BLM18HB121SN1 120 ±25% 500 ±40% 200 0.50 -55 to +125
BLM18HB221SN1 220 ±25% 1100 ±40% 100 0.80 -55 to +125
BLM18HB331SN1 330 ±25% 1600 ±40% 50 1.20 -55 to +125
BLM18HD471SN1 470 ±25% 1000 (Typ.) 100 1.20 -55 to +125
BLM18HD601SN1 600 ±25% 1200 (Typ.) 100 1.50 -55 to +125
BLM18HD102SN1 1000 ±25% 1700 (Typ.) 50 1.80 -55 to +125
BLM18HE601SN1 600 ±25% 600 (Typ.) 800 0.25 -55 to +125
BLM18HE102SN1 1000 ±25% 1000 (Typ.) 600 0.35 -55 to +125
BLM18HE152SN1 1500 ±25% 1500 (Typ.) 500 0.50 -55 to +125
BLM18HK331SN1 330 ±25% 400 ±40% 200 0.50 -55 to +125
BLM18HK471SN1 470 ±25% 600 ±40% 200 0.70 -55 to +125
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
75
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
Continued from the preceding page.
BLM18HK601SN1 600 ±25% 700 ±40% 100 0.90 -55 to +125
BLM18HK102SN1 1000 ±25% 1200 ±40% 50 1.50 -55 to +125
■ Impedance - Frequency (Typical)
BLM18HG Series
Frequency (MHz)
2000
1500
1000
500
01 10 100 1000 2000
BLM18HG102SN1
BLM18HG471SN1
BLM18HG601SN1
Impedance (Ω)
BLM18HB Series
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
1600
1200
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18HD Series
01 10 100 1000 2000
4000
3000
2000
1000
BLM18HD601SN1
BLM18HD471SN1
BLM18HD102SN1
Frequency (MHz)
Impedance (Ω)
BLM18HE Series
0
500
1000
1500
2000
2500
Impedance (Ω)
1 10 100 30001000
Frequency (MHz)
BLM18HE152SN1
BLM18HE601SN1
BLM18HE102SN1
BLM18HK Series
01 10 100 1000 2000
1600
1200
800
400
Frequency (MHz)
BLM18HK102SN1
BLM18HK601SN1
BLM18HK331SN1
BLM18HK471SN1
Impedance (Ω)
In operating temperature exceeding +85°C, derating of current is necessary for BLM18HE series.
Please refer to p.78, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
76
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency Characteristics
BLM18HG471SN1
R
X
01 10 100 1000 2000
800
600
400
200
Frequency (MHz)
Impedance (Ω)
Z
BLM18HG601SN1
R
X
01 10 100 1000 2000
1000
750
500
250
Frequency (MHz)
Impedance (Ω)
Z
BLM18HG102SN1
R
X
01 10 100 1000 2000
2000
1500
1000
500
Frequency (MHz)
Impedance (Ω)
Z
BLM18HB121SN1
Z
R
X
700
600
500
400
300
200
100
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18HB221SN1
ZR
X
1000
750
500
250
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18HB331SN1
ZR
X
1600
1200
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18HD471SN1
R
X
01 10 100 1000 2000
2000
1500
1000
500
Frequency (MHz)
Impedance (Ω)
Z
BLM18HD601SN1
R
X
01 10 100 1000 2000
2000
1500
1000
500
Frequency (MHz)
Impedance (Ω)
Z
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
77
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLM18HD102SN1
R
X
01 10 100 1000 2000
4000
3000
2000
1000
Frequency (MHz)
Impedance (Ω)
Z
BLM18HE601SN1
0
200
400
600
800
1000
Impedance (Ω)
1 10 100 30001000
Frequency (MHz)
Z
R
X
BLM18HE102SN1
0
500
1000
1500
2000
Impedance (Ω)
1 10 100 30001000
Frequency (MHz)
Z
R
X
BLM18HE152SN1
0
500
1000
1500
2000
2500
Impedance (Ω)
1 10 100 30001000
Frequency (MHz)
Z
R
X
BLM18HK331SN1
X
R
Z
01 10 100 1000 2000
600
450
300
150
Frequency (MHz)
Impedance (Ω)
BLM18HK471SN1
X
R
Z
01 10 100 1000 2000
800
600
400
200
Frequency (MHz)
Impedance (Ω)
BLM18HK601SN1
X
R
Z
01 10 100 1000 2000
1000
750
500
250
Frequency (MHz)
Impedance (Ω)
BLM18HK102SN1
X
R
Z
01 10 100 1000 2000
1600
1200
800
400
Frequency (MHz)
Impedance (Ω)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
78
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Notice (Rating)
In operating temperature exceeding +85°C, derating of
current is necessary for BLM18HE series.
Please apply the derating curve shown in chart according to
the operating temperature.
Derating
Derated Current (mA)
Operating Temperature (°C)
125
85
400
BLM18HE152SN1
BLM18HE102SN1
BLM18HE601SN1
500
600
800
BLM18E Series (0603 Size)
BLM18EGpppTN1
BLM18EGpppSN1
0.5±0.15
0.8±0.15
(in mm)
T
1.6±0.15 0.8±0.15
0.4±0.2
T
BLM18E Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18EG101TN1 100 ±25% 140 (Typ.) 2000 0.045 -55 to +125
BLM18EG121SN1 120 ±25% 145 (Typ.) 2000 0.04 -55 to +125
BLM18EG221SN1 220 ±25% 260 (Typ.) 2000 0.05 -55 to +125
BLM18EG221TN1 220 ±25% 300 (Typ.) 1000 0.15 -55 to +125
BLM18EG331TN1 330 ±25% 450 (Typ.) 500 0.21 -55 to +125
BLM18EG391TN1 390 ±25% 520 (Typ.) 500 0.3 -55 to +125
BLM18EG471SN1 470 ±25% 550 (Typ.) 500 0.21 -55 to +125
BLM18EG601SN1 600 ±25% 700 (Typ.) 500 0.35 -55 to +125
■ Impedance - Frequency (Typical)
BLM18EG_TN Series
BLM18EG391TN1
BLM18EG331TN1
BLM18EG221TN1
BLM18EG101TN1
1000
800
600
200
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLM18EG_SN Series
BLM18EG601SN1
BLM18EG221SN1
BLM18EG121SN1
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
1000
800
600
200
400
BLM18EG471SN1
For the items of rated current higher than 2000mA, derating is required.
Please refer to p.80, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
79
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency Characteristics
BLM18EG101TN1
0
40
80
120
160
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLM18EG121SN1
0
40
80
120
160
200
1 10 100 20001000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18EG221SN1
0
100
200
300
400
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLM18EG221TN1
0
100
200
300
400
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLM18EG331TN1
0
150
300
450
600
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
Z
R
X
BLM18EG391TN1
0
140
280
420
560
700
1 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLM18EG471SN1
0
200
400
600
800
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLM18EG601SN1
0
250
500
750
1000
1 10 100 20001000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
80
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Notice (Rating)
In operating temperatures exceeding +85D, derating of
current is necessary for chip Ferrite Beads for which rated
current is 1200mA or over. Please apply the derating curve
shown in chart according to the operating temperature.
Derating
Operating Temperature [D]
Derated Current [A]
85 125
0
1
2
3
4
5
66A
3A
1.5A
2A
2.5A
4A
1.2A
1A
1.4A
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
81
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip ferrite beads for high frequency noise
suppression over a wide frequency range.
■ Features
1. High impedance characteristic in 1GHz or higher
frequency
2. High impedance characteristic over a wide frequency
band range of 100MHz to 6GHz
3. Small decrease in impedance during current loading,
resulting in small impedance fluctuation during
equipment operation.
4. Reflow soldering only
■ Applications
1. Noise suppression for PCs with high-speed CPU and
high-speed bus, and for interface lines of
peripheral equipment.
2. High harmonic noise suppression for digital
equipment with several hundred MHz or higher clock
speeds.
3. Prevention of erroneous operation caused by local
oscillation signals in mobile phone and W-LAN
module (ensuring self-immunity).
4. Bias Tee modules in optical transceivers
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
BLM15G Series (0402 Size)
(in mm)
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
BLM15G Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM15GG221SN1 220 ±25% 600 ±40% 300 0.7 -55 to +125
BLM15GG471SN1 470 ±25% 1200 ±40% 200 1.3 -55 to +125
BLM15GA750SN1 75 ±25% 1000 ±40% 200 1.3 -55 to +125
High-GHz Noise Suppression Chip Ferrite Beads BLM15G/18G Series
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
82
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency (Typical)
BLM15G Series
0
500
1000
1500
2000
2500
1 10 100 1000 3000
Impedance (Ω)
Frequency (MHz)
BLM15GG471SN1
BLM15GG221SN1
BLM15GA750SN1
■ Impedance - Frequency Characteristics
BLM15GG221SN1
0
300
600
900
1200
1500
1 10 100 1000
Z
R
X
3000
Impedance (Ω)
Frequency (MHz)
BLM15GG471SN1
0
250
500
750
1000
1250
1500
1 10 100 1000
Z
R
X
3000
Frequency (MHz)
Impedance (Ω)
BLM15GA750SN1
0
500
1000
1500
2000
2500
1 10 100 1000 3000
Z
R
X
Frequency (MHz)
Impedance (Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
83
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLM18G Series (0603 Size)
0.35±0.15
1.6±0.1
0.8±0.1
0.8±0.1
(in mm)
BLM18G Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Impedance
(at 1GHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLM18GG471SN1 470 ±25% 1800 ±30% 200 1.30 -55 to +125
■ Impedance - Frequency (Typical)
BLM18GG Series
0
500
1000
1500
2000
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
BLM18GG471SN1
■ Impedance - Frequency Characteristics
BLM18GG471SN1
0
500
1000
1500
2000
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Noise Suppression in UHF Range
Type of Filter
Initial
(No filter)
Conventional Type
BLM18AG102SN1
(1000Ω at 100MHz)
EMI Suppression Effect Description
Current BLM are effective in suppressing
noise in the range between 300MHz and
700MHz.
In addition to the effectiveness of current
BLM, BLM18HG suppresses noise in the
range beyond 700MHz.
Testing Circuit
for GHz Noise Suppression
BLM18HG102SN1
(1000Ω at 100MHz)
10
20
30
40
50
60
70
300 400 500 600 700 800 900 1000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Level (dBµV/m)Level (dBµV/m)Level (dBµV/m)
10
20
30
40
50
60
70
300 400 500 600 700 800 900 1000
Initial
10
20
30
40
50
60
70
300 400 500 600 700 800 900 1000
Initial
BLM18AG102SN1
Comparison between BLM18HG102SN1 and
BLM18AG102SN1 (Current Item) 2000
1500
1000
500
0101 100 1000 2000
BLM18HG102SN1
BLM18AG102SN1
Frequency (MHz)
74HC0074AC0474HCU04
10MHz
Measured radiation at 3m distance
BLM
Impedance (Ω)
EMI Suppression Effect
Noise Suppression Effect
84
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
85
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Beads Arrays BLA2AA/2AB/31A/31B Series
BLA2AA/BLA2AB Series
■ Features
1. BLA2AA/2AB series has 4 circuits in 2.0x1.0mm body
with 0.5mm pitch.
2. Provides attenuation across a broad frequency range.
Two types of impedance characteristics are
available, one is for general signal line and the
other is for high speed signal line.
3. Original inner electrode structure enables extra
low crosstalk.
4. The nickel barrier structure of the external
electrodes provides excellent solder heat
resistance.
■ Applications
Notebook size PCs, PDAs and other compact size digital
equipment
: Electrode
(1) (2) (3) (4)
(5) (6) (7) (8)
2.0±0.2
0.25±0.15 0.5±0.1
0.2±0.15
1.0±0.2
0.5±0.1
(in mm)
BLA2AA/BLA2AB Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLA2AAG121SN4 120 ±25% 100 0.50 -55 to +125
BLA2AAG221SN4 220 ±25% 50 0.70 -55 to +125
BLA2AAG601SN4 600 ±25% 50 1.10 -55 to +125
BLA2AAG102SN4 1000 ±25% 50 1.30 -55 to +125
BLA2ABB100SN4 10 ±25% 200 0.1 -55 to +125
BLA2ABB220SN4 22 ±25% 200 0.2 -55 to +125
BLA2ABB470SN4 47 ±25% 200 0.35 -55 to +125
BLA2ABB121SN4 120 ±25% 50 0.60 -55 to +125
BLA2ABB221SN4 220 ±25% 50 0.90 -55 to +125
BLA2ABD750SN4 75 ±25% 200 0.20 -55 to +125
BLA2ABD121SN4 120 ±25% 200 0.35 -55 to +125
BLA2ABD221SN4 220 ±25% 100 0.40 -55 to +125
BLA2ABD471SN4 470 ±25% 100 0.65 -55 to +125
BLA2ABD601SN4 600 ±25% 100 0.80 -55 to +125
BLA2ABD102SN4 1000 ±25% 50 1.00 -55 to +125
Number of Circuits: 4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
86
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
■ Impedance - Frequency (Typical)
BLA2AAG Series
BLA2AAG102SN4
BLA2AAG601SN4
BLA2AAG221SN4
BLA2AAG121SN4
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLA2ABB Series
0
200
400
600
800
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLA2ABB121SN4
BLA2ABB221SN4
BLA2ABB220SN4
BLA2ABB100SN4
BLA2ABB470SN4
BLA2ABD Series
1600
1200
800
400
01 10 100 1000 2000
Frequency (MHz)
Impedance (Ω)
BLA2ABD102SN4
BLA2ABD601SN4
BLA2ABD471SN4
BLA2ABD221SN4
BLA2ABD121SN4
BLA2ABD750SN4
■ Impedance - Frequency Characteristics
BLA2AAG121SN4
Z
R
X
200
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLA2AAG221SN4
Z
R
X
400
300
200
100
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLA2AAG601SN4
Z
R
X
800
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
BLA2AAG102SN4
Z
R
X
1200
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
87
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLA2ABB100SN4
0
10
20
30
40
50
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLA2ABB220SN4
0
25
50
75
100
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLA2ABB470SN4
0
100
200
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
ZR
X
BLA2ABB121SN4
100
200
300
400
500
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
0
R
X
BLA2ABB221SN4
0
200
400
600
800
1000
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLA2ABD750SN4
0
50
100
150
200
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLA2ABD121SN4
0
75
150
225
300
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
BLA2ABD221SN4
0
150
300
450
600
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
2000
Z
R
X
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
88
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLA2ABD471SN4
0
200
400
600
800
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
BLA2ABD601SN4
0
200
400
600
800
1000
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
X
R
BLA2ABD102SN4
0
400
800
1200
1600
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
X
R
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
89
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
BLA31A/BLA31B Series
The miniaturization of electronic equipment requires
high performance EMI filters which enable high density
mounting. BLA31A/B series consists of 4 circuits of
ferrite beads.
BLA31A/B is suitable for EMI suppression in smaller
digital equipment.
■ Features
1. BLA31A/B has 4 circuits in 3.2x1.6mm body with
0.8mm pitch.
2. Provides attenuation across a broad frequency range.
Two types of impedance are available which meet
general signal line and high speed signal line.
3. Original inner electrode structure enables extra
low crosstalk.
4. The nickel barrier structure of the external
electrodes provides excellent solder heat
resistance. Both flow and reflow soldering methods
can be employed.
0.8±0.1
0.4±0.2
3.2±0.2
1.6±0.2
0.8±0.2 0.3±0.2
(in mm)
(1) (2) (3) (4)
(5) (6) (7) (8)
BLA31A/BLA31B Series
Part Number Impedance
(at 100MHz/20°C)
(ohm)
Rated Current
(mA) DC Resistance (max.)
(ohm)
Operating
Temperature Range
(°C)
BLA31AG300SN4 30 ±25% 200 0.10 -55 to +125
BLA31AG600SN4 60 ±25% 200 0.15 -55 to +125
BLA31AG121SN4 120 ±25% 150 0.20 -55 to +125
BLA31AG221SN4 220 ±25% 150 0.25 -55 to +125
BLA31AG601SN4 600 ±25% 100 0.35 -55 to +125
BLA31AG102SN4 1000 ±25% 50 0.45 -55 to +125
BLA31BD121SN4 120 ±25% 150 0.30 -55 to +125
BLA31BD221SN4 220 ±25% 150 0.35 -55 to +125
BLA31BD471SN4 470 ±25% 100 0.40 -55 to +125
BLA31BD601SN4 600 ±25% 100 0.45 -55 to +125
BLA31BD102SN4 1000 ±25% 50 0.55 -55 to +125
Number of Circuits: 4
■ Equivalent Circuit
No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
90
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance - Frequency (Typical)
BLA31A Series
1200
900
600
300
01 10 100 1000
Frequency (MHz)
BLA31AG601SN4
BLA31AG102SN4 BLA31AG600SN4
BLA31AG300SN4
BLA31AG221SN4
BLA31AG121SN4
Impedance (
Ω
)
BLA31B Series
2000
1500
1000
500
01 10 100 1000
BLA31BD601SN4
BLA31BD102SN4
BLA31BD471SN4
BLA31BD221SN4
BLA31BD121SN4
Frequency (MHz)
Impedance (
Ω
)
■ Impedance - Frequency Characteristics
BLA31AG300SN4
30
20
10
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
40 BLA31AG600SN4
60
40
20
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
80
BLA31AG121SN4
150
100
50
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
200 BLA31AG221SN4
225
150
75
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
300
BLA31AG601SN4
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
800
BLA31AG102SN4
900
600
300
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1200
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
91
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BLA31BD121SN4
225
150
75
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
300
BLA31BD221SN4
375
250
125
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
500
BLA31BD471SN4
600
400
200
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
800
BLA31BD601SN4
750
500
250
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1000
BLA31BD102SN4
1500
1000
500
01 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
2000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
92
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr Part Numbering
(Part Number)
Chip EMIFILr Capacitor Type/Capacitor Array Type
eDimensions (LgW)
Code
1.6g0.8mm
2.0g1.25mm
3.2g1.25mm
3.2g1.6mm
4.5g1.6mm
5.7g5.0mm
Dimensions (LgW)
0603
0805
1205
1206
1806
2220
EIA
18
21
3D
31
41
55
qProduct ID
NF Chip EMIFILr
Product ID
wStructure
M
A
Capacitor Type
Capacitor Array Type
Code Structure
rFeatures
Code
Capacitor Type for Signal Lines
Capacitor Type for Large Current
High Loss Type for Large Current
Features
CC
PC
PS
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
yCharacteristics
B
F
R
U
S
±10%
+30/-80%
±15%
-750 ±120ppm/°C
+350 to -1000ppm/°C
Code
Capacitance Change (Temperature Characteristics)
oPackaging
L
B
D
NFM3D/NFM41/NFM55
All series
NFM18/NFM21/NFAppCC
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø180mm Reel)
Code Packaging Series
3
4
Sn Plating
Solder Coating
Code Electrode
NFM (Except NFM55)
NFM55
Series
uRated Voltage
0J
1A
1C
1E
1H
2A
6.3V
10V
16V
25V
50V
100V
Code Rated Voltage
iElectrode/Others (NFM Series)
44 Circuits
Code Number of Circuits
iNumber of Circuits (NFAppCC Series)
t
102
q
NF
y
R
r
CC
e
3D
w
M
u
1H
i
3
o
L
93
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(Part Number)
Chip EMIFILr LC Combined Type
eDimensions (LgW)
Code
1.6g0.8mm
2.0g1.25mm
3.2g1.6mm
6.8g1.6mm
Dimensions (LgW)
0603
0805
1206
2606
EIA
18
21
31
61
qProduct ID
NF Chip EMIFILr
Product ID
wStructure
L
W
E
Monolithic, LC Combined Type
Winding, LC Combined Type
Block, LC Combined Type
Code Structure
yCharacteristics (NFL/NFW Series)
XCut-off Frequency
Code Characteristics
oPackaging
K
L
B
D
NFW31/NFE
NFW31/NFE
NFL18/NFL21/NFE
NFL18/NFL21
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø180mm Reel)
Code Packaging Series
3/7
4
9
Sn Plating
Lead Free Solder Coating
Others
Code Electrode
NFL
NFW
NFE
Series
uRated Voltage
1A
1C
1E
1H
2A
10V
16V
25V
50V
100V
Code Rated Voltage
tCut-off Frequency (NFL/NFW Series)
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
rFeatures
Code
π Circuit for Signal Lines
T Circuit for Signal Lines
T Circuit for Large Current
Features
SP
ST
PT
iElectrode
yCharacteristics (NFE Series)
B
C
D
E
F
R
U
Z
±10%
±20%, ±22%
+20/-30%, +22/-33%
+20/-55%, +22/-56%
+30/-80%, +22/-82%
±15%
-750 ±120ppm/ ˚C
Other
Code
Capacitance Change (Temperature Characteristics)
tCapacitance (NFE Series)
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
t
107
q
NF
y
X
r
ST
e
18 3
i o
L
w
L
u
1C
94
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(Part Number)
Chip EMIFILr LC Combined Array Type (NFA18S/21S Series)
eDimensions (LgW)
Code
1.6g0.8mm
2.0g1.25mm
Dimensions (LgW)
0603
0805
EIA
18
21
qProduct ID
NF Chip EMIFILr
Product ID
wStructure
AArray Type
Code Structure
rFeatures
Code
L Circuit for Signal Lines
Features
SL
tCut-off Frequency
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
yFeatures
X
VExpressed by a letter
Code
Features
oDimensions (T)
5
8
Low Profile
Standard
Code Dimensions (T)
!0Packaging
B
L
Bulk
Embossed Taping (ø180mm Reel)
Code Packaging
44 Circuits
Code Number of Circuits
uRated Voltage
1A 10V
Code Rated Voltage
iNumber of Circuits
t
207
q
NF
y
X
r
SL
e
21
w
A
u
1A
i
4
o
5
!0
L
(Part Number)
Chip EMIFILr RC Combined Type/RC Combined Array Type
eDimensions (LgW)
Code
2.0g1.25mm
3.2g1.6mm
Dimensions (LgW)
21
31
qProduct ID
NF Chip EMIFILr
Product ID
wStructure
R
A
RC Combined Type
RC Combined Array Type
Code Structure
iPackaging
L
B
D
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø180mm Reel)
Code Packaging
NFR
All Series
NFAppGD
Series
2Sn Plating
Code Electrode
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
rFeatures
Code
RC Combined Type for Signal Lines
Features
GD
yResistance
Expressed by three-digit alphanumerics. The unit is in ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
uElectrode/Others (NFR Series)
44 Circuits
Code Number of Circuits
uNumber of Circuits (NFAppGD Series)
t
470
y
470
q
NF
r
GD
e
21
w
R
u
2
i
L
0805
1206
EIA
95
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr Capacitor Type NFM18C/21C/3DC/41C Series
NFM18C Series
NFM18C series is a 1.6x0.8mm EMI suppression
filter for signal lines which have a three terminal
structure using Murata's multilayer technology.
■ Features
1. Ultra small size in 1.6x0.8x0.6mm enables high
density mounting.
2. Three terminal structure with low residual
inductance (ESL)* characteristics achieves large
insertion loss characteristics even in high
frequency area.
3. NFM18C series covers capacitance range from
22 to 22,000pF.
* Not exceeding one-tenth of monolithic ceramic
capacitors (two terminals).
■ Applications
1. EMI suppression of circuit for insertion loss in
quantity
2. Noise suppression up to GHz
0.2 min.
0.6±0.1
0.8±0.1
1.6±0.1
0.4±0.1 0.8±0.10.25±0.1
0.2±0.1
(1)
(in mm)
(3)
(2)
(2)
NFM18C Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(mA)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM18CC220U1C3 22 +20%,-20% 16 400 1000 -55 to +125
NFM18CC470U1C3 47 +20%,-20% 16 400 1000 -55 to +125
NFM18CC101R1C3 100 +20%,-20% 16 500 1000 -55 to +125
NFM18CC221R1C3 220 +20%,-20% 16 500 1000 -55 to +125
NFM18CC471R1C3 470 +20%,-20% 16 500 1000 -55 to +125
NFM18CC102R1C3 1000 +20%,-20% 16 600 1000 -55 to +125
NFM18CC222R1C3 2200 +20%,-20% 16 700 1000 -55 to +125
NFM18CC223R1C3 22000 +20%,-20% 16 1000 1000 -55 to +125
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0.1 1 10 100 1000 2000
80
70
60
50
40
30
20
10
0
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
NFM18CC223R1C3
NFM18CC222R1C3
NFM18CC102R1C3
NFM18CC471R1C3
NFM18CC221R1C3
NFM18CC101R1C3
NFM18CC470U1C3
NFM18CC220U1C3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
96
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM21C Series
The chip "EMIFIL" NFM21C series is a chip type three
terminal EMI suppression filter. It can reduce
residual inductance to an extremely low level making
it excellent for noise suppression at high frequencies.
■ Features
1. Small and low profile of 2.0x1.25x0.85mm
enables high density mounting.
2. Three terminal structure enables high performance
in high frequency range.
3. Uses original electrode structure which realizes
excellent solderability.
4. An electrostatic capacitance range of 22 to
22,000pF enables suppression of noise at specific
frequencies.
■ Applications
1. PCs and peripherals which emit high amount of noise
2. Compact size equipment such as PDAs, PC cards and
mobile telecommunications equipment
3. Severe EMI suppression and high impedance circuits
such as digital circuits
0.3±0.2
(1) (3)
(2)
(2)
1.25±0.1
(in mm)
2.0±0.2
0.6±0.2
0.85±0.1
+0.2
-0.1
0.2
NFM21C Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(mA)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM21CC220U1H3 22 +20%,-20% 50 700 1000 -55 to +125
NFM21CC470U1H3 47 +20%,-20% 50 700 1000 -55 to +125
NFM21CC101U1H3 100 +20%,-20% 50 700 1000 -55 to +125
NFM21CC221R1H3 220 +20%,-20% 50 700 1000 -55 to +125
NFM21CC471R1H3 470 +20%,-20% 50 1000 1000 -55 to +125
NFM21CC102R1H3 1000 +20%,-20% 50 1000 1000 -55 to +125
NFM21CC222R1H3 2200 +20%,-20% 50 1000 1000 -55 to +125
NFM21CC223R1H3 22000 +20%,-20% 50 2000 1000 -55 to +125
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
1 10 100 1000
0
20
40
60
2000
80
100 5 50 500
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
NFM21CC101U1H3
NFM21CC470U1H3
NFM21CC220U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
97
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM3DC Series
The chip "EMIFIL" NFM3DC series is a chip type
three terminal EMI suppression filter. It can reduce
residual inductance to an extremely low level making
it excellent for noise suppression at high frequencies.
■ Features
An electrostatic capacitance range of 22 to 22,000pF
enables suppression of noise at specific frequencies.
■ Applications
High noise radiation and high impedance circuits such
as digital circuits
1.1±0.3
3.2±0.2
0.3±0.2
1.25±0.2
0.7±0.2
0.25±0.2
(1)
(2)
(2)
(3)
(in mm)
NFM3DC Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(mA)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM3DCC220U1H3 22 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC470U1H3 47 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC101U1H3 100 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC221R1H3 220 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC471R1H3 470 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC102R1H3 1000 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC222R1H3 2200 +50%,-20% 50 300 1000 -55 to +125
NFM3DCC223R1H3 22000 +50%,-20% 50 300 1000 -55 to +125
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0
20
40
60
80
100 1 5 10 50 100 500 1000 2000
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
NFM3DCC470U1H3
NFM3DCC220U1H3
NFM3DCC101UH3
NFM3DCC221R1H3
NFM3DCC471R1H3
NFM3DCC102R1H3
NFM3DCC222R1H3
NFM3DCC223R1H3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
98
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM41C Series
The chip "EMIFIL" NFM41C series is a chip type three
terminal EMI suppression filter. It can reduce
residual inductance to an extremely low level making
it excellent for noise suppression at high frequencies.
■ Features
An electrostatic capacitance range of 22 to 22,000pF
enables suppression of noise at specific frequencies.
