February 2016
CAPACITORS
Type: CS45 [SL, B, E, F characteristics, Eac: X1:440V, Y2:300V]
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors
CS45 series
Commercial Grade, Safety Standard Approved
(2/10)
20160219 / leaddisc_commercial_cs45_en.fm
CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors, Commercial Grade, Safety Standard Approved
FEATURES
Compliant with IEC and the safety standards of various countries.
Rated at a withstand voltage of AC.2600V.
Flame-resistant reinforced outer insulation prevents fires, electrical shock, and other potential hazards.
These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material.
Compatible with halogen-free external resin coating.
APPLICATION
For use in Y capacitor for AC adapter, charger, power supplies
PART NUMBER CONSTRUCTION
Please refer to P-6~9 about the product dimensions.
OPERATING TEMPERATURE RANGE
The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C.
The storage temperature range applies to after MLCC is mounted on board.
Overview of CS45 Series
CS45 - E 2GA 102 M - □KA
Series nameTemperature
characteristics Rated voltage Nominal
capacitance
Capacitance
tolerance Lead type Application
classification Internal code
SL +350 to
–1000ppm/°C 2GA X1:440V
Y2:300V
100 10pF J ±5% G Long lead KSafety
standard
A Halogen-free
221 220pF K ±10% N Short lead
B ±10% 472 4,700pF M ±20% V Taping
E +20, –55%
F +30, –80%
Temperature
characteristics
Temperature range
Operating temperature
（°C）
Storage temperature
（°C）
SL –25 to +125 –25 to +125
B–25 to +125 –25 to +125
E–25 to +125 –25 to +125
F–25 to +125 –25 to +125
Product compatible with RoHS directive
Halogen-free
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
Overview of CS45 Series
PACKAGE QUANTITY
CERTIFIED STATUS OF VARIOUS COUNTRIES
* Certificate numbers shall be changed owing to the revisions of the related standards.
Type
Package quantity
Taping (pieces / box) Bulk (pieces / bag)
CS45 1000 1000
Safety
standard IEC standard No. Standard No. Temperature
characteristics Class Rated
voltage
Approval report No.*
Taiwan Xiamen
ENEC
IEC 60384-14
EN 60384-14
SL,B,E,F
X1, Y2 X1:440V AC
Y2:300V AC
ENEC-01049
UL UL60384-14 E37861
cUL/CSA
SAA AS3250 CS6268
CQC IEC 60384-14 CQC14001112768 CQC14001112449
KTL K60384-14 X1 440V AC SZ03001-12006 SU03047-12006
Y2 300V AC SZ03001-12008 SU03047-12008
(5/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
Overview of CS45
RECOMMENDED FLOW PROFILE
Preheating Peak Natural cooling
Temp. Time Temp. Time Time
T1 t1 T2 t2 t3
110°C min. 30 to 60s. 260°C Within 10s. Over 60s.
Natural
cooling
Preheating
Soldering
T2
T1
t:
Time
t1 t2 t3
T:
Temperature
(6/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
CS45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: SL (+350 to -1000ppm/°C)
Rated Voltage Eac: X1:440V, Y2:300V
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-10 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Capacitance
(pF)
Capacitance
tolerance
Dimensions (mm)
Part No.
D max. T max. F
(Applied to bulk)
F
(Applied to taping) d
10 ±5% 7.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45SL2GA100J-□KA
15 ±5% 7.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45SL2GA150J-□KA
22 ±5% 7.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45SL2GA220J-□KA
33 ±5% 7.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45SL2GA330J-□KA
47 ±5% 7.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45SL2GA470J-□KA
68 ±5% 7.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45SL2GA680J-□KA
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
Vertical kink
Item Markings Specifications Marking examples
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
CS
10
J
440〜X1
300〜Y2
54
CS45 series
10pF
±5%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
25min.
4max.
D
F d
T
5±1 4max.
D T
F d
16+1.5
–0.5 4max.
D T
F d
CS
10J
54
(Marking position is reference.)
Front Back
(7/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
CS45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: B (±10%)
Rated Voltage Eac: X1:440V, Y2:300V
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-10 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Capacitance
(pF)
Capacitance
tolerance
Dimensions (mm)
Part No.
