RF Coax Connectors Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount bulkhead BNC version available Drop-in replacement for Tyco Electronics standard BNC printed circuit board connectors One-piece design and robotic capacity to reduce assembly time Tyco Electronics capacitively decoupled connectors provide the fast, better way to reduce noise and reduce ground loops on coaxial interconnections. The highfrequency noise generated by fast rise times can cause both false triggering of circuits as well as emissions that can be radiated or conducted outside the equipment. Such emissions can interfere with nearby equipment. Ground loops are also a problem for networked systems. Ground loops are caused when two interconnected units are at different voltage potentials. The typical way to handle such EMI and ground loop problems is to decouple the cable shield from the ground panel by soldering a ceramic disk capacitor between the cable shield and the panel. The capacitor shunts high-frequency noise to ground. While effective, this approach is time consuming and expensive. The Capacitively Decoupled connector has built-in chip capacitors. These capacitors establish the electrical contact between the outer shield and a clip. This clip provides a short electrical path between the capacitors and panel. As a result, high-frequency noise is effectively shunted to ground, while the DC path is blocked. The connectors offer compatibility in design and manufacture. The same footprint and dimensional envelope make them a drop-in replacement for Tyco Electronics standard BNC or TNC printed circuit board connectors. In addition, they can be robotically picked and placed for highspeed automated assembly to pc boards. Product Specification 108-1263 -- BNC Decoupled PCB Press-Fit Connection 108-1269 -- BNC Decoupled PCB Connectors 108-1490 -- BNC Decoupled Cable Mount 82 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) PC Board/Panel Mount Jacks Decoupled to Panel Style A Vertical BNC 15.08 [.625] Material Body -- VALOX, black Dielectric -- Polymethylpentene 20.96 [.825] Note: Both styles are shown with a standard clip. See next page for other clip styles. For height dimensions see chart on page 85. 34.93 [1.375] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 12.83+0.13 -0.00 5.08 0.05 .002] 2.54 0.05 [.200 [.100 .002] 10.16 0.08 [.400 .003] [.505+.005] -.000 Dia. 0.89 0.08 [.035 .003] G S 10.16 0.08 [.400 .003] 5.54+0.08 -0.00 [.218+.003] -.000 (Top View) Maximum Panel Thickness 6.1 [.240] Recommended PC Board Layout Recommended Panel Cutout Style B Right-Angle BNC B CL 20.96 [.825] A 10.16 0.08 [.400 .003] 2.01 0.08 [.079 .003] (2 Holes) 34.93 [1.375] 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] G S Mating Face 0.89 0.08 [.035 .003] 5.54+0.08 -0.00 [.218+.003] -.000 (Top View) Recommended PC Board Layout Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout VALOX is a trademark of General Electric Company. 83 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) Clip Styles 19.30 Max. [.760] Clip Width 14.76 Clip [.581] Width 20.96 [.825] 20.96 [.825] Standard Flush For closer centerline-to-centerline connector spacing .304 [.012] .304 [.012] 2.54 [.100] Max. Recommended Panel Mount 2.54 [.100] Max. Recommended Panel Mount 20.96 [.825] Extended For use with or without a jam nut Shortening Bar 20.96 [.825] Short Electrical Path For reduced series inductance in ground path 84 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) PC Board/Panel Mount Jacks Decoupled to Panel Mounting Post Styles (Continued) L L Standard Compliant BNC Description Capacitance/ Voltage Clip Mounting Post Vertical 50 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC 20000pF 500VDC 7900pF 1600VDC 9400pF 1500VDC 9400pF 1500VDC Standard Standard Standard Right-Angle 50 Standard Right-Angle W/O Mounting Post 502 Low Profile Right-Angle 50 Low Profile RightAngle W/Special Clip & High Temperature