■ Applications
High noise radiation and high impedance circuits such
as digital circuits
(1)
(2)
(2)
(3)
1.5±0.3
4.5±0.3
0.4±0.3
1.6±0.3
1.0±0.2
(in mm)
0.3+0.3
-0.2
NFM41C Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(mA)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM41CC220U2A3 22 +50%,-20% 100 300 10000 -55 to +125
NFM41CC470U2A3 47 +50%,-20% 100 300 10000 -55 to +125
NFM41CC101U2A3 100 +50%,-20% 100 300 10000 -55 to +125
NFM41CC221U2A3 220 +50%,-20% 100 300 10000 -55 to +125
NFM41CC471R2A3 470 +50%,-20% 100 300 10000 -55 to +125
NFM41CC102R2A3 1000 +50%,-20% 100 300 10000 -55 to +125
NFM41CC222R2A3 2200 +50%,-20% 100 300 10000 -55 to +125
NFM41CC223R2A3 22000 +50%,-20% 100 300 10000 -55 to +125
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0
20
40
60
80
1001 5 10 50 100 500 1000 2000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
NFM41CC223R2A3
NFM41CC222R2A3
NFM41CC102R2A3
NFM41CC471R2A3
NFM41CC221U2A3
NFM41CC101U2A3
NFM41CC470U2A3
NFM41CC220U2A3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
99
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr Capacitor Array Type NFA31C Series
NFA31C Series
NFA31C series is a chip EMI suppression filter for
surface mount applications using Murata's ceramic
processing technology and filter design technology.
The series is well suited for EMI suppression in
digital I/O lines of varied electronic equipment such
as notebook size PCs.
■ Features
1. High density mounting can be realized because of 4
circuits in one package with 0.8mm pitch.
2. Suitable for high frequency noise suppression
because of low residual inductance of three
terminal structure.
3. Excellent EMI suppression can be realized because
of two terminal simple GNDs for 4 circuits.
4. 22 to 22,000pF lineups can be used depending on
noise frequency.
■ Applications
1. Personal computers and peripherals
2. Telephones, PPCs, communications equipment
3. Digital TVs, DVDs
3.2±0.2
0.8±0.1 1.6±0.2
0.4±0.2 1.1±0.5
(in mm)
0.8±0.2
(1)
(7) (8) (9) (10)
(3) (4) (5) (6)
(2)
0.05 min.
0.05 min.
NFA31C Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(mA)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFA31CC220S1E4 22 +20%,-20% 25 200 1000 -40 to +85
NFA31CC470S1E4 47 +20%,-20% 25 200 1000 -40 to +85
NFA31CC101S1E4 100 +20%,-20% 25 200 1000 -40 to +85
NFA31CC221S1E4 220 +20%,-20% 25 200 1000 -40 to +85
NFA31CC471R1E4 470 +20%,-20% 25 200 1000 -40 to +85
NFA31CC102R1E4 1000 +20%,-20% 25 200 1000 -40 to +85
NFA31CC222R1E4 2200 +20%,-20% 25 200 1000 -40 to +85
NFA31CC223R1C4 22000 +20%,-20% 16 200 1000 -40 to +85
Number of Circuits: 4
■ Equivalent Circuit
Input
Output
GND (1) (2) GND
No polarity.
(7) (8) (9) (10)
(3) (4) (5) (6)
■ Insertion Loss Characteristics
0
20
40
60
80
1 105 50 100 500 1000 2000
100
Frequency (MHz)
Insertion Loss (dB)
NFA31CC223R1C4
NFA31CC222R1E4
NFA31CC102R1E4
NFA31CC471R1E4 NFA31CC221S1E4
NFA31CC101S1E4
NFA31CC470S1E4
NFA31CC220S1E4
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
100
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Monolithic Type NFL18ST/18SP/21S Series
NFL18ST Series
NFL18ST series is an EMI suppression filter for high
speed signal lines, achieving T-type structure in
1.6x0.8mm size with Murata's multilayer technology.
■ Features
1. Ultra-small size in 1.6x0.8x0.8mm
2. Steep insertion loss characteristics realize
excellent noise suppression and prevent distortion
of signal waveform.
3. By minimizing stray capacitance of inductor,
achieves high performance in noise suppression
in high frequency range.
4. Three different values of cut-off frequency are
available, ranging from 200MHz up to 500MHz.
5. Since all side electrode structures are the same,
it is no polarity.
■ Applications
Noise suppression for video signal lines (RGB lines)
and high speed clock lines
0.2 min.
0.25±0.1 0.25±0.1
0.8±0.1
0.8±0.1
0.4±0.1
1.6±0.1
0.2 min.
(1) (3)
(2)
(2)
(in mm)
NFL18ST Series
Part Number Cut-off Frequency
(MHz) Capacitance
(pF) Inductance
(nH)
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Insulation
Resistance
(M ohm)
Operating
Temperature Range
(°C)
NFL18ST207X1C3 200 25 +20%,-20% 110 +20%,-20% 16 150 1000 -55 to 125
NFL18ST307X1C3 300 18 +20%,-20% 62 +20%,-20% 16 200 1000 -55 to 125
NFL18ST507X1C3 500 10 +20%,-20% 43 +20%,-20% 16 200 1000 -55 to 125
Number of Circuits: 1
■ Equivalent Circuit
Input
(1)
GND
(2)
Output
(3)
No Polarity.
■ Insertion Loss Characteristics
Frequency (MHz)
(50Ω - 50Ω)
Insertion Loss (dB)
1 10 100 50001000
0
10
20
30
40
50
60
70
NFL18ST307X1C3
NFL18ST507X1C3
NFL18ST207X1C3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
101
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFL18SP Series
The chip "EMIFIL" NFL18SP series is an EMI Suppression
filter for high speed signal lines, achieving pi-type
structure in 0603 size with Murata's multilayer
technology.
■ Features
1. Ultra-small size in 1.6x0.8x0.6 mm
2. Achieves high performance in noise suppression over
wide frequency range
3. Steep insertion loss characteristics realize
excellent noise suppression and prevent distortion
of signal waveform.
4. Line up 4 items of cut-off frequency range from 150
to 500MHz
■ Applications
EMI suppression for digital signal line such as RGB
and high speed clock lines
0.2 min.
0.6±0.1
0.8±0.1
1.6±0.1
(2)
(3)
(3)
(1)
(1)
(2)
0.4±0.1
0.3±0.1 0.3±0.1 0.15±0.1
(in mm)
0.15±0.1
0.15±0.1
NFL18SP Series
Part Number Cut-off Frequency
(MHz) Capacitance
(pF) Inductance
(nH)
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Insulation
Resistance
(M ohm)
Operating
Temperature Range
(°C)
NFL18SP157X1A3 150 34 +20%,-20% 100 +20%,-20% 10 100 1000 -55 to 125
NFL18SP207X1A3 200 24 +20%,-20% 80 +20%,-20% 10 100 1000 -55 to 125
NFL18SP307X1A3 300 19 +20%,-20% 60 +20%,-20% 10 100 1000 -55 to 125
NFL18SP507X1A3 500 11 +20%,-20% 38 +20%,-20% 10 100 1000 -55 to 125
Number of Circuits: 1
■ Equivalent Circuit
GND
(2)
(1) Input Output (3)
No polarity.
■ Insertion Loss Characteristics
0
10
20
30
40
50
60
70 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
2000
NFL18SP207X1A3
NFL18SP157X1A3
NFL18SP307X1A3
NFL18SP507X1A3
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
102
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFL21S Series
The chip "EMIFIL" NFL21S series is a high performance
EMI suppression filter in 2.0x1.25mm size for high
speed signal lines by using Murata's processing
technology.
■ Features
1. Suppresses noise with little attenuation of the
signal itself due to its steep filtering
characteristics.
2. Murata's original internal structure design enables
excellent noise suppression up to high frequencies.
3. Available in ten different values of cut-off
frequency ranging from 10MHz up to 500MHz.
■ Applications
Suppression of high magnitude radiated noise generated
by high speed digital circuits such as clock and RGB
1.25±0.1
0.25±0.2
0.3±0.2 0.4±0.2
2.0±0.2
0.6±0.2
0.85±0.1
(2)
(2)
(3)(1)
(in mm)
NFL21S Series
Part Number Cut-off Frequency
(MHz) Capacitance
(pF) Inductance
(nH)
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Insulation
Resistance
(M ohm)
Operating
Temperature Range
(°C)
NFL21SP106X1C3 10 670 +20%,-20% 680 +20%,-20% 16 100 1000 -55 to 125
NFL21SP206X1C7 20 240 +20%,-20% 700 +20%,-20% 16 100 1000 -55 to 125
NFL21SP506X1C3 50 84 +20%,-20% 305 +20%,-20% 16 150 1000 -55 to 125
NFL21SP706X1C3 70 76 +20%,-20% 185 +20%,-20% 16 150 1000 -55 to 125
NFL21SP107X1C3 100 44 +20%,-20% 135 +20%,-20% 16 200 1000 -55 to 125
NFL21SP157X1C3 150 28 +20%,-20% 128 +20%,-20% 16 200 1000 -55 to 125
NFL21SP207X1C3 200 22 +20%,-20% 72 +20%,-20% 16 250 1000 -55 to 125
NFL21SP307X1C3 300 19 +10%,-10% 45 +10%,-10% 16 300 1000 -55 to 125
NFL21SP407X1C3 400 16 +10%,-10% 34 +10%,-10% 16 300 1000 -55 to 125
NFL21SP507X1C3 500 12 +10%,-10% 31 +10%,-10% 16 300 1000 -55 to 125
Number of Circuits: 1
■ Equivalent Circuit
GND
(2)
(1) Input Output (3)
No polarity.
■ Insertion Loss Characteristics
0
20
40
801 105 50 100 500 1000 2000
60
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP307X1C3
NFL21SP207X1C3
NFL21SP407X1C3
NFL21SP507X1C3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
103
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Array Type NFA18S/21S Series
NFA18S Series
■ Feautures
1. NFA18SL series is LC combined noise suppression filter
whose noise suppression curve is very steep and
deep in spite of its small shape.
2. [cutoff frequency 300MHz, 400MHz, 480MHz type]
These products have good noise suppression effect
at the frequency range over 800MHz which is important
for sensitivity of mobile phones, and suppress
radiation noise from LCD lines or camera module lines
very well.
[cutoff frequency 130MHz, 180MHz, 200MHz type]
These products have good noise suppression effect
at UHF range in addition to 800MHz range.
This characteristics works well at noise suppression
for improvement of sensitivity at digital TVs.
3. Various cutoff frequency is available to control
signal rise speed and signal fall speed.
4. circuits are built in 1.6x0.8mm chip size,
it saves the large amount of mounting space.
■ Aplication
Noise suppression of LCD signal lines,
camera module lines.
(in mm)
: Electrode
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.2±0.1
0.15±0.1
0.2±0.1
0.25±0.1
0.6+0.05
–0.1
1.6±0.1
0.8±0.1
0.4±0.05
(3) (5) (6)
Polarity Marking
(4)
(7) (9) (10)(8)
(Top View)
(Side View)
(Bottom View)
GND (2)
(1) GND
NFA18SL
137/187/207
V1A45
(in mm)
: Electrode
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.20±0.1
0.15±0.1
0.2±0.1 0.25±0.1
0.5±0.1
1.6±0.1
0.8±0.1
0.4±0.05
(3) (5) (6)
Polarity Marking
(4)
(7) (9) (10)(8)
(Top View)
(Side View)
(Bottom View)
(2) GNDGND (1)
NFA18SL
307/407/487
V1A45
Part Number Cut-off
Frequency
(MHz)
Insertion Loss
at Cut-off Frequency
(dB)
Insertion Loss
at 470MHz (min.)
(dB)
Insertion Loss
at 800MHz (min.)
(dB)
Insertion Loss
at 900MHz (min.)
(dB)
Insulation
Resistance (min.)
(M ohm)
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Withstand
Voltage
(Vdc)
NFA18SL137V1A45 130 6 max 25 - 25 1000 10 50 30
NFA18SL187V1A45 180 6 max 20 - 20 1000 10 50 30
NFA18SL207V1A45 200 6 max 15 - 15 1000 10 50 30
NFA18SL307V1A45 300 6 max - 20 20 1000 10 100 30
NFA18SL407V1A45 400 6 max - 18 18 1000 10 100 30
NFA18SL487V1A45 480 6 max - 15 15 1000 10 100 30
Operating Temperature Range: -40°C to +85°C Number of Circuits: 4
■ Equivalent Circuit
NFA18SL 137/187/207 V1A45
(3) (4) (5) (6)
(7) (8) (9)
GND (1)
*Please change IN/OUT according to the circuit condition.
(2) GND
(10)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
NFA18SL 307/407/487 V1A45
(3) (4) (5) (6)
(7) (8) (9)
GND (1)
*Please change IN/OUT according to the circuit condition.
(2) GND
(10)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
104
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Insertion Loss Characteristics
Frequency (MHz)
Insertion Loss (dB)
0
10
20
30
40
50
60
7010 100 1000 3000
(50Ω - 50Ω)
NFA18SL137V1A45
NFA18SL207V1A45
NFA18SL187V1A45
Frequency (MHz)
(50Ω - 50Ω)
Insertion Loss (dB)
10 100 30001000
0
10
20
30
40
50
NFA18SL307V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA21S Series
■ Features
1. Steep insertion loss characteristics
2. Suitable for noise suppression in 800MHz or
higher frequency
3. Size: 2.0x1.25mm
4. 4 circuits in one package
■ Applications
Noise suppression for LCD line
NFA21SLpppX1A45p
NFA21SLpppV1A45p
NFA21SLpppX1A48p
0.5±0.1
0.85±0.1
T (mm)
NFA21SLpppV1A48p
2.0±0.1
(3) (4) (5) (6)
(7) (8) (9)
0.25±0.1 0.15 min.
0.5±0.05
0.25±0.1
0.2±0.15
0.2±0.15
1.25±0.1
T
(1) GND GND (2)
(Top View)
(Bottom View)
(10)
0.25±0.1
Polarity
Marking
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
Electrode
(in mm)
NFA21S Series
Part Number Cut-off
Frequency
(MHz)
Insertion Loss
at Cut-off Frequency
(dB)
Insertion Loss
at 500MHz (min.)
(dB)
Insertion Loss
at 800MHz (min.)
(dB)
Insertion Loss
at 900MHz (min.)
(dB)
Insertion Loss
at 1000MHz (min.)
(dB)
Insulation
Resistance (min.)
(M ohm)
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Withstand
Voltage
(Vdc)
NFA21SL506X1A48 50 0 to 6 30 - - 20 1000 10 20 30
NFA21SL806X1A48 80 2 to 7 25 - - 25 1000 10 20 30
NFA21SL207X1A45 200 2 to 7 13 25 - 25 1000 10 100 30
NFA21SL207X1A48 200 2 to 7 13 25 - 25 1000 10 100 30
NFA21SL307X1A45 300 2 to 7 7 20 - 25 1000 10 100 30
NFA21SL307X1A48 300 2 to 7 7 20 - 25 1000 10 100 30
NFA21SL287V1A45 280 6 max - 25 25 - 1000 10 100 30
NFA21SL287V1A48 280 6 max - 25 25 - 1000 10 100 30
NFA21SL317V1A45 310 6 max - 20 20 - 1000 10 100 30
NFA21SL317V1A48 310 6 max - 20 20 - 1000 10 100 30
NFA21SL337V1A45 330 6 max - 15 15 - 1000 10 100 30
NFA21SL337V1A48 330 6 max - 20 20 - 1000 10 100 30
Operating Temperature Range: -55°C to +125°C Number of Circuits: 4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
105
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
(3) (4) (5) (6)
(7) (8) (9)
(1) GND GND (2)
(10)
■ Insertion Loss Characteristics
NFA21SL_X Series
60
50
40
30
20
10
0
1 10 100 30001000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
NFA21SL806X1A48
NFA21SL207X1A45(48)
NFA21SL307X1A45(48)
NFA21SL506X1A48
NFA21SL_V_48 Series
60
50
40
30
20
10
0
10 100 30001000
Frequency (MHz)
Insertion Loss (dB)
NFA21SL337V1A48
NFA21SL287V1A48
NFA21SL317V1A48
(50Ω - 50Ω)
NFA21SL_V_45 Series
0
10
20
30
40
50
60
Insertion Loss (dB)
(50Ω - 50Ω)
Frequency (MHz)
10 100 1000 3000
NFA21SL317V1A45
NFA21SL287V1A45
NFA21SL337V1A45
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
106
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Wire Wound Type NFW31S Series
NFW31S Series
The signal line chip EMI filter NFW31S series consists
of high performance EMI suppression filters. They are
designed for noise suppression in high speed signal
digital circuits in which the signal harmonics are
prone to becoming noise sources. These filters achieve
a 100dB/dec. (typ.) damping characteristic with
Murata's innovative circuit design. This makes these
chips effective in applications where the signal and
noise frequencies are close to each other.
■ Features
1. Suppresses signal noise with little or no
attenuation of the signal itself.
2. Murata's original internal structure design enables
excellent noise suppression up to high frequencies
(40dB at 1GHz typ.).
3. NFW31S series is available in 9 different values of
cut-off frequency ranging from 10MHz up to 500MHz.
(1): Input electrode
(2): Ground electrode
(3): Output electrode
(1) (2) (3)
2.3±0.2
0.7±0.3 0.65±0.2 0.7±0.3
1.8±0.2
1.6±0.2
3.2±0.3
∗No polarity.
(in mm)
NFW31S Series
Part Number Nominal
Cut-off Freq.
(MHz)
Attenuation
at 10MHz
(dB)
Attenuation
at 20MHz
(dB)
Attenuation
at 50MHz
(dB)
Attenuation
at 100MHz
(dB)
Attenuation
at 150MHz
(dB)
Attenuation
at 200MHz
(dB)
Attenuation
at 300MHz
(dB)
Attenuation
at 400MHz
(dB)
Attenuation
at 500MHz
(dB)
Attenuation
at 1000MHz
(dB)
NFW31SP106X1E4 10 6 max. 5 min. 25 min. 25 min. - 25 min. - - 30 min. 30 min.
NFW31SP206X1E4 20 - 6 max. 5 min. 25 min. - 25 min. - - 30 min. 30 min.
NFW31SP506X1E4 50 - - 6 max. 10 min. - 30 min. - - 30 min. 30 min.
NFW31SP107X1E4 100 - - - 6 max. - 5 min. - - 20 min. 30 min.
NFW31SP157X1E4 150 - - - - 6 max. - 10 min. 20 min 30 min. 30 min.
NFW31SP207X1E4 200 - - - - - 6 max. - - 10 min. 30 min.
NFW31SP307X1E4 300 - - - - - - 6 max. - 5 min. 15 min.
NFW31SP407X1E4 400 - - - - - - - 6 max. - 10 min.
NFW31SP507X1E4 500 - - - - - - - - 6 max. 10 min.
Rated Current: 200mA Rated Voltage: 25Vdc Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
GND
(2)
(1) Input Output (3)
No polarity.
■ Insertion Loss Characteristics
0
20
40
801 105 50 100 500 1000 2000
NFW31SP106X1E4
NFW31SP207X1E4
NFW31SP507X1E4
Insertion Loss (dB)
Frequency (MHz)
NFW31SP506X1E4
60 NFW31SP206X1E4
NFW31SP157X1E4
NFW31SP107X1E4
NFW31SP307X1E4
NFW31SP407X1E4
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Example of EMI Suppression
in an Actual Circuit
Type of Filter
Signal Waveform
and Noise Spectrum
before Filter Mounting
Filter Combined
with Conventional LCs
NFW31S Series
(Cut-off frequency 50MHz)
Conventional Chip
Solid Type EMI Filter
(NFM41CC 470pF)
EMI Suppression Effect Description
NFW31S's steep attenuation
characteristic means excellent EMI
suppression without waveform
cornering.
3-terminal capacitors suppress
signal frequencies as EMI
frequencies so the signal waveform
is distorted.
Combinations of inductors and
capacitors can yield a steep
attenuation characteristic, but they
require a great deal more mounting
space.
Moreover, at high frequencies the
EMI suppression is less than that
obtained by NFW31S.
Measuring Circuit
Signal Wave Form 20ns/div
(
1V/div
)
L: Chip Inductor
C: Chip Capacitor
(270pF)
L
C
L
Signal W av eform 20ns/div
1V/div
()
Noise Spectrum
(10:1 Active Probe)
10MHz
74ALS04 74ALS00
EMI
Suppression Filter
Measuring
Point
EMI Suppression Effect
100
80
60
40
20
0100 200 300 400 500
Frequency (MHz)
Noise Level (dBµV)
100
80
60
40
20
0100 200 300 400 500
Frequency (MHz)
Noise Level (dBµV)
Level before
filter mounting
100
80
60
40
20
0100 200 300 400 500
Frequency (MHz)
Noise Level (dBµV)
Level before
filter mounting
100
80
60
40
20
0100 200 300 400 500
Frequency (MHz)
Noise Level (dBµV)
Level before
filter mounting
Noise Suppression Effect of NFW31S Series
107
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
108
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr RC Combined Type NFR21G Series
NFR21G Series
NFR21G series is comprised of high performance EMI
suppression filters which can suppress distortion of
waveform. Various items are to be used, considering
circuit impedance and noise condition.
■ Features
1. Murata's original inner design realizes small and
low profile of 2.0x1.25x0.5mm.
2. Distributed constant circuit realizes smooth change
of impedance which prevents reflection of signal
and distortion of wave shape.
3. NFR21G series is effective in a line where
ground is not stable, because the resistance
element in the filter absorbs noise and returns it
to ground line.
4. NFR21G series has no polarity so it can be
used in dual direction transport lines.
5. NFR21G series has various lineups of resistance
(22 to 100 ohm) and capacitance (10 to 100pF).
■ Applications
Interface lines and clock lines where signals tend
to be distorted
1.0±0.35
0.5±0.2
2.0±0.2
0.95±0.35
1.25±0.2
(Bottom View)
(Top View)
(1)
(2)
(2)
(3)
1.0 max.
0.3±0.2
0.25
0.3±0.2
0.25
(in mm)
NFR21G Series
Part Number Capacitance
(pF) Resistance
(ohm) Rated Current
(mA) Rated Voltage
(Vdc) Insulation Resistance
(M ohm)
Operating
Temperature Range
(°C)
NFR21GD1002202 10 +20%,-20% 22 +30%,-30% 50 50 1000 -40 to 85
NFR21GD1004702 10 +20%,-20% 47 +30%,-30% 35 50 1000 -40 to 85
NFR21GD4702202 47 +20%,-20% 22 +30%,-30% 50 50 1000 -40 to 85
NFR21GD4704702 47 +20%,-20% 47 +30%,-30% 35 50 1000 -40 to 85
NFR21GD4706802 47 +20%,-20% 68 +30%,-30% 30 50 1000 -40 to 85
NFR21GD4701012 47 +20%,-20% 100 +30%,-30% 25 50 1000 -40 to 85
NFR21GD1012202 100 +20%,-20% 22 +30%,-30% 50 50 1000 -40 to 85
NFR21GD1014702 100 +20%,-20% 47 +30%,-30% 35 50 1000 -40 to 85
NFR21GD1016802 100 +20%,-20% 68 +30%,-30% 30 50 1000 -40 to 85
NFR21GD1011012 100 +20%,-20% 100 +30%,-30% 25 50 1000 -40 to 85
Number of Circuits: 1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
109
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
GND
(2)
No polarity
Output (3) (1) Input
■ Insertion Loss Characteristics
NFR21GD1002202
NFR21GD1004702
NFR21GD4702202
NFR21GD4704702
NFR21GD4706802
NFR21GD1012202
NFR21GD1014702
NFR21GD1016802
1 10 100 1000
0
10
20
30
40
50
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 150Ω)
NFR21GD1011012
NFR21GD4701012
1 10 100 1000
0
10
20
30
40
50
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 3kΩ)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Effect of Noise Suppression by NFR21G
NFR21G is effective even if ground line is not stable enough
due to its distributed constant circuit structure. HCU04 HC04 Filter HC00
10MHz
Type of Filter
Noise Level without Filter
Filter Mounting Condition
Standard Type Chip EMIFILr
(100pF)
Filter Mounting Condition
Standard Type Chip EMIFILr
(100pF)
Filter Mounting Condition
NFR21GD4701012
Filter Mounting Condition
NFR21GD4701012
EMI Suppression Effect Description
With Stable Ground Line
Filter
Thru-hole
(connection ground pattern
with ground plane)
Signal line
30
10
20
30
40
50
60
84 138 192
Frequency (MHz)
Noise Level (dB µ V/m)
246 300
30
10
20
30
40
50
60
84 138 192
Frequency (MHz)
Noise Level (dB µ V/m)
246 300
The standard type chip EMIFILr is effective on stable
ground lines.
NFR21G has some advantages to standard type
EMIFILr on stable ground lines.
30
10
20
30
40
50
60
84 138 192
Frequency (MHz)
Noise Level (dB µ V/m)
246 300
Type of Filter
Noise Level without Filter
EMI Suppression Effect Description
With Poor Ground Line
30
10
20
30
40
50
60
84 138 192
Frequency (MHz)
Noise Level (dB µ V/m)
246 300
30
10
20
30
40
50
60
84 138 192
Frequency (MHz)
Noise Level (dB µ V/m)
246 300
The standard type EMIFILr loses efficiency on poor
ground lines.
NFR21G is effective even on poor ground lines because
of its distributed constant circuit structure and unique
system to limit rush current.
30
10
20
30
40
50
60
84 138 192
Frequency (MHz)
Noise Level (dB µ V/m)
246 300
Without ground plane
Signal line
Testing Circuit
Ground pattern
EMI Suppression Effect
15cm
Signal Pattern
Whole surface (back side)
ground plane
Filter
Ground pattern
Noise Suppression Effect of NFR21G Series
110
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Waveform Distortion Suppressing Function
by NFR21G
Type of Filter
Initial Waveform (no filter)
When Ordinary Capacitor
Filter is Used
EMI Suppression Effect Description
Resonance between the internal
capacitance of the IC and the
inductance of the print pattern causes
waveform overshooting and
undershooting.
Ordinary capacitor filters have no
waveform distortion suppressing
capability, and they cannot suppress
disturbances in the waveforms.
The waveform distortion suppressing
function of NFR21G minimizes
disturbances of waveforms.
Testing Circuit
Voltage Waveform
NFR21G
↑ :1V/div → :20ns/div
Voltage Waveform
↑ :1V/div → :20ns/div
Voltage Waveform
↑ :1V/div → :20ns/div
EMI Suppression Effect
HCU04 AC04 Filter AC04
10MHz
Measuring Point
Noise Suppression Effect of NFR21G Series
111
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
112
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr RC Combined Array Type NFA31G Series
NFA31G Series
NFA31G series is a high performance EMI suppression
filter array with a 4-circuit noise filter in 3.2x1.6mm
size. NFA31G realizes high density mounting.
■ Features
1. NFA31G is a 4-circuit noise filter in 3.2x1.6mm
size with 0.8mm pitch. High density mounting is
available.
2. Three terminal structure enables excellent high
frequency performance.
3. Distributed constant circuit realizes smooth change
of impedance which prevents reflection of signal
and distortion of wave shape.
4. NFA31G series is effective in lines where ground
is not stable, because the resistance element in
the filter absorbs noise and returns it to ground
line.
1.1±0.5
1.6±0.23.2±0.2
0.8±0.2
0.8±0.1
0.05 min.
0.05 min.
0.4±0.15
(Top View)
(Bottom View)
(1) (2)
(3) (4) (5) (6)
(7) (8) (9) (10)
(in mm)
NFA31G Series
Part Number Capacitance
(pF) Resistance
(ohm) Rated Current
(mA) Rated Voltage
(Vdc) Insulation Resistance
(M ohm)
Operating
Temperature Range
(°C)
NFA31GD1006R84 10 +20%,-20% 6.8 +40%,-40% 50 6 1000 -40 to 85
NFA31GD1004704 10 +20%,-20% 47 +30%,-30% 20 6 1000 -40 to 85
NFA31GD1001014 10 +20%,-20% 100 +30%,-30% 15 6 1000 -40 to 85
NFA31GD4706R84 47 +20%,-20% 6.8 +40%,-40% 50 6 1000 -40 to 85
NFA31GD4703304 47 +20%,-20% 33 +30%,-30% 20 6 1000 -40 to 85
NFA31GD4704704 47 +20%,-20% 47 +30%,-30% 20 6 1000 -40 to 85
NFA31GD4701014 47 +20%,-20% 100 +30%,-30% 15 6 1000 -40 to 85
NFA31GD1016R84 100 +20%,-20% 6.8 +40%,-40% 50 6 1000 -40 to 85
NFA31GD1014704 100 +20%,-20% 47 +30%,-30% 20 6 1000 -40 to 85
NFA31GD1011014 100 +20%,-20% 100 +30%,-30% 15 6 1000 -40 to 85
Number of Circuits: 4
■ Equivalent Circuit
(2)GND
(3) (4) (5) (6)
(7) (8) (9) (10)
Output
Input
No polarity.
