PHOTOCOUPLER
PS2581AL1,PS2581AL2
LONG CREEPAGE HIGH ISOLATION VOLTAGE
4-PIN PHOTOCOUPLER
NEPOC Series
Document No. PN10223EJ07V0DS (7th edition)
Date Published May 2009 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS2581AL1, PS2581AL2 are optically coupled isolators containing a GaAs light emitting diode and an NPN
silicon phototransistor in a plastic DIP (Dual In-line Package) to realize an excellent cost performance.
Creepage distance and clearance of leads are over 8 millimeters.
The PS2581AL2 is lead bending type (Gull-wing) for surface mounting.
FEATURES
• Long creepage and clearance distance (8 mm)
• High isolation voltage (BV = 5 000 Vr.m.s.)
• High-speed switching (tr = 5 s TYP., tf = 7 s TYP.)
• Ordering number of tape product: PS2581AL2-E3, E4: 1 000 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• BSI approved: No. 8243, 8244
• SEMKO approved: No. 900268
• NEMKO approved: No. P06206563
• DEMKO approved: No. 314846
• FIMKO approved: No. FI 24751
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862
APPLICATIONS
• Power supply
• Telephone/FAX.
• FA/OA equipment
• Programmable logic controller
<R>
Data Sheet PN10223EJ07V0DS
2
PS2581AL1,PS2581AL2
PACKAGE DIMENSIONS (UNIT : mm)
PHOTOCOUPLER CONSTRUCTION
Unit (MIN.)
8 mm
8 mm
4 mm
0.4 mm
Data Sheet PN10223EJ07V0DS
3
PS2581AL1,PS2581AL2
MARKING EXAMPLE
<R>
Data Sheet PN10223EJ07V0DS
4
PS2581AL1,PS2581AL2
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application
Part Number *1
PS2581AL1
PS2581AL1-A
Pb-Free
Magazine case 100 pcs
Standard products
PS2581AL1
PS2581AL2
PS2581AL2-A
(UL, CSA, BSI, NEMKO,
PS2581AL2
PS2581AL2-E3
PS2581AL2-E3-A
Embossed Tape 1 000 pcs/reel
SEMKO, DEMKO, FIMKO,
PS2581AL2-E4
PS2581AL2-E4-A
DIN EN60747-5-2
PS2581AL1
PS2581AL1-Y-A
Special version
Magazine case 100 pcs
(VDE0884 Part2)
PS2581AL1
PS2581AL2
PS2581AL2-Y-A
(Pb-Free and
Approved products)
PS2581AL2
PS2581AL2-E3
PS2581AL2-Y-E3-A
Halogen Free)
Embossed Tape 1 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Diode
Reverse Voltage
VR
6
V
Forward Current (DC)
IF
30
mA
Power Dissipation Derating
PD/ C
1.5
mW/ C
Power Dissipation
PD
150
mW
Peak Forward Current*1
IFP
0.5
A
Transistor
Collector to Emitter Voltage
VCEO
70
V
Emitter to Collector Voltage
VECO
5
V
Collector Current
IC
30
mA
Power Dissipation Delay
PC/ C
1.5
mW/ C
Power Dissipation
PC
150
mW
Isolation Voltage*2
BV
5 000
Vr.m.s.
Operating Ambient Temperature
TA
55 to +100
C
Storage Temperature
Tstg
55 to +150
C
*1 PW = 100 s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10223EJ07V0DS
5
PS2581AL1,PS2581AL2
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Diode
Forward Voltage
VF
IF = 10 mA
1.2
1.4
V
Reverse Current
IR
VR = 5 V
5
A
Terminal Capacitance
Ct
V = 0 V, f = 1.0 MHz
10
pF
Transistor
Collector to Emitter Dark
Current
ICEO
VCE = 70 V, IF = 0 mA
100
nA
Coupled
Current Transfer Ratio
(IC/IF)*1
CTR
IF = 5 mA, VCE = 5 V
50
400
%
Collector Saturation
Voltage
VCE (sat)
IF = 10 mA, IC = 2 mA
0.13
0.3
V
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
1011
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
0.4
pF
Rise Time*2
tr
VCC = 10 V, IC = 2 mA, RL = 100
3
s
Fall Time*2
tf
5
*1 CTR rank
N : 50 to 400 (%)
H : 80 to 160 (%)
Q : 100 to 200 (%)
W : 130 to 260 (%)
L : 200 to 400 (%)
*2 Test circuit for switching time
<R>
<R>
<R>
Data Sheet PN10223EJ07V0DS
6
PS2581AL1,PS2581AL2
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
<R>
Data Sheet PN10223EJ07V0DS
7
PS2581AL1,PS2581AL2
Remark The graphs indicate nominal characteristics.
Data Sheet PN10223EJ07V0DS
8
PS2581AL1,PS2581AL2
TAPING SPECIFICATIONS (UNIT : mm)
Data Sheet PN10223EJ07V0DS
9
PS2581AL1,PS2581AL2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260 C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220 C 60 seconds or less
• Time to preheat temperature from 120 to 180 C 120 30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
• Temperature 260 C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120 C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350 C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 C.
Data Sheet PN10223EJ07V0DS
10
PS2581AL1,PS2581AL2
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10223EJ07V0DS
11
PS2581AL1,PS2581AL2
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Spec.
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 UIORM, Pd 5 pC
UIORM
Upr
1 130
1 695
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM, Pd 5 pC
Upr
1 669
Vpeak
Highest permissible overvoltage
UTR
8 000
Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
CTI
175
Material group (DIN EN 60664-1 VDE0110 Part 1)
III a
Storage temperature range
Tstg
–55 to +150
°C
Operating temperature range
TA
–55 to +100
°C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 C
VIO = 500 V dc at TA MAX. at least 100 C
Ris MIN.
Ris MIN.
1012
1011
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
175
400
700
109
C
mA
mW
<R>
Data Sheet PN10223EJ07V0DS
12
PS2581AL1,PS2581AL2
PS2581AL1,PS2581AL2
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.