Housing 50 Low Profile Right-Angle W/High Temperature Housing 50 Low Profile Right-Angle 75 Ultra Low Profile Right-Angle 75 L Mounting Post Length 3.48 .137 4.01 .158 2.79 .110 B* A* Style1 Part No. -- -- A 5413476-2 8.59 .338 8.59 .338 8.59 .338 6.91 .272 6.91 .272 6.91 .272 6.91 .272 6.91 .272 B 5413524-2 B 5413524-5 B 5414215-1 B 5413515-2 B 5413515-3 B 5413515-7 B 5413515-8 B 5413515-9 Standard Standard Standard Compliant Standard -- -- Standard Standard Standard Standard Standard Compliant Standard Compliant Standard Compliant 4.01 .158 4.01 .158 2.79 .110 4.70 .185 2.79 .110 15.88 .625 15.88 .625 15.88 .625 13.18 .519 13.18 .519 13.18 .519 13.18 .519 13.18 .519 9400pF 500VDC Extended Compliant 2.79 .110 13.18 .519 6.91 .272 B 5414284-2 9400pF 500VDC Flush Compliant 4.70 .185 13.18 .519 6.91 .272 B 5414352-1 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC Standard Standard B 5414094-2 Standard 5415103-1 Compliant 11.68 .460 11.68 .460 -- Standard 13.18 .519 6.17 .243 6.17 .243 -- Standard 4.01 .158 4.01 .158 2.79 .110 -- 5415103-2 1See pages 83 and 84 for Connector Styles. customer drawing for PC Board Layout. *See page 83 for dimension reference. 2See Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 85 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) Right-Angle BNC Jack PC Board/Panel Mount Decoupled to Panel ESD Protected ESD Protection ESD Device See page 83 Style B for panel cutout and recommended PC board configuration. 1/2-28 Thread Note: See Tyco Electronics Customer drawing for voltage breakdown rating. Description Capacitance/ Voltage Contact Plating Clip Mounting Post L Mounting Post Length B* A* Part No. 7900pF 1500VDC Gold1 Standard Compliant 2.79 .110 13.18 .519 6.91 .272 5414651-3 9400pF 1500VDC Gold1 Standard Standard 4.01 .158 15.88 .625 8.59 .338 5415085-1 9400pF 1500VDC Gold1 Flush Compliant 2.79 .110 13.18 .519 6.91 .272 5415216-1 50 Product Low Profile Right-Angle W/ ESD Protection 75 Product Standard Right-Angle W/ ESD Protection Low Profile Right-Angle ESD Protected *See page 83 for dimension reference. Right-Angle BNC Jack PC Board/Panel Mount Decoupled to Board ESD Protected Capacitance 9400pF 13.18 [.519] Voltage 1500VDC ESD Device Compliant Board Lock Part No. 5415205-1 2.01 0.08 [.079 .003] Dia. 2 Holes 10.16 0.08 [.400 .003] + 0.13 12.83 - 0.00 .005 ] [.505 +- .000 Dia. 0.89 0.08 [.035 .003] Dia. 2 Holes + 0.13 11.13 - 0.00 .005 ] [.438 +- .000 2.54 0.05 [.100 .002] 5.08 0.05 [.200 .002] Recommended PC Board Layout Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 86 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) Press-Fit, Vertical BNC Jacks, PC Board Mount Decoupled to Board 17.48 Sq. [.688] 12.70 [.500] 6.35 [.250] 1.02 0.08 Dia. [.040 .003] 3 Plc. Plated Thru Hole Material 12.70 [.500] 1.70 Dia. [.067] 2 Plc. Plated Thru Hole For Drive Screw Dielectric-- TEFLON Isolation Pad -- Polyester Plating Body -- Nickel Ground Clip -- Nickel Center Contact -- Gold Action Pin Legs -- Gold 6.35 [.250] 15.88 Max. [.625] Ground Area 9.14 [.360] Dia. OD 6.35 [.250] Dia. ID Recommended PC Board Layout Part No. 5414553-1 50 Ohm Part No. 5414493-4 75 Ohm BNC Bulkhead Jacks, Crimp 12.83+0.13 40.64 Max. [1.600] -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] 16.51 [.650] Max. over points RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style RG 58, 58A, 58B, 58C RG 174, 174A, 316, 188, 188A RG 174, 174A, 316, 188, 188A RG 179, 187 Hex Crimp Hex Crimp Hex Crimp Hex Crimp Gold Gold Gold Gold Nickel Nickel Nickel Nickel Polymethylpentene Polymethylpentene Polymethylpentene Polymethylpentene Commercial Commercial Commercial Commercial Description 50 50 50 75 ESD -.000 Recommended Panel Cutout Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 58436-1 58436-3 58436-3 58425-2 Part No. 5414758-1 5414758-2 5414758-3 5415779-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 87 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208