(1)GND
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
113
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Insertion Loss Characteristics
1 10 100 1000
0
10
20
30
40
50 2000
NFA31GD1006R84
NFA31GD1016R84
NFA31GD4706R84
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
1 10 100 1000
0
10
20
30
40
50 2000
Insertion Loss (dB)
Frequency (MHz)
NFA31GD1004704
NFA31GD4704704
NFA31GD1014704
(50Ω - 50Ω)
1 10 100 1000
0
10
20
30
40
50 2000
NFA31GD1001014
NFA31GD4701014
Insertion Loss (dB)
Frequency (MHz)
NFA31GD1011014
(50Ω - 50Ω)0
10
20
30
40
50
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
1000100101 2000
NFA31GD4703304
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
114
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr for Large Current NFM18P/21P/3DP/31P/41P/55P Series
NFM18PS Series
■ Features
1. Excellent noise suppression characteristics in high
frequency band.
2. Rated current of 2A is achieved in small size of
1.6x0.8mm.
3. Suitable for noise suppression in IC power line.
■ Applications
For IC power lines of digital equipment such as DVDs,
DSCs, Mobile Phones, Digital TVs (in mm)
1.6±0.1
0.4±0.1
0.6±0.1
0.8
0.8±0.1
(2)
(1) (3)
(2)
0.15+0.2
-0.1
0.15+0.2
-0.1
+0.2
-0.1
: Electrode
0.2 min.
NFM18PS Series
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM18PS474R0J3 0.47 +20%,-20% 6.3 2 1000 -55 to +125
NFM18PS105R0J3 1.0 +20%,-20% 6.3 2 500 -55 to +105
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0
10
20
30
40
50
60
70
80
90
1000.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
3000
(50Ω - 50Ω)
NFM18PS474R0J3
NFM18PS105R0J3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
115
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM18PC Series
NFM18PC series is a high performance EMI suppression
filter in 1.6x0.8mm size for high-speed IC power
supply lines by using Murata processing technology.
■ Features
1. Ultra-small size in 1.6x0.8mm
2. Three terminal structure with low residual (ESL)*
and large capacitance 2.2 micro F (max.) realize
large insertion loss characteristics over wide
frequency range.
3. Large rated current 4A max. is suitable for noise
suppression of circuits which require large current.
4. NFM18PC series has line up of capacitance 0.1 to 2.2
micro F.
* Not exceeding one-tenth of monolithic ceramic
capacitors (two terminal).
■ Applications
1. Noise suppression for large capacitance circuits
such as high speed IC power lines
2. Control change of voltage for high speed IC
0.2 min.
0.25±0.1 0.25±0.1
0.8±0.1
0.8±0.1
0.4±0.1
1.6±0.1
0.2 min.
(1) (3)
(2)
(2)
(in mm)
NFM18PC Series
(1 micro F, 2.2 micro F - 10V)
0.2 min.
0.6±0.1
0.8±0.1
1.6±0.1
0.4±0.1 0.8±0.10.25±0.1
0.2±0.1
(1)
(in mm)
(3)
(2)
(2)
NFM18PC Series
(0.1 - 0.47 micro F, 2.2 micro F - 6.3V)
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM18PC104R1C3 0.1 +20%,-20% 16 2 1000 -55 to +125
NFM18PC224R0J3 0.22 +20%,-20% 6.3 2 1000 -55 to +125
NFM18PC474R0J3 0.47 +20%,-20% 6.3 2 1000 -55 to +125
NFM18PC105R0J3 1.0 +20%,-20% 6.3 2 500 -55 to +105
NFM18PC225B0J3 2.2 +20%,-20% 6.3 2 200 -40 to +85
NFM18PC225B1A3 2.2 +20%,-20% 10 4 200 -40 to +85
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0
20
40
60
80
1000.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
10000
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3 (6.3V)
NFM18PC225B1A3 (10V)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
116
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM21P Series
NFM21P is a three terminal structure component. This
product can be applied to large current DC power lines.
NFM21P is suitable for noise suppression of DC power
lines where relatively large current operates.
■ Features
1. The rated current of 6A max. is suitable for IC's
individual power lines.
2. Small dimension enables higher density packaging.
NFM21P is much smaller size (2.0x1.25x0.85mm).
3. Murata's original internal electrode structure
design realizes excellent EMI suppression
effects from low frequency to high frequency.
0.3±0.2 0.4±0.2
(1) (3)
(2)
(2)
1.25±0.1
2.0±0.2
0.6±0.2
(in mm)
0.85±0.1
0.25±0.2
NFM21P Series
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM21PC104R1E3 0.1 +20%,-20% 25 2 1000 -55 to +125
NFM21PC224R1C3 0.22 +20%,-20% 16 2 1000 -55 to +125
NFM21PC474R1C3 0.47 +20%,-20% 16 2 1000 -55 to +125
NFM21PC105B1A3 1.0 +20%,-20% 10 4 500 -40 to +85
NFM21PC105B1C3 1.0 +20%,-20% 16 4 500 -40 to +85
NFM21PC225B0J3 2.2 +20%,-20% 6.3 4 200 -40 to +85
NFM21PC475B1A3 4.7 +20%,-20% 10 6 100 -40 to +85
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
(50Ω - 50Ω)
Frequency (MHz)
Insertion Loss (dB)
0
20
40
60
80
100 0.1 1 10 100 1000 10000
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3 (10V)
NFM21PC105B1C3 (16V)
NFM21PC225B0J3
NFM21PC475B1A3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
117
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM3DP Series
The chip "EMIFIL" NFM3DP is a chip type
three terminal capacitor with high rated current of 2A.
This series is suited for noise suppression in DC
power supply lines of digital instruments.
■ Features
1. Large rated current (2A) is suitable for
application in DC power lines.
2. Small size (3.2x1.25mm) and low profile (0.7mm max.)
■ Applications
1. Personal computers, word processors and peripherals
2. Telephones, PPCs, communication equipment, etc.
3. Digital TVs, DVDs
4. Telecommunications equipment
1.1±0.3
3.2±0.2
0.3±0.2
1.25±0.2
0.7±0.2
0.25±0.2
(1)
(2)
(2)
(3)
(in mm)
NFM3DP Series
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM3DPC223R1H3 0.022 +20%,-20% 50 2 1000 -55 to +125
In operating temperatures exceeding +85°C, derating of current is necessary.
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0.1 1 10 100 1000 2000
Frequency (MHz)
Insertion Loss (dB)
(50Ω- 50Ω)
0
10
20
30
40
50
60
70
80
90
100
■ Notice (Rating)
When NFM3DP series is used in operating temperatures
exceeding +85°C, derating of current is necessary.
Please apply the derating curve shown in chart according to
the operating temperature.
0
2.0
85 125
0.5
-55 Operating Temperature (˚C)
Rated Current (A)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
118
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM31P Series
3.2±0.2
1.6±0.2
1.3±0.2
(1)
(2)
(2)
(3)
(in mm)
0.3±0.2
1.1±0.3 0.4±0.3 1.6±0.20.4±0.3
NFM3DP Series
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM31PC276B0J3 27 +20%,-20% 6.3 6 20 -40 to +85
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0
10
20
30
40
50
60
70
80
90
1000.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
3000
(50Ω - 50Ω)
NFM31PC276B0J3
NFM31P series is EMI suppression filter for power
lines of high speed IC with high capacitance (27uF)
and large rated current (6A) in 3.2x1.6mm chip size,
which is realized using Murata's high level multilayer
processing technology.
■ Feature
1. Low ESL characteristics and high capacitance of
27uF due to its 3-terminal structure, realizes
high noise suppression effect from low frequency
to high frequency.
It is suitable as decoupling capacitor for broad
frequency range.
2. Large rated current of 6A is suitable for noise
suppression in power lines of high speed IC which
need large current capacity.
■ Application
1. EMI suppression for high noise level circuit which
need large current capacity such as IC power lines.
2. Stabilization of power line voltage in high speed
ICs.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
119
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM41P Series
The chip "EMIFIL" NFM41P series consists of three
terminal structure. These components are able to be
applied to large current DC power lines. NFM41P series
are suitable in noise suppression in DC lines where
relatively large currents operate.
■ Features
1. Large rated current 6A (max.) is suitable for the
application in DC power lines.
2. High electrostatic capacitance and remarkable high
frequency performance are effective for immunity
against surge noise and pulse noise.
■ Applications
1. Personal computers, word processors and peripherals
2. Telephones, PPCs, communication equipment, etc.
3. Digital TVs, DVDs
4. Telecommunications equipment
1.5±0.3
4.5±0.3 0.7 min.
(1) (3)
(2)
(2)
(in mm)
: Electrode
1.6±0.3
1.0±0.2
0.4±0.3
1.6±0.3
0.3+0.3
-
0.2
NFM41P Series
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM41PC204F1H3 0.2 +80%,-20% 50 2 1000 -55 to +85
NFM41PC155B1E3 1.5 +20%,-20% 25 6 300 -55 to +85
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
1 10 100 1000
0
20
40
60
80
100
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
NFM41PC155B1E3
NFM41PC204F1H3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
120
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFM55P Series
The chip solid "EMIFIL" NFM55P is a chip type three
terminal capacitor with high rated current of 6A.
This series is suited for noise suppression in DC
power lines where high rated current and large
capacitance is required.
■ Features
1. Large rated current (6A) and low voltage drop due
to a small DC resistance (0.01 ohm) are suitable
for the application in DC power line.
2. High electrostatic capacitance and remarkable high
frequency performance are effective for the
immunity against the surge noise and the pulse
noise.
3. Only reflow soldering should be applied.
■ Applications
1. Personal computers, word processors and peripherals
2. Telephones, PPCs, communication equipment, etc.
3. Digital TVs, DVDs
4. Telecommunications equipment
5.7±0.3
4.7
5.0±0.3
2.2±0.3
1.7+0.3
-0.2 +0.5
-0.3
(1)
(2)
(3)
(2) (in mm)
NFM55P Series
Part Number Capacitance
(µF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFM55PC155F1H4 1.5 +80%,-20% 50 6 100 -55 to +85
■ Equivalent Circuit
Input(1) Output (3)
(2)
GND No polarity.
■ Insertion Loss Characteristics
0
100 0.1 0.5 50 10001 5 10 100 500
80
60
40
20
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
121
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Type for Large Current NFE31P/61P Series
NFE31P Series
The chip "EMIFIL" NFE31P is a small size T-type
circuit EMI suppression filter.
■ Features
1. Its large rated current of 6A and low voltage drop
due to small DC resistance are suitable for DC
power line use.
2. The feedthrough capacitor realizes excellent high
frequency characteristics.
3. The structure incorporates built-in ferrite beads
which minimize resonance with surrounding circuits.
4. 22 to 2,200pF lineups can be used in signal lines.
1.0±0.2
0.7±0.2
3.2±0.35 1.6±0.15
(in mm)
0.7±0.2
1.6±0.15
(1) (2) (3)
NFE31P Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFE31PT220R1E9 22 +30%,-30% 25 6 1000 -40 to +85
NFE31PT470C1E9 47 +50%,-20% 25 6 1000 -40 to +85
NFE31PT101C1E9 100 +80%,-20% 25 6 1000 -40 to +85
NFE31PT221D1E9 220 +50%,-20% 25 6 1000 -40 to +85
NFE31PT471F1E9 470 +50%,-20% 25 6 1000 -40 to +85
NFE31PT152Z1E9 1500 +50%,-20% 25 6 1000 -40 to +85
NFE31PT222Z1E9 2200 +50%,-50% 25 6 1000 -40 to +85
■ Equivalent Circuit
Input Output
GND
No polarity.
(1) (3)
(2)
■ Insertion Loss Characteristics
0
10
20
30
40
501 10 100 1000 2000
Frequency (MHz)
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE31PT220R1E9
NFE31PT470C1E9
Insertion Loss (dB)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
122
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NFE61P Series
The chip "EMIFIL" NFE61P is a T-type circuit EMI
suppression filter.
■ Features
1. Its large rated current of 2A and low voltage drop
due to small DC resistance are suitable for DC
power line use.
2. The feedthrough capacitor realizes excellent high
frequency characteristics.
3. The structure incorporates built-in ferrite beads
which minimize resonance with surrounding circuits.
4. 33 to 4,700pF lineups can be used in signal lines.
2.6±0.3
6.8±0.5
0.7±0.20.7±0.2
1.6±0.3
1.6±0.3
(in mm)
(1) (2) (3)
NFE61P Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A)
Insulation Resistance
(min.)
(M ohm)
Operating Temperature Range
(°C)
NFE61PT330B1H9 33 +30%,-30% 50 2 1000 -25 to +85
NFE61PT680B1H9 68 +30%,-30% 50 2 1000 -25 to +85
NFE61PT101Z1H9 100 +30%,-30% 50 2 1000 -25 to +85
NFE61PT181B1H9 180 +30%,-30% 50 2 1000 -25 to +85
NFE61PT361B1H9 360 +20%,-20% 50 2 1000 -25 to +85
NFE61PT681B1H9 680 +30%,-30% 50 2 1000 -25 to +85
NFE61PT102E1H9 1000 +80%,-20% 50 2 1000 -25 to +85
NFE61PT472C1H9 4700 +80%,-20% 50 2 1000 -25 to +85
■ Equivalent Circuit
Input Output
GND
No polarity.
(1) (3)
(2)
■ Insertion Loss Characteristics
0
10
20
30
40
50
600.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
(50Ω - 50Ω)
NFE61PT181B1H9
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
123
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Part Numbering
(Part Number)
Chip Common Mode Choke Coils
eDimensions (LgW)
Code
0.85g0.65mm
1.25g1.0mm
2.0g1.2mm
3.2g1.6mm
2.0g1.0mm
2.5g2.0mm
5.0g3.6mm
5.0g5.0mm
Dimensions (LgW)
03025
0504
0805
1206
0804
1008
2014
2020
EIA
0N
11
21
31
2A
2H
5A
5B
qProduct ID
DL Chip Common Mode Choke Coils
Product ID
wStructure
W
M
P
Winding Type
Monolithic Type
Film Type
Code Structure
tCategory
A
N
R
Expressed by a letter.
Code Category
S
D
H
G
T
Magnetically Shielded One Circuit Type
Magnetically Shielded Two Circuit Type
Open Magnetic One Circuit Type
Magnetically Monolithic Type (sectional winding)
Magnetically Shielded One Circuit Low Profile Type
Code Type
!0Packaging
K
L
B
DLW5AH/DLW5BS/DLW5BT
All Series
All Series
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Code Packaging Series
2
3
4
Two Lines
Three Lines
Four Lines
Code Number of Signal Lines
L
Q
Z
Expressed by a letter.
Expressed by a letter.
Code Features
iFeatures
rType
yImpedance
Typical impedance at 100MHz is expressed by three figures. The
unit is in ohm (Ω). The first and second figures are significant
digits, and the third figure expresses the number of zeros which
follow the two figures.
uCircuit
S
M
H
Code Circuit
oNumber of Signal Lines
t
N
y
371
q
DL
u
S
r
S
e
21 2
o !0
L
w
W
i
Q
124
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Film Type DLP0NS/11S/31S Series
DLP0NS Series
■ Features
1. Small size and tight dimensional tolerance
Size: 0.85x0.65x0.45mm Tolerance: +-0.05mm
2. Useful impedance line-up from 67 ohm to 120 ohm
3. DLP0NS series enables noise suppression for
differential signal line without distortion
in high-speed signal transmission due to its
line impedance matching
■ Applications
Common mode noise suppression of high speed
differential signal lines for USB 2.0, IEEE1394,
LVDS
1. Note PCs
2. Cellular phones
3. Digital Still Cameras, Digital Video Cameras
(in mm)
0.27±0.1
0.45±0.05
0.85±0.05
0.65±0.05
: Electrode
(2)
(3)
(1)
(4)
0.5±0.1
0.20+0.05
-0.10
DLP0NS Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLP0NSN670HL2 67 ±20% 110 5 100 12.5 2.4 ±25%
DLP0NSN900HL2 90 ±20% 100 5 100 12.5 3.0 ±25%
DLP0NSN121HL2 120 ±20% 90 5 100 12.5 3.8 ±25%
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
1 10 100 1000 10000
1
10
100
1000
10000
Frequency (MHz)
Impedance (Ω)
Differential mode
Common mode
DLP0NSN121HL2
DLP0NSN900HL2
DLP0NSN670HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
125
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Transmission Characteristics (Typical)
1 10 100 1000 10000
0
5
10
15
20
Frequency (MHz)
Insertion Loss (dB)
DLP0NSN900HL2
DLP11S Series
■ Features
1. Small size and tight dimensional tolerance
Size: 1.25x1.0x0.82mm Tolerance: +-0.1mm
2. Useful impedance line-up from 67 ohm to 330 ohm
3. DLP11S series enables noise suppression for
differential signal line without distortion
in high-speed signal transmission due to its
high coupling
4. DLP11SN_HL2, DLP11SA series match with line
impedance
5. High Cutoff Frequency is suitable for high
speed differential signal line such as HDMI.
Cutoff Frequency: 6GHz (DLP11SA series)
■ Applications
Common mode noise suppression of high speed
differential signal lines for USB, IEEE1394, LVDS
1. Note PCs, PDAs
2. Cellular phones
3. Digital Still Cameras, Digital Video Cameras
1.0±0.1
1.25±0.1
0.82±0.1
0.3±0.1
(in mm)
0.55±0.1
0.25+0.1
-0.05
(1) (2)
(3)
(4)
DLP11S Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLP11SA350HL2 35 ±20% 170 5 100 12.5 0.9 ±25%
DLP11SA670HL2 67 ±20% 150 5 100 12.5 1.2 ±25%
DLP11SN670SL2 67 ±20% 180 5 100 12.5 1.3 ±25%
DLP11SA900HL2 90 ±20% 150 5 100 12.5 1.4 ±25%
DLP11SN900HL2 90 ±20% 150 5 100 12.5 1.5 ±25%
DLP11SN121SL2 120 ±20% 140 5 100 12.5 2.0 ±25%
DLP11SN161SL2 160 ±20% 120 5 100 12.5 2.7 ±25%
DLP11SN201HL2 200 ±20% 110 5 100 12.5 3.1 ±25%
DLP11SN241HL2 240 ±20% 100 5 100 12.5 3.5 ±25%
DLP11SN281HL2 280 ±20% 90 5 100 12.5 4.2 ±25%
DLP11SN331HL2 330 ±20% 80 5 100 12.5 4.9 ±25%
Operating Temperature Range: -40°C to 85°C
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
126
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
1
10
100
1000
1 10 100 1000 10000
Impedance (Ω)
Frequency (MHz)
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
Common mode
Differential mode
1
10
100
1000
10000
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Common mode
Differential mode
DLP11SN670SL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11SN201HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN331HL2
DLP11SN900HL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN670SL2
DLP11SN900HL2
DLP11SN121SL2
DLP11SN161SL2
■ Transmission Characteristics (Typical)
0
2
4
6
8
10 1 10 100 1000 10000
Insertion Loss (dB)
Frequency (MHz)
DLP11SA900HL2
20
15
10
5
0
1 10 1000100 10000
Frequency (MHz)
Insertion Loss (dB)
DLP11SN900HL2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
127
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DLP31S Series
DLP31S series is chip common mode choke coil that
realizes high impedance in a small size with ferrite
material technology and film processing technology.
DLP31S series has excellent performance at high
frequency range. It is suitable for differential
signal line application.
■ Features
1. Small size, low profile, SMD. 3.2x1.6x1.15mm
(Tolerance: +-0.15mm)
2. High common mode impedance (550 ohm at
100MHz typ.) in small size
3. DLP31S suppresses high frequency noise that was
unable to be suppressed with existing common mode
choke coils. Suitable for differential signal lines
like USB, because DLP31S does not provide distortion
to high speed signal transmission due to its high
coupling (coupling coefficient: 0.98 min.)
■ Applications
1. USB lines of PCs, peripheral equipment
2. LVDS lines of Note-PCs, LCDs
3. USB lines of digital AV equipment such as digital
cameras
(in mm)
3.2±0.15
(2.1)
1.6±0.15
0.3±0.2
(1)
(3)
(2)
(4)
0.7±0.2
1.15±0.15
DLP31S Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLP31SN121ML2 120 ±20% 100 16 100 40 2.0 max.
DLP31SN221ML2 220 ±20% 100 16 100 40 2.5 max.
DLP31SN551ML2 550 ±20% 100 16 100 40 3.6 max.
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
10 100
1000
10000
100
10
11000
1
DLP31SN551ML2
DLP31SN221ML2
DLP31SN121ML2
DLP31SN551ML2
DLP31SN221ML2
DLP31SN121ML2
Frequency (MHz)
(Common mode)
(Differential mode)
Impedance (Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
128
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
DLP2AD Series
■ Features
1. 2 components are included in 2.0x1.0mm size
2. Low profile: typ. 0.82mm
3. High common mode impedance characteristics
(max. 280 ohm, at 100MHz)
4. DLP2AD can suppress common mode noise without
damage to signal wave.
5. DLP2AD match with line impedance.
■ Applications
Common mode noise suppression of high speed
differential signal lines for USB, IEEE1394
LVDS, DVI, HDMI
1. Main board of personal computers, Note PCs
2. Printers, Scanners
3. LCD monitors
4. Game equipment
5. PC peripheral equipment
0.82±0.1
(in mm)
0.25±0.1 0.5±0.1
(1) (2) (3) (4)
(5) (6) (7) (8)
2.0±0.1
1.0±0.1
0.25±0.15
DLP2AD Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLP2ADN670HL4 67 ±20% 140 5 100 12.5 1.3 ±25%
DLP2ADN900HL4 90 ±20% 130 5 100 12.5 1.7 ±25%
DLP2ADN121HL4 120 ±20% 120 5 100 12.5 2.0 ±25%
DLP2ADN161HL4 160 ±20% 100 5 100 12.5 2.5 ±25%
DLP2ADN201HL4 200 ±20% 90 5 100 12.5 3.2 ±25%
DLP2ADN241HL4 240 ±20% 80 5 100 12.5 3.8 ±25%
DLP2ADN281HL4 280 ±20% 80 5 100 12.5 4.6 ±25%
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1)
(5) (6) (7) (8)
(2) (3) (4)
No polarity.
■ Impedance - Frequency
1 10 100 1000 10000
1
10
100
1000
10000
Frequency (MHz)
Impedance (Ω)
DLP2ADN281HL4
DLP2ADN281HL4
Differential mode
Common mode
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADN900HL4DLP2ADN670HL4
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADN900HL4
DLP2ADN670HL4
Continued on the following page.
Chip Common Mode Choke Coils Arrays Film Type DLP2AD/31D Series
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
129
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Transmission Characteristics (Typical)
20
15
10
5
0
1 10 100 1000 10000
Frequency (MHz)
Insertion Loss (dB)
DLP2ADN900HL4
DLP31D Series
DLP31D series is chip common mode choke coil array
which realizes high coupling and high impedance in a
small size with ferrite material technology and thin
film processing technology.
■ Features
1. 2 components are included in 3.2x1.6mm
2. Thin type 1.15mm
3. High common mode Impedance characteristics
(max. 440 ohm, at 100MHz)
4. DLP31D can suppress common mode noise without
damage to signal wave.
■ Applications
Common mode noise suppression of high speed
differential signal lines for USB, IEEE1394, LVDS
1. Main board of personal computers, note PCs
2. Printers, Scanners
3. LCD monitors
4. Game equipment
5. PC peripheral equipment
0.4±0.2
1.15±0.15
3.2±0.15
0.3±0.2
1.6±0.15
0.8±0.1
(in mm)
(5) (6) (7) (8)
(1) (2) (3) (4)
DLP31D Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLP31DN900ML4 90 ±20% 160 10 100 25 1.1 max.
DLP31DN131ML4 130 ±20% 120 10 100 25 1.6 max.
DLP31DN201ML4 200 ±20% 100 10 100 25 2.2 max.
DLP31DN321ML4 320 ±20% 80 10 100 25 3.5 max.
DLP31DN441ML4 440 ±20% 70 10 100 25 4.3 max.
Operating Temperature Range: -40°C to 85°C
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
130
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
(1)
(5) (6) (7) (8)
(2) (3) (4)
No polarity.
■ Impedance - Frequency
1
10
100
1000
10000
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Common mode
Differential mode
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN441ML4
DLP31DN441ML4
DLP31DN321ML4
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN
321
ML4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
131
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Monolithic Type DLM11G/2HG Series
DLM11G Series
Small size chip common mode choke coil.
Suitable for noise suppression at audio line for
mobile phone.
■ Features
1. Small size: 1.25x1.0x0.5mm
2. Noise suppression for personal mobile equipment
3. Enables suppression of both differential mode and
common mode noise.
Common mode impedance:
600 ohm at 100MHz (typ.)
Differential mode impedance:
1200 ohm at 100MHz (typ.)
4. Available for high density mounting (Narrow pitch)
■ Applications
1. Audio line for mobile phones
(Microphones, Speakers, Headphones)
2. Handsets
3. Personal mobile equipment
(PDAs, Digital still cameras, MD players)
: Electrode
(in mm)
1.25±0.15
0.65±0.1
0.35±0.15
0.2±0.15
1.0±0.15
0.5±0.1
(2)(1)
(3)(4)
DLM11G Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLM11GN601SZ2 600 ±25% 100 5 100 25 0.8 max.
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
1
10
100
1000
10000
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Differential Mode
Common Mode
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
132
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DLM2HG Series
DLM2HG Series is a high quality noise suppression
filter for headphone lines of high quality digital
music equipment.
■ Features
1. Low distortion in audio signal, low crosstalk
2. Effective in noise suppression both of common mode
and of differential mode
3. Small size, low profile, SMD 2.5x2.0x1.2mm
■ Applications
1. Headphone lines of digital music equipment such as
DVDs, MD players
2. Headphone lines of Note-PCs, PDAs
0.3±0.2
2.0±0.2
(in mm)
1.2±0.2
2.5±0.2
0.4±0.2 0.8±0.1
(1) (3) (5)
(2) (4) (6)
DLM2HG Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLM2HGN601SZ3 600 ±25% 100 16 100 100 0.40 max.
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
No polarity.
(5)(3)(1)
(6)(4)(2)
■ Impedance - Frequency
10000
1000
100
10
11 10 100
Frequency (MHz) 1000 10000
Impedance (Ω)
Differential Mode
Common Mode
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
133
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Wire Wound Type DLW21S/21H/31S Series
DLW21S Series
■ Features (DLW21S_SQ Series)
1. DLW21S series realizes small size and low profile.
2.0x1.2x1.2mm
2. High common mode impedance at high frequency
effects excellent noise suppression performance.
3. Various common mode impedance items of 67 to 370 ohm
can be used, considering noise level and signal
frequency.
4. DLW21S series enables noise suppression for
differential signal line without distortion in
high speed signal transmission due to its high
coupling.
5. Small dimension enables higher density packaging.
■ Applications
1. USB lines of PC, Peripheral equipment
2. LVDS lines of Note-PCs, LCDs
3. USB lines of Small digital AV equipment such as
digital cameras
2.0±0.2
(0.4)(0.4)
1.2±0.2
1.2±0.2
(0.45) (0.45)
(1) (2)
(3)(4)
(0.17)
(in mm)
DLW21S_SQ Series
■ Features (DLW21S_HQ Series)
1. Small size: 2.0x1.2x1.2mm
2. Common mode impedance items of 67, 90 and 120 ohm,
and they can be used for various differential
signal lines, DLW21SN_HQ series matches line
impedance of 100 ohm line.
3. DLW21SN(R)_HQ series can suppress noise for the
high-speed differential signal lines which are
used in digital AV interfaces, such as HDMI and DVI,
without damage to the signal wave.
4. In case of using electrostatic protection device
with DLW21SR_HQ series match with line impedance of
100 ohm line.
■ Applications
Common mode noise suppression of high speed
differential signal lines for HDMI, DVI, USB2.0,
IEEE1394, LVDS.
1. DVD Recorders
2. LCD TVs, LCD monitors
3. PCs
DLW21SR_HQ Series is suitable for receiver side of
HDMI interface line.
2.0±0.2
(0.4)(0.4)
1.2±0.2
1.2±0.2
(0.45) (0.45)
(1) (2)
(3)(4)
(0.17)
(in mm)
DLW21S_HQ Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLW21SN670SQ2 67 ±25% 400 50 10 125 0.25 max.