D max. T max. F
(Applied to bulk)
F
(Applied to taping) d
100 ±10% 6.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-B2GA101K-□KA
150 ±10% 6.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-B2GA151K-□KA
220 ±10% 6.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-B2GA221K-□KA
330 ±10% 6.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-B2GA331K-□KA
470 ±10% 7.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-B2GA471K-□KA
680 ±10% 8.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-B2GA681K-□KA
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
Vertical kink
Item Markings Specifications Marking examples
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
CS
101
K
440〜X1
300〜Y2
54
CS45 series
100pF
±10%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
25min.
4max.
D
F d
T
5±1 4max.
D T
F d
16+1.5
–0.5 4max.
D T
F d
CS
101K
54
(Marking position is reference.)
Front Back
(8/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
CS45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: E (+20, –55%)
Rated Voltage Eac: X1:440V, Y2:300V
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-10 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Capacitance
(pF)
Capacitance
tolerance
Dimensions (mm)
Part No.
D max. T max. F
(Applied to bulk)
F
(Applied to taping) d
1,000 ±20% 6.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-E2GA102M-□KA
1,500 ±20% 7.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-E2GA152M-□KA
2,200 ±20% 8.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-E2GA222M-□KA
3,300 ±20% 10.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-E2GA332M-□KA
4,700 ±20% 11.0 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-E2GA472M-□KA
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
Vertical kink
Item Markings Specifications Marking examples
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
CS
102
M
440〜X1
300〜Y2
54
CS45 series
1000pF
±20%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
25min.
4max.
D
F d
T
5±1 4max.
D T
F d
16+1.5
–0.5 4max.
D T
F d
CS
102M
54
(Marking position is reference.)
Front Back
(9/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
CS45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: F (+30,–80%)
Rated Voltage Eac: X1:440V, Y2:300V
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-10 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Capacitance
(pF)
Capacitance
tolerance
Dimensions (mm)
Part No.
D max. T max. F
(Applied to bulk)
F
(Applied to taping) d
10,000 ±20% 14.5 5.0 7.5±1.5 7.5±0.8 0.6±0.05 CS45-F2GA103M-□KA
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
Vertical kink
Item Markings Specifications Marking examples
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
CS
103
M
440〜X1
300〜Y2
54
CS45 series
10000pF
±20%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
25min.
4max.
D
F d
T
5±1 4max.
D T
F d
16+1.5
–0.5 4max.
D T
F d
CS
103M
54
(Marking position is reference.)
Front Back
(10/10)
20160219 / leaddisc_commercial_cs45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
CS45 Type
TAPING DIMEMSIONS
AMMO PACK INNER BOX SIZE
Item Symbol Dimensions(mm) Remarks
Body diameter D Depends on the specification of each product.
Body thickness T Depends on the specification of each product.
Lead-wire diameter ød 0.6±0.05
Pitch of component P 15.0±1.0 Including the slant of body
Feed hole pitch P015.0±0.3 Excepting the tape splicing part
Feed hole center to lead P13.75±0.7
Feed hole center to component center P27.5±1.3
Lead-to lead distance F 7.5±0.8 Measuring point is bottom kink
Component alignment 'h 0±2.0 Including the slanting body due to bending lead-wire
Tape width W 18.0+1.0, –0.5
Adhesive tape width W010.0min.
Hole position W19.0±0.5
Adhesive tape position W24.0max. Adhesive tape do not stick out the tape
Bottom of kink from tape center H016.0+1.5, –0.5
Height of body from tape center H146.0max.
Lead-wire protrusion 1.0max.
Feed hole diameter D04.0±0.2
Total tape thickness t 0.6±0.3 Including adhesive tape
Length of snipped lead L 11.0max.
Coating on lead C 4.0max.
Height of kink A 4.0max. Measuring point is bottom kink
Spring action S 2.0max.
P
P2
D
P0
D0
ød
A
H0
W
H1
W1
T
ΔhΔh
S
H0C
L
t
W0W2
FP1
340max.
60max.
320max.
Dimensions in mm
• For more information about products with other capacitance or other data, please contact us.
