Fluke test leads, probes and clips Test leads for all your measurement needs For electronic applications TP80 Electronic Test Probes * Tapered tip ideal for probing electronic components or boards Removable guard for IC probing CAT III 1000 V, 10 A * * TP920 Test Probe Adapter Kit * IC test tip adapters, TL80A Basic Electronic Test Lead Set * 6 piece set with zippered case * Probes, alligator clips and tip extenders for electronic applications * CAT II 300 V TL910 Electronic Test Probes with Replacement Tips * Small profile provides accessibility * Comes with 5 sets of replaceable tips * Replacement tips: TP912 * CAT III 1000 V, 3 A TL81A Deluxe Electronic Test Lead Set * 22 piece set with quadfold pouch * Includes mini alligator clips, hooks and pincers for virtually every electronic need * Slide-on lC probe tip adapter and test lead couplers * Both modular test leads and lead-probe combinations * CAT II 300 V * * * * TL40 Retractable Probe Assembly * Retractable, insulated sharp probe tip CAT II 300 V, 2 A * For automotive applications TL26A Telecom Test Lead Set New! TP40 Automotive Back Probe Pin Set New! TP81, TP82 and TP84 * * * High-voltage probes 80K-6, 80K-15, 80K-40 High Voltage Probes * Allows a digital multimeter TP88 Rigid Backprobe * * 2 inch long pins pass between the weather pack seal and wire Use with Fluke TL71 or TL75 test lead sets Rated to 60 V dc * * test clips for telecommunications applications Flexible silicone insulated leads are heat and cold resistant CAT I 30 V, 8 A * Set of five 1.5 inch pins Rated to 60 V dc * Provide an easy * Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire * Design provides complete insulation while working on fuel injectors or sensors * TP81 for use with modular test leads (Fluke TL224) * TP82 slips over probe tips (Fluke TL71) * TP84 is 12 inches long to reach farther into engine compartments. * Rated to 60 V dc New! * 5-way multipoint connection past weather pack seals to connector conductors Use with Fluke TL71 or TL75 test lead sets New piercing probes for Automotive applications. Control the depth as you pierce insulation. Pin Set extended tips, medium alligator clips fit over TL71 and TL75 test lead sets IC test tip Adapter, 3 A Extended probe tip, 3 A Med. alligator clip, 5 A CAT II 300 V New! TL82 Automotive Pin & Socket Adapter Set * Collection of male and female adapters allows you to make firm connection to pin and socket connectors * Adapters with flexible tips come in the following sizes: 22, 20, 16 and 12 * Rated to 60 V dc * * * to measure up to 6,000 volts peak, 15,000 volts peak and 40,000 volts peak respectively 1000:1 division ratio output when connected to 10 MW multimeter Ground clip included Intended for low energy applica- tions that are referenced to ground 80K-15 (not available in Europe) For more information and detailed specifications, go to www.fluke.com/accessories Accessories 63