DLW21SN900SQ2 90 ±25% 330 50 10 125 0.35 max.
DLW21SN121SQ2 120 ±25% 370 50 10 125 0.30 max.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
134
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
Continued from the preceding page.
DLW21SN181SQ2 180 ±25% 330 50 10 125 0.35 max.
DLW21SN261SQ2 260 ±25% 300 50 10 125 0.40 max.
DLW21SN371SQ2 370 ±25% 280 50 10 125 0.45 max.
DLW21SN670HQ2 67 ±25% 320 20 10 50 0.31 max.
DLW21SN900HQ2 90 ±25% 280 20 10 50 0.41 max.
DLW21SN121HQ2 120 ±25% 280 20 10 50 0.41 max.
DLW21SR670HQ2 67 ±25% 400 20 10 50 0.25 max.
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1)
(4)
(2)
(3)
No polarity.
■ Impedance - Frequency
DLW21SN_SQ
10000
1000
100
10
1
0.11 10 100 1000
Frequency (MHz)
Impedance (Ω)
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
DLW21SN670SQ2
Common mode
Differential mode
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
DLW21SN670SQ2
DLW21SN_HQ
0.1
1
10
100
1000
10 100 1000
Frequency (MHz)
Impedance (Ω)
Common mode
Differential mode
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SR_HQ
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
0.1
1
10
100
1000
Common mode
Differential mode
DLW21SR670HQ2
DLW21SR670HQ2
■ Transmission Characteristics (Typical)
10
7
8
9
5
6
4
2
3
0
1
10 100 1000 10000
Frequency (MHz)
Insertion Loss (dB)
DLW21SN900HQ2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
135
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DLW21H Series
■ Features
1. Small size and low profile (2.0x1.2x0.9mm).
Excellent noise suppression for sets of small and
thin size.
2. High common mode impedance at high frequency
effects excellent noise suppression performance.
3. Various common mode impedance from 67 to 180 ohm
can be used, selected depending on noise level and
signal frequency.
4. Suitable for differential signal line like USB2.0,
IEEE1394 and LVDS, because DLW21H does not provide
distortion to high speed signal transmission due
to its high coupling. (USB2.0: DLW21HN900SQ2)
5. Small dimension enables higher density mounting
■ Applications
Common mode noise suppression of signal lines in high
speed and high density digital equipment such as PCs
and peripherals and telecommunications equipment.
(in mm)
1.2±0.22.0±0.2
0.9±0.1
(0.17)
(0.45)
(1) (2)
(0.45)
(4) (3)
(0.4)(0.4)
Electrode
Reference Value() :
DLW21H Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLW21HN670SQ2 67 ±25% 330 50 10 125 0.35 max.
DLW21HN900SQ2 90 ±25% 330 50 10 125 0.35 max.
DLW21HN121SQ2 120 ±25% 280 50 10 125 0.45 max.
DLW21HN181SQ2 180 ±25% 250 50 10 125 0.50 max.
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1)
(4)
(2)
(3)
No polarity.
■ Impedance - Frequency
0.1
1
10
100
1000
10000
Impedance (Ω)
1 10 100 1000
Frequency (MHz)
Common mode
Differential mode
DLW21HN670SQ2
DLW21HN121SQ2
DLW21HN900SQ2
DLW21HN670SQ2
DLW21HN121SQ2
DLW21HN900SQ2
DLW21HN181SQ2
DLW21HN181SQ2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
136
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DLW31S Series
■ Features
1. DLW31S realizes small size and low profile.
3.2x1.6x1.9mm.
2. High common mode impedance at high frequency
effects excellent noise suppression performance.
3. Various common mode impedance items of 90 to
2200 ohm can be used, considering noise level and
signal frequency.
4. DLW31S series enables noise suppression for
differential signal lines without distortion in
high speed signal transmission due to its high
coupling.
5. Small dimension enables higher density packaging.
■ Applications
1. USB lines of PCs, Peripheral equipment
2. LVDS lines of Note-PCs, LCDs
3.2±0.2
(0.6)(0.6)
1.9±0.2
(0.25)
1.6±0.2
(0.6) (0.6)
(1) (2)
(3)(4)
(in mm)
DLW31S Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLW31SN900SQ2 90 ±25% 370 50 10 125 0.3 max.
DLW31SN161SQ2 160 ±25% 340 50 10 125 0.4 max.
DLW31SN261SQ2 260 ±25% 310 50 10 125 0.5 max.
DLW31SN601SQ2 600 ±25% 260 50 10 125 0.8 max.
DLW31SN102SQ2 1000 ±25% 230 50 10 125 1.0 max.
DLW31SN222SQ2 2200 ±25% 200 50 10 125 1.2 max.
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
10000
1000
100
10
1
0.11 10 100 1000
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
Frequency (MHz)
Impedance (Ω)
Common mode
Differential mode
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
137
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Wire Wound Type for Large Current DLW5AH/5BS/5BT Series
DLW5AH/5BS Series
DLW5AH/5BS series is a high performance wound type
chip common mode choke coil.
■ Features
1. High impedance (max. of 4000ohm at 100MHz: DLW5AH)
enables great noise suppression.
2. Large rated current (max. of 5A) is suitable for
power line use.
3. DLW5AH/BS series does not damage high speed signal
due to high coupling common mode choke coil
structure.
4. Automatic mounting can be applied.
■ Applications
1. DC power lines in AC adapters of Portable equipment
2. DC power lines of DC-DC converters, battery chargers
(L) 5.0±0.3
(T) 4.3 max.
(W) 3.6±0.3 0.5 min.
0.45 min.
1.7
±0.3
(2)(1)
(4) (3)
1.7
±0.3
1.3
±0.3
1.3
±0.3
1.3
±0.3 0.9
±0.3 in mm
Starting position of wiring should
be covered with resin.
*
**
DLW5AH Series
(L) 5.0±0.3
(T) 4.5 max.
3.6±0.3
(W) 5.0±0.3 0.5 min.
0.45 min.
1.7
±0.3
(2)(1)
(4) (3)
1.7
±0.3
1.3
±0.3
1.3
±0.3
1.3
±0.3 0.9
±0.3 in mm
DLW5BS Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLW5AHN402SQ2 4000 (Typ.) 200 50 10 125 3.0 max.
DLW5BSN191SQ2 190 (Typ.) 5000 50 10 125 0.02 max.
DLW5BSN351SQ2 350 (Typ.) 2000 50 10 125 0.04 max.
DLW5BSN102SQ2 1000 (Typ.) 1500 50 10 125 0.06 max.
DLW5BSN152SQ2 1500 (Typ.) 1000 50 10 125 0.1 max.
DLW5BSN302SQ2 3000 (Typ.) 500 50 10 125 0.3 max.
Operating Temperature Range: -25°C to 85°C
In operating temperature exceeding +75°C, derating of current is necessary for DLW5BSN191SQ2.
Please refer to p.138, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
138
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
100000
10000
1000
100
101 10 100 1000
Frequency (MHz)
Impedance (Ω)
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
Common mode
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
Differential mode
■ Derating of Rated Current
DLW5BSN191
4.5
4.75
5
0 10 20 30 40 50 60 70 80
75°C 85°C90 100
Rated Current (A)
Operating Temperature (°C)
DLW5BSN191SQ2 Temperature Derating
DLW5BT Series
Low profile (h=2.5mm) chip common mode choke coil.
Suitable for noise suppression at DC power lines.
■ Features
1. Low profile (h=2.5mm)
2. Small size (5.0x5.0mm) and high rated current
(1.5 to 6A)
3. High common mode Impedance
(max. 1400 ohm, at 100MHz)
■ Applications
Noise suppression for power line
1. Power line equipment
-DC-DC converters
-Battery chargers
2. Portable equipment
-PDAs (Personal Digital Assistants)
-Note PCs
-Printers
(in mm)
0.5 min.
(W) 5.0±0.3
3.6±0.3
1.7±0.3 1.3±0.3 1.7±0.3
1.3±0.3 1.3±0.3
0.9±0.3
(L) 5.0±0.3
0.45 min.
(T) 2.35±0.15
(4)
(2)(1)
(3) : Electrode
DLW5BT Series
Part Number Common Mode Impedance
(at 100MHz/20 degree C)
(ohm)
Rated Current
(mA) Rated Voltage
(Vdc)
Insulation Resistance
(min.)
(M ohm)
Withstand Voltage
(Vdc) DC Resistance
(ohm)
DLW5BTN101SQ2 100 (Typ.) 6000 50 10 125 0.009 ±40%
DLW5BTN251SQ2 250 (Typ.) 5000 50 10 125 0.014 ±40%
DLW5BTN501SQ2 500 (Typ.) 4000 50 10 125 0.019 ±40%
DLW5BTN102SQ2 1000 (Typ.) 2000 50 10 125 0.024 ±40%
DLW5BTN142SQ2 1400 (Typ.) 1500 50 10 125 0.040 ±40%
In operating temperature exceeding +60°C, derating of current is necessary for DLW5BTN101/251/501.
Please refer to p.139, "Derating of Rated Current".
Operating Temperature Range: -25°C to 85°C
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
139
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Impedance - Frequency
1
10
100
1000
10000
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Common mode
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2 Differential mode
■ Derating of Rated Current
DLW5BTN101/251/501
0
1000
2000
3000
4000
5000
6000
7000
0 20 40 60 80 100
Current (mA)
Temperature (°C)
65
4750
3400
85
DLW5BTN101
DLW5BTN251
DLW5BTN501
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
140
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Block Type EMIFILr BNX Series
SMD Type
BNX022 series is SMD type high performance and
provides excellent noise suppression on DC power
lines.
■ Features
1. Large rated current (10A-15A) and Low DC Resistance.
(0.43m ohm - Typ.)
2. High insertion loss characteristic over a wide
frequency range of 1MHz to 1GHz.
3. Mounting area and volume is reduced.
4. Effective for impulse noise such as electro-
static discharge or spike noise.
■ Applications
1. Displays (PDP/LCD-TV)
2. Digital AV equipment
3. Amusement equipment
4. PC peripheral equipment
5. Industry equipment, measurement equipment,
power supplies
BNX022
12.1±0.2
9.1±0.2
1.6±0.3
4.2±0.3 (2.45)
1.3±0.2
0.3±0.1
0.3±0.1
7.0±0.2
2.5±0.2
1.55±0.2
1.55±0.2
1.0±0.3
3.1±0.2
1.05±0.2
(1) (2)
(3) (4)
(1)
(3) (4)
(2)
(4)
(4)
(1) (3) (4) (2)
: Electrode
(in mm)
BNX022/023
Part Number Rated
Voltage
(Vdc)
Withstand
Voltage
(Vdc)
Rated
Current
(A)
Insulation
Resistance (min.)
(M ohm) Insertion Loss
BNX022-01 50 125 10 500 1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX023-01 100 250 15 500 1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm)
Operating Temperature Range: -40°C to 125°C
In operating temperatures exceeding +85°C, derating of current is necessary.
Please refer to p.141, "Derating of Rated Current".
■ Equivalent Circuit
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
■ Insertion Loss Characteristics
1 10 100
0
20
40
60
80
1000.1 0.5 5 50050 1000
Frequency (MHz)
Insertion Loss (dB)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
141
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Derating of Rated Current
In operating temperatures exceeding +85°C, derating of
current is necessary for BNX022 series. Please apply the
derating curve shown in chart according to the operating
temperature.
10
0
1
85-40 125
Operating Temperature (°C)
Derated Current (A)
Derating
In operating temperatures exceeding +85°C, derating of
current is necessary for BNX023 series. Please apply the
derating curve shown in chart according to the operating
temperature.
15
0
1
85-40 125
Operating Temperature (°C)
Derated Current (A)
Derating
Lead Type
The block type "EMIFIL" BNX series incorporates
through-type capacitor, monolithic chip capacitors and
bead. The BNX is high performance for use in DC power
circuits.
■ Features
1. The filter enables obtaining high insertion loss in
wide frequency ranges from 0.5MHz to 1GHz.
2. Effective for impulse noise such as electrostatic
discharge or spike noise.
3. There are no connection routes in the current
circuits, thus ensuring highly reliable performance.
■ Applications
1. Displays (PDP/LCD-TV)
2. Digital AV equipment
3. Amusement equipment
4. PC peripheral equipment
5. Industry equipment
ø0.8
3.5±1.0
7.5±0.2 2.5±0.2
12.0±0.5
13 max.
5.0±0.5
18 max.
0.8
±0.1
11.0±0.5
ø0.8 ø0.8
0.6
±0.1
2.5±0.2 2.5±0.2
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
BNX002/003
(in mm)
ø1.0
3.5±1.0
7.5±0.2 2.5±0.2
12.0±0.5
13.5 max.
5.0±0.5 18.5 max.
0.8
±0.1
11.0±0.5
ø1.0 ø1.0
0.6
±0.1
2.5±0.2 2.5±0.2
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
BNX005
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
142
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated
Voltage
(Vdc)
Withstand
Voltage
(Vdc)
Rated
Current
(A)
Insulation
Resistance (min.)
(M ohm) Insertion Loss
BNX002-01 50 125 10 100 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX003-01 150 375 10 100 5MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX005-01 50 125 15 100 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
Operating Temperature Range: -30°C to 85°C
■ Equivalent Circuit
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
■ Insertion Loss Characteristics
0
0.001 0.01 0.1 1 10 100 1000
BNX002-01
(BNX005-01)
BNX003-01
100
80
60
40
20
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
Lead Type Low Profile
The block type "EMIFIL" BNX010 series is high
performance and BNX series provide excellent noise
suppression on DC power lines.
■ Features
1. High insertion loss characteristic over a wide
frequency band range.
1MHz to 1GHz: 40dB min (BNX012)
100kHz to 1GHz: 40dB min (BNX016)
2. Large rated current (15A) and Low Rdc
(0.8m ohm-typ.)
3. Low profile (height: 8.0mm except lead terminal)
4. Effective for impulse noise such as electrostatic
discharge or spike noise.
■ Applications
1. Displays (PDP/LCD-TV)
2. Digital AV equipment
3. Amusement equipment
4. PC peripheral equipment
5. Industry equipment
12.0±0.2
8.0±0.5
4.0±0.5
2.5±0.2
0.6
±0.1
ø0.8
±0.1 ø0.8
±0.1
0.8
±0.1
0.8
±0.1
2.5±0.2
7.5±0.2
11.0±0.2
12.0±0.5
3.2±0.5
BNX***
*** : 012/016
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
BNX012
12.0±0.2
8.0±0.5
4.0±0.5
2.5±0.2
0.6
±0.1
ø0.8
±0.1 ø0.8
±0.1
0.8
±0.1
0.8
±0.1
2.5±0.2
7.5±0.2
11.0±0.2
12.0±0.5
3.2±0.5
BNX***
*** : 012/016
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
BNX016
Part Number Rated
Voltage
(Vdc)
Withstand
Voltage
(Vdc)
Rated
Current
(A)
Insulation
Resistance (min.)
(M ohm) Insertion Loss
BNX012-01 50 125 15 500 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX016-01 25 62.5 15 50 100kHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
Operating Temperature Range: -40°C to 125°C
In operating temperatures exceeding +85°C, derating of current is necessary.
Please refer to p.143, "Derating of Rated Current".
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
143
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
■ Insertion Loss Characteristics
90
80
70
60
50
40
30
20
10
0
0.001 0.01 0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
BNX012-01
BNX016-01
■ Notice
" Rating
In operating temperatures exceeding +85°C, derating of
current is necessary for BNX01p series. Please apply the
derating curve shown in chart according to the operating
temperature.
15
10
5
0
1
85-40 125102.5 120
Operating Temperature (°C)
Derated Current (A)
BNX012-01
BNX016-01
Derating
" Connecting ± power line
In case of using ± power line, please connect to each
terminal as shown.
Power Supply
(BNX Input) CircuitBNX
PSG
BCG
CB
PSG
BCG
CB
Power Supply Ground
Power Supply +Bias
Power Supply Ground
Power Supply -Bias
(BNX Output)
Load Circuit Ground
Load Circuit +Bias
Load Circuit Ground
Load Circuit -Bias
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Noise Suppression Effect of BNX Series
!Suppression of DC Side
Ripple of the Switching Power Supply
!Example of Impulse Noise Suppression
Type of Filter
When BNX002 is not used
Without filter
When BNX002 is used.
When BNX002 is used
EMI Suppression Effect
Type of Filter EMI Suppression Effect
Description
High frequency noise, max. 0.5V, can
be seen.
Noise can be almost suppressed by
BNX002.
+5.0V →
50µs/div
0.2V/div
Impulse Noise
2000V/50ns
Y-axis: 500V/div
X-axis: 10ns/sec
Y-axis: 500V/div
X-axis: 10ns/sec
+5.0V →
50µs/div
0.2V/div
Testing Circuit
BNX002-01
Switching
Power Supply
+5V
CG
Noise Suppression Effect of BNX Series
144
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
145
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Ferrite Beads Inductors Part Numbering
(Part Number)
Ferrite Beads Inductors
eBeads Core Material
Code
Standard Type
Beads Core Material
RN
qProduct ID
BL Ferrite Beads Inductors
Product ID
wSeries
01
02
03
Beads ø3.6
Beads ø3.4
Beads ø2.3 max.
Code Series
tLead Type
A1
A2
R1
R2
R3
Axial Straight Type
Axial Crimp Type
Radial Straight Type
Radial Straight and Wave Formed Leads Type
Radial Incrimp Type
Code Lead Type
iPackaging
A
B
J
BL01/BL02/BL03
All Series
BL01
Ammo Pack
Bulk
Paper Reel (ø320mm)
Code Packaging Series
BL01
BL01
BL02/BL03
BL02
BL02
Series
uLead Diameter
1
2
ø0.60mm
ø0.65mm
Code Lead Diameter
rNumbers of Beads Core
Code
1
2
Numbers of Beads Core
1
2
yLead Length, Space
A
D
E
F
J
M
N
P
Q
Bulk, Axial Type, 3.7mm
Bulk, Axial Type, 45.0mm
Taping Axial Type, 26.0mm
Taping, Axial Type, 52.0mm
Bulk, Radial Type, 5.0mm
Bulk, Radial Type, 10.0mm
Taping, Radial Type, 16.5mm
Taping, Radial Type, 18.5mm
Taping, Radial Type, 20.0mm
Code Lead Length, Space Series
t
R1
y
M
q
BL
r
2
e
RN
w
02
u
2
i
B
BL01
BL02/BL03
146
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Ferrite Beads Inductors BL01/02/03 Series
BL01/BL02/BL03 Series
■ Features
BL01/02/03 series are ferrite beads with lead wires to
produce a high frequency loss for suppression of
noise. Simple construction and easy-to-use, effective
for low impedance circuits such as power supplies and
grounds. Effective also for preventing overshoot and
undershoot of digital signal in clocks or the like,
and suppressing the higher harmonic wave. Suitable for
prevention of abnormal oscillation at high frequency
amplifying circuit.
ø3.6±0.15
20 min. 5.0±0.3 20 min.
45 min.
ø0.65
(in mm)
∗Coating extending on leads : 1.5 max.
∗ ∗
BL01RN1A1D2B
ø0.65
10±1.0
3.7±1.0
ø3.6±0.15
5.0±0.3
(in mm)
∗Coating extending on leads : 1.5 max.
∗ ∗
BL01RN1A2A2B
(in mm)
7.5 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
∗There is excess bond stick on the wire.
∗
∗
BL02RN1R2M2B
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
∗There is excess bond stick on the wire.
∗
8.0 max. ø3.4±0.2
ø0.65
(in mm)
∗
BL02RN1R3J2B
(in mm)
9.0 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
BL02RN2R1M2B
ø0.65
(in mm)
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
9.0 max. ø3.4±0.2
BL02RN2R3J2B
(in mm)
8.3 max. ø2.3 max.
5.0±0.8 ø0.60
6.5 max.10.0±1.0
15.0 min.
BL03RN2R1M1B
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
147
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Rated Current
(A)
Operating
Temperature Range
(°C)
BL01RN1A1D2B 7 -40 to +85
BL01RN1A1E1A 6 -40 to +85
BL01RN1A1F1J 6 -40 to +85
BL01RN1A2A2B 7 -40 to +85
BL02RN1R2M2B 7 -40 to +85
BL02RN1R2N1A 6 -40 to +85
BL02RN1R2P1A 6 -40 to +85
BL02RN1R2Q1A 6 -40 to +85
BL02RN1R3J2B 7 -40 to +85
BL02RN1R3N1A 6 -40 to +85
BL02RN2R1M2B 7 -40 to +85
BL02RN2R1N1A 6 -40 to +85
BL02RN2R1P1A 6 -40 to +85
BL02RN2R1Q1A 6 -40 to +85
BL02RN2R3J2B 7 -40 to +85
BL02RN2R3N1A 6 -40 to +85
BL03RN2R1M1B 6 -40 to +85
BL03RN2R1N1A 6 -40 to +85
BL03RN2R1P1A 6 -40 to +85
BL03RN2R1Q1A 6 -40 to +85
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
■ Impedance - Frequency Characteristics
BL01RN1
R
X
Z
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
BL02RN1
X
R
Z
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
Continued on the following page.
Please refer to p.193, "Ferrite Beads Inductors Packaging" for Dimensions of Part Numbers except 'B' for the last code.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
148
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance - Frequency Characteristics
BL02RN2
X
RZ
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
BL03RN2
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
X
R
Z
Impedance (Ω)
Frequency (MHz)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
149
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr Part Numbering
(Part Number)
Disc Type EMIFILr
eStyle
Code
Diameter 8.0mm max.
Diameter 12.0mm max.
Style
6
9
qProduct ID
DS Three-terminals Capacitor
Product ID
wStructure
N
S
T
No Ferrite Beads Type
Built-in Ferrite Beads Type
with Ferrite Beads Type
Code Structure
tTemperature Characteristics
B3/P3
C5
T3
E5
F3
Z8
±10% (Temperature Range: -25˚C to +85˚C)
±22% (Temperature Range: -25˚C to +85˚C)
+20/-30% (Temperature Range: -25˚C to +85˚C)
+22/-56% (Temperature Range: -25˚C to +85˚C)
+30/-80% (Temperature Range: -25˚C to +85˚C)
+30/-85% (Temperature Range: -10˚C to +60˚C)
Code Capacitance Change
iLead Type/oPackaging
Q55B
Q50B
Q52B
Q54B
Q56B
T41B
T51B
Q91J
Q92J
Q93J
Q91A
Q92A
Q93A
U21A
U31A
All series
All series except DSS9N/H
DSS6N
DST9N/H
DST9N
DSS9N/H
DSp6N, DSN9N/H
DSN6N/9N, DSS6N/9N, DSS9H
DSS6N
25.0 min.
4.0±0.5
6.0±1.0
4.0±0.5
6.0±1.0
4.0±0.5
25.0 min.
20.0±1.0
16.5±1.0
18.5±1.0
20.0±1.0
16.5±1.0
18.5±1.0
16.5±1.0
18.5±1.0
Code Lead Length* (in mm)
Bulk
Paper Reel (ø320mm)
Ammo Pack
Packaging
Straight
Incrimp
Straight
Incrimp
Lead Type Series
yRated Voltage
1C
1H
2A
2E
16V
50V
100V
250V
Code Rated Voltage
rCategory
Code
for General Use
for Heavy-duty
Category
N
H
uCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
t
B3
y
2E
q
DS
u
271
r
H
e
9B
o
w
S
i
Q55
*Lead Distance between Reference and Bottom Planes except Bulk.
150
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr DSN6/DSS6 Series
■ Features
DS_6 is a compact, high performance lead type EMI
suppression filter which can be mounted 2.54mm pitch.
Its three terminal structure enables precise high
frequency performance.
(in mm)
7.0 max.
GND
I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
2.54 max.
8.0 max.
5.0±0.5
2.5±0.5
I
ø0.6
DSN6_Q55B Series
(in mm)
8.0 max. 2.54 max.
*2
*1
*1 There may be a hole on the top of ferrite beads,
which causes no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
7.0 max.
5.0±0.5
2.5±0.5
I
ø0.6
I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
GND
DSS6_Q55B Series
Straight Type (in mm)
8.0 max.
GND
I
T51 Type: 25.0 min.
T41 Type: 4.0±0.5
2.54 max.
5.0±0.5
2.5±0.5
I
ø0.6
10.0 max.
*1 There may be a hole on the top of ferrite beads,
which causes no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
*1
*2
DSS6_T51B Series
Incrimp Type
DSN6 Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSN6NC51H220 22 +20%,-20% 50 6 -25 to +85
DSN6NC51H330 33 +20%,-20% 50 6 -25 to +85
DSN6NC51H470 47 +20%,-20% 50 6 -25 to +85
DSN6NC51H101 100 +20%,-20% 50 6 -25 to +85
DSN6NC51H271 270 +20%,-20% 50 6 -25 to +85
DSN6NC51H102 1000 +20%,-20% 50 6 -25 to +85
DSN6NC51H222 2200 +20%,-20% 50 6 -25 to +85
DSN6NZ81H103 10000 +80%,-20% 50 6 -25 to +85
Please refer to Part Numbering for Type and Length of Lead.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
151
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
1
0
20
40
60
80
100
120 1 10 100 10000.1
2
345
Frequency (MHz)
Insertion Loss (dB)
1: 22pF
2: 33pF
3: 47pF
4: 100pF
5: 270pF
6:1000pF
7: 2200pF
8: 10000pF
8 7 6
(50Ω - 50Ω)
Built-in Ferrite Beads DSS6 Series Straight Type
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSS6NC52A220 22 +20%,-20% 100 6 -25 to +85
DSS6NC52A330 33 +20%,-20% 100 6 -25 to +85
DSS6NC52A470 47 +20%,-20% 100 6 -25 to +85
DSS6NC52A101 100 +20%,-20% 100 6 -25 to +85
DSS6NC52A151 150 +20%,-20% 100 6 -25 to +85
DSS6NC52A221 220 +20%,-20% 100 6 -25 to +85
DSS6NC52A271 270 +20%,-20% 100 6 -25 to +85
DSS6NC52A471 470 +20%,-20% 100 6 -25 to +85
DSS6NC52A102 1000 +20%,-20% 100 6 -25 to +85
DSS6NE52A222 2200 +80%,-20% 100 6 -25 to +85
DSS6NZ82A103 10000 +30%,-30% 100 6 -25 to +85
DSS6NF31C223 22000 +80%,-20% 16 6 -25 to +85
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
21
348
0
20
40
60
80
100
120 1 10 100 1000
9101112
7
0.1
5
6
Frequency (MHz)
Insertion Loss (dB)
1: 22pF
2: 33pF
3: 47pF
4: 100pF
5: 150pF
6: 220pF
7: 270pF
8: 470pF
9: 1000pF
10: 2200pF
11: 10000pF
12: 22000pF
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
152
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Built-in Ferrite Beads DSS6 Series Incrimp Type
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSS6NC52A220 22 +20%,-20% 100 6 -25 to +85
DSS6NC52A330 33 +20%,-20% 100 6 -25 to +85
DSS6NC52A470 47 +20%,-20% 100 6 -25 to +85
DSS6NC52A101 100 +20%,-20% 100 6 -25 to +85
DSS6NC52A151 150 +20%,-20% 100 6 -25 to +85
DSS6NC52A221 220 +20%,-20% 100 6 -25 to +85
DSS6NC52A271 270 +20%,-20% 100 6 -25 to +85
DSS6NC52A471 470 +20%,-20% 100 6 -25 to +85
DSS6NC52A102 1000 +20%,-20% 100 6 -25 to +85
DSS6NE52A222 2200 +80%,-20% 100 6 -25 to +85
DSS6NZ82A103 10000 +30%,-30% 100 6 -25 to +85
DSS6NF31C223 22000 +80%,-20% 16 6 -25 to +85
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
1
2
345
0
20
40
60
80
100
120 1 10 100 10000.1
9101112
67
8
Frequency (MHz)
Insertion Loss (dB)
1: 22pF
2: 33pF
3: 47pF
4: 100pF
5: 150pF
6: 220pF
7: 270pF
8: 470pF
9: 1000pF
10: 2200pF
11: 10000pF
12: 22000pF
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
153
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr Broad Type DSN9/DSS9/DST9 Series
■ Features
DS_9 is a basic type EMI suppression filter which can
obtain high insertion loss in a wide frequency range.
Its three terminal structure enables precise high
frequency performance. DSS9NP32A222/DSS9NT31H223 are
low distortion types for audio circuits.
■ Supplement
Diameter of lead is 0.6mm for taping type.
Taping type is three terminal in-line arrangement. (in mm)
4.0 max.
9.5 max.
1.0±0.5
10.0 max.I
1.5 max.
5.0±0.5
2.5±0.5
ø0.65
I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
GND
DSN9N_Q55B
(in mm)
7.5 max.
12.0 max.
GND I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
2.5±0.5
10.5 max.I
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
*1
1.5 max.
*1 Coating extending on leads does not exceed the tangent line.
Exposed electrode, if any, is covered by solder, etc.
*2 There should not be the exposure of the ferrite bead if a hole
is in top of filter, the ferrite bead should not be exposed.
*2
DSS9N_Q55B
(in mm)
4.0 max.
9.5 max.
GND Q55 Type: I=25.0 min.
Q50 Type: I1=4.0±0.5
1.25±0.5
15.5 max.
I
I1
1.5 max.
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
DST9N_Q55B
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
154
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DSN9 Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSN9NC52A271 270 +20%,-20% 100 7 -25 to +85
DSN9NC52A222 2200 +20%,-20% 100 7 -25 to +85
DSN9NC51H223 22000 +50%,-20% 50 7 -25 to +85
DSN9NC51C104 100000 +20%,-20% 16 7 -25 to +85
Rated current is 6A for taping type and its lead diameter is phi 0.6mm.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
0.01 0.1 1 10 100 1000
0
20
40
60
80
100
Insertion Loss (dB)
Frequency (MHz)
270pF
2200pF
22000pF
100000pF
(50Ω - 50Ω)
Built-in Ferrite Beads DSS9 Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSS9NC52A220 22 +20%,-20% 100 7 -25 to +85
DSS9NC52A470 47 +20%,-20% 100 7 -25 to +85
DSS9NC52A101 100 +20%,-20% 100 7 -25 to +85
DSS9NC52A271 270 +20%,-20% 100 7 -25 to +85
DSS9NC52A222 2200 +20%,-20% 100 7 -25 to +85
DSS9NP32A222 2200 +20%,-20% 100 7 -25 to +85
DSS9NC51H223 22000 +50%,-20% 50 7 -25 to +85
DSS9NT31H223 22000 +50%,-20% 50 7 -25 to +85
Rated current is 6A for taping type and its lead diameter is phi 0.6mm.
DSS9NP32A222/DSS9NT31H223 are low distortion types for audio IF circuits.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
100pF
0.01 0.1 1 10 100 1000
0
20
40
60
80
100
Insertion Loss (dB)
Frequency (MHz)
47pF
22pF
270pF
2200pF(DSS9NB32A222)
2200pF(DSS9NP32A222)
22000pF(DSS9ND31H223)
22000pF(DSS9NT31H223)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
155
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
With Ferrite Beads DST9 Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DST9NC52A271 270 +20%,-20% 100 7 -25 to +85
DST9NC52A222 2200 +20%,-20% 100 7 -25 to +85
DST9NC51H223 22000 +50%,-20% 50 7 -25 to +85
Rated current is 6A for taping type and its lead diameter is phi 0.6mm.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
0.01 0.1 1 10 100 1000
0
20
40
60
80
100
Insertion Loss (dB)
Frequency (MHz)
270pF
2200pF
22000pF
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
156
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr Heavy-duty Type DSN9H/DSS9H/DST9H Series
■ Features
DS_9H is a basic type EMI suppression filter which can
obtain high insertion loss in a wide frequency range.
Its three terminal structure enables nice high
frequency performance. High rated voltage of 250Vdc
and wide operating temperature range from -40 degrees C
to 105 degrees C are suitable for high reliability
circuits.
■ Supplement
Diameter of lead is 0.6mm for taping type.
Taping type is three terminal in-line arrangement.
(in mm)
4.0max
9.5max
1.0±0.5
10.0max25.0min
1.5max
5.0±0.5
2.5±0.5
ø0.65
DSN9H_Q55B
(in mm)
7.5 max.
12.0 max.
GND I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
2.5±0.5
10.5 max.I
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
*1
1.5 max.
*1 Coating extending on leads does not exceed the tangent line.
Exposed electrode, if any, is covered by solder, etc.
*2 There should not be the exposure of the ferrite bead if a hole
is in top of filter, the ferrite bead should not be exposed.
*2
DSS9H_Q55B
(in mm)
4.0 max.
9.5 max.
GND Q55 Type: I=25.0 min.
Q50 Type: I1=4.0±0.5
1.25±0.5
15.5 max.
I
I1
1.5 max.
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
DST9H_Q55B
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
157
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DSN9H Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSN9HB32E220 22 +20%,-20% 250 6 -40 to +105
DSN9HB32E101 100 +20%,-20% 250 6 -40 to +105
DSN9HB32E271 270 +20%,-20% 250 6 -40 to +105
DSN9HB32E222 2200 +20%,-20% 250 6 -40 to +105
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
0.1 1 10 100 1000
0
20
40
60
80
100
120
Frequency (MHz)
Insertion Loss (dB)
22pF
100pF
2200pF 270pF
(50Ω - 50Ω)
Built-in Ferrite Beads DSS9H Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DSS9HB32E220 22 +20%,-20% 250 6 -40 to +105
DSS9HB32E101 100 +20%,-20% 250 6 -40 to +105
DSS9HB32E271 270 +20%,-20% 250 6 -40 to +105
DSS9HB32E222 2200 +20%,-20% 250 6 -40 to +105
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
0.1 1 10 100 1000
0
20
40
60
80
100
120
Frequency (MHz)
Insertion Loss (dB)
22pF
100pF
2200pF
270pF
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
158
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
With Ferrite Beads DST9H Series
Part Number Capacitance
(pF) Rated Voltage
(Vdc) Rated Current
(A) Operating Temperature Range
(°C)
DST9HB32E220 22 +20%,-20% 250 6 -40 to +105
DST9HB32E101 100 +20%,-20% 250 6 -40 to +105
DST9HB32E271 270 +20%,-20% 250 6 -40 to +105
DST9HB32E222 2200 +20%,-20% 250 6 -40 to +105
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity.
■ Insertion Loss Characteristics
0.1 1 10 100 1000
0
20
40
60
80
100
120
Frequency (MHz)
Insertion Loss (dB)
22pF
100pF
2200pF
270pF
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
159
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Lead Type EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
(Part Number)
Lead Type EMIGUARDr (EMIFILr with Varistor Function)
qProduct ID
VF EMIGUARDr Lead Type
Product ID
wStructure
S
R
Built-in Ferrite Beads Type
with Resistance
Code Structure
uCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
yRated Voltage
1E
1B
25V
12V
Code Rated Voltage
rFeatures
Code
with Varistor Function
Features
V
tTemperature Characteristics
Code
+20/-30% (Temperature Range: -40˚C to +105˚C)
+20/-30% (Temperature Range: -25˚C to +85˚C)
Capacitance Change
D8
D3
iLead Type/oPackaging
T51B
U31A
Q55B
Q91J
Q92J
Q93J
VFS9
VFR3/VFS6Incrimp
Straight
Code Lead Type
25.0mm min.
18.5+/-1.0mm
25.0mm min.
20.0+/-1.0mm
16.5+/-1.0mm
18.5+/-1.0mm
Lead Length*
Bulk
Ammo Pack
Bulk
Paper Reel (ø320mm)
Packaging Series
eStyle
3
6
9
Size is expressed by a figure
Code Style
t
D8
y
1E
q
VF
r
V
e
6
w
S
u
221
i
T51
o
B
*Lead Distance between Reference and Bottom Planes except Bulk.
160
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Lead Type EMIGUARDr (EMIFILr with Varistor Function) VFR3V/VFS6V/VFS9V Series
for Semiconductor Protection VFR3V Series
■ Features
VFR3V series is designed for ESD surge protection
of IC. It efficiently absorbs ESD surges rushed into
IC's I/O terminal.
■ Applications
Elimination of noise and protection of semiconductors
in office equipment, including computers and
peripheral equipment, copy machines, and communication
terminals. (in mm)
No.1 Pin Indicator
(Surge entrance side)
5.0±0.5
2.5±0.5
8.0 max.
(1) (3)(2)
25.0 min.
ø0.45±0.1
5.0 max.
2.3 max.
VFR3V Series
Part Number Rated
Voltage
(Vdc)
Varistor Voltage
(Vdc) Capacitance
(pF)
Rated
Current
(mA)
Peak
Pulse Current
(A)
Operating
Temperature Range
(°C)
VFR3VD31E131 25 50 +20%,-20% 130 +20%,-20% 20 30 -25 to 85
Please refer to Part Numbering for Type and Length of Lead.
■ Insertion Loss Characteristics
0
10
30
40
50
705 10 100 1000
20
60
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
161
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Signal-Line VFS6V Series
■ Features
VFS6V series is designed for surge protection of
signal line. It protects electric circuit from surges
such as static electricity and suppresses EMI noise.
Built-in ferrite bead gives excellent EMI suppression.
■ Applications
Elimination of noise and protection of electric
circuits in office equipment, including computers and
peripheral equipment, copy machines, and
communication terminals.
(in mm)
8.0 max. 2.54 max.
5.0±0.5
2.5±0.5
25.0 min.
ø0.6
10.5 max.
GND
*1
*2
*1 There may be a hole on the top of ferrite beads,
which causes no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
VFS6V Series
Part Number Rated
Voltage
(Vdc)
Varistor Voltage
(Vdc) Capacitance
(pF)
Rated
Current
(A)
Peak
Pulse Current
(A)
Operating
Temperature Range
(°C)
VFS6VD81E221 25 50 +20%,-20% 220 +20%,-20% 6 100 -40 to 105
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity
■ Insertion Loss Characteristics
0
20
40
60 100.010.0 1000.0
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
162
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Large-Current VFS9V Series
■ Features
VFS9V series is designed for surge protection of
the power supply. It protects electric circuits from
surge such as static electricity and suppresses EMI
noise. Its large capacitance value enables high
insertion loss for EMI noise.
■ Applications
For circuit protection and noise suppression in
electronics equipment such as computers and DC motors,
and in electronics systems installed in cars such as
car audio equipment and engine controllers.
■ Supplement
Diameter of lead is 0.6mm for taping type.
Taping type is three terminal in-line arrangement.
(in mm)
7.5 max.
12.0 max.
GND
2.5±0.5
10.5 max.25.0 min.
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
*1
1.5 max.
*2
*1 Coating extending on leads does not exceed the tangent line.
Exposed electrode, if any, is covered by solder, etc.
*2 If there is a hole in the top of the filter, the ferrite bead should not
be exposed.
VFS9V Series
Part Number Rated
Voltage
(Vdc)
Varistor Voltage
(Vdc) Capacitance
(pF)
Rated
Current
(A)
Operating
Temperature Range
(°C)
VFS9VD31B223 12 22 +20%,-20% 22000 +50%,-20% 7 -40 to 100
Rated current is 7A for bulk type and 6A for taping type.
Rated current of taping type is 6A because diameter of lead is 0.6mm and its lead layout is in-line type.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
GND
No polarity
■ Insertion Loss Characteristics
0
20
40
60
80
1000.1 0.5 5 50 5001 10 100 1000
Frequency (MHz)
Attenuation (dB)
(50Ω - 50Ω)
■ Voltage - Current Characteristics
Voltage (V)
Current (mA)
0
−20−30
−40
300
200
100
−100
−200
−300
10 30 4020
−10
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Example of IC Protection (VFR3V)
Type of Filter
Before Countermeasures
(No Filters)
Use VFR3VD31E131T51
EMI Suppression Effect
Test Circuit
!Example of EMI Suppression Effect Test Circuit
" Testing Method
1. Put ESD surge to IC (7404 family) input terminal with
ESD simulator based on IEC 801-2.
2. Check IC's operation.
3. If IC's operation is normal, increase ESD voltage in 1kV
steps.
4. Continue above steps 1 to 3 till IC's operation becomes
abnormal.
" Result
Varistor VFR3V can protect IC from ESD.
0LS ALS
Without VFR3V
Breakdown level
[kV]
(Result) With use VFR3V
AS C
IC’s Family HC AC
5
10
15
20
25
30 min.
EMI Suppression Effect
330ΩVFR3V
ESD Simulator
Test IC
150pF
Noise Radiation Cable (50cm)
ANT
Signal
1MHz ACO4
Shield
F
2030 90 150 210 270 330
30
40
50
60
70
Noise Level (dBµV/m)
Frequency (MHz)
2030 90 150 210 270 330
30
40
50
60
70
Noise Level (dBµV/m)
Frequency (MHz)
Noise Suppression Effect of VFR/VFS Series
163
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Features (VFS9V)
!Pulse-Voltage Breakdown Characteristic (VFS9V)
Items
Overload
Test methods Rated values
1.4 times the varistor voltage (V1) is applied for 5 minutes at room
temperature.
At a temperature of 85±3D, the varistor voltage V1 is continuously
applied to the sample for 1000 to 1024 hours.
Then it is left at room temperature, for 4 to 24 hours before measuring.
Surge Test (1) At room temperature. Surges are applied are
105 times every 2 seconds. Then after 1 or 2
hours, the sample is measured.
Surge Test (2)
High
Temperature
Load
At room temperature. Capacitor
"C" is charged with 70V, then discharged to
apply the voltage to the sample. Tested once
(resuming JASO A-1).
400V 0.47µF
70V
0.8Ω
2Ω
C
C=110mF
Items Specifications
Rated Capacitance Change
Insulation Resistance
Rated of Change
in Varistor Voltage V1*
Voltage Rate
WithinT15%
500kΩ min.
WithinT15%
1.30 max.
*V1: Voltage when 1mA is applied
50Ω
50Ω
V
800ns
Residual ratio
when 1000 pulses
are applied
VFS9V EMIGUARDr use a self healing varistor- capacitor,
so that it can be used under a 500 to 600V surge which
would break conventional disk type EMI filters. As shown in
figure below EMIGUARDr withstands 2000V impulses
applied 1000 times.
!Temperature Characteristics of
Varistor Voltage - Insulation Resistance (VFS9V)
EMI Suppression Effect
100
00 1000500
Pulse Voltage Applied (V)
Residual Rate (%)
VFS9V
1500 2000
50
Capacitance: 0.022µF
with varistor function
3-terminal capacitor
Capacitance: 0.022µF
with no varistor
function
−10
0
+10
104
103
−30 0 30 60 90
Temperature (D)
Insulation Resistance (MΩ)
Insulation
resistance Change rate of
varistor voltage
102
10
1
Change Rate of Varistor Voltage (%)
Continued on the following page.
Noise Suppression Effect of VFR/VFS Series
164
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
!Noise Absorption Effect of EMIGUARDr (VFS9V)
Type of Filter
without EMIGUARDr
EMI Suppression Effect Description
Waveform when EMIGUARDr is not
used.
(Surge from a noise simulator)
Waveform after the noise passed
through EMIGUARDr. Little noise is
recorded.
with EMIGUARDr
D
223S
12-22
100
: 200V/div
: 10ns/div
90
80
20
10
0%
100
: 200V/div
: 10ns/div
90
80
20
10
0%
!Comparative Data (VFS9V)
Type of Filter
without Filters
Conventional varistor
VFS9V
Two terminal capacitor
(with varistor function)
EMI Suppression Effect Description
As with the two terminal capacitor
The two terminal capacitor is influenced
by lead line inductance, leaving behind
some of the rising and falling edges.
The residual noise can cause the
system to malfunction.
The three terminal structure eliminates
most of the lead line inductance. This
allows VFS9V to completely absorb the
rising and falling edges of the applied
pulses.
100
90
80
20
1100
0%
100
90
80
20
1100
0%
100
90
80
20
1100
0%
Noise wave applied
1. Absorption of quick-rising, high-frequency noise (10ns/div, 100V/div)
2000V
50ns
EMI Suppression Effect
Continued from the preceding page.
Continued on the following page.
Noise Suppression Effect of VFR/VFS Series
165
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Type of Filter
without Filters
Two terminal capacitor
VFS9V
Three terminal capacitor
(with ferrite bead)
EMI Suppression Effect Description
In capacitors the voltage of the residual
surge (1300V) is higher than that of the
above example. The wave height is
almost the same as the original.
Conventional EMI filters do not work for
wide-pulse noise because capacitors
are saturated. In this example, the
residual 1200V surge can cause the
system to breakdown.
Bypassing the high voltage to the
ground, voltage can be suppressed.
2. Absorption of wide-pulse noise (50ns/div, 200V/div)
Noise wave applied
100
90
80
20
10
0%
100
90
80
20
10
0%
100
90
80
20
10
0%
1300V
200ns
EMI Suppression Effect
Continued from the preceding page.
Noise Suppression Effect of VFR/VFS Series
166
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
167
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Common Mode Choke Coils Part Numbering
(Part Number)
Common Mode Choke Coils
eApplications
Code
for DC Line High-frequency Type
Applications
09H
qProduct ID
PL Common Mode Choke Coils
Product ID
wType
TDC Type
Code Type
oPackaging
BAll seriesBulk
Code Packaging Series
uWinding Mode
PAligned Winding Type
Code Winding Mode
yRated Current
Expressed by three-digit alphanumerics. The unit is in amperes
(A). A decimal point is expressed by the capital letter "R". In this
case, all figures are significant digits.
iLead Dimensions
15mm
Code Lead Dimensions
Code
General Use
Features
N
rFeatures
tInductance
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
t
200
r
N
y
3R0
q
PL
e
09H
w
T
u
P
i
1
o
B
168
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Common Mode Choke Coils (for DC Line) PLT09H Series
PLT09H series is a common mode choke coil for DC
lines. It is effective against the common mode noise
that can cause radiative noise in power supply lines
and interface lines. The additional normal mode
inductance enables high suppression effect to
radiation noise.
■ Features
1. This is a wide frequency range type, applicable in
applications ranging from a few MHz to several
100MHz.
2. It features a low-profile design.
■ Applications
1. Noise suppression of SW power supply, DC-DC converter
2. DC power lines in AC adapter of Portable equipment
(in mm)
14 max.
5±0.5 Soldered 10±0.5
5±18 max. 13 max.
ø0.6 max.
(1) (2)
(4) (3)
PLT09H Series
Part Number Inductance (min.)
(µH) Rated Current
(A) Rated Voltage
(Vdc) Withstand Voltage
(Vdc)
PLT09HN2003R0P1 20 min. 3 50 125
Operating Temperature Range: -40°C to 85°C
■ Equivalent Circuit
(1) (2)
(4) (3)
No polarity.
■ Insertion Loss Characteristics
15
0
5
10
20
25
30 0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
169
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Microwave Absorbers Part Numbering
(Part Number)
Microwave Absorber
qProduct ID
EA Microwave Absorber
Product ID
wSheet Type
Code
10pp
2070
2100
2200
3008
Iron carbonyl type (UL certified type/non Halogen type)
Metal Flake Powder (non Halogen type)
Metal Flake Powder (UL certified type)
Metal Flake Powder (UL certified type/non Halogen type)
Magnetic material (UL certified type/non Halogen type)
Sheet Type
eAdhesive Tape Type
Code
A
B
L
U
Standard tape type (non Halogen type)
Thin Adhesive tape type (non Halogen type)
No tape type
UL certified type (non Halogen type)
Adhesive Tape Type
tUnit of Dimension
Code
M
C
in mm (Standard)
in cm (Standard)
Unit of Dimension
rSheet Thickness
Expressed by 3 digits including the second decimal place in mm.
One capital lettler expresses Unit of Dimension (y) and
Dimensions Length (u).
yDimension (Length)
Expressed by 3 digits including the first decimal place.
uDimension (Width)
Expressed by 3 digits including the first decimal place.
M300150
C150100
Ex.)
30.0g15.0 mm
15.0g10.0 cm
Code Dimension (Length g Width)
020
Ex.)
0.20mm
Code Sheet Thickness
r
160
q
EA
t
M
y
200
u
200
e
A
w
1026
Standard shape is a rectangle.
Please contact us for other shapes.
170
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Microwave Absorbers EA10/20/21/22/30 Series
EA10 Series
When inquiring, please contact us with size code,
refering to "Part Numbering".
■ Features
1. Excellent elasticity and durability with silicon
rubber
2. Suitable for prevention of abnormal oscillation in
high frequency modules, suppression of spurious
spectra and prevention of interference between
circuits
3. Holds easily in equipment with adhesive tape
EA10 Series
Part Number Applicable Frequency
(Typ.) Thickness (Typ.)
(mm) Flame Resistance Halogen Operating Temperature Range
EA1026A100 20.0GHz 1.0 UL94V-0 Halogen Free -40 to +80°C
EA1026A160 11.5GHz 1.6 UL94V-0 Halogen Free -40 to +80°C
EA1026A180 10.0GHz 1.8 UL94V-0 Halogen Free -40 to +80°C
EA1046A180 5.8GHz 1.8 UL94V-0 Halogen Free -40 to +80°C
EA1075A270 2.5GHz 2.7 UL94V-0 Halogen Free -40 to +80°C
■ Reflection Loss
0 2 4 6 8 10 12 14 16 18 20
Frequency (GHz)
40
35
30
25
20
15
10
5
0
EA1075A270
EA1046A180
EA1026A180 EA1026A160
EA1026A100
Reflection Loss (dB)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
171
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EA20/21/22 Series
When inquiring, please contact us with size code,
refering to "Part Numbering".
■ Features
1. Magnetically-shielded high-micro and high-loss
characteristics can suppress noise in a wide
frequency band for digital equipment.
2. Thin (0.2mm-1.0mm) and flexible sheet makes easy
handling in assembly process.
3. Holds easily in equipment with adhesive tape
4. EA20xx series: Non Halogen type
EA21xx series: UL94V-0 certified material is used
EA22xx series: Non Halogen type and UL94V-0
certified material is used
EA20/21/22 Series
Part Number Applicable Frequency
(Typ.) Thickness (Typ.)
(mm) Flame Resistance Halogen Operating Temperature Range
EA2070A020 0.1 to 3.0GHz 0.20 - Halogen Free -40 to +120°C
EA2070A050 0.1 to 3.0GHz 0.50 - Halogen Free -40 to +120°C
EA2070A100 0.1 to 3.0GHz 1.00 - Halogen Free -40 to +120°C
EA2070B005 0.1 to 3.0GHz 0.05 - Halogen Free -40 to +120°C
EA2070B010 0.1 to 3.0GHz 0.10 - Halogen Free -40 to +120°C
EA2070B013 0.1 to 3.0GHz 0.13 - Halogen Free -40 to +120°C
EA2070B020 0.1 to 3.0GHz 0.20 - Halogen Free -40 to +120°C
EA2070B050 0.1 to 3.0GHz 0.50 - Halogen Free -40 to +120°C
EA2100A020 0.1 to 3.0GHz 0.20 UL94V-0 - -40 to +120°C
EA2100A050 0.1 to 3.0GHz 0.50 UL94V-0 - -40 to +120°C
EA2100A100 0.1 to 3.0GHz 1.00 UL94V-0 - -40 to +120°C
EA2100B020 0.1 to 3.0GHz 0.20 UL94V-0 - -40 to +120°C
EA2100B050 0.1 to 3.0GHz 0.50 UL94V-0 - -40 to +120°C
EA2100B100 0.1 to 3.0GHz 1.00 UL94V-0 - -40 to +120°C
EA2200A010 0.1 to 3.0GHz 0.1 UL94V-0 Halogen Free -40 to +120°C
EA2200A020 0.1 to 3.0GHz 0.2 UL94V-0 Halogen Free -40 to +120°C
EA2200A050 0.1 to 3.0GHz 0.5 UL94V-0 Halogen Free -40 to +120°C
EA2200A100 0.1 to 3.0GHz 1.0 UL94V-0 Halogen Free -40 to +120°C
EA2200B010 0.1 to 3.0GHz 0.1 UL94V-0 Halogen Free -40 to +120°C
EA2200B020 0.1 to 3.0GHz 0.2 UL94V-0 Halogen Free -40 to +120°C
EA2200B050 0.1 to 3.0GHz 0.5 UL94V-0 Halogen Free -40 to +120°C
EA2200B100 0.1 to 3.0GHz 1.0 UL94V-0 Halogen Free -40 to +120°C
■ Magnetic Permeability - Reluctance (Typical)
Frequency (GHz)
0.1 1.0 10
0
4
8
12
16
20
µ"
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
172
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EA30 Series
When inquiring, please contact us with size code,
refering to "Part Numbering".
■ Features
1. EMC Absorber magnetically shields and suppresses
noise of digital equipment.
2. Flexible sheet, easy handling in assembly process.
3. Holds easily in equipment with adhesive tape.
4. Halogen free and UL94V-0 certified material are
used. EA30 Series
Part Number Applicable Frequency
(Typ.) Thickness (Typ.)
(mm) Flame Resistance Halogen Operating Temperature Range
EA3008U025 0.1 to 3.0GHz 0.25 UL94V-0 Halogen Free -40 to +120°C
EA3008U035 0.1 to 3.0GHz 0.35 UL94V-0 Halogen Free -40 to +120°C
EA3008U050 0.1 to 3.0GHz 0.50 UL94V-0 Halogen Free -40 to +120°C
EA3008U100 0.1 to 3.0GHz 1.00 UL94V-0 Halogen Free -40 to +120°C
EA3008U250 0.1 to 3.0GHz 2.50 UL94V-0 Halogen Free -40 to +120°C
■ Magnetic Permeability - Reluctance (Typical)
Frequency (GHz)
0.1 1 10
0
2
4
6
8
10
µ', µ"
µ'
µ"
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Chip EMIFILr !Caution/Notice
173
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ !Caution (Rating)
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
■ !Caution (Soldering and Mounting)
1. Self-heating
Please provide special attention when mounting chip
"EMIFIL" (BLM_P/K/S, NFM_P) series in close proximity
to other products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in this
component.
2. Mounting Direction
Mount Chip Common Mode Choke Coils in right direction.
Wrong direction, which is 90 degrees rotated from right
direction, causes not only open or short circuit but also
flames or other serious trouble.
right direction wrong direction
ZZ
■ Notice (Storage and Operating Conditions)
■ Notice (Soldering and Mounting)
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
<Storage and Handling requirements>
1. Storage Period
BLM (except BLM15E/15H/15G series) /BLA/NFM55/
DLM11G/DLM2HG series should be used within 6
months, the other series should be used within 12
months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to 40 degrees C
Relative humidity: 30 to 70%
Avoid sudden changes in temperature and
humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
1. Washing
Failure and degradation of a product are caused
by the washing method. When you wash in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's
EMI suppression filters "EMIFIL" may vary,
depending on the circuits and ICs used, type of
noise, mounting pattern, lead wire length, mounting
location, and other operating conditions. Be sure
to check and confirm in advance the noise
suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
commercial-purpose equipment design.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Chip EMIFILr !Caution/Notice
174
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Handling)
1. Resin coating (Except DLW Series)
Using resin for coating/molding products may affect
the products performance.
So please pay careful attention in selecting resin.
Prior to use, please make the reliability
evaluation with the product mounted in your
application set.
2. Resin coating (DLW Series)
The impedance value may change due to high
cure-stress of resin to be used for coating/molding
products. An open circuit issue may occur by
mechanical stress caused by the resin, amount/cured
shape of resin, or operating condition etc. Some
resin contains some impurities or chloride possible
to generate chlorine by hydrolysis under some
operating condition may cause corrosion of wire of
coil, leading to open circuit.
So, please pay your careful attention in selecting
resin in case of coating/molding the products with
the resin. Prior to use the coating resin, please
make sure no reliability issue is observed by
evaluating products mounted on your board.
3. Caution for use (DLW/NFW Series)
When you hold products with a tweezer, please hold
by the sides. Sharp materials, such as a pair of
tweezers, should not touch the winding portion to
prevent breaking the wire. Mechanical shock should
not be applied to the products mounted on the board
to prevent breaking the core.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Lead Type EMIFILr !Caution/Notice
175
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ !Caution (Rating)
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
■ !Caution (Soldering and Mounting)
Mounting holes should be designed as specified in these
specifications. Other designs than shown in these
specifications may cause cracks in ceramics which may
lead to smoking or firing.
■ Notice (Storage and Operating Conditions)
■ Notice (Soldering and Mounting)
<Operating Environment>
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
2. Do not use products near water, oil or organic
solvents. Avoid environment where dust or dirt may
adhere to product.
<Concerning "EMIGUARD">
VFR3V series is designed only to absorb electrostatic
surges. Do not use this product to absorb large energy
surges such as lighting or switching related surges.
<Storage and Handling Requirements>
1. Storage Period
Used the products within 12 months after delivery.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to 40 degrees C
Relative humidity: 30 to 70%
Avoid sudden changes in temperature and
humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
(3) When restoring taping type (BL01RN1A1F1J),
please attach the Spacer between flanges of
reel. The Spacer is corrugated paper which is
attached when shipping.
1. Washing
Failure and degradation of a product are caused
by the washing method. When you wash in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's
EMI suppression filters "EMIFIL" may vary,
depending on the circuits and ICs used, type of
noise, mounting pattern, lead wire length, mounting
location, and other operating conditions. Be sure
to check and confirm in advance the noise
suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
commercial-purpose equipment design.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Microwave Absorbers Notice
176
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Conditions)
1. Adhesive Tape Stress
This product is designed for using the adhesive tape to hold
itself to the object.
And please avoid causing mechanical stress by bending or
variation of the object.
2. Cleaning
Avoid cleaning product.
3. Handling of the product
Adhesive tape must be clean to maintain the quality of tape.
And please wipe off any dirt, dust and any kind of oil from
the surface of the object before use.
4. Storage Conditions
(1) Storage period
(2) Storage conditions
Products which were inspected in Murata over 6 months
ago should be examined and used. This can be
confirmed with inspection No. marked on the container.
Adhesiveness should be checked if this period is
exceeded.
· Products should be stored in the warehouse on the
following conditions.
Temperature: -10 to 40˚C
Humidity: 30 to 70% relative humidity
No rapid change on temperature and humidity
· Products should be stored in the warehouse without
heat shock, vibration, direct sunlight and so on.
Flat cable
Stress
Products shall be located in the sideways
direction to the mechanical stress.
Product
«Poor example» «Good example»
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
1. Standard Land Pattern Dimensions
NFp series suppress noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum
performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As
shown below, one side of the PCB is used for chip mounting, and the other is used for grounding.
Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the high-
frequency impedance of the grounding and maximizes the filter's performance.
BLM02
BLM03
BLM15
BLM18
BLM21
• Except BLM03PG/15PD·PG/18PG·KG·SG/21PG.
And BLM02/03/15/18G is specially adapted for reflow
soldering.
Reflow
Reflow
Reflow
Flow
(except 18G)
Reflow
Flow/
Reflow
Type
0.16-0.2
0.2-0.3
0.4
0.7
1.2
a
0.4-0.56
0.6-0.9
1.2-1.4
2.2-2.6
1.8-2.0
3.0-4.0
b
Soldering
0.2-0.23
0.3
0.5
0.7
1.0
c
oReflow and Flow BLMppP/K/SBLM Series
Type
Land pad thickness
and dimension d
Rated
Current
(A)
a
Flow
2.2-2.6
Reflow
1.8-2.0
3.0-4.0
4.2-5.2
5.5-6.5
b c
18µm 35µm 70µm
Flow/
Reflow
Soldering
BLM02
BLM03
BLM15
BLM18
BLM21
BLM31
BLM41
c
a
b
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist
a
b
d (pattern)
c
(in mm)
• Do not apply narrower pattern than listed above to BLMppP/K/S.
Narrow pattern can cause excessive heat or open circuit.
Continued on the following page.
(Except BLM
15A_AN series)
BLM03PG
BLM15PD
BLM15PG
BLM18PG
BLM18KG
BLM18SG
BLM21PG
BLM31PG
BLM41PG
0.75-0.9
1.3-1.5
1.7-2.2
1
0.5-1.5
2
3
1.3-1.5
1.7-2.2
3-3.5
6
1.5
2.5
3-4
6
1.5
2
3
6
1.5/2
3
6
1-2
3
6
0.3
0.5
0.5
0.7
1.0
1.2
0.2-0.3
0.4
0.4
0.7
1.2
2.0
3.0
1.2-1.4
0.6-0.9
0.3
0.5
1.2
0.5
0.7
1.2
2.4
0.7
1.2
2.4
6.4
0.7
1.2
2.4
6.4
1.0
1.2
2.4
6.4
1.2
2.4
6.4
1.2
2.4
6.4
0.3
0.5
0.7
0.5
0.7
0.7
1.2
0.7
0.7
1.2
3.3
0.7
0.7
1.2
3.3
1.0
1.0
1.2
3.3
1.2
1.2
3.3
1.2
1.2
3.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
0.7
0.7
0.7
1.65
0.7
0.7
0.7
1.65
1.0
1.0
1.0
1.65
1.2
1.2
1.65
1.2
1.2
1.65
Reflow
Reflow
1.2-1.4Reflow
EMIFILr (Soldering and Mounting)
177
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
o Reflow Soldering
NFM21
NFM3D
NFM31P
NFM41
NFR21G
NFL21S
NFM18
NFL18
NFM55
NFM21C/NFR21G
NFM21P/NFL21S
NFM3DC/NFM3DP
NFM31P
NFM41C/NFM41P
• NFp18, NFp21, NFM55 are specially adapted for reflow soldering.
Part Number Size (mm)
o Flow Soldering
NFM3DC
NFM3DP
NFM31P
NFM41C
NFM41P
4.4
4.4
6.0
1.4
1.4
2.0
Part Number Size (mm)
d
1.0
1.2
1.2
e
2.0
2.6
2.6
f
2.4
3.0
3.0
g
1.0
1.0
1.5
a b
2.5
2.5
3.5
c
Small diameter
thru hole ø0.4
a
e
0.6
f
g
b
c
d
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
The chip EMI filter suppresses noise by conducting the high-
frequency noise to ground. Therefore, to get enough noise reduction,
feed through holes which are connected to ground-plane should be
arranged according to the figure to reinforce the ground pattern.
2.6
4.4
4.4
6.0
-
1.4
1.4
2.0
d
0.8
1.0
1.2
1.2
e
1.9
2.0
2.6
2.6
f
2.3
2.4
3.0
3.0
g
0.6
1.0
1.0
1.5
a b
1.4
2.5
2.5
3.5
c
Small diameter thru hole ø0.4Small diameter thru hole ø0.4
NFM3DC/NFM3DP/
NFM31P
NFM41C/NFM41P
NFM21C/NFR21G
NFM21P/NFL21S
Chip mounting side
b
a
e
0.6
f
g
c
d
a
e
0.6
f
g
c
d
BLA2A
BLA31
oReflow soldering oReflow and Flow
BLA2A BLA31
• If there are high amounts of self-heating on pattern, the
contact points of PCB and part may become damaged.
0.40.8 Pitch
2.2-2.6
2.8
0.8
0.250.5 Pitch
1.5
1.75
0.5
Chip mounting side
Continued from the preceding page.
Continued on the following page.
0.4
1.0
1.2
Small diameter thru hole
ø1.0-ø2.0
Chip
2.0
0.8
0.8
0.4
0.4
0.6
1.0
1.5
2.2
0.4
0.6
1.2
Please contact us if using
thinner land pad than 18µm.
Small diameter thru hole
ø0.2-ø0.3
Small diameter thru hole
ø0.2-ø0.3
NFL18SPNFM18PS NFM55P
Reflow Soldering
NFM18C/NFM18PC/
NFL18ST
Small diameter thru hole
ø0.2
1.2
1.5
0.4
0.1
1.2
0.8
2.0
0.05
6.4
6.5
2.0
1.5
4.7
6.7
5.0
3.5
EMIFILr (Soldering and Mounting)
178
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
Continued from the preceding page.
Continued on the following page.
NFE61P o Reflow Soldering o Flow Soldering
2.0
1.6
2.6
3.0
4.8
8.8
Small diameter thru hole ø0.4
Chip mounting side
Small diameter thru hole ø0.4
1.2
3.2
3.6
0.6
3.8
4.8
9.0
1.5
Chip mounting side
NFA31G
NFA31C
NFW31S
NFE31P
o Reflow Soldering NFA31G/31C o Reflow and Flow NFW31S
o Reflow Soldering NFE31P
2.6
0.3 0.8 Pitch
2.2
3.8
0.4
1.0
R0.1 to R0.2 is preferred to obtain
high voltage withstanding
Small diameter thru hole ø0.4
2.6
3.0
1.2
2.2
4.2
0.6
1.0
Chip mounting side
4.2
Reflow Soldering
NFA18S
NFA21S
Small diameter thru hole ø0.2
Chip mounting side
0.250.25
0.252.5
1.5
0.25
0.25
0.5
1.75
0.5
NFA21SNFA18S
2.35
2.0
1.3
0.5
0.05
Filled via
ø0.1
0.4
0.175
1.375
0.50.35 1.2
0.225
0.175
0.275
ø0.4
EMIFILr (Soldering and Mounting)
179
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
DLM11G
DLM2HG
DLP0NS
DLP11S
DLP2AD
DLP31S
DLP31D
DLW21S
DLW21H
DLW31S
DLW5AH
DLW5BS
DLW5BT
oReflow and Flow
oReflow Soldering
DLP31S DLP31D
DLW5AH/5BS/5BT
∗ 1: If the pattern is made with wider than 1.2mm (DLW21) /
1.6mm (DLW31S) it may result in components turning
around, because melting speed is different. In the worst
case, short circuit between lines may occur.
∗ 2: If the pattern is made with less than 0.4mm, in the worst
case, short circuit between lines may occur due to spread
of soldering paste or mount placing accuracy.
∗ 3: If the pattern is made with wider than 0.8mm (DLW21) /
1.6mm (DLW31S), the bending strength will be reduced.
Do not use gild pattern; excess soldering heat may dissolve
metal of a copper wire.
1.0 0.6 1.0
0.7 0.7
2.1
2.8
0.8 pitch 0.4
2.2-2.6
0.8
DLM2HG
0.4
1.0
4.0
1.2
2.0
Land Pattern
Land Pattern
+ Solder Resist
Solder Resist (in mm)
Continued from the preceding page.
Continued on the following page.
DLW21S/H
DLW31S
0.8
1.6
0.4
0.4
Series a
1.2
1.6
d
2.6
3.7
b c
DLP11S
0.55
1.95
0.55
0.3
0.85
0.3
DLM11G
0.5
1.5
1.1
0.3
DLP2AD
1.75
0.25
0.5
1.5
0.4
DLW21S/21H/31S
a
∗3
∗1
∗2
b
c
d
DLP0NS
0.90
0.30
0.50
0.80
0.3
0.9
2.9
5.5
1.3
3.3
4.7
(1)(2)
(4)(3)
*(1), (2), (3), (4): Terminal Number
EMIFILr (Soldering and Mounting)
180
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
2. Solder Paste Printing and Adhesive Application
BLM Coating amount is illustrated in the
following diagram.
When reflow soldering the chip EMI suppression filter, the
printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
When flow soldering the EMI suppression filter, apply the
adhesive in accordance with the following conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.
(in mm)
oEnsure that solder is applied smoothly to a
minimum height of 0.2mm to 0.3mm at the end
surface of the part.
oCoat with solder paste to the following thickness:
50-80µm: BLM02
100-150µm: BLM03
100-200µm: BLM15/18/21/31/41
0.2−0.3mm min.
a: 20−70µm
b: 30−35µm
c: 50−105µm
c
a
b
Chip Solid Inductor
Bonding agent
Land
PCB
BLA BLA31 Series only
Coating amount is illustrated in the
following diagram.
oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing. Use of Sn-Zn based solder will
deteriorate performance of products. In case of
using Sn-Zn based solder, please contact Murata
in advance.
oCoat with solder paste to the following thickness:
100-150µm: BLA2A
150-200µm: BLA31
a: 20−70µm
b: 30−35µm
c: 50−105µm
c
a
b
Chip Solid Inductor
Bonding agent
Land
PCB
Series Solder Paste Printing Adhesive Application
Continued from the preceding page.
Continued on the following page.
(Except BLM
15A_AN series)
Land Pattern
Land Pattern
+ Solder Resist
Through Hole (in mm)
BNX022
BNX023 (1) A double-sided print board (or multilayer board) as shown in
the left figure is designed, and please apply a soldering Cu
electrode with a product electrode to a "Land Pattern", apply
resist to a "Land Pattern + Solder Resist" at Cu electrode.
(2) Please drop CG on a ground electrode on the back layer
(the same also in a multilayer case) by the through hole. And
a surface grand electrode layer may also take a large area
as much as possible.
(3) It is recommended to use a double-sided printed circuit
board with BNX mounting on one side and the ground
pattern on the other in order to maximize filtering
performance, multiple feed through holes are required to
maximize the BNX's connection to ground.
(4) The ground pattern should be designed to be as large as
possible to achieve maximum filtering performance.
B
PSG
CG
CG
CB
CG
12.5
10.2
9.9
9.6
7.1
6.2
5.3
2.8
2.3
0
0
3.8
5.8
10.3
13.7
17.5
13.2
0.4 1.75
0.5 0.5 0.5
1.5
0.8 0.25 0.25
0.80.7 0.7
BLA31 BLA2A
EMIFILr (Soldering and Mounting)
181
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(in mm)
Series Solder Paste Printing Adhesive Application
Continued from the preceding page.
Continued on the following page.
NFM
NFR
NFL
oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing. Use of Sn-Zn based solder will
deteriorate performance of products. If using NFM
series with Sn-Zn based solder, please contact
Murata in advance.
oCoat with solder paste to the following thickness:
100-150µm: NFM18/21/3D/31P, NFR, NFL
150-200µm: NFM55P
100-200µm: NFM41
Apply 0.1mg for NFM41C/41P and 0.06mg
for NFM3D/NFM31PC of bonding agent at
each chip. Do not cover electrodes.
Bonding agent Coating position of
bonding agent
NFM3DC/3DP NFM31P
NFM18C/18PC
NFL18ST
NFM41C/41P NFM55P
2.2
1.0
0.4
0.6
1.2
0.4
NFL18SP
0.4
1.0
2.0
0.4
1.2
NFM21C/21P
NFR21G/NFL21S
1.4
0.6
0.8
0.6
1.9
2.6
2.0
2.5
3.9
1.0
0.6
0.8
2.6
3.5
5.5
1.5
0.6
1.0
3.5
4.7
6.7
1.5
5.0
6.5
NFM18PS
0.8
0.4
0.1
1.2
1.20.05 2.0
2.6
2.5
4.4
1.0
0.6
1.2
EMIFILr (Soldering and Mounting)
182
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(in mm)
Series Solder Paste Printing Adhesive Application
Continued from the preceding page.
Continued on the following page.
NFE61P oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing.
oCoat with solder paste to the following thickness:
150-200µm
Apply 1.0mg of bonding agent at each chip.
2.6
4.8
8.8
1.5
1.6
Bonding agent
3.2
1.5
0.6
4.8
9.0
1.2
Bonding agent
NFA oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing.
oCoat with solder paste to the following thickness:
100-200µm: NFA31G/31C
100-150µm: NFA18S/21S
NFA31G/31C NFA21S
NFA18S
0.3 0.8 pitch
2.2
0.4
1.0
2.6 0.6 0.5 1.5
0.25 0.25
0.5
1.75
0.25
0.75
1.375
0.4
0.175 0.225
1.3
0.05
2.0
0.175
NFW31S
NFE31P NFW31S Series
Apply 0.2mg of bonding agent at each chip.
oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing.
oCoat with solder paste to the following thickness:
150-200µm
2.6
2.2
4.2
0.6
0.6
1.0
Coating positon of
bonding agent
Bonding agent
EMIFILr (Soldering and Mounting)
183
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
DLP
DLW
DLM
(in mm)
oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing. Use of Sn-Zn based solder will
deteriorate performance of products. If using
DLP/DLM series with Sn-Zn based solder, please
contact Murata in advance.
oCoat with solder paste to the following thickness:
100-150µm: DLW21S/21H/31S,
DLP0NS/11S/2AD
150-200µm: DLP31D/31S, DLM2HG,
DLW5AH/5BS/5BT
*Solderability is subject to reflow conditions and
thermal conductivity. Please make sure that your
product has been evaluated in view of your
specifications with our product being mounted to your
product.
DLP31S/DLM2HG
Apply 0.3mg of bonding agent at each chip.
Series Solder Paste Printing Adhesive Application
DLP31SDLP31D
Coating Position of
Bonding Agent
Coating Position of
Bonding Agent
DLM2HG
Coating Position of
Bonding Agent
Continued from the preceding page.
Continued on the following page.
a b a
c c
d
DLW21S/21H/31SDLP0NS/11S/31S/DLM11G
a
b
c
d
DLW5AH/5BS/5BT
5.5
2.9
0.9
1.3
3.3
4.7
DLP2AD/31D
d
c
a ab
DLM2HG
0.4
1.0
4.0
1.2
2.0
DLP0NS
DLP11S
DLP31S
DLM11G
0.3
0.7
1.0
0.5
0.3
0.3
0.7
0.4
Series a
0.5
0.55
2.1
0.7
d
0.3
0.55
0.6
0.5
b c
DLW21S/H
DLW31S
0.8
1.6
0.5
0.4
Series a
1.2
1.6
d
2.6
3.7
b c
DLP2AD
DLP31D
0.55
1.0
0.25
0.4
Series a
0.5
0.8
d
0.4
0.8
b c
EMIFILr (Soldering and Mounting)
184
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
3. Standard Soldering Conditions
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
EMI suppression filters.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: H60A H63A solder (JIS Z 3238)
In case of lead-free solder, use Sn-3.0Ag-0.5Cu
solder. Use of Sn-Zn based solder will deteriorate
performance of products.
If using BLA/NFM/DLP/DLM series with Sn-Zn
based solder, please contact Murata in advance.
Flux:
o Use Rosin-based flux.
In case of DLW21/31 series, use Rosin-based flux with
converting chlorine content of 0.06 to 0.1wt%.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
Continued on the following page.
oFlow Soldering profile
(Eutectic solder, Sn-3.0Ag-0.5Cu solder)
BLM (Except BLM02/03/15/18G)
BLA31
NFM3DC/3DP/31PC
NFM41C/41P
NFE61P
DLM2HG
DLP31D/31S
NFW31S
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time. (t1)
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 2 times
max.
265±3°C
Time. (t2)
Heating
Cycle
of flow Temp. (T3) Time. (t2) Cycle
of flow
T1
T3
T2
Temperature (°C)
Pre-heating
time (s)
t2
Heating Limit Profile
Standard Profile
t1
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 1 times
265±3°C
(2) Soldering profile
BNX022
BNX023
oUse Sn/Pb=60/40 or Sn-3.0Ag-0.5Cu solder for
pattern printing.
oCoat with solder paste to the following thickness:
150-200µm
Series Solder Paste Printing Adhesive Application
B
PSG
CG
CG
CG
12.5
10.2
9.6
7.1
5.3
2.8
2.3
0
0
3.8
5.8
10.3
13.7
17.5
CB
Continued from the preceding page.
EMIFILr (Soldering and Mounting)
185
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(3) Reworking with Solder Iron
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150°C 60s min.*1
*1 NFM55P: 100°C/60s+200°C/60s
Soldering iron power output: 30W max.*2
*2 BNX022/023: 100W max.
Temperature of soldering iron tip / Soldering time: 350°C
max./3s max.*3
*3 NFE31PT152Z1E9: 280°C max./10s max.
BNX022/023: 450°C max./5s max./1 times
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
Continued from the preceding page.
Continued on the following page.
oReflow Soldering profile
qSoldering profile for Lead-free solder (Sn-3.0Ag-0.5Cu)
BLM, BLA
NFA, NFE
NFL, NFM (Except NFM55P)
NFR, DLM
DLP
DLW21/31
NFW31S, NFM55P
DLW5A/5B
Series
Standard Profile Limit Profile
Temp. (T1) Time. (t1)
Heating
220°C min. 30 to 60s 245±3°C2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
220°C min. 30 to 60s 250±3°C2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
220°C min. 30 to 60s 245±3°C2 times
max. 230°C min. 260°C/10s 1 times60s max.
Cycle
of reflow
Peak
temperature
(T2) Temp. (T3) Time. (t2)
Heating Cycle
of reflow
Peak
temperature
(T4)
BNX022/023 220°C min. 30 to 60s 250±3°C2 times
max. 230°C min. 260°C/10s 2 times
max.
60s max.
T1
T3
T2
Temperature (°C)
t1 time (s)
t2 Standard Profile
150
180
T2 T4
T3
T1
Temperature (°C)
90s±30s time (s)
t2
t1
wSoldering profile for Eutectic solder (Limit profile: refer to q)
BLM, BLA
NFA, NFE
NFL, NFM
NFR, NFW
DLM, DLP
DLW, BNX022/023
Series
Standard Profile
Temp. (T1) Time. (t1)
Pre-heating
150°C 60s min. 183°C min. 230°C 2 times max.60s max.
Temp. (T2) Time. (t2)
Heating Cycle
of reflow
Peak
temperature
(T3)
Limit Profile
Standard Profile
Pre-heating
EMIFILr (Soldering and Mounting)
186
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
BLM15A_AN is series for wire bonding mounting.
(1) Die bonding mounting
(a) Dimension of standard metal mask
Continued from the preceding page.
5. Mounting of BLM15A_AN Series
(b) Die bonding agent
o Use adhesive for die bonding for which the curing
temperature is 200°C or less.
(c) Notice
o Use a flat surface of substrate for bonding mounting.
Slant mounting of product may affect the wire bonding.
o Adhesive for die bonding may affect the mounting
reliability in wire bonding.
Make sure of the mounting reliability with the adhesive to
be used in advance.
0.1-0.5
0.7
Chip Ferrite Bead
Metal thickness: 50µm
(in mm)
4. Cleaning
Following conditions should be observed when cleaning
chip EMI filter.
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.
Do not clean DLW21S/31S/5AH/5BS/5BT/BNX022/023
series.
Before cleaning, please contact Murata engineering.
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.
(5) Some products may become slightly whitened.
However, product performance or usage is not affected.
For additional cleaning methods, please contact Murata
engineering.
EMIFILr (Soldering and Mounting)
187
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
1. Mounting Hole
Mounting holes should be designed as specified below.
Continued on the following page.
DSN6
DSS6
VFR3V
VFS6V
DSN9
DSN9H
DST9
DST9H
DSS9
DSS9H
VFS9V
BNX00p/01pTERMINAL LAYOUT (Bottom figure)Component Side
Part number Bulk type (in mm) Taping type (in mm)
2.5±0.2 2.5±0.2
ø0.8-3
ø1.0-3
ø0.8-3
ø0.8-3
2.5±0.2 2.5±0.2
1.0±0.2
1.25±0.2
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
7.5±0.1
(PSG) (B)
(CG)
(CG) (CG)
(CB)
5.0±0.1
2.5±0.1
2.5±0.12.5±0.1 2.5±0.2
ø0.8-3
ø1.2
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
1
Lead Type EMIFILr (Soldering and Mounting)
188
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued from the preceding page.
This product effectively prevents undesired radiation and
external noise from going out / entering the circuit by
grounding the high frequency components which cause
noise problems. Therefore, grounding conditions may affect
the performance of the filter and attention should be paid to
the following for effective use.
(a) Design maximized grounding area in the P.C. board,
and grounding pattern for all the grounding terminals
of the product to be connected. (Please follow the
specified recommendations.)
(b) Minimize the distance between ground of the P.C.
board and the ground plate of the product.
(Recommend unsing the through hole connection
between grounding area both of component side and
bottom side.)
(c) Insert the terminals into the holes on P.C. board
completely.
(d) Don't connect PSG terminal with CG terminal directly.
(See the item 1. Terminal Layout)
2. Using The Block Type EMIFILr Effectively
(1) How to use effectively
Use a bilateral P.C. board. Insert the BNX into the P.C.board until
the root of the terminal is secured, then solder.
PSG
B
B
CG CG CG CG
CG
CG CB CB
PSG
PSG B
Copper foil pattern
PSGB
(1) COMPONENT SIDE VIEW (2) BOTTOM VIEW
Shield plate
P. C. BOARD PATTERNS
Though this product has a large rated current, localized
selfheating may be caused depending on soldering
conditions. To avoid this, attention should be paid to the
following:
(a) Use P.C. board with our recommendation on hole
diameter / land pattern dimensions, mentioned in the
right hand drawing, especially for 4 terminals which
pass current.
(b) Solder the terminals to the P.C. board with
soldercover area at least 90%. Otherwise, excess
self-heating at connection between terminals and P.C.
board may lead to smoke and / or fire of the product
even when operating at rated current.
(c) After installing this product in your product, please
make sure the self-heating is within the rated current
recommended.
(2) Self-heating
Copper foil pattern
(in mm)
Through holes
Recommended land pattern
PSG
B
CG CG
CG
CB
7.5
5.0
2.5
2.52.5
3.2
3.2 3.2
ø1.2
Continued on the following page.
2
Lead Type EMIFILr (Soldering and Mounting)
189
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Continued from the preceding page.
(1) Terminal (with mark) should be properly connected to
the line of incoming electrostatic surge. (There is
polarity.) Otherwise, no effect in ESD suppression can
be expected (VFR3V).
(2) Products should be used at rated voltage or less and
rated current or less.
(3) Products should not be applied for the absorption of
surges which have large energy (ex. induced lightning
surges, switching surges) because it is designed for the
absorption of electrostatic surges (VFR3V).
(4) Electrostatic test should be done on the following
conditions (VFR3V).
3. Using EMIGUARDr effectively
n • [ C / R • V2 ]2 < 8.0 ×105
n: Times applied
C: Charging Capacitance (pF)
V: Testing Voltage (kV)
R: Charging Resistance (Ω)
incoming
Electrostatic Surges incoming
Electrostatic Surges
Example of input terminal Example of output terminal
Do not clean VFR3V, PLT09H and VFS6V series.
Clean other parts in the following conditions.
(1) Cleaning temperature should be limited to 60°C max.
(40°C max for alcohol type cleaner).
(2) Ultrasonic cleaning should comply with the following
conditions, avoiding the resonance phenomenon at the
mounted products and P.C.B.
Power: 20 W / l max. Frequency: 28 to 40kHz
Time: 5 min. max.
(3) Cleaner
(a) Alcohol type cleaner
Isopropyl alcohol (IPA)
(b) Aqueous agent (PLT series cannot be cleaned)
PINE ALPHA ST-100S
(4) There should be no residual flux or residual cleaner left
after cleaning.
In the case of using aqueous agent, products should be
dried completely after rinsing with de-ionized water in
order to remove the cleaner.
(5) The surface of products may become dirty after cleaning,
but there is no deterioration on mechanical, electrical
characteristics and reliability.
(6) Other cleaning: Please contact us.
5. Cleaning Conditions
(1) Solder: H60A, H63A solder (JIS Z 3238)
In case of lead-free solder, use Sn-3.0Ag-0.5Cu solder.
(2) Use Rosin-based flux. Do not use strong acidic flux with
halide content exceeding 0.2wt% (chlorine conversion
value).
(3) Products and the leads should not be subjected to any
mechanical stress during the soldering process, or while
subjected to the equivalent high temperatures.
(4) Standard flow soldering profile
4. Soldering
Solder
Soldering temperature
Soldering time
Sn/Pb=60/40, Sn/Pb=63/37
Sn-3.0Ag-0.5Cu solder
240 to 260˚C
250 to 260˚C
5s max.
4 to 6s
Pre-heating
Soldering
Gradual cooling
(in air)
150°C
300
250
200
150
100
50
Temperature (°C)
60s min. Soldering time
Soldering temperature
3
Lead Type EMIFILr (Soldering and Mounting)
190
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Part Number Cavity Size (in mm) Minimum Qty. (pcs.)
BLM02
BLM03
BLM15
BLM18
BLM18EG/KG_TN
BLM18EG/KG_SN
BLM18S
BLM18T
BLM21
BLM31
BLM21BD222SN1/272SN1
BLA2A
BLA31
NFM18PC105R/225B1A
NFL18SP
NFL18ST
NFL21SP
NFM21
NFM3DC/3DP
NFM31P
NFA18S
NFA21SL_45
NFA21SL_48
NFA31G/31C
NFE31P
NFR21G
NFW31S
DLM11G
DLM2HG
DLP0NS
DLP11S
DLP2AD
DLP31D/31S
DLW21S
DLW21H
DLW31S
NFM18C/
NFM18PC (
Except
105R/225B1A)/
NFM18PS
(in mm)
ø1.5
Direction of feed
a
c
∗1 4.0±0.1
2.0±0.05
4.0±0.1
3.5±0.05
8.0
1.75±0.1
c
c: Depth of Cavity
(Embossed Tape) c: Total Thickness of Tape
(Paper Tape)
d
<Embossed>
b
+0.1
-
0
There are holes in the cavities of the BLM21BD222SN1/
BD272SN1/BLM31 and NFA21SL_48 only. ø1.0+0.3
-0
• Please contact us for BLM15/18 in bulk case.
ø180mm reel
Paper Tape
Embossed Tape
Paper Tape
Embossed Tape
dcba
ø330mm reel Bulk
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
Continued on the following page.
0.45
0.70
1.15
1.85
1.85
1.85
1.85
2.25
3.5
2.25
2.2
3.4
1.85
1.85
2.3
2.3
3.4
3.5
1.8
2.30
2.25
3.5
3.6
2.3
3.6
1.45
2.75
0.95
1.4
2.2
3.5
2.25
2.3
3.6
0.25
0.40
0.65
1.05
1.05
1.05
1.05
1.45
1.9
1.45
1.2
1.8
1.05
1.05
1.55
1.55
1.4
1.9
1.0
1.55
1.45
2.0
1.8
1.55
1.9
1.2
2.25
0.75
1.2
1.2
1.9
1.45
1.55
2.0
0.40 max.
0.55 max.
0.8 max.
1.1 max.
0.85 max.
1.1 max.
0.90 max.
0.90 max.
1.1 max.
1.3
1.3
0.8 max.
1.1 max.
0.9 max.
1.1 max.
0.9 max.
1.1 max.
1.1 max.
1.1 max.
0.85
1.5
0.7
0.7
1.05
1.1 max.
1.85
0.7
2.0
0.8 max.
1.3
0.55
0.98
0.98
1.3
1.4
1.1
2.1
-
-
-
-
-
-
-
-
0.2
0.2
-
-
-
-
-
-
0.2
0.25
0.25
0.25
0.25
-
0.2
0.25
0.2
-
0.25
0.25
0.25
0.25
0.25
0.3
0.25
0.3
-
-
-
-
-
-
-
-
3000
3000
-
-
-
-
-
-
4000
3000
4000
4000
4000
-
2000
4000
2000
-
3000
5000
3000
3000
3000
2000
3000
2000
-
50000
50000
10000
10000
30000
-
10000
-
-
50000
10000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
1000
500
500
500
1000
1000
1000
100
500
500
-
1000
1000
500
500
500
500
500
500
500
20000
15000
10000
4000
4000
10000
10000
4000
-
-
10000
4000
4000
4000
4000
4000
-
-
-
-
-
4000
-
-
-
10000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10000
10000
-
-
-
-
-
-
-
-
-
-
-
-
8000
-
7500
-
-
-
-
-
-
-
-
-
∗1 BLM15/18S/18T, BLA2A: 2.0±0.1
BLM02/03, DLM11G: 2.0±0.05
<Paper>
BLM02/03
c
Chip EMIFILr Packaging
191
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(in mm)
(in mm)
ø1.5
Direction of feed
a
c
c: Depth of Cavity
c: Depth of Cavity
c: Depth of Cavity
4.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05
12.0
1.75±0.1
0.3
There are holes in the cavities
of the BLM41 only. ø1.5 +0.3
-
0
b
+0.1
-
0
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
Minimum Quantity and Dimensions of 24mm Width Embossed Tape
a
c
8.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05
12.0
0.4
b
1.75±0.1
ø1.5+0.1
-
0
Direction of feed
BLM41
NFM41
NFE61
Part Number Cavity Size Minimum Qty. (pcs.)
4.8
4.8
7.2
1.9
1.8
1.9
1.75
1.1
1.75
2500
4000
2500
8000
-
8000
ø180mm reelcba ø330mm reel
1000
500
500
Bulk
DLW5AH
DLW5BS
DLW5BT
Part Number Cavity Size Minimum Qty. (pcs.)
5.4
5.5
5.5
4.1
5.4
5.4
4.4
4.7
2.7
400
400
700
1500
1500
2500
ø180mm reelcba ø330mm reel
100
100
100
Bulk
Continued from the preceding page.
a
c
8.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05
12.0
0.3
b
1.75±0.1
ø1.5+0.1
-
0
Direction of feed
NFM55P
Part Number Cavity Size Minimum Qty. (pcs.)
6.0 5.3 2.5
cba
ø1.7±0.1
500 -
ø180mm reel ø330mm reel
100
Bulk
BNX022/023
Part Number Cavity Size Minimum Qty. (pcs.)
12.4 9.4 3.3
cba
400 1500
ø180mm reel ø330mm reel
100
Bulk
4.0x10pitch=40.0±0.2
12.0±0.1
b: 9.4±0.1
3° max.
4.0±0.1 2.0±0.1
3.3±0.1
11.5±0.1
a: 12.4±0.1
0.3±0.1
c: 3.3±0.1 c: Depth of Cavity
24.0±0.2
1.75±0.1
ø1.5 +0.1
-
0
ø1.5 +0.5
-
0
Chip EMIFILr Packaging
192
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
BL01RN_J
BL01RN_A
BL02RN1R3N1A
BL02RN2R3N1A
BL02RN1R2p1A
BL02RN2R1p1A
BL03RN2R1p1A
(in mm)
Minimum Quantity (Pcs.)
Bulk
BL01RN
BL02RN
BL03RN
Series
500
500
1000
Ammo Pack
1000
1500
2000
ø320mm Paper reel
2000
—
—
Symbol
Pitch of component
Pitch of sprocket hole
Lead spacing
Hole center to lead
Hole center to component center
Offset of bead
Carrier tape width
Position of sprocket hole
Lead length between sprocket
hole and forming position
Protruding length
Diameter of sprocket hole
Lead Diameter
Total tape thickness
Deviation across tape, Deviation across tape rear
Cutting position of failure
Hold down tape width
Hold down tape position
Description
P
P0
F
P1
P2
∆S
W
W1
H1
I
D0
ød
t
∆h1, ∆h2
L
W0
W2
Dimension (mm)
12.7
12.7±0.2
5.0
3.85±0.7
6.35±1.3
±1.0
18.0±0.5
9.0 0.0
+0.5 to –1.0
ø4.0±0.1
ø0.60
0.7±0.2
1.0 max.
11.0 0.0
12.0±0.5
1.5±1.5
Remarks
Product inclination ∆S determines tolerance
Tape deviation in feeding direction
Include the offset caused by lead bend
Tape with deviation
BL02, BL03
BL02RN1R2/2R1, BL03
BL02, BL03
Including bonding tape thickness
0 max.
0.8 max. L1 L2
*L
| L1 - L2 | V 1.5 6.0±1.0
0.8 max.
3.2 min.
5±0.5
ø0.60±0.05
5±0.3
ø3.6
±0.15
1.2 max.
Direction of feed
*L BL01RN1A1F1J : 52+2/-1
BL01RN1A1E1A : 26+1.5/-0
∆S
∗There is an excess bond stick on the wire.
t
∆h1∆h2
D0
∗3.4±0.2
P0
ød
H1
W0
W2
WW1
7.5 max.
P
7.5 max.
I
P2
FP1
L
3.4±0.2
ød
∗There is an excess bond stick on the wire.
t
∆h1∆h2
D0
∗
∆S
P0
H1
W0
W2
W1
W
8.0 max.
P
12.0 max.
I
P2
F
P1
L
∆S
t
∆h1∆h2
D0
3.4±0.2
P0
ød
H1
W0
W2
WW1
9.0 max.
P
7.5 max.
I
P2
FP1
L
3.4±0.2
ød
t
∆h1∆h2
D0
∆S
P0
H1
W0
W2
W1
W
9.0 max.
P
12.0 max.
I
P2
F
P1
L
∆S
t
∆h1∆h2
D0
2.3 max.
P0
ød
H1
W0
W2
W
W1
8.3 max.
P
6.5 max.
I
P2
FP1
L
+0.8
-
0.2
+0
-
0.5
+0
-
1.0
Lead Length Number : N
Lead Length Number : Q
Lead Length Number : P
16.5±0.5
20.0±0.5
18.5±0.5
Taping Dimensions
Ferrite Beads Inductors Packaging
193
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Minimum Quantity Lead Type Code
Minimum Order Quantity (order in sets only) (Pcs.)
VFR3V Series
DS 6/VFS6V Series
DSN9/9H Series
DST9 Series
DSS9 Series
VFS9V Series
Part Number Ammo Pack Bulk (Bag)
2000 250
2000 250 Q55/T51
500 Q54/Q56/T41
2000 250 Q55
500 Q54/Q56
1000 200 Q55
250 Q50/Q52
—200 Q55
500 Q54/Q56
—
ø320mm
Paper reel
—
—
—
—
800
800 200
Lead length (H)
Q91 20.0±1.0mm
Q92 16.5±1.0mm
Lead Type code
Straight Type
Incrimp Type
-
U21
Q93 18.5±1.0mmU31
DSN6_Q91/Q92/Q93
DSN9_Q91/Q92/Q93
DST9_Q92/Q93
DSS9_Q91/Q92/Q93
VFS9V_Q91/Q92/Q93
DSS6_Q91/Q92/Q93
DSS6_U21/U31
VFS6V_U31
Taping Dimensions
VFR3V_U31
(in mm)
6.35±1.3 12.7
8.0 max.
0±1.0
18.0±0.5
9.0+0/-0.5
ø4.0±0.1
18.5±1.0
1.5 max.
0.7±0.2
1.5±1.5
5.0 max.
3.85±0.7
1.0 max. 1.0 max.
2.3 max.
ø0.45±0.1
12.0±0.5
AY AYAY
11.0+0/-1.0
12.7±0.2
5.0+0.8/-0.2 2.5+0.4/-0.2
2.5+0.4/-0.2
+0.5 to -1.0
(1)(2)(3)
6.35±1.3 12.7
DSN6_ : 7.0 max.
DSN9_ : 9.5 max.
0±1.0
3.85±0.7
18.0±0.5
9.0+0/-0.5
12.7±0.2 ø4.0±0.1
2.5+0.4/-0.2
0.7±0.2
1.5 max.
1.5±1.5
DSN6_ : 8.0 max.
DSN9_ : 11.0 max.
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
H
12.0±0.5
+0.5 to -1.0
ø0.6
1.0 max. 1.0 max.
5.0+0.8/-0.2
11.0+0/-1.0
0.7±0.2
1.5 max.
12.7±0.2 ø4.0±0.1
3.85±0.7
12.7 9.5 max. 0±1.0
1.5±1.5
15.5 max.
4.0 max.
1.0 max. 1.0 max.
ø0.6
2.5+0.4/-0.2
6.35±1.35.0+0.8/-0.2 2.5+0.4/-0.2
11.0+0/-1.0
18.0±0.5
9.0+0/-0.5
12.0±0.5
+0.5 to -1.0
H
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
H
0.7±0.2
1.5 max.
12.7±0.2
18.0±0.5
9.0+0/-0.5
1.5±1.5
7.0 max.
1.0 max. 1.0 max.
2.54 max.
ø0.6
6.35±1.3 12.7 0±1.0
11.0+0/-1.0
3.85±0.7
ø4.0±0.1
5.0+0.8/-0.2 2.5+0.4/-0.2
2.5+0.4/-0.2
12.0±0.5
+0.5 to -1.0
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
H
8.0 max.
*1
*2
*1 Bottom of dielectric may be exposed.
*2 If a hole is on the top of the ferrite bead, the bead should not be exposed.
6.35±1.3 12.7
8.0 max
0±1.0
18.0±0.5
9.0+0/-0.5
ø4.0±0.1
0.7±0.2
1.5 max.
1.5±1.5
3.85±0.7
1.0 max. 1.0 max.
2.54 max.
ø0.6
12.0±0.5
11.0+0/-1.0
5.0+0.8/-0.2
12.7±0.2
2.5+0.4/-0.2
2.5+0.4/-0.2
+0.5 to -1.0
H
U21 Type : 16.5±1.0
U31 Type : 18.5±1.0
HDSS6_U : 10.0 max.
VFS6V : 10.5 max.
*1
*2
*1 Bottom of dielectric may be exposed.
*2 If a hole is on the top of the ferrite bead, the bead should not be exposed.
DSN6_ : 2.54 max.
DSN9_ : 4.0 max.
ø4.0±0.1
0.7±0.2
1.5 max.
18.0±0.5
9.0+0/-0.5
3.85±0.7
2.5+0.4/-0.2
1.5±1.5
12.0±0.5
+0.5 to -1.0
12.0 max. 0±1.0
11.0 max.
1.0 max. 1.0 max.
*1
Point A
7.5 max.
ø0.6
11.0+0/-1.0
6.35±1.3 12.7
5.0+0.8/-0.2
12.7±0.2
2.5+0.4/-0.2
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
*2 H
*2 H
*1 Coating extending on leads does not exceed the start of bend. (Point A)
Exposed electrodes are covered with solder.
*2 H: to be measured from the forming point A.
*3 The deviation between two ferrite beads should be less than 1.2mm.
*3
Disc Type EMIFILr and EMIGUARDr Packaging
194
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Part NumberNo. DC Resistance
(Ω) max.
Rated Current
(mA)
Impedance typ.
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15BA050SN1
BLM15BA100SN1
BLM15BA220SN1
BLM15BA330SN1
BLM15BA470SN1
BLM15BA750SN1
BLM15BB050SN1
BLM15BB100SN1
BLM15BB220SN1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10Ω (Typ.)
70Ω (Typ.)
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
5Ω±25%
10Ω±25%
22Ω±25%
33Ω±25%
47Ω±25%
75Ω±25%
5Ω±25%
10Ω±25%
22Ω±25%
1000
500
500
300
300
200
300
300
300
300
200
200
500
300
300
0.05
0.15
0.25
0.35
0.60
1.00
0.10
0.20
0.30
0.40
0.60
0.80
0.08
0.10
0.20
oEKEMBL15J (Chip Ferrite Beads 0402 Size)
Chip EMI Suppression Filter Design Kits
1
Continued on the following page.
Part NumberNo. DC Resistance
(Ω) max.
Rated Current
(mA)
Impedance typ.
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
BLM02AG100SN1
BLM02AG700SN1
BLM02AG121SN1
BLM03AG100SN1
BLM03AG700SN1
BLM03AG800SN1
BLM03AG121SN1
BLM03AG241SN1
BLM03AG601SN1
BLM03AG102SN1
BLM03BB100SN1
BLM03BB220SN1
BLM03BB470SN1
BLM03BB750SN1
BLM03BB121SN1
BLM03BD750SN1
BLM03BD121SN1
BLM03BD241SN1
BLM03PG220SN1
BLM03PG330SN1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10Ω (Typ.)
70Ω±25%
120Ω±25%
10Ω (Typ.)
70Ω (Typ.)
80Ω±25%
120Ω±25%
240Ω±25%
600Ω±25%
1000Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
75Ω±25%
120Ω±25%
75Ω±25%
120Ω±25%
240Ω±25%
22Ω±25%
33Ω±25%
500
250
200
500
200
200
200
200
100
100
300
200
200
200
100
300
250
200
900
750
0.1
0.5
0.8
0.1
0.4
0.4
0.5
0.8
1.5
2.5
0.4
0.5
0.7
1.0
1.5
0.4
0.5
0.8
0.065
0.090
oEKEMBL03D (Chip Ferrite Beads 01005 Size / 0201 Size)
Chip EMI Suppression Filter Design Kits
195
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
2Continued on the following page.
Part NumberNo.
BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
1
2
3
4
5
6
7
DC Resistance
(Ω) max.
0.18
0.25
0.25
0.30
0.35
0.38
0.50
Rated Current
(mA)
500
500
500
500
500
500
400
Impedance typ.
(at 100MHz, 20 degrees C)
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
Quantity
(pcs.)
10
10
10
10
10
10
10
BLM18BA050SN1
BLM18BA100SN1
BLM18BA470SN1
BLM18BA750SN1
BLM18BA121SN1
8
9
10
11
12
0.20
0.25
0.55
0.70
0.90
500
500
300
300
200
5Ω±25%
10Ω±25%
47Ω±25%
75Ω±25%
120Ω±25%
10
10
10
10
10
oEKEMBL18G (Chip Ferrite Beads 0603 Size)
BLM15HG601SN1
BLM15HG102SN1
BLM15HB121SN1
BLM15HB221SN1
BLM15EG121SN1
BLM15EG221SN1
BLM15GG221SN1
BLM15GG471SN1
BLM15GA750SN1
30
31
32
33
34
35
36
37
38
10
10
10
10
10
10
10
10
10
600Ω±25%
1000Ω±25%
120Ω±25%
220Ω±25%
120Ω±25%
220Ω±25%
220Ω±25%
470Ω±25%
75Ω±25%
300
250
300
250
1500
700
300
200
200
0.70
1.10
0.70
1.00
0.095
0.28
0.70
1.30
1.30
BLM15BD601SN1
BLM15BD102SN1
BLM15BD182SN1
BLM15HD601SN1
BLM15HD102SN1
BLM15HD182SN1
24
25
26
27
28
29
10
10
10
10
10
10
600Ω±25%
1000Ω±25%
1800Ω±25%
600Ω±25%
1000Ω±25%
1800Ω±25%
200
200
100
300
250
200
0.65
0.90
1.40
0.85
1.25
2.20
BLM15PG100SN1
BLM15PD300SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
39
40
41
42
43
10
10
10
10
10
10Ω (Typ.)
30Ω±25%
60Ω±25%
80Ω±25%
120Ω±25%
1000
2200
1700
1500
1300
0.05
0.035
0.06
0.07
0.09
Part NumberNo. DC Resistance
(Ω) max.
Rated Current
(mA)
Impedance typ.
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
BLM15BB121SN1
BLM15BB221SN1
BLM15BD750SN1
BLM15BD121SN1
BLM15BD221SN1
BLM15BD471SN1
18
19
20
21
22
23
10
10
10
10
10
10
120Ω±25%
220Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
300
200
300
300
300
200
0.55
0.80
0.20
0.30
0.40
0.60
BLM15BB470SN1
BLM15BB750SN1
16
17
10
10
47Ω±25%
75Ω±25%
300
300
0.35
0.40
BLM18BB050SN1
BLM18BB100SN1
BLM18BB220SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BB750SN1
BLM18BB121SN1
BLM18BB151SN1
13
14
15
16
17
18
19
20
0.05
0.10
0.20
0.25
0.25
0.30
0.30
0.37
700
700
600
550
550
500
500
450
5Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
60Ω±25%
75Ω±25%
120Ω±25%
150Ω±25%
10
10
10
10
10
10
10
10
Chip EMI Suppression Filter Design Kits
196
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Chip EMI Suppression Filter Design Kits
3
Continued from the preceding page.
Continued on the following page.
Part NumberNo.
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
BLM18HD471SN1
BLM18HD601SN1
1
2
3
4
5
6
7
8
DC Resistance
(Ω) max.
0.85
1.00
1.60
0.50
0.80
1.20
1.20
1.50
Rated Current
(mA)
200
200
100
200
100
50
100
100
Impedance
(at 100MHz, 20 degrees C)
470Ω±25%
600Ω±25%
1000Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
Impedance
(at 1GHz, 20 degrees C)
600Ω (Typ.)
700Ω (Typ.)
1000Ω (Typ.)
500Ω±40%
1100Ω±40%
1600Ω±40%
1000Ω (Typ.)
1200Ω (Typ.)
Quantity
(pcs.)
10
10
10
10
10
10
10
10
oEKEMBL8GA (Chip Ferrite Beads 0603 Size / for High Frequency Type)
BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
BLM18PG221SN1
BLM18PG331SN1
BLM18PG471SN1
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
0.05
0.025
0.10
0.05
0.09
0.10
0.15
0.20
1000
3000
500
2000
1500
1400
1200
1000
30Ω (Typ.)
33Ω±25%
60Ω (Typ.)
120Ω±25%
180Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
10
10
10
10
10
10
10
10
BLM18KG260TN1
BLM18KG700TN1
BLM18KG121TN1
BLM18KG221SN1
BLM18KG331SN1
BLM18KG471SN1
BLM18KG601SN1
0.007
0.022
0.030
0.050
0.080
0.130
0.150
6000
3500
3000
2200
1700
1500
1300
26Ω±25%
70Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
10
10
10
10
10
10
10
BLM18SG260TN1
BLM18SG700TN1
BLM18SG121TN1
BLM18SG221TN1
BLM18SG331TN1
52
53
54
55
56
0.007
0.020
0.025
0.040
0.070
6000
4000
3000
2500
1500
26Ω±25%
70Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
10
10
10
10
10
Part NumberNo. DC Resistance
(Ω) max.
Rated Current
(mA)
Impedance typ.
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
BLM18RK121SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1
57
58
59
60
0.25
0.5
0.6
0.8
200
200
200
200
120Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
10
10
10
10
BLM18BB221SN1
BLM18BB331SN1
BLM18BB471SN1
21
22
23
0.45
0.58
0.85
450
400
300
220Ω±25%
330Ω±25%
470Ω±25%
10
10
10
BLM18BD470SN1
BLM18BD121SN1
BLM18BD151SN1
BLM18BD221SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
24
25
26
27
28
29
30
31
32
33
34
35
36
0.30
0.40
0.40
0.45
0.50
0.55
0.55
0.65
0.85
1.20
1.50
1.50
1.50
200
200
200
200
200
200
200
200
100
50
50
50
50
47Ω±25%
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
420Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
1500Ω±25%
1800Ω±25%
2200Ω±25%
2500Ω±25%
10
10
10
10
10
10
10
10
10
10
10
10
10
Chip EMI Suppression Filter Design Kits
197
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
4Continued on the following page.
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BB221SN1
BLM21BB331SN1
BLM21BB471SN1
8
9
10
11
12
13
14
0.07
0.20
0.25
0.25
0.35
0.40
0.45
500
200
200
200
200
200
200
5Ω±25%
60Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
10
10
10
10
10
10
10
Part NumberNo.
BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AG102SN1
1
2
3
4
5
6
7
DC Resistance
(Ω) max.
0.15
0.15
0.20
0.25
0.25
0.30
0.45
Rated Current
(mA)
200
200
200
200
200
200
200
Impedance typ.
(at 100MHz, 20 degrees C)
120Ω±25%
150Ω±25%
220Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
Quantity
(pcs.)
10
10
10
10
10
10
10
oEKEMBL21D (Chip Ferrite Beads 0805 Size / for Large-current P Type)
Part NumberNo.
BLM18HD102SN1
BLM18HE601SN1
BLM18HE102SN1
BLM18HE152SN1
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
BLM18EG101TN1
BLM18EG121SN1
BLM18EG221TN1
BLM18EG221SN1
BLM18EG331TN1
BLM18EG391TN1
BLM18EG471SN1
BLM18EG601SN1
BLM18GG471SN1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DC Resistance
(Ω) max.
1.80
0.25
0.35
0.50
0.50
0.70
0.90
1.50
0.045
0.04
0.15
0.05
0.21
0.30
0.21
0.35
1.30
Rated Current
(mA)
50
800
600
500
200
200
100
50
2000
2000
1000
2000
500
500
500
500
200
Impedance
(at 100MHz, 20 degrees C)
1000Ω±25%
600Ω±25%
1000Ω±25%
1500Ω±25%
330Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
100Ω±25%
120Ω±25%
220Ω±25%
220Ω±25%
330Ω±25%
390Ω±25%
470Ω±25%
600Ω±25%
470Ω±25%
Impedance
(at 1GHz, 20 degrees C)
1700Ω (Typ.)
600Ω (Typ.)
1000Ω (Typ.)
1500Ω (Typ.)
400Ω (Typ.)
600Ω (Typ.)
700Ω (Typ.)
1200Ω (Typ.)
140Ω (Typ.)
145Ω (Typ.)
300Ω (Typ.)
260Ω (Typ.)
450Ω (Typ.)
520Ω (Typ.)
550Ω (Typ.)
700Ω ( Typ.)
1800Ω±30%
Quantity
(pcs.)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG221SN1
BLM21PG331SN1
BLM31PG330SN1
26
27
28
29
30
31
0.01
0.015
0.025
0.050
0.09
0.01
6000
3000
3000
2000
1500
6000
22Ω±25%
30Ω (Typ.)
60Ω±25%
220Ω±25%
330Ω±25%
33Ω±25%
10
10
10
10
10
10
BLM21BD121SN1
BLM21BD221SN1
BLM21BD421SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222SN1
BLM21BD222TN1
BLM21BD272SN1
15
16
17
18
19
20
21
22
23
24
25
0.25
0.25
0.30
0.35
0.35
0.40
0.45
0.50
0.60
0.60
0.80
200
200
200
200
200
200
200
200
200
200
200
120Ω±25%
220Ω±25%
420Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
1500Ω±25%
1800Ω±25%
2250Ω (Typ.)
2200Ω±25%
2700Ω±25%
10
10
10
10
10
10
10
10
10
10
10
Chip EMI Suppression Filter Design Kits
198
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
5
Continued from the preceding page.
Chip EMI Suppression Filter Design Kits
Continued on the following page.
NFA31GD4703304
NFA31GD4704704
NFA31GD4701014
NFA31GD1016R84
13
14
15
16
20
20
15
50
1000
1000
1000
1000
6
6
6
6
47pF±20%
47pF±20%
47pF±20%
100pF±20%
10
10
10
10
oEKEMFA31D (Chip EMIFILr Capacitor Array Type/ RC Combined Array Type)
NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4
NFA31GD1006R84
NFA31GD1004704
NFA31GD1001014
NFA31GD4706R84
1
2
3
4
5
6
7
8
9
10
11
12
200
200
200
200
200
200
200
200
50
20
15
50
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
25
25
25
25
25
25
25
16
6
6
6
6
22pF±20%
47pF±20%
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
10pF±20%
10pF±20%
10pF±20%
47pF±20%
10
10
10
10
10
10
10
10
10
10
10
10
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Capacitance
Quantity
(pcs.)
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
11
12
13
14
15
16
700
700
1000
1000
1000
2000
1000
1000
1000
1000
1000
1000
50
50
50
50
50
50
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
10
10
10
10
10
10
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
NFM21CC220U1H3
NFM21CC470U1H3
3
4
5
6
7
8
9
10
500
500
500
600
700
1000
700
700
1000
1000
1000
1000
1000
1000
1000
1000
16
16
16
16
16
16
50
50
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
22pF±20%
47pF±20%
10
10
10
10
10
10
10
10
oEKEMNFMCB (Chip EMIFILr Capacitor Type for Signal Lines)
NFM18CC220U1C3
NFM18CC470U1C3
1
2
400
400
1000
1000
16
16
22pF±20%
47pF±20%
10
10
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Capacitance
Quantity
(pcs.)
Part NumberNo. DC Resistance
(Ω) max.
Rated Current
(mA)
Impedance typ.
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
32
33
34
35
36
37
38
39
40
0.025
0.025
0.05
0.09
0.01
0.025
0.025
0.05
0.09
3000
3000
2000
1500
6000
3000
3000
2000
1500
50Ω (Typ.)
120Ω±25%
390Ω (Typ.)
600Ω (Typ.)
60Ω (Typ.)
75Ω (Typ.)
180Ω (Typ.)
470Ω (Typ.)
1000Ω (Typ.)
10
10
10
10
10
10
10
10
10
NFA31GD101470417 20 10006100pF±20%10
Chip EMI Suppression Filter Design Kits
199
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
6
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
Continued on the following page.
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Cut-off Frequency
Quantity
(pcs.)
oEKEMFA20E (Chip EMIFILr LC Combined Array Type)
NFA18SL137V1A45
NFA18SL187V1A45
NFA18SL207V1A45
NFA18SL307V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA21SL506X1A48
NFA21SL806X1A48
NFA21SL207X1A45
NFA21SL207X1A48
NFA21SL307X1A45
NFA21SL307X1A48
1
2
3
4
5
6
7
8
9
10
11
12
10
10
10
10
10
10
10
10
10
10
10
10
130MHz
180MHz
200MHz
300MHz
400MHz
480MHz
50MHz
80MHz
200MHz
200MHz
300MHz
300MHz
10
10
10
10
10
10
10
10
10
10
10
10
50
50
50
100
100
100
20
20
100
100
100
100
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Part NumberNo.
Quantity
(pcs.) Cut-off
Frequency
Attenuation (dB min.)
10MHz 20MHz 50MHz
100MHz 150MHz 200MHz 300MHz 400MHz 500MHz
1GHz Rated
Current Rated
Voltage
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
18
19
20
21
22
23
24
25
26
10
10
10
10
10
10
10
10
10
10MHz
20MHz
50MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
6dB max.
-
-
-
-
-
-
-
-
5
6dB max.
-
-
-
-
-
-
-
25
5
6dB max.
-
-
-
-
-
-
25
25
10
6dB max.
-
-
-
-
-
-
-
-
-
6dB max.
-
-
-
-
25
25
30
5
-
6dB max.
-
-
-
-
-
-
-
10
-
6dB max.
-
-
-
-
-
-
20
-
-
6dB max.
-
30
30
30
20
30
10
5
-
6dB max.
30
30
30
30
30
30
15
10
10
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
25V
25V
25V
25V
25V
25V
25V
25V
25V
Part NumberNo. Cut-off Frequency Rated Current
(mA)
Rated Voltage
(Vdc) DC Resistance
(Ω) max.
Quantity
(pcs.) Insulation Resistance
(MΩ min.)
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
1
2
3
4
5
6
7
8
9
10
11
10
10
10
10
10
10
10
10
10
10
10
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
10MHz
20MHz
50MHz
70MHz
16
16
16
10
10
10
10
16
16
16
16
150
200
200
100
100
100
100
100
100
150
150
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3.5
1.8
1.5
3.0
3.0
3.0
2.0
8.5
8.5
3.5
3.0
oEKEMFL18E (Chip EMIFILr LC Combined Type)
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
12
13
14
15
16
17
10
10
10
10
10
10
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
16
16
16
16
16
16
200
200
250
300
300
300
1000
1000
1000
1000
1000
1000
2.0
2.0
1.5
1.2
1.2
1.2
NFA31GD101101418 15 10006100pF±20%10
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Capacitance
Quantity
(pcs.)
Chip EMI Suppression Filter Design Kits
200
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
7
Continued from the preceding page.
Chip EMI Suppression Filter Design Kits
Continued on the following page.
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Common Mode Impedance
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
oEKEMDL21J (Chip Common Mode Choke Coils)
DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SR670HQ2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
10
10
10
10
10
10
10
10
10
10
10
10
10
10
67Ω±25%
90Ω±25%
120Ω±25%
180Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
180Ω±25%
260Ω±25%
370Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
67Ω±25%
50
50
50
50
50
50
50
50
50
50
20
20
20
20
330
330
280
250
400
330
370
330
300
280
320
280
280
400
10
10
10
10
10
10
10
10
10
10
10
10
10
10
oEKEMNFMPH (Chip EMIFILr for Large Current)
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3
NFM18PC225B1A3
NFM18PS474R0J3
NFM18PS105R0J3
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105B1C3
NFM21PC225B0J3
NFM21PC475B1A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
2
2
2
2
4
2
2
2
2
2
4
4
4
6
1000
1000
1000
500
200
200
1000
500
1000
1000
1000
500
500
200
100
16
6.3
6.3
6.3
6.3
10
6.3
6.3
25
16
16
10
16
6.3
10
0.1µF±20%
0.22µF±20%
0.47µF±20%
1µF±20%
2.2µF±20%
2.2µF±20%
0.47µF±20%
1µF±20%
0.1µF±20%
0.22µF±20%
0.47µF±20%
1µF±20%
1µF±20%
2.2µF±20%
4.7µF±20%
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Part NumberNo. Rated Current
(A) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Capacitance
Quantity
(pcs.)
16
17
18
19
20
21
22
NFE31PC276B0J3
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT102E1H9
NFE61PT472C1H9
NFM41PC204F1H3
NFM41PC155B1E3
6
6
6
2
2
2
6
20
1000
1000
1000
1000
1000
300
6.3
25
25
50
50
50
25
27µF±20%
1500pF +50/-20%
2200pF±50%
1000pF +80/-20%
4700pF +80/-20%
0.2µF +80/-20%
1.5µF±20%
10
10
10
10
10
10
10
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Cut-off Frequency
Quantity
(pcs.)
NFA21SL317V1A48
16 10 310MHz 10 100 1000
NFA21SL337V1A45
NFA21SL337V1A48
17
18
10
10
330MHz
330MHz
10
10
100
100
1000
1000
NFA21SL287V1A45
NFA21SL287V1A48
NFA21SL317V1A45
13
14
15
10
10
10
280MHz
280MHz
310MHz
10
10
10
100
100
100
1000
1000
1000
Chip EMI Suppression Filter Design Kits
201
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
6
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
oEKEMDCC5B (Chip Common Mode Choke Coils for DC Power Line / SMD Block type EMIFILr for Power Line)
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Common Mode Impedance
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
DLW5AHN402SQ2
DLW5BSN191SQ2
DLW5BSN351SQ2
DLW5BSN102SQ2
DLW5BSN152SQ2
DLW5BSN302SQ2
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2
1
2
3
4
5
6
7
8
9
10
11
5
5
5
5
5
5
5
5
5
5
5
4000Ω (Typ.)
190Ω (Typ.)
350Ω (Typ.)
1000Ω (Typ.)
1500Ω (Typ.)
3000Ω (Typ.)
100Ω (Typ.)
250Ω (Typ.)
500Ω (Typ.)
1000Ω (Typ.)
1400Ω (Typ.)
50
50
50
50
50
50
50
50
50
50
50
200
5000
2000
1500
1000
500
6000
5000
4000
2000
1500
10
10
10
10
10
10
10
10
10
10
10
Part NumberNo. Rated Current
(A) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Insertion Loss
Quantity
(pcs.)
BNX022-01
BNX023-01
12
13
5
5
1MHz to 1GHz: 35dB min.
1MHz to 1GHz: 35dB min.
50
100
10
15
500
500
DLP2ADN161HL4
DLP2ADN201HL4
DLP2ADN241HL4
DLP2ADN281HL4
32
33
34
35
10
10
10
10
160Ω±20%
200Ω±20%
240Ω±20%
280Ω±20%
5
5
5
5
100
90
80
80
100
100
100
100
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Common Mode Impedance
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
Part NumberNo. Rated Current
(mA) Insulation Resistance
(MΩ min.)
Rated Voltage
(Vdc)
Common Mode Impedance
(at 100MHz, 20 degrees C)
Quantity
(pcs.)
DLP2ADN900HL4
DLP2ADN121HL4
30
31
10
10
90Ω±20%
120Ω±20%
5
5
130
120
100
100
DLP11SN161SL2
20 10 160Ω±20% 5 120 100
DLP11SN900HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11SA350HL2
DLP11SA670HL2
DLP11SA900HL2
21
22
23
24
25
26
27
28
10
10
10
10
10
10
10
10
90Ω±20%
200Ω±20%
240Ω±20%
280Ω±20%
330Ω±20%
35Ω±25%
67Ω±25%
90Ω±25%
5
5
5
5
5
5
5
5
150
110
100
90
80
170
150
150
100
100
100
100
100
100
100
100
DLP2ADN670HL4
29 10 67Ω±20% 5 140 100
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
DLP11SN670SL2
DLP11SN121SL2
15
16
17
18
19
10
10
10
10
10
67Ω±20%
90Ω±20%
120Ω±20%
67Ω±20%
120Ω±20%
5
5
5
5
5
110
100
90
180
140
100
100
100
100
100
Chip EMI Suppression Filter Design Kits
202
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Outlines of Major Noise Regulation Standards
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
203
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
1. EMI Regulations
Countries
Equipment
Generic Standard
ITE: Information Technology
Equipment
Printers, Personal computers
Word processors, Displays
ISM equipment, Microwaves
Igniter
(Automobiles, Motorboats)
TVs, Radios, Audios, VTRs
Household electrical
equipment
Portable tools
Fluorescent Lamps, Luminaries
Transceivers
CISPR61000-6-3
(Residential, Commercial
and Light Industry)
IEC61000-6-4
(Industrial)
EN50081-1
(Residential, Commercial
and Light Industry)
EN50081-2
(Industrial)
EN55022
EN55011
Automotive
Directive
EN55013
EN55014
EN55015
ETS300 Series
EN61000-3
EN61000-4 Series
EN50082-1
(Residential, Commercial
and Light Industry)
EN50082-2
(Industrial)
EN55020
EN55024
FCC Part 15
Subpart B
FCC Part 15
Subpart B
FCC Part 15
Subpart C
FCC Part 22
JASO
FCC Part 18
FCC Part 18
∗1
FCC Part 15
Subpart B
VCCI
∗1
∗1
∗1
∗1
Radio Act
ARIB
(Voluntary Regulation)
Industrial Voluntary
Regulation
Industrial Voluntary
Action
CISPR 22
CISPR 11
CISPR 12
CISPR 13
CISPR 14
CISPR 15
ITU-T
Basic Standard IEC61000-4
Industrial Process Measurement
and Control Equipment
Radios, TVs CISPR 20
ITE: Information Technology
Equipment CISPR 24
Generic Standard
IEC61000-6-1
(Residential, Commercial
and Light Industry)
IEC61000-6-2
(Industrial)
JIS C 61000-4
JIS C 61000-6-1
(Residential, Commercial
and Light Industry)
JIS C 61000-6-2
(Industrial)
(Reference) Power Supplies
Higher Harmonics IEC61000-3
EmissionImmunity
Information Regulation Japan USA Europe
There are EMI regulations in each country to meet EMI
noise levels emitted from digital equipment.
In the countries which regulate EMI, equipment which does
not satisfy regulations is not allowed to be sold.
Continued on the following page.
∗1 Electrical Appliance and Material Safety Law
Outlines of Major Noise Regulation Standards
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
204
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
Regulation
CISPR 22/
EN55022 Radiated Interference Horizontal Pol. Vertical Pol. 30M to 1GHz Quasi-Peak Detection Antenna
Artificial Main Network
Antenna
Artificial Main Network
Dipole Antenna
Artificial Main Network
Quasi-Peak Detection
Quasi-Peak Detection Mean Detection
Quasi-Peak Detection Mean Detection
Quasi-Peak Detection
Quasi-Peak Detection Mean Detection
150k to 30MHz
PeakUQuasi-PeakUAverage
(Qp)
30M to 40GHz
150k to 30MHz
30M to 1GHz
150k to 30MHz
AC Main Ports
Horizontal Pol. Vertical Pol.
AC Main Ports
Horizontal Pol. Vertical Pol.
AC Main Ports
Main Interference Voltage
Radiated Interference
Main Interference Voltage
Radiated Interference
Main Interference Voltage
VCCI
FCC Part 15
Measuring Item
Polarization and Measuring Point
Frequency (Hz) Detection Measuring Devices
2. Measurement Point and Noise Detection
3. Limits of CISPR 22/EN55022
(1) CISPR 22 recommends measurement at 10m distance.
However, other distance is acceptable if the limitation is
converted according to the following calculation.
Limitation shown left is converted to limitation for 3m
distance.
Conversion
Main Terminal Interference Voltage (Power Supply)
Radiated Interference
Short Repetition Period Long Repetition Period
V
t
Peak Detection
Quasi-Peak Detection
Average Detection
Limitation for
3m Distance
R3 (dB µ V/m)
r3 (µ V/m)
R3=20 log r3
R3=R10+20 (1-log3)
r3 = 10 r10
3
Limitation for
10m Distance
R10 (dB µ V/m)
r10 (µ V/m)
R10=20 log r10
79
30
10k
100k 150k 500k 1M
5M 10M 30M100M
50
70
90
66
56 56
46
73
60
50
Frequency (Hz)
Class A Quasi-peak value
Class A Mean value
Class B Quasi-peak value
Class B Mean value
30
10M 30M 100M 230M 1G
57
47
50
40
50
90
Class A
Class B
Frequency (Hz)
On the border frequency, lower limit should be applied.
Class A Equipment: The equipment which is used in light
industrial commercial areas.
Class B Equipment: The equipment which is used in
residential areas.
Continued from the preceding page.
V
t
Peak Detection
Quasi-Peak Detection
Average Detection
←
Voltage (dBµV)
70
Field Strength (dBµV/m)
Continued on the following page.
Outlines of Major Noise Regulation Standards
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
205
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(2) Scope of CISPR 22 Regulation
This regulation applies to information technology
equipment (ITE) which is defined as:
(a) Equipment that receives data from external signal
sources;
(b) Equipment that processes received data;
(c) Equipment that outputs data; and
(d) Equipment that has less than 600V rated voltage in
power supply.
On the border frequency, lower limit should be applied.
Class B ITE: Equipment that is designed to be used at home.
Class A ITE: Equipment that does not meet interference
limits of class B equipment, but satisfies
interference limits of class A equipment.
CISPR Regulations
CISPR 10 Organization, Regulations and Procedures of CISPR
CISPR 11 Industrial, Scientific and Medical (ISM) Radio-Frequency
Equipment
CISPR 12 Vehicles, Motor Boats and Spark-Ignited Engine driven
CISPR 13 Sound and Television Receivers
CISPR 14 Household Electrical Appliances, Portable Tools and Similar
Electrical Apparatus
CISPR 15 Fluorescent Lamps and Iuminaries
CISPR 16 Radio Interference Measuring Apparatus and Measurement
Methods
CISPR 17 Passive Radio Interference Filters and Suppression
Components
CISPR 18 Power Transmission Cables and High Voltage equipment
CISPR 19 Microwave Ovens for Frequencies above 1GHz
CISPR 20 Immunity of Sound and TV Broadcast Receivers
and Associated Equipment
CISPR 21 Interference to Mobile Radio Communications in the Presence
of Impulsive Noise
CISPR 22 Information Technology Equipment
CISPR 23 Industrial Scientific and Medical (ISM) Equipment
CISPR 24 Immunity Regulation of Information Technology Equipment
CISPR 25 Receiver used onboard vehicles, boats, and on devices
4. Limits of VCCI Voluntary Regulation
(1) VCCI recommends measurement at 10m distance;
3m or 30m distance measurements are also allowed.
(2) Scope of VCCI Voluntary Regulation
This regulation applies to information technology
equipment (same as CISPR Pub.22), but the application
is excluded on the following equipment:
· Equipment for which other regulations already exist
(e.g., household electrical appliances, radio and TV
receivers)
· In station equipment principal purpose of which is
electrical communication
· Industrial plant control system for which information
processing is a secondary system function
· Industrial, commercial and medical testing and
measuring systems for which data processing is a
secondary system function
· Information equipment for which CISPR is conducting
further deliberation
VCCI is the acronym of Voluntary Control Council for
Interference by Data Processing Equipment and
Electronic Office Machines.
VCCI is organized by the following organizations:
· Japan Electronics and Information Technology
Industries Association (JEITA)
· Japan Business Machine and Information System
Industries Association (JBMIA)
· Communication and Information Network Association
of Japan (CIAJ)
30
10k
100k 150k 500k 1M
5M 10M 30M 100M
50
90
70 66
56
79
56
46
73
60
50
Class A Quasi-peak value
Class A Mean value
Frequency (Hz)
Class B Mean value
Class B Quasi-peak value
30
10M 30M 100M 230M 1G
57
47
50
40
50
70
90
Frequency (Hz)
Class B Quasi-peak value
Main Terminal Interference Voltage (Power Supply)
Radiated Interference
Class A Quasi-peak value
Continued from the preceding page.
Voltage (dBµV)
Field Strength (dBµV/m)
Continued on the following page.
Outlines of Major Noise Regulation Standards
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
206
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
(1) Class A recommended to be measured with 10m distance.
Class B recommended to be measured with 3m distance.
(2) The FCC Part 15 regulation controls radiated interference
by establishing quasi-peak and mean value limits for
frequencies ranging from 30MHz to 40GHz (or maximum
frequency's fifth harmonic, whichever is lower).
For AC main ports, the FCC Part 15 regulation controls
main terminal interference voltage by establishing
quasipeak value limits for frequencies ranging from
450kHz to 30MHz.
(3) There is no regulation on power interference.
On the border frequency, lower limit should be applied.
Class A Equipment: The digital equipment that is sold for
commercial, industrial and office use.
Class B Equipment: The digital equipment that is sold to be
used in residential areas.
Radiated Interference
FCC Regulations
Part 1 Procedures
Part 2 Frequency Division and Radio Wave Treaty Issues and
General Rules
Part 15 Radio Wave Equipment
• Intentionally electromagnetic radiation equipment
• Non-intentionally electromagnetic radiation equipment
• Incidentally electromagnetic radiation equipment
Part 18 Industrial, Scientific and Medical Equipment
Part 22 Public Mobile Wireless Operations
Part 68 Connecting Terminal Equipment to Telephone Circuit Network
Part 76 Cable Television
Maximum Frequency
the Equipment Internally
Generates, Uses or Operates
or Synchronizes (MHz)
Less than 1.705
Over 1000
500 to 1000
108 to 500
1.705 to 108
Maximum Frequency's Fifth
Harmonic or 40GHz,
Whichever is Lower
30
5000
2000
1000
Upper End of Measurement
Frequency Range
(MHz)
Measurement Frequency Range for Radiated Interference
5. Limits of FCC Part 15 Subpart B
Continued from the preceding page.
Continued on the following page.
30
10M 30M 100M88M 216M 1G
960M
60
54
46
56.9
49.5 54
43.5
40
50
70
90
Field Strength (dBµV/m)
Frequency (Hz)
Class A
Class B
Noise level is regulated up to lower
frequency of the 5th harmonics of
maximum signal frequency and 40GHz.
30
10k
100k 150k 500k 1M
5M 10M 30M 100M
50
90
70 66
56
79
56
46
73
60
50
Class A Quasi-peak value
Class A Mean value
Frequency (Hz)
Class B Mean value
Class B Quasi-peak value
Main Terminal Interference Voltage (Power Supply)
Voltage (dBµV)
Outlines of Major Noise Regulation Standards
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
207
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
6. Immunity Regulations in the European Union
All electric/electronic equipment cannot be sold in Europe
without CE marking. To use CE marking, they must
satisfy related EC directives such as EMC directives.
For Information Technology Equipment, in EMC directive,
emission regulations are integrated, and immunity
regulations are applied. Although these immunity
regulations are prepared by CENELEC, almost all
contents are same as standards issued by IEC or CISPR.
7. Immunity Regulations in Japan
The table on the right shows the preparation situation of
JIS for EMC. At this moment, the immunity standards by
JIS do not have a legal force like the Electrical Application
and Material Safety Law/VCCI.
Principal EC Directive
EMC Directive
Machines Directive
Low-Voltage Electrical
Products Directive
89/336/EEC
92/31/EEC
89/392/EEC
73/23/EEC
All products which are sold in EU must satisfy EC directives which
contain immunity regulations.
Continued from the preceding page.
Equipment Association
JEITA (Japan Electronics and Information Technology)
TV, Radio, Audio
JBMIA (Japan Business Machine and Information System Industries Association)
ITE
CIAJ (Communication and Information Network Association of Japan)
ARIB (Association of Radio Industries and Business)
Office Machine
Mi
JMTBA (Japan Machine Tool Builders' Association)Machine To Builders
JEMIMA (Japan Electric Measuring Instruments Manufacturers' Association)Industrial Measuring Control Equipment
JARA (Japan Robot Association)Industrial Robot
Classification Information Regulation
ISO60050-161
(IEV terms 161)
Terms
JIS
JIS C 0161
IEC61000-4- 2
IEC61000-4- 3
IEC61000-4- 4
IEC61000-4- 5
IEC61000-4- 6
IEC61000-4- 7
IEC61000-4- 8
IEC61000-4-11
IEC61000-4-14
IEC61000-4-17
Basic Standards JIS C 61000-4-2
JIS C 61000-4-3
JIS C 61000-4-4
JIS C 61000-4-5
JIS C 61000-4-6
JIS C 61000-4-7
JIS C 61000-4-8
JIS C 61000-4-11
JIS C 61000-4-14
JIS C 61000-4-17
IEC61000-6-1
IEC61000-6-2 JIS C 61000-6-1
JIS C 61000-6-2
Generic Standards
Principles of Noise Suppression by DC EMIFILr
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
208
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
1. Function of DC EMI Suppression Filters
DC EMI suppression filters absorb and eliminate high
frequency noise which may produce electromagnetic
interference in PC board circuits.
These filters are used in secondary circuits, and are small
in size and light in weight, which further enhances their
excellent noise suppression functions.
Chip and adhesive type filters can be mounted on PC
boards automatically.
These filters are effective in the suppression of radiation
noise in computers, peripheral equipment, and digital
circuit application equipment (including various types of
microcomputer application equipment), and function to
suppress noise in audio/visual equipment, which uses
digital memory chips and DSP.
These filters are also effective for improving the noise
immunity of equipment used in noisy environments (such
as electronic equipment for automobiles).
2. Noise Filter Suppression Principles
Generally, noise problems occur when the noise source
and electronic equipment sensitive to the influence of
noise are located in close proximity to one another.
In such situations, as shown in Figure at right, noise is
conducted through a conductor, which produces an
inductive field around the noise source.
To overcome such noise problems, it is preferable to
reduce the amount of noise generated by the noise
source or improve the noise resistance of adjacent
equipment.
In order to satisfy equipment performance specifications
and eliminate noise effectively at the same time, however,
it is customary to reduce the amount of noise generated
by the noise source, if it can't be eliminated altogether.
3. Configuration of EMI Suppression Filters (DC)
DC EMI suppression filters are used to suppress noise
produced by conductors. Noise radiation can be
suppressed, if it is eliminated with a filter in advance.
Generally, such noise suppression is achieved with DC
EMI suppression filters, according to the capacitive and
inductive frequency characteristics of the respective
conductors in the circuit.
Filters of this kind can be roughly divided into those:
(1) employing a capacitor,
(2) employing an inductor,
(3) employing a capacitor and inductor combination.
EMI Propagation Mode and Model of Noise Filter Suppression
EMI Source
EMI Source
Equipment or Device
Affected by EMI
r
q
e
w
r
q
e
w
qConduction mode eConduction mode Radiation mode
wRadiation mode rRadiation mode Conduction mode
Equipment or Device
Affected by EMI
EMI Filter
EMI Filter
Shield Shield
EMI Filter
EMI Filter
Continued on the following page.
Principles of Noise Suppression by DC EMIFILr
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
209
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
5. High frequency Capacitor Characteristics Used
for EMI Suppression Filters
Even general-purpose capacitors can be used for noise
suppression. However, since noise has an extremely high
frequency range, general-purpose capacitors may not
function as effective bypass capacitors, due to the large
residual inductance built into the capacitor.
All the capacitors used in Murata's EMI suppression
filters employ a three terminal structure or thru-type
structure, which functions effectively even at high
frequencies, thereby minimizing the influence of residual
inductance. Consequently, an effective filter circuit can be
formed even at frequencies exceeding 1GHz.
(Refer to Fig.)
Equivalent circuit of general-purpose capacitor and
three terminal capacitor in the high frequency area
and comparison of insertion loss
(a) Construction of capacitor
(b) Equivalent circuit of capacitors which is concerning ESL effect.
(c) Improvement of Insertion Loss Characteristics
6. Inductive Noise Suppression
When an inductor is inserted in series in a noise
producing circuit (See Fig.), its impedance increases with
frequency. In this configuration it is possible to attenuate
and eliminate noise components (high frequency
components). The Murata EMI suppression filter
functions in this way.
Inductive Noise Suppression
4. Capacitive Noise Suppression
When a capacitor is connected (bypass capacitor) to
ground from a noisy signal line or power line, the circuit
impedance decreases as the frequency increases. Since
noise is a high frequency phenomenon, it flows to ground
if a capacitor has been connected to ground, thereby
making it possible to eliminate noise. (See Fig.)
EMI suppression filters employing a capacitor in this way
are used to eliminate this type of noise.
Capacitive Noise Suppression
Continued from the preceding page.
Noise+Signal/DC Power Signal/DC PowerNoise Z =
f : Frequency
c : Capacitance Value
2πfc
1
Two terminal capacitor
Dielectric
Electrode
Lead
Dielectric
Electrode
Lead
Three terminal capacitor
1
80
60
40
20
0
5 10 50
Frequency (MHz)
Insertion Loss (dB)
100 500 1000
C=2200pF
Three terminal capacitor
(Built-in Bead)
(DSS9HB32E222Q55)
Three terminal capacitor
(DSN9HB32E222Q55)
Ideal
Characteristic of
capacitor
Two terminal
capacitor
Continued on the following page.
Noise+Signal/DC Power Signal/DC Power
Noise
Z =
f : Frequency
L : Inductance Value
2πfL
Principles of Noise Suppression by DC EMIFILr
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
210
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
7. Characteristics of Inductors Used
in EMI Suppression Filters
General-purpose inductors also function to suppress
noise when configured in series with a noise producing
circuit. However, when general-purpose inductors are
used, resonance may result in peripheral circuits, signal
wave forms may become distorted, and satisfactory
impedance may not be obtained at noise frequencies
(due to insufficient high frequency impedance
characteristics).
The inductors used for Murata's EMI suppression filters
are designed to function nearly as a resistor at noise
frequencies, which greatly reduces the possibility of
resonance and leaves signal wave forms undistorted.
And since sufficient impedance is obtained for
frequencies ranging to hundreds of MHz, these
specifically designed inductors operate effectively to
suppress high-frequency noise. (See Fig.)
8. Capacitive-Inductive EMI Suppression Filters
If capacitive and inductive suppression characteristics are
combined, it is possible to configure a much higher
performance filter. In signal circuit applications where this
combination is applied, noise suppression effects which
have little influence on the signal wave form become
possible.
This type of filter is also effective in the suppression of
high-speed signal circuit noise. When used in DC power
circuits, capacitive-inductive filters prevent resonance
from occurring in peripheral circuits, thus making it
possible to achieve significant noise suppression under
normal service conditions.
Equivalent Circuit
(Resistance element becomes dominant at high frequency.)
Example of impedance frequency characteristics of
inductor type EMIFILr
BL02RN2
9. Other EMI Suppression Filters
In addition to the capacitive-inductive filter, Murata also
has an EMI suppression filter (EMIGUARDr) combining
a capacitor with a varistor, useful for surge absorption;
and a common mode choke coil effective, for common
mode noise suppression.
Murata also has a range of built-in filter connectors which
greatly reduce filter mounting space requirements.
Continued from the preceding page.
Continued on the following page.
R(f)
0.5 1
0
20
40
60
80
100
120
140
160
2 5 10 20
Frequency (MHz)
Impedance (Ω)
50 100 200 5001000
Z
R
X
Principles of Noise Suppression by DC EMIFILr
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
211
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
10. Expressing EMI Suppression Filter Effects
EMI Suppression Filter effects are expressed in terms of
the insertion loss measured in the circuit, normally
specified in MIL-STD 220A. As shown in the 50Ω
impedance circuit in the Figure at right, insertion loss is
represented by the logarithmic ratio of the circuit output
voltage with and without a filter in the circuit, which is
multiplied by 20 and expressed in dB.
Therefore, an insertion loss of 20dB indicates an output
voltage ratio (B/C) of 1/10, and an insertion loss of 40dB
indicates an output voltage ratio (B/C) of 1/100.
Measuring Circuit of Insertion Loss
Measuring Circuit of Insertion Loss
Insertion Loss = 20 log B(dB)
C
Continued from the preceding page.
A(V)
(a) 50Ω
50Ω
B(V)
A(V)
(b) 50Ω
50Ω
C(V)
EMI
Suppression
Filter
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
212
• Simulation results with various charts are quickly displayed on your PC.
• Results can be displayed in standard format or user defined scaling.
• Simulates various types of circuits such as Differential Mode Transmission, ceramic
capacitor, EMIFILr, three terminal capacitor and chip ferrite beads.
• Provides a simulation function that selects best suited Chip EMIFILr.
Filters can be selected from
"frequency-impedance
characteristics" charts.
Select circuit.
Two ways of setting the
driver/receiver IC parameter
The logic IC of TTL and CMOS can
be selected from pull-down list or
the LCR values can also be created.
Impedance automatically
calculated.
Impedance characteristics of
transmission line are automatically
calculated.
http://www.murata.com/designlib/mefss/
EMIFILr is the trademark of Murata Manufacturing Co., Ltd.
This simulator can be downloaded from Murata's website.
Select circuit.
(Select a new simulation
circuit from File menu.)
Enter
"Input Signal".
Set Driver IC.
Select filter.
Set
Transmission
Line.
Set
Receiver IC.
Click
measuring
point.
(Only for chip ferrite bead)
(EMI filters or/and chip
capacitor from the pull-
down list.)
Click
"Start
Simulation"
button.
Simulation
results are
displayed.
Simulation results are shown
in the window.
Murata EMI Filter Selection Simulator Ver. 3.6.0
Murata EMI Filter Selection Simulator Ver. 3.6.0
Select a new simulation circuit from File
menu.
New products are available
This button allows you to see more
information at web catalog.
(Need connection to the Internet)
Link to the web catalog is available
Link to the web catalog is available
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note C31E.pdf
08.